\\n\\n
Released this past November, the list is based on data collected from the Web of Science and highlights some of the world’s most influential scientific minds by naming the researchers whose publications over the previous decade have included a high number of Highly Cited Papers placing them among the top 1% most-cited.
\\n\\nWe wish to congratulate all of the researchers named and especially our authors on this amazing accomplishment! We are happy and proud to share in their success!
\\n"}]',published:!0,mainMedia:null},components:[{type:"htmlEditorComponent",content:'IntechOpen is proud to announce that 179 of our authors have made the Clarivate™ Highly Cited Researchers List for 2020, ranking them among the top 1% most-cited.
\n\nThroughout the years, the list has named a total of 252 IntechOpen authors as Highly Cited. Of those researchers, 69 have been featured on the list multiple times.
\n\n\n\nReleased this past November, the list is based on data collected from the Web of Science and highlights some of the world’s most influential scientific minds by naming the researchers whose publications over the previous decade have included a high number of Highly Cited Papers placing them among the top 1% most-cited.
\n\nWe wish to congratulate all of the researchers named and especially our authors on this amazing accomplishment! We are happy and proud to share in their success!
\n'}],latestNews:[{slug:"intechopen-authors-included-in-the-highly-cited-researchers-list-for-2020-20210121",title:"IntechOpen Authors Included in the Highly Cited Researchers List for 2020"},{slug:"intechopen-maintains-position-as-the-world-s-largest-oa-book-publisher-20201218",title:"IntechOpen Maintains Position as the World’s Largest OA Book Publisher"},{slug:"all-intechopen-books-available-on-perlego-20201215",title:"All IntechOpen Books Available on Perlego"},{slug:"oiv-awards-recognizes-intechopen-s-editors-20201127",title:"OIV Awards Recognizes IntechOpen's Editors"},{slug:"intechopen-joins-crossref-s-initiative-for-open-abstracts-i4oa-to-boost-the-discovery-of-research-20201005",title:"IntechOpen joins Crossref's Initiative for Open Abstracts (I4OA) to Boost the Discovery of Research"},{slug:"intechopen-hits-milestone-5-000-open-access-books-published-20200908",title:"IntechOpen hits milestone: 5,000 Open Access books published!"},{slug:"intechopen-books-hosted-on-the-mathworks-book-program-20200819",title:"IntechOpen Books Hosted on the MathWorks Book Program"},{slug:"intechopen-s-chapter-awarded-the-guenther-von-pannewitz-preis-2020-20200715",title:"IntechOpen's Chapter Awarded the Günther-von-Pannewitz-Preis 2020"}]},book:{item:{type:"book",id:"8504",leadTitle:null,fullTitle:"Pectins - Extraction, Purification, Characterization and Applications",title:"Pectins",subtitle:"Extraction, Purification, Characterization and Applications",reviewType:"peer-reviewed",abstract:"This book deepens the study and knowledge on pectins, especially in the processes of extraction, purification, and characterization, in short its many and wide applications. Among the most prominent applications are the food, pharmaceutical, and other industries. The development of pectins has a very promising future with a marked annual increase and with a wide range of sources. As written above, this book will help its readers to expand their knowledge on this biopolymer with vast application in the industry worldwide.",isbn:"978-1-78984-072-8",printIsbn:"978-1-78984-071-1",pdfIsbn:"978-1-83968-550-7",doi:"10.5772/intechopen.78880",price:119,priceEur:129,priceUsd:155,slug:"pectins-extraction-purification-characterization-and-applications",numberOfPages:178,isOpenForSubmission:!1,isInWos:null,hash:"ff1acef627b277c575a10b3259dd331b",bookSignature:"Martin Masuelli",publishedDate:"January 22nd 2020",coverURL:"https://cdn.intechopen.com/books/images_new/8504.jpg",numberOfDownloads:5675,numberOfWosCitations:0,numberOfCrossrefCitations:5,numberOfDimensionsCitations:18,hasAltmetrics:0,numberOfTotalCitations:23,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"September 12th 2018",dateEndSecondStepPublish:"November 26th 2018",dateEndThirdStepPublish:"January 25th 2019",dateEndFourthStepPublish:"April 15th 2019",dateEndFifthStepPublish:"June 14th 2019",currentStepOfPublishingProcess:5,indexedIn:"1,2,3,4,5,6",editedByType:"Edited by",kuFlag:!1,editors:[{id:"99994",title:"Dr.",name:"Martin",middleName:"Alberto",surname:"Masuelli",slug:"martin-masuelli",fullName:"Martin Masuelli",profilePictureURL:"https://mts.intechopen.com/storage/users/99994/images/system/99994.jpg",biography:"Martin Masuelli is a Inv. Adj. of Instituto de Física Aplicada – CONICET – UNSL and Associate Professor-UNSL, San Luis, Argentina. He holds a master’s degree and a Ph.D. and Master's thesis in Membrane Technology from the National University of San Luis (UNSL). He is Director of Physics Chemistry Service Laboratory, UNSL. He is an expert in polysaccharides and physics chemistry of macromolecules. He is author or co-author of more than 30 peer-reviewed international publications, 8 book chapters, 75 communications in national and international congresses, editor of six books. He is a member of the Sociedad Argentina de Ciencia y Tecnología Ambiental, Asociación Argentina de Fisicoquímica y Química Inorgánica and Asociación Argentina de Tecnólogos Alimentarios. He is Editor in Chief and Founder, in July 2013, of Journal of Polymer and Biopolymers Physics Chemistry, Science and Education Publishing. He is on the editorial board of numerous journals.",institutionString:"Universidad Nacional de San Luis",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"3",totalChapterViews:"0",totalEditedBooks:"2",institution:{name:"National University of San Luis",institutionURL:null,country:{name:"Argentina"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"333",title:"Food Chemistry",slug:"food-science-food-chemistry"}],chapters:[{id:"69850",title:"Extraction and Characterization of Pectins From Peels of Criolla Oranges (Citrus sinensis): Experimental Reviews",doi:"10.5772/intechopen.88944",slug:"extraction-and-characterization-of-pectins-from-peels-of-criolla-oranges-em-citrus-sinensis-em-exper",totalDownloads:672,totalCrossrefCites:0,totalDimensionsCites:2,signatures:"Paula Ruano, Lismet Lazo Delgado, Sergio Picco, Liliana Villegas, Franco Tonelli, Mario Eduardo Aguilera Merlo, Javier Rigau, Darío Diaz and Martin Masuelli",downloadPdfUrl:"/chapter/pdf-download/69850",previewPdfUrl:"/chapter/pdf-preview/69850",authors:[{id:"99994",title:"Dr.",name:"Martin",surname:"Masuelli",slug:"martin-masuelli",fullName:"Martin Masuelli"}],corrections:null},{id:"66671",title:"Extraction and Purification of Pectin from Agro-Industrial Wastes",doi:"10.5772/intechopen.85585",slug:"extraction-and-purification-of-pectin-from-agro-industrial-wastes",totalDownloads:1447,totalCrossrefCites:0,totalDimensionsCites:1,signatures:"Erumalla Venkatanagaraju, N. Bharathi, Rachiraju Hema Sindhuja, Rajshree Roy Chowdhury and Yarram Sreelekha",downloadPdfUrl:"/chapter/pdf-download/66671",previewPdfUrl:"/chapter/pdf-preview/66671",authors:[null],corrections:null},{id:"66458",title:"Pectin - Extraction, Purification, Characterization and Applications",doi:"10.5772/intechopen.85588",slug:"pectin-extraction-purification-characterization-and-applications",totalDownloads:466,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Virginia Rodríguez Robledo* and Lucía Isabel Castro Vázquez",downloadPdfUrl:"/chapter/pdf-download/66458",previewPdfUrl:"/chapter/pdf-preview/66458",authors:[null],corrections:null},{id:"65793",title:"Role of Pectin in Food Processing and Food Packaging",doi:"10.5772/intechopen.83677",slug:"role-of-pectin-in-food-processing-and-food-packaging",totalDownloads:1793,totalCrossrefCites:4,totalDimensionsCites:10,signatures:"Thiraviam Vanitha and Mahejibin Khan",downloadPdfUrl:"/chapter/pdf-download/65793",previewPdfUrl:"/chapter/pdf-preview/65793",authors:[null],corrections:null},{id:"65638",title:"Pectins