Open access peer-reviewed chapter

Active and Intelligent Packaging of Cheese: Developments and Future Scope

Written By

Gaurav Kr Deshwal and Narender Raju Panjagari

Submitted: 28 November 2020 Reviewed: 15 December 2020 Published: 03 February 2021

DOI: 10.5772/intechopen.95502

From the Edited Volume

Natural Food Additives

Edited by Miguel A. Prieto and Paz Otero

Chapter metrics overview

768 Chapter Downloads

View Full Metrics


Technological advances and changes in consumer preferences for safer food with better shelf life have led to packaging innovations like smart packaging. Smart packaging systems involve the blend of active and intelligent packaging properties. Most of the smart packaging systems in food sector are mainly focused on fish, sea, food, meat, poultry, fruits and vegetables. With cheese being the major dairy product and its market expanding exponentially, smart packaging systems for cheese are exhaustively addressed in this book chapter. Some of the smart packaging systems pertaining to cheese like antioxidant releasers, antimicrobial packaging, ripening indicator and self-cleaning rinds can hasten commercial acceptance and reliability of cheese products. This book chapter also tabulates the recent data related to production, and consumption of cheese, permitted additives, types of active and intelligent packaging systems explored for cheese and commercial suppliers of smart packaging systems. Along with, future research directions for smart packaging of cheese are also presented.


  • active packaging
  • intelligent packaging
  • cheese
  • dairy products

1. Introduction

Packaging industry stands at third position globally, next to food and petroleum industries contributing nearly 2% of Gross National Product in developed nations [1]. Approximately 51% of all packaging applications are dedicated to food sector [2]. Consumer inclination towards safe and healthy food have led to the development of state-of-the-art and unique approaches in food processing and packaging. One such development is the introduction of smart packaging technologies. Smart packaging although interchangeably used for intelligent packaging at times, refers to combination of active and intelligent packaging [3]. The Framework Regulation on Food Contact Materials (1935/2004) defines “active materials and articles” as materials intended to extended the shelf-life or to maintain or improve the condition of packaged food; they are designed to deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food. Similarly, according to Framework Regulation (EC) No. 1935/2004 materials and articles which monitors the condition of packaged food or the environment surrounding the food are defined as “intelligent materials and articles” [2]. Most of the smart packaging interventions in food sector are limited to fruits and vegetables, fish products, meat and seafood [4] indicating huge scope and potential to be explored for dairy products.

Active and intelligent packaging market was estimated at 17.50 billion US $ in 2019 and expected to reach at 25.16 billion US $ by 2025 witnessing a CAGR of 6.78%. Asia Pacific region was identified as the fastest growing market including China, Japan, India and South Korea and North America as the largest market with WestRock®, Honeywell®, BASF® and Amcor Ltd. as the major market players. Oxygen and moisture scavengers are the utmost commercialized forms of active packaging. Gas scavengers for food was the most marketed active packaging technique in USA during 2018–2019 [5]. During past ten years, the research interestedness in active and intelligent packaging has increased steadily as indicated by the trend of peer-reviewed publications in Figure 1 during 2010–2019. As per a survey conducted by O’Callaghan and Kerry (2016) [6] for applicability of smart packaging to cheese, the future is highly optimistic with consumers willing to pay more on receiving the information provided by these advanced technologies. However, to the best of our knowledge, not a single article has reviewed the application and future research directions of smart packaging technologies in cheese. Therefore, the present review offers insight to active and intelligent packaging systems for cheese and future research aspects.

Figure 1.

Graph illustrating the number of publications on active packaging, intelligent packaging and cheese during the year 2010–2019 (Source: compiled from SCOPUS using document search with title, abstract, keywords).


2. Status of cheese market

World cheese production has shown significant increase from 5.43 million tonnes in 1961, 14.58 million tonnes in 1995 to 22.65 million tonnes in 2015 [7]. About 3000 varieties of cheeses are produced throughout the world and the annual total cheese consumption during 2015–2028 is expected to grow at a CAGR of 1.4% [8]. EU 28 (European Union consisting of 28 countries) stood at first position in cheese export by exporting 841.8 thousand tonnes of cheese. The USA accounted for almost 20% of the world’s cheese production and exported 348.5 thousand tonnes of cheese contributing 13.8% of the total export share during 2018 while Japan and Russia were the top export destination [8]. Approximately 40% of world’s milk is converted to cheese with France, USA, Iceland, Finland and other developed nations being the major players in cheese production and consumption [7]. The total cheese production in USA was 5,908 million kg, with an import of 176 million kg [8]. Mozzarella is the highest produced cheese variety in USA and several other major cheese producing nations [9]. Additionally, the retail prices of cheese in almost all the countries had shown an upsurge during last ten years [8]. The detailed information about cheese production, consumption, import, export quantity of several countries and retail price of selected cheeses are presented in Table 1. The total whole cow milk cheese in India was 2250 tonnes in 2014 [7]. It is true that India is not a traditionally structured ‘cheese nation’ but it is gaining pace with increased domestic consumption and exports. India offers only 40 varieties of cheese of which about 60 per cent of the market is dominated by processed cheeses, 30 per cent by cheese spreads and the remaining 10 per cent by flavored and Mozzarella cheese [10].

CountryProductionConsumptionImportsExportsRetail Price
Cheese typeCurrencyPrice/kg
EU289376965259 (H)842 (H)
France1725 (A)1721117EmmentalEUR8.43
Italy1101 (A)132010100MozzarellaEUR4.46
Netherlands880 (A)420140GoudaEUR10.98
United Kingdom426795CheddarGBP7.28
Spain179 (A)416NSEUR8.60
Czech Republic135201EdamCZK144.73
Latvia4739Hard cheeseEUR7.89
Slovakia38 (A)74EdamEUR6.55
Cyprus3 (A)22
Other EU17179
North and Central America
El Salvador39
South America
Chile101 (B)198GoudaCLP6396.00
Other Europe
Switzerland190 (A)1866268NSCHF13.32
Ukraine168198Russian (50% fat)UAH172.00
Norway82 (C)101
Turkey753 (D)714
Israel146 (A)16051EdamILS41.30
India48 (E)MozzarellaINR380.00
Japan45 (F)321297ProcessedJPY1890.00
China41 (G)149124
Republic of Korea4156124NSKRW16,225.0
Saudi Arabia172
New Zealand385 (G)48323CheddarNZD8.84
South Africa108109NSZAR117.19
Total selected countries21,277
Rest of world865381

Table 1.

Cheese production, consumption, imports, exports (in ‘000 tonnes) and retail price during 2018–2019.

(A) Cow’s milk cheese only; (B) Based on production of big dairies; (C) 2018: Cow’s milk cheese- 72,600 tonnes; (D) 2018: Cow’s milk cheese- 658,500 tonnes; (E) Refers to co-operative dairies only; (F) Natural cheese production; (G) Including processed cheese; (H) Excluding Intra-EU trade; NS- Not specified (Source: compiled from Bulletin of the International Dairy Federation 501/2019).


3. Presently used cheese packaging systems

In order to simplify the cheese packaging requirements, its mandatory to classify them in several categories depending on their moisture content (hard, semi-hard, soft, very-soft), shapes (wheels or half-wheel cheese, cheese slabs also known as portioned cheese, sliced cheese, cheese squares, soft and creamy cheese, grated, diced and processed cheese) and preservation techniques (cheese preserved in brine, wax coated, modified atmosphere or vacuum packaged). The very hard, extra hard, hard to semi-hard category of cheese possess moisture content in the range of 36–52% and includes Edam, Gouda, Swiss, Parmesan, Cheshire and Romano [11]. Rindless types of cheese are ripened in their packaging material alike to cheeses having their surface covered with molds, bacteria or yeasts producing enzymes responsible for ripening [12]. The important factors for selecting packaging materials of very hard to hard varieties of cheese are ripening time, temperature, cheese surface area to volume ratio, gas production (if any), cheese product form (sliced, grated, portions) and permeability of packaging materials [13]. The packaging systems for rindless cheeses includes laminates of polyethylene terephthalate- low density polyethylene (PET-LDPE) (300/50 μm thickness), cover film of oriented (O)PET-LDPE (23/75 μm thickness), tubular bags of oriented polyamide (OPA)-LDPE (15/40 μm thickness) and trough film of PET-HMLDPE (high molecular weight LDPE) (200/25/25 μm thickness). Wax coatings (mineral, paraffin and microcrystalline wax) are used to prevent mold growth, moisture evaporation and high gas barrier properties [11]. Modified atmosphere packaging (MAP) with high barrier materials (PA/EVOH (ethylene vinyl alcohol), LLDPE/EVA (ethylene vinyl acetate)/Ionomers) is generally used for portioned or sliced hard cheese owing to their large surface area exposure to light and oxygen. Vacuum packaging is not preferred for cheese with eyes (Swiss, Gouda, Edam) as it rupture the eyes structure [14].

The semi-soft and soft varieties of cheese contain 52–80% moisture and can be further categorized broadly in three groups (i) ripened by bacteria e.g. Brick, Munster; (ii) ripened by surface mold e.g. Limburger, Brie, Camembert and (iii) internally mold ripened e.g. Gorgonzola, Roquefort, Stilton [15]. Packaging requirements of bacteria ripened cheeses is affected by presence of light, humidity, pH and gases. Internally mold ripened cheese should be packed in O2, CO2 and water permeable packages e.g. polystyrene, polyvinyl chloride or thermoformed packages etc., for optimum mold growth [3]. For externally ripened cheese, packaging should not take place until mold had grown to certain extent and packaging material with certain permeability to O2 and H2O are prerequisite to avoid growth of anaerobic proteolytic bacteria and moisture condensation inside cheese pack, respectively. Penicillium camemberti converts lactate to CO2 and H2O, hence perforated OPP (oriented polypropylene) is the suitable material for gas and water passage [16].

