Open access peer-reviewed Edited Volume

Advances in Gas Turbine Technology

Gas turbine engines will still represent a key technology in the next 20-year energy scenarios, either in stand-alone applications or in combination with other power generation equipment. This book intends in fact to provide an updated picture as well as a perspective vision of some of the major improvements that characterize the gas turbine technology in different applications, from marine and aircraft propulsion to industrial and stationary power generation. Therefore, the target audience for it involves design, analyst, materials and maintenance engineers. Also manufacturers, researchers and scientists will benefit from the timely and accurate information provided in this volume. The book is organized into five main sections including 21 chapters overall: (I) Aero and Marine Gas Turbines, (II) Gas Turbine Systems, (III) Heat Transfer, (IV) Combustion and (V) Materials and Fabrication.

Read more >Order hardcopy
IntechOpen
Advances in Gas Turbine TechnologyEdited by Ernesto Benini

Published: November 4th 2011

DOI: 10.5772/664

ISBN: 978-953-307-611-9

Copyright year: 2011

Books open for chapter submissions

129351 Total Chapter Downloads

20 Crossref Citations

55 Web of Science Citations

73 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Future Aero Engine Designs: An Evolving Vision

By Konstantinos G. Kyprianidis

6689

Open access peer-reviewed

2. State-of-Art of Transonic Axial Compressors

By Roberto Biollo and Ernesto Benini

7711

Open access peer-reviewed

3. Possible Efficiency Increasing of Ship Propulsion and Marine Power Plant with the System Combined of Marine Diesel Engine, Gas Turbine and Steam Turbine

By Marek Dzida

4248

Open access peer-reviewed

4. Exergy Analysis of a Novel SOFC Hybrid System with Zero-CO2 Emission

By Liqiang Duan, Xiaoyuan Zhang and Yongping Yang

2172

Open access peer-reviewed

5. Flexible Micro Gas Turbine Rig for Tests on Advanced Energy Systems

By Mario L. Ferrari and Matteo Pascenti

4161

Open access peer-reviewed

6. Biofuel and Gas Turbine Engines

By Marco Antônio Rosa do Nascimento and Eraldo Cruz dos Santos

5549

Open access peer-reviewed

7. Afterburning Installation Integration into a Cogeneration Power Plant with Gas Turbine by Numerical and Experimental Analysis

By Ene Barbu, Valeriu Vilag, Jeni Popescu, Silviu Ionescu, Adina Ionescu, Romulus Petcu, Cleopatra Cuciumita, Mihaiella Cretu, Constantin Vilcu and Tudor Prisecaru

1945

Open access peer-reviewed

8. Application of Statistical Methods for Gas Turbine Plant Operation Monitoring

By Li Pan

2853

Open access peer-reviewed

9. Jet Impingement Cooling in Gas Turbines for Improving Thermal Efficiency and Power Density

By Luai M. Al-Hadhrami, S.M. Shaahid and Ali A. Al-Mubarak

8396

Open access peer-reviewed

10. Influence of Heat Transfer on Gas Turbine Performance

By Diango A., Périlhon C., Danho E. and Descombes G.

4128

Open access peer-reviewed

11. Developments of Gas Turbine Combustors for Air-Blown and Oxygen-Blown IGCC

By Takeharu Hasegawa

1640

Open access peer-reviewed

12. Characterization of a Spray in the Combustion Chamber of a Low Emission Gas Turbine

By Georges Descombes

2312

Open access peer-reviewed

13. Materials for Gas Turbines – An Overview

By Nageswara Rao Muktinutalapati

46898

Open access peer-reviewed

14. Titanium in the Gas Turbine Engine

By Mark Whittaker

4213

Open access peer-reviewed

15. Platinum-Based Alloys and Coatings: Materials for the Future?

By Lesley A. Cornish and Lesley H. Chown

3852

Open access peer-reviewed

16. Unidirectionally Solidified Eutectic Ceramic Composites for Ultra-High Efficiency Gas Turbine Systems

By Yoshiharu Waku

2381

Open access peer-reviewed

17. Study of a New Type High Strength Ni-Based Superalloy DZ468 with Good Hot Corrosion Resistance

By Enze Liu and Zhi Zheng

2627

Open access peer-reviewed

18. BLISK Fabrication by Linear Friction Welding

By Antonio M. Mateo García

7202

Open access peer-reviewed

19. Damageability of Gas Turbine Blades – Evaluation of Exhaust Gas Temperature in Front of the Turbine Using a Non-Linear Observer

By Józef Błachnio and Wojciech Izydor Pawlak

4425

Open access peer-reviewed

20. New Non-Destructive Methods of Diagnosing Health of Gas Turbine Blades

By Józef Błachnio, Mariusz Bogdan and Artur Kułaszka

2307

Open access peer-reviewed

21. Repair of Turbine Blades Using Cold Spray Technique

By Kazuhiro Ogawa and Dowon Seo

3642

Edited Volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI
  • IET Inspec
  • BKCI

Order a hardcopy of the Edited Volume

Free shipping with DHL Express

Hardcover (ex. VAT)£205

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase