Chapters authored
Synthesis, Processing, and Characterization of the Cobalt Alloys with Silicon Addition
The composition of the cobalt alloys contains only noncytotoxic elements (Cr, Si, and Mo) that ensure its biocompatibility, and consequently, the development and proliferation of cells at the implant/tissue interface. The cobalt alloy has an original composition with silicon addition and the proportion of the alloying elements was established so as to ensure a high biocompatibility and adequate physical-chemical characteristics for it to be used in various applications. Silicon is known to be a metal with a high biocompatibility; it can replace noble/non-noble metals in commercial alloys, thereby excluding the occurrence of any toxic corrosion products. We chose it as an alloying element because it confers good casting properties, has double role as hardener and oxidant, ensures an increase in the resistance to tear, and offers a proper fluidity in the liquid phase.
Part of the book: Cobalt
Aspects Regarding Thermal-Mechanical Fatigue of Shape Memory Alloys
This chapter presents advanced researches about the using of metallic alloys with shape memory properties in construction and exploitation of parts subjected to combined stress by thermal and mechanical fatigue during their functioning. The shape memory alloys (SMAs) have a series of properties much different from the usual metallic materials. Their main characteristic is recovery/returning from plastic deformation by heating, considering that in some cases at temperature changing, the shape modification is reversible. In the case of parts made from SMA, which work in conditions by thermal and mechanical stresses and temperature variations, the resistance evaluation at thermal and mechanical fatigue is absolutely necessary. Like researching domain, regarding thermal and mechanical fatigue behavior, it was selected the shape memory Cu-based alloy. The achieved researches, concerning methodology, investigation equipment, experimental results, allow evaluating and estimating the shape memory properties. Losing the shape memory properties of SMA, in requested conditions, namely amnesia, so to the calculation of fatigue resistance must be taken into account by this fundamental property. The expression of the fatigue state, through losing the memorizing capacity, represents a designing indicator, which ensures the guaranty of properties in fatigue conditions, through applying of fatigue cycles. To determine the fatigue resistance of SMA was necessary specific requests. The properties are guaranteed for a certain number of fatigue cycles. The experimental data, presented in this chapter, offer to scientists some information about the SMAs, Cu-based. These data can be used in designing and manufacturing of new parts for different devices.
Part of the book: Shape-Memory Materials