Fresh or unripened cheeses (e.g. cottage, quark, cream etc.) have moisture content greater than 80% and are exposed to lactic acid fermentation. Such cheeses have very high chances of dehydration or whey expulsion owing to their high-water activity. Some of the suitable packaging material for fresh cheeses are injection molded HDPE or PP packages with side slits for whey drainage, paraffin or PVDC (polyvinylidene chloride) coated paper and LDPE or PP laminated aluminum (Al) foil (7–20 μm) [14]. Processed cheese is hot filled into pouches, polymer coated or lacquered Al foils (12–15 μm). Processed cheese slices are packed in laminates of PET-HDPE, PET-PVDC and OPP-EVOH-LDPE and processed cheese spreads in tubes of LDPE/EVOH/PET or metal tubes, PP or PET-LDPE cups heat sealed with Al foil, tin plate or enameled Al cans and glass cups closed with Al foil plastic laminate or lidded with an easy opening tin plate [17]. A comprehensive list of permitted additives and their recommended usage level is presented in Table 2, which could be utilized for the development of legally permitted smart packaging materials. Also, a few commercially available smart packaging systems used for cheese are listed in Figure 2.

Name of the additive (&INS No.)Recommended maximum levels
Unripened cheese#Ripened cheesePlain processed cheese/processed cheese, processed cheese spreadNote
Aspartame (951)1000 mg/kgIf used in combination with aspartame-acesulfame salt (INS 962), combined maximum use level, expressed as aspartame, should not exceed this level.
Carotenoids100 mg/kg100 mg/kg
Chlorophylls and Chlorophyllin, copper complexes50 mg/kg100 mg/kg (Chlorophyll- INS No.-140)
Canthaxanthin (161 g)15 mg/kg15 mg/kgFor use in flavored products only
Caramel III - ammonia caramel (150c)15000 mg/kg
Caramel IV-sulfite ammonia caramel (150d)50000 mg/kg
Indigotine (Indigo carmine) (132)200 mg/kgFor use in surface treatment only
*Lauric arginate ethyl ester (243)200 mg/kgEquivalent to 2 mg/dm2 surface application to a maximum depth of 5 mm, For use in surface treatment only
Natamycin (Pimaricin) (235)40 mg/kg40 mg/kg40 mg/kg
Phosphates4400 mg/kg9000 mg/kgAs phosphorus
Polysorbates80 mg/kgOn the creaming mixture basis
Ponceau 4R (124)100 mg/kgFor use in surface treatment only
Riboflavins300 mg/kg300 mg/kg300 mg/kg
*Sorbates2000 mg/kg3000 mg/kg3000 mg/kgAs sorbic acid, For Chhana and paneer only)
Nisin (234)12.5 mg/kg12 mg/kg12.5 mg/kgFor Chhana and paneer only
Propionic acid, sodium propionate, calcium propionate (singly or in combination, expressed as propionic acid) (280, 281, 282, 283)3000 mg/kg3000 mg/kg
Glucono delta lactone (575)GMP
Sunset yellow FCF (110)100 mg/kg100 mg/kgFor use in surface treatment only
Calcium chloride (509)200 mg/kg200 mg/kgExcept cream cheese
Beta-carotenes, vegetable (160a(ii))600 mg/kg100 mg/kg1000 mg/kgExcept Coulommiers
Carrageenan (407)5000 mg/kgFor cream cheese only
Alginate of sodium/potassium/ calcium (410, 402, 404)5000 mg/kgFor cream cheese only
Propylene glycol alginate (405)5000 mg/kg
Paprika extract (160c)GMPGMP
Curcumin (100)GMP100 mg/kg100 mg/kg
Annatto (160b (i) and (ii))GMP$100 mg/kg
@50 mg/kg
50 mg/kg$(Norbixin based)
@(Bixin based)
Lysozyme (1105)GMP
Sodium salts of mono/di/poly phosphoric acid (339, 450 (i, ii, iii), 451 (i), 452 (i))9000 mg/kgTotal salt content should not exceed 9000 mg/kg calculated as phosphorous/carbonates /citrate/ chloride
Potassium salts of mono/di/poly phosphoric acid (340, 450 (iv, v), 451 (ii), 452 (ii))9000 mg/kg
Allura red AC (129)100 mg/kg
Diacetyltartaric and fatty acid esters of glycerol (472e)10000 mg/kg
Hydroxybenzoates, para300 mg/kgAs para-hydroxybenzoic acid
Iron oxides50 mg/kg
Sodium aluminum phosphates1600 mg/kgFor use in processed cheese only
As aluminum
Pimaricin (Natamicin) (235)2 mg/dm2 surface.For surface/rind treatment only
Not present in depth below 5 mm

Table 2.

Additives permitted in different varieties of cheese as per FSSAI (Food Safety and Standards Authority of India).

Ingredients permitted in whey cheese includes Lauric arginate ethyl ester (INS No.-243) - 200 mg/kg and Sorbates (1000 mg/kg).&INS- International Numbering System for food additives.

$Indicates the amount of annatto if it is norbixin based.

@It indicates the amount of annatto if it is bixin based.

#Ripened cheese- Cheddar, Danbo, Edam, Gouda, Havarti, Tilisiter, Camembert, Brie, Saint Paulin, Samsoe, Emmentaler, Provolone, extra hard grating/sliced/cut/shredded cheese.

Source: Compiled from Manual of Food Safety and Standards Authority of India

Figure 2.

Commercially available active and intelligent packaging systems for cheese (A) biodegradable active antifungal film Antipack™ AF, Handary, Brussels, Belgium (B) antimicrobial films with natamycin, VGP SL®, Barcelona, Spain (C) edible plastic films developed from casein by Lactips, France (D) pull timer™, time temperature indicator for indicating temperature abuse developed by Macfarlane labels and insignia technologies, Scotland. (Source: compiled from internet).


4. Active packaging of cheese: concepts and applications

“Active packaging” term was coined by food scientist Dr. Theodore Labuza [3], which includes oxygen absorbers, carbon dioxide absorbers/emitters, moisture absorbers, self-heating and self-cooling containers, antimicrobial packaging, ethanol emitters, flavor absorbers/releasers and microwave assisted containers [18]. The following section discusses different active packaging systems applicable to cheese and brief studies on active packaging materials for cheese and its products are also presented in Table 3.

Type of active packagingVariety of cheeseDescription
Antimicrobial packagingCottage cheese [19]Sachets of allyl isothiocyanate were effective against yeast and mold
Mozzarella cheese [13]Lysozyme and ethylenediaminetetraacetic disodium salt (Na2-EDTA) inhibited the growth of coliform and Pseudomonadaceae without affecting the lactic acid bacteria
Kashar Cheese [20]Zein and zein-wax coating with lysozyme, catechin and gallic acid. Lysozyme based film prevented the growth of Listeria monocytogens
Mozzarella cheese [21]Packages containing calcium lactate and lactic acid-based brine enhanced the shelf-life by 50%
Surface ripened cheese [22]Polyethylene films coated with polyvinyldichloride and containing natamycin/nisin possessed inhibitory effect against Penicillium expansum in surface ripened cheese i.e. Blatacke zlato and Olomoucke tvaruzky
Zamorano sheep cheese [23]Poly propylene and polyethylene terephthalate films with Origanum vulgare and ethyl lauroyl arginate essential oils inhibited E.coli O157:H7
Saloio cheese [24]Whey protein isolate coating containing natamycin reduced water loss, color changes and microbial growth throughout the storage period of 60 days
Oxygen absorbersLow fat cheese (5% fat in dry matter) [25]Microbial oxygen absorber; Contains microorganisms which utilizes oxygen e.g. Lactococcus lactis strain; Flavor and odor improved
High fat cheese (60% fat in dry matter) [25]Microbial oxygen absorber containing Lactococcus lactis strain; Flavor improved and no explicit difference on odor
Cheddar cheese [26]Microbial oxygen absorber containing Lactococcus lactis strain; Positive influence on shelf-life
Delite 5% sliced cheese [26]Microbial oxygen absorber containing Lactococcus lactis strain; Positive influence on product characteristics
Moisture absorbersSaloio cheese [27]Humidipak®, Moisture controlling sachets with sodium propionate impregnated over it to control mold growth. Extended the shelf significantly by decreasing the water loss
Camembert cheese [28]3-layered film with absorber/desorber film. 10% concentration of water absorbent, maintained attractive white appearance of cheese while 25% caused damage of the varnish layer due to swelling.
UV light absorbersCheese puffs [29]Tricalcium phosphate-based UV light inhibitor could be incorporated directly into dry mix flavor powder of cheese puffs cooked in hot oil to prevent light induced rancidity and spoilage.

Table 3.

Types of active packaging materials/systems explored for cheese and cheese-based products.

