Chapters authored
Applications of Carbon Based Materials in Developing Advanced Energy Storage Devices
With the increasing pressure of population, the energy demand is growing explosively. By 2050, it is expected that the world population may reach to about 9 billion which may result in the increase of energy requirement to about 12.5 trillion watts. Due to increasing pressures of population, industries and technology, concerns to find possibilities to cope with increasing demand of energy resources, arise. Although the renewable energy resources including fossil fuels, wind, water and solar energy have been used for a long time to fulfill the energy requirements, but they need efficient conversions and storage techniques and are responsible for causing environmental pollution due to greenhouse gases as well. It is thus noteworthy to develop methods for the generation and storage of renewable energy devices that can replace the conventional energy resources to meet the requirement of energy consumption. Due to high energy demands, the sustainable energy storage devices have remained the subject of interest for scientists in the history, however, the traditional methods are not efficient enough to fulfill the energy requirements. In the present era, among other variety of advanced treatments, nano-sciences have attracted the attention of the scientists. While talking about nano-science, one cannot move on without admiring the extraordinary features of carbon nanotubes (CNTs) and other carbon based materials. CNTs are on the cutting edge of nano science research and finding enormous applications in energy storage devices. Excellent adsorption capabilities, high surface area, better electrical conductivity, high mechanical strength, corrosion resistance, high aspect ratio and good chemical and physical properties of CNTs have grabbed tremendous attention worldwide. Their charge transfer properties make them favorable for energy conversion applications. The limitation to the laboratory research on CNTs for energy storage techniques due to low specific capacitance and limited electrochemical performance can be overcome by surface functionalization using surface functional groups that can enhance their electrical and dispersion properties. In this chapter, ways CNTs employed to boost the abilities of the existing material used to store and transfer of energy have been discussed critically. Moreover, how anisotropic properties of CNTs play important role in increasing the energy storage capabilities of functional materials. It will also be discussed how various kinds of materials can be combined along CNTs to get better results.
Part of the book: Carbon Nanotubes