EOs extracted from plant parts.
\r\n\t
",isbn:"978-1-83968-460-9",printIsbn:"978-1-83968-459-3",pdfIsbn:"978-1-83969-232-1",doi:null,price:0,priceEur:0,priceUsd:0,slug:null,numberOfPages:0,isOpenForSubmission:!0,hash:"babca2dea1c80719111734cc57a21a4c",bookSignature:"Dr. Amin Talei",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/10404.jpg",keywords:"Water Budget, Ground Measurement, Satellite Data, Empirical Models, Physical Models, Data-Driven Models, Artificial Neural Network, Neuro-Fuzzy Systems, Genetic Programming, Irrigation Management, Drought, Aquifer Management",numberOfDownloads:null,numberOfWosCitations:0,numberOfCrossrefCitations:null,numberOfDimensionsCitations:null,numberOfTotalCitations:null,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"October 29th 2020",dateEndSecondStepPublish:"November 26th 2020",dateEndThirdStepPublish:"January 25th 2021",dateEndFourthStepPublish:"April 15th 2021",dateEndFifthStepPublish:"June 14th 2021",remainingDaysToSecondStep:"2 months",secondStepPassed:!0,currentStepOfPublishingProcess:3,editedByType:null,kuFlag:!1,biosketch:"A pioneering researcher in developing hydrological models using adaptive neuro-fuzzy systems, a pioneering researcher in tropical biofiltration systems, appointed head of the Civil Engineering Discipline in Monash University Malaysia.",coeditorOneBiosketch:null,coeditorTwoBiosketch:null,coeditorThreeBiosketch:null,coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:[{id:"335732",title:"Dr.",name:"Amin",middleName:null,surname:"Talei",slug:"amin-talei",fullName:"Amin Talei",profilePictureURL:"https://mts.intechopen.com/storage/users/335732/images/system/335732.jpg",biography:"Associate Professor Amin Talei joined Monash University Malaysia in January 2013 and currently is the head of Civil Engineering discipline. His previous appointment was as researcher in School of Civil & Environmental Engineering of Nanyang Technological University of Singapore where he studied for his PhD during 2008-2011. His research is predominantly focused on hydrological modeling and flood forecasting using artificial intelligence techniques. Most recently, he has been also involved in research projects dealing with sustainable urban water management. To date, he has published over 50 articles in reputable journals and international conference proceedings. He has supervised several PhD and Master students and won the Supervisor of the Year Award in Monash University Malaysia in 2017. He has absorbed over AUD370,000 research funding from industry and international/national funding agencies since 2014 and is a chartered professional engineer of the Engineers Australia.",institutionString:"Monash University Malaysia",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"Monash University Malaysia",institutionURL:null,country:{name:"Malaysia"}}}],coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"10",title:"Earth and Planetary Sciences",slug:"earth-and-planetary-sciences"}],chapters:null,productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"297737",firstName:"Mateo",lastName:"Pulko",middleName:null,title:"Mr.",imageUrl:"https://mts.intechopen.com/storage/users/297737/images/8492_n.png",email:"mateo.p@intechopen.com",biography:"As an Author Service Manager my responsibilities include monitoring and facilitating all publishing activities for authors and editors. From chapter submission and review, to approval and revision, copyediting and design, until final publication, I work closely with authors and editors to ensure a simple and easy publishing process. I maintain constant and effective communication with authors, editors and reviewers, which allows for a level of personal support that enables contributors to fully commit and concentrate on the chapters they are writing, editing, or reviewing. I assist authors in the preparation of their full chapter submissions and track important deadlines and ensure they are met. I help to coordinate internal processes such as linguistic review, and monitor the technical aspects of the process. As an ASM I am also involved in the acquisition of editors. Whether that be identifying an exceptional author and proposing an editorship collaboration, or contacting researchers who would like the opportunity to work with IntechOpen, I establish and help manage author and editor acquisition and contact."}},relatedBooks:[{type:"book",id:"5962",title:"Estuary",subtitle:null,isOpenForSubmission:!1,hash:"43058846a64b270e9167d478e966161a",slug:"estuary",bookSignature:"William Froneman",coverURL:"https://cdn.intechopen.com/books/images_new/5962.jpg",editedByType:"Edited by",editors:[{id:"109336",title:"Prof.",name:"William",surname:"Froneman",slug:"william-froneman",fullName:"William Froneman"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"878",title:"Phytochemicals",subtitle:"A Global Perspective of Their Role in Nutrition and Health",isOpenForSubmission:!1,hash:"ec77671f63975ef2d16192897deb6835",slug:"phytochemicals-a-global-perspective-of-their-role-in-nutrition-and-health",bookSignature:"Venketeshwer Rao",coverURL:"https://cdn.intechopen.com/books/images_new/878.jpg",editedByType:"Edited by",editors:[{id:"82663",title:"Dr.",name:"Venketeshwer",surname:"Rao",slug:"venketeshwer-rao",fullName:"Venketeshwer Rao"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"4816",title:"Face Recognition",subtitle:null,isOpenForSubmission:!1,hash:"146063b5359146b7718ea86bad47c8eb",slug:"face_recognition",bookSignature:"Kresimir Delac and Mislav Grgic",coverURL:"https://cdn.intechopen.com/books/images_new/4816.jpg",editedByType:"Edited by",editors:[{id:"528",title:"Dr.",name:"Kresimir",surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"67434",title:"Essential Oils: Partnering with Antibiotics",doi:"10.5772/intechopen.86575",slug:"essential-oils-partnering-with-antibiotics",body:'Essential oil (EO) is a concentrated mixture of organic compounds. EOs are produced by plants as a form of defense in addition to being an attractant to insects for dispersion of pollens and seeds [1, 2]. These oils are formed by the glandular trichomes and specialized secretory structure like secretory hairs, ducts, cavities, and glands; they then diffuse to the surface organs of plant such as leaves and flowers [3, 4]. The process of EOs formation involves three pathways which are the methyl-D-erythritol-4-phosphate (MEP), mevalonate, and malonic acid pathways [5]. The MEP and mevalonate pathways contribute in the biosynthesis of isoprenoids, whereas the malonic acid pathway will form the phenolic compounds [6, 7].
EOs have been used for many years for different purposes, such as to preserve raw and processed food because it can inhibit the growth of microorganisms like bacteria, viruses, and fungi [1, 8, 9]. Besides food, EO was also utilized in the area of perfumery for many years especially for ancient civilizations of India, Greece, Egypt, and Rome [10, 11].
In addition, EOs also serve as an alternative medicine that is important for local populations to treat severe burns to accelerate healing [11] and also for diseases such as leishmaniasis, schistosomiasis, and malaria [12, 13]. To date, approximately 10% of all EOs have been analyzed and commercially used as an insect repellent, attributed by its low toxicity to mammalian cells and the environment [10, 14]. However, certain EOs may cause toxicity or allergies which results in health and safety problems. Hence, national and international organizations have set standards to control the use of EOs [15].
EOs can be found in various plants species, in particular those that belong to the Coniferae, Myrtaceae, Rutaceae, Labiatae, Umbelliferae, Alliaceae, and Zingiberaceae families [16, 17]. EOs are derived from different plant parts, such as flowers, leaves, wood, roots, seeds, rhizomes, and fruits [18]. See Table 1 for examples of EOs found in each of the plant parts.
In general, EOs can be classified based on their chemical composition, aroma created by the oil, evaporation speed, taxonomy or the families they belong to, their therapeutic uses, consistency, their origin, and the alphabetical order [16, 30]. Classification based on consistency, for example, can be divided into essences, balms, and resins [16, 31]. See Table 2 for definition and examples of each.
Based on consistency | Definition | Examples |
---|---|---|
Essences | Volatile liquid at room temperature [16] | Lavender, jasmine, geranium, rose [32, 33] |
Balsams | Thick very volatile natural extract from tree or bush [16] | Copaiba balsam, Peruvian balsam, Canada balsam, Tolu balsam, Cabreuva balsam, Bangui balsam [16, 34] |
Resins | Solid or semisolid products that comprise of derivates and abietic acid [16] | Patchouli, sandalwood, frankincense [33] |
Classification of EOs based on consistencies.
Furthermore, there are three classifications of EOs based on their origin which are natural, artificial, and synthetic [16]. The natural EOs are taken from the plant without physical or chemical modifications, while the artificial oils are obtained by enriching the essence with extra components (can be one or more). The synthetic EOs, however, are obtained by combining many chemical substances together [16]. See Table 3 for comparison between natural and synthetic EOs.
Types of essential oil | Disadvantages | Advantages |
---|---|---|
Natural | Expensive, need a lot of natural sources to create, can cause burns if not diluted [15, 35, 36] | Great smell, helpful for physical and mental health [36] |
Synthetic | No therapeutic properties, damaging the skin and respiratory system [36] | Cheap, commonly used as fragrance and taste enhancers, long lasting [15, 36] |
Classification of EOs based on their origin.
Five thousand years ago, the ancient civilizations have already incorporated the use of machines for EO extraction [11]. However, there has been an expansion of the different extraction methods today. One of the important methods is the hydro-distillation which is divided into water distillation, water-steam distillation, and steam distillation [37, 38]. Hydro-distillation method involves hydro-diffusion, hydrolysis, and decomposition by heat [18]. In addition, steam distillation is performed by using the Clevenger system to extract oil from both fresh and dried plants, and it takes about 3 h [1, 11]. Another method is the expression method which utilizes the machines to compress the EO out of the plant [9, 11]. Additionally, solvent extraction and ultrasonic extraction methods are also routinely used [17].
Throughout the distillation process, water is separated by gravity, and at the end it leaves the volatile liquid behind; this liquid is the EO [16, 39]. EOs that are extracted by the use of chemical solvents cannot be called true EOs according to the National Cancer Institute, because they can cause changes in the clarity, scent, and fragrance of the oil [40]. The four criteria that affect the amount of essential oils produced are (1) time of distillation, (2) temperature, (3) pressure, and (4) plant quality.
Hydro-distillation is the most commonly used method of extraction of EOs in which the plant is boiled in water [41, 42]. This method takes 1 h of distillation for fresh samples and 1 h and 15 min for dried samples. In the hydro-distillation method, a round-bottomed flask is used to place the plant material in with distilled water; if the plant material is dry, 1000 ml of distilled water should be used for 75 g of plant material, and if it is fresh material, 400 ml of distilled water should be used with 200 g of plant material; if the sample of plant is smaller, however, they can adjust the amount of water using this ratio: 13.3 ml of distilled water for each gram of dry plant. For water distillation, the modified Clevenger trap should be used to extract EO, and at the end the volume of the oil should be determined, and the EO should be analyzed immediately [43, 44, 45]. An advanced distillation method which is the microwave-assisted hydro-distillation can be used to shorten extraction time [46, 47].
Steam distillation is the traditional method of extraction of EOs from plants [37]. The fundamental principle of steam distillation is that the mixture is allowed to be distilled at a temperature that is lower than the boiling point of the component; EO substances have a high boiling point that can reach 200°C; however, these substances will be volatile when steam or boiling water is present which is in 100°C; then the hot gas mixture will be condensed to form oil if it passes through a cooling system [48]. In steam distillation, the steam is first passed into a flask that contains the plant material; after that the condensate at the bottom of the flask should be collected which will be the water and oil; then the extract is condensated three times with ethyl ether to ensure that the essential oil is fully extracted; then the moisture should be removed by adding sodium sulfate to the ethyl ether, followed by rotary evaporation to remove ethyl ether; and finally the volume of the EO is determined [43]. The advantages of this method of extraction are that it is rapid and can be controlled by the operator and it gives an acceptable quality than EOs extracted with other methods [48].
Solvent extraction method or liquid-liquid method is done by separating compounds based on their part solubility [49]. The basic principle of the solvent extraction method is that between two immiscible solvents, the solute distributes itself in a fixed ratio, whereby one is usually water and the other is an organic solvent [50]. In this method, the plant material will be grinded in a mortar that contains anhydrous hexane Na2SO4, followed by four rounds of extraction with hexane to obtain the yellow extract, then this is followed by adding a sufficient amount of Norite A charcoal for all extracts to remove the yellow color after low-speed centrifugation, and eventually the solution will be concentrated under air stream at room temperature [37, 43, 49]. A newer method of solvent extraction, called the microwave-assisted simultaneous distillation-solvent extraction (MW-SDE), is faster and simpler and uses fewer solvents to determine volatile compounds than conventional methods [51].
EOs are volatile and become liquid at room temperature; they might be colorless or slightly yellow in color when extracted. Moreover EOs are lower in density than water, except for sassafras and clove essences [16]. EOs can be either liposoluble or soluble in alcohol and organic solvents, but they are only slightly soluble in water [4, 16, 32].
Plants metabolites are divided into primary and secondary metabolites. The primary metabolites include proteins, DNA, and compounds that are important for cellular function. Secondary metabolites are produced by plants as a response of stress to deter herbivores or animals that would feed on them [52, 53]. Of the secondary metabolites, plant terpenes are the most numerous and diverse natural products of plant secondary metabolites which can be found in EOs [53]. They are found in monoterpene and diterpene oils and may be aliphatic, cyclic, or aromatic depending on the functional group [16]. According to the functional group, they can be alcohols, esters, ethers, hydrocarbon, and aldehydes [16].
The composition varies due to the place of origin, harvesting moment, extraction method, planting time, mineral fertilization, and climate [5, 16, 54]. For example, in warm places there will be more EOs than the cold or hot areas [16]. The concentration of EOs is extremely high due to the extraction methods used [23]. The simplest unit of EOs is the isoprene units that are composed of five carbons which can be assembled to form terpenes [16, 52]. EOs are composed of hydrocarbon molecules. Terpenes, for example, are hydrocarbon molecules that comprise of 10, 15, 20, and 30 carbon atoms and are made out of five-carbon isoprene units [55, 56].
EOs’ main components are divided into terpenoid and non-terpenoid groups present in different concentrations [4]. The non-terpenoid group contains short-chain aliphatic, aromatic, nitrogenated, and sulfated substances [16, 57]. The terpenoid group contains a different composition of hydrocarbon terpenes, terpenoids, and sesquiterpenes which is responsible for the special aroma [5, 58]. In general, the non-terpenoid group is less important than the terpenoid in terms of applications [53].
Antibiotics are effective drugs that play an important role in treating infections and decreasing morbidity and mortality rates [59, 60]. In general, antibiotics kill multidrug-resistant (MDR) bacteria through various mechanisms. Examples include the β-lactam antibiotics that inhibit the bacterial cell wall synthesis, fluoroquinolones that inhibit DNA synthesis, tetracycline which is an inhibitor of protein synthesis, sulfonamides as a metabolic pathway or folic acid synthesis inhibitor, and polymyxin B which interferes with cell membrane integrity [60, 61, 62, 63]. Antibiotic resistance develops naturally but is accelerated when the antibiotics are misused in both human and animals; the bacteria will evolve and develop resistance toward antibiotics, preventing the antibiotic from killing the bacteria [59, 64]. The bacteria subsequently become resistant by many mechanisms depending on the selective pressure incurred by the antibiotic used; for example, if the penicillin is used, the bacteria will become resistant to it by producing enzymes that will act against the antibiotic which is in this situation penicillinase enzyme [39]. For instance, a study conducted in 173 hospitals in Europe showed that high antibiotic consumption hospitals have a higher number of methicillin-resistant Staphylococcus aureus (MRSA) [65].
Antibiotic resistance in microorganisms is increasing at a worrisome rate [66]. Hence, over the years, researchers are exploring possible alternative sources that will be helpful to mitigate MDR bacteria. Of all the potential sources, EO was identified as one of the good alternative sources, because of their effectiveness in folk medicine [67]. Bacteria can be divided into two main types: the gram-positive and the gram-negative. The gram-positive have a thicker peptidoglycan layer than the gram-negative bacteria [68]. Besides that, the gram-negative bacteria also have an outer membrane that is absent in the gram-positive bacteria (Figure 1).
Schematic of different gram-positive (at the top) and gram-negative (at the bottom) cell walls.
Generally, the gram-positive bacteria are less resistant to EOs than gram-negative bacteria [69, 70]. In gram-positive bacteria, hydrophobic molecules are able to penetrate the cell and act on the cell wall and cytoplasm. This is exemplified by the phenolic compounds in EOs against gram-positive bacteria [66]. In the gram-negative bacteria, a thin layer of peptidoglycans is present with an outer membrane that contains LPS. LPS consists of lipid A, core LPS, and O-side chain, which makes the gram-negative bacteria more resistant to EOs than gram-positive bacteria [66, 71]. Small hydrophilic solutes will make use of the porin proteins in the gram-negative bacteria to pass through the outer membrane; it is this porin selectivity that also makes the gram-negative bacteria less susceptible to hydrophobic antibiotics [66, 72, 73].
EOs via their different components have different targets against microorganisms such as the membrane and the cytoplasm [8]. Scientists have also found that the solubility of EO in water allowed them to decipher how EOs penetrated the cell wall of microbes; in other words EOs, being soluble in the cell membrane phospholipid bilayer, diffuse through the membrane [74]. A study done using the EO of Melaleuca alternifolia (tea tree) against MDR gram-negative bacteria (e.g., Escherichia coli and carbapenem-resistant K. pneumoniae) and methicillin-resistant S. aureus (MRSA) showed that there is a bactericidal effect of tea tree EO on these microorganisms [75]. This indicated that the EO can be used to kill resistant bacteria [74]. Moreover, EO phenolic compounds’ effect is concentration-dependent, whereby at low concentrations the phenolic compound will work with enzymes to produce energy, while at high concentration it will denature proteins [66, 76].
Minimal inhibitory concentration (MIC) is the lowest concentration of a specific drug to inhibit the growth of microorganisms such as bacteria [1, 77]. After knowing that a particular EO has bactericidal, viricidal, and antiparasitic effects, the lowest concentration of EO to inhibit microbial growth should be measured [57, 78]. There are many assays to evaluate and screen for antimicrobial activity such as the disk diffusion test, microdilution (resazurin) or broth method, and agar dilution method [79, 80]. The agar disk diffusion test is commonly used to determine the antibacterial activity of the EO, but this method works only for EO with known components. This is because, for the EOs with unknown components, the antimicrobial effect may give rise to false or negative result caused by the unknown components [81]. Previously, in a study performed using the disk diffusion test to examine the antimicrobial activity of Eucalyptus globulus leaves, EO showed that there was a bacterial inhibitory effect on E. coli and S. aureus [82].
The commonly used alternative method to determine antimicrobial activity is the dilution method through a serial dilution of the EO in several tubes, and then determining the MIC after adding the test microorganism, turbidity is measured as a signal for growth [81]. In this method, the EO is first diluted; then it will be added to the medium that contains the broth culture, followed by incubation for 18 h in 37°C [69]. After the incubation period, the tube with the lowest concentration that showed no sign of growth is the MIC of the EO [69, 83]. However, this method requires a large quantity of the plant extract [81]. A study using the redox dye resazurin for the new modified microdilution method has been carried out to determine the MIC for tea tree EO (Melaleuca alternifolia) against the gram-positive and gram-negative bacteria. The results showed that the resazurin method is accurate to determine the MIC and is higher in sensitivity than the results obtained from the agar dilution assay [80].
EOs’ mechanism of action is poorly understood, but in general it depends on their chemical composition [8, 66, 84]. As antimicrobial resistance to antibiotics is increasing, scientists are currently exploring the ability of the plant extract to modify bacterial resistance against drugs [39]. The three main types of interactions that occur between the combination of antibiotic and EO are synergism, additivity, and antagonism [85]. Synergistic interaction is when the effect of the combined chemicals is greater than the effect of a chemical alone; additive interaction is when the sum of two chemicals is equal to the sum of chemical effect alone, while antagonism is when the whole effect of the two chemicals is less than the sum of effect of a single chemical alone [86]. In a study performed using the tea tree EO against the MDR bacteria, when a combination of tea tree EO with antibiotic (e.g., oxacillin) was tested on the bacteria, in particular the MRSA, a high synergistic index in the sub-inhibitory concentration was recorded [75]. This indicates that the EO can be used to overcome bacterial resistance to antibiotic. The synergism level increases when the combined effect is higher than the individual effect in the combination therapy [39].
Combination therapy is a new method that combines antibiotics and EO to kill resistant bacteria, via enhancement of the antimicrobial activity [39, 87]. Moreover, EOs have more components possessing different mechanisms of actions for many targets than antibiotics that have only one target. Combination therapy would be useful and able to provide a new treatment option for resistance bacteria [39].
Daily, the human body comes into contact with EOs through various sources such as herbs, spices, orange, spearmint, lemongrass, etc., but only limited information about the amount of EO uptake is known [4, 88]. Effects of EO begin to appear after it penetrates the human body in several ways such as by ingestion, by absorbing the EO or diffusion, and by inhalation [4, 89]. EOs can be taken by inhalation through the lungs and distributed into the blood because of their volatility [90, 91, 92]. Moreover, consumption of EO by ingestion should be taken with care because EOs may cause probable toxicity [4]. EOs are used in folk medicine to treat many health problems and can also be used as food preservatives by giving antimicrobial, antioxidant, and anti-inflammation properties [93, 94].