as Emulsifying Agent on the Preparation, Characterization, and Photocatalysis of Nano-LaCrO3",doi:"10.5772/intechopen.83625",slug:"pectins-as-emulsifying-agent-on-the-preparation-characterization-and-photocatalysis-of-nano-lacro-su",totalDownloads:318,totalCrossrefCites:1,totalDimensionsCites:2,signatures:"Rudy Tahan Mangapul Situmeang",downloadPdfUrl:"/chapter/pdf-download/65638",previewPdfUrl:"/chapter/pdf-preview/65638",authors:[null],corrections:null},{id:"66396",title:"Properties of Wine Polysaccharides",doi:"10.5772/intechopen.85629",slug:"properties-of-wine-polysaccharides",totalDownloads:549,totalCrossrefCites:0,totalDimensionsCites:2,signatures:"Leticia Martínez-Lapuente, Zenaida Guadalupe and Belén Ayestarán",downloadPdfUrl:"/chapter/pdf-download/66396",previewPdfUrl:"/chapter/pdf-preview/66396",authors:[{id:"207851",title:"Dr.",name:"Zenaida",surname:"Guadalupe",slug:"zenaida-guadalupe",fullName:"Zenaida Guadalupe"},{id:"207853",title:"Dr.",name:"Belén",surname:"Ayestarán",slug:"belen-ayestaran",fullName:"Belén Ayestarán"},{id:"207854",title:"Dr.",name:"Leticia",surname:"Martínez-Lapuente",slug:"leticia-martinez-lapuente",fullName:"Leticia Martínez-Lapuente"}],corrections:null},{id:"65895",title:"Flavonoids and Pectins",doi:"10.5772/intechopen.84960",slug:"flavonoids-and-pectins",totalDownloads:441,totalCrossrefCites:0,totalDimensionsCites:1,signatures:"Zhiping Zhang, Yanzhi He and Xinyue Zhang",downloadPdfUrl:"/chapter/pdf-download/65895",previewPdfUrl:"/chapter/pdf-preview/65895",authors:[null],corrections:null}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},relatedBooks:[{type:"book",id:"2828",title:"Fiber Reinforced Polymers",subtitle:"The Technology Applied for Concrete Repair",isOpenForSubmission:!1,hash:"4922c593466cc822b281fe7cc7d7fef6",slug:"fiber-reinforced-polymers-the-technology-applied-for-concrete-repair",bookSignature:"Martin Alberto Masuelli",coverURL:"https://cdn.intechopen.com/books/images_new/2828.jpg",editedByType:"Edited by",editors:[{id:"99994",title:"Dr.",name:"Martin",surname:"Masuelli",slug:"martin-masuelli",fullName:"Martin Masuelli"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1408",title:"Scientific, Health and Social Aspects of the Food Industry",subtitle:null,isOpenForSubmission:!1,hash:"e683dc398eabec0db3a88e891209a406",slug:"scientific-health-and-social-aspects-of-the-food-industry",bookSignature:"Benjamin Valdez",coverURL:"https://cdn.intechopen.com/books/images_new/1408.jpg",editedByType:"Edited by",editors:[{id:"65522",title:"Dr.",name:"Benjamin",surname:"Valdez",slug:"benjamin-valdez",fullName:"Benjamin Valdez"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5060",title:"Milk Proteins",subtitle:"From Structure to Biological Properties and Health Aspects",isOpenForSubmission:!1,hash:"4a7d2e5f38e97aaea90bb3fec55b3751",slug:"milk-proteins-from-structure-to-biological-properties-and-health-aspects",bookSignature:"Isabel Gigli",coverURL:"https://cdn.intechopen.com/books/images_new/5060.jpg",editedByType:"Edited by",editors:[{id:"175679",title:"Dr.",name:"Isabel",surname:"Gigli",slug:"isabel-gigli",fullName:"Isabel Gigli"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6761",title:"Generation of Aromas and Flavours",subtitle:null,isOpenForSubmission:!1,hash:"32cb87c823ee53fcbff7ecb2e944d4b9",slug:"generation-of-aromas-and-flavours",bookSignature:"Alice Vilela",coverURL:"https://cdn.intechopen.com/books/images_new/6761.jpg",editedByType:"Edited by",editors:[{id:"181011",title:"Prof.",name:"Alice",surname:"Vilela",slug:"alice-vilela",fullName:"Alice Vilela"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8311",title:"Nutraceuticals",subtitle:"Past, Present and Future",isOpenForSubmission:!1,hash:"51994c7d3887b9ecd6926b4967a4fdfb",slug:"nutraceuticals-past-present-and-future",bookSignature:"María Chávarri Hueda",coverURL:"https://cdn.intechopen.com/books/images_new/8311.jpg",editedByType:"Edited by",editors:[{id:"150285",title:"Dr.",name:"María",surname:"Chávarri Hueda",slug:"maria-chavarri-hueda",fullName:"María Chávarri Hueda"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8625",title:"Whey",subtitle:"Biological Properties and Alternative Uses",isOpenForSubmission:!1,hash:"449a36f43c9a30ae4d43f9775599e8ac",slug:"whey-biological-properties-and-alternative-uses",bookSignature:"Isabel Gigli",coverURL:"https://cdn.intechopen.com/books/images_new/8625.jpg",editedByType:"Edited by",editors:[{id:"175679",title:"Dr.",name:"Isabel",surname:"Gigli",slug:"isabel-gigli",fullName:"Isabel Gigli"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7332",title:"Some New Aspects of Colloidal Systems in Foods",subtitle:null,isOpenForSubmission:!1,hash:"0dd822267e027684bd3ff53da4f2ef41",slug:"some-new-aspects-of-colloidal-systems-in-foods",bookSignature:"Jafar M. Milani",coverURL:"https://cdn.intechopen.com/books/images_new/7332.jpg",editedByType:"Edited by",editors:[{id:"91158",title:"Associate Prof.",name:"Jafar",surname:"Milani",slug:"jafar-milani",fullName:"Jafar Milani"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6878",title:"Frontiers and New Trends in the Science of Fermented Food and Beverages",subtitle:null,isOpenForSubmission:!1,hash:"aaeaec7ab2b300434df9061448772e57",slug:"frontiers-and-new-trends-in-the-science-of-fermented-food-and-beverages",bookSignature:"Rosa Lidia Solís-Oviedo and Ángel de la Cruz Pech-Canul",coverURL:"https://cdn.intechopen.com/books/images_new/6878.jpg",editedByType:"Edited by",editors:[{id:"227052",title:"Dr.",name:"Rosa Lidia",surname:"Solís-Oviedo",slug:"rosa-lidia-solis-oviedo",fullName:"Rosa Lidia Solís-Oviedo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],ofsBooks:[]},correction:{item:{id:"74251",slug:"corrigendum-to-enhancing-soil-properties-and-maize-yield-through-organic-and-inorganic-nitrogen-and",title:"Corrigendum to: Enhancing Soil Properties and Maize Yield through Organic and Inorganic Nitrogen and Diazotrophic Bacteria",doi:null,correctionPDFUrl:"https://cdn.intechopen.com/pdfs/74251.pdf",downloadPdfUrl:"/chapter/pdf-download/74251",previewPdfUrl:"/chapter/pdf-preview/74251",totalDownloads:null,totalCrossrefCites:null,bibtexUrl:"/chapter/bibtex/74251",risUrl:"/chapter/ris/74251",chapter:{id:"71840",slug:"enhancing-soil-properties-and-maize-yield-through-organic-and-inorganic-nitrogen-and-diazotrophic-ba",signatures:"Arshad Jalal, Kamran Azeem, Marcelo Carvalho Minhoto Teixeira Filho and Aeysha Khan",dateSubmitted:"May 29th 2019",dateReviewed:"March 6th 2020",datePrePublished:"April 20th 2020",datePublished:"June 17th 2020",book:{id:"9345",title:"Sustainable Crop Production",subtitle:null,fullTitle:"Sustainable Crop Production",slug:"sustainable-crop-production",publishedDate:"June 17th 2020",bookSignature:"Mirza Hasanuzzaman, Marcelo Carvalho Minhoto Teixeira Filho, Masayuki Fujita and Thiago Assis Rodrigues Nogueira",coverURL:"https://cdn.intechopen.com/books/images_new/9345.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"76477",title:"Dr.",name:"Mirza",middleName:null,surname:"Hasanuzzaman",slug:"mirza-hasanuzzaman",fullName:"Mirza Hasanuzzaman"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"190597",title:"Dr.",name:"Marcelo Carvalho Minhoto",middleName:null,surname:"Teixeira Filho",fullName:"Marcelo Carvalho Minhoto Teixeira Filho",slug:"marcelo-carvalho-minhoto-teixeira-filho",email:"mcm.teixeira-filho@unesp.br",position:null,institution:{name:"Sao Paulo State University",institutionURL:null,country:{name:"Brazil"}}},{id:"322298",title:"Dr.",name:"Aeysha",middleName:null,surname:"Khan",fullName:"Aeysha Khan",slug:"aeysha-khan",email:"fhw9uhfig@gmail.com",position:null,institution:null},{id:"322299",title:"Dr.",name:"Kamran",middleName:null,surname:"Azeem",fullName:"Kamran Azeem",slug:"kamran-azeem",email:"gisfgiog34sg@gmail.com",position:null,institution:null},{id:"322301",title:"Dr.",name:"Arshad",middleName:null,surname:"Jalal",fullName:"Arshad Jalal",slug:"arshad-jalal",email:"gisfgiog3465sg@gmail.com",position:null,institution:null}]}},chapter:{id:"71840",slug:"enhancing-soil-properties-and-maize-yield-through-organic-and-inorganic-nitrogen-and-diazotrophic-ba",signatures:"Arshad Jalal, Kamran Azeem, Marcelo Carvalho Minhoto Teixeira Filho and Aeysha Khan",dateSubmitted:"May 29th 2019",dateReviewed:"March 6th 2020",datePrePublished:"April 20th 2020",datePublished:"June 17th 2020",book:{id:"9345",title:"Sustainable Crop Production",subtitle:null,fullTitle:"Sustainable Crop Production",slug:"sustainable-crop-production",publishedDate:"June 17th 2020",bookSignature:"Mirza Hasanuzzaman, Marcelo Carvalho Minhoto Teixeira Filho, Masayuki Fujita and Thiago Assis Rodrigues Nogueira",coverURL:"https://cdn.intechopen.com/books/images_new/9345.