Composition of global MSW [8].
\\n\\n
More than half of the publishers listed alongside IntechOpen (18 out of 30) are Social Science and Humanities publishers. IntechOpen is an exception to this as a leader in not only Open Access content but Open Access content across all scientific disciplines, including Physical Sciences, Engineering and Technology, Health Sciences, Life Science, and Social Sciences and Humanities.
\\n\\nOur breakdown of titles published demonstrates this with 47% PET, 31% HS, 18% LS, and 4% SSH books published.
\\n\\n“Even though ItechOpen has shown the potential of sci-tech books using an OA approach,” other publishers “have shown little interest in OA books.”
\\n\\nAdditionally, each book published by IntechOpen contains original content and research findings.
\\n\\nWe are honored to be among such prestigious publishers and we hope to continue to spearhead that growth in our quest to promote Open Access as a true pioneer in OA book publishing.
\\n\\n\\n\\n
\\n"}]',published:!0,mainMedia:null},components:[{type:"htmlEditorComponent",content:'
Simba Information has released its Open Access Book Publishing 2020 - 2024 report and has again identified IntechOpen as the world’s largest Open Access book publisher by title count.
\n\nSimba Information is a leading provider for market intelligence and forecasts in the media and publishing industry. The report, published every year, provides an overview and financial outlook for the global professional e-book publishing market.
\n\nIntechOpen, De Gruyter, and Frontiers are the largest OA book publishers by title count, with IntechOpen coming in at first place with 5,101 OA books published, a good 1,782 titles ahead of the nearest competitor.
\n\nSince the first Open Access Book Publishing report published in 2016, IntechOpen has held the top stop each year.
\n\n\n\nMore than half of the publishers listed alongside IntechOpen (18 out of 30) are Social Science and Humanities publishers. IntechOpen is an exception to this as a leader in not only Open Access content but Open Access content across all scientific disciplines, including Physical Sciences, Engineering and Technology, Health Sciences, Life Science, and Social Sciences and Humanities.
\n\nOur breakdown of titles published demonstrates this with 47% PET, 31% HS, 18% LS, and 4% SSH books published.
\n\n“Even though ItechOpen has shown the potential of sci-tech books using an OA approach,” other publishers “have shown little interest in OA books.”
\n\nAdditionally, each book published by IntechOpen contains original content and research findings.
\n\nWe are honored to be among such prestigious publishers and we hope to continue to spearhead that growth in our quest to promote Open Access as a true pioneer in OA book publishing.
\n\n\n\n
\n'}],latestNews:[{slug:"intechopen-authors-included-in-the-highly-cited-researchers-list-for-2020-20210121",title:"IntechOpen Authors Included in the Highly Cited Researchers List for 2020"},{slug:"intechopen-maintains-position-as-the-world-s-largest-oa-book-publisher-20201218",title:"IntechOpen Maintains Position as the World’s Largest OA Book Publisher"},{slug:"all-intechopen-books-available-on-perlego-20201215",title:"All IntechOpen Books Available on Perlego"},{slug:"oiv-awards-recognizes-intechopen-s-editors-20201127",title:"OIV Awards Recognizes IntechOpen's Editors"},{slug:"intechopen-joins-crossref-s-initiative-for-open-abstracts-i4oa-to-boost-the-discovery-of-research-20201005",title:"IntechOpen joins Crossref's Initiative for Open Abstracts (I4OA) to Boost the Discovery of Research"},{slug:"intechopen-hits-milestone-5-000-open-access-books-published-20200908",title:"IntechOpen hits milestone: 5,000 Open Access books published!"},{slug:"intechopen-books-hosted-on-the-mathworks-book-program-20200819",title:"IntechOpen Books Hosted on the MathWorks Book Program"},{slug:"intechopen-s-chapter-awarded-the-guenther-von-pannewitz-preis-2020-20200715",title:"IntechOpen's Chapter Awarded the Günther-von-Pannewitz-Preis 2020"}]},book:{item:{type:"book",id:"7710",leadTitle:null,fullTitle:"Quality Management and Quality Control - New Trends and Developments",title:"Quality Management and Quality Control",subtitle:"New Trends and Developments",reviewType:"peer-reviewed",abstract:"Quality management (QM) practices are the basis for the successful implementation and maintenance of any QM system. Quality control (QC) is identified as a QM component. Therefore, QM effectiveness is dependent on the QC strategy. QC practice is more or less complex depending on the type of production. The book is focused on new trends and developments in QM and QC in several types of industries from a worldwide perspective. Its content has been organized into two sections and seven chapters written by well-recognized researchers worldwide. Several approaches are debated based on sample traceability, analytical method validation, required parameters, class of exponential regression-type estimators of the population means, determination of impurities, viewpoints, and case studies.",isbn:"978-1-78923-878-5",printIsbn:"978-1-78923-877-8",pdfIsbn:"978-1-83962-119-2",doi:"10.5772/intechopen.77523",price:119,priceEur:129,priceUsd:155,slug:"quality-management-and-quality-control-new-trends-and-developments",numberOfPages:144,isOpenForSubmission:!1,isInWos:null,hash:"226e5d555cafed8a4d1b410959863661",bookSignature:"Paulo Pereira and Sandra Xavier",publishedDate:"April 10th 2019",coverURL:"https://cdn.intechopen.com/books/images_new/7710.jpg",numberOfDownloads:5345,numberOfWosCitations:0,numberOfCrossrefCitations:2,numberOfDimensionsCitations:4,hasAltmetrics:1,numberOfTotalCitations:6,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"September 4th 2018",dateEndSecondStepPublish:"September 25th 2018",dateEndThirdStepPublish:"November 24th 2018",dateEndFourthStepPublish:"February 12th 2019",dateEndFifthStepPublish:"April 13th 2019",currentStepOfPublishingProcess:5,indexedIn:"1,2,3,4,5,6",editedByType:"Edited by",kuFlag:!1,editors:[{id:"178637",title:"Dr.",name:"Paulo António Rodrigues",middleName:null,surname:"Pereira",slug:"paulo-antonio-rodrigues-pereira",fullName:"Paulo António Rodrigues Pereira",profilePictureURL:"https://mts.intechopen.com/storage/users/178637/images/system/178637.jpeg",biography:"Dr. Pereira received his Ph.D. in Biotechnology from the Catholic University of Portugal. He has been recruited as a quality and laboratory expert for seminars and professional laboratory meetings throughout Europe, Africa, and South America.\r\n23+ years of experience in the medical laboratory, having held key scientific leadership roles:\r\n13+ years as a senior researcher\r\n8+ years as a consultant of a metrology laboratory based on ISO/IEC 17025 specifications and related standards\r\n17+ years as a consultant and auditor of quality management systems based on ISO 9001, ISO/IEC 17025, and ISO 15189 standards\r\n16+ years as a quality manager in the Portuguese Institute of Blood and Transplantation, including national coordination over 6+ years\r\n6+ years as a teacher of quality assurance\r\nDr. Pereira is the author of several peer-review scientific articles, indexed book chapters and indexed books' Editor. He serves as a member of several Editorial Boards.",institutionString:"Portuguese Institute of Blood and Transplantation",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"3",totalChapterViews:"0",totalEditedBooks:"1",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:{id:"264942",title:"Dr.",name:"Sandra Maria Miranda",middleName:null,surname:"Xavier Da Silva",slug:"sandra-maria-miranda-xavier-da-silva",fullName:"Sandra Maria Miranda Xavier Da Silva",profilePictureURL:"https://mts.intechopen.com/storage/users/264942/images/system/264942.jpg",biography:"Dr. Xavier received her Ph.D. in Nursing from the University of Lisbon, Portugal.\n22+ years professional experience in nursing\n12+ years of teaching in a university\n4+ years of professional practice as the Head of Nursing\n7+ years as a researcher in the Unit of Investigation and Development in Nursing (UI & DE), Higher School of Nursing of Lisbon, Portugal\nDr. Xavier is the author of several books’ chapter and scientific articles in indexed journals.\nShe serves as a reviewer of scientific and technical articles in indexed journals.\nShe is also a recognized speaker at various national and international meetings.\nShe is a member of juries for the attribution of academic degrees.\nShe is a member of several Scientific Commissions of various meetings.",institutionString:"Polytechnic Institute of Beja",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:null},coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"78",title:"Quality Management",slug:"business-management-and-economics-quality-management"}],chapters:[{id:"65214",title:"Quality Management Practices in Indian SMEs",doi:"10.5772/intechopen.83550",slug:"quality-management-practices-in-indian-smes",totalDownloads:467,totalCrossrefCites:1,totalDimensionsCites:1,signatures:"Ayon Chakraborty",downloadPdfUrl:"/chapter/pdf-download/65214",previewPdfUrl:"/chapter/pdf-preview/65214",authors:[{id:"277471",title:"Associate Prof.",name:"Ayon",surname:"Chakrab",slug:"ayon-chakrab",fullName:"Ayon Chakrab"}],corrections:null},{id:"65275",title:"Total Quality Management in a Resource-Starved Nation",doi:"10.5772/intechopen.82759",slug:"total-quality-management-in-a-resource-starved-nation",totalDownloads:422,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Martins Emeje, Kokonne Ekere, Olubunmi Olayemi, Christianah Isimi\nand Karniyus Gamaniel",downloadPdfUrl:"/chapter/pdf-download/65275",previewPdfUrl:"/chapter/pdf-preview/65275",authors:[{id:"94311",title:"Prof.",name:"Martins",surname:"Emeje",slug:"martins-emeje",fullName:"Martins Emeje"}],corrections:null},{id:"65978",title:"Sample Traceability in Toxicology",doi:"10.5772/intechopen.84866",slug:"sample-traceability-in-toxicology",totalDownloads:406,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Laura Börgel Aguilera and Melissa Schulthess",downloadPdfUrl:"/chapter/pdf-download/65978",previewPdfUrl:"/chapter/pdf-preview/65978",authors:[{id:"277601",title:"Prof.",name:"Laura",surname:"Börgel",slug:"laura-borgel",fullName:"Laura Börgel"},{id:"288979",title:"Ms.",name:"Melissa",surname:"Schulthess",slug:"melissa-schulthess",fullName:"Melissa Schulthess"}],corrections:null},{id:"65518",title:"Analytical Method Validation as the First Step in Drug Quality Control",doi:"10.5772/intechopen.82826",slug:"analytical-method-validation-as-the-first-step-in-drug-quality-control",totalDownloads:630,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Sigrid Mennickent and Marta de Diego",downloadPdfUrl:"/chapter/pdf-download/65518",previewPdfUrl:"/chapter/pdf-preview/65518",authors:[{id:"52160",title:"MSc",name:"Sigrid",surname:"Mennickent",slug:"sigrid-mennickent",fullName:"Sigrid Mennickent"},{id:"53986",title:"MSc.",name:"Marta",surname:"De Diego",slug:"marta-de-diego",fullName:"Marta De Diego"}],corrections:null},{id:"65074",title:"Quality in Testing Laboratories: A Real Case in a Spanish Fuel Laboratory",doi:"10.5772/intechopen.82995",slug:"quality-in-testing-laboratories-a-real-case-in-a-spanish-fuel-laboratory",totalDownloads:444,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Ma Mercedes del Coro Fernández-Feal, Luis R. Sánchez-Fernández\nand Blanca Sánchez-Fernández",downloadPdfUrl:"/chapter/pdf-download/65074",previewPdfUrl:"/chapter/pdf-preview/65074",authors:[{id:"188987",title:"Dr.",name:"Mª Mercedes Del Coro",surname:"Fernández-Feal",slug:"ma-mercedes-del-coro-fernandez-feal",fullName:"Mª Mercedes Del Coro Fernández-Feal"},{id:"194816",title:"Dr.",name:"Luis R.",surname:"Sánchez-Fernández",slug:"luis-r.-sanchez-fernandez",fullName:"Luis R. Sánchez-Fernández"},{id:"194821",title:"Dr.",name:"Blanca",surname:"Sánchez-Fernández",slug:"blanca-sanchez-fernandez",fullName:"Blanca Sánchez-Fernández"}],corrections:null},{id:"65066",title:"Determination of Essential Parameters for Quality Control in Fabrication of Piezoelectric Micropumps",doi:"10.5772/intechopen.82857",slug:"determination-of-essential-parameters-for-quality-control-in-fabrication-of-piezoelectric-micropumps",totalDownloads:351,totalCrossrefCites:0,totalDimensionsCites:0,signatures:"Matej Možek, Borut Pečar, Drago Resnik and Danilo Vrtačnik",downloadPdfUrl:"/chapter/pdf-download/65066",previewPdfUrl:"/chapter/pdf-preview/65066",authors:[{id:"18182",title:"Dr.",name:"Matej",surname:"Možek",slug:"matej-mozek",fullName:"Matej Možek"},{id:"22398",title:"Dr.",name:"Danilo",surname:"Vrtačnik",slug:"danilo-vrtacnik",fullName:"Danilo Vrtačnik"},{id:"22399",title:"Dr.",name:"Drago",surname:"Resnik",slug:"drago-resnik",fullName:"Drago Resnik"},{id:"22400",title:"BSc.",name:"Borut",surname:"Pečar",slug:"borut-pecar",fullName:"Borut Pečar"}],corrections:null},{id:"65419",title:"Determination of Impurities in Pharmaceuticals: Why and How?",doi:"10.5772/intechopen.83849",slug:"determination-of-impurities-in-pharmaceuticals-why-and-how-",totalDownloads:2625,totalCrossrefCites:1,totalDimensionsCites:3,signatures:"Kung-Tien Liu and Chien-Hsin Chen",downloadPdfUrl:"/chapter/pdf-download/65419",previewPdfUrl:"/chapter/pdf-preview/65419",authors:[{id:"36122",title:"PhD.",name:"Kung-Tien",surname:"Liu",slug:"kung-tien-liu",fullName:"Kung-Tien Liu"},{id:"153497",title:"Dr.",name:"Chien-Hsin",surname:"Chen",slug:"chien-hsin-chen",fullName:"Chien-Hsin Chen"}],corrections:null}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},relatedBooks:[{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"878",title:"Phytochemicals",subtitle:"A Global Perspective of Their Role in Nutrition and Health",isOpenForSubmission:!1,hash:"ec77671f63975ef2d16192897deb6835",slug:"phytochemicals-a-global-perspective-of-their-role-in-nutrition-and-health",bookSignature:"Venketeshwer Rao",coverURL:"https://cdn.intechopen.com/books/images_new/878.jpg",editedByType:"Edited by",editors:[{id:"82663",title:"Dr.",name:"Venketeshwer",surname:"Rao",slug:"venketeshwer-rao",fullName:"Venketeshwer Rao"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"4816",title:"Face Recognition",subtitle:null,isOpenForSubmission:!1,hash:"146063b5359146b7718ea86bad47c8eb",slug:"face_recognition",bookSignature:"Kresimir Delac and Mislav Grgic",coverURL:"https://cdn.intechopen.com/books/images_new/4816.jpg",editedByType:"Edited by",editors:[{id:"528",title:"Dr.",name:"Kresimir",surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3621",title:"Silver Nanoparticles",subtitle:null,isOpenForSubmission:!1,hash:null,slug:"silver-nanoparticles",bookSignature:"David Pozo Perez",coverURL:"https://cdn.intechopen.com/books/images_new/3621.jpg",editedByType:"Edited by",editors:[{id:"6667",title:"Dr.",name:"David",surname:"Pozo",slug:"david-pozo",fullName:"David Pozo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],ofsBooks:[]},correction:{item:{id:"65668",slug:"corrigendum-to-clinical-applications-of-mesenchymal-stromal-cells-mscs-in-orthopedic-diseases",title:"Corrigendum to: Clinical Applications of Mesenchymal Stromal Cells (MSCs) in Orthopedic Diseases",doi:null,correctionPDFUrl:"https://cdn.intechopen.com/pdfs/65668.pdf",downloadPdfUrl:"/chapter/pdf-download/65668",previewPdfUrl:"/chapter/pdf-preview/65668",totalDownloads:null,totalCrossrefCites:null,bibtexUrl:"/chapter/bibtex/65668",risUrl:"/chapter/ris/65668",chapter:{id:"61187",slug:"clinical-applications-of-mesenchymal-stromal-cells-mscs-in-orthopedic-diseases",signatures:"Jiazhao Yang, Shiyuan Fang, Lei Xu, Li Li, Kai Xie, Jinsen Lu, Hao\nWang, Xujin Wang and Lixin Kan",dateSubmitted:"December 5th 2017",dateReviewed:"March 29th 2018",datePrePublished:"November 5th 2018",datePublished:"January 23rd 2019",book:{id:"6658",title:"Stromal Cells",subtitle:"Structure, Function, and Therapeutic Implications",fullTitle:"Stromal Cells - Structure, Function, and Therapeutic Implications",slug:"stromal-cells-structure-function-and-therapeutic-implications",publishedDate:"January 23rd 2019",bookSignature:"Mani T. Valarmathi",coverURL:"https://cdn.intechopen.com/books/images_new/6658.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"69697",title:"Dr.",name:"Mani T.",middleName:null,surname:"Valarmathi",slug:"mani-t.-valarmathi",fullName:"Mani T. Valarmathi"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:null}},chapter:{id:"61187",slug:"clinical-applications-of-mesenchymal-stromal-cells-mscs-in-orthopedic-diseases",signatures:"Jiazhao Yang, Shiyuan Fang, Lei Xu, Li Li, Kai Xie, Jinsen Lu, Hao\nWang, Xujin Wang and Lixin Kan",dateSubmitted:"December 5th 2017",dateReviewed:"March 29th 2018",datePrePublished:"November 5th 2018",datePublished:"January 23rd 2019",book:{id:"6658",title:"Stromal Cells",subtitle:"Structure, Function, and Therapeutic Implications",fullTitle:"Stromal Cells - Structure, Function, and Therapeutic Implications",slug:"stromal-cells-structure-function-and-therapeutic-implications",publishedDate:"January 23rd 2019",bookSignature:"Mani T. Valarmathi",coverURL:"https://cdn.intechopen.com/books/images_new/6658.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"69697",title:"Dr.",name:"Mani T.",middleName:null,surname:"Valarmathi",slug:"mani-t.-valarmathi",fullName:"Mani T. Valarmathi"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:null},book:{id:"6658",title:"Stromal Cells",subtitle:"Structure, Function, and Therapeutic Implications",fullTitle:"Stromal Cells - Structure, Function, and Therapeutic Implications",slug:"stromal-cells-structure-function-and-therapeutic-implications",publishedDate:"January 23rd 2019",bookSignature:"Mani T. Valarmathi",coverURL:"https://cdn.intechopen.com/books/images_new/6658.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"69697",title:"Dr.",name:"Mani T.",middleName:null,surname:"Valarmathi",slug:"mani-t.-valarmathi",fullName:"Mani T. Valarmathi"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}}},ofsBook:{item:{type:"book",id:"6395",leadTitle:null,title:"Bridge Engineering",subtitle:null,reviewType:"peer-reviewed",abstract:"A bridge is a structure built to span the physical obstacles without closing the way underneath, such as a body of water, valley, or road, for the purpose of providing the passage over the obstacle. Bridge engineering is an engineering discipline branching from civil engineering that involves the planning, design, construction, operation, and maintenance of bridges to ensure safe and effective transportation of vehicles, people and goods. This book Bridge Engineering includes the main topics and the basic principles of bridge engineering and provides the full scope of current information necessary for effective and cost-conscious contemporary bridge. It reflects new engineering and building developments, the most current design methods, and the latest industry standards and policies. It provides a comprehensive overview of the significant characteristics for bridge engineering. It highlights the recent advancements, requirements, improvements, and details of the latest techniques in the global market. It contains a collection of the latest research developments on the bridge engineering. It comprehensively covers the basic theory and practice in sufficient depth to provide a solid grounding to bridge engineers. It helps readers to maximize effectiveness in all facets of bridge engineering. This professional book as a credible source and a valuable reference can be very applicable and useful for all professors, researchers, engineers, practicing professionals, trainee practitioners, students and others who are interested in the bridge projects.",isbn:"978-1-78923-105-2",printIsbn:"978-1-78923-104-5",pdfIsbn:"978-1-83881-451-9",doi:"10.5772/intechopen.70024",price:119,priceEur:129,priceUsd:155,slug:"bridge-engineering",numberOfPages:150,isOpenForSubmission:!1,hash:"1d5fcf0ef5708024ef95eb8b3d7310be",bookSignature:"Hamid Yaghoubi",publishedDate:"May 23rd 2018",coverURL:"https://cdn.intechopen.com/books/images_new/6395.jpg",keywords:null,numberOfDownloads:14036,numberOfWosCitations:0,numberOfCrossrefCitations:2,numberOfDimensionsCitations:2,numberOfTotalCitations:4,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"June 8th 2017",dateEndSecondStepPublish:"June 29th 2017",dateEndThirdStepPublish:"September 25th 2017",dateEndFourthStepPublish:"December 24th 2017",dateEndFifthStepPublish:"February 22nd 2018",remainingDaysToSecondStep:"4 years",secondStepPassed:!0,currentStepOfPublishingProcess:5,editedByType:"Edited by",kuFlag:!1,biosketch:null,coeditorOneBiosketch:null,coeditorTwoBiosketch:null,coeditorThreeBiosketch:null,coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:[{id:"103965",title:"Dr.",name:"Hamid",middleName:null,surname:"Yaghoubi",slug:"hamid-yaghoubi",fullName:"Hamid Yaghoubi",profilePictureURL:"https://mts.intechopen.com/storage/users/103965/images/system/103965.jpeg",biography:"Dr. Hamid Yaghoubi is the director of Iran Maglev Technology (IMT). He became the Iran top researcher in 2010. In this regard, he was awarded by the Iranian president; the Iranian Minister of Science, Research and Technology; and the Iranian Minister of Information and Communication Technology. He became the 2011 and 2012 Outstanding Reviewer for the Journal of Transportation Engineering (JTE), American Society of Civil Engineers (ASCE), USA. One of his journal papers became the 2011 Top Download Paper for JTE. He received the ICCTP2011 Award for the 11th International Conference of Chinese Transportation Professionals (ICCTP2011), ASCE. He is an assistant chief editor and an editorial board member for some journals. He has been a reviewer for the majority of journals, books and conferences. He has also been an editor for some books. He has cooperated with hundreds of international conferences as a chairman, a keynote speaker, a chair of session, a publication chair, and a member of committees, including scientific, organizing, steering, advisory, technical program, and so on. He is also a member of several international committees.",institutionString:"Iran Maglev Technology (IMT)",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"3",totalChapterViews:"0",totalEditedBooks:"4",institution:{name:"Iran University of Science and Technology",institutionURL:null,country:{name:"Iran"}}}],coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"705",title:"Construction Engineering",slug:"construction-engineering"}],chapters:[{id:"59387",title:"Introductory Chapter: Modern Bridges",slug:"introductory-chapter-modern-bridges",totalDownloads:569,totalCrossrefCites:0,authors:[{id:"103965",title:"Dr.",name:"Hamid",surname:"Yaghoubi",slug:"hamid-yaghoubi",fullName:"Hamid Yaghoubi"}]},{id:"60236",title:"The Feasibility of Constructing Super-Long-Span Bridges with New Materials in 2050",slug:"the-feasibility-of-constructing-super-long-span-bridges-with-new-materials-in-2050",totalDownloads:1008,totalCrossrefCites:1,authors:[{id:"211659",title:"Dr.",name:"Faham",surname:"Tahmasebinia",slug:"faham-tahmasebinia",fullName:"Faham Tahmasebinia"},{id:"221172",title:"Dr.",name:"Samad M.E.",surname:"Sepasgozar",slug:"samad-m.e.-sepasgozar",fullName:"Samad M.E. Sepasgozar"}]},{id:"57609",title:"Developing a Bridge Condition Rating Model Based on Limited Number of Data Sets",slug:"developing-a-bridge-condition-rating-model-based-on-limited-number-of-data-sets",totalDownloads:530,totalCrossrefCites:1,authors:[{id:"180233",title:"Associate Prof.",name:"Roszilah",surname:"Hamid",slug:"roszilah-hamid",fullName:"Roszilah Hamid"},{id:"216888",title:"Dr.",name:"Khairullah",surname:"Yusof",slug:"khairullah-yusof",fullName:"Khairullah Yusof"}]},{id:"57516",title:"Structural Identification (St-Id) Concept for Performance Prediction of Long-Span Bridges",slug:"structural-identification-st-id-concept-for-performance-prediction-of-long-span-bridges",totalDownloads:660,totalCrossrefCites:0,authors:[{id:"213939",title:"Dr.",name:"Selcuk",surname:"Bas",slug:"selcuk-bas",fullName:"Selcuk Bas"}]},{id:"58008",title:"Recent Advances in the Serviceability Assessment of Footbridges Under Pedestrian-Induced Vibrations",slug:"recent-advances-in-the-serviceability-assessment-of-footbridges-under-pedestrian-induced-vibrations",totalDownloads:578,totalCrossrefCites:0,authors:[{id:"215797",title:"Ph.D.",name:"Javier Fernando",surname:"Jiménez-Alonso",slug:"javier-fernando-jimenez-alonso",fullName:"Javier Fernando Jiménez-Alonso"},{id:"215798",title:"Prof.",name:"Andres",surname:"Saez",slug:"andres-saez",fullName:"Andres Saez"}]},{id:"58853",title:"Wind Action Phenomena Associated with Large-Span Bridges",slug:"wind-action-phenomena-associated-with-large-span-bridges",totalDownloads:9452,totalCrossrefCites:0,authors:[{id:"60072",title:"Prof.",name:"Raquel",surname:"Almeida",slug:"raquel-almeida",fullName:"Raquel Almeida"},{id:"216824",title:"Prof.",name:"Daniel",surname:"Vaz",slug:"daniel-vaz",fullName:"Daniel Vaz"},{id:"216827",title:"Prof.",name:"A.R.",surname:"Janeiro Borges",slug:"a.r.-janeiro-borges",fullName:"A.R. Janeiro Borges"}]},{id:"59297",title:"Bridges Subjected to Dynamic Loading",slug:"bridges-subjected-to-dynamic-loading",totalDownloads:1239,totalCrossrefCites:0,authors:[{id:"216765",title:"Prof.",name:"Ján",surname:"Benčat",slug:"jan-bencat",fullName:"Ján Benčat"},{id:"235614",title:"Associate Prof.",name:"Robert",surname:"Kohar",slug:"robert-kohar",fullName:"Robert Kohar"}]}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"185543",firstName:"Maja",lastName:"Bozicevic",middleName:null,title:"Ms.",imageUrl:"https://mts.intechopen.com/storage/users/185543/images/4748_n.jpeg",email:"maja.b@intechopen.com",biography:"As an Author Service Manager my responsibilities include monitoring and facilitating all publishing activities for authors and editors. From chapter submission and review, to approval and revision, copyediting and design, until final publication, I work closely with authors and editors to ensure a simple and easy publishing process. I maintain constant and effective communication with authors, editors and reviewers, which allows for a level of personal support that enables contributors to fully commit and concentrate on the chapters they are writing, editing, or reviewing. I assist authors in the preparation of their full chapter submissions and track important deadlines and ensure they are met. I help to coordinate internal processes such as linguistic review, and monitor the technical aspects of the process. As an ASM I am also involved in the acquisition of editors. Whether that be identifying an exceptional author and proposing an editorship collaboration, or contacting researchers who would like the opportunity to work with IntechOpen, I establish and help manage author and editor acquisition and contact."}},relatedBooks:[{type:"book",id:"5423",title:"Urban Transport Systems",subtitle:null,isOpenForSubmission:!1,hash:"222b5d90a7014dbff7e33f3dcde6bc1d",slug:"urban-transport-systems",bookSignature:"Hamid Yaghoubi",coverURL:"https://cdn.intechopen.com/books/images_new/5423.jpg",editedByType:"Edited by",editors:[{id:"103965",title:"Dr.",name:"Hamid",surname:"Yaghoubi",slug:"hamid-yaghoubi",fullName:"Hamid Yaghoubi"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6103",title:"Highway Engineering",subtitle:null,isOpenForSubmission:!1,hash:"9c66d18cec90a84fdfd9a64451dc421a",slug:"highway-engineering",bookSignature:"Hamid Yaghoubi",coverURL:"https://cdn.intechopen.com/books/images_new/6103.jpg",editedByType:"Edited by",editors:[{id:"103965",title:"Dr.",name:"Hamid",surname:"Yaghoubi",slug:"hamid-yaghoubi",fullName:"Hamid Yaghoubi"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7524",title:"High-Speed Rail",subtitle:null,isOpenForSubmission:!1,hash:"0e248745ed8a460687701d02462cb874",slug:"high-speed-rail",bookSignature:"Hamid Yaghoubi",coverURL:"https://cdn.intechopen.com/books/images_new/7524.jpg",editedByType:"Edited by",editors:[{id:"103965",title:"Dr.",name:"Hamid",surname:"Yaghoubi",slug:"hamid-yaghoubi",fullName:"Hamid Yaghoubi"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3631",title:"Smart Home Systems",subtitle:null,isOpenForSubmission:!1,hash:null,slug:"smart-home-systems",bookSignature:"Mahmoud A. Al-Qutayri",coverURL:"https://cdn.intechopen.com/books/images_new/3631.jpg",editedByType:"Edited by",editors:[{id:"7571",title:"Dr.",name:"Mahmoud",surname:"Al-Qutayri",slug:"mahmoud-al-qutayri",fullName:"Mahmoud Al-Qutayri"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"2005",title:"Effective Thermal Insulation",subtitle:"The Operative Factor of a Passive Building Model",isOpenForSubmission:!1,hash:"c7c6c5a9dfad00a32efaa72b9f163e71",slug:"effective-thermal-insulation-the-operative-factor-of-a-passive-building-model",bookSignature:"Amjad Almusaed",coverURL:"https://cdn.intechopen.com/books/images_new/2005.jpg",editedByType:"Edited by",editors:[{id:"110471",title:"Dr.",name:"Amjad",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7205",title:"Housing",subtitle:null,isOpenForSubmission:!1,hash:"efb431be41bf8bf41facd7b4a183225e",slug:"housing",bookSignature:"Amjad Almusaed and Asaad Almssad",coverURL:"https://cdn.intechopen.com/books/images_new/7205.jpg",editedByType:"Edited by",editors:[{id:"110471",title:"Dr.",name:"Amjad",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5422",title:"Risk Management Treatise for Engineering Practitioners",subtitle:null,isOpenForSubmission:!1,hash:"4d70d3197f1b4dea5285a83550a79ade",slug:"risk-management-treatise-for-engineering-practitioners",bookSignature:"Chike F Oduoza",coverURL:"https://cdn.intechopen.com/books/images_new/5422.jpg",editedByType:"Edited by",editors:[{id:"5932",title:"Dr.",name:"Chike",surname:"Oduoza",slug:"chike-oduoza",fullName:"Chike Oduoza"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8299",title:"Timber Buildings and Sustainability",subtitle:null,isOpenForSubmission:!1,hash:"bccf2891cec38ed041724131aa34c25a",slug:"timber-buildings-and-sustainability",bookSignature:"Giovanna Concu",coverURL:"https://cdn.intechopen.com/books/images_new/8299.jpg",editedByType:"Edited by",editors:[{id:"108709",title:"Dr.",name:"Giovanna",surname:"Concu",slug:"giovanna-concu",fullName:"Giovanna Concu"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8808",title:"Risk Management in Construction Projects",subtitle:null,isOpenForSubmission:!1,hash:"f8f1673caa5c51349ef131c89d02f873",slug:"risk-management-in-construction-projects",bookSignature:"Nthatisi Khatleli",coverURL:"https://cdn.intechopen.com/books/images_new/8808.jpg",editedByType:"Edited by",editors:[{id:"247856",title:"Dr.",name:"Nthatisi",surname:"Khatleli",slug:"nthatisi-khatleli",fullName:"Nthatisi Khatleli"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7473",title:"Indoor Environmental Quality",subtitle:null,isOpenForSubmission:!1,hash:"fb35168f3d84a1a6ee93cb3797ecda97",slug:"indoor-environmental-quality",bookSignature:"Muhammad Abdul Mujeebu",coverURL:"https://cdn.intechopen.com/books/images_new/7473.jpg",editedByType:"Edited by",editors:[{id:"289697",title:"Dr.",name:"Muhammad Abdul",surname:"Mujeebu",slug:"muhammad-abdul-mujeebu",fullName:"Muhammad Abdul Mujeebu"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"4594",title:"A Hybrid GA-TS Technique with Dynamic Operators and its Application to Channel Equalization and Fiber Tracking",doi:"10.5772/5596",slug:"a_hybrid_ga-ts_technique_with_dynamic_operators_and_its_application_to_channel_equalization_and_fibe",body:null,keywords:null,chapterPDFUrl:"https://cdn.intechopen.com/pdfs/4594.pdf",chapterXML:null,downloadPdfUrl:"/chapter/pdf-download/4594",previewPdfUrl:"/chapter/pdf-preview/4594",totalDownloads:1536,totalViews:90,totalCrossrefCites:3,totalDimensionsCites:3,hasAltmetrics:0,dateSubmitted:null,dateReviewed:null,datePrePublished:null,datePublished:"September 1st 2008",dateFinished:null,readingETA:"0",abstract:null,reviewType:"peer-reviewed",bibtexUrl:"/chapter/bibtex/4594",risUrl:"/chapter/ris/4594",book:{slug:"tabu_search"},signatures:"Luis M. San José-Revuelta",authors:null,sections:null,chapterReferences:null,footnotes:null,contributors:null,corrections:null},book:{id:"6114",title:"Tabu Search",subtitle:null,fullTitle:"Tabu Search",slug:"tabu_search",publishedDate:"September 1st 2008",bookSignature:"Wassim Jaziri",coverURL:"https://cdn.intechopen.com/books/images_new/6114.jpg",licenceType:"CC BY-NC-SA 3.0",editedByType:"Edited by",editors:[{id:"132091",title:"Prof.",name:"Jaziri",middleName:null,surname:"Wassim",slug:"jaziri-wassim",fullName:"Jaziri Wassim"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"4589",title:"Tabu Search: A Comparative Study",slug:"tabu_search__a_comparative_study",totalDownloads:6560,totalCrossrefCites:8,signatures:"Harun Pirim, Engin Bayraktar and Burak Eksioglu",authors:[null]},{id:"4590",title:"A Multiobjective Tabu Framework for the Optimization and Evaluation of Wireless Systems",slug:"a_multiobjective_tabu_framework_for_the_optimization_and_evaluation_of_wireless_systems",totalDownloads:1527,totalCrossrefCites:1,signatures:"Katia Jaffrès-Runser, Jean-Marie Gorce, and Cristina Comaniciu",authors:[null]},{id:"4591",title:"SOS-Heuristic for Intelligent Exploration of Search Space in CSOP",slug:"sos-heuristic_for_intelligent_exploration_of_search_space_in_csop",totalDownloads:1543,totalCrossrefCites:0,signatures:"Jaziri Wassim",authors:[null]},{id:"4592",title:"Symbiotic Tabu Search",slug:"symbiotic_tabu_search",totalDownloads:1804,totalCrossrefCites:0,signatures:"Ramin Halavati and Saeed Bagheri Shouraki",authors:[null]},{id:"4593",title:"Tabu Search and Hybrid Genetic Algorithms for Quadratic Assignment Problems",slug:"tabu_search_and_hybrid_genetic_algorithms_for_quadratic_assignment_problems",totalDownloads:3161,totalCrossrefCites:5,signatures:"Zvi Drezner",authors:[null]},{id:"4594",title:"A Hybrid GA-TS Technique with Dynamic Operators and its Application to Channel Equalization and Fiber Tracking",slug:"a_hybrid_ga-ts_technique_with_dynamic_operators_and_its_application_to_channel_equalization_and_fibe",totalDownloads:1536,totalCrossrefCites:3,signatures:"Luis M. San José-Revuelta",authors:[null]},{id:"4595",title:"Hybrid Tabu Algorithm for the Synthesis and Fabrication of Fiber Bragg Gratings",slug:"hybrid_tabu_algorithm_for_the_synthesis_and_fabrication_of_fiber_bragg_gratings",totalDownloads:1698,totalCrossrefCites:0,signatures:"Nam Quoc Ngo and Ruitao Zheng",authors:[null]},{id:"4596",title:"Some New Results on Tabu Search Algorithm Applied to the Job-Shop Scheduling Problem",slug:"some_new_results_on_tabu_search_algorithm_applied_to_the_job-shop_scheduling_problem",totalDownloads:2847,totalCrossrefCites:1,signatures:"Chaoyong Zhang, Xinyu Shao, Yunqing Rao and Haobo Qiu",authors:[null]},{id:"4597",title:"Tabu Search Experience in Forest Management and Planning",slug:"tabu_search_experience_in_forest_management_and_planning",totalDownloads:2044,totalCrossrefCites:0,signatures:"Pete Bettinger",authors:[null]},{id:"4598",title:"Feature Selection Using Intensified Tabu Search for Supervised Classification",slug:"feature_selection_using_intensified_tabu_search_for_supervised_classification",totalDownloads:2588,totalCrossrefCites:0,signatures:"Muhammad Atif Tahir and Jim Smith",authors:[null]},{id:"4599",title:"Hybrid Tabu Search for Re-Entrant Permutation Flow-Shop Scheduling Problem",slug:"hybrid_tabu_search_for_re-entrant_permutation_flow-shop_scheduling_problem",totalDownloads:1810,totalCrossrefCites:3,signatures:"Jen-Shiang Chen, Jason Chao-Hsien Pan and Chien-Kuang Wu",authors:[null]},{id:"4600",title:"On the Design of Large-Scale Cellular Mobile Networks Using Tabu Search",slug:"on_the_design_of_large-scale_cellular_mobile_networks_using_tabu_search",totalDownloads:1924,totalCrossrefCites:0,signatures:"Alejandro Quintero and Samuel Pierre",authors:[null]},{id:"4601",title:"Multiple Tabu Search Algorithm for Solving the Topology Network Design",slug:"multiple_tabu_search_algorithm_for_solving_the_topology_network_design",totalDownloads:2251,totalCrossrefCites:0,signatures:"Kanyapat Watcharasitthiwat, Saravuth Pothiya and Paramote Wardkein",authors:[null]},{id:"4602",title:"Hybrid Approaches Tabu Learning Algorithm Based Neural Network",slug:"hybrid_approaches_tabu_learning_algorithm_based_neural_network",totalDownloads:1605,totalCrossrefCites:0,signatures:"Junfei Qiao, Jian Ye and Honggui Han",authors:[null]}]},relatedBooks:[{type:"book",id:"14",title:"Traveling Salesman Problem",subtitle:"Theory and Applications",isOpenForSubmission:!1,hash:null,slug:"traveling-salesman-problem-theory-and-applications",bookSignature:"Donald Davendra",coverURL:"https://cdn.intechopen.com/books/images_new/14.jpg",editedByType:"Edited by",editors:[{id:"2961",title:"Prof.",name:"Donald",surname:"Davendra",slug:"donald-davendra",fullName:"Donald Davendra"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"12736",title:"Traveling Salesman Problem: an Overview of Applications, Formulations, and Solution Approaches",slug:"traveling-salesman-problem-an-overview-of-applications-formulations-and-solution-approaches",signatures:"Rajesh Matai, Surya Singh and Murari Lal Mittal",authors:[{id:"13446",title:"Prof.",name:"Surya",middleName:"Prakash",surname:"Singh",fullName:"Surya Singh",slug:"surya-singh"},{id:"23587",title:"Dr.",name:"Murari Lal",middleName:null,surname:"Mittal",fullName:"Murari Lal Mittal",slug:"murari-lal-mittal"},{id:"23588",title:"Dr.",name:"Rajesh",middleName:null,surname:"Matai",fullName:"Rajesh Matai",slug:"rajesh-matai"}]},{id:"12401",title:"The Advantage of Intelligent Algorithms for TSP",slug:"the-advantage-of-intelligent-algorithms-for-tsp",signatures:"Yuan-bin Mo",authors:[{id:"13425",title:"Dr.",name:"Yuan-bin",middleName:null,surname:"Mo",fullName:"Yuan-bin Mo",slug:"yuan-bin-mo"}]},{id:"12402",title:"Privacy-Preserving Local Search for the Traveling Salesman Problem",slug:"privacy-preserving-local-search-for-the-traveling-salesman-problem",signatures:"Jun Sakuma and Shigenobu Kobayashi",authors:[{id:"13496",title:"Dr.",name:"Jun",middleName:null,surname:"Sakuma",fullName:"Jun Sakuma",slug:"jun-sakuma"},{id:"13503",title:"Prof.",name:"Shigenobu",middleName:null,surname:"Kobayashi",fullName:"Shigenobu Kobayashi",slug:"shigenobu-kobayashi"}]},{id:"12403",title:"Chaos Driven Evolutionary Algorithm for the Traveling Salesman Problem",slug:"chaos-driven-evolutionary-algorithm-for-the-traveling-salesman-problem",signatures:"Ivan Zelinka, Roman Senkerik, Magdalena Bialic-Davendra and Donald Davendra",authors:[{id:"2961",title:"Prof.",name:"Donald",middleName:null,surname:"Davendra",fullName:"Donald Davendra",slug:"donald-davendra"},{id:"10213",title:"Dr.",name:"Ivan",middleName:null,surname:"Zelinka",fullName:"Ivan Zelinka",slug:"ivan-zelinka"},{id:"14637",title:"Dr.",name:"Roman",middleName:null,surname:"Senkerik",fullName:"Roman Senkerik",slug:"roman-senkerik"},{id:"14638",title:"Dr.",name:"Magdalena",middleName:null,surname:"Bialic-Davendra",fullName:"Magdalena Bialic-Davendra",slug:"magdalena-bialic-davendra"}]},{id:"12404",title:"A Fast Evolutionary Algorithm for Traveling Salesman Problem",slug:"a-fast-evolutionary-algorithm-for-traveling-salesman-problem",signatures:"Xuesong Yan, Qinghua Wu and Hui Li",authors:[{id:"13316",title:"Dr.",name:"Xuesong",middleName:null,surname:"Yan",fullName:"Xuesong Yan",slug:"xuesong-yan"}]},{id:"12405",title:"Immune-Genetic Algorithm for Traveling Salesman Problem",slug:"immune-genetic-algorithm-for-traveling-salesman-problem",signatures:"Jingui Lu and Min Xie",authors:[{id:"13508",title:"Prof.",name:"Jingui",middleName:null,surname:"Lu",fullName:"Jingui Lu",slug:"jingui-lu"},{id:"14286",title:"Dr.",name:"Min",middleName:null,surname:"Xie",fullName:"Min Xie",slug:"min-xie"}]},{id:"12406",title:"The Method of Solving for Traveling Salesman Problem Using Genetic Algorithm with Immune Adjustment Mechanism",slug:"the-method-of-solving-for-traveling-salesman-problem-using-genetic-algorithm-with-immune-adjustment-",signatures:"Hirotaka Itoh",authors:[{id:"14380",title:"Dr.",name:"Hirotaka",middleName:null,surname:"Itoh",fullName:"Hirotaka Itoh",slug:"hirotaka-itoh"}]},{id:"12407",title:"High Performance Immune Clonal Algorithm for Solving Large Scale TSP",slug:"high-performance-immune-clonal-algorithm-for-solving-large-scale-tsp",signatures:"Fang Liu, Yutao Qi, Jingjing Ma, Maoguo Gong, Ronghua Shang, Yangyang Li and Licheng Jiao",authors:[{id:"13712",title:"Dr.",name:"Yutao",middleName:null,surname:"Qi",fullName:"Yutao Qi",slug:"yutao-qi"},{id:"14343",title:"Prof.",name:"Fang",middleName:null,surname:"Liu",fullName:"Fang Liu",slug:"fang-liu"},{id:"14344",title:"Dr.",name:"Jingjing",middleName:null,surname:"Ma",fullName:"Jingjing Ma",slug:"jingjing-ma"},{id:"14345",title:"Dr.",name:"Maoguo",middleName:null,surname:"Gong",fullName:"Maoguo Gong",slug:"maoguo-gong"},{id:"14346",title:"Dr.",name:"Ronghua",middleName:null,surname:"Shang",fullName:"Ronghua Shang",slug:"ronghua-shang"},{id:"14347",title:"Dr.",name:"Yangyang",middleName:null,surname:"Li",fullName:"Yangyang Li",slug:"yangyang-li"},{id:"14348",title:"Prof.",name:"Licheng",middleName:null,surname:"Jiao",fullName:"Licheng Jiao",slug:"licheng-jiao"}]},{id:"12408",title:"A Multi-World Genetic Algorithm to Optimize Delivery Problem with Interactive-Time",slug:"a-multi-world-genetic-algorithm-to-optimize-delivery-problem-with-interactive-time",signatures:"Setsuo Tsuruta and Yoshitaka Sakurai",authors:[{id:"13355",title:"Dr.",name:"Yoshitaka",middleName:null,surname:"Sakurai",fullName:"Yoshitaka Sakurai",slug:"yoshitaka-sakurai"},{id:"14462",title:"Prof.",name:"Setsuo",middleName:null,surname:"Tsuruta",fullName:"Setsuo Tsuruta",slug:"setsuo-tsuruta"}]},{id:"12409",title:"An Efficient Solving the Travelling Salesman Problem : Global Optimization of Neural Networks by Using Hybrid Method",slug:"an-efficient-solving-the-travelling-salesman-problem-global-optimization-of-neural-networks-by-using",signatures:"Yong-hyun Cho",authors:[{id:"13327",title:"Prof.",name:"Yong-Hyun",middleName:null,surname:"Cho",fullName:"Yong-Hyun Cho",slug:"yong-hyun-cho"}]},{id:"12410",title:"Recurrent Neural Networks with the Soft 'Winner Takes All' Principle Applied to the Traveling Salesman Problem",slug:"recurrent-neural-networks-with-the-soft-winner-takes-all-principle-applied-to-the-traveling-salesman",signatures:"Paulo Siqueira, Maria Teresinha Arns Steiner and Sérgio Scheer",authors:[{id:"3191",title:"Dr.",name:"Paulo",middleName:"Henrique",surname:"Siqueira",fullName:"Paulo Siqueira",slug:"paulo-siqueira"},{id:"13770",title:"Dr.",name:"Maria Teresinha",middleName:null,surname:"Arns Steiner",fullName:"Maria Teresinha Arns Steiner",slug:"maria-teresinha-arns-steiner"},{id:"14317",title:"Prof.",name:"Sérgio",middleName:null,surname:"Scheer",fullName:"Sérgio Scheer",slug:"sergio-scheer"}]},{id:"12411",title:"A Study of Traveling Salesman Problem Using Fuzzy Self Organizing Map",slug:"a-study-of-traveling-salesman-problem-using-fuzzy-self-organizing-map",signatures:"Kajal De and Arindam Chaudhuri",authors:[{id:"13511",title:"Dr.",name:"Arindam",middleName:null,surname:"Chaudhuri",fullName:"Arindam Chaudhuri",slug:"arindam-chaudhuri"},{id:"14349",title:"Dr.",name:"Kajal",middleName:null,surname:"De",fullName:"Kajal De",slug:"kajal-de"}]},{id:"12412",title:"Hybrid Metaheuristics Using Reinforcement Learning Applied to Salesman Traveling Problem",slug:"hybrid-metaheuristics-using-reinforcement-learning-applied-to-salesman-traveling-problem-",signatures:"Francisco Chagas De Lima Júnior, Adriao Duarte Doria Neto and Jorge Dantas De Melo",authors:[{id:"14460",title:"Dr.",name:"Francisco",middleName:"Chagas",surname:"De Lima Junior",fullName:"Francisco De Lima Junior",slug:"francisco-de-lima-junior"},{id:"14469",title:"Dr.",name:"Jorge",middleName:null,surname:"Dantas de Melo",fullName:"Jorge Dantas de Melo",slug:"jorge-dantas-de-melo"},{id:"23716",title:"Dr.",name:"Adriao",middleName:null,surname:"Duarte Doria Neto",fullName:"Adriao Duarte Doria Neto",slug:"adriao-duarte-doria-neto"}]},{id:"12413",title:"Predicting Parallel TSP Performance: a Computational Approach",slug:"predicting-parallel-tsp-performance-a-computational-approach",signatures:"Dolores Rexachs, Emilio Luque and Paula Cecilia Fritzsche",authors:[{id:"13424",title:"Mrs.",name:"Paula Cecilia",middleName:null,surname:"Fritzsche",fullName:"Paula Cecilia Fritzsche",slug:"paula-cecilia-fritzsche"},{id:"13619",title:"Prof.",name:"Emilio",middleName:null,surname:"Luque",fullName:"Emilio Luque",slug:"emilio-luque"},{id:"14383",title:"Prof.",name:"Dolores",middleName:null,surname:"Rexachs",fullName:"Dolores Rexachs",slug:"dolores-rexachs"}]},{id:"12414",title:"Linear Programming Formulation of the Multi-Depot Multiple Traveling Salesman Problem with Differentiated Travel Costs",slug:"linear-programming-formulation-of-the-multi-depot-multiple-traveling-salesman-problem-with-different",signatures:"Moustapha Diaby",authors:[{id:"13467",title:"Dr.",name:"Moustapha",middleName:null,surname:"Diaby",fullName:"Moustapha Diaby",slug:"moustapha-diaby"}]},{id:"12415",title:"A Sociophysical Application of TSP: the Corporate Vote",slug:"a-sociophysical-application-of-tsp-the-corporate-vote-",signatures:"Hugo Hernandez-Saldana",authors:[{id:"13479",title:"Dr.",name:"Hugo",middleName:null,surname:"Hernandez-Saldana",fullName:"Hugo Hernandez-Saldana",slug:"hugo-hernandez-saldana"}]},{id:"12416",title:"Some Special Traveling Salesman Problems with Applications in Health Economics",slug:"some-special-traveling-salesman-problems-with-applications-in-health-economics",signatures:"Liana Lupsa, Ioana Chiorean, Radu Lupsa and Luciana Neamtiu",authors:[{id:"14115",title:"Prof.",name:"Liana",middleName:null,surname:"Lupsa",fullName:"Liana Lupsa",slug:"liana-lupsa"}]}]}]},onlineFirst:{chapter:{type:"chapter",id:"62390",title:"Municipal Solid Waste Management and Energy Recovery",doi:"10.5772/intechopen.79235",slug:"municipal-solid-waste-management-and-energy-recovery",body:'\n
With the growth of world population and progressive increase in living standards, the consumption of goods and energy has also increased, along with land use change and deforestation, intensified agricultural practices, industrialization and energy use from fossil fuel sources. All of these have contributed to ever-increasing concentrations of greenhouse gases in the atmosphere, since the industrial era.
\nMunicipal solid waste (MSW) is a manifestation of the unsustainable consumption of natural resources by humankind, which has led to—and continues to—the depletion of natural capital and environmental degradation.
\nCurrent global MSW generation levels are approximately 1.3 billion tons/year, and by 2025, these are expected to increase to approximately 2.2 billion tons/year. This represents a significant increase in per capita waste generation rates, from 1.20 to 1.42 kg per person per day, in the next 15 years (2018–2033). However, global averages are broad estimates only, as rates vary considerably by region, country, and even within cities [1].
\nOn a global scale, 70% of MSW is landfilled, 19% is recycled, and only 11% is utilized in Waste-to-Energy (WtE) schemes—this occurs due to logistical and economic issues—such as primary fossil energy scarcity and landfill volume restrictions [2].
\nThe concept of circular economy (CE)—while not entirely new—has recently gained importance in the agendas of policymakers, to address the aforementioned and other sustainability issues [3]. The aim of CE is to maintain the value of products, materials and resources as long as possible, to minimize the use of resources; in other words, CE is based on a “win-win” philosophy that states that prosper economy and healthy environment can co-exist [4].
\nWtE plants have a dual objective: reduce the amount of waste sent to landfills and produce useful energy (heat and/or power). The WtE supply chain provides a method for simultaneously addressing issues related to energy demand, waste management and emission of greenhouse gases (GHG), achieving a circular economy system (CES) [5].
\nTraditionally, WtE has been associated with incineration. Yet, the term is much broader, embracing several waste treatment processes that generate energy (electricity and/or heat), such as pyrolysis, conventional or plasma arc gasification, as well as nonthermal processes such as anaerobic digestion and landfill-gas recovery.
\nMunicipal solid waste (MSW), also referred to as trash or garbage, consists of several items that are discarded after use, such as grass clippings, furniture, clothing, food scraps, product packaging, bottles, newspapers, appliances, paint, and batteries [6]. Construction, industrial, and hazardous waste are not considered MSW.
\nIn recent decades, there has been increasing pressure on developed countries to reduce their waste associated with single-use discarded materials. The objective is to conserve natural resources, including energy (which is utilized for the production of such materials), and reduce the amount of materials disposed in sanitary landfills. The philosophy of waste management aims at decreasing the amount of waste generated by society and incentivizing reutilization and recovery of its energy content, when reutilization or recycling is not possible through biochemical or thermochemical technological routes.
\nFigure 1 presents a scheme based on the pyramid proposed by the European Commission. Different management strategies are ranked from most to least environmentally preferred.
\nWaste hierarchy, adapted from [7].
Most WtE transformation processes require pre-treatment of MSW. The characteristics of the raw materials within solid waste are affected by several factors, which range from the storage method (influence of humidity), maturity (wide variety of waste within an excavated landfill), classification policies (which vary depending on the country), to name a few. Successful implementation of WtE conversion technologies depends considerably on the efficiency of the process, which, in turn, depends on the quality of the waste considered. Table 1 presents the global average composition of MSW.
\nComponent | \nFraction (%) | \n
---|---|
Organic | \n46 | \n
Metal | \n4 | \n
Plastic | \n10 | \n
Paper | \n17 | \n
Other | \n18 | \n
Composition of global MSW [8].
The recovery of energy and materials from MSW through the production of a refuse derived fuel (RDF) is one of the alternatives advocated by waste management planners and government regulations [9]. RDF is the product of processing MSW to separate the noncombustible from the combustible portion, enabling better reuse of materials and recycling of MSW, with the possibility of achieving higher efficiencies in energy recovery treatments. RDF is an efficient fuel with several advantages in comparison with MSW, due to its high calorific value, more homogeneous chemical composition, more convenient storage and handling characteristics, and less carbon emissions.
\nSome studies have characterized the streams of materials involved in the RDF production process [9, 10], with descriptions on the characteristics of RDF in terms of composition and proximate and ultimate analysis [11, 12]. Also, the energy potential of RDF obtained from combustible solid waste has been evaluated by [13, 14].
\nTable 2 shows data compiled by [15] for the elemental composition of MSW and RDF.
\n\n | \n | MSW | \nRDF | \nRDF processed from landfill waste | \n
---|---|---|---|---|
Water content | \nwt% wet | \n34.2 [31.0–38.5] | \n10.8 [2.9–38.7] | \n14.4 [12–35.4] | \n
Volatiles | \nwt% dafa | \n87.1 [87.1] | \n88.5 [74.6–99.4] | \n80.4 | \n
Ash | \nwt% dry | \n33.4 [16.6–44.2] | \n15.8 [7.8–34.5] | \n27.1 | \n
Net calorific value | \nMJ/kg daf | \n18.7 [12.1–22.5] | \n22.6 [1.1–29.3] | \n22 | \n
C | \nwt% daf | \n49.5 [33.9–56.8] | \n54.6 [42.5–68.7] | \n54.9 | \n
H | \nwt% daf | \n5.60 [1.72–8.46] | \n8.37 [5.84–15.16] | \n7.38 | \n
O | \nwt% daf | \n32.4 [22.4–38.5] | \n34.4 [15.8–43.7] | \nNAb | \n
N | \nwt% daf | \n1.33 [0.70–1.95] | \n0.91 [0.22–2.37] | \n2.03 | \n
S | \nwt% daf | \n0.51 [0.22–1.40] | \n0.41 [0.01–1.27] | \n0.36 | \n
The direct utilization of MSW in processes for the recovery of energy can lead to variable operation conditions, even unstable, with quality fluctuations in the final product. This is a consequence of the heterogeneity of the material regarding size, shape and composition. This is why firstly fuel is derived from waste, which is then utilized in the energy generation system [16]. For gasification and pyrolysis technologies, pretreatment is a fundamental requirement, which does not occur when considering plasma gasification and incineration.
\nWith the objective of improving the handling characteristics and homogeneity of the material, the conversion process of MSW into fuels is constituted by different steps: trituration, sifting, selection, drying and/or pelletization. The least expensive and most well-established current practice to produce RDF from MSW is mechanical pretreatment (MT); however, different schemes can be used, as presented by [17].
\nThe characteristics of waste are important when selecting a specific WtE technology. The energy recovery efficiency depends on variables such as technology and quality of waste. An optimized plant that treats preselected waste can recover two or three times more electricity and heat than a more traditional plant that treats raw waste [18].
\nThere is a wide range of WtE technologies, biochemical and thermochemical, for the conversion of solid waste into energy (steam or electricity). Fuels such hydrogen, natural gas, synthetic diesel and ethanol can be utilized [19, 20].
\nThe biochemical route, in the case of MSW, refers to anaerobic digestion, which consists of controlled decomposition by microbes to reduce the organic material. Biochemical processes are used in the treatment of waste with high percentages of biodegradable organic matter and high moisture content. Methane, fuel for electricity generation, steam and heat can be produced.
\nOne of the disadvantages of the biological treatment is the preprocessing required to separate MSW. Biochemical conversion of waste can be grouped into four categories: anaerobic digestion/fermentation, aerobic digestion, composting, and landfill gas power (LFG). These technologies are the most economic and environmentally safe means of obtaining energy from MSW [21].
\nIn thermochemical conversion, both biodegradable and nonbiodegradable matters contribute to the energy output. Incineration, gasification and pyrolysis are types of thermochemical conversion processes, which are fundamental and necessary components of a comprehensive and integral urban solid waste management system [22].
\nThe main advantages of thermochemical processes include lower masses and volumes of waste, decrease in the space occupied by landfills, destruction of organic pollutants such as halogenated hydrocarbons, and decrease in the emission of GHGs due to anaerobic decomposition. When considering the life cycle, the use of waste as a source of energy generates less environmental impacts than other conventional energy sources.
\nWith incineration, the energy value of waste can be recovered; however, pyrolysis and gasification can be utilized to recover the chemical value of waste. The derived chemical products, in some cases, can be utilized as inputs in other processes or as secondary fuels.
\nWith the conversion of MSW into fuels, higher calorific values are obtained along with more homogeneous physical and chemical compositions, lower levels of pollutants and ashes, less excess air required for combustion, and better conditions for storage, handling, and transportation. Therefore, it is recommended to establish a balance between increasing production costs and the potential reduction of costs associated with designing and operating the system. Figure 2 shows thermochemical conversion processes, the products involved, and energy and material recovery systems.
\nThermochemical conversion processes and products, adapted from [23].
In the next topic, the main aspects of each of the mentioned routes will be analyzed.
\nWaste incineration is a specific treatment that reduces the volume of waste and its level of dangerousness, selecting and concentrating, or destroying the potentially harmful substances. Incineration processes can also offer the possibility of recovering the energy, mineral or chemical content of waste.
\nDuring recent decades, most industrialized countries with high population densities have employed incineration as an alternative procedure to controlled landfilling, for the treatment of MSW.
\nAccording to Ref. [24], the two main processes applied for the thermal treatment of waste are fluidized bed combustion and grate combustion. Another technological alternative is the rotary furnace or rotary kiln frequently employed in the field of waste treatment, for the combustion of hazardous waste in combination with other devices for gasification and pyrolysis [25].
\nGrate combustion, also known as mass burn combustion, is by far the most utilized, as it can handle larger items and only oversized materials have to be crushed. Fluidized bed combustion (as well as most pyrolysis and gasification processes) requires the waste to be shredded into small particles before being introduced in the combustion (pyrolysis/gasification) chamber [24].
\nThe calorific value of the material to be incinerated and the polluting potential of the emissions generated are the main reasons for the evolution of incineration systems (higher combustion efficiencies and effective removal of contaminants).
\nDue to the heterogeneous nature of waste, some differences with respect to conventional fossil fuel power plants have to be considered in the energy conversion process. The efficiency of a coal burning cycle is generally around 40%, while the efficiency of a garbage incineration cycle varies between 20 and 25%, if operating in a cogeneration mode, and up to 25–35% in the case of power production only [8, 26, 27, 28]. In general, fuel quality (i.e., waste) and other technical conditions (e.g., plant size, low temperature sources, etc.) limit the electrical efficiency of incinerators. This means that more than 70–80% of the heat generated by waste combustion is rejected to the environment.
\nThe conversion efficiency of steam energy into electricity increases with higher steam temperatures and pressures. However, when increasing steam temperature, the heat transfer surfaces are submitted to severe high-temperature corrosion, caused by metal chlorides in the ash particles deposited on the gas tubes and by high concentrations of chlorine and sulfur in MSW. Most chlorines are present in plastics (e.g., PVC), while fluorines are present in polytetrafluoroethylene (PTEF), along with other inorganic compounds. Corrosion limits steam properties to maximums of 450–500°C and 4.0–6.0 MPa, while the steam temperature can reach 600°C in a coal cycle [27, 29].
\nHCl is highly corrosive at high (>450°C) and low (<110°C) temperatures. The heating surfaces of radiant parts are protected by a resistant refractory material and/or welded high-alloy to prevent corrosive attacks in the furnace of the boiler system. The feed water should be preheated to a minimum of 125°C, before being sent to the boiler, to prevent low-temperature corrosion [29].
\nBeyond corrosion problems, another negative aspect related to WtE plants is represented by erosion, especially the abrasion of surface material responsible for the vertical wear and tear. This is primarily caused by the ash particles present in flue-gas, and erosion appears mostly in the area of gas redirection. Tube wear is caused by a combination of corrosion and abrasion.
\nThe pollutants released with exhaust gases after the burning of the waste affect the efficiency of the boiler. In an MSW incineration plant, efficiency is influenced by the heat lost with exhaust gases and by corrosion, which means that the temperature of exhaust gases cannot be significantly changed. For this reason, until 2013, the maximum efficiency of a boiler was approximately 87% [30].
\nThe incineration of MSW emits GHG such as carbon dioxide (CO2), methane (CH4), nitric oxide (N2O), hydrofluorocarbons (HFCs), polyfluorocarbons (PFCs), and sulfur hexafluoride (SF). When the furnace is maintained under high oxidizable conditions, there is no CH4 being emitted in the gases exiting the chimney. When primary air is supplied from the storage tank, CH4 is oxidized to CO2 and H2O.
\nThe pollutants emitted during incineration hinder the improvement of the steam cycle, but new technologies developed for the recovery of energy have managed to improve the overall efficiency of the plant. Some of the factors that have contributed the most to the improvement of new plants include two-second increase in residence time for dioxin destruction, high performance with mobile grills, utilization of new metal alloys and high-performance exhaust gas cleaning systems [31].
\nMost recent data from the Eurostat database highlight that municipal waste was treated differently in the EU 28 in 2014: 16.1% is composted (Eurostat shows it as biological treatment), 27.3% is incinerated (total incineration including energy recovery), 28.2% is recycled and 28.4% is landfilled [32].
\nJapan has 1172 incinerators for the treatment of 80% of MSW; approximately 71% of MSW is incinerated with energy recovery generating 1770 MW [33]. In the United States, there are 77 WtE power plants, of which 78% employ mass burn technology (60 facilities), 17% refuse derived fuel (13 facilities), and 4% utilize modular combustion (4 facilities). Of these facilities, 77% produce electricity (59 units), 4% export steam (3 units), and 19% cogeneration—or combined heat and power (15 units) [32].
\nLFG power represents one of the most readily available, cheap and relatively simple forms of WtE options. However, the carbon dioxide emissions from landfills per ton of MSW processed are at least 1.2 t CO2, much higher than WtE plants. Considering all environmental performance criteria (energy, material, and land consumption, air and water emissions, risks), WtE is the most favorable solution [24].
\nGasification is the thermal conversion of carbon-based material into a mixture of combustible gases, called syngas. Gasification is used to convert solid materials such as coal, coke, biomass and solid waste into a gas, with average composition 15–30% CO, 12–40% H, and 4.5–9% CH4. The lower heating value (LHV) of syngas is between 4 and 13 MJ/Nm3, depending on the oxidizing agent used in gasification, operating conditions, among other factors [34]. From the syngas gas produced, different chemical intermediate products can be obtained, with different industrial uses. Energy can also be obtained, in the form of power, heat or biofuel. Gasification temperature is one of the most important operation parameters that affects the performance of the process, due to the balance between endothermic and exothermic reactions involved.
\nRef. [35] compared different thermochemical conversion processes, and verified that gasification technology is the best choice considering energy and environmental perspectives. Gasification has attracted attention and gained importance in recent years, presenting higher energy efficiency and being friendlier to the environment.
\nOne of the challenges of MSW gasification is the characteristics of MSW, with variable size and moisture content, and highly variable on calorific value [36].
\nThe gasification of MSW is an effective technique to reduce the amount of waste, and is relatively faster than the conventional processes (more residues can be treated in less time). The process of integrated gasification and combustion emits dioxin and furan within acceptable limits established by national and international agencies [37].
\nAlthough gasification has been employed for over 200 years, gasification of MSW is still in its early development stages. Some companies are developing smaller, compact gasifiers designed to be used by cities, towns, and military bases. Companies engaged in waste gasification and the characteristics of gasification plants can be consulted in the Global Syngas Technologies Council Database (GSTC) [38].
\nPlasma gasification is a technology suitable for MSW that uses a specific type of allothermal gasifiers. The heat that maintains the endothermic gasification reactions is provided by electrically generated thermal plasma (a plasma torch where an electric arc is created between two electrodes inside a vase and an inert gas is injected through this arc) [39].
\nThe plasma torch temperature varies between 2700 and 4500°C, which is sufficient to crack the complex hydrocarbons in syngas, and all inorganic compounds (glass, metals, heavy metals) are melted in a volcanic-type lava that becomes a basaltic slag after cooling. The advantage of this system is that the syngas is produced in high temperatures, which ensures the destruction of all dioxins and furans. More information about this technology can be found in Refs. [40, 41].
\nTable 3 shows why gasification is attractive among other waste-to-energy technologies, due to its high efficiency for electricity generation at a lower unit cost.
\nPerformance parameter | \nIncineration | \nPyrolysis | \nPlasma gasification | \nConventional gasification | \n
---|---|---|---|---|
Capacity (t/day) | \n250 | \n250 | \n250 | \n250 | \n
Conversion efficiency (MWh/t) | \n0.5 | \n0.3 | \n0.4 | \n0.9 | \n
Power generation capacity (MWh/day) | \n160 | \n180 | \n108 | \n224 | \n
Unit cost/kWh installed | \n435 | \n222 | \n1000 | \n125 | \n
Unit cost (US$/nominal ton/day) | \n500 | \n160 | \n960 | \n112 | \n
Comparison between different MSW thermal treatment technologies [42].
Pyrolysis is the thermal degradation of organic material in an oxygen-deficient atmosphere at approximately 400–900°C, producing gas, liquid and solid products. The yield and composition of the products are influenced by a range of pyrolysis process parameters, including the type of waste, reactor system, gas residence time, contact time, heating rate, temperature, pressure ranges, and presence of catalysts [43].
\nDue to the different operation conditions, pyrolysis can be classified into three main categories: slow, fast and flash pyrolysis.
\nPyrolysis is a promising technology and is currently utilized in many regions of the world for MSW disposal and energy generation. The objective of MSW pyrolysis is to treat waste, reduce its volume and associated hazards, destroying potentially harmful substances. Pyrolysis can also involve energy recovery from waste, in the form of heat, steam, electricity, or fuel (e.g., oil, char, and gas).
\nThere are several types of pyrolysis reactors for MSW treatment operating in different countries, of which the most common are fixed-bed, fluidized bed, and rotary kiln reactors. Fixed-bed equipment is easy to operate and control, but presents disadvantages such as uneven heating and discontinuous running. The fluidized bed reactor can operate continuously and presents some advantages, such as high heat transfer efficiency and manageable temperature, but the resulting pyrolysis gas presents low calorific value. The rotary kiln reactor presents high internal heating and good adaptability to MSW; however, this technology presents a difficulty associated with the sealing of connectors [44].
\nMore details on typical pyrolysis reactors, problems and MSW plants and products can be found in Refs. [42, 45, 46].
\nAnaerobic digestion consists of a set of processes in which microorganisms consume the organic matter present in waste, in the absence of oxygen. This process occurs naturally in some types of soil and in the sediments settled on the bottom of a body of water (e.g., rivers, lakes, oceans, and swamps), where oxygen cannot penetrate. Decomposition of the submerse biomass occurs at the bottom of hydroelectricity reservoirs, producing methane.
\nThere are several chemical reactions associated with conversion processes, which are in chemical balance. Generally, although some authors classify the anaerobic digestion process in two or even three steps, it is more common to utilize four steps to describe the process, as depicted in Table 4.
\nThe main aspects that influence anaerobic digestion are [48, 49]:
\npH/alkalinity: methanogenic bacteria are sensitive to acid environments, and an increase in the pH will inhibit their growth. pH varies throughout the different steps of the process due to the generation of fatty acids, CO2, and bicarbonates. pH correction is accomplished through the addition of a basic compound (CaCO3, NaOH). The optimal range of pH is between 6.6 and 7.4.
\nTemperature: temperature is related to the growth of microbes, and therefore, its control is very important for optimal growth/development of microorganisms and performance of anaerobic digestion. The process can occur in two ranges, mesophilic (25–40°C) and thermophilic (55–65°C). The mesophilic range is an interval of temperature conditions that enables bacteria to be more tolerant to changes in the environment, constituting more resistant microorganisms, but with higher retention times and lower production of biogas. This condition enables the use of simpler reactors, without complex control systems, with simpler operation strategies that entail lower capital costs. However, within thermophilic conditions, there is a higher production of biogas, with lower retention times. In these conditions, microorganisms are less tolerant to changes in the environment, which if occur, can compromise the production. A more complex, precise control system is required, with higher capital costs associated.
\nSubstrate concentrations: an increase in the organic load can lead to an excessive production of acids, which can act as inhibitors for other reactions and cause lower biogas yield.
\nPartial H2pressure: an increase in pressure can lead to system collapse due to accumulation of acids.
\nC/N ratio: in the anaerobic digestion process, carbon corresponds to the source of energy, and nitrogen enables microbial growth. The optimal ratio between carbon (C) and nitrogen (N) varies between 20 and 30. High values of the C/N relationship are associated with a fast consumption of nitrogen, which can limit microbial growth and reduce gas production. Lower C/N values lead to accumulation of ammonia, which affects the pH of the reactor.
\nAnaerobic digestion adds value to MSW, generating an overall positive impact on the environment as it avoids a series of issues (negative impacts) associated with the natural decomposition process that occurs in landfills, besides enabling the substitution of other fossil raw materials.
\nThe process of anaerobic digestion can occur in controlled environments, such as in biodigesters, which recover energy from waste, and in sanitary landfills. Sanitary landfills are locations for the controlled disposal of waste, reducing its negative environmental impact, and for the control of lixiviate material. Some landfills generate electricity from the biogas produced.
\nBiogas production from organics within the MSW stream is in the range of 100–150 m3 of biogas per ton of source separated organics (SSO) [50].
\nThere are currently several commercially consolidated technologies for biodigestion, such as the Dranco, Valorga, Kompoga, BTA, and Linde-BRV systems. These technologies are widely employed in Europe, with 118 plants in operation, which totalize a combined treatment capacity 5.12 million tons of MSW per year. The Valorga system alone presents an installed capacity of 2.19 million tons of MSW [51, 52]. Table 5 presents a summary of size, capacity and applications of anaerobic digestion systems.
\nStep | \nDescription | \n
---|---|
Hydrolysis | \nOrganic polymolecules are cracked into standard molecules such as sugars, amino, and fatty acids with the addition of hydroxyl groups. This is accomplished by hydrolytic bacteria. | \n
Acidogenesis | \nSugars, fatty, and amino acids are converted into smaller molecules, with the formation of volatile fatty acids (acetic, propionic, butyric, and valeric acids) and production of ammonia, carbon dioxide, and H2S as subproducts. | \n
Acetogenesis | \nThe molecules produced during acidogenesis are digested, producing carbon dioxide, hydrogen, and acetic acid. | \n
Methanogenesis | \nFormation of methane, carbon dioxide, and water. | \n
Description of the anaerobic digestion phases [47].
Size | \nCapacity (t/year) | \nElectricity production | \nTypical applications | \n
---|---|---|---|
Small | \nUp to 7500 | \n25–250 kWe | \nResidential and agricultural (farms) applications | \n
Intermediate | \n7500–30,000 | \n250–1 MWe | \nAgricultural applications or digestible waste production facilities | \n
Large | \nAbove 30,000 | \nOver 1 MWe | \nCentralized, with several mixed raw materials (municipal, industrial) | \n
Size, capacity, and applications of anaerobic digestion systems [53].
More details about WtE such as biogas technologies, process, efficiencies, economic, and environment aspects can be found in Refs. [50, 54].
\nLandfill gas (LFG) is formed when organic wastes decompose anaerobically in a landfill. Although LFG gas is generated under aerobic and anaerobic conditions, the initial aerobic phase is short-lived and produces a gas with a much lower energy content than does the long-term anaerobic phase which follows.
\nThere are several models developed to estimate the amount of biogas that can be produced from a sanitary landfill. According to Ref. [55], these models can be divided into:
\nZero-order models: generation of biogas is considered constant throughout time, with no influence of age and type of waste.
\nFirst-order models: consider waste characteristics, such as humidity, carbon content, MSW availability.
\nSecond-order models: utilize the reactions that occur during organic matter degradation, constituting a second-order kinetic model.
\nNumerical and mathematical models: consider the different variables involved in the process, and require a higher number of inputs.
\nThe most utilized models for the estimation of biogas production from waste are the first-order models, of which the IPCC and LandGEM [55] are the most employed.
\nDeveloped by the Intergovernmental Panel on Climate Change (IPCC), it is a first-order decay model (revised equations of IPCC-2006). It considers the degradation rates of waste and generation of methane throughout time. In the case of MSW, information on the different types of residues (food scraps, paper, wood, textiles, etc.) is required [56]. According to the IPCC model, the amount of methane produced is given by:
\n\n\n
L0(t) is the methane generation potential, expressed as:
\nMCF(t) is the methane correction factor and reflects the management of the disposal locations (dimensionless), DOC(t) is the degradable organic carbon (t carbon/t waste), DOCf is the fraction of degradable carbon (dimensionless), F is the methane fraction within biogas (dimensionless), 16/12 is the conversion ratio between carbon (C) and methane (CH4) (dimensionless), R(n) is the recovered methane (t CH4/t waste), n are the years considered, and OX is an oxidation factor (reflects the amount of methane in the residual mass that is oxidized in the soil and cover layer (dimensionless).
\nThe Landfill Gas Emissions Model (LandGEM) was developed in 2005 by the Control Technology Center of the Environmental Protection Agency of the U.S.A. This mathematical model is utilized to estimate the amount of landfill gas generated in a specific location, allowing for variations to be introduced. Besides methane, 49 other compounds can be calculated. It is based on electronic worksheets that use a first-order decay equation. It is considered that methane generation peaks soon after initial disposal of waste and the methane generation rate decays exponentially as organic matter is consumed by bacteria [55]:
\n\n\n
There is a great potential for electricity generation from landfill gas (biogas), as 1 ton of methane can be equivalent to 3.67 MWh—considering a conversion efficiency of 30%, this can be equivalent to 1.1 MWhe [57]. This way, considering the ever-growing restrictions regarding MSW disposal along with the high volumes of MSW generated (with high energy potential), the use of anaerobic digestion has been the focus of several studies. The International Energy Agency (IEA) has a study group dedicated to biogas energy, Task 37: energy from biogas, with the objective of approaching the challenges related to economic and environmental sustainability of the production and utilization of biogas [58].
\nWith the increasing necessity of promoting renewable energies, along with the emergence of new technologies that have lowered production costs, anaerobic digestion has been attracting the attention of developed European countries and also of populous countries such as India and China [1].
\nAnother factor that contributes to the economic viability of anaerobic biodigestion is the progressive trend of countries adopting laws that prohibit the disposal of organic waste in sanitary landfills, demanding technologies that can effectively manage waste and recover the energy still contained within the covalent bonds of organic waste [58].
\nThe study by Ref. [59] presented step-by-step, thorough calculations for landfill gas generation capacity, including the total amount of solid waste disposed, total organic matter, fractions of degradable organics, methane generated, methane captured, and finally, the amount of approximately 65,000 tons of captured LFG in 30 years. The leachate flow in the landfill was 8000 m3/year. The landfill could produce approximately 135 GWh of electricity throughout its lifetime, with a global efficiency of almost 84%.
\nInvestment costs depend on the degree of complexity of the technology, as well as whether the system requires auxiliary processes such as pretreatment, gas cleaning, among others. Table 6 presents cost estimated for different waste treatment technologies.
\nWTE technologies | \nCapital cost (US$/ton of MSW/year) | \nOperational cost (US$/ton of MSW/year) | \n
---|---|---|
Incineration | \n400–700 | \n40–70 | \n
Pyrolysis | \n400–700 | \n50–80 | \n
Gasification | \n250–850 | \n45–85 | \n
Anaerobic digestion | \n50–350 | \n5–35 | \n
Landfilling with gas recovery | \n10–30 | \n1–3 | \n
Cost estimates for different waste treatment technologies [60].
Regarding the costs associated with MSW disposal, biological routes present considerably lower costs than thermochemical routes. The facilities that utilize biological routes present simpler construction, when compared with thermochemical facilities. Besides, operational costs correspond to approximately 1% of the capital cost required.
\nNowadays, it becomes more evident that mankind is facing serious difficulties regarding waste disposal and therefore can be its own victim. Waste disposal is unavoidable, but special, systematic efforts must be directed to establish a turnaround strategy.
\nOne of the biggest challenges for modern society is establishing an effective strategy for the management and treatment of municipal solid waste. This strategy should consider, whenever possible, economic and environmental viewpoints. Global warming mitigation alternatives include the harvesting of landfill gas as an important waste management strategy.
\nThere are currently different technological routes for municipal solid waste, which could transform these from a challenge or a problem into a source of clean energy and useful recyclable raw materials. At the same time, the impact of waste on the environment would decrease, benefitting human health and natural resources.