Many studies investigated the efficiency of EOs in combination with antibiotics to combat bacterial resistance; EOs with its compounds and secondary metabolites have shown promising synergistic interaction as an indication that they would be helpful to treat and decrease bacterial resistance to antibiotics [39, 95]. The advantages that make the EOs preferable are that they will decrease adverse reactions, besides being comparatively more cost-effective, with more public acceptance due to traditional usage, and being renewable with better biodegradability properties [39, 96].
The synergistic effects between the EOs and antibiotics against the MDR bacteria have been investigated [97]. The synergistic effect can be defined as the ability of EO components to act together with the antibiotic component to increase the activity of the EO against MDR bacteria [98]. This is important because it will help to reduce the use of antibiotics and decrease the rates of antibiotic resistance [97]. Some studies have been done to assess the combinatory activities of lavender, cinnamon bark, peppermint, and other EOs against bacteria, and the results show there is a synergistic effect [97]. Some of these EOs will be discussed in the following sections.
The lavender EO is used in traditional medicine as well as in cosmetic products; this oil is believed to have sedative, anti-inflammatory, and antimicrobial effects [99]. Lavender EO shows a synergistic effect when combined with piperacillin antibiotic against beta-lactamase-producing Escherichia coli under study with fractional inhibitory concentration (FIC) index between 0.26 and 0.5 [97]. This finding shows that it’s possible to use the lavender EO as an agent in modifying the antibiotic resistance [97]. Another study which aimed to compare the antimicrobial efficacy of four types of lavender oil on MSSA and MSRA shows that by direct contact the oil inhibits the growth of these microbes [100]. Fusidic acid is one of the compounds within this oil which gives it the antimicrobial activity, the mechanism of which is to cause bacterial cell damage by reducing synthesis of proteins [101].
The cinnamon bark EO can be obtained from different parts of the tropical evergreen tree, which is important for human health and agriculture uses [102]. Previously, a study reported that a combination of cinnamon bark EO with piperacillin resulted in a synergistic relationship with FIC ≤ 0.5, and this result indicates the possibility of using cinnamon bark EO as a resistance-modifying agent against MDR bacteria [97, 103]. Cinnamon bark oil contains cinnamaldehyde which is one of the compounds that inhibit the activity of amino acid decarboxylase; this compound with others within the oil gives this oil the ability to inhibit some pathogenic bacteria [104].
Peppermint EO is significant in inhibiting the microbial growth and increasing the shelf-life of food by preventing food spoilage [105]. Combination of piperacillin and peppermint EOs with FIC in the range 0.26–0.5 was found showing a synergistic effect that is absent in 31 other combination pairs that were studied, indicating a promising alternative to reduce the use of antibiotic and achieve the reverse beta-lactam antibiotic resistance [91]. The antibacterial activity for this oil is associated with menthol and ethyl acetate in high concentrations [106].
Research about the reversal antibiotic resistance is important to preserve the healthy microbial ecosystem in the human host. It is imperative to understand the cause of antimicrobial resistance and to find solutions to alleviate the present situation. As discussed above, combination therapy between EOs and antibiotic provides a promising alternative to mitigate MDR bacteria, possibly by disrupting the bacterial cell wall. Although EOs have been proven to be useful for mitigating MDR bacteria spread, there is still much to be done in terms of the combination stability, selectivity, definite mechanism of action, chemical nature, availability of these products in human body, optimal dose, and adverse reactions as a treatment. These gaps need to be taken into consideration before applying EOs for clinical usage. In addition, there is also a need for animal study and human trials in the future, if one intends to employ EOs as a therapeutic option in medical settings.
The authors would like to thank the HCT Research Grants from the Higher Colleges of Technology, UAE for supporting this work.
The authors declare they have no competing interests.
Composites exist in nature. A piece of wood is a composite, with long cellulose fibres held together by a substance called lignin. Composite materials are formed by combining two or more materials that have quite different properties, and they do not dissolve or blend into each other. The different materials in the composite work together to give the composite unique properties. Humans have been using composite materials for thousands of years in different areas. The first uses of composites date back to the 1500 BC, when early Egyptians and Mesopotamian settlers used a mixture of mud and straw to create strong and durable buildings. The combination of mud and straw in a block of brick provides it a strong property against both squeezing and tearing or bending. The straw continued to provide reinforcement to ancient composite products, including pottery and boats [1]. In 1200 AD, the Mongols invented the first composite bow using a combination of “animal glue”, bone, and wood. The bows were pressed and wrapped with birch bark. These bows were powerful and accurate. Composite Mongolian bows helped to ensure Genghis Khan’s military dominance. Due to their advantages such as being light weight and strong, many of the greatest advancements in composites were the result of wartime needs. During World War II, many composite materials were developed and moved from the laboratory into actual production [1, 2].
\nThe development and need for composite materials also result in the fibre-reinforced polymers (FRP) industry. By 1945, more than 7 million pounds of glass fibres were used for various products, primarily for military applications. Composite materials continued to take off after the war and grew rapidly through the 1950s. The composite innovators were ambitiously trying to introduce composites into other markets such as aerospace, construction, and transportation. Soon the benefits of FRP composites, especially its corrosion resistance, became known to the public sector. Boats were one obvious product that benefited. The first composite commercial boat hull was introduced in 1946. A full automobile body was made from composite and tested in 1947 [1, 2]. This led to the development of the 1953 Chevrolet Corvette. The advent of the automobile age gave rise to several new methods for moulding such as compression moulding of bulk moulding compound (BMC) and sheet moulding compound (SMC). The two techniques emerged as the dominant method of moulding for the automotive industry and other industries. In the early 1950s, manufacturing methods such as large-scale filament winding, pultrusion, and vacuum bag moulding were developed. In the 1960s, the marine market became the largest consumer of composite materials [1, 2]. In 1961, the first carbon fibre was patented and several years later became commercially available. In the 1970s the composites industry began to mature. Many better resins and improved reinforcing fibres were developed during this period for composite applications. In the 1970s, the automotive market surpassed marine as the number one market—a position it retains today. During the late 1970s and early 1980s, composites were first used in infrastructure applications in Asia and Europe. The first all-composites pedestrian bridge was installed in Aberfeldy, Scotland, in the 1990s. In this period, the first FRP-reinforced concrete bridge deck was built in McKinleyville, West Virginia, and the first all-composites vehicular bridge deck was built in Russell, Kansas. Composites continue to find applications today [1, 2, 3]. Nanomaterials are incorporated into improved fibres and resins used in new composites. Nanotechnology began to be used in commercial products in the early 2000s. Bulk carbon nanotubes can be used as composite reinforcement in polymers to improve the mechanical, thermal, and electrical properties of the bulk product [3].
\nNowadays, the composite industry is still evolving, with much of the growth now focused around renewable energy. Wind turbine blades, especially, are constantly pushing the limits on size and require advanced composite materials, for example, the engineers can design to tailor the composite based on the performant requirements, making the composite sheet very strong in one direction by aligning the fibres that way, but weaker in another direction where strength is not so important. The engineers can also select properties such as resistance to heat, chemicals, and weathering by choosing an appropriate matrix material. In recent years, an increasing environmental consciousness and awareness of the need for sustainable development have raised interest in using natural fibres as reinforcements in composites to replace synthetic fibres [4, 5, 6, 7]. This chapter seeks to provide an overview of the science and technology in relation to the composite material, manufacturing process, and utilisation.
\nIn general, a composite consists of three components: (i) the matrix as the continuous phase; (ii) the reinforcements as the discontinuous or dispersed phase, including fibre and particles; and (iii) the fine interphase region, also known as the interface [8, 9]. By carefully choosing the matrix, the reinforcement, and the manufacturing process that brings them together, the engineers can tailor the properties to meet specific requirements [10]. Over the recent decades, many new composites have been developed, some with very valuable properties.
\nAny material can serve as a matrix material for composite. However, matrix materials are generally ceramics, metals, and polymers. In reality, the majority of matrix materials that exist on the composites market are polymer. There are several different polymer matrices which can be utilised in composite materials. Among the polymer matrix composites, thermoset matrix composites are more predominant than thermoplastic composites. Though thermoset and thermoplastics sound similar, they have very different properties and applications. Understanding the performance differences can help to make better sourcing decisions and the product designs as composites [11].
\nThermosets are materials that undergo a chemical reaction or curing and normally transform from a liquid to a solid. In its uncured form, the material has small, unlinked molecules known as monomers. The addition of a second material as a cross-linker, curing agent, catalyst, and/or the presence of heat or some other activating influences will initiate the chemical reaction or curing reaction. During this reaction, the molecules cross-link and form significantly longer molecular chains and cross-link network, causing the material to solidify. The change of the thermoset state is permanent and irreversible. Subsequently, exposure to high heat after solidifying will cause the material to degrade, not melt. This is because these materials typically degrade at a temperature below where it would be able to melt.
\nThermoplastics are melt-process able plastics. The thermoplastic materials are processed with heat. When enough heat is added to bring the temperature of the plastic above its melting point, the plastic melts, liquefies, or softens enough to be processed. When the heat source is removed and the temperature of the plastic drops below its melting point, the plastic solidifies back into a glasslike solid. This process can be repeated, with the plastic melting and solidifying as the temperature climbs above and drops below the melting temperature, respectively. However, the material can be increasingly subject to deterioration in its molten state, so there is a practical limit to the number of times that this reprocessing can take place before the material properties begin to suffer. Many thermoplastic polymers are addition-type, capable of yielding very long molecular chain lengths or very high molecular weights [12].
\nBoth thermoset and thermoplastic materials have its place in the market. In broad generalities, thermosets tend to have been around for a long time and have a well-established place in the market, frequently have lower raw material costs, and often provide easy wetting of reinforcing fibre and easy forming to final part geometries. In other words, thermosets are often easier to process than thermoplastic. Thermoplastics tend to be tougher or less brittle than thermoset. They can have better chemical resistance, do not need refrigeration as uncured thermosets (prepreg materials) frequently do, and can be more easily recycled and repaired. Table 1 presents a comparison between thermoset and thermoplastic. This table is not providing all but rather some information for the researchers and manufacturers when considering the utilisation of these materials.
\n\n | Thermoset | \nThermoplastic | \n
---|---|---|
Processing | \nContain monomers that cross-link together during the curing process to form an irreversible chemical bond. The cross-linking process eliminates the risk of the product remelting when heat is applied, making thermosets ideal for high-heat applications such as electronics and appliances | \nPellets soften when heated and become more fluid as additional heat is applied. This characteristic allows thermoplastics to be remoulded and recycled without negatively affecting the material’s physical properties | \n
Features and benefits | \n\n
| \n\n
| \n
Thermoset vs. thermoplastic.