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"76477",title:"Dr.",name:"Mirza",middleName:null,surname:"Hasanuzzaman",slug:"mirza-hasanuzzaman",fullName:"Mirza Hasanuzzaman"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"190597",title:"Dr.",name:"Marcelo Carvalho Minhoto",middleName:null,surname:"Teixeira Filho",fullName:"Marcelo Carvalho Minhoto Teixeira Filho",slug:"marcelo-carvalho-minhoto-teixeira-filho",email:"mcm.teixeira-filho@unesp.br",position:null,institution:{name:"Sao Paulo State University",institutionURL:null,country:{name:"Brazil"}}},{id:"322298",title:"Dr.",name:"Aeysha",middleName:null,surname:"Khan",fullName:"Aeysha Khan",slug:"aeysha-khan",email:"fhw9uhfig@gmail.com",position:null,institution:null},{id:"322299",title:"Dr.",name:"Kamran",middleName:null,surname:"Azeem",fullName:"Kamran Azeem",slug:"kamran-azeem",email:"gisfgiog34sg@gmail.com",position:null,institution:null},{id:"322301",title:"Dr.",name:"Arshad",middleName:null,surname:"Jalal",fullName:"Arshad Jalal",slug:"arshad-jalal",email:"gisfgiog3465sg@gmail.com",position:null,institution:null}]},book:{id:"9345",title:"Sustainable Crop Production",subtitle:null,fullTitle:"Sustainable Crop Production",slug:"sustainable-crop-production",publishedDate:"June 17th 2020",bookSignature:"Mirza Hasanuzzaman, Marcelo Carvalho Minhoto Teixeira Filho, Masayuki Fujita and Thiago Assis Rodrigues Nogueira",coverURL:"https://cdn.intechopen.com/books/images_new/9345.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"76477",title:"Dr.",name:"Mirza",middleName:null,surname:"Hasanuzzaman",slug:"mirza-hasanuzzaman",fullName:"Mirza Hasanuzzaman"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}}},ofsBook:{item:{type:"book",id:"8074",leadTitle:null,title:"Lyme Disease",subtitle:null,reviewType:"peer-reviewed",abstract:"This book will be a self-contained collection of scholarly papers targeting an audience of practicing researchers, academics, PhD students and other scientists. The contents of the book will be written by multiple authors and edited by experts in the field.",isbn:null,printIsbn:null,pdfIsbn:null,doi:null,price:0,priceEur:0,priceUsd:0,slug:null,numberOfPages:0,isOpenForSubmission:!1,hash:"900d78336110fda9e7f46f84187235ff",bookSignature:"",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/8074.jpg",keywords:null,numberOfDownloads:null,numberOfWosCitations:0,numberOfCrossrefCitations:0,numberOfDimensionsCitations:0,numberOfTotalCitations:0,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"April 24th 2018",dateEndSecondStepPublish:"August 29th 2018",dateEndThirdStepPublish:"October 28th 2018",dateEndFourthStepPublish:"January 16th 2019",dateEndFifthStepPublish:"March 17th 2019",remainingDaysToSecondStep:"2 years",secondStepPassed:!0,currentStepOfPublishingProcess:1,editedByType:null,kuFlag:!1,biosketch:null,coeditorOneBiosketch:null,coeditorTwoBiosketch:null,coeditorThreeBiosketch:null,coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"16",title:"Medicine",slug:"medicine"}],chapters:null,productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:null},relatedBooks:[{type:"book",id:"6550",title:"Cohort Studies in Health Sciences",subtitle:null,isOpenForSubmission:!1,hash:"01df5aba4fff1a84b37a2fdafa809660",slug:"cohort-studies-in-health-sciences",bookSignature:"R. Mauricio Barría",coverURL:"https://cdn.intechopen.com/books/images_new/6550.jpg",editedByType:"Edited by",editors:[{id:"88861",title:"Dr.",name:"René Mauricio",surname:"Barría",slug:"rene-mauricio-barria",fullName:"René Mauricio Barría"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"878",title:"Phytochemicals",subtitle:"A Global Perspective of Their Role in Nutrition and Health",isOpenForSubmission:!1,hash:"ec77671f63975ef2d16192897deb6835",slug:"phytochemicals-a-global-perspective-of-their-role-in-nutrition-and-health",bookSignature:"Venketeshwer Rao",coverURL:"https://cdn.intechopen.com/books/images_new/878.jpg",editedByType:"Edited by",editors:[{id:"82663",title:"Dr.",name:"Venketeshwer",surname:"Rao",slug:"venketeshwer-rao",fullName:"Venketeshwer Rao"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"4816",title:"Face Recognition",subtitle:null,isOpenForSubmission:!1,hash:"146063b5359146b7718ea86bad47c8eb",slug:"face_recognition",bookSignature:"Kresimir Delac and Mislav Grgic",coverURL:"https://cdn.intechopen.com/books/images_new/4816.jpg",editedByType:"Edited by",editors:[{id:"528",title:"Dr.",name:"Kresimir",surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"10586",title:"Object Localization Using Stereo Vision",doi:"10.5772/9276",slug:"object-localization-using-stereo-vision",body:null,keywords:null,chapterPDFUrl:"https://cdn.intechopen.com/pdfs/10586.pdf",chapterXML:null,downloadPdfUrl:"/chapter/pdf-download/10586",previewPdfUrl:"/chapter/pdf-preview/10586",totalDownloads:3172,totalViews:217,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,dateSubmitted:null,dateReviewed:null,datePrePublished:null,datePublished:"March 1st 2010",dateFinished:null,readingETA:"0",abstract:null,reviewType:"peer-reviewed",bibtexUrl:"/chapter/bibtex/10586",risUrl:"/chapter/ris/10586",book:{slug:"robot-localization-and-map-building"},signatures:"Sai Krishna Vuppala",authors:null,sections:null,chapterReferences:null,footnotes:null,contributors:null,corrections:null},book:{id:"3711",title:"Robot Localization and Map Building",subtitle:null,fullTitle:"Robot Localization and Map Building",slug:"robot-localization-and-map-building",publishedDate:"March 1st 2010",bookSignature:"Hanafiah Yussof",coverURL:"https://cdn.intechopen.com/books/images_new/3711.jpg",licenceType:"CC BY-NC-SA 3.0",editedByType:"Edited by",editors:[{id:"32065",title:"Dr.",name:"Hanafiah",middleName:null,surname:"Yussof",slug:"hanafiah-yussof",fullName:"Hanafiah Yussof"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"10563",title:"Visual Localisation of Quadruped Walking Robots",slug:"visual-localisation-of-quadruped-walking-robots",totalDownloads:2839,totalCrossrefCites:0,signatures:"Renato Samperio and Huosheng Hu",authors:[null]},{id:"10575",title:"Ranging Fusion for Accurating State of the Art Robot Localization",slug:"ranging-fusion-for-accurating-state-of-the-art-robot-localization",totalDownloads:2367,totalCrossrefCites:0,signatures:"Hamed Bastani and Hamid Mirmohammad-Sadeghi",authors:[null]},{id:"10565",title:"Basic Extended Kalman Filter – Simultaneous Localisation and Mapping",slug:"basic-extended-kalman-filter-simultaneous-localisation-and-mapping",totalDownloads:3748,totalCrossrefCites:1,signatures:"Oduetse Matsebe, Molaletsa Namoshe and Nkgatho Tlale",authors:[null]},{id:"10566",title:"Model based Kalman Filter Mobile Robot Self-Localization",slug:"model-based-kalman-filter-mobile-robot-self-localization",totalDownloads:4267,totalCrossrefCites:7,signatures:"Edouard Ivanjko, Andreja Kitanov and Ivan Petrovic",authors:[null]},{id:"10583",title:"Global Localization Based on a Rejection Differential Evolution Filter",slug:"global-localization-based-on-a-rejection-differential-evolution-filter",totalDownloads:1968,totalCrossrefCites:0,signatures:"M.L. Munoz, L. Moreno, D. Blanco and S. Garrido",authors:[null]},{id:"10577",title:"Reliable Localization Systems Including GNSS Bias Correction",slug:"reliable-localization-systems-including-gnss-bias-correction",totalDownloads:2715,totalCrossrefCites:0,signatures:"Pierre Delmas, Christophe Debain, Roland Chapuis and Cedric Tessier",authors:[null]},{id:"10570",title:"Evaluation of Aligning Methods for Landmark-Based Maps in Visual SLAM",slug:"evaluation-of-aligning-methods-for-landmark-based-maps-in-visual-slam",totalDownloads:1990,totalCrossrefCites:0,signatures:"Monica Ballesta, Oscar Reinoso, Arturo Gil, Luis Paya and Miguel Julia",authors:[null]},{id:"10574",title:"Key Elements for Motion Planning Algorithms",slug:"key-elements-for-motion-planning-algorithms",totalDownloads:1904,totalCrossrefCites:0,signatures:"Antonio Benitez, Ignacio Huitzil, Daniel Vallejo, Jorge de la Calleja and Ma. Auxilio Medina",authors:[null]},{id:"10572",title:"Optimum Biped Trajectory Planning for Humanoid Robot Navigation in Unseen Environment",slug:"optimum-biped-trajectory-planning-for-humanoid-robot-navigation-in-unseen-environment",totalDownloads:2410,totalCrossrefCites:0,signatures:"Hanafiah Yussof and Masahiro Ohka",authors:[null]},{id:"10568",title:"Multi-Robot Cooperative Sensin and Localization",slug:"multi-robot-cooperative-sensin-and-localization",totalDownloads:2359,totalCrossrefCites:0,signatures:"Kai-Tai Song, Chi-Yi Tsai and Cheng-Hsien Chiu Huang",authors:[null]},{id:"10562",title:"Filtering Algorithm for Reliable Localization of Mobile Robot in Multi-Sensor Environment",slug:"filtering-algorithm-for-reliable-localization-of-mobile-robot-in-multi-sensor-environment",totalDownloads:2123,totalCrossrefCites:0,signatures:"Yong-Shik Kim, Jae Hoon Lee, Bong Keun Kim, Hyun Min Do and Akihisa Ohya",authors:[null]},{id:"10576",title:"Consistent Map Building Based on Sensor Fusion for Indoor Service Robot",slug:"consistent-map-building-based-on-sensor-fusion-for-indoor-service-robot",totalDownloads:2250,totalCrossrefCites:0,signatures:"Ren C. Luo and Chun C. Lai",authors:[null]},{id:"10587",title:"Mobile Robot Localization and Map Building for a Nonholonomic Mobile Robot",slug:"mobile-robot-localization-and-map-building-for-a-nonholonomic-mobile-robot",totalDownloads:2775,totalCrossrefCites:0,signatures:"Songmin Jia and Akira Yasuda",authors:[null]},{id:"10579",title:"Robust Global Urban Localization Based on Road Maps",slug:"robust-global-urban-localization-based-on-road-maps",totalDownloads:2125,totalCrossrefCites:0,signatures:"Jose Guivant, Mark Whitty and Alicia Robledo",authors:[null]},{id:"10586",title:"Object Localization Using Stereo Vision",slug:"object-localization-using-stereo-vision",totalDownloads:3172,totalCrossrefCites:0,signatures:"Sai Krishna Vuppala",authors:[null]},{id:"10564",title:"Vision based Systems for Localization in Service Robots",slug:"vision-based-systems-for-localization-in-service-robots",totalDownloads:2205,totalCrossrefCites:0,signatures:"Paulraj M.P. and Hema C.R.",authors:[null]},{id:"10588",title:"Floor Texture Visual Servo Using Multiple Cameras for Mobile Robot Localization",slug:"floor-texture-visual-servo-using-multiple-cameras-for-mobile-robot-localization",totalDownloads:1871,totalCrossrefCites:0,signatures:"Takeshi Matsumoto, David Powers and Nasser Asgari",authors:[null]},{id:"10585",title:"Omni-Directional Vision Sensor for Mobile Robot Navigation Based on Particle Filter",slug:"omni-directional-vision-sensor-for-mobile-robot-navigation-based-on-particle-filter",totalDownloads:2747,totalCrossrefCites:0,signatures:"Zuoliang Cao, Yanbin Li and Shenghua Ye",authors:[null]},{id:"10584",title:"Visual Odometry and Mapping for Underwater Autonomous Vehicles",slug:"visual-odometry-and-mapping-for-underwater-autonomous-vehicles",totalDownloads:2534,totalCrossrefCites:2,signatures:"Silvia Botelho, Gabriel Oliveira, Paulo Drews, Monica Figueiredo and Celina Haffele",authors:[null]},{id:"10582",title:"A Daisy-Chaining Visual Servoing Approach with Applications in Tracking, Localization, and Mapping",slug:"a-daisy-chaining-visual-servoing-approach-with-applications-in-tracking-localization-and-mapping",totalDownloads:1853,totalCrossrefCites:0,signatures:"S. S. Mehta and W.E. Dixon",authors:[null]},{id:"10571",title:"Visual Based Localization of a Legged Robot with a Topological Representation",slug:"visual-based-localization-of-a-legged-robot-with-a-topological-representation",totalDownloads:1853,totalCrossrefCites:1,signatures:"Francisco Martin, Vicente Matellan, Jose Maria Canas and Carlos Aguero",authors:[null]},{id:"10578",title:"Mobile Robot Positioning Based on ZigBee Wireless Sensor Networks and Vision Sensor",slug:"mobile-robot-positioning-based-on-zigbee-wireless-sensor-networks-and-vision-sensor",totalDownloads:4951,totalCrossrefCites:2,signatures:"Wang Hongbo",authors:[null]},{id:"10569",title:"A WSNs-based Approach and System for Mobile Robot Navigation",slug:"a-wsns-based-approach-and-system-for-mobile-robot-navigation",totalDownloads:2260,totalCrossrefCites:0,signatures:"Huawei Liang, Tao Mei and Max Q.-H. Meng",authors:[null]},{id:"10580",title:"Real-Time Wireless Location and Tracking System with Motion Pattern Detection",slug:"real-time-wireless-location-and-tracking-system-with-motion-pattern-detection",totalDownloads:3370,totalCrossrefCites:3,signatures:"Pedro Abreu, Vasco Vinhas, Pedro Mendes, Luis Paulo Reis and Julio Garganta",authors:[null]},{id:"10567",title:"Sound Localization for Robot Navigation",slug:"sound-localization-for-robot-navigation",totalDownloads:3223,totalCrossrefCites:0,signatures:"Jie Huang",authors:[null]},{id:"10581",title:"Objects Localization and Differentiation Using Ultrasonic Sensors",slug:"objects-localization-and-differentiation-using-ultrasonic-sensors",totalDownloads:4056,totalCrossrefCites:4,signatures:"Bogdan Kreczmer",authors:[null]},{id:"10573",title:"Heading Measurements for Indoor Mobile Robots with Minimized Drift Using a MEMS Gyroscopes",slug:"heading-measurements-for-indoor-mobile-robots-with-minimized-drift-using-a-mems-gyroscopes",totalDownloads:3246,totalCrossrefCites:4,signatures:"Sung Kyung Hong and Young-sun Ryuh",authors:[null]},{id:"10589",title:"Methods for Wheel Slip and Sinkage Estimation in Mobile Robots",slug:"methods-for-wheel-slip-and-sinkage-estimation-in-mobile-robots",totalDownloads:3031,totalCrossrefCites:2,signatures:"Giulio Reina",authors:[null]}]},relatedBooks:[{type:"book",id:"5263",title:"Robot Control",subtitle:null,isOpenForSubmission:!1,hash:"b6ee44b867a4e27c8e3bae6016c4f698",slug:"robot-control",bookSignature:"Efren Gorrostieta Hurtado",coverURL:"https://cdn.intechopen.com/books/images_new/5263.jpg",editedByType:"Edited by",editors:[{id:"38850",title:"Dr.",name:"Efren",surname:"Gorrostieta Hurtado",slug:"efren-gorrostieta-hurtado",fullName:"Efren Gorrostieta Hurtado"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"51122",title:"A Review of Compliant Movement Primitives",slug:"a-review-of-compliant-movement-primitives",signatures:"Miha Deniša, Tadej Petrič, Andrej Gams and Aleš Ude",authors:[{id:"7205",title:"Dr.",name:"Ales",middleName:null,surname:"Ude",fullName:"Ales Ude",slug:"ales-ude"},{id:"67024",title:"Dr.",name:"Andrej",middleName:null,surname:"Gams",fullName:"Andrej Gams",slug:"andrej-gams"},{id:"70965",title:"Dr.",name:"Tadej",middleName:null,surname:"Petrič",fullName:"Tadej Petrič",slug:"tadej-petric"},{id:"171814",title:"MSc.",name:"Miha",middleName:null,surname:"Deniša",fullName:"Miha Deniša",slug:"miha-denisa"}]},{id:"51960",title:"Induced Force Hovering of Spherical Robot by Under-Actuated Control of Dual Rotor",slug:"induced-force-hovering-of-spherical-robot-by-under-actuated-control-of-dual-rotor",signatures:"G. Santos-Medina, K.Y. Heras-Gaytán, E.A. Martínez-García, R.