Rut Benavente

By Rut Benavente, Maria Dolores Salvador and Amparo Borrell

Ceramics are increasingly used as structural materials with biomedical applications due to their mechanical properties, biocompatibility, esthetic characteristics and durability. Specifically, zirconia-based compounds are commonly used to develop metal-free restorations and dental implants. The consolidation of ceramics is usually carried out through powders by means of processes that require a lot of energy, as long as processing times and high temperatures (over 1400°C) are required. In the recent years, new research is being developed in this field to reduce both energy consumption and processing time of ceramic powders. One of the most promising techniques for sintering ceramics is microwave heating technology. The main objective of this chapter is to obtain highly densified zirconia-alumina compounds by microwave technology. After sintering, the materials are characterized to determine whether the final properties meet the mechanical requirements for their final applications as dental material. Finally, the characterization of specimens treated by low-temperature degradation (LTD) is carried out after each 20 h of LTD exposure up to 200 h. In addition, the quantification of monoclinic phase by micro-Raman spectroscopy, analysis by AFM and Nomarski optical microscopy and assessment of the roughness and mechanical properties (hardness and Young’s modulus) by nanoindentation technique have been studied.

Part of the book: Smart and Advanced Ceramic Materials and Applications

By Eugeni Cañas, Rut Benavente, Amparo Borrell and Ma Dolores Salvador

Advanced ceramic coatings have been largely used in several industrial fields such as aerospace, automotive, power generation, medical or petrochemical, in order to protect or functionalise the surface of different materials. In modern industries, thermal spray processes are the most used ones to manufacture advanced ceramic coatings due to their cost advantages, flexibility and efficiency in processing ceramic materials, especially those with high melting temperature. This chapter provides a brief overview of the progress and current state of different thermal sprayed ceramics and summarises the future trend in this field. Therefore, various advanced ceramics, such as yttria-stabilised zirconia, alumina, hydroxyapatite and bioactive glasses, have been selected for analysis and discussion.

Part of the book: Ceramic Materials

By Amparo Borrell, Rut Benavente, René M. Guillén, María D. Salvador, Vaclav Pouchly, Martina Ilcikova, Richard Krumpolec and Rodrigo Moreno

Throughout the ceramic processing cycle, it is well known that a small change in the surface energy of as-received powders can have a considerable effect on the final properties of consolidated materials. The main objective of this chapter is to describe the design and manufacture of new ceramic materials based on strontium-doped lanthanum manganites, LSM (La_0.8Sr_0.2MnO₃) and LSM-8YTZP composites, for cathode in solid oxide fuel cells (SOFC) applications due to their excellent properties, by modifying the surface energy of the starting powder using techniques, such as Diffuse Coplanar Surface Barrier Discharge (DCSBD) and atomic layer deposition (ALD). Subsequently, in order to evaluate the activation energy and optimise the sintering behaviour of these powders, the Spark Plasma Sintering (SPS) technique will be used. SPS allows the complete densification of pieces by fast and low-energy consumption processing.

Part of the book: Ceramic Materials