4.1 Moisture absorbers

The presence of moisture not only affects the package appearance but also leads to poor texture and quality of cheese both microbiologically and chemically. Moisture control in the cheese package reduces the water activity thus preventing microbial growth and leaching of soluble nutrients [17]. Moisture scavengers include desiccants like silica gel, molecular sieves, natural clays like calcium oxide, calcium chloride and modified starch in the form of pads, sheets, sachets and blankets [4]. Moisture control in cheese packages could also be attained by incorporating humectant between different layers of packaging material, while keeping the inside layer water permeable. A two layered packaging material for moisture sensitive products like soft cheese was developed by [30] Marbler & Parmentier, (1999). The packaging material consisted of first functional layer (coated paper) for storing and releasing moisture and second layer (plastic laminate) for controlling gas permeability as a function of moisture content. These types of packaging material find their utility for cheese matured inside the package. Pantaleao, Pintado, & Pocas (2007) [27] successfully demonstrated humidity controller (Humidipak®) with Saloio cheese for shelf-life extension. A dual compartment vacuum packaging system (Tenderpac®) developed by SEALPAC® (Germany) for neatly collecting the drip loss from meat products, could be optimized for fresh unripened cheeses like mozzarella, quarg and cottage [31].

4.2 Oxygen scavengers

Oxygen scavengers market size was 1.80 billion USD in 2016 which is estimated to reach 2.41 billion USD in 2022 at a compound annual growth rate (CAGR) of 5.1%. North America (USA, Canada and Mexico) is the leading market while Asia Pacific region (China, India, Japan and South Korea) is the fastest growing market [5]. Oxygen is majorly responsible for cheese spoilage as its presence facilitates the growth of aerobic microorganisms, oxidation of cheese components, nutritional value decline, off-flavors generation, unacceptable color changes, shelf-life reduction and decrease in food safety [32]. Therefore, control of oxygen content inside cheese package is of prime importance. Modified atmosphere packaging (MAP), vacuum packaging and oxygen absorbers are the alternatives available to reduce or completely remove oxygen from the package [25]. However, MAP and vacuum packaging require costly equipment for packing cheese and still do not remove the oxygen completely (residual oxygen could be up to 1% in the headspace). Vacuum packaging can affect the appearance and structure of soft cheeses adversely and oxygen can also permeate through the packaging film during later stages of storage or distribution [33]. Oxygen scavengers provide the best alternative to remove the oxygen permeating through the packaging film and also to overcome the challenges of MAP and vacuum packaging [34].

The shelf-life of cheese tarts increased to 48 days when packaged with an iron-oxide based oxygen scavenger as compared to 7 days for control samples [35]. An oxygen scavenging film containing a blend of ethylene, methyl acrylate and cyclohexene methyl acrylate copolymer as oxygen scavenger resin was developed to overcome the oxidative rancidity in cheeses, dried milk and meat products [36]. A study on the effectiveness of various packaging methods for Gouda cheese revealed that oxygen scavengers (ATCO FT 210) were as effective as vacuum packaging and MAP (40% CO2 and 60% N2) in prolonging its shelf-life [34]. Microbiological oxygen scavenging material consisting of Lactococcus lactis strain was reported to consume oxygen in cheese packs with limited production of acetoin and diacetyl [25]. Graviera cheese when packed using a combination of oxygen scavenger and ethanol emitter showed lower microbial growth as compared to 100% nitrogen modified atmosphere packages. An increase in sensory shelf-life for oxygen scavenger and ethanol emitter combined packages was also observed [33]. Negamold®, an ethanol vapor sachet was developed by Nippon Kayalan firm (Japan) for meat products. Later, Freund corporation (Japan) combined oxygen absorber with Negamold® and used it for cheese packaging [37]. Ozdemir & Sadikoglu (1998) [38] had also suggested the replacement of ethanol emitters in cheese packages with UV-excimer-laser-treatment of polymer films to generate bactericidal properties. BIOPACK is a polylactic acid-based packaging system consisting of oxygen scavengers and preservatives encapsulated in cyclodextrin with an objective to extend the best before date of cheeses from 2 to 3 months to 9 months with minimum effect on cost of package [39].

4.3 Free radical scavenger or antioxidant incorporated films

Cheeses like Cheddar, Swiss, Blue, Colby etc. are highly prone to lipid oxidation owing to their high fat content. Antioxidants are extensively used to prevent oxidation by scavenging free radical but due to augmented customer trend for additives free food products, incorporation into packaging material is the best option [40]. Antioxidants incorporation into packaging material not only prevents quality deterioration of the product but also stabilizes the polymer [41]. Synthetic antioxidants like butylated hydroxytoluene (BHT) and butylated hydroxy anisole (BHA) are conventionally used in cheese packing. As per Code of Federal Regulation (CFR 21/172.115), the maximum rate of BHT addition to cheese is 200 mg/kg of fat and specific migration limit of BHA is 30 mg/kg of food product as per EU 10/2011 regulations. Asadero cheese was vacuum packed in LDPE co-extruded film containing 8 and 14 mg/g of BHT. Cheese packed in LDPE film incorporated with 8 mg/g of BHT had oxidized flavor while film with 14 mg/g of BHT surpassed the legal limit of BHT addition [42]. Therefore, similar to natural counterparts of other additives the recent focus is on natural antioxidants. Pomegranate peel extract (PPE) incorporated into zein films for packaging of Himalayan Kalari cheese retarded the oxidation of fat and protein due to the presence of polyphenols in PPE [43]. Sliced cheese packed in red algae films incorporated with 1% grape fruit seed extract (GFSE) showed decreased peroxide and thiobarbituric acid value indicating the antioxidant capability of GFSE [44]. Gelatin-chitosan edible film with Boldo herb extract possessed antioxidant and antimicrobial activity and had preservative effect on sliced Prato cheese by preventing psychrotrophs [41]. Similarly, other natural antioxidants like green tea extract [45], catechins [46] and rosemary extract [40] had been explored for their antioxidant potential in cheese packaging but the major challenge with antioxidant incorporated films in cheese packaging is synchronization of antioxidant diffusion rate according to cheese requirement. Also, for natural antioxidant incorporation in continuous film production by extrusion, their stability or thermal degradation is the major concern [46].

4.4 Carbon dioxide absorbers

Cheeses packed with higher CO2 may suffer from sensory related issues as its dissolution leads to formation of carbonic acid [14]. Taleggio cheese produced excessive 2.5 mmol kg-1 day-1 CO2 when stored in nitrogen flushed packages at 6°C causing quality degradation [47]. However, carbon dioxide production is essential in some cheeses to achieve desired texture, eye formation in Emmental and Swiss cheese, and inhibition of microorganisms but excessive production could lead to puffed pouches or package burst [48]. When cheeses are preserved and sold at ambient temperature or when desired shelf life is high, the adverse effects of higher CO2 concentration aggravates many folds [47]. In such circumstances, carbon dioxide absorbers could be used to remove the excess CO2 and create a balanced internal cheese package atmosphere [2]. The only noticeable progress in segment of CO2 absorbers for cheese is by Fellows (2009) [49], who developed a mechanism for CO2 release from mold ripened cheese (e.g. Camembert) package using one-way valve while disallowing other gases to infiltrate. Crump (2012) [50] developed a CO2 absorber pouch using polyethylene that contained 1.1 g of calcium hydroxide (200 mesh) and silica gel each in 2:1 mixture of water for shrink wrapped Swiss cheese (114 g) and reported that the product remained in good color with acceptable taste without any expansion due to CO2 release during storage at 5°C for 4 months. The gas composition and volume of modified atmosphere packed semi-hard cheese (Kadett®, Arla Foods) packages were optimized using mathematical modeling based on gas solubility coefficients, initial carbon dioxide content in cheese and packaging material, thus avoiding consumer rejection due to volume changes [48].

4.5 Light stabilizers

Light, and principally UV light, may cause or accelerate various undesirable reactions like lipid oxidation in cheese. Also, riboflavin, an efficient photosensitizer, present in cheeses at levels of 0.30–0.60 mg/100 g, quickly captivates energy owing to its conjugated double bond and generates either free radicals or reactive oxygen species (ROS). These free radicals and ROS are the major causes of lipid oxidation, off-flavors, color bleaching and nutrient losses especially vitamin A in cheeses [51]. Light stabilizers are divided into five major categories namely: light absorbers, light screeners, excited-state quenchers, peroxide decomposers and free radical scavengers based on their mode of action [52]. Kristoffersen, Stussi, & Gould (1964) [53] reported reduced flavor deterioration in consumer packs of cheddar cheese using Uvinul D 49® as a UV light screening material. Uvinul® S-Pack is a novel FDA approved UV absorber for PET packaging films, which prevented the UV degradation of vitamins and β-carotene, thus highlighting its potential of preventing light degradation changes in cheeses kept in refrigerated illuminated cabinet of supermarkets [54]. Recently, flavonoids had been reported to facilitate the dissipation of photon energy to heat thus deterring photodegradation [22]. Thus, flavonoids incorporated packaging material as natural active element for UV light absorption may be explored for cheese.

4.6 Antimicrobial releasers

Antimicrobial packaging is the most researched forms of cheese active packaging. Antimicrobial agent at certain minimum concentration (known as minimum inhibitory concentration (MIC)) diminishes or impedes microbial growth [9]. Antimicrobial effect in cheeses is most commonly obtained by organic acids and its salt derivatives (sorbic acid, citric acid and their anhydrides), bacteriocins (nisin, lacticin and pediocin), fungicides (imazalil and natamycin), enzymes (lysozyme and lactoferrin), essential oils (basil leaf, thyme, oregano and cinnamon) and miscellaneous compounds like potassium metabisulphite, allyl isothiocyanate, EDTA (ethylenediaminetetraacetic acid) or a combination of these agents [22, 55, 56]. Antimicrobial agents which are sensitive to higher polymer processing temperature are usually applied as coatings. Gliadin based bioplastic films prepared by casting, and containing cinnamaldehyde as active ingredient inhibited fungal growth in cheese spreads [57]. Immobilization of antimicrobial agents like nisin on the surface of cheese packaging material is a convenient technique, however immobilization is appropriate for fluids because of direct contact between antimicrobial surface and entire liquid food [58]. Active polyethylene terephthalate film immobilized with silver nanoparticles extended the shelf-life of white fresh cheese up to 30 days [59]. Labels containing antimicrobial agents can also be used for enhancing cheese shelf life. Labels containing allyl isothiocyanate enhanced the shelf-life of Danish Danbo cheese to 28 weeks when used in combination with MAP as compared to 18 weeks with MAP alone [60].