\nTorres-Córdoba and V. Carrillo-Saucedo",authors:[{id:"84958",title:"Dr.",name:"Edgar",middleName:"Alonso",surname:"Martínez García",fullName:"Edgar Martínez García",slug:"edgar-martinez-garcia"},{id:"185784",title:"B.Sc.",name:"Gerson",middleName:null,surname:"Santos-Medina",fullName:"Gerson Santos-Medina",slug:"gerson-santos-medina"},{id:"185785",title:"BSc.",name:"Karla",middleName:null,surname:"Heras-Gaytan",fullName:"Karla Heras-Gaytan",slug:"karla-heras-gaytan"},{id:"185786",title:"Dr.",name:"Rafael",middleName:null,surname:"Torres-Córdoba",fullName:"Rafael Torres-Córdoba",slug:"rafael-torres-cordoba"},{id:"185787",title:"Dr.",name:"Victor",middleName:null,surname:"Carrillo-Saucedo",fullName:"Victor Carrillo-Saucedo",slug:"victor-carrillo-saucedo"}]},{id:"51927",title:"Adaptive Steering and Trajectory Control of Wheeled Mobile Robots for Autonomous Navigation",slug:"adaptive-steering-and-trajectory-control-of-wheeled-mobile-robots-for-autonomous-navigation",signatures:"Mariam Al-Sagban and Rached Dhaouadi",authors:[{id:"183057",title:"M.Sc.",name:"Mariam",middleName:null,surname:"Al-Sagban",fullName:"Mariam Al-Sagban",slug:"mariam-al-sagban"}]},{id:"51953",title:"Occupancy Map Construction for Indoor Robot Navigation",slug:"occupancy-map-construction-for-indoor-robot-navigation",signatures:"Dora-Luz Almanza-Ojeda, Yazmín Gomar-Vera and Mario-Alberto\nIbarra-Manzano",authors:[{id:"182765",title:"Dr.",name:"Dora Luz",middleName:null,surname:"Almanza Ojeda",fullName:"Dora Luz Almanza Ojeda",slug:"dora-luz-almanza-ojeda"},{id:"191782",title:"BSc.",name:"Yazmin",middleName:null,surname:"Gomar-Vera",fullName:"Yazmin Gomar-Vera",slug:"yazmin-gomar-vera"},{id:"191783",title:"Dr.",name:"Mario-Alberto",middleName:null,surname:"Ibarra-Manzano",fullName:"Mario-Alberto Ibarra-Manzano",slug:"mario-alberto-ibarra-manzano"}]},{id:"51635",title:"Analysis of a Sorter Cascade Applied to Control a Wheelchair",slug:"analysis-of-a-sorter-cascade-applied-to-control-a-wheelchair",signatures:"Marcos Figueredo, Alexandre Nascimento, Roberto L.S. Monteiro\nand Marcelo A. Moret",authors:[{id:"182667",title:"Dr.",name:"Marcos",middleName:"Batista",surname:"Figueredo",fullName:"Marcos Figueredo",slug:"marcos-figueredo"}]},{id:"52036",title:"Watch Your Step! Terrain Traversability for Robot Control",slug:"watch-your-step-terrain-traversability-for-robot-control",signatures:"Mauro Bellone",authors:[{id:"158265",title:"Dr.",name:"Mauro",middleName:null,surname:"Bellone",fullName:"Mauro Bellone",slug:"mauro-bellone"}]}]}]},onlineFirst:{chapter:{type:"chapter",id:"64040",title:"Fungal Growth and Aerosolization from Various Conditions and Materials",doi:"10.5772/intechopen.81565",slug:"fungal-growth-and-aerosolization-from-various-conditions-and-materials",body:'Fungal spores and fragments usually in the sub-micrometer size range can be released from contaminated materials into air, and if inhaled, may cause adverse health effects for people and animals [1, 2, 3]. There is increased interest in the role of aerosolized fungal spores and their submicrometer fragments in adverse effects considering the strong association between the numbers of fine particles and adverse health effects [4, 5, 6, 7]. Furthermore, fungal exposures are receiving increasing attention as an occupational and public health problem; this is due to the high prevalence of fungal contamination in buildings. Dampness and moisture-related problems are the main sources of fungal contaminations [8, 9] in homes and other domestic dwellings [10] as well as schools [11].
Fungal spores and fragments are one of the most common classes of airborne biological aerosols in many indoor environments and they form part of the complex community of indoor biological agents [12, 13, 14, 15, 16, 17]. Most of these particles are encountered in indoor environments where we spend about 90% of our time [18]. Because of this, it is important to determine the sources of these fungal spores and their fragments in such environments. Fungi from damp indoor environments are known to be one of the main causes of degradation of indoor air quality and can pose a serious health hazard to occupants [19, 20]. The submicrometer fragments are of utmost importance, because they tend to stay longer in air, and are easily inhaled. The smallest fragments (>0.1 μm) can deposit deep in the respiratory tract having the potential for causing adverse health effects [21, 22, 23]. Furthermore, the large surface area of the fragments relative to their mass may evoke high biological activity [22].
The high number of released fungal fragments in combination with their potential to deliver harmful antigens and mycotoxins to the alveolar region of the lung suggests the need for their characterization. Furthermore, the properties of spores and fragments released from fungal growth are dependent on the type of materials, the species of fungi, the cultivation time as well as the air volume passing over the growth. The characterization of fungal particles is important to help us understand the potential health effects associated with the exposure [21, 24]. Fungal spores are considered the most abundant fraction of these particles; they have an aerodynamic diameter (da) in the size range of 1–10 μm [25].
Indoor air, like outdoor air, has many sources of contaminants that affect health adversely. However, it is not clear which source is associated with the adverse health effects. As earlier explained, because we spend most of our time indoors, it is important to characterize fungal fragments based on their origin since this knowledge can improve our understanding of the potential adverse health effects associated with exposure to these particles.
It has been estimated that dampness and mold growth can be detected in most home as reviewed by Mudarri and Fisk [26] and have been associated with increases of 30–50% in several respiratory and asthma-related health outcomes [27]. Furthermore, approximately 8–18% of cases of acute bronchitis and 9–20% of respiratory infections are estimated to occur in environments contaminated with fungi [28].
The review of Samson et al. [29] claimed that floods, wet seasons, thermal modernization of residential buildings, air-conditioning systems, construction or material faults, and poor and improper ventilation are the major reasons for increase in the relative humidity and dampness of materials in the indoor environment. When moist conditions are prolonged in indoor environments, for example, when building materials stay damp for a long time, then the growth of microbes is promoted and there is an increased risk of microbial contamination [29, 30, 31]. In addition, certain characteristics of the home [32] as well as personal activities of its occupants [33] influence the microbial profile in indoor environments.
Generally, a wide range of fungal species may be encountered in the indoor air. For example, Zyska [34] surveyed the available literature and compiled a list of more than 200 fungal species present in air or growing on structural materials in indoor environments and therefore likely to contribute to the airborne fungal burden. Fungi in indoor environments can be inhaled and exposure via the airways is especially problematic. Furthermore, the presence of fungal particles has been linked to many diseases and symptoms among the occupants of moisture damage buildings [9, 19].
There are several sources of fungal particles in the indoor environment. This includes fungal particles exclusively generated from indoor sources and those that infiltrate from the outdoor environment as shown in Figure 1.
Schematic diagram showing the sources of fungal particles in the indoor environment [3]. Reproduced with permission from Yamamoto et al.
Fungi found indoors may be from different sources. However, the majority (70–80%) of indoor fungal aerosol and fugal allergens (80%) are generated in the indoor environment [3]. In a study by Adams et al. [35], they observed that fungal composition indoor was related to dispersal from the outdoor environment and are passively collected by indoor surfaces, although they rarely grow on the surfaces.