Thermosets are classified into polyester resins, epoxy resins, vinyl ester resins, phenolic, polyurethane, and other high-temperature resins such as cyanate esters, etc. The rapid industrialisation in developing economies the world over is one of the major boosting factors for the thermoset market. The demand for high-performance and lightweight materials from various end-use industries such as automotive, chemical tanks, and water tanks is expected to expand the global market for thermosets over the next 6 years. The growing demand for thermosets from emerging economies like Brazil, Russia, India, and China (BRIC) is expected to drive the market. BRIC nations are the four fastest-growing economies in the world with their GDP growth rates higher than the global GDP growth rate. However, frequent fluctuation in raw material prices acts as one of the major factors inhibiting the market growth. Asia-Pacific accounts for the biggest market for thermosets owing to the growth of the automobile market, primarily in China and India. Japan is a mature market and is expected to remain stagnant over the next years. China is the biggest automobile market in the world, and India also lists itself in the top five automobile markets in the world. Asia, along with being the largest market, is also the fastest-growing market for thermosets. The North American market for thermosets is primarily driven by the regulatory initiative to reduce automobile weight by 50% by 2020 in the USA in order to cut fuel consumption. Polyester resins and polyurethane account for the two most popular types of thermosets in the global market. The global market for thermosets is dominated by big multinational corporations which are present across the value chain. Some of the major companies operating in the thermosets market include Arkema, BASF, Asahi Kasei Chemical Corp, Bayer AG, Chevron Phillips Chemical Company LLC, Sinopec, Dow Chemical Company, Eastman Chemical Company, and Lyondell Basell Industries, among others [13]. To date, thermosets have been used predominantly in the industry. Thermosets are generally favoured for a variety of reasons, especially on commercial aircraft. Thermoset composites have been used for 30–40 years in aerospace. For example, the fuselage of the Boeing 787 is an epoxy-based polymer [14].
\nOn the other hand, the use of thermoplastic polymers (acrylic, polyolefin, acrylonitrile butadiene styrene (ABS), etc.), the more easily moldable and resettable composite material relative to thermoset polymers, is a growing material trend in the fibre-reinforced polymer (FRP) industry. According to the American Composites Manufacturers Association (ACMA), the thermoplastic industry is expected to grow 4.9% over the next years and reach an estimated $8.2 billion by 2017, with even larger opportunities in emerging economies. Thermoplastic polymers also offer an easy solution to recycling composite components, a concern when it comes to adopting composite materials. Thermoplastic composites can repeat the heating and cooling cycle many times, thus giving the product an almost indefinite shelf life and adding more value for industries concerned with composite recyclability. This is especially the case for the growth of natural fibre thermoplastics in the USA and Western Europe. For example, wood-plastic composites, used for decking material and other wood substitutions, have grown by 35–40% in the past 5 years. According to Lucintel (the premier global management consulting and market research firm), countries in Asia and Eastern Europe will lead the growth for thermoplastic adoption because automotive production and thermoplastic automotive component production are quickly growing in those regions. However, the automotive sectors in the USA and Western Europe may not experience the same high rate of growth but are expected to develop steadily in the next 5 years, mainly due to the acceptance of new composite application. The study indicates that although gains will be limited by rising energy costs and competition from lower cost materials, there is significant opportunity in emerging economies such as China, Russia, Brazil, and India [15]. Recently, a major trend in the aerospace industry is a move toward greater use of thermoplastics vs. “traditional” thermoset epoxies. This also opens an opportunity for thermoplastics.
\nThermoplastic are the dominant plastic materials overall, especially in non-reinforced applications. Thermosets are used in non-reinforced applications for a specific purpose where they have an advantage because of some unique property. However, within the reinforced or composites marketplace, thermoset dominant and thermoplastic are used only in applications where their unique advantages are important. Within the composite market, thermoset represents about 80% of the total material used [16]. The global composite resin market size by end-use applications, in terms of value, was USD 9317.4 Million in 2014 and is projected to grow at a CAGR of 5.6% between 2015 and 2020 [17].
\nAs mentioned above, thermoplastics are capable of being repeatedly softened by the application of heat and hardened by cooling and have the potential to be the most easily recycled, which has seen them most favoured in recent commercial uptake, whereas better realisation of the fibre properties is generally achieved using thermosets. There are several types of polymers in the market. The most common polymers are summarized in Table 2 [18, 19, 20, 21, 22, 23].
\n\n | Polymers | \nDensity (g/cm3) | \nElongation (%) | \nTensile strength (MPa) | \nYoung’s modulus (GPa) | \n
---|---|---|---|---|---|
Thermoplastic | \nAcrylonitrile styrene acrylate (ASA) | \n1.0–1.1 | \n30.0 | \n43.5 | \n2.2 | \n
Acrylonitrile butadiene styrene (ABS) | \n1.0–1.1 | \n270.0 | \n47.0 | \n2.1 | \n|
Cross-linked polyethylene (PE) | \n0.9 | \n350.0 | \n18.0 | \n0.5 | \n|
Ethylene vinyl acetate (EVA) | \n0.9–1.0 | \n750.0 | \n17.0 | \n0.02 | \n|
High-density polyethylene (HDPE) | \n0.9–1.0 | \n150.0 | \n32.0–38.2 | \n1.3 | \n|
High-impact polystyrene (HIPS) | \n1.0 | \n2.5 | \n42.0 | \n2.1 | \n|
Low-density polyethylene (LDPE) | \n0.9 | \n400.0 | \n10.0–11.6 | \n0.2–0.3 | \n|
Nylon 6 (PA 6) | \n1.1 | \n60.0 | \n81.4 | \n2.8 | \n|
Nylon 66 (PA 66) | \n1.1 | \n60.0 | \n82.7 | \n2.8 | \n|
Perfluoroalkoxy (vinyl ether) | \n2.15 | \n260.0–300.0 | \n28.0–31.0 | \n0.50–0.60 | \n|
Polybutylene (PB) | \n0.95 | \n220–300 | \n29.0–35.0 | \n0.29–0.30 | \n|
Polylactic acid (PLA) | \n1.2–1.3 | \n2.1–30.7 | \n5.9–72.0 | \n1.1–3.6 | \n|
Polycarbonate (PC) | \n1.2 | \n200.0 | \n69.0 | \n2.3 | \n|
Polycaprolactone (PCL) | \n1.1 | \n700.0 | \n16.0–23.0 | \n0.4 | \n|
Polyethylene cross-linked (PEX) | \n0.92 | \n\n | 20.0 | \n\n | |
Polyethylene terephthalate (PET) | \n1.5–1.6 | \n300.0 | \n55.0–159.0 | \n2.3–9.0 | \n|
Polyether ether ketone (PEEK) | \n1.3–1.5 | \n1.6–50.0 | \n92.0–95.0 | \n3.7–24.0 | \n|
Polyether ketone (PEK) | \n1.2–1.4 | \n20.0 | \n100.0–110.0 | \n3.5 | \n|
Polyhydroxyalkanoates (PHA) | \n1.2–1.3 | \n2.0–1200.0 | \n10.0–39.0 | \n0.3–3.8 | \n|
Polyhydroxybutyrate (PHB) | \n1.2 | \n1.56–6.0 | \n24.0–40.0 | \n3.5–7.7 | \n|
Poly-3-hydroxybutyrate (P-3-HB) | \n1.3 | \n0.4–6.0 | \n40.0 | \n3.5 | \n|
Poly-3-hydroxybutyrate-co-3-hydroxyvalerate (P-3-HB-3 HV) | \n0.2–0.3 | \n1.6–20.0 | \n23.0–40.0 | \n3.5 | \n|
Poly-3-hydroxybutyrate (P-3-HB) | \n1.2 | \n1000.0 | \n104.0 | \n— | \n|
Poly(methyl methacrylate) (PMMA) | \n1.1–1.2 | \n2.5 | \n72.4 | \n3.0 | \n|
Polypropylene (PP) | \n0.9–1.3 | \n80.0 | \n35.8 | \n1.6 | \n|
Polystyrene (PS) | \n1.04 | \n1.6 | \n34.0 | \n3.0 | \n|
Polytetrafluoroethylene (PTFE) | \n2.20 | \n40.0–650.0 | \n0.862–41.4 | \n0.392–2.25 | \n|
Polyvinyl chloride (PVC) | \n1.3–1.5 | \n50.0–80.0 | \n52.0–90.0 | \n3.0–4.0 | \n|
Polyvinylidene fluoride (PVDF) | \n1.8 | \n50.0 | \n43.0 | \n2.0 | \n|
Rigid thermoplastic Polyurethane (RTPU, PUR-RT) | \n1.1 | \n5.0 | \n75.0 | \n4.0 | \n|
Thermoset | \nEpoxy (EP) | \n1.2–1.3 | \n1.3 | \n55.0–130.0 | \n2.7–4.1 | \n
Melamine formaldehyde (MF) | \n1.5–1.6 | \n0.6 | \n65.0 | \n12.0 | \n|
Phenol formaldehyde (PF) | \n1.2 | \n1.2 | \n45.0–60.0 | \n4.0–7.0 | \n|
Rigid thermoset polyurethane (RPU) | \n1.2 | \n90.0 | \n60.0 | \n2.2 | \n|
Unsaturated polyester (UPE) | \n1.1 | \n2.0 | \n34.0–105.0 | \n2.1–3.5 | \n|
Urea formaldehyde (UF) | \n1.5–1.6 | \n0.8 | \n65.0 | \n9.0 | \n|
Polyurethane rubber | \n1.2–1.3 | \n300.0–580.0 | \n39.0 | \n2.0–10.0 | \n|
\n | Vinyl ester (VE) | \n1.23 | \n2.0–12.0 | \n73.0–81.0 | \n3.0–3.5 | \n
Properties of some polymers.
Composite reinforcements can be in various forms such as fibres, flakes, or particles. Each of these has its own properties which can be contributed to the composites, and therefore, each has its own area of applications. Among the forms, fibres are the most commonly used in composite applications, and they have the most influence on the properties of the composite materials. These reasons are that the fibres have the high aspect ratio between length and diameter, which can provide effective shear stress transfer between the matrix and the fibres, and the ability to process and manufacture the composites part in various shapes using different techniques.
\nVarious types of fibres have been utilised to reinforce polymer matrix composites. The most common are carbon fibres (AS4, IM7, etc.), glass fibre (E-glass, S-glass, etc.), aramid fibres (Kevlar® and Twaron®), and boron fibres. Glass fibres have been used as reinforcement for centuries, notably by Renaissance Venetian glass workers. Commercially important continuous-glass fibre filaments were manufactured in 1937 by a joint venture between Owens-Illinois and Corning Glass. A variety of glass fibre compositions are available for different purposes as presented below. Table 3 shows compositions of some commonly used glass fibres for composite materials.
Grade A is high alkali grade glass, originally made from window glass.
Grade C is chemical-resistant grade glass for acid environments or corrosion.
Grade D is low dielectric grade glass, good transparency to radar (quartz glass).
Grade E is electrical insulation grade; this is the most common reinforcement grade.
Grade M is high modulus grade glass.
Grade R is reinforcement grade glass; this is the European equivalent of S-glass.