Chitosan, a natural polysaccharide had been utilized for antimicrobial cheese packaging owing to its biodegradable, antimicrobial, filmogenic and metal complexation attributes [61]. Cellulose polymer based antimicrobial films incorporated with nisin and natamycin showed the potential for preservation of sliced Mozzarella cheese [62]. Electrospinning technique was utilized for incorporation of nisin (at the rate of 5 mg/mL) in polyethylene oxide nanofibers to inhibit Listeria monocytogens contamination in cheddar cheeses without affecting its sensory attributes [63]. A novel antimicrobial film based on hybrid organic–inorganic material commonly called as “anionic clays”, consisting of layered double hydroxide intercalated with salicylate and carbonate anions increased the storage life of Mozzarella to three weeks at a storage temperature of 18°C [64]. DSM™ has developed Pack-Age® as a solution for ripening of cheese in a vapor pervious foil united with yeast and mold blockers [65].

4.7 Color and flavor releasers

Flavor emitters are mainly used to impart flavor to any packed product or scalp/downgrade any undesirable flavor due to harsher processing conditions, thereby improving sensorial attributes and chances of modifying product formulation [66]. It may be used for masking off-flavors but food processors may unfairly market their expired, unsafe or low-quality foods without letting the consumers know. ScentSational Technologies® is global leader in developing food packages with controlled release of legally permitted flavor into headspace of a pack at varying intervals and provision for adjustment of flavor intensity [31]. Recently, they have also ventured into developing customized and patented injection molded scented and/or flavored parts of any pack. Kraft foods had developed a system for controlled and prolonged release of volatile flavor upon opening and reopening of the package [67]. Such type of packaging innovation could also be used for cheese products like chiplets, slices, processed cheese etc. which are usually contained in multi-use packages.

Color releasing multilayered film is the novel technique for incorporating permitted food grade colors (Table 2) such as annatto over cheese surface. Such films generally find their application when low intensity shade of color is desired or color is adversely affected during any processing step, storage or distribution. Mohan, Ravishankar, & Gopal, (2010) [4] suggested the migration of edible food permitted red color from the wrapper of surimi to provide it a more desirable and acceptable color. Similarly, α, β-citral migrated from the cellulose acetate films and improved the yellowness of Coalho cheese without affecting its texture during 25 days of storage [68].

4.8 Miscellaneous active packaging systems for cheese

4.8.1 Self-cleaning rinds

Rindless cheeses are cooked or uncooked hard varieties of cheese that are ripened in plastic film which allows little or no gas or moisture movement e.g. Cheddar, Edam, Gouda and Swiss. Natural rind is the outer crust of cheese formed either during cheese making or storage under controlled humidity and temperature [3]. These rinds are highly susceptible to undesirable fungal growth and becomes slimy at times. Gerber, Koehler, Grass, & Stark (2012) [69] developed a three layered, self-cleaning and porous rind inoculated with Penicillium roqueforti. The base layer consisted of polyvinyl chloride (90 μm), living layer of agar (300 μm) with inoculum and porous cover layer of polycarbonate (10 μm) for diffusion of gases and nutrient supply. There is immense future potential for the development of antibacterial self-cleaning rinds using penicillin producing molds (Penicillium jensenii) for cheese varieties [69].

4.8.2 Microwave assisting films

Microwave susceptors are the substances which absorb microwave energy and convert it into heat energy. It consists of Al foil layer deposited on paperboard or polyester film for uniform heating treatment [18]. Emmi®, a USA based cheese manufacturing firm, provides different variants of fondue recipes (melted Swiss cheese) in microwaveable containers which are ready-to-(h)eat, convenient and recyclable [70]. These types of microwave assisted heating packs could be used for melted cheese recipes. The major concern with microwave assisted heating cheese containers is duration of microwave heating. Some pop-up sound mechanism could be attached with package which blows up and makes a noise on complete even heating of the package content [3].

4.8.3 Pesticide control agents

Pesticide control agents are generally used with secondary packaging systems to prevent insects, or for fungicidal control, during import and export of food products over distant horizons. Packaging material with pesticide control could also be used to prevent detrimental effects of pests and insects for cheeses like Cheddar, Parmesan etc. which require longer ripening period. The major concerns with these types of pesticide control agents containing packaging is their permissible limit and regulatory issues for use with cheeses. Natamycin is a GRAS status (as per FDA) fungicide which is produced during fermentation by Streptomyces natalensis. Romero et al. (2016) [71] showed positive effect of natamycin incorporated biodegradable triticale flour films on mold inhibition when used for wrapping soft cheese.


5. Intelligent packaging of cheese: concepts and applications

Intelligent packaging has not been researched extensively for cheese as reflected by very few publications in Figure 1. A few intelligent packaging systems investigated for cheese are presented in this section. However, large size of cheese market including import and export offers attractive opportunities. A list of different suppliers of commercially available smart packaging materials along with their head office, website and contact point are detailed in Table 4.

Type of smart packagingCompany (Head Office)Brand nameWebsiteDistributor/Contact point in Asia
Oxygen scavengerClariant® Chemicals (Switzerland)OXY-GUARD™, O-Buster®www.clariant.comClariant Chemical, Vadodara
Mitsubishi Gas Chemical (Japan) & Advanced Materials Company, Oxygen Absorbers Division, Japan
Toppan Printing (Japan)Freshilizerwww.toppan.comMax Speciality Films Limited, Punjab, India
Multisorb Filtration Group® (New York, USA)StabilOx®,
Southcorp Packaging (Acquired by Visy®) (Australia) facility in India. Available in Thailand.
AGM Containers (USA)ActiSorb®OClariant India, Maharashtra India
Time temperature indicatorAvery Dennison (California, USA)TT Sensor™www.averydennison.comBangalore, Karnataka
IntroTech (Netherlands)Monitor Mark®
Vitsab® (Limhamn, Sweden)CheckPoint®
TempTime® Corporation (USA)Fresh-Check®www.temptimecorp.comLisaline Lifescience Technologies Pvt. Ltd., Thane, India
Antimicrobial packagingLife Materials Technology Limited (Hong Kong)Agion®
Addmaster Limited (UK)Biomaster® & Jessen, Indonesia (Contact point in Asia)
VGP (Barcelona, Spain)
Ethylene scavengerEvert-Fresh Corporation (USA)
Sekisui Jushi (Japan)
Peakfresh Products Ltd. (Australia)
Moisture absorbersSealed Air® Corporation (USA)Dri-Loc®
SEALPAC® (Germany)Tenderpac®www.sealpacinternational.comSynerchem Sdn. Bhd., Selangor, Malaysia (Contact point in Asia)
Integrity IndicatorFreshpoint Lab (Australia)O2
Timestrip Ltd.Timestrip
Mitsubishi Gas Chemical (Japan)Ageless & Advanced Materials Company, Oxygen Absorbers Division, Japan
Insignia Technologies Ltd. (Scotland)
RFIDTemptrip LLC (USA)
Mondi Plc (Austria)Intelligent
Freshness IndicatorCOX Technologies (USA)Fresh
Timestrip (UK)Timestrip®
Ripesense Ltd. (New Zealand)ripeSense®
Microwave susceptorsSirane Food Packaging Limited (UK)Sira-Crisp™www.sirane.comSirane East, Vostok, Russia
VacPac Inc. (USA)

Table 4.

Suppliers and Asian contact point of commercially available smart packaging systems.

Source: compiled from internet using website of the companies.

5.1 Gas indicators

Gas indicators or package integrity or leak indicators generally indicate the presence or absence of any gas (majorly oxygen) on the basis of certain chemical or enzymatic reactions. Cheeses are packed under modified atmospheres usually devoid of oxygen to enhance their shelf life. However, the gas composition of cheese package may change relying on the microbial growth inside the package, barrier properties of the packaging material, efficiency of packaging system, or physical damage, if any, that causes leakage [72]. So, knowing the level of oxygen is important to ensure cheese quality and safety in the entire supply chain and throughout its shelf-life. Redox dye-based oxygen indicators have been reported to indicate the package integrity and status of MAP in food non-destructively [73]. A schematic illustration of Mozzarella cheese package equipped with an oxygen indicator and oxygen scavenger with dye-based oxygen sensor is presented in Figures 3 and 4, respectively.

Figure 3.

A schematic illustration of intelligent packaging system using an oxygen indicator applied to mozzarella cheese package (Source: [15]).

Figure 4.

A schematic illustration of smart (active + intelligent) packaging system for mozzarella cheese package with oxygen indicator (shown in pink color) and oxygen scavenger (O-buster® oxygen scavenger) (Source: [15]).

A single use fluorescent-based oxygen sensor prepared using platinum octaethylporphyrin-ketone (PtOEPK), a phosphorescent oxygen-sensitive dye, sensed oxygen concentration changes in MAP cheddar cheese over a period of 4 months. The sensor was reported to possess sensitivity in the range between 0.02% and 100% oxygen. Correlation between oxygen concentration and microbial growth presented an opportunity for assessment of cheese quality using colorimetric oxygen sensor [74]. Similarly, dye based ultraviolet light activated oxygen sensor was successfully developed and characterized for its oxygen sensitivity, oxygen dependent color change and mechanical properties by Deshwal et al. (2018) [75]. The developed indicator was integrated with MAP Mozzarella cheese as an integrity/oxygen indicator, which could be helpful for stakeholders in the entire supply chain [15]. Hempel, Gillanders, Papkovsky, & Kerry, (2012) [76] successfully exploited optical oxygen sensors for detecting integrity (ingress of oxygen) of vacuum packaged cheddar cheese samples during its storage.