In addition to the above, the basic characteristics and parts of a building can also affect the emergence of fungi. Different researches including Despot and Klarić [36] and Toyinbo et al. [37] have associated buildings with basements with the emergence of indoor mold. This may be due to the high humidity and cold temperature in the building basement. The high humidity and/moisture content may occur from leaky pipes or cracks in the basement walls that allow ground water to penetrate the basement. Another source of moisture in the basement is flooding which makes water to move down to the basement and usually dry at a slow rate due to lack of adequate ventilation. This creates a favorable condition for fungal growth. The kitchen and bathroom sections of a building may also encourage the growth of fungi since these places have a high moisture content and substrates [38].
Outdoor generated indoor fungi enter a building through the ventilation system. This can be a mechanical ventilation system without adequate air filter for pollutants or through a naturally ventilated building with open windows and doors where outdoor to indoor ratio of pollutants can be close to unity. A ventilation system can also be a reservoir for indoor fungi especially when the ducts and filters are dirty with dust that serves as a substrate for fungi growth [39]. A DNA-based analysis of air handling unit filters by Luhung et al. [40] shows diverse genera of fungi, which includes Cladosporium, Aspergillus and Lentinus. Oil residues in ventilation ducts can also trap dusts and serves as a source of nutrients for fungal growth that can be transferred indoor through the ventilation system [39].
The health effects associated with fungal exposures may be caused by the fungi themselves, fungal mycotoxins, and fungal cell wall components or metabolically produced volatile compounds. The health effects can be categorized into three groups: (1) infections, which are caused mostly by the viable cells; (2) allergic reactions, which are usually caused by both viable and non-viable cells and components of the cell wall of the fungi if they carry antigens and (3) toxic responses, usually in response to the mycotoxins produced by the fungi.
Exposure to fungal particles has been linked to a range of adverse health effects [41]. For example, exposure to fungi has been associated with the onset of asthma in both infants and adults [42, 43, 44, 45, 46, 47].
There is convincing data in the literature suggesting an association between moisture damage in a building and the incidence of diseases such as new asthma cases, current asthma, respiratory infections, cough, allergic rhinitis, eczema and bronchitis [2, 42, 43, 46, 47, 48, 49]. In contrast, quantitative assessments have not detected any consistent associations between fungal measurements and adverse health effects. Nevertheless, limited or sufficient associations have been documented between the fungal concentration in dust by qPCR, cultured airborne fungi sampled from indoor air as well as several microbial compounds such as ergosterol, endotoxins and beta-glucans in dust and adverse health effects [50, 51, 52, 53]. There is credible scientific evidence to support the association between moisture damage, visible fungal growth measured indoors and adverse health effects. The World Health Organization (WHO) has stated that approximately 25% of residents in social housing stocks are prone to experience elevated health risks associated with their exposure to indoor molds.
Fungi are eukaryotic organisms that lack chlorophyll and obtain their nutrients from the growth media by the use of enzymes that they secrete. On the other hand, molds are filamentous fungi that grow with branched multi-cellular filamentous structures called mycelium [54]. In general, fungi are characterized by a visible vegetative body or a colony composed of a network of threadlike filaments which infiltrate the materials on which they feed. Fungi are usually saprophytic in nature; thus, they obtain nutrients from dead organic matter provided there is sufficient moisture. They can live off many of the materials present in the indoor environment such as wood, cellulose, insulations, wallpapers, glue and everyday dust and dirt [55, 56, 57]. Thus, fungi have the remarkable capability to degrade almost all natural and man-made materials [15, 58, 59] especially if they are hygroscopic [10, 60]. Fungi obtain nutrients by releasing extracellular enzymes and acids that break down the materials prior to their absorption. In the process, particles, including microbial degraded materials as well as gases, especially microbial volatile organic compounds (MVOCs), are released into the environment [61].
The MVOCs may form sub-micrometer particles through a process of secondary aerosol formation [61, 62]. These sub-micrometer particles have been shown to be aerosolized into the indoor environment following exposure to the effects of airflows and vibration [62, 63] Figure 2.
Schematic diagram showing the growth of fungi on a material surface with the subsequent release of particles of the fungal growth [64]. Reproduced with permission from Morse and acker.
Distinct characteristics of the growth material can play an important role in the creation and accumulation of moisture which eventually lead to mold growth on their surfaces [65, 66]. For example, when building are constructed with very good insulations in order to reduce heat loss and improve thermal performance, the several layers of insulation prevent easy movement of air in and through the building materials leading to accumulation of moisture within the building materials as well as the building. Consequently, the building becomes a microbiological reservoir and a contributor to the microbial exposure due to their ability to absorb and accumulate moisture [67].
Due to the heterogeneous nature of new buildings, there are varieties of materials that serve as micro-niches, that is, they have a favorable temperature, water activity (aw) and relative humidity (RH). For example, the surfaces of affected building materials (such as concrete and ceramic tiles in moist walls, ceiling tiles, dust laden wooden furniture) create specific niches suitable for the growth of microorganisms including bacteria and fungi. As expected, the climate within the building varies from one part of the indoor environment to the next. Thus, fungal growth would also be predicted to vary with the microclimate created. Moisture damage and dampness in buildings often affect a variety of structural components of building materials, leading to a deterioration of the indoor air quality.
Water-damaged building materials, particularly those rich in organic matter, can support microbial growth if they remain wet for a prolonged period of time [55, 59]. Under certain required conditions such as temperature, nutrient and pH conditions, microbial growth can occur within an hour [24]. Nonetheless, the principal limiting factor is the availability of moisture [55, 68]. It has been established that the lowest RH of a material at which fungi can grow is in a range around 75–80%, which corresponds to a water activity (aw) of 0.75–80 [55, 69, 70]. The moisture of the substrate that is available to the fungi for growth is the so-called free water and this amount is influenced by the relative humidity of the surrounding air. This does not include bound water that is a component of the chemistry of the substrate [24]. Moisture sources for fungal growth on materials indoors may be internal or external with moisture movement into and through building cavities by convection, gravity or capillary action.
Pasanen et al. [71] found that relative humidity values of 70–90% are required if there is to be fungal growth on building materials. Furthermore, the relative humidity required for growth depends on the particular material and the fungal species involved. Since most materials are porous in nature, adsorption of water into the materials first occurs via the pores before the material surface and become available to the microbes. Thus, porous materials support fungal growth when their RH is higher than 80% [68]. These conditions influence the extent of colonization and the types of fungi that will be present, since any changes in moisture availability will change also the composition of the microbial species present in that environment. For example, certain species of Penicillium, Erotium and Aspergillus grow in relatively dry environments with RH between 75 and 85% (e.g., in settled house dust on material surfaces with a relatively low RH). As RH increases, different species such as Basidiomycetes and Eratonium begin to grow, requiring continuously wet substrates such as soaked wallboard with RH range of 80–90%, while others like Fusarium, Cladosporium and Stachybotrys only grow at RH exceeding 90% [29, 70, 71, 72, 73].
In addition to humidity and water, fungi need adequate nutrition and temperatures to grow. The availability of nutrients depends on the composition of the building material. Building materials like wood and ceiling tiles are organic in nature; they contain complex polymers like starch, cellulose and lignin. These components are broken down by the extracellular enzymes of the fungi into simple sugars, amino acids and other simple nutrients [74, 75]. As fungi can utilize many complex polymers, a wide range of materials can act as nutrient sources.
Fungi can grow over a wide temperature range (5–39°C), [76]. However, at low temperatures (0–5°C), the fungal metabolic activities necessary for growth are slowed down, rendering the fungi dormant until an optimum temperature is reached [77]. At a higher temperature (34–36°C) the metabolic reaction rates increase and at temperatures above 46°C, the fungi become stressed and die [78]. This is because most of the activities of the fungi are dependent on DNA and enzymes. Due to the above, the concentration of fungi is usually high during the summer season as compared to winter season [79].
Fungal growth on building materials is dependent on the chemical composition of the materials [58]. The most susceptible materials to microbial growth and biodegradation are those with a natural organic composition, for example, wood and paper. These materials contain starch, cellulose and hemicellulose, pectin and lignin [74, 80, 81]. Based on these components, a wide variety of materials are potentially suitable for supporting fungal growth [15, 58, 59].
Buildings contain a wide variety of materials that affect the germination and growth rate of fungi [82]. Thus, each material serves as a niche for a specific microorganism, depending on the composition of the material, water activity and nutrient content [58, 83]. These properties of the building materials determine the diversity and extent of growth of the microbes [84, 85].