Grade S is high strength grade glass, a common variant is S2-glass. This fibre has higher Young’s modulus and temperature resistance than E-glass. It is also significantly more expensive.
Oxide | \nE-glass with boron | \nE-glass without boron | \nECR-glass | \nS-2 glass | \nR-glass | \nEffect on fibre properties | \n
---|---|---|---|---|---|---|
SiO2\n | \n52–56 | \n59 | \n54–62 | \n64–66 | \n60–65 | \nVery low thermal expansion | \n
Al2O3\n | \n12–16 | \n12.1–13.2 | \n9–15 | \n24–26 | \n17–24 | \nImproved chemical durability | \n
B2O3\n | \n5–10 | \n— | \n— | \n— | \n— | \nLow thermal expansion | \n
CaO | \n16–25 | \n22–23 | \n17–25 | \n— | \n5–11 | \nResistance to water, acids, and alkalis | \n
MgO | \n0–5 | \n3.1–3.4 | \n0–5 | \n8–12 | \n6–12 | \nResistance to water, acids, and alkalis | \n
ZnO | \n— | \n— | \n2.9 | \n— | \n— | \nChemical durability | \n
Na2O | \n0–1 | \n0.6–0.9 | \n1.0 | \n0–0.1 | \n0–2 | \nHigh thermal expansion, moisture sensitivity | \n
K2O | \nTrace | \n0–0.2 | \n0.2 | \n— | \n0–2 | \nHigh thermal expansion, moisture sensitivity | \n
TiO2\n | \n0.2–0.5 | \n0.5–1.5 | \n2.5 | \n— | \n— | \nImproved chemical durability especially alkali resistance | \n
Zr2O3\n | \n— | \n— | \n— | \n0–1 | \n— | \n— | \n
Li2O | \n— | \n— | \n— | \n— | \n— | \nHigh thermal expansion, moisture sensitivity | \n
Fe2O3\n | \n0.2–0.4 | \n0.2 | \n0.1 | \n0–0.1 | \n— | \nGreen colouration | \n
F2\n | \n0.2–0.7 | \n0–0.1 | \nTrace | \n— | \n— | \n— | \n
\nTable 4 presents the mechanical properties of the main grades of glass fibre for composite materials.
\nFibre | \nDensity (kg/m3) | \nYoung’s modulus (GPa) | \nVirgin filament strength (MPa) | \nRoving strength (MPa) | \nStrain to failure (%) | \n
---|---|---|---|---|---|
A (alkali) | \n2460 | \n73 | \n3100 | \n2760 | \n3.6 | \n
C (chemical) | \n2460 | \n74 | \n3100 | \n2350 | \n∼ | \n
D (dielectric) | \n2140 | \n55 | \n2500 | \n∼ | \n∼ | \n
E (electrical) | \n2550 | \n71 | \n3400 | \n2400 | \n3.37 | \n
R (reinforcement) | \n2550 | \n86 | \n4400 | \n3100 | \n5.2 | \n
S (strength) | \n2500 | \n85 | \n4580 | \n3910 | \n4.6 | \n
S2\n | \n2460 | \n90 | \n3623 | \n∼ | \n∼ | \n
S3\n | \n2830 | \n99 | \n3283 | \n∼ | \n∼ | \n
Mechanical properties of the main grades of glass fibre [24].
Carbon fibre was first invented near Cleveland, Ohio, in 1958. It wasn’t until a new manufacturing process was developed at a British research centre in 1963 that carbon fibre’s strength potential was realised [27]. The principle precursors for carbon fibres are polyacrylonitrile (PAN), pitch, cellulose (Rayon), and some other potential precursors such as lignin and polyethylene. Carbon fibres are manufactured by stretching PAN polymer precursor, melt spinning of molten pitch, and graphitization under tensile stress [28].
\nThe modulus of carbon fibres depends on the degree of perfection of the alignment. Imperfections in alignment results in complex shaped voids elongated parallel to the fibre axis, which act as stress raisers and points of weakness. The alignment varies considerably with the manufacturing route and conditions. High-modulus fibres are those which have been subjected to heat treatment in excess of 1650°C, possess three-dimensional ordering of the atoms, have carbon contents above 99% (although their graphitic structure is still less than 75%), and have a tensile modulus above 350 GPa. High-modulus, high-strength carbon fibres have diameters of 7–8 μm and consist of small crystallites of “turbostratic” graphite. The layers have no regular stacking sequence, and the average spacing between the planes is 0.34 nm. To obtain high modulus and strength, the layer planes of the graphite must be aligned parallel to the fibre axis [29]. Carbon fibres have several advantages including high stiffness, high tensile strength, low weight, high chemical resistance, and high temperature. The carbon fibres can be utilised in various applications such as aerospace, automotive, sporting goods, and consumer goods. Table 5 shows properties for the different grades of carbon fibre.
\nPrecursor | \nPAN | \nPAN | \nPitch | \nPitch | \nRayon | \nPitch (K13D2U) | \n
---|---|---|---|---|---|---|
Modulus | \nLow | \nHigh | \nLow | \nHigh | \nLow | \nUltrahigh | \n
Tensile modulus (GPa) | \n231 | \n392 | \n161 | \n385 | \n41 | \n931 | \n
Tensile strength (GPa) | \n3.4 | \n2.5 | \n1.4 | \n1.8 | \n1.1 | \n3.7 | \n
Strain to failure (%) | \n1.4 | \n0.6 | \n0.9 | \n0.4 | \n2.5 | \n0.4 | \n
Relative density | \n1.8 | \n1.9 | \n1.9 | \n2.0 | \n1.6 | \n2.2 | \n
Carbon assay (%) | \n94 | \n100 | \n97 | \n99 | \n99 | \n>99 | \n
Indicative properties for the different grades of carbon fibre [27].
Kwolek is a DuPont chemist who in 1965 invented an aramid fibre known as Kevlar, the lightweight, stronger-than-steel fibre used in bulletproof vests and other body armour around the world. The chemical structure of the materials is being alternated aromatic (aryl) benzene rings and the amide (CONH) group. The commercial name of the reinforcement’s fibres is Kevlar from DuPont and Twaron from AkzoNobel, which are believed to be poly-(para-phenylene terephthalamide). The polymer is produced by the elimination of hydrogen chloride from terephthaloyl chloride and para-phenylene diamine. The polymer is washed and dissolved in sulphuric acid to form a partially oriented liquid crystal solution. The solution is spun through small die holes, orientation taking place in the spinnerette, and the solvent is evaporated. Hull suggests that the solution is maintained between −80°C and −50°C before spinning and is extruded into a hot-walled cylinder at 200°C. Kevlar was introduced for commercial products in 1971. There are three principal types of Kevlar fibre as shown in Table 6.
\nFibre type | \n\n | E (GPa) | \nσ’ (GPa) | \nε’ (%) | \n
---|---|---|---|---|
Kevlar 29 | \nHigh-toughness, high-strength, intermediate modulus for tyre cord reinforcements | \n83 | \n3.6 | \n4.0 | \n
Kevlar 49 | \nHigh modulus high-strength for composite reinforcement | \n131 | \n3.6 | \n2.8 | \n
Kevlar 149 | \nUltra-high modulus recently introduced | \n186 | \n3.4 | \n2.0 | \n
Characteristics of the different grades of aramid fibre [27].
Recently, with advantages of reasonable mechanical properties, low density, environmental benefits, renewability, and economic feasibility, natural fibres have been paid more attention to in composite applications. The natural fibres in simple definition are fibres that are not synthetic or man-made and are categorized based on their origin from animals, mineral, or plant sources [30]. Natural fibres are one such proficient material which would be utilised to replace the synthetic materials and their related products for the applications requiring less weight and energy conservation. Natural plant fibres are entirely derived from vegetative sources and are fully biodegradable in nature. Fibre-reinforced polymer matrix got considerable attention in numerous applications because of its good properties. The current indicators are that interest in natural fibre composites by the industry will keep growing quickly around the world. The application of natural fibre-reinforced polymer composites and natural-based resins for replacing existing synthetic polymer or glass fibre-reinforced materials is huge. However, natural fibre quality is influenced significantly by the age of the plant, species, growing environment, harvesting, humidity, quality of soil, temperature, and processing steps, and there is a move to reduce the on-field processing to improve consistency and reduce costs. The properties of several natural fibres and commonly used synthetic fibres are shown in Table 7 [31, 32, 33, 34, 35].
\nFibre | \nDensity (g/cm3) | \nElongation (%) | \nTensile strength (MPa) | \nYoung’s modulus (GPa) | \n
---|---|---|---|---|
Abaca | \n1.5 | \n— | \n511.0–1051.0 | \n13.5–29.8 | \n
Alfa | \n0.89 | \n— | \n350.0 | \n22.0 | \n
Bagasse | \n1.2 | \n1.1 | \n20.0–290.0 | \n19.7–27.1 | \n
Banana | \n1.3–1.4 | \n2.0–7.0 | \n54.0–789.0 | \n3.4–32.0 | \n
Bamboo | \n1.5 | \n— | \n575.0 | \n27.0 | \n
Coconut | \n1.4–3.8 | \n— | \n120.0–200.0 | \n19.0–26.0 | \n
Coir | \n1.2 | \n15.0–30.0 | \n175.0–220.0 | \n4.0–6.0 | \n
Cotton | \n1.5–1.6 | \n3.0–10.0 | \n287.0–597.0 | \n5.5–12.6 | \n
Curaua | \n1.4 | \n— | \n825.0 | \n9.0 | \n
Flax | \n1.4–1.5 | \n1.2–3.2 | \n345.0–1500.0 | \n27.6–80.0 | \n
Hemp | \n1.4–1.5 | \n1.6 | \n550.0–900.0 | \n70.0 | \n
Henequen | \n1.4 | \n3.0–4.7 | \n430.0–580.0 | \n— | \n
Isora | \n1.2 | \n— | \n550.0 | \n— | \n
Jute | \n1.3–1.5 | \n1.5–1.8 | \n393.0–800.0 | \n10.0–30.0 | \n
Kapok | \n0.4 | \n— | \n93.3 | \n41.0 | \n
Kenaf | \n1.2 | \n2.7–6.9 | \n295.0 | \n— | \n
Palf | \n1.4 | \n3.0 | \n170.0–635.0 | \n6.2–24.6 | \n
Piassava | \n1.4 | \n— | \n138.5 | \n2.8 | \n
Pineapple | \n1.5 | \n1.0–3.0 | \n170.0–1672.0 | \n82.0 | \n
Ramie | \n1.5 | \n2.0–3.8 | \n220.0–938.0 | \n44.0–128.0 | \n
Silk | \n1.3–1.4 | \n— | \n650.0–750.0 | \n16.0 | \n
Sisal | \n1.3–1.5 | \n2.0–14.0 | \n400.0–700.0 | \n9.0–38.0 | \n
Softwood Kraft | \n1.5 | \n— | \n1000.0 | \n40.0 | \n
Wool | \n\n | \n | 120.0–174.0 | \n5.0–10.9 | \n
Properties of several natural fibres and commonly used synthetic fibres.
