Mr. Ahed Habib is a researcher in the field of structural engineering. He received his BS and MS degrees from Eastern Mediterranean University. His research interests include seismic performance assessment and retrofitting of RC buildings, vibration-based damage detection of structures and infrastructures and applications of non-biodegradable wastes as aggregates replacement in concrete production activities.
In recent years, many researchers in the construction industry had taken up the challenge to incorporate non-biodegradable wastes as partial replacement of cement and/or natural aggregates in the daily production of cement-based materials. Various efforts were intended to understand the influence of using marble dust in concrete due to its availability and a relatively high volume of the generation that causes serious environmental problems. Previous studies have utilized marble dust as a replacement of cement, fine aggregate, or total paste in the concrete and mortar mixtures. In general, several investigations have shown that up to a certain cement replacement ratio, marble dust can positively impact on the strength and microstructure properties of concrete. Furthermore, the results have indicated that the considerably high degree of fineness in the marble dust provides sufficient cohesiveness of mortar and concrete even in low w/c ratio conditions. Hence, this powder can be utilized as a filler to improve the flowability of cement-based materials. Consequently, this chapter aims to summarize recent investigations on the properties of concrete incorporating marble waste as cement replacement materials, highlight the potential gaps in the literature, and propose a prediction model for estimating the compressive and flexural strengths of concrete with marble dust using regression analysis.
Part of the book: Cement Industry