Chapters authored
Laboratory Optimization Study of Sulfonation Reaction toward Lignin Isolated from Bagasse
Bagasse is scientifically defined as waste from the extraction of sugarcane liquid after the grinding process. Bagasse is biomass which is used as raw material to be processed into surfactants. Bagasse fiber cannot be dissolved in water because it consists mostly of cellulose, pentosane and lignin. The optimum conditions for obtaining the highest yield and the best conversion of bagasse to lignin were achieved when used 80 mesh bagasse and 3 M NaOH as a hydrolysis agent. Then lignin is reacted with 0.25 sodium bisulfite to the surfactant sodium lignosulfonate. Lignin and sodium lignosulfonate were further characterized using a FTIR spectrophotometer to determine the components contained therein. The lignin component consists of phenolic functional group elements, aliphatic and aromatic groups, ketone groups, aren functional groups, amine groups and alkyl groups along with standard lignin components. Likewise with lignosulfonates, with indicator components consisting of C═C alkenes, Sulfate S═O, C═O carboxylic acids and S-OR esters. The NMR test was resulted the monomer structure of SLS surfactant bagasse. The results indicate that the lignin isolation process from bagasse has been successfully. Likewise, the sulfonation of lignin to lignosulfonate is also successful.
Part of the book: Biotechnological Applications of Biomass
Potential of Bagasse as Raw Material for Lignosulfonate Surfactant
Anionic surfactants are generally used in surfactant injections because they are good, resistant in storage and stable. Furthermore, Commercially, anions are produced in the form of carboxylates, sulfates, sulfonates, phosphates, or phosphonates. The surfactants used in the process of implementing Enhanced Oil Recovery (EOR) are generally petroleum-based, such as Petroleum Sulfonate. Therefore, an increase in oil price, leads to an increase in the price of surfactant and the operational costs becomes relatively expensive. Lignosulfonate is a type of anionic surfactant which is made with lignin as raw material. This lignin is found in many plants, including wood stalks, plant leaves, peanut shells, corn cobs, bagasse, empty bunches of oil palm and wheat straw. Based on the results of previous studies, 25% of lignin component was discovered in bagasse. This may be a consideration that there is enough lignin in bagasse to be used as raw material in the production of lignosulfonate vegetable surfactants. Furthermore, lignin from bagasse is used because bagasse is easy to obtain, cheap and an environmental friendly vegetable waste. Currently, bagasse is only used as fuel in steam boilers and papermaking, cement and brick reinforcement, a source of animal feed, bioethanol, activated charcoal as adsorbent and compost fertilizer. This is a consideration to optimize the use of bagasse to become lignosulfonate as an alternative for surfactants in the petroleum sector. The purpose of this study is to show that lignin from bagasse has the potential of becoming a lignosulfonate surfactant. There are several studies that have processed bagasse into sodium lignosulfonate. The component test on the results showed that the surfactant component of sodium lignosulfonate from bagasse was almost the same as the commercial standard lignosulfonate component. Furthermore, the results of the HLB (Hydrophilic–Lipophilic Balance) value test show that the sodium lignosulfonate surfactant from bagasse can function as an emulsion form which is a required parameter for the surfactant injection mechanism. Based on the discussion of the study results, bagasse has the potential as a raw material to be processed into lignosulfonates.
Part of the book: Sugarcane
The Importance of Microemulsion for the Surfactant Injection Process in Enhanced Oil Recovery
Microemulsion is the main parameter that determines the performance of a surfactant injection system. According to Myers, there are four main mechanisms in the enhanced oil recovery (EOR) surfactant injection process, namely interface tension between oil and surfactant, emulsification, decreased interfacial tension and wettability. In the EOR process, the three-phase regions can be classified as type I, upper-phase emulsion, type II, lower-phase emulsion and type III, middle-phase microemulsion. In the middle-phase emulsion, some of the surfactant grains blend with part of the oil phase so that the interfacial tension in the area is reduced. The decrease in interface tension results in the oil being more mobile to produce. Thus, microemulsion is an important parameter in the enhanced oil recovery process.
Part of the book: Surfactants and Detergents