5.2 Freshness indicators

Freshness indicators, mostly colorimetric in nature, determine the safety, quality or freshness of product based on microbial growth or chemical change. They trigger a visual indication mechanism by detecting the metabolites of microbial or chemical change [77]. Possibilities of freshness detection of packaged milk, cream and cottage cheese using polymer-based labels was proposed by Chen & Zall (1987) [78]. Major approach for characterizing the deterioration of any cheese is by identifying the volatile organic compounds liberated during its storage (or ripening) using solid phase microextraction-gas chromatography/mass spectroscopy (SPME-GC–MS). Octane, hexanal and 2-pentyl-furan were the indicators for light exposure as obtained during the volatile profile of processed cheese [79]. Fourier Transform Infrared Spectroscopy (FTIR) and near infrared spectroscopy (NIR) have also been used to rapidly identify the chemical groups involved in the Crescenza cheese spoilage for possible development of freshness indicator [80]. Most recently, a biodegradable chitosan film containing pomegranate peels/Melissa officinalis essential oil demonstrated not only antimicrobial potential but also anthocyanins functionality as a spoilage indicator changing its color from blue to red due to pH change of cream cheese during spoilage [77]. A diverse blue cheese classification or identification indicator based on chromogenic array pattern of several pH dyes differentiated five cheeses i.e. Roquefort, Blue Stilton, blue cheese with leaves, blue cheese spread and Cheddar with 100% accuracy [81]. Such type of indicators can be used as freshness indicators of blue cheese where the changes in pH and color could be correlated with cheese spoilage. An attempt for the development of red cabbage extract-based pH indicator for monitoring Ricotta cheese spoilage was reported by Bento, Pereira, Chaves, & Stefani, (2015) [82]. Biogenic amines like histamine, tyramine, tryptamine and phenylethylamine are produced in cheese during ripening. Several reports of histamine poisoning in the past for Gouda, Swiss, Cheddar, Cheshire etc. cheeses indicate the potential of biogenic amines as freshness or spoilage indicators for cheese [83]. Freshness indicators for poultry, fish and seafood are commercially available, but a very few “biological use by date” or “chemical best before date” indicators for dairy products had been reported to the best of our knowledge indicating research possibilities in this area.

5.3 Ripening indicators

Cheese ripening indicator could be defined as the use of any technique/process/sensor for spotting metabolites (majorly volatiles) or chemical breakdown by-products of glycolysis, proteolysis and lipolysis to quantify the maturity or age of any cheese variety. The earliest attempt in cheese segment included the use of amido black dye for detecting the age of Cheddar and lactose-hydrolyzed cheddar cheese. Dye binding values were correlated with the free amino acid content [84]. Electric nose (or e-nose) had been used for headspace fingerprinting of packaged ripened cheese (Crescenza) volatiles and the data obtained was found to be helpful for its shelf-life measurement [85]. Tavaria, Ferreira, & Malcata, (2004) [86] quantified major ripening descriptors like free fatty acids, acetic, isobutyric and isovaleric acid concentration during 180 days ripening period of Serra da Estrela cheese. These volatile fatty acids furnished information about the optimal consumption time of cheese which could also be successfully used as ripening indicator. Industrially successful models based on infrared reflectance spectra, attributed to the changes in absorbance patterns of alcohol and amide groups have been used to predict the ripening stages and sensory characteristics of Cheddar [87] and Camembert cheese [88] with a minute error of one day.

5.4 Time temperature indicators (TTIs)

The shelf-life of any food commodity as mentioned on the package in terms of “biological use by date” or “chemical best before date” is subject to its temperature exposure history owing to temperature dependence of microbial growth, enzyme activity and chemical reactions. Time temperature indicators (TTIs) convey information about the temperature exposure of the food commodity over a period of time [89]. TTIs mainly finds their applications in temperature sensitive food products that are stored or distributed in chilled conditions like milk, cheese, ice-cream, yoghurt, meat, fish etc. Shellhammer & Singh (1991) [90] used enzyme-based full history TTI (I-POINT®) on cottage cheese to correlate temperature variation with cheese quality parameters and reported that the TTIs response was significantly affected by pH, titratable acidity and standard plate count of cheese samples. However, attempts of TTI usage in cheese are few and include shelf-life evaluation of Taleggio cheese [91] and Caprino type cheese [92] using TTIs. Potential of diacetylenic monomers as active ingredient in TTIs based on polymerization reaction for monitoring cheese maturity had also been suggested [93]. A study on evolution of proteolytic activity products in Azeitao cheese with fluctuating temperature revealed prominent presence of two free amino acids (valine and leucine) and two biogenic amines (tyramine and putrescine), which may serve as temperature change indicators for the development of microbial TTI for ripened cheese [94].

5.5 Radio frequency identification devices (RFID)

Cheese traceability at batch level is maintained using self-adhesive casein labels, written records, and in advanced cases information is stored in a local database. However, such systems are inefficient considering food safety, counterfeiting risks, voluminous cheese production, warehouse optimization and cost involved in production [95]. So, application of RFID tags at ‘farm to fork’ levels of cheese industry could provide reliable solutions as it stores more information and assess at longer distances [12]. Regattieri, Gamberi, & Manzini (2007) [96] developed a RFID based traceability systems for hard cheese (Parmigiano Reggiano) which detects the history of the product over entire supply chain. Every minute information starting from feed input, production details to detailed pedigree of a cheese piece is available, thus even facilitating consumers to authorize cheese origin and prevent cheese imitation. The final cost of such RFID tags on customer was calculated to be 0.5%. Similarly, improved traceability of long-ripened cheeses (Bra Tenero, Bra Duro, Raschera and Toma Piemontese) with automatic movement recording during production, handling in ripening room and warehouse, delivery, packing and selling was achieved using tags operating at low (125 kHz), high (13.56 MHz) and ultra-high (865 MHz) frequency [12]. RFID tags with an ability to store data related to 200 variables of cheese production not only improved the quality and yield control of the production plant but also possessed robustness against different temperature, humidity, acid and frictional forces [97]. Papetti et al. (2012) [98] designed a web based “infotracing system” for Italian cheese (Caciottina massaggiata di Amaseno) using RFID tags. On linking maturity level of cheeses with quality information (chemical, sensory and spectrophotometric data), RFID system was found to be reliable and compatible with production process. An additional application is “Smart Shelf” which consists of network of RFID antennae for identifying a product’s location. It had been successfully validated for tracking expiry dates of processed cheese [99].

5.6 Physical shock indicators

Physical shock indicators are of prime importance for status quo of any fragile product during its rough handling or carriage. Cheeses are often exported across the globe with highest probability of mishandling by personnel during any step of distribution channels or improper selection of transportation channel. Physical shock indicators could be developed using diffusion mechanism, where a fluid leaks and collects irreversibly in another impermeable package, thus indicating the force or pressure to which package content had been exposed. To the best of our knowledge and literature mining no physical shock indicator for cheese and food packaging had been reported. Convex-concave type of metallic structure could also be used to identify the forces to which any cheese packages are exposed over long distances.


6. Development trends and research directions for smart packaging of cheese

6.1 Active packaging systems

Packaging could also be used for facilitating the reduction of cholesterol and lactose in cheeses using cholesterol reductase and lactase enzymes. Cholesterol reductase enzyme converts cholesterol to undigested form (coprosterol), reducing its absorption in intestine. An innovative ethylene-vinyl alcohol copolymer (EVOH) plastic encompassing 30% beta-cyclodextrins reduced the cholesterol concentration by 23% in UHT milk [100]. Such type of active plastic films could be incorporated with β-galactosidase enzyme (lactase) and explored for the development of lactose free whey cheeses due to increased incidences of lactose intolerance across the globe [101].

Citric acid, ferrous salt/ascorbic acid, cellulose triacetate and activated carbon/clays/zeolites are most commonly used off-odor absorbers finding their use in fish, cereals, fruits and poultry products [3]. Off-flavor and odor scavengers prevent cross contamination of pungent odor and aids in improving the overall acceptance of cheeses. However, it is imperative that the constituents scavenged should not be spoilage indicators or essential for flavor development. Some ketones, aldehydes and esters are associated with fruity flavor of cheeses which may be undesirable for some customers [102]. Aldehyde and ester scavengers in cheese packaging can be helpful in improving its sensorial quality. The identified volatile compounds from the headspace of cheese packages revealed the possibilities for development of absorption system and stabilization of sensory qualities of semi-soft ripened cheese [103].

The earliest documented and patented step to achieve the tack ability of a multilayered polyester film over cheese surface was the electrical discharge or flame treatment of the inner surface [104]. Such films were temporarily adherent and easily peel able while opening cheese package. Presently, these anti-stick films can find their vast application for packaging individual slices of processed cheese or Mozzarella cheese spheres thus, reducing sticking losses.