Increasingly, the fibres have replaced parts formerly made of steel. The fibres used in composite materials appear at different forms and scales as shown in Figure 1.
\nVarious fibre forms.
There are several methods for fabricating composite materials. The selection of a method for a part will depend on the materials, the part design, the performance, and the end-use or application.
\nHand lay-up is an open contact moulding technique for fabricating composite materials. Resins are impregnated by the hand into fibres which are in the form of woven, knitted, stitched, or bonded fabrics. In this technique, the mould is first treated with mould release, dry fibres or dry fabrics are laid on a mould, and liquid resin is then poured and spread onto the fibre beds [36]. This is usually accomplished by rollers or brushes, with an increasing use of nip-roller-type impregnators for forcing resin into the fabrics by means of rotating rollers and a bath of resin. A roller or brush is used to wet the fibres and remove air trapped into the lay-ups. A few layers of fibres are wetted, and laminates are left to cure under standard atmospheric conditions. After these layers are cured, more layers are added, as shown in Figure 2.
\nHand lay-up process.
Spray-up is also an open-mould application technique for composite. The spray lay-up technique is considered an extension of the hand lay-up method. In this process, the mould is first treated with mould release. If a gel coat is used, it is sprayed into the mould at a certain thickness after the mould release has been applied. The gel coat then is cured, and the mould is ready for process. The fibre and catalysed resin at a viscosity of 500–1000 cps are sprayed into the mould using a chopper spray gun. The gun chops continuous fibre tow into short-fibre bundle lengths and then blows the short fibres directly into the sprayed resin stream so that both materials are applied simultaneously on the surface of the mould, as shown in Figure 3. In the final steps of the spray-up process, the workers compact the laminate by hand with rollers. The composite part is then cured, cooled, and removed from the mould [37, 38].
\nThe schematic of the spray lay-up process.
Hand lay-up and spray-up methods are often used in tandem to reduce labour cost. This is a common process for making glass fibre composite products such as bathtubs, boat hulls and decks, fenders, RV components, shower stalls, spas, truck cabs, and other relatively large and noncomplex shapes.
\nWith the ever-increasing demand for faster production rates, the industry has used alternative fabrication processes to replace hand lay-up as well as encouraged fabricators to automate those processes wherever possible.
\nResin transfer moulding (RTM), sometimes referred to as liquid moulding, is a fairly simple process. In this technique, the mould is first treated with mould release. The dry reinforcement, typically a preform, is then placed into the mould and the mould is closed. Low viscosity resin and catalyst are metered and mixed and then pumped into the mould under low-to-moderate pressure through injection ports, following predesigned paths through the preform. Low-viscosity resin is used in RTM technique to ensure that the resin permeates through the preform quickly and thoroughly before gel and cure, especially with thick composite parts.
\nReaction injection moulding (RIM) injects a rapid cure resin and a catalyst into the mould in two separate streams. Mixing and chemical reaction occur in the mould instead of in a dispensing head. Automotive industry suppliers have combined structural RIM (SRIM) with rapid preforming methods to fabricate structural parts that do not require a class A finish. Figure 4 describes the schematic of the RTM process [39, 40].
\nThe schematic of the RTM process.
Representing the fastest-growing moulding technology is vacuum-assisted resin transfer moulding (VARTM), as shown in Figure 5. The difference between VARTM and RTM is that in VARTM, resin is drawn into a preform use a vacuum only, rather than pumped in under pressure as RTM. VARTM technique does not require high heat or pressure. VARTM usually operates with low-cost tooling, making it possible to inexpensively produce large, complex parts in one shot [41, 42, 43].
\nThe schematic of the VARTM process.
Resin film infusion (RFI) is a hybrid process in which a dry preform is placed in a mould on top of a layer, or interleaved with multiple layers, of high-viscosity resin film. Under applied heat, vacuum, and pressure, the resin liquefies and is drawn into the preform, resulting in uniform resin distribution, even with high-viscosity, toughened resins, because of the short flow distance. Using the resin infusion techniques, the fibre volumes can be up to 70%, and automated controls ensure low voids and consistent preform reproduction, without the need for trimming. Resin infusion has found significant application in boatbuilding. This method has been employed by The Boeing Co. (Chicago, IL, USA) and NASA, as well as small fabricating firms, to produce aerospace-quality laminates without an autoclave [36, 44]. Figure 6 presents the schematic of the resin film infusion process.
\nThe schematic of the resin film infusion process.
Compression moulding is a precise and potentially rapid process for producing high-quality composite parts in a wide range of volumes. The material is manually or robotically placed in the mould. The mould halves are closed, and pressure is applied using hydraulic presses. Cycle time ranges depending on the part size and thickness. This process produces high-strength, complex parts in a wide variety of sizes. The composites are commonly processed by compression moulding and include thermosetting prepregs, fibre-reinforced thermoplastic, moulding compounds such as sheet moulding compound (SMC), bulk moulding compounds (BMC), and chopped thermoplastic tapes. Figure 7 shows the schematic of the compression moulding process.
\nThe schematic of compression moulding process.
Injection moulding is a closed process as shown in Figure 8. This is fast, high-volume, low-pressure, and most commonly used for filled thermoplastics, such as nylon with chopped glass fibre. The injection-moulding process has been in use for nearly 150 years. Reciprocating screw injection-moulding machines were introduced in the 1960s and are still used today [45]. Injection speeds are typically one to a few seconds, and many parts can be produced per hour in some multiple cavity moulds.
\nSimplified diagram of moulding process.
Filament winding is a continuous fabrication method that can be highly automated and repeatable, with relatively low material costs as shown in Figure 9. A long, cylindrical tool called a mandrel is suspended horizontally between end supports. Dry fibres are run through a bath of resin to be wetted. The fibre application instrument moves back and forth along the length of a rotating mandrel with the traverse carriage, placing fibre onto the tool in a predetermined configuration. Computer-controlled filament-winding machines are used to arrange the axes of motion [46, 47, 48]. Filament winding is one example of aerospace composite materials.
\nThe schematic of the filament winding process.
Composite pultrusion is a processing method for producing continuous lengths of fibre-reinforced polymer structural shapes with constant cross-sections. This is a continuous fabrication method that can be highly automated. In this process, a continuous bundle of dry fibre is pulled through a heated resin-wetting station. The wetted bundle is pulled into heated dies, and the cross-sectional shape of the pulled fibre is formed by these dies. The resin is cured, and the composites are formed. Parts are then made by slicing the long-cured piece. This process is limited to straight parts with a constant cross-section, such as I-beams, T-beams, or frame sections and ladder rails. Figure 10 shows the schematic of the pultrusion process [49, 50]. Pultrusion is used in the manufacture of linear components such as ladders and mouldings.
\nThe schematic of the pultrusion process.
Automated fibre placement (AFP) is one of the most advanced methods for fabricating and manufacturing of composite materials as presented in Figure 11. This method is used almost exclusively with continuous fibre-reinforced tape. A robot is utilised to place fibre-reinforced tape and build a structure one ply (layer) at a time. A band of material comprised of multiple narrow strips of tape (tows) is placed where these tows are commonly 0.125 and 0.25 inches wide. The use of robotics gives the operator active control over all the processes critical variables, making the process highly controllable and repeatable. This method allows the fabrication of highly customised parts as each ply can be placed at different angles to best carry the required loads [51, 52].
\nThe schematic of the automated fibre placement process.
Advantages of fibre placement are processing speed and reduced material scrap and labour costs. Often, the process is utilised to fabricate large thermoset parts with complex shapes. Similar to ATP process, automated tape laying (ATL) is an even speedier automated process in which prepreg tape, rather than single tows, is laid down continuously to form parts.
\nAdditive manufacturing is also known as 3D printing technique. Additive manufacturing is a step change in the development of rapid prototyping concepts that were introduced more than 20 years ago. This is a process for making a solid object from a three-dimensional digital model, typically by laying down many successive thin layers of a material. Manufacturing a composite structure with a single nozzle uses polymer composite filament and contains polymer and additives such as rubber microspheres, particles of glass or carbon fibre, wood flour, etc. as shown in Figure 12. This more recent form of composite part production grew out of efforts to reduce the costs in the design-to-prototype phase of product development, taking aim particularly at the material-, labour-, and time-intensive area of toolmaking [53, 54, 55, 56].
\nThe schematic of the 3D printing process for polymer composites.
The polymer composite materials are lightweight, which increases the fuel efficiency of vehicles manufactured from composites and gives them structural stability. In addition, they offer a high strength-to-weight ratio and increased heat resistance. Composites have very different properties and applications depending on the type of matrix, reinforcement, ratio between them, formulations, processing etc. The bonding strength between fibre and polymer matrix in the composite is considered one of the major factors in order to obtain superior fibre reinforcement polymer composite properties. Typical properties of several polymer composites are presented in Table 8 [57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71].
