Zdravko Stanimirović

Institute for Telecommunications and Electronics IRITEL

Dr. Zdravko Stanimirović has been active in research and development work for more than 20 years. He received his M.S. and Ph.D. degrees in electrical engineering from the Faculty of Electrical Engineering, University of Belgrade, the Republic of Serbia in 1999 and 2007, respectively. Dr. Z. Stanimirović is currently an associate research professor at Telecommunications and Electronics Institute IRITEL a. d. Beograd. He has predominantly worked in the field of thick-film technology, particularly modeling of low-frequency noise in thick-resistive films. Over the years he has published more than 70 scientific manuscripts including 6 book chapters and participated in several scientific projects funded by Ministry of Education, Science and Technological Development of the Republic of Serbia. Dr. Z. Stanimirović is the recipient of the IEEE Transactions on Components & Packaging Technologies best paper award. His current research interests include Micro/Nano Electro-Mechanical Systems and micro- and nano-scale sensors.

1books edited

5chapters authored

Latest work with IntechOpen by Zdravko Stanimirović

To present their work in the field of micromachining, researchers from distant parts of the world have joined their efforts and contributed their ideas according to their interest and engagement. Their articles will give you the opportunity to understand the concepts of micromachining of advanced materials. Surface texturing using pico- and femto-second laser micromachining is presented, as well as the silicon-based micromachining process for flexible electronics. You can learn about the CMOS compatible wet bulk micromachining process for MEMS applications and the physical process and plasma parameters in a radio frequency hybrid plasma system for thin-film production with ion assistance. Last but not least, study on the specific coefficient in the micromachining process and multiscale simulation of influence of surface defects on nanoindentation using quasi-continuum method provides us with an insight in modelling and the simulation of micromachining processes. The editors hope that this book will allow both professionals and readers not involved in the immediate field to understand and enjoy the topic.

Go to the book