Carbon dioxide and ethanol not only inhibit bacteria, yeasts, molds but also reduces oxidation and could be used individually or in combination for cheese packaging systems to inhibit microbial growth and pack shrinkage [105]. Cheese is most commonly packed with higher CO2 concentration using MAP technique but CO2 dissolves in the product leading to package collapse [6]. Package collapse could be overcome by inserting CO2 emitters in standard MAP cheese trays with perforated false bottom. The controlled release of ethanol in cheese packs could be obtained by encapsulating in a carrier material [65]. Ethicap®, a commercialized ethanol emitter absorbed in silica pads and embedded in sachets made from ethylene vinyl acetate copolymer prevented the growth of molds and yeast, thereby enhancing the shelf-life of soft cheeses [106]. However, objectionable off-flavors involved with higher concentration of CO2 and ethanol are concerning and supplementary flavor mixtures may be required.

An innovative single use package having the ability to absorb oxygen, carbon dioxide and water vapor, comprising of calcium hydroxide which emits water due to CO2 absorption, thus activating transition metal (iron oxide) based oxygen scavenger has been developed. Such containers would be suitable for hard cheeses like Taleggio, which emits large amount of CO2 during ripening and require slight oxygen for maintaining the growth of live cultures [107].

Self-cooling packaging technique is based on an endothermic chemical reaction involving the dissolution of ammonium chloride or ammonium nitrate in water and heat pump technology using water as the heat transmission medium. Such type of packaging systems may remunerate the cold chain conditions, especially where supply channel is inefficient [3]. Initially, thermal sensitive cheese varieties may be shipped using secondary or tertiary thermal management system. Greenbox Thermal Management Systems™ utilizes organic phase change nanomaterial labeled as PureTemp®, to provide specifically designed distribution carriage systems with an ability to maintain temperature precisely for longer durations of supply [108]. It consists of a reusable, recyclable and completely biodegradable boxes in box arrangement with exterior layer of corrugated plastic. Such type of self-cooling containers may be really helpful for exporting cheeses over longer distances without any thermal abuse and quality deterioration.

6.2 Intelligent packaging systems

Emmental and Gouda cheese possess typical and desired regular round holes (eyes) owing to the production of large amount of carbon dioxide during lactate metabolism [109]. Dye based CO2 indicators based on color intensity that is correlated with amount of CO2 released could be used to monitor advances in ripening and signpost the accomplishment of optimal ripening. Recently, a novel consumable adhesive CO2 indicator strip consisting of phenol red dye and tetrabutylammonium hydroxide coated onto silica nanoparticles was developed by Wang, Yusufu, & Mills, (2019) [110]. The color response was dependent on temperature and thickness of polymer barrier films. Such type of indicators could be explored for the development of CO2 indicator or freshness indicator for modified atmosphere packaged cheese and cheese-based products.

Temperature sensitive networks based on chitosan-poly-(N-isopropylacrylamide) for controlled release were developed by Alvarez-Lorenzo et al. (2005) [111], which can be used in active cheese packaging materials for precise emission of any active component. Films changing their gas permeability in response to degree of temperature and exposure duration may be frequently used during storage and distribution of respiring cheeses like Camembert and Gouda. BreatheWay® membrane technology (Apio Inc., California), based on side chain crystallizable (SCC) polymers provides the solution for gas permeability control according to change in temperature. The change in polymer properties like chain length and side chains can be used for attaining required oxygen and carbon dioxide permeabilities in cheese packages [3].


7. Conclusion

With the focal point being shifted to consumer convenience, quality and safety, active and intelligent packaging tools may help customers with informed choice. As the world is witnessing increased consumption of cheese, these packaging tools have potential market growth. The expansion of smart packaging technologies in cheese industry remains at a nascent stage. Recent research publications on smart packaging of meat, fish, fruits and vegetables suggest innovative ideas which could be conceptualized for cheese in near future. Smart packaging tools need to be of low cost and multiple benefits. The partnership of active and intelligent packaging can be used to complement each other’s actions. Existing challenges could be overcome by multidisciplinary approaches for the development of smaller, more powerful and cost-effective smart packaging systems. Biotechnology, nanotechnology, food science, sensor technology and information technology could be combined for overcoming the shortcomings. Biosensor and hybrid devices for cheese packaging remains untouched in terms of its development and commercialization. It could be expected that with the continuous advances in intelligent packaging and growing modified atmosphere packaged dairy products market, the demand for such type of intelligent packaging systems is expected to rise.



We are highly thankful to Director, ICAR-National Dairy Research Institute, Karnal for providing the required facilities to carry out the present work.


Conflict of interest

The authors declare no conflict of interest that might be perceived as affecting the neutrality of the article.