\nComposite | \nDensity (g/cm3) | \nElongation (%) | \nTensile strength (MPa) | \nYoung’s modulus (GPa) | \n
---|---|---|---|---|
ABS + 30% glass fibre | \n— | \n2.0 | \n60.0 | \n9.0 | \n
Acetal copolymer + 30% glass fibre | \n— | \n3.0 | \n110.0 | \n9.5 | \n
Epoxy + 40–60% carbon fibre | \n1.15–2.25 | \n0.4–11.0 | \n4.6–3220.0 | \n2.6–520.0 | \n
Epoxy + 45% flax yarn-aligned | \n— | \n— | \n133.0 | \n28.0 | \n
Epoxy + 40% glass fibre | \n— | \n— | \n— | \n— | \n
Epoxy + 52% jute fibre | \n— | \n— | \n216.0 | \n31.0 | \n
Epoxy + 52% kevlar fibre | \n— | \n— | \n434.0 | \n28.2 | \n
PEEK + 62% carbon fibre | \n1.60 | \n— | \n750.0 | \n50.0 | \n
PEEK + kevlar fibre | \n1.31–1.50 | \n1.0–6.0 | \n75.0–193.0 | \n4.0–20.7 | \n
Nylon 66 + 25–30% carbon fibre | \n1.20–1.57 | \n0.90–4.0 | \n193.0–261.0 | \n16.0–33.1 | \n
Nylon 6 + 40% glass fibre | \n1.45 | \n2.0–3.0 | \n235.0 | \n12.9 | \n
Nylon + kevlar fibre | \n1.16 | \n4.0 | \n110.0 | \n9.0 | \n
PLA + 30% abaca fibre | \n— | \n— | \n74.0 | \n8.0 | \n
PLA + 20% bamboo fibre | \n— | \n— | \n90.0 | \n1.8 | \n
PLA + 30% flax fibre | \n— | \n— | \n53.0–100.0 | \n8.0 | \n
PF + E glass fibre | \n1.5–1.65 | \n— | \n85.0–330.0 | \n5.0–17.0 | \n
Polycarbonate + 5–40% carbon fibre | \n1.15–1.43 | \n0.9–118.0 | \n46.0–186.0 | \n2.1–25.5 | \n
Polycarbonate + 30–40% glass fibre | \n1.44–1.52 | \n4.0 | \n107.0–159.0 | \n10.0–11.6 | \n
Polycarbonate-ABS + 30% glass fibre | \n1.29 | \n— | \n82.7 | \n— | \n
Polyimide + 20–30% carbon fibre | \n1.38–1.68 | \n0.8–5.5 | \n36.5–241.0 | \n4.5–29.0 | \n
Polyimide + glass fibre | \n— | \n2.0 | \n150.0 | \n12.0 | \n
PP + 30% carbon fibre | \n1.07 | \n1.0 | \n117.0 | \n16.2 | \n
PP + 30% cotton fibre | \n— | \n— | \n58.5 | \n4.1 | \n
PP + 20% glass-chopped strand mat | \n— | \n— | \n77.0 | \n5.4 | \n
PP + 20% glass fibre | \n1.03 | \n3.0–4.0 | \n100.0 | \n4.3 | \n
PP + 40% glass fibre | \n1.22 | \n2.0 | \n127.0 | \n7.6 | \n
PP-MAgPP + 40% hemp fibre | \n— | \n— | \n52.0 | \n4.0 | \n
UPE + 35% jute fibre | \n— | \n— | \n50.0 | \n8.0 | \n
UPE + 47% glass fibre | \n— | \n— | \n201.0 | \n13.0 | \n
Vinylester + carbon fibre | \n1.50–1.65 | \n1.4 | \n900.0–1200.0 | \n136.0 | \n
Vinylester + 24% flax fibre | \n— | \n— | \n248.0 | \n24.0 | \n
Vinylester + 59% glass fibre | \n— | \n— | \n483.0 | \n33.0 | \n
Vinylester + kevlar fibre | \n1.35 | \n— | \n500.0 | \n40.0 | \n
Properties of several fibre-reinforced polymer composites.
The growth of the composites market can be attributed to increased uses in the aerospace, defence, and transportation applications. The global composite materials market is expected to reach an estimated $40.2 billion by 2024, and it is forecasted to grow at a CAGR of 3.3% from 2019 to 2024. The global composite product market is expected to reach an estimated $114.7 billion by 2024 [72].
\nThe most widely used form of fibre-reinforced polymer is a laminar structure, made by stacking and bonding thin layers of fibre and polymer until the desired thickness is obtained. By changing the fibre orientation among layers in the laminate structures, a specified level of anisotropy in composite properties can be achieved. Composites offer many benefits such as corrosion resistance, light weight, strength, lower material costs, improved productivity, design flexibility, and durability. Therefore, the wide range of industries uses composite materials and some of their common applications [3, 15].
\nThe major original equipment manufacturers (OEMs) such as Airbus and Boeing have shown the potential of using composite materials for large-scale applications in aviation. NASA is continually looking to composite manufacturers for innovative approaches and space solutions for rockets and other spacecrafts. Composites with thermoset are being specified for bulkheads, fuselages, wings, and other applications in commercial, civilian, and military aerospace applications. There are several other applications of composites in the areas such as air-foil surfaces, antenna structures, compressor blades, engine bay doors, fan blades, flywheels, helicopter transmission structures, jet engines, radar, rocket engines, solar reflectors, satellite structures, turbine blades, turbine shafts, rotor shafts in helicopters, wing box structures, etc. [3, 15, 26, 37]
\nComposite materials offer flexibility in design and processing; therefore composite materials can be used as alternatives for metal alloys in appliances. Unlike most other industries, trends within the appliance segment move quite quickly. In addition, design and function are subject to both technology advancements and changing consumer taste. Composite materials are being used in appliance and business equipment such as equipment panels, frames, handles and trims in appliances, power tools, and many other applications. Composites are being utilised for the appliance industry in dishwashers, dryers, freezers, ovens, ranges, refrigerators, and washers. The components in the equipment that were utilised composites include consoles, control panels, handles, kick plates, knobs, motor housings, shelf brackets, side trims, vent trims, and many others [3, 73].
\nWith their aesthetic qualities, functionality, and versatility, the composite materials are becoming the material of choice for architectural applications. Composite materials allow architects to create designs that are impractical or impossible with traditional materials, improve thermal performance and energy efficiency of building materials, and meet building code requirements. Composite materials also offer design flexibility and can be moulded into complex shapes. They can be corrugated, curved, ribbed, or contoured in a variety of ways with varying thickness. Further, a traditional look such as copper, chrome or gold, marble, and stone can be achieved at a fraction of the cost using composite materials. Therefore, the architecture community is experiencing substantial growth in the understanding and use of composites in commercial and residential buildings [15].
\nThe automotive industry is no stranger to composites. This is one of the largest markets for composite materials. Weight reduction is the greatest advantage of composite material usage. A lower-weight vehicle or truck is more fuel-efficient because it requires less fuel to propel itself forward. In addition to enabling ground breaking vehicle designs, composites help make vehicles lighter and more fuel efficient. The composite materials are used in bearing materials, bodies, connecting rod, crankshafts, cylinder, engines, piston, etc. While fibre-reinforced polymers such as CFRP in cars get most of the attention, composites also play a big role in increasing fuel efficiency in trucks and transport systems. A number of US state Departments of Transportation are also using composite to reinforce the bridges those trucks travel on [3, 26, 37].
\nConstruction is one of the largest markets for composites globally. The composites can be made to have a very high strength and ideal construction materials. Thermoset composites are replacing many traditional materials for home and offices’ architectural components including doors, fixtures, moulding, roofing, shower stalls, swimming pools, vanity sinks, wall panels, and window frames. Composites are used all over the world to help construct and repair a wide variety of infrastructure applications, from buildings and bridges to roads, railways, and pilings [3, 74].
\nProducts made from composite materials provide long-term resistance to severe chemical conditions and temperature environments. Composites are often the material of choice for applications in chemical handling applications, corrosive environments, outdoor exposure, and other severe environments such as chemical processing plants, oil and gas refineries, pulp and paper converting, and water treatment facilities. Common applications include cabinets, ducts, fans, grating, hoods, pumps, and tanks [3, 37, 73]. Fibre-reinforced polymer composite pipes are used for everything from sewer upgrades and wastewater projects to desalination, oil, and gas applications. When corrosion becomes a problem with pipes made with traditional materials, fibre-reinforced polymer is a solution [3, 73].
\nWith the rapid growth of the electronics industry, and with strong dielectric properties including arc and track resistance, the composite materials are finding more and more in electronic applications. With strong dielectric properties including arc and track resistance, thermoset components include. Applications and components include arc chutes, arc shields, bus supports and lighting components, circuit breakers, control system components, metering devices, microwave antennas, motor controls, standoff insulators, standoffs and pole line hardware and printed wiring boards, substation equipment, switchgear, terminal blocks, and terminal boards [3, 75].
\nMaterial technology has grown from the early days of glass fibres as major reinforcements for composite material to carbon fibres which are lighter and stronger. The advancements in composites, particularly those from the US Department of Energy, are redefining the energy industry. Composites help enable the use of wind and solar power and improve the efficiency of traditional energy suppliers. Composite materials offer wind manufacturers strength and flexibility in processing with the added benefit of a lightweight components and products [3, 76]. The wind industry has set installation records over the last couple years. According to the Global Wind Energy Council, the trend for this industry may continue with global wind capacity predicted to double in the next few years. Composites play a vital role in the manufacture of structures such as wind turbine blades [3, 77].
\nJust like in the other engineering areas, the main struggle of naval architecture is to achieve a structure as light as possible. The marine industry uses composites to help make hulls lighter and more damage-resistant. With their corrosion resistance and light-weighting attributes, marine composite applications include boat hulls, bulkheads, deck, mast, propeller, and other components for military, commercial, and recreational boats and ships. Composites can be found in many more areas of a maritime vessel, including interior mouldings and furniture on super yachts [3, 78, 79].
\nThe fibre-reinforced composite materials possess some excellent characteristics, including easy moulding, high elastic modulus, high strength, light in weight, good corrosion resistance, and so on. Therefore, fibre-reinforced composite materials have extensive applications in production the manufacturing of sports equipment. From bicycle frames, bobsleds fishing poles, football helmets, hockey sticks, horizontal bars, jumping board, kayaks, parallel bars, props, tennis rackets, to rowing, carbon fibres, and fibreglass composite materials help athletes reach their highest performance capabilities and provide durable and lightweight equipment [3, 80].
\nComposites have many advantages; a wide range of material combinations can be used in composites, which allows for design flexibility. The composites also can be easily moulded into complicated shapes. The materials can be custom tailored to fit unique specifications. Composites are light in weight compared to most woods and metals and lower density as compared to many metals. They are stronger than some other materials. The materials resist damage from weather and harsh chemicals. Composites have a long service life and require little maintenance. Due to the wide variety of available reinforcement, matrix, and their forms, manufacturing processes, and each resulting in their own characteristic composite products, the design possibilities for composite products are numerous. Therefore, a composite and its manufacturing process can be chosen to best fit the developing rural societies in which the products will be made and applied. Composite materials’ research continues. The areas of interest are nanomaterials—materials with extremely small molecular structures and bio-based polymers. To facilitate the advantages of the composites, several aspects must be considered: (a) concept development, (b) material selection and formulation, (c) material design, (d) product manufacturing, (e) market, and (f) regulations.
\nThe author acknowledges Mrs. Marian Parslow and Mrs. Laura Parslow for helping in editing of the chapter.
\nYou have been successfully unsubscribed.
