Chapters authored
Experimental Results of the Tribology of Aluminum in the Presence of Polytron Additive
Friction is an ever-present obstacle that causes energy loss in mechanical parts. To alleviate this nuisance, we carried out experimental studies on a brand new additive called Polytron to assess its role in the minimization of friction and wear. The wear, the volume wear rate, the wear coefficient, and the coefficient of friction of the aluminum surface were measured at room temperature with pin-on-disk tribometer without and with 10% Polytron in Helix oil. In the base oil Helix, their values were found to be 70 μm, 1.28×10−3mm3/min, 1.27×10−10m2/N, and 0.012, respectively, which with the incorporation of Polytron additive in the Helix oil correspondingly reduced to 20μm, 6.08×10−5mm3/min, 4.22×10−11m2N, and 0.004. The experimental verdict points to an ionic character of the additive in that it impregnates the crystal structure of the metal, thereby prompting a hard surface layer which subsequently curtails wear and friction.
Part of the book: Friction, Lubrication and Wear