  1. 1. Mihindukulasuriya SDF, Lim LT. Nanotechnology development in food packaging: A review. Trends in Food Science & Technology. 2014;40:149-167
  2. 2. Lee SJ, Rahman AM. Intelligent packaging for food products. In: Innovations in Food Packaging. Academic Press. 2014; p. 171-209
  3. 3. Robertson GL. Food Packaging: Principles and Practice. 3rd ed. CRC Press, Boca Raton, USA. 2013
  4. 4. Mohan CO, Ravishankar CN, Gopal TS. Active packaging of fishery products: a review. Fishery Technology. 2010;47:1-18
  5. 5. Mordor Intelligence [Internet]. 2020. Active and intelligent packaging market- Growth, Trends and Forecast (2020-2025). Available from: [Accessed: 2020-03-31]
  6. 6. O’Callaghan KA, Kerry JP. Consumer attitudes towards the application of smart packaging technologies to cheese products. Food Packaging and Shelf Life. 2016;9: 1-9
  7. 7. FAOSTAT-Food and Agricultural Organization of the United Nations Statistics Division. [Internet] (2019). Available from: [Accessed: 2020-05-10]
  8. 8. IDF. Bulletin of the International Dairy Federation 501/2019. The World Dairy Situation. 2019
  9. 9. Hanusova K, Stastna M, Votavova L, Klaudisova K, Dobias J, Voldrich M, Marek M. Polymer films releasing nisin and/or natamycin from polyvinyldichloride lacquer coating: nisin and natamycin migration, efficiency in cheese packaging. Journal of Food Engineering. 2010;99:491-496
  10. 10. Jayadevan GR. A strategic analysis of cheese and cheese products market in India. Indian Journal of Dairy Research. 2013;2:247-250
  11. 11. Schneider Y, Kluge C, Weiss U, Rohm H. Packaging Materials and Equipment. In Law BA, Tamime AY, editors. Technology of cheesemaking. 2nd ed. Blackwell Publishing House, Malden, USA. 2010. p. 413-439
  12. 12. Barge P, Gay P, Merlino V, Tortia C. Item-level radio-frequency identification for the traceability of food products: application on a dairy product. Journal of Food Engineering. 2014;125:119-130
  13. 13. Sinigaglia M, Bevilacqua A, Corbo MR, Pati S, Del Nobile MA. Use of active compounds for prolonging the shelf life of mozzarella cheese. International Dairy Journal. 2008;18:624-630
  14. 14. Pocas MdeF, Pintado M. Packaging and the shelf life of cheese. In: Robertson GL (Ed) Food Packaging and Shelf life. A Practical Guide. CRC Press, Boca Raton, Florida, USA. 2010; p. 103-125
  15. 15. Deshwal GK. Development and evaluation of intelligent oxygen sensor applied to modified atmosphere packaged Mozzarella cheese. M.Tech Dissertation, ICAR-National Dairy Research Institute; 2017
  16. 16. Rodriguez-Aguilera R, Oliveira JC, Montanez JC, Mahajan PV. Effect of modified atmosphere packaging on quality factors and shelf-life of surface mold ripened cheese: Part I constant temperature. LWT-Food Science and Technology. 2011;44:330-336
  17. 17. Kapoor R, Metzger LE. Process cheese: Scientific and technological aspects—A review. Comprehensive Reviews in Food Science and Food Safety. 2008;7:194-214
  18. 18. Realini CE, Marcos B. Active and intelligent packaging systems for a modern society. Meat Science. 2014;98:404-419
  19. 19. Conceicao Goncalves MPJ, Dos Santos Pires AC, Soares NDFF, Araujo EA. Use of allyl isothiocyanate sachet to preserve cottage cheese. Journal of Foodservice. 2009;20:275-279
  20. 20. Unalan IU, Arcan I, Korel F, Yemenicioglu A. Application of active zein-based films with controlled release properties to control Listeria monocytogenes growth and lipid oxidation in fresh Kashar cheese. Innovative Food Science & Emerging Technologies. 2013;20:208-214
  21. 21. Faccia M, Gambacorta G, Natrella G, Caponio F. Shelf life extension of Italian mozzarella by use of calcium lactate buffered brine. Food Control. 2019;100:287-291
  22. 22. Huvaere K, Skibsted LH Flavonoids protecting food and beverages against light. Journal of the Science of Food and Agriculture. 2015;95:20-35
  23. 23. Otero V, Becerril R, Santos JA, Rodriguez-Calleja JM, Nerin C, Garcia-Lopez ML. Evaluation of two antimicrobial packaging films against Escherichia coli O157: H7 strains in vitro and during storage of a Spanish ripened sheep cheese (Zamorano). Food Control. 2014;42:296-302
  24. 24. Ramos OL, Pereira JO, Silva SI, Fernandes JC, Franco MI, Lopes-da-Silva JA, Malcata FX. Evaluation of antimicrobial edible coatings from a whey protein isolate base to improve the shelf life of cheese. Journal of Dairy Science. 2012;95:6282-6292
  25. 25. Lillevang SK, Mortensen G, Kristensen MN, Pedersen HS, Friis TL, Sorensen NK. Microbial oxygen absorber. U.S. Patent Application No. 14/307,979. U.S. Patent and Trademark Office. Washington, DC. 2014
  26. 26. Lillevang S, Mortensen G, Kristensen M, Pedersen H, Friis T, Sorensen N. Microbial oxygen absorber. U.S. Patent Application No. 11/602,328. U.S. Patent and Trademark Office. Washington, DC. 2007
  27. 27. Pantaleao I, Pintado MME, Pocas MFF. Evaluation of two packaging systems for regional cheese. Food Chemistry. 2007;102:481-487
  28. 28. Desobry S, Hardy J. Camembert cheese water loss through absorbent packaging. Journal of Food Science. 1994;59:986-989
  29. 29. Swartz WE, Hartford CG. Method for preventing spoilage, rancidity, and off-color by using a tricalcium phosphate ultraviolet light inhibitor. U.S. Patent No. 5,948,458. Washington, DC: U.S. Patent and Trademark Office. 1999
  30. 30. Marbler CA, Parmentier R. Packaging material. U.S. Patent No. 5,958,534. U.S. Patent and Trademark Office. Washington, DC. 1999
  31. 31. Biji KB, Ravishankar CN, Mohan CO, Gopal TS. Smart packaging systems for food applications: a review. Journal of Food Science and Technology. 2015;52:6125-6135
  32. 32. Brown SR, Forauer EC, D'Amico DJ. Effect of modified atmosphere packaging on the growth of spoilage microorganisms and Listeria monocytogenes on fresh cheese. Journal of Dairy Science. 2018;101:7768-7779
  33. 33. Mexis SF, Chouliara E, Kontominas MG. Quality evaluation of grated Graviera cheese stored at 4 and 12 C using active and modified atmosphere packaging. Packaging Technology and Science. 2011;24:15-29
  34. 34. Panfil-Kuncewicz H, Lis A, Majewska M. The use of oxygen absorbers for packaging ripened cheese. Polish Journal of Natural Sciences. 2015;30:285-295
  35. 35. Sanguinetti AM, Secchi N, Del Caro A, Stara G, Roggio T, Piga A. Effectiveness of active and modified atmosphere packaging on shelf life extension of a cheese tart. International Journal of Food Science & Technology. 2009;44:1192-1198
  36. 36. Arena F, Dainelli D, McAlister Jr LB. Oxygen scavenging films. U.S. Patent Application No. 15/574,635. U.S. Patent and Trademark Office. Washington, DC. 2018
  37. 37. Veronique COMA. Bioactive packaging technologies for extended shelf life of meat-based products. Meat science. 2008;78:90-103
  38. 38. Ozdemir M, Sadikoglu H. A new and emerging technology: Laser-induced surface modification of polymers. Trends in Food Science & Technology. 1998;9:159-167
  39. 39. CORDIS-Community Research and Development Information Service. [Internet] (2005) Biopack: Proactive biobased cheese packaging. Available from: [Accessed: 2020-08-15]
  40. 40. Hala MF, Ebtisam ED, Sanaa I, Badran MA, Marwa AS, Said ME. Manufacture of low fat UF-soft cheese supplemented with rosemary extract (as natural antioxidant). Journal of American Science. 2010;6:570-579
  41. 41. Bonilla J, Sobral PJ. Gelatin-chitosan edible film activated with Boldo extract for improving microbiological and antioxidant stability of sliced Prato cheese. International Journal of Food Science & Technology. 2019;54:1617-1624
  42. 42. Soto-Cantu CD, Graciano-Verdugo AZ, Peralta E, Islas-Rubio AR, Gonzalez-Cordova, A, Gonzalez-Leon A, Soto-Valdez H. Release of butylated hydroxytoluene from an active film packaging to asadero cheese and its effect on oxidation and odor stability. Journal of Dairy Science. 2008;91:11-19
  43. 43. Mushtaq M, Gani A, Gani A, Punoo HA, Masoodi FA. Use of pomegranate peel extract incorporated zein film with improved properties for prolonged shelf life of fresh Himalayan cheese (Kalari/kradi). Innovative Food Science & Emerging Technologies. 2018;48:25-32
  44. 44. Shin YJ, Song HY, Seo YB, Song KB. Preparation of red algae film containing grapefruit seed extract and application for the packaging of cheese and bacon. Food Science and Biotechnology. 2012;21:225-231
  45. 45. Huvaere K, Nielsen JH, Bakman M, Hammershoj M, Skibsted LH, Sorensen J, Dalsgaard TK. Antioxidant properties of green tea extract protect reduced fat soft cheese against oxidation induced by light exposure. Journal of Agricultural and Food chemistry. 2011;59:8718-8723
  46. 46. Rashidinejad A, Birch EJ, Sun-Waterhouse D, Everett DW. Effects of catechin on the phenolic content and antioxidant properties of low-fat cheese. International Journal of Food Science & Technology. 2013;48:2448-2455
  47. 47. Lee DS. Carbon dioxide absorbers for food packaging applications. Trends in Food Science & Technology. 2016;57:146-155
  48. 48. Jakobsen M, Risbo J. Carbon dioxide equilibrium between product and gas phase of modified atmosphere packaging systems: Exemplified by semihard cheese. Journal of Food Engineering. 2009;92:285-290
  49. 49. Fellows PJ. Food Processing Technology: Principles and Practice. (3rd ed.). Woodhead Publishing Ltd. Cambridge. 2009
  50. 50. Crump J. Method of rapid carbon dioxide absorption. U.S. Patent Application No. 13/480,222. U.S. Patent and Trademark Office. Washington, DC. 2012
  51. 51. Mortensen G, Bertelsen G, Mortensen BK, Stapelfeldt H. Light-induced changes in packaged cheeses-a review. International Dairy Journal. 2004;14:85-102
  52. 52. Yousif E, Haddad R. Photodegradation and photostabilization of polymers, especially polystyrene. SpringerPlus, 2013;2:398
  53. 53. Kristoffersen T, Stussi DB, Gould IA. Consumer-Packaged Cheese. I. Flavor Stability1. Journal of Dairy Science. 1964;47:496-501
  54. 54. Coughlin G, Schambony S. New UV absorber for PET packaging: better protection with less discoloration. Journal of Plastic Film & Sheeting. 2008;24:227-238
  55. 55. Var I, Erginkaya Z, Guven M, Kabak B. Effects of antifungal agent and packaging material on microflora of Kashar cheese during storage period. Food Control. 2006;17:132-136
  56. 56. Govaris A, Botsoglou E, Sergelidis D, Chatzopoulou PS. Antibacterial activity of oregano and thyme essential oils against Listeria monocytogenes and Escherichia coli O157: H7 in feta cheese packaged under modified atmosphere. LWT-Food Science and Technology. 2011;44:1240-1244
  57. 57. Balaguer MP, Lopez-Carballo G, Catala R, Gavara R, Hernandez-Munoz P. Antifungal properties of gliadin films incorporating cinnamaldehyde and application in active food packaging of bread and cheese spread foodstuffs. International Journal of Food Microbiology. 2013;166:369-377
