Chapters authored
Hexavalent Chromium (VI) Removal by Penicillium sp. IA-01
The objective of this work was to study the removal of chromium (VI) in aqueous solution by the fungus Penicillium sp. IA-01, isolated from polluted air with industrial vapors. To obtain the fungal biomass, pre-inoculums were performed in thioglycolate broth from a strain isolated from vapours contaminated with Cr (VI). The fungus was incubated for four weeks at ambient temperature, filtered, and washed three times with trideionized water. In preparing cellullar fractions, it was necessary to break the fungal cells with glass beads using a homogenizer being careful to keep the samples in frosty cold ice. To obtain the fungal biomass, the fungus was filtered and stored in an oven at 80°C, allowing it to dry for 48 h. Removal of Cr (VI) in vitro was evaluated using different cellular fractions and dead fungal biomass. We determine the optimal characteristics for metal removal in the reaction mixture. Concluding that the ideal conditions for the removal of Cr (VI) in the cell extracts were 37°C and pH 7.0, also we observ that the highest enzyme activity was in the mixed membrane fraction. In dead fungal biomass, the ideal conditions for removal of metal are 60°C and pH 1.0.
Part of the book: Advances in Bioremediation of Wastewater and Polluted Soil
Biosorption of Heavy Metals by Candida albicans
The objective of this work was to study the resistance and removal capacity of heavy metals by the yeast Candida albicans. The resistance of some heavy metals was analyzed: the yeast grows in 2000 ppm of chromium, zinc, lead, and copper, 1500 ppm of arsenic (III), 500 ppm of silver, and little bit in cobalt (300 ppm) and mercury and cadmium (200 ppm). Analyzing its potential to remove heavy metals, it can efficiently remove is as follows: Cr(VI) (76%), lead (57%), silver (51%), cadmium (46%), fairly arsenic(III) (40% with the modified biomass), cobalt (37%), mercury (36%), copper (31%), little bit zinc (22%), and fluoride (10%). We determine the optimal characteristics for chromium(VI) removal in living cells and death biomass. The ideal conditions for the removal of 50 mg/L of Cr(VI) in living cells were 28°C, pH 7.0, and 10 × 106 yeast/mL, with glycerol-like carbon source. In dead yeast biomass, the ideal conditions for removal of metal are 200 mg/L of Cr(VI), 60°C, pH 1.0, 20 h, and 5 g of biomass.
Part of the book: Advances in Bioremediation and Phytoremediation