\nJosé Carlos Escobar Palacio wishes to express his thanks to the Brazilian National Research and Development Council (CNPq), grant no. 310674/2015-8 and the Foundation for Research Support of the State of Minas Gerais (FAPEMIG). Monica Carvalho would also like to acknowledge the support received by CNPq, grant no. 303199/2015-6. José Joaquim Conceição Soares Santos would like to thank the National Agency of Petroleum Gas and Biofuels (ANP) and the Foundation for Support to Research and Innovation of Espírito Santo (FAPES) for the financial support. Dimas José Rúa Orozco wish to express their thanks to the Coordination of Improvement of Higher Level Personnel (CAPES) for the financial support through the National Postdoctoral Program—PNPD/CAPES.
\nIntechOpen's Authorship Policy is based on ICMJE criteria for authorship. An Author, one must:
',metaTitle:"Authorship Policy",metaDescription:"IN TECH's Authorship Policy is based on ICMJE criteria for authorship. In order to be identified as an Author, one must:",metaKeywords:null,canonicalURL:"/page/authorship-policy",contentRaw:'[{"type":"htmlEditorComponent","content":"All contributors who meet these criteria are listed as Authors. Their exact contributions should be described in the manuscript at the time of submission.
\\n\\nConversely, all contributors who do not meet these criteria should be listed in the Acknowledgments section of the manuscript, along with a short description of their specific contributions.
\\n\\nCHANGES IN AUTHORSHIP
\\n\\nIf it is felt necessary to make changes to the list of Authors after a manuscript has been submitted or published, it is the responsibility of the Author concerned to provide a valid reason to amend the published list. Additionally, all listed Authors must verify and approve the proposed changes in order for any amendments to be made.
\\n\\nAFFILIATION
\\n\\nAuthors are responsible for ensuring all addresses and emails provided are correct. Under affiliation(s) all Authors should indicate where the research was conducted. Please note that no changes to the affiliation(s) can be made after the chapter has been published.
\\n\\nPolicy last updated: 2017-05-29
\\n"}]'},components:[{type:"htmlEditorComponent",content:"All contributors who meet these criteria are listed as Authors. Their exact contributions should be described in the manuscript at the time of submission.
\n\nConversely, all contributors who do not meet these criteria should be listed in the Acknowledgments section of the manuscript, along with a short description of their specific contributions.
\n\nCHANGES IN AUTHORSHIP
\n\nIf it is felt necessary to make changes to the list of Authors after a manuscript has been submitted or published, it is the responsibility of the Author concerned to provide a valid reason to amend the published list. Additionally, all listed Authors must verify and approve the proposed changes in order for any amendments to be made.
\n\nAFFILIATION
\n\nAuthors are responsible for ensuring all addresses and emails provided are correct. Under affiliation(s) all Authors should indicate where the research was conducted. Please note that no changes to the affiliation(s) can be made after the chapter has been published.
\n\nPolicy last updated: 2017-05-29
\n"}]},successStories:{items:[]},authorsAndEditors:{filterParams:{sort:"featured,name"},profiles:[{id:"6700",title:"Dr.",name:"Abbass A.",middleName:null,surname:"Hashim",slug:"abbass-a.-hashim",fullName:"Abbass A. Hashim",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/6700/images/1864_n.jpg",biography:"Currently I am carrying out research in several areas of interest, mainly covering work on chemical and bio-sensors, semiconductor thin film device fabrication and characterisation.\nAt the moment I have very strong interest in radiation environmental pollution and bacteriology treatment. The teams of researchers are working very hard to bring novel results in this field. I am also a member of the team in charge for the supervision of Ph.D. students in the fields of development of silicon based planar waveguide sensor devices, study of inelastic electron tunnelling in planar tunnelling nanostructures for sensing applications and development of organotellurium(IV) compounds for semiconductor applications. I am a specialist in data analysis techniques and nanosurface structure. I have served as the editor for many books, been a member of the editorial board in science journals, have published many papers and hold many patents.",institutionString:null,institution:{name:"Sheffield Hallam University",country:{name:"United Kingdom"}}},{id:"54525",title:"Prof.",name:"Abdul Latif",middleName:null,surname:"Ahmad",slug:"abdul-latif-ahmad",fullName:"Abdul Latif Ahmad",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"20567",title:"Prof.",name:"Ado",middleName:null,surname:"Jorio",slug:"ado-jorio",fullName:"Ado Jorio",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universidade Federal de Minas Gerais",country:{name:"Brazil"}}},{id:"47940",title:"Dr.",name:"Alberto",middleName:null,surname:"Mantovani",slug:"alberto-mantovani",fullName:"Alberto Mantovani",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"12392",title:"Mr.",name:"Alex",middleName:null,surname:"Lazinica",slug:"alex-lazinica",fullName:"Alex Lazinica",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/12392/images/7282_n.png",biography:"Alex Lazinica is the founder and CEO of IntechOpen. After obtaining a Master's degree in Mechanical Engineering, he continued his PhD studies in Robotics at the Vienna University of Technology. Here he worked as a robotic researcher with the university's Intelligent Manufacturing Systems Group as well as a guest researcher at various European universities, including the Swiss Federal Institute of Technology Lausanne (EPFL). During this time he published more than 20 scientific papers, gave presentations, served as a reviewer for major robotic journals and conferences and most importantly he co-founded and built the International Journal of Advanced Robotic Systems- world's first Open Access journal in the field of robotics. Starting this journal was a pivotal point in his career, since it was a pathway to founding IntechOpen - Open Access publisher focused on addressing academic researchers needs. Alex is a personification of IntechOpen key values being trusted, open and entrepreneurial. Today his focus is on defining the growth and development strategy for the company.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"19816",title:"Prof.",name:"Alexander",middleName:null,surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/19816/images/1607_n.jpg",biography:"Alexander I. Kokorin: born: 1947, Moscow; DSc., PhD; Principal Research Fellow (Research Professor) of Department of Kinetics and Catalysis, N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, Moscow.\r\nArea of research interests: physical chemistry of complex-organized molecular and nanosized systems, including polymer-metal complexes; the surface of doped oxide semiconductors. He is an expert in structural, absorptive, catalytic and photocatalytic properties, in structural organization and dynamic features of ionic liquids, in magnetic interactions between paramagnetic centers. The author or co-author of 3 books, over 200 articles and reviews in scientific journals and books. He is an actual member of the International EPR/ESR Society, European Society on Quantum Solar Energy Conversion, Moscow House of Scientists, of the Board of Moscow Physical Society.",institutionString:null,institution:{name:"Semenov Institute of Chemical Physics",country:{name:"Russia"}}},{id:"62389",title:"PhD.",name:"Ali Demir",middleName:null,surname:"Sezer",slug:"ali-demir-sezer",fullName:"Ali Demir Sezer",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/62389/images/3413_n.jpg",biography:"Dr. Ali Demir Sezer has a Ph.D. from Pharmaceutical Biotechnology at the Faculty of Pharmacy, University of Marmara (Turkey). He is the member of many Pharmaceutical Associations and acts as a reviewer of scientific journals and European projects under different research areas such as: drug delivery systems, nanotechnology and pharmaceutical biotechnology. Dr. Sezer is the author of many scientific publications in peer-reviewed journals and poster communications. Focus of his research activity is drug delivery, physico-chemical characterization and biological evaluation of biopolymers micro and nanoparticles as modified drug delivery system, and colloidal drug carriers (liposomes, nanoparticles etc.).",institutionString:null,institution:{name:"Marmara University",country:{name:"Turkey"}}},{id:"61051",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"100762",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"St David's Medical Center",country:{name:"United States of America"}}},{id:"107416",title:"Dr.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Texas Cardiac Arrhythmia",country:{name:"United States of America"}}},{id:"64434",title:"Dr.",name:"Angkoon",middleName:null,surname:"Phinyomark",slug:"angkoon-phinyomark",fullName:"Angkoon Phinyomark",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/64434/images/2619_n.jpg",biography:"My name is Angkoon Phinyomark. I received a B.Eng. degree in Computer Engineering with First Class Honors in 2008 from Prince of Songkla University, Songkhla, Thailand, where I received a Ph.D. degree in Electrical Engineering. My research interests are primarily in the area of biomedical signal processing and classification notably EMG (electromyography signal), EOG (electrooculography signal), and EEG (electroencephalography signal), image analysis notably breast cancer analysis and optical coherence tomography, and rehabilitation engineering. I became a student member of IEEE in 2008. During October 2011-March 2012, I had worked at School of Computer Science and Electronic Engineering, University of Essex, Colchester, Essex, United Kingdom. In addition, during a B.Eng. I had been a visiting research student at Faculty of Computer Science, University of Murcia, Murcia, Spain for three months.\n\nI have published over 40 papers during 5 years in refereed journals, books, and conference proceedings in the areas of electro-physiological signals processing and classification, notably EMG and EOG signals, fractal analysis, wavelet analysis, texture analysis, feature extraction and machine learning algorithms, and assistive and rehabilitative devices. I have several computer programming language certificates, i.e. Sun Certified Programmer for the Java 2 Platform 1.4 (SCJP), Microsoft Certified Professional Developer, Web Developer (MCPD), Microsoft Certified Technology Specialist, .NET Framework 2.0 Web (MCTS). I am a Reviewer for several refereed journals and international conferences, such as IEEE Transactions on Biomedical Engineering, IEEE Transactions on Industrial Electronics, Optic Letters, Measurement Science Review, and also a member of the International Advisory Committee for 2012 IEEE Business Engineering and Industrial Applications and 2012 IEEE Symposium on Business, Engineering and Industrial Applications.",institutionString:null,institution:{name:"Joseph Fourier University",country:{name:"France"}}},{id:"55578",title:"Dr.",name:"Antonio",middleName:null,surname:"Jurado-Navas",slug:"antonio-jurado-navas",fullName:"Antonio Jurado-Navas",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/55578/images/4574_n.png",biography:"Antonio Jurado-Navas received the M.S. degree (2002) and the Ph.D. degree (2009) in Telecommunication Engineering, both from the University of Málaga (Spain). He first worked as a consultant at Vodafone-Spain. From 2004 to 2011, he was a Research Assistant with the Communications Engineering Department at the University of Málaga. In 2011, he became an Assistant Professor in the same department. From 2012 to 2015, he was with Ericsson Spain, where he was working on geo-location\ntools for third generation mobile networks. Since 2015, he is a Marie-Curie fellow at the Denmark Technical University. His current research interests include the areas of mobile communication systems and channel modeling in addition to atmospheric optical communications, adaptive optics and statistics",institutionString:null,institution:{name:"University of Malaga",country:{name:"Spain"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:5698},{group:"region",caption:"Middle and South America",value:2,count:5172},{group:"region",caption:"Africa",value:3,count:1689},{group:"region",caption:"Asia",value:4,count:10243},{group:"region",caption:"Australia and Oceania",value:5,count:888},{group:"region",caption:"Europe",value:6,count:15647}],offset:12,limit:12,total:117315},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{hasNoEditors:"0",sort:"dateEndThirdStepPublish",topicId:"19"},books:[{type:"book",id:"10578",title:"Pharmacogenetics",subtitle:null,isOpenForSubmission:!0,hash:"ca2bc2ff6e15a7b735d662d9664086b1",slug:null,bookSignature:"Dr. Islam Khalil",coverURL:"https://cdn.intechopen.com/books/images_new/10578.jpg",editedByType:null,editors:[{id:"226598",title:"Dr.",name:"Islam",surname:"Khalil",slug:"islam-khalil",fullName:"Islam Khalil"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10531",title:"Advances in Nanoparticle Research for Biomedical Applications",subtitle:null,isOpenForSubmission:!0,hash:"1e9e08e7275f2b928af7911b523252f1",slug:null,bookSignature:"Dr. Maria Carmo Pereira, MSc. Maria João Ramalho and Dr. Joana A. Loureiro",coverURL:"https://cdn.intechopen.com/books/images_new/10531.jpg",editedByType:null,editors:[{id:"82791",title:"Dr.",name:"Maria Carmo",surname:"Pereira",slug:"maria-carmo-pereira",fullName:"Maria Carmo Pereira"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10356",title:"Pharmacognosy - Medicinal Plants",subtitle:null,isOpenForSubmission:!0,hash:"943e56ccaaf19ff696d25aa638ae37d6",slug:null,bookSignature:"Prof. Hany El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/10356.jpg",editedByType:null,editors:[{id:"54719",title:"Prof.",name:"Hany",surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10357",title:"Drug Metabolism",subtitle:null,isOpenForSubmission:!0,hash:"3bd3ae5041cab45020555b49152b1ddc",slug:null,bookSignature:"Dr. Katherine Dunnington",coverURL:"https://cdn.intechopen.com/books/images_new/10357.jpg",editedByType:null,editors:[{id:"232694",title:"Dr.",name:"Katherine",surname:"Dunnington",slug:"katherine-dunnington",fullName:"Katherine Dunnington"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9829",title:"Biosimilars",subtitle:null,isOpenForSubmission:!0,hash:"c72171c1d1cf6df5aad989cb07cc8e4e",slug:null,bookSignature:"Dr. Valderilio Feijó Feijó Azevedo and Dr. Robert Moots",coverURL:"https://cdn.intechopen.com/books/images_new/9829.jpg",editedByType:null,editors:[{id:"69875",title:"Dr.",name:"Valderilio",surname:"Feijó Azevedo",slug:"valderilio-feijo-azevedo",fullName:"Valderilio Feijó Azevedo"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10234",title:"High-Throughput Screening for Drug Discovery",subtitle:null,isOpenForSubmission:!0,hash:"37e6f5b6dd0567efb63dca4b2c73495f",slug:null,bookSignature:"Prof. Shailendra K. Saxena",coverURL:"https://cdn.intechopen.com/books/images_new/10234.jpg",editedByType:null,editors:[{id:"158026",title:"Prof.",name:"Shailendra K.",surname:"Saxena",slug:"shailendra-k.