Wood remains the most extensively used material in buildings [81, 86]. Wood is able to absorb and retain water and moisture from both standing water and the environment [81, 87]. This characteristic in addition to the high nitrogen-bound compounds and low molecular carbohydrates that are transferred to the wood surface during processing mean that wood is very susceptible to fungal growth [87]. For example, a study by Meklin et al. [88] found school constructed with wood to have a higher concentration of fungi (5–950 cfu/m3) than those constructed with concrete (<2–5 to 500 cfu/m3). Although concrete is also hygroscopic, it has a low moisture permeability which reduces its rate of degradation and it contains very little or no nutrient for fungi growth [89]. Fungal species commonly found on moisture-damaged wood include Aspergillus versicolor, Penicillium brevicompactum, [81, 84, 85].
Gypsum board, on the other hand, is mostly used as the inner wall liners in buildings [90]. The paper liners used to reinforce the gypsum core makes gypsum board susceptible to fungal growth. Since the inner core (gypsum) is able to retain water and make it available to the surface paper lining, there can be a prolonged presence of water and moisture required to sustain fungal growth [10]. While the inner core (gypsum) may not be susceptible to fungal growth, the glue and paper serve as good media due to their organic nature [91]. The fungal species routinely found on gypsum board are the cellulolytic Stachybotrys chartarum [70] and Cladosporium cladosporioides [91].
Plastic materials are also becoming a common material used in buildings, as either sheets or pipes. As sheets, they are used as material envelopes, which insulate the building. Though plastics are known to be resistant to microbial attack because microbes do not possess any enzymes capable of degrading synthetic polymers [92], the addition of plasticizers can make the plastics susceptible to microbial growth [93]. These plasticizers are commonly organic acid esters such as dioctylphthalates (DOP) and dioctyladipate (DOA) which are added to the polyvinyl chloride (PVC) to modify the polymer’s physical or mechanical properties [93].
Glass fibers used in insulation materials do not support fungal growth. However, the glue used as binders does contain nutrients that may promote fungal growth [90] since these glues can be synthetic or plant-based. For example, the urea-based derivatives, polyurethanes, which are used as binders, are known to support fungal growth [94]. Plant-based binders are also used in binding certain building materials such as plywood, and ceiling tiles and may contain nutrients suitable to allow fungal growth.
All materials, both organic and inorganic, are able to sustain fungal life especially when the materials have dust, dirt or other deposits on their surface which represent sources of carbon and nitrogen [56, 57]. Dust is known to contain microorganisms, debris and other animal or insect parts that serve as nutrients for fungal growth [95]. Thus, more growth is observed on materials with dust on their surfaces compared to those without dust [56, 96]. Furthermore, settled dust or soil alters the water absorbing and retentive characteristics of the material surface, making the material surface continually moist, conditions in which fungi thrive [10]. Dust absorbs water from the atmosphere. It has been shown that dust competes with the material surface for moisture, with the dust holding more water due to its more hygroscopic nature. Therefore, dust may promote fungal growth even on materials that naturally would not support microbial growth [56, 57]. It is therefore important for indoor surfaces to be continually cleaned to avoid fungal growth and any health effect associated with it.
Forces such as turbulence, temperature, air velocity, vibration and zone of convection are usually associated with the release of fungal spores and hyphae from fungal colonies. In addition, factors such as the maturity of the colony, changes in temperature, relative humidity over the culture surface, light periods, nutritional composition of the substrate and the specific fungal species will determine the frequency and the number of spores that will be liberated and transported into the air at any given time. Furthermore, the dispersal of the fungal particles depends upon their size, shape, roughness, density, electrostatic charge, air movement and activities that influence the circulation of the air [24].
Release of fungal particles usually occurs by two mechanisms; active and passive release [68]. Active release refers to an adaptive type of particle aerosolization, via forces arising inside the fungi attributable to a burst of energy by a mechanism known as osmotic pressure and surface tension discharge [97]. Passive release occurs by energy originating from outside the fungi, such as mechanical disturbances of the fungal colonies by mechanical handling, vibration or air currents. The latter forces can also cause secondary release of settled spores from surfaces. Activities that have been shown to increase fungal spore concentrations in indoor air include daily activities such as vacuuming, sweeping, walking etc. [98, 99, 100, 101, 102, 103].
During fungal growth and sporulation, as well as when the culture is in a dormant phase, spores and bioactive agent containing fragments are released into the indoor environment [21, 61, 104, 105, 106, 107]. As mentioned earlier, hyphal fragments are of high importance since they make up about 6–56% of the total fungal particles based on microscopic sample analysis [108, 109]. Aerosolized fungal particles in chamber studies have shown that fungal fragments are released at levels up to 514 times higher than spores [21, 61, 106, 107, 110]. In other studies, Li and Kendrick [111] used microscopic counting and found that hyphal fragments accounted for only 6.3% of the total number of fungal particles in indoor environments. In addition, by applying a biomass determination, Adhikari et al. [112] detected lower amounts of β-N-acetylhexosaminidase (NAHA) enzyme in fungal fragments <1 μm compared to spores >1.8 μm.
Though both types of particles (spores and fragments) released from the fungal cultures during aerosolization are potentially harmful, the fragments are of greater importance since they tend to suspend longer in air than the spores [61, 62, 106, 107, 113]. They also have a tendency to penetrate deep into alveolar regions of the respiratory tract when inhaled [21, 114]. Cho et al. [21] have used a computer-based model to assess the deposition of spores and fragments of A. versicolor and S. chartarum in the respiratory tract. For both fungi, they found that the vast majority, 65–90%, of inhaled fungal spores deposited in the nasal and extra thoracic regions while only 3–15 and 2–5% of the spores deposited in the alveoli-interstitial and bronchial-bronchiolar regions, respectively. They also demonstrated that about 60% of fungal fragments deposited in the alveoli-interstitial region with 14–15% being trapped in the nasal and extrathoracic regions. It can therefore be deduced from the above modeling analysis that the different deposition efficiencies could have consequences on the potential adverse health effects induced by inhaled fungal particles of different sizes.
Fungal fragments have been shown to contain antigens [61, 62], allergens [5, 115, 116], mycotoxins [23, 117], and (1 → 3)-β-D-glucans [23, 52]. Their size in relation to their numbers and their biological properties all contribute to their potential to evoke adverse health effects. It is known from atmospheric studies investigating the adverse health effects of ultrafine particles that it is the number concentration rather than mass concentration which is important [118, 119].
Different fungal species have characteristic structures and thus behave differently when they become airborne. In addition, the growth substrate providing the nutrients for the fungi may also affect the properties of the spores and fragments and could contribute to fragments released from the biodegradation of the substrate itself during fungal metabolism. The amount of fungal particles released may also depend on the type of substrate and the conditions under which the fungi were grown. It is very important to evaluate spore properties under a variety of conditions in order to gain insights into the contribution these factors have on the adverse health effects produced by these particles.
One of the ways fungal particles are characterized is by their properties when they are released from contaminated materials. The particles released are affected by the growth substrate, fungal species, age of the culture and air velocity to which the cultures had been exposed [120]. The same factors affected the fragment/spore (F/S) ratios [121].
Biological particles are usually distinguished from non-biological particles by their ability to fluoresce when excited with photons at a certain wavelength. The fluorescence property is based on molecules such as tryptophan, tyrosine, or phenylalanine, reduced nicotinamide adenine dinucleotide (NADH), and nicotinamide adenine dinucleotide phosphate (NADPH) as well as riboflavins, flavin adenine dinucleotide (FADH) and flavin mononucleotide (FMN). Depending on the conditions under which the fungi grow, differences in fluorescence properties are observed. For example, spores obtained from cultures on building materials, such as, gypsum board, have been shown to have lower fluorescent properties than spores from agar. This indicates that cultures growing on nutrient poor substrates contain less compounds capable of fluorescence. Studies by Agranovski et al. [121] and Kanaani et al. [122] measuring fungal amounts from agar using fluorescence measuring devices in laboratory settings resulted in good detection efficiency of the instruments. However, the use of fluorescence properties may underestimate the concentration of fungal particles due to influences of nutrient availability on the growth of the fungi.
The type of species also affects the fluorescence properties. For example, lower fluorescent particle fraction (FPF) values have been observed for C. cladosporioides compared to A. versicolor and P. brevicompactum [120, 123]. The structure of the spore plays a major role in allowing devices to measure fluorescence properties. C. cladosporioides has a dark-skinned coating preventing impinging photons from penetrating to reach the exterior pigments to excite fluorescence from internal fluorescence. It can be deduced that C. cladosporioides concentrations may be underestimated in field measurements.
In recent study by Mensah-Attipoe et al. [121] and Afanou et al. [104], they observed that A. versicolor produced a higher F/S-ratio compared to C. cladosporioides and P. brevicompactum. The increased sub-micrometer fragments from A. versicolor can be attributed to the outer-wall spines, which are easily sheared away during sampling.