",metaTitle:"Unsubscribe Successful",metaDescription:"You have been successfully unsubscribed.",metaKeywords:null,canonicalURL:"/page/unsubscribe-successful",contentRaw:'[{"type":"htmlEditorComponent","content":""}]'},components:[{type:"htmlEditorComponent",content:""}]},successStories:{items:[]},authorsAndEditors:{filterParams:{sort:"featured,name"},profiles:[{id:"6700",title:"Dr.",name:"Abbass A.",middleName:null,surname:"Hashim",slug:"abbass-a.-hashim",fullName:"Abbass A. Hashim",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/6700/images/1864_n.jpg",biography:"Currently I am carrying out research in several areas of interest, mainly covering work on chemical and bio-sensors, semiconductor thin film device fabrication and characterisation.\nAt the moment I have very strong interest in radiation environmental pollution and bacteriology treatment. The teams of researchers are working very hard to bring novel results in this field. I am also a member of the team in charge for the supervision of Ph.D. students in the fields of development of silicon based planar waveguide sensor devices, study of inelastic electron tunnelling in planar tunnelling nanostructures for sensing applications and development of organotellurium(IV) compounds for semiconductor applications. I am a specialist in data analysis techniques and nanosurface structure. I have served as the editor for many books, been a member of the editorial board in science journals, have published many papers and hold many patents.",institutionString:null,institution:{name:"Sheffield Hallam University",country:{name:"United Kingdom"}}},{id:"54525",title:"Prof.",name:"Abdul Latif",middleName:null,surname:"Ahmad",slug:"abdul-latif-ahmad",fullName:"Abdul Latif Ahmad",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"20567",title:"Prof.",name:"Ado",middleName:null,surname:"Jorio",slug:"ado-jorio",fullName:"Ado Jorio",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universidade Federal de Minas Gerais",country:{name:"Brazil"}}},{id:"47940",title:"Dr.",name:"Alberto",middleName:null,surname:"Mantovani",slug:"alberto-mantovani",fullName:"Alberto Mantovani",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"12392",title:"Mr.",name:"Alex",middleName:null,surname:"Lazinica",slug:"alex-lazinica",fullName:"Alex Lazinica",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/12392/images/7282_n.png",biography:"Alex Lazinica is the founder and CEO of IntechOpen. After obtaining a Master's degree in Mechanical Engineering, he continued his PhD studies in Robotics at the Vienna University of Technology. Here he worked as a robotic researcher with the university's Intelligent Manufacturing Systems Group as well as a guest researcher at various European universities, including the Swiss Federal Institute of Technology Lausanne (EPFL). During this time he published more than 20 scientific papers, gave presentations, served as a reviewer for major robotic journals and conferences and most importantly he co-founded and built the International Journal of Advanced Robotic Systems- world's first Open Access journal in the field of robotics. Starting this journal was a pivotal point in his career, since it was a pathway to founding IntechOpen - Open Access publisher focused on addressing academic researchers needs. Alex is a personification of IntechOpen key values being trusted, open and entrepreneurial. Today his focus is on defining the growth and development strategy for the company.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"19816",title:"Prof.",name:"Alexander",middleName:null,surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/19816/images/1607_n.jpg",biography:"Alexander I. Kokorin: born: 1947, Moscow; DSc., PhD; Principal Research Fellow (Research Professor) of Department of Kinetics and Catalysis, N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, Moscow.\r\nArea of research interests: physical chemistry of complex-organized molecular and nanosized systems, including polymer-metal complexes; the surface of doped oxide semiconductors. He is an expert in structural, absorptive, catalytic and photocatalytic properties, in structural organization and dynamic features of ionic liquids, in magnetic interactions between paramagnetic centers. The author or co-author of 3 books, over 200 articles and reviews in scientific journals and books. He is an actual member of the International EPR/ESR Society, European Society on Quantum Solar Energy Conversion, Moscow House of Scientists, of the Board of Moscow Physical Society.",institutionString:null,institution:{name:"Semenov Institute of Chemical Physics",country:{name:"Russia"}}},{id:"62389",title:"PhD.",name:"Ali Demir",middleName:null,surname:"Sezer",slug:"ali-demir-sezer",fullName:"Ali Demir Sezer",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/62389/images/3413_n.jpg",biography:"Dr. Ali Demir Sezer has a Ph.D. from Pharmaceutical Biotechnology at the Faculty of Pharmacy, University of Marmara (Turkey). He is the member of many Pharmaceutical Associations and acts as a reviewer of scientific journals and European projects under different research areas such as: drug delivery systems, nanotechnology and pharmaceutical biotechnology. Dr. Sezer is the author of many scientific publications in peer-reviewed journals and poster communications. Focus of his research activity is drug delivery, physico-chemical characterization and biological evaluation of biopolymers micro and nanoparticles as modified drug delivery system, and colloidal drug carriers (liposomes, nanoparticles etc.).",institutionString:null,institution:{name:"Marmara University",country:{name:"Turkey"}}},{id:"61051",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"100762",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"St David's Medical Center",country:{name:"United States of America"}}},{id:"107416",title:"Dr.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Texas Cardiac Arrhythmia",country:{name:"United States of America"}}},{id:"64434",title:"Dr.",name:"Angkoon",middleName:null,surname:"Phinyomark",slug:"angkoon-phinyomark",fullName:"Angkoon Phinyomark",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/64434/images/2619_n.jpg",biography:"My name is Angkoon Phinyomark. I received a B.Eng. degree in Computer Engineering with First Class Honors in 2008 from Prince of Songkla University, Songkhla, Thailand, where I received a Ph.D. degree in Electrical Engineering. My research interests are primarily in the area of biomedical signal processing and classification notably EMG (electromyography signal), EOG (electrooculography signal), and EEG (electroencephalography signal), image analysis notably breast cancer analysis and optical coherence tomography, and rehabilitation engineering. I became a student member of IEEE in 2008. During October 2011-March 2012, I had worked at School of Computer Science and Electronic Engineering, University of Essex, Colchester, Essex, United Kingdom. In addition, during a B.Eng. I had been a visiting research student at Faculty of Computer Science, University of Murcia, Murcia, Spain for three months.\n\nI have published over 40 papers during 5 years in refereed journals, books, and conference proceedings in the areas of electro-physiological signals processing and classification, notably EMG and EOG signals, fractal analysis, wavelet analysis, texture analysis, feature extraction and machine learning algorithms, and assistive and rehabilitative devices. I have several computer programming language certificates, i.e. Sun Certified Programmer for the Java 2 Platform 1.4 (SCJP), Microsoft Certified Professional Developer, Web Developer (MCPD), Microsoft Certified Technology Specialist, .NET Framework 2.0 Web (MCTS). I am a Reviewer for several refereed journals and international conferences, such as IEEE Transactions on Biomedical Engineering, IEEE Transactions on Industrial Electronics, Optic Letters, Measurement Science Review, and also a member of the International Advisory Committee for 2012 IEEE Business Engineering and Industrial Applications and 2012 IEEE Symposium on Business, Engineering and Industrial Applications.",institutionString:null,institution:{name:"Joseph Fourier University",country:{name:"France"}}},{id:"55578",title:"Dr.",name:"Antonio",middleName:null,surname:"Jurado-Navas",slug:"antonio-jurado-navas",fullName:"Antonio Jurado-Navas",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/55578/images/4574_n.png",biography:"Antonio Jurado-Navas received the M.S. degree (2002) and the Ph.D. degree (2009) in Telecommunication Engineering, both from the University of Málaga (Spain). He first worked as a consultant at Vodafone-Spain. From 2004 to 2011, he was a Research Assistant with the Communications Engineering Department at the University of Málaga. In 2011, he became an Assistant Professor in the same department. From 2012 to 2015, he was with Ericsson Spain, where he was working on geo-location\ntools for third generation mobile networks. Since 2015, he is a Marie-Curie fellow at the Denmark Technical University. His current research interests include the areas of mobile communication systems and channel modeling in addition to atmospheric optical communications, adaptive optics and statistics",institutionString:null,institution:{name:"University of Malaga",country:{name:"Spain"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:5681},{group:"region",caption:"Middle and South America",value:2,count:5160},{group:"region",caption:"Africa",value:3,count:1683},{group:"region",caption:"Asia",value:4,count:10200},{group:"region",caption:"Australia and Oceania",value:5,count:886},{group:"region",caption:"Europe",value:6,count:15608}],offset:12,limit:12,total:117095},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{sort:"dateendthirdsteppublish"},books:[],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:9},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:18},{group:"topic",caption:"Business, Management and Economics",value:7,count:2},{group:"topic",caption:"Chemistry",value:8,count:8},{group:"topic",caption:"Computer and Information Science",value:9,count:12},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:5},{group:"topic",caption:"Engineering",value:11,count:17},{group:"topic",caption:"Environmental Sciences",value:12,count:2},{group:"topic",caption:"Immunology and Microbiology",value:13,count:6},{group:"topic",caption:"Materials Science",value:14,count:5},{group:"topic",caption:"Mathematics",value:15,count:1},{group:"topic",caption:"Medicine",value:16,count:69},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:1},{group:"topic",caption:"Neuroscience",value:18,count:1},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:6},{group:"topic",caption:"Physics",value:20,count:2},{group:"topic",caption:"Psychology",value:21,count:2},{group:"topic",caption:"Robotics",value:22,count:2},{group:"topic",caption:"Social Sciences",value:23,count:3},{group:"topic",caption:"Technology",value:24,count:1},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:2}],offset:0,limit:12,total:null},popularBooks:{featuredBooks:[{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7769",title:"Medical Isotopes",subtitle:null,isOpenForSubmission:!1,hash:"f8d3c5a6c9a42398e56b4e82264753f7",slug:"medical-isotopes",bookSignature:"Syed Ali Raza Naqvi and Muhammad Babar Imrani",coverURL:"https://cdn.intechopen.com/books/images_new/7769.jpg",editors:[{id:"259190",title:"Dr.",name:"Syed Ali Raza",middleName:null,surname:"Naqvi",slug:"syed-ali-raza-naqvi",fullName:"Syed Ali Raza Naqvi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9376",title:"Contemporary Developments and Perspectives in International Health Security",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"b9a00b84cd04aae458fb1d6c65795601",slug:"contemporary-developments-and-perspectives-in-international-health-security-volume-1",bookSignature:"Stanislaw P. Stawicki, Michael S. Firstenberg, Sagar C. Galwankar, Ricardo Izurieta and Thomas Papadimos",coverURL:"https://cdn.intechopen.com/books/images_new/9376.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9279",title:"Concepts, Applications and Emerging Opportunities in Industrial Engineering",subtitle:null,isOpenForSubmission:!1,hash:"9bfa87f9b627a5468b7c1e30b0eea07a",slug:"concepts-applications-and-emerging-opportunities-in-industrial-engineering",bookSignature:"Gary Moynihan",coverURL:"https://cdn.intechopen.com/books/images_new/9279.jpg",editors:[{id:"16974",title:"Dr.",name:"Gary",middleName:null,surname:"Moynihan",slug:"gary-moynihan",fullName:"Gary Moynihan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7807",title:"A Closer Look at Organizational Culture in Action",subtitle:null,isOpenForSubmission:!1,hash:"05c608b9271cc2bc711f4b28748b247b",slug:"a-closer-look-at-organizational-culture-in-action",bookSignature:"Süleyman Davut Göker",coverURL:"https://cdn.intechopen.com/books/images_new/7807.jpg",editors:[{id:"190035",title:"Associate Prof.",name:"Süleyman Davut",middleName:null,surname:"Göker",slug:"suleyman-davut-goker",fullName:"Süleyman Davut Göker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7