-saxena",fullName:"Shailendra K. Saxena"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:9},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:18},{group:"topic",caption:"Business, Management and Economics",value:7,count:2},{group:"topic",caption:"Chemistry",value:8,count:7},{group:"topic",caption:"Computer and Information Science",value:9,count:11},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:5},{group:"topic",caption:"Engineering",value:11,count:15},{group:"topic",caption:"Environmental Sciences",value:12,count:2},{group:"topic",caption:"Immunology and Microbiology",value:13,count:5},{group:"topic",caption:"Materials Science",value:14,count:4},{group:"topic",caption:"Mathematics",value:15,count:1},{group:"topic",caption:"Medicine",value:16,count:62},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:1},{group:"topic",caption:"Neuroscience",value:18,count:1},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:6},{group:"topic",caption:"Physics",value:20,count:2},{group:"topic",caption:"Psychology",value:21,count:3},{group:"topic",caption:"Robotics",value:22,count:1},{group:"topic",caption:"Social Sciences",value:23,count:3},{group:"topic",caption:"Technology",value:24,count:1},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:2}],offset:12,limit:12,total:6},popularBooks:{featuredBooks:[{type:"book",id:"7802",title:"Modern Slavery and Human Trafficking",subtitle:null,isOpenForSubmission:!1,hash:"587a0b7fb765f31cc98de33c6c07c2e0",slug:"modern-slavery-and-human-trafficking",bookSignature:"Jane Reeves",coverURL:"https://cdn.intechopen.com/books/images_new/7802.jpg",editors:[{id:"211328",title:"Prof.",name:"Jane",middleName:null,surname:"Reeves",slug:"jane-reeves",fullName:"Jane Reeves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,isOpenForSubmission:!1,hash:"13aaddf5fdbbc78387e77a7da2388bf6",slug:"animal-reproduction-in-veterinary-medicine",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9961",title:"Data Mining",subtitle:"Methods, Applications and Systems",isOpenForSubmission:!1,hash:"ed79fb6364f2caf464079f94a0387146",slug:"data-mining-methods-applications-and-systems",bookSignature:"Derya Birant",coverURL:"https://cdn.intechopen.com/books/images_new/9961.jpg",editors:[{id:"15609",title:"Dr.",name:"Derya",middleName:null,surname:"Birant",slug:"derya-birant",fullName:"Derya Birant"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9157",title:"Neurodegenerative Diseases",subtitle:"Molecular Mechanisms and Current Therapeutic Approaches",isOpenForSubmission:!1,hash:"bc8be577966ef88735677d7e1e92ed28",slug:"neurodegenerative-diseases-molecular-mechanisms-and-current-therapeutic-approaches",bookSignature:"Nagehan Ersoy Tunalı",coverURL:"https://cdn.intechopen.com/books/images_new/9157.jpg",editors:[{id:"82778",title:"Ph.D.",name:"Nagehan",middleName:null,surname:"Ersoy Tunalı",slug:"nagehan-ersoy-tunali",fullName:"Nagehan Ersoy Tunalı"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8686",title:"Direct Torque Control Strategies of Electrical Machines",subtitle:null,isOpenForSubmission:!1,hash:"b6ad22b14db2b8450228545d3d4f6b1a",slug:"direct-torque-control-strategies-of-electrical-machines",bookSignature:"Fatma Ben Salem",coverURL:"https://cdn.intechopen.com/books/images_new/8686.jpg",editors:[{id:"295623",title:"Associate Prof.",name:"Fatma",middleName:null,surname:"Ben Salem",slug:"fatma-ben-salem",fullName:"Fatma Ben Salem"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7434",title:"Molecular Biotechnology",subtitle:null,isOpenForSubmission:!1,hash:"eceede809920e1ec7ecadd4691ede2ec",slug:"molecular-biotechnology",bookSignature:"Sergey Sedykh",coverURL:"https://cdn.intechopen.com/books/images_new/7434.jpg",editors:[{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",slug:"sergey-sedykh",fullName:"Sergey Sedykh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9839",title:"Outdoor Recreation",subtitle:"Physiological and Psychological Effects on Health",isOpenForSubmission:!1,hash:"5f5a0d64267e32567daffa5b0c6a6972",slug:"outdoor-recreation-physiological-and-psychological-effects-on-health",bookSignature:"Hilde G. Nielsen",coverURL:"https://cdn.intechopen.com/books/images_new/9839.jpg",editors:[{id:"158692",title:"Ph.D.",name:"Hilde G.",middleName:null,surname:"Nielsen",slug:"hilde-g.-nielsen",fullName:"Hilde G. Nielsen"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9208",title:"Welding",subtitle:"Modern Topics",isOpenForSubmission:!1,hash:"7d6be076ccf3a3f8bd2ca52d86d4506b",slug:"welding-modern-topics",bookSignature:"Sadek Crisóstomo Absi Alfaro, Wojciech Borek and Błażej Tomiczek",coverURL:"https://cdn.intechopen.com/books/images_new/9208.jpg",editors:[{id:"65292",title:"Prof.",name:"Sadek Crisostomo Absi",middleName:"C. Absi",surname:"Alfaro",slug:"sadek-crisostomo-absi-alfaro",fullName:"Sadek Crisostomo Absi Alfaro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8697",title:"Virtual Reality and Its Application in Education",subtitle:null,isOpenForSubmission:!1,hash:"ee01b5e387ba0062c6b0d1e9227bda05",slug:"virtual-reality-and-its-application-in-education",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/8697.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:5141},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"9208",title:"Welding",subtitle:"Modern Topics",isOpenForSubmission:!1,hash:"7d6be076ccf3a3f8bd2ca52d86d4506b",slug:"welding-modern-topics",bookSignature:"Sadek Crisóstomo Absi Alfaro, Wojciech Borek and Błażej Tomiczek",coverURL:"https://cdn.intechopen.com/books/images_new/9208.jpg",editors:[{id:"65292",title:"Prof.",name:"Sadek Crisostomo Absi",middleName:"C. Absi",surname:"Alfaro",slug:"sadek-crisostomo-absi-alfaro",fullName:"Sadek Crisostomo Absi Alfaro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8697",title:"Virtual Reality and Its Application in Education",subtitle:null,isOpenForSubmission:!1,hash:"ee01b5e387ba0062c6b0d1e9227bda05",slug:"virtual-reality-and-its-application-in-education",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/8697.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9785",title:"Endometriosis",subtitle:null,isOpenForSubmission:!1,hash:"f457ca61f29cf7e8bc191732c50bb0ce",slug:"endometriosis",bookSignature:"Courtney Marsh",coverURL:"https://cdn.intechopen.com/books/images_new/9785.jpg",editors:[{id:"255491",title:"Dr.",name:"Courtney",middleName:null,surname:"Marsh",slug:"courtney-marsh",fullName:"Courtney Marsh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9376",title:"Contemporary Developments and Perspectives in International Health Security",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"b9a00b84cd04aae458fb1d6c65795601",slug:"contemporary-developments-and-perspectives-in-international-health-security-volume-1",bookSignature:"Stanislaw P. Stawicki, Michael S. Firstenberg, Sagar C. Galwankar, Ricardo Izurieta and Thomas Papadimos",coverURL:"https://cdn.intechopen.com/books/images_new/9376.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7769",title:"Medical Isotopes",subtitle:null,isOpenForSubmission:!1,hash:"f8d3c5a6c9a42398e56b4e82264753f7",slug:"medical-isotopes",bookSignature:"Syed Ali Raza Naqvi and Muhammad Babar Imrani",coverURL:"https://cdn.intechopen.com/books/images_new/7769.jpg",editors:[{id:"259190",title:"Dr.",name:"Syed Ali Raza",middleName:null,surname:"Naqvi",slug:"syed-ali-raza-naqvi",fullName:"Syed Ali Raza Naqvi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9279",title:"Concepts, Applications and Emerging Opportunities in Industrial Engineering",subtitle:null,isOpenForSubmission:!1,hash:"9bfa87f9b627a5468b7c1e30b0eea07a",slug:"concepts-applications-and-emerging-opportunities-in-industrial-engineering",bookSignature:"Gary Moynihan",coverURL:"https://cdn.intechopen.com/books/images_new/9279.jpg",editors:[{id:"16974",title:"Dr.",name:"Gary",middleName:null,surname:"Moynihan",slug:"gary-moynihan",fullName:"Gary Moynihan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7807",title:"A Closer Look at Organizational Culture in Action",subtitle:null,isOpenForSubmission:!1,hash:"05c608b9271cc2bc711f4b28748b247b",slug:"a-closer-look-at-organizational-culture-in-action",bookSignature:"Süleyman Davut Göker",coverURL:"https://cdn.intechopen.com/books/images_new/7807.jpg",editors:[{id:"190035",title:"Associate Prof.",name:"Süleyman Davut",middleName:null,surname:"Göker",slug:"suleyman-davut-goker",fullName:"Süleyman Davut Göker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"7434",title:"Molecular Biotechnology",subtitle:null,isOpenForSubmission:!1,hash:"eceede809920e1ec7ecadd4691ede2ec",slug:"molecular-biotechnology",bookSignature:"Sergey Sedykh",coverURL:"https://cdn.intechopen.com/books/images_new/7434.jpg",editedByType:"Edited by",editors:[{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",slug:"sergey-sedykh",fullName:"Sergey Sedykh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,isOpenForSubmission:!1,hash:"13aaddf5fdbbc78387e77a7da2388bf6",slug:"animal-reproduction-in-veterinary-medicine",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",editedByType:"Edited by",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9569",title:"Methods in Molecular Medicine",subtitle:null,isOpenForSubmission:!1,hash:"691d3f3c4ac25a8093414e9b270d2843",slug:"methods-in-molecular-medicine",bookSignature:"Yusuf Tutar",coverURL:"https://cdn.intechopen.com/books/images_new/9569.jpg",editedByType:"Edited by",editors:[{id:"158492",title:"Prof.",name:"Yusuf",middleName:null,surname:"Tutar",slug:"yusuf-tutar",fullName:"Yusuf Tutar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9839",title:"Outdoor Recreation",subtitle:"Physiological and Psychological Effects on Health",isOpenForSubmission:!1,hash:"5f5a0d64267e32567daffa5b0c6a6972",slug:"outdoor-recreation-physiological-and-psychological-effects-on-health",bookSignature:"Hilde G. Nielsen",coverURL:"https://cdn.intechopen.com/books/images_new/9839.jpg",editedByType:"Edited by",editors:[{id:"158692",title:"Ph.D.",name:"Hilde G.",middleName:null,surname:"Nielsen",slug:"hilde-g.-nielsen",fullName:"Hilde G. Nielsen"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7802",title:"Modern Slavery and Human Trafficking",subtitle:null,isOpenForSubmission:!1,hash:"587a0b7fb765f31cc98de33c6c07c2e0",slug:"modern-slavery-and-human-trafficking",bookSignature:"Jane Reeves",coverURL:"https://cdn.intechopen.com/books/images_new/7802.jpg",editedByType:"Edited by",editors:[{id:"211328",title:"Prof.",name:"Jane",middleName:null,surname:"Reeves",slug:"jane-reeves",fullName:"Jane Reeves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8063",title:"Food Security in Africa",subtitle:null,isOpenForSubmission:!1,hash:"8cbf3d662b104d19db2efc9d59249efc",slug:"food-security-in-africa",bookSignature:"Barakat Mahmoud",coverURL:"https://cdn.intechopen.com/books/images_new/8063.jpg",editedByType:"Edited by",editors:[{id:"92016",title:"Dr.",name:"Barakat",middleName:null,surname:"Mahmoud",slug:"barakat-mahmoud",fullName:"Barakat Mahmoud"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10118",title:"Plant Stress Physiology",subtitle:null,isOpenForSubmission:!1,hash:"c68b09d2d2634fc719ae3b9a64a27839",slug:"plant-stress-physiology",bookSignature:"Akbar Hossain",coverURL:"https://cdn.intechopen.com/books/images_new/10118.jpg",editedByType:"Edited by",editors:[{id:"280755",title:"Dr.",name:"Akbar",middleName:null,surname:"Hossain",slug:"akbar-hossain",fullName:"Akbar Hossain"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9157",title:"Neurodegenerative Diseases",subtitle:"Molecular Mechanisms and Current Therapeutic Approaches",isOpenForSubmission:!1,hash:"bc8be577966ef88735677d7e1e92ed28",slug:"neurodegenerative-diseases-molecular-mechanisms-and-current-therapeutic-approaches",bookSignature:"Nagehan Ersoy Tunalı",coverURL:"https://cdn.intechopen.com/books/images_new/9157.jpg",editedByType:"Edited by",editors:[{id:"82778",title:"Ph.D.",name:"Nagehan",middleName:null,surname:"Ersoy Tunalı",slug:"nagehan-ersoy-tunali",fullName:"Nagehan Ersoy Tunalı"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9961",title:"Data Mining",subtitle:"Methods, Applications and Systems",isOpenForSubmission:!1,hash:"ed79fb6364f2caf464079f94a0387146",slug:"data-mining-methods-applications-and-systems",bookSignature:"Derya Birant",coverURL:"https://cdn.intechopen.com/books/images_new/9961.jpg",editedByType:"Edited by",editors:[{id:"15609",title:"Dr.",name:"Derya",middleName:null,surname:"Birant",slug:"derya-birant",fullName:"Derya Birant"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8686",title:"Direct Torque Control Strategies of Electrical Machines",subtitle:null,isOpenForSubmission:!1,hash:"b6ad22b14db2b8450228545d3d4f6b1a",slug:"direct-torque-control-strategies-of-electrical-machines",bookSignature:"Fatma Ben Salem",coverURL:"https://cdn.intechopen.com/books/images_new/8686.jpg",editedByType:"Edited by",editors:[{id:"295623",title:"Associate Prof.",name:"Fatma",middleName:null,surname:"Ben Salem",slug:"fatma-ben-salem",fullName:"Fatma Ben Salem"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"160",title:"Surface Science",slug:"surface-science",parent:{title:"Materials Science",slug:"materials-science"},numberOfBooks:16,numberOfAuthorsAndEditors:329,numberOfWosCitations:227,numberOfCrossrefCitations:162,numberOfDimensionsCitations:405,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicSlug:"surface-science",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"10061",title:"21st Century Surface Science",subtitle:"a Handbook",isOpenForSubmission:!1,hash:"69253b3c7ba801a5fcd9c47827345f93",slug:"21st-century-surface-science-a-handbook",bookSignature:"Phuong Pham, Pratibha Goel, Samir Kumar and Kavita Yadav",coverURL:"https://cdn.intechopen.com/books/images_new/10061.jpg",editedByType:"Edited by",editors:[{id:"236073",title:"Dr.",name:"Phuong",middleName:"Viet",surname:"Pham",slug:"phuong-pham",fullName:"Phuong Pham"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10050",title:"Corrosion",subtitle:null,isOpenForSubmission:!1,hash:"cf66006063d4d72349fb33cc056095c1",slug:"corrosion",bookSignature:"Ambrish Singh",coverURL:"https://cdn.intechopen.com/books/images_new/10050.jpg",editedByType:"Edited by",editors:[{id:"215348",title:"Dr.",name:"Ambrish",middleName:null,surname:"Singh",slug:"ambrish-singh",fullName:"Ambrish Singh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7343",title:"Superhydrophobic Surfaces",subtitle:"Fabrications to Practical Applications",isOpenForSubmission:!1,hash:"017db4d856b5d454aead24128743ba3e",slug:"superhydrophobic-surfaces-fabrications-to-practical-applications",bookSignature:"Mehdi Khodaei, Xiuyong Chen and Hua Li",coverURL:"https://cdn.intechopen.com/books/images_new/7343.jpg",editedByType:"Edited