Studies have shown that the type of material and nutrient affects how much particles are released [120, 121]. For example, the fragment/spore ratio (F/S) for agar was higher compared to wood and gypsum board. Seo et al. [124] observed a higher F/S ratio for A. versicolor cultivated on agar than on gypsum board and ceiling tiles. Generally, higher concentrations of fungal particles are aerosolized from dry surfaces with low moisture contents than wet surfaces with high humidity [62]. Agar may have a different moisture content and moisture dynamics during the fungal growth than wood and gypsum board. During growth, the moisture content becomes reduced [23] and it is possible that agar loses more moisture than wood and gypsum. Therefore, fungal growth on agar undergoes desiccation stress and releases more fragment particles than when it grows on wood and gypsum board.
It has been observed that fragment/spore ratio (F/S) increases with increasing age of the culture. Moisture content of wood and gypsum increases with incubation time. Therefore, before aerosolization can yield enough particles, the material must be dried. With differences in the absorption and retention of moisture by the various materials, fungal biomass is also affected and hence affects the release dynamics of fungal particles from the material surfaces. Seo et al. [124] demonstrated that F/S increased with age. They attributed the increase in particle release from older cultures to changes in fungal biomass and moisture content. Dryness on the surface of the culture increases the aerosolization of fungal particles by reducing the adhesion forces between the fungal structures and making these structures more brittle [124]. Therefore, it has been concluded that with time, fungal growth in buildings may increase the contribution of sub-micrometer-sized fungal fragments to the overall mold exposure [124]. Spores aerosolized from older cultures displayed lower fluorescence than younger cultures. Kanaani et al. [125] reported a decrease in fluorescence emitted by Penicillium and Aspergillus from 2 days to 21 days. They suggested that fluorescent intensity of biomolecules such as nicotinamide-adenine dinucleotide phosphate NAD(P)H and surrogates of metabolic function such as riboflavin found in fungal spores may vary according to the environmental conditions under which the fungal colonies are growing and also on their concentration at a particular point in time. The decrease in fluorescence with age could also be due to changes in the fluorescent compounds as the culture ages.
Concentration of fungal spores and fragments has been shown to increase with increasing air velocity, but the F/S ratios decreased with increase in air velocity. A decrease in fluorescence per spore was observed when the air velocity was increased. It is also possible that as larger particles are carried along with the increased air currents in the sampling lines, they impact on the sides of the walls resulting in the breakage; as posited by Afanou et al. [104, 105].
Fragments have been proposed to be secondary organic aerosols formed from MVOCs released from fungal growths (secondary formation of aerosol particles) [61]. If fragment particles are formed by this mechanism in the presence of ozone, the concentration of fragments should decrease with higher flow rates due to their increased dilution. However, the opposite was observed by Mensah-Attipoe et al. [121], meaning that secondary aerosol formation may not be a relevant process for origin of fungal fragments. Instead, fragments are mainly formed through mechanical processes. It has been shown that fungal fragments are aerosolized at low air velocity [61]. Studies by Mensah-Attipoe et al. [121] show that fragments and spore concentrations increased with greater air velocities, however, the spore concentration increased more than the fragment concentration. This explains the decrease in F/S ratio when the air velocity is increased. A decrease in fluorescence in response to the increase in air velocity has been postulated to be due to a decrease in relative humidity of the culture causing desiccation stress to the fungal spores [125]. In addition, due to the increased air velocity, larger fungal hyphae are aerosolized together with spores due to increased stress and desiccation of the colony. The desiccation stress and decrease in fluorescence induced by increased air velocity has been attributed to a loss of spore viability [125].
The type of building material and fungal species affect the amount of growth measured on the contaminated surfaces. In addition, these factors together with air velocity and age of the culture affect the properties of the fungal particles aerosolized from fungal contaminated surfaces. The nutritional value, chemical composition and moisture requirements as well as sources of external nutrients potentially affect fungal growth.
Fluorescence property of the particles which is sometimes attributed to their viability decreases when fungi are grown on poor nutrient substrates, released from older cultures and released in the presence of high air velocities. Since a building has many different materials in its structure and varying airflows passing over different ages of the growths at any point in time, it is concluded that fungal viability and their ability to cause infections may vary under different conditions.
F/S ratios decrease with increasing air velocity while spore concentration increase. This suggests that the conditions under which individuals are exposed to fungal particles may be different. A fraction of the fragments could be derived from building materials due to biodegradation of substrates when they are subjected to fungal metabolism. Fragments aerosolized from building materials could represent a potential health hazard depending on the composition of the material.
The Open Access model is applied to all of our publications and is designed to eliminate subscriptions and pay-per-view fees. This approach ensures free, immediate access to full text versions of your research.
",metaTitle:"Open Access Publishing Fees",metaDescription:"Open Access Publishing Fees",metaKeywords:null,canonicalURL:"/page/OA-publishing-fees",contentRaw:'[{"type":"htmlEditorComponent","content":"As a gold Open Access publisher, an Open Access Publishing Fee is payable on acceptance following peer review of the manuscript. In return, we provide high quality publishing services and exclusive benefits for all contributors. IntechOpen is the trusted publishing partner of over 118,000 international scientists and researchers.
\\n\\nThe Open Access Publishing Fee (OAPF) is payable only after your full chapter, monograph or Compacts monograph is accepted for publication.
\\n\\nOAPF Publishing Options
\\n\\n*These prices do not include Value-Added Tax (VAT). Residents of European Union countries need to add VAT based on the specific rate in their country of residence. Institutions and companies registered as VAT taxable entities in their own EU member state will not pay VAT as long as provision of the VAT registration number is made during the application process. This is made possible by the EU reverse charge method.
\\n\\nServices included are:
\\n\\nSee our full list of services here.
\\n\\nWhat isn't covered by the Open Access Publishing Fee?
\\n\\nIf your manuscript:
\\n\\nYour Author Service Manager will inform you of any items not covered by the OAPF and provide exact information regarding those additional costs before proceeding.
\\n\\nOpen Access Funding
\\n\\nTo explore funding opportunities and learn more about how you can finance your IntechOpen publication, go to our Open Access Funding page. IntechOpen offers expert assistance to all of its Authors. We can support you in approaching funding bodies and institutions in relation to publishing fees by providing information about compliance with the Open Access policies of your funder or institution. We can also assist with communicating the benefits of Open Access in order to support and strengthen your funding request and provide personal guidance through your application process. You can contact us at oapf@intechopen.com for further details or assistance.
\\n\\nFor Authors who are still unable to obtain funding from their institutions or research funding bodies for individual projects, IntechOpen does offer the possibility of applying for a Waiver to offset some or all processing feed. Details regarding our Waiver Policy can be found here.
\\n\\nAdded Value of Publishing with IntechOpen
\\n\\nChoosing to publish with IntechOpen ensures the following benefits:
\\n\\nBenefits of Publishing with IntechOpen
\\n\\nAs a gold Open Access publisher, an Open Access Publishing Fee is payable on acceptance following peer review of the manuscript. In return, we provide high quality publishing services and exclusive benefits for all contributors. IntechOpen is the trusted publishing partner of over 118,000 international scientists and researchers.
\n\nThe Open Access Publishing Fee (OAPF) is payable only after your full chapter, monograph or Compacts monograph is accepted for publication.
\n\nOAPF Publishing Options
\n\n*These prices do not include Value-Added Tax (VAT). Residents of European Union countries need to add VAT based on the specific rate in their country of residence. Institutions and companies registered as VAT taxable entities in their own EU member state will not pay VAT as long as provision of the VAT registration number is made during the application process. This is made possible by the EU reverse charge method.
\n\nServices included are:
\n\nSee our full list of services here.
\n\nWhat isn't covered by the Open Access Publishing Fee?
\n\nIf your manuscript:
\n\nYour Author Service Manager will inform you of any items not covered by the OAPF and provide exact information regarding those additional costs before proceeding.
\n\nOpen Access Funding
\n\nTo explore funding opportunities and learn more about how you can finance your IntechOpen publication, go to our Open Access Funding page. IntechOpen offers expert assistance to all of its Authors. We can support you in approaching funding bodies and institutions in relation to publishing fees by providing information about compliance with the Open Access policies of your funder or institution. We can also assist with communicating the benefits of Open Access in order to support and strengthen your funding request and provide personal guidance through your application process. You can contact us at oapf@intechopen.com for further details or assistance.
\n\nFor Authors who are still unable to obtain funding from their institutions or research funding bodies for individual projects, IntechOpen does offer the possibility of applying for a Waiver to offset some or all processing feed. Details regarding our Waiver Policy can be found here.
\n\nAdded Value of Publishing with IntechOpen
\n\nChoosing to publish with IntechOpen ensures the following benefits:
\n\nBenefits of Publishing with IntechOpen
\n\n