In conventional concrete-encased steel composite columns, a steel section is placed at the center of the cross section. Thus, the contribution of the steel section to the overall flexural capacity of the column could be limited. For better efficiency and economy, particularly under biaxial moment, the steel section needs to be placed at the corners, rather than at the center of the cross section. Recently, a prefabricated steel-reinforced concrete column has been developed to utilize the advantages of the reinforced concrete column and the steel-concrete composite column. In the composite column, four steel angles are placed at the corners of the cross section, and transverse bars and plates are used to connect the angles by welding or bolting. The composite column has been widely applied to industrial buildings that require large sized columns and fast construction. In this chapter, the newly developed composite column is introduced, and basic mechanism, structural performance, and field application case are discussed.
Part of the book: New Trends in Structural Engineering