Moisés Montiel-González

By Yuridiana Rocio Galindo Luna, Rosenberg Javier Romero Domínguez, Jonathan Ibarra Bahena, Moises Montiel González, Jesús Cerezo Román, José Eduardo Jasso Almazán, Antonio Rodríguez Martínez, Karina Solano Olivares, Ana María Hernández Jasso, Sotsil Silva Sotelo, José Antonio García Ramos, Ariana Morales Flores and Brenda Rivas Herrea

In this chapter, the methodology to determinate heat load is revised and presented. The main parameters must be fixed as function of climatization, internal thermic conditions (comfort, temperature, and humid) and the activities. According with literature, the roof structural requirements were checked. These are an important parameter because it represents the limits to the system such as load by devices (weight of equipment), orientation in solar systems (operating conditions), and building materials. The method of calculation of solar available is shown; the aim is to achieve the major collection of solar energy. Finally, the plate heat exchangers can be fabricated in gasketed, welded or module welded design characterized by the model in which the flow channels for the two heat exchanging media are sealed. The kind of exchanger is suitable depending on your requirements. The thermodynamic method of calculation of sizing the exchangers is reviewed. The aim of this section is to find the suitable devices for the operation of air-conditioning absorption system based on hydroxide.

Part of the book: Sustainable Air Conditioning Systems