  58. 58. Han JH. Antimicrobial food packaging. In: Ahvenainen, R. (Ed.), Novel Food Packaging Techniques. CRC Press, Boca Raton, Florida, USA. 2003; p. 50-70
  59. 59. Singh A, Khamrai M, Samanta S, Kumari K, Kundu PP. Microbial, Physicochemical, and Sensory Analyses-Based Shelf Life Appraisal of White Fresh Cheese Packaged into PET Waste-Based Active Packaging Film. Journal of Packaging Technology and Research. 2018;1-23
  60. 60. Winther M, Nielsen PV. Active packaging of cheese with allyl isothiocyanate, an alternative to modified atmosphere packaging. Journal of Food Protection. 2006;69:2430-2435
  61. 61. Moreira MDR, Pereda M, Marcovich NE, Roura SI. Antimicrobial effectiveness of bioactive packaging materials from edible chitosan and casein polymers: assessment on carrot, cheese, and salami. Journal of Food Science. 2011;76:M54-M63
  62. 62. Dos Santos Pires AC, de Fatima Ferreira Soares N, de Andrade NJ, da Silva LHM, Camilloto GP, Bernardes PC. Development and evaluation of active packaging for sliced mozzarella preservation. Packaging Technology and Science: An International Journal. 2008;21:375-383
  63. 63. Cui H, Wu J, Li C, Lin L. Improving anti-listeria activity of cheese packaging via nanofiber containing nisin-loaded nanoparticles. LWT-Food Science and Technology. 2017;81:233-242
  64. 64. Gorrasi G, Bugatti V, Tammaro L, Vertuccio L, Vigliotta G, Vittoria V. Active coating for storage of Mozzarella cheese packaged under thermal abuse. Food Control. 2016;64:10-16
  65. 65. DSM [Internet] (2020). Available from: [Accessed: 2020-06-18]
  66. 66. Lopez-Rubio A, Almenar E, Hernandez-Munoz P, Lagaron JM, Catala R, Gavara R. Overview of active polymer-based packaging technologies for food applications. Food Reviews International. 2004;20:357-387
  67. 67. Koontz JL. Special delivery: Controlled release of active ingredients from food and beverage packaging. Italian Packaging Technology Award (IPTA) Paper Competition. Department of Food Science and Technology, Virginia. 2006
  68. 68. Oliveira MA, Bastos MS, Magalhaes HC, Garruti DS, Benevides SD, Furtado RF, Egito AS. α, β-citral from Cymbopogon citratus on cellulosic film: Release potential and quality of coalho cheese. LWT-Food Science and Technology. 2017;85:246-251
  69. 69. Gerber LC, Koehler FM, Grass RN, Stark WJ. Incorporating microorganisms into polymer layers provides bioinspired functional living materials. Proceedings of the National Academy of Sciences. 2012;109:90-94
  70. 70. Emmi [Internet] (2020). Available from: [Accessed: 2020-08-15]
  71. 71. Romero V, Borneo R, Passalacqua N, Aguirre A. Biodegradable films obtained from triticale (X Triticosecale Wittmack) flour activated with natamycin for cheese packaging. Food Packaging and Shelf Life. 2016;10:54-59
  72. 72. Mills A. Oxygen indicators and intelligent inks for packaging food. Chemical Society Reviews. 2005;34:1003-1011
  73. 73. Mills A, Hazafy D. Nanocrystalline SnO2-based, UVB-activated, colorimetric oxygen indicator. Sensors and Actuators B: Chemical. 2009;136:344-349
  74. 74. O’Mahony FC, O’Riordan TC, Papkovskaia N, Kerry JP, Papkovsky DB. Non-destructive assessment of oxygen levels in industrial modified atmosphere packaged cheddar cheese. Food Control. 2006;17:286-292
  75. 75. Deshwal GK, Panjagari NR, Badola R, Singh AK, Minz PS, Ganguly S, Alam T. Characterization of biopolymer-based uv-activated intelligent oxygen indicator for food-packaging applications. Journal of Packaging Technology and Research. 2018;2:29-43
  76. 76. Hempel AW, Gillanders RN, Papkovsky DB, Kerry JP. Detection of cheese packaging containment failures using reversible optical oxygen sensors. International Journal of Dairy Technology. 2012;65:456-460
  77. 77. Pirsa S, Karimi Sani I, Pirouzifard MK, Erfani A. Smart film based on chitosan/Melissa officinalis essences/pomegranate peel extract to detect cream cheeses spoilage. Food Additives & Contaminants: Part A. 2020;37:634-648
  78. 78. Chen JH, Zall RR. Packaged milk, cream and cottage cheese can be monitored for freshness using polymer indicator labels. Dairy and food sanitation (USA). 1987
  79. 79. Sunesen LO, Lund P, Sorensen J, Holmer G. Development of volatile compounds in processed cheese during storage. LWT-Food Science and Technology. 2002;35:128-134
  80. 80. Cattaneo TMP, Giardina C, Sinelli N, Riva M, Giangiacomo R. Application of FT-NIR and FT-IR spectroscopy to study the shelf-life of Crescenza cheese. International Dairy Journal. 2005;15:693-700
  81. 81. Zaragoza P, Ros-Lis JV, Vivancos JL, Martinez-Manez R. Proof of concept of using chromogenic arrays as a tool to identify blue cheese varieties. Food Chemistry. 2015;172:823-830
  82. 82. Bento LM, Pereira MCS, Chaves KDS, Stefani R. Development and evaluation of a smart packaging for the monitoring of ricotta cheese spoilage. MOJ Food Processing & Technology. 2015;1:9-11
  83. 83. Stratton JE, Hutkins RW, Taylor SL. Biogenic amines in cheese and other fermented foods: a review. Journal of Food Protection. 1991;54:460-470
  84. 84. Kroger M, Weaver JC. Use of protein dye-binding values as indicators of the “chemical age” of conventionally made Cheddar cheese and hydrolyzed-lactose Cheddar cheese. Journal of Food Science. 1979;44:304-305
  85. 85. Benedetti S, Sinelli N, Buratti S, Riva M. Shelf life of Crescenza cheese as measured by electronic nose. Journal of Dairy Science. 2005;88:3044-3051
  86. 86. Tavaria FK, Ferreira AS, Malcata FX. Volatile free fatty acids as ripening indicators for Serra da Estrela cheese. Journal of Dairy Science. 2004;87:4064-4072
  87. 87. Downey G, Sheehan E, Delahunty C, O’Callaghan D, Guinee T, Howard V. Prediction of maturity and sensory attributes of Cheddar cheese using near-infrared spectroscopy. International Dairy Journal. 2005;15:701-709
  88. 88. Martin-del-Campo ST, Picque D, Cosio-Ramirez R, Corrieu G. Middle infrared spectroscopy characterization of ripening stages of Camembert-type cheeses. International Dairy Journal. 2007;17:835-845
  89. 89. Tsironi T, Stamatiou A, Giannoglou, M, Velliou E, Taoukis PS. Predictive modelling and selection of time temperature integrators for monitoring the shelf life of modified atmosphere packed gilthead seabream fillets. LWT-Food Science and Technology. 2011;44:1156-1163
  90. 90. Shellhammer TH, Singh RP. Monitoring chemical and microbial changes of cottage cheese using a full-history time-temperature indicator. Journal of Food Science, 1991;56:402-405
  91. 91. Toppino PM, Cigoli A, Civardi G, Riva M. Shelf life of packed Taleggio cheese. 1: Conventional parameters evaluation and use of TTI devices [Time Temperature Indicators-Lombardy]. Scienza e Tecnica Lattiero Casearia (Italy). 2002
  92. 92. Riva M, Toppino PM, Cattaneo TMP. Use of TTI devices to monitor and evaluate the shelf-life of classic and light caprino-type cheese. Scienza e Tecnica Lattiero Casearia (Italy). 1999
  93. 93. Baughman RH, Hall LJ, Kozlov M, Smith DE, Prusik T. Time-temperature indicators comprising crystallized diacetylenic indicator compounds. U.S. Patent No. 8,813,675. U.S. Patent and Trademark Office. Washington, DC. 2014
  94. 94. Pinho O, Ferreira IM, Mendes E, Oliveira BM, Ferreira M. Effect of temperature on evolution of free amino acid and biogenic amine contents during storage of Azeitao cheese. Food Chemistry. 2001;75:287-291
  95. 95. Abdelnour A, Buchin F, Kaddour D, Tedjini S. Improved Traceability Solution Based on UHF RFID for Cheese Production Sector. IEEE Journal of Radio Frequency Identification. 2018;2:68-72
  96. 96. Regattieri A, Gamberi M, Manzini R. Traceability of food products: General framework and experimental evidence. Journal of Food Engineering. 2007;81:347-356
  97. 97. Perez-Aloe R, Valverde JM, Lara A, Castano F, Carrillo JM, Gonzalez J, Roa I. Use of RFID tags for data storage on quality control in cheese industries. In: Data Storage. IntechOpen. 2010. p. 213-226
  98. 98. Papetti P, Costa C, Antonucci F, Figorilli S, Solaini S, Menesatti P. A RFID web-based infotracing system for the artisanal Italian cheese quality traceability. Food Control. 2012;27:234-241
  99. 99. Bornhovd C, Lin T, Haller S, Schaper J. Integrating automatic data acquisition with business processes experiences with SAP's auto-ID infrastructure. In: Proceedings of the Thirtieth international conference on Very large data bases. VLDB Endowment. 2004; p. 1182-1188
  100. 100. Lopez-de-Dicastillo C, Catala R, Gavara R, Hernandez-Munoz P. Food applications of active packaging EVOH films containing cyclodextrins for the preferential scavenging of undesirable compounds. Journal of Food Engineering. 2011;104:380-386
  101. 101. Pulinas L, Spanu C, Idda I, Ibba I, Nieddu G, Virdis S, Scarano C, Piras F, Spano N, Sanna G, De Santis EPL. Production of farmstead lactose-free Pecorino di Osilo and ricotta cheeses from sheep’s milk. Italian Journal of Food Safety. 2017;6:33-39
  102. 102. Hong Q, Liu XM, Hang F, Zhao JX, Zhang H, Chen W. Screening of adjunct cultures and their application in ester formation in Camembert-type cheese. Food Microbiology. 2018;70:33-41
  103. 103. Lecanu L, Ducruet V, Jouquand C, Gratadoux JJ, Feigenbaum A. Optimization of headspace solid-phase microextraction (SPME) for the odor analysis of surface-ripened cheese. Journal of Agricultural and Food Chemistry. 2002;50:3810-3817
  104. 104. Kane W. Surface treated cheese package and method. U.S. Patent Application No. 3,784,711. U.S. Patent and Trademark Office. Washington, DC. 1974
  105. 105. Bilska A. Packaging systems for animal origin food. Scientific Journal of Logistics. 2011;7:35-44
  106. 106. Singh P, Abas Wani A, Saengerlaub S. Active packaging of food products: recent trends. Nutrition & Food Science. 2011;41:249-260
  107. 107. Crump JW, Chau CC, McKedy GE, Pyne DS, Powers TH, Solovyov SE, Hurley TJ. Oxygen, water vapor and carbon dioxide absorption in a single use container. U.S. Patent Application No. 14/3200,192. U.S. Patent and Trademark Office. Washington, DC. 2015
  108. 108. Coldchain Technology Services. [Internet] (2020) Available from: [Accessed: 2020-06-26]
  109. 109. Acerbi F, Guillard V, Aliani M, Guillaume C, Gontard N. Novel methodology for the in situ assessment of CO2 production rate and its application to anaerobic ripened cheese. Food Research International. 2015;78:295-301
  110. 110. Wang C, Yusufu D, Mills A. A smart adhesive' consume within'(CW) indicator for food packaging. Food Packaging and Shelf Life. 2019;22:100395
  111. 111. Alvarez-Lorenzo C, Concheiro A, Dubovik AS, Grinberg NV, Burova TV, Grinberg VY. Temperature-sensitive chitosan-poly (N-isopropylacrylamide) interpenetrated networks with enhanced loading capacity and controlled release properties. Journal of Controlled Release. 2005;102:629-641

Written By

Gaurav Kr Deshwal and Narender Raju Panjagari

Submitted: 28 November 2020 Reviewed: 15 December 2020 Published: 03 February 2021