In order to judge the inside insulation fault of SF6 insulated equipment, the gas-sensing properties to a series of characteristic SF6 decomposition components, SOF2, SO2F2, SO2, H2S, CF4, HF, and SF6, have been studied. In this study, a comparative study of these gas-sensing materials has been made in theoretical and experimental fields to find the optimal gas-sensing material, and put forward the effective approaches to improve the gas-sensing properties of materials.
Part of the book: Nanomaterials Based Gas Sensors for SF6 Decomposition Components Detection
As a significant equipment in power system, the operation condition of transformers directly determines the safety of power system. Therefore, it has been an indispensable measure to detect and analyze the dissolved gases in transformers, aiming to estimate the early potential faults in oil‐insulated transformers. In this chapter, the adsorption processes between modified carbon nanotubes (CNTs) (CNTs‐OH, Ni‐CNTs) and dissolved gases in transformers oil including C2H2, C2H4, C2H6, CH4, CO, and H2 have been simulated based on the first principle theory. Meanwhile, the density of states (DOS), adsorption energy, charge transfer amount, and adsorption distance of adsorption process between CNTs and dissolved gases were calculated. Moreover, two kinds of sensors, mixed acid‐modified CNTs and NiCl2‐modified CNTs, are prepared to conduct the dissolved gases response experiment. Then, the gas response mechanisms were investigated. Finally, the results between response experiment and theoretical calculation were compared, reflecting a good coherence with each other. The CNTs gas sensors possess a relatively high sensitivity and fine linearity, and could be employed in dissolved gas analysis equipment in transformer.
Part of the book: Electrochemical Sensors Technology