by",editors:[{id:"19478",title:"Dr.",name:"Mehdi",middleName:null,surname:"Khodaei",slug:"mehdi-khodaei",fullName:"Mehdi Khodaei"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8242",title:"Applied Surface Science",subtitle:null,isOpenForSubmission:!1,hash:"b2515a9d613325af2ddf6d8ef2b53f4d",slug:"applied-surface-science",bookSignature:"Gurrappa Injeti",coverURL:"https://cdn.intechopen.com/books/images_new/8242.jpg",editedByType:"Edited by",editors:[{id:"12369",title:"Dr.",name:"Gurrappa",middleName:null,surname:"Injeti",slug:"gurrappa-injeti",fullName:"Gurrappa Injeti"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7550",title:"Corrosion Inhibitors",subtitle:null,isOpenForSubmission:!1,hash:"4d09bcd91e393d15a578f1b632f118e7",slug:"corrosion-inhibitors",bookSignature:"Ambrish Singh",coverURL:"https://cdn.intechopen.com/books/images_new/7550.jpg",editedByType:"Edited by",editors:[{id:"215348",title:"Dr.",name:"Ambrish",middleName:null,surname:"Singh",slug:"ambrish-singh",fullName:"Ambrish Singh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6671",title:"Paint and Coatings Industry",subtitle:null,isOpenForSubmission:!1,hash:"1dc37c2c972a253d544da9849049222f",slug:"paint-and-coatings-industry",bookSignature:"Faris Yilmaz",coverURL:"https://cdn.intechopen.com/books/images_new/6671.jpg",editedByType:"Edited by",editors:[{id:"36900",title:"Dr.",name:"Faris",middleName:"Sad",surname:"Yılmaz",slug:"faris-yilmaz",fullName:"Faris Yılmaz"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7253",title:"Coatings and Thin-Film Technologies",subtitle:null,isOpenForSubmission:!1,hash:"98b8dfac28575877f1846a661c9150bc",slug:"coatings-and-thin-film-technologies",bookSignature:"Jaime Andres Perez-Taborda and Alba G. Avila Bernal",coverURL:"https://cdn.intechopen.com/books/images_new/7253.jpg",editedByType:"Edited by",editors:[{id:"193020",title:"Dr.",name:"Jaime Andres",middleName:null,surname:"Perez Taborda",slug:"jaime-andres-perez-taborda",fullName:"Jaime Andres Perez Taborda"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7385",title:"Cavitation",subtitle:"Selected Issues",isOpenForSubmission:!1,hash:"075ee4bb432760777ffcba092d0cffae",slug:"cavitation-selected-issues",bookSignature:"Wojciech Borek, Tomasz Tański and Mariusz Król",coverURL:"https://cdn.intechopen.com/books/images_new/7385.jpg",editedByType:"Edited by",editors:[{id:"186373",title:"Dr.",name:"Wojciech",middleName:null,surname:"Borek",slug:"wojciech-borek",fullName:"Wojciech Borek"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7471",title:"Advanced Surface Engineering Research",subtitle:null,isOpenForSubmission:!1,hash:"4c1a23accacc46fd18b49f2e5c6d303e",slug:"advanced-surface-engineering-research",bookSignature:"Mohammad Asaduzzaman Chowdhury",coverURL:"https://cdn.intechopen.com/books/images_new/7471.jpg",editedByType:"Edited by",editors:[{id:"185329",title:"Prof.",name:"Mohammad Asaduzzaman",middleName:null,surname:"Chowdhury",slug:"mohammad-asaduzzaman-chowdhury",fullName:"Mohammad Asaduzzaman Chowdhury"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7352",title:"Granularity in Materials Science",subtitle:null,isOpenForSubmission:!1,hash:"a451ff13b9bc3b08989979518577594a",slug:"granularity-in-materials-science",bookSignature:"George Kyzas and Athanasios C. Mitropoulos",coverURL:"https://cdn.intechopen.com/books/images_new/7352.jpg",editedByType:"Edited by",editors:[{id:"152296",title:"Dr.",name:"George",middleName:"Z.",surname:"Kyzas",slug:"george-kyzas",fullName:"George Kyzas"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6702",title:"Polymer Rheology",subtitle:null,isOpenForSubmission:!1,hash:"c24234818cd4b2ce3ed569c2b29f714c",slug:"polymer-rheology",bookSignature:"Jose Luis Rivera-Armenta and Beatriz Adriana Salazar Cruz",coverURL:"https://cdn.intechopen.com/books/images_new/6702.jpg",editedByType:"Edited by",editors:[{id:"107855",title:"Dr.",name:"Jose Luis",middleName:null,surname:"Rivera Armenta",slug:"jose-luis-rivera-armenta",fullName:"Jose Luis Rivera Armenta"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6512",title:"Superfluids and Superconductors",subtitle:null,isOpenForSubmission:!1,hash:"24385ec1d5de9c6597896900c80ee279",slug:"superfluids-and-superconductors",bookSignature:"Roberto Zivieri",coverURL:"https://cdn.intechopen.com/books/images_new/6512.jpg",editedByType:"Edited by",editors:[{id:"181334",title:"Prof.",name:"Roberto",middleName:null,surname:"Zivieri",slug:"roberto-zivieri",fullName:"Roberto Zivieri"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:16,mostCitedChapters:[{id:"30968",doi:"10.5772/36975",title:"Polymer Gel Rheology and Adhesion",slug:"rheology-and-adhesion-of-polymer-gels",totalDownloads:15106,totalCrossrefCites:8,totalDimensionsCites:56,book:{slug:"rheology",title:"Rheology",fullTitle:"Rheology"},signatures:"Anne M. Grillet, Nicholas B. Wyatt and Lindsey M. Gloe",authors:[{id:"110676",title:"Dr.",name:"Anne",middleName:null,surname:"Grillet",slug:"anne-grillet",fullName:"Anne Grillet"},{id:"138225",title:"Dr.",name:"Nicholas",middleName:null,surname:"Wyatt",slug:"nicholas-wyatt",fullName:"Nicholas Wyatt"},{id:"138226",title:"Ms.",name:"Lindsey",middleName:null,surname:"Gloe",slug:"lindsey-gloe",fullName:"Lindsey Gloe"}]},{id:"48822",doi:"10.5772/60808",title:"Wettability of Nanostructured Surfaces",slug:"wettability-of-nanostructured-surfaces",totalDownloads:2386,totalCrossrefCites:7,totalDimensionsCites:22,book:{slug:"wetting-and-wettability",title:"Wetting and Wettability",fullTitle:"Wetting and Wettability"},signatures:"L. Duta, A.C. Popescu, I. Zgura, N. Preda and I.N. Mihailescu",authors:[{id:"17636",title:"Dr.",name:"Ion",middleName:"N.",surname:"Mihailescu",slug:"ion-mihailescu",fullName:"Ion Mihailescu"},{id:"23532",title:"Dr.",name:"Andrei",middleName:null,surname:"Popescu",slug:"andrei-popescu",fullName:"Andrei Popescu"},{id:"174343",title:"Dr.",name:"Liviu",middleName:null,surname:"Duta",slug:"liviu-duta",fullName:"Liviu Duta"},{id:"174344",title:"Dr.",name:"Irina",middleName:null,surname:"Zgura",slug:"irina-zgura",fullName:"Irina Zgura"},{id:"174345",title:"Dr.",name:"Ligia",middleName:null,surname:"Frunza",slug:"ligia-frunza",fullName:"Ligia Frunza"}]},{id:"30975",doi:"10.5772/36619",title:"Solution Properties of κ-Carrageenan and Its Interaction with Other Polysaccharides in Aqueous Media",slug:"solution-properties-of-k-carrageenan-and-its-interaction-with-other-polysaccharides-in-aqueous-media",totalDownloads:7122,totalCrossrefCites:2,totalDimensionsCites:20,book:{slug:"rheology",title:"Rheology",fullTitle:"Rheology"},signatures:"Alberto Tecante and María del Carmen Núñez Santiago",authors:[{id:"109087",title:"Prof.",name:"Alberto",middleName:null,surname:"Tecante",slug:"alberto-tecante",fullName:"Alberto Tecante"},{id:"109098",title:"Dr.",name:"Maria Del Carmen",middleName:null,surname:"Nunez-Santiago",slug:"maria-del-carmen-nunez-santiago",fullName:"Maria Del Carmen Nunez-Santiago"}]}],mostDownloadedChaptersLast30Days:[{id:"67748",title:"Formation of Anticorrosive Structures and Thin Films on Metal Surfaces by Applying EDM",slug:"formation-of-anticorrosive-structures-and-thin-films-on-metal-surfaces-by-applying-edm",totalDownloads:618,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"corrosion-inhibitors",title:"Corrosion Inhibitors",fullTitle:"Corrosion Inhibitors"},signatures:"Pavel Topala, Alexandr Ojegov and Vitalie Besliu",authors:[{id:"254355",title:"Prof.",name:"Pavel",middleName:null,surname:"Topala",slug:"pavel-topala",fullName:"Pavel Topala"},{id:"254366",title:"Dr.",name:"Alexandr",middleName:null,surname:"Ojegov",slug:"alexandr-ojegov",fullName:"Alexandr Ojegov"},{id:"254368",title:"Dr.",name:"Besliu",middleName:null,surname:"Vitalie",slug:"besliu-vitalie",fullName:"Besliu Vitalie"}]},{id:"67077",title:"Electrochemical Techniques for Corrosion and Tribocorrosion Monitoring: Fundamentals of Electrolytic Corrosion",slug:"electrochemical-techniques-for-corrosion-and-tribocorrosion-monitoring-fundamentals-of-electrolytic-",totalDownloads:856,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"corrosion-inhibitors",title:"Corrosion Inhibitors",fullTitle:"Corrosion Inhibitors"},signatures:"Abdenacer Berradja",authors:[{id:"238628",title:"Ph.D.",name:"Abdenacer",middleName:null,surname:"Berradja",slug:"abdenacer-berradja",fullName:"Abdenacer Berradja"}]},{id:"64392",title:"Corrosion Inhibitors",slug:"corrosion-inhibitors",totalDownloads:1769,totalCrossrefCites:4,totalDimensionsCites:5,book:{slug:"corrosion-inhibitors",title:"Corrosion Inhibitors",fullTitle:"Corrosion Inhibitors"},signatures:"Geethamani Palanisamy",authors:[{id:"253697",title:"Dr.",name:"Geethamani",middleName:null,surname:"P",slug:"geethamani-p",fullName:"Geethamani P"}]},{id:"48818",title:"Modification of Surface Energy and Wetting of Textile Fibers",slug:"modification-of-surface-energy-and-wetting-of-textile-fibers",totalDownloads:2345,totalCrossrefCites:5,totalDimensionsCites:10,book:{slug:"wetting-and-wettability",title:"Wetting and Wettability",fullTitle:"Wetting and Wettability"},signatures:"Franco Ferrero and Monica Periolatto",authors:[{id:"173940",title:"Prof.",name:"Franco",middleName:null,surname:"Ferrero",slug:"franco-ferrero",fullName:"Franco Ferrero"},{id:"174224",title:"Ph.D.",name:"Monica",middleName:null,surname:"Periolatto",slug:"monica-periolatto",fullName:"Monica Periolatto"}]},{id:"72939",title:"Carbon Nanotubes: Synthesis, Properties and Applications",slug:"carbon-nanotubes-synthesis-properties-and-applications",totalDownloads:200,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"21st-century-surface-science-a-handbook",title:"21st Century Surface Science",fullTitle:"21st Century Surface Science - a Handbook"},signatures:"Aravind Kumar Jagadeesan, Krithiga Thangavelu and Venkatesan Dhananjeyan",authors:[{id:"319215",title:"Dr.",name:"Aravind",middleName:null,surname:"Kumar",slug:"aravind-kumar",fullName:"Aravind Kumar"},{id:"321759",title:"Dr.",name:"Krithiga",middleName:null,surname:"Thangavelu",slug:"krithiga-thangavelu",fullName:"Krithiga Thangavelu"},{id:"321760",title:"Mr.",name:"Venkatesan",middleName:null,surname:"Dhanancheyan",slug:"venkatesan-dhanancheyan",fullName:"Venkatesan Dhanancheyan"}]},{id:"62882",title:"Inside the Phenomenological Aspects of Wet Granulation: Role of Process Parameters",slug:"inside-the-phenomenological-aspects-of-wet-granulation-role-of-process-parameters",totalDownloads:659,totalCrossrefCites:1,totalDimensionsCites:1,book:{slug:"granularity-in-materials-science",title:"Granularity in Materials Science",fullTitle:"Granularity in Materials Science"},signatures:"Veronica De Simone, Diego Caccavo, Annalisa Dalmoro, Gaetano\nLamberti, Matteo d’Amore and Anna Angela Barba",authors:[{id:"140173",title:"Prof.",name:"Anna Angela",middleName:null,surname:"Barba",slug:"anna-angela-barba",fullName:"Anna Angela Barba"},{id:"143947",title:"Prof.",name:"Matteo",middleName:null,surname:"D'Amore",slug:"matteo-d'amore",fullName:"Matteo D'Amore"},{id:"176104",title:"Prof.",name:"Gaetano",middleName:null,surname:"Lamberti",slug:"gaetano-lamberti",fullName:"Gaetano Lamberti"},{id:"176239",title:"MSc.",name:"Diego",middleName:null,surname:"Caccavo",slug:"diego-caccavo",fullName:"Diego Caccavo"},{id:"181500",title:"Dr.",name:"Annalisa",middleName:null,surname:"Dalmoro",slug:"annalisa-dalmoro",fullName:"Annalisa Dalmoro"},{id:"260822",title:"MSc.",name:"Veronica",middleName:null,surname:"De Simone",slug:"veronica-de-simone",fullName:"Veronica De Simone"}]},{id:"40738",title:"Viscoelastic Properties of Biological Materials",slug:"viscoelastic-properties-of-biological-materials",totalDownloads:4861,totalCrossrefCites:6,totalDimensionsCites:17,book:{slug:"viscoelasticity-from-theory-to-biological-applications",title:"Viscoelasticity",fullTitle:"Viscoelasticity - From Theory to Biological Applications"},signatures:"Naoki Sasaki",authors:[{id:"140935",title:"Prof.",name:"Naoki",middleName:null,surname:"Sasaki",slug:"naoki-sasaki",fullName:"Naoki Sasaki"}]},{id:"40740",title:"Viscoelasticity in Biological Systems: A Special Focus on Microbes",slug:"viscoelasticity-in-biological-systems-a-special-focus-on-microbes",totalDownloads:3578,totalCrossrefCites:6,totalDimensionsCites:10,book:{slug:"viscoelasticity-from-theory-to-biological-applications",title:"Viscoelasticity",fullTitle:"Viscoelasticity - From Theory to Biological Applications"},signatures:"Supriya Bhat, Dong Jun, Biplab C. Paul and Tanya E. S Dahms",authors:[{id:"144710",title:"Dr",name:"Tanya",middleName:null,surname:"Dahms",slug:"tanya-dahms",fullName:"Tanya Dahms"},{id:"144719",title:"MSc.",name:"Biplab",middleName:null,surname:"Paul",slug:"biplab-paul",fullName:"Biplab Paul"},{id:"144721",title:"MSc.",name:"Dong",middleName:null,surname:"Jun",slug:"dong-jun",fullName:"Dong Jun"},{id:"167022",title:"M.Sc.",name:"Supriya",middleName:"Venkatesh",surname:"Bhat",slug:"supriya-bhat",fullName:"Supriya Bhat"}]},{id:"62670",title:"Organometal Halide Perovskites Thin Film and Their Impact on the Efficiency of Perovskite Solar Cells",slug:"organometal-halide-perovskites-thin-film-and-their-impact-on-the-efficiency-of-perovskite-solar-cell",totalDownloads:907,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"coatings-and-thin-film-technologies",title:"Coatings and Thin-Film Technologies",fullTitle:"Coatings and Thin-Film Technologies"},signatures:"Ahmed Mourtada Elseman",authors:[{id:"221890",title:"Dr.",name:"Ahmed Mourtada",middleName:null,surname:"Elseman",slug:"ahmed-mourtada-elseman",fullName:"Ahmed Mourtada Elseman"}]},{id:"30968",title:"Polymer Gel Rheology and Adhesion",slug:"rheology-and-adhesion-of-polymer-gels",totalDownloads:15106,totalCrossrefCites:8,totalDimensionsCites:56,book:{slug:"rheology",title:"Rheology",fullTitle:"Rheology"},signatures:"Anne M. Grillet, Nicholas B. Wyatt and Lindsey M. Gloe",authors:[{id:"110676",title:"Dr.",name:"Anne",middleName:null,surname:"Grillet",slug:"anne-grillet",fullName:"Anne Grillet"},{id:"138225",title:"Dr.",name:"Nicholas",middleName:null,surname:"Wyatt",slug:"nicholas-wyatt",fullName:"Nicholas Wyatt"},{id:"138226",title:"Ms.",name:"Lindsey",middleName:null,surname:"Gloe",slug:"lindsey-gloe",fullName:"Lindsey Gloe"}]}],onlineFirstChaptersFilter:{topicSlug:"surface-science",limit:3,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[{type:"book",id:"10176",title:"Microgrids and Local Energy Systems",subtitle:null,isOpenForSubmission:!0,hash:"c32b4a5351a88f263074b0d0ca813a9c",slug:null,bookSignature:"Prof. Nick Jenkins",coverURL:"https://cdn.intechopen.com/books/images_new/10176.jpg",editedByType:null,editors:[{id:"55219",title:"Prof.",name:"Nick",middleName:null,surname:"Jenkins",slug:"nick-jenkins",fullName:"Nick Jenkins"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:8,limit:8,total:1},route:{name:"profile.detail",path:"/profiles/20012/raushaniya-petrova",hash:"",query:{},params:{id:"20012",slug:"raushaniya-petrova"},fullPath:"/profiles/20012/raushaniya-petrova",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()