Chapters authored
The Asymmetric Flexure Hinge Structures and the Hybrid Excitation Methods for Piezoelectric Stick-Slip Actuators
Piezoelectric stick–slip actuators have become viable candidates for precise positioning and precise metering due to simple structure and long stroke. To improve the performances of the piezoelectric stick–slip actuators, our team deeply studies the actuators from both structural designs and driving methods. In terms of structural designs, the trapezoid-type, asymmetrical flexure hinges and mode conversion piezoelectric stick–slip actuators are proposed to improve the velocity and load based on the asymmetric structure; besides, a piezoelectric stick–slip actuator with a coupled asymmetrical flexure hinge mechanism is also developed to achieve the bidirectional motion. In terms of driving methods, a non-resonant mode smooth driving method (SDM) based on ultrasonic friction reduction is first proposed to restrain the backward motion during the rapid contraction stage. Then, a resonant mode SDM is further developed to improve the output performance of the piezoelectric stick–slip actuator. On this basis, the low voltage and symmetry of the SDM are also discussed. Finally, the direction-guidance hybrid method (DGHM) excitation method is presented to achieve superior performance, especially for high speed.
Part of the book: Piezoelectric Actuators
Topology Optimization Methods for Flexure Hinge Type Piezoelectric Actuators
Piezoelectric actuators have the obvious advantages of simple and compact structure, high precision and long stroke. However, it is difficult to satisfy the various industrial requirements. Topology optimization method can be used to find the new configurations of the compliant mechanism, and different objective function and constraint conditions can be flexibly used to determine the compliant mechanism. In the research of piezoelectric actuators, due to the advantages of compact structure, no lubrication and large displacement magnification, compliant mechanism is extremely suitable to be introduced into the design of piezoelectric actuators. In recent years, topology optimization method is frequently used to design the compliant mechanism on piezoelectric actuator, and has become a research hotspot. In this chapter, the development of topology optimization method is introduced, the design and research on the compliant mechanism of piezoelectric actuator have been summarized, and the future research direction and challenges of topology optimization design for flexure hinge type piezoelectric actuators are prospected.
Part of the book: Piezoelectric Actuators
A Review of Modeling and Control of Piezoelectric Stick-Slip Actuators
Piezoelectric stick-slip actuators with high precision, large actuating force, and high displacement resolution are currently widely used in the field of high-precision micro-nano processing and manufacturing. However, the non-negligible, non-linear factors and complexity of their characteristics make its modeling and control quite difficult and affect the positioning accuracy and stability of the system. To obtain higher positioning accuracy and efficiency, modeling and control of piezoelectric stick-slip actuators are meaningful and necessary. Firstly, according to the working principle of stick-slip drive, this paper introduces the sub-models with different characteristics, such as hysteresis, dynamics, and friction, and presents the comprehensive modeling representative piezoelectric stick-slip actuators. Next, the control approaches suggested by different scholars are also summarized. Appropriate control strategies are adopted to reduce its tracking error and position error in response to the influence of various factors. Lastly, future research and application prospects in modeling and control are pointed out.
Part of the book: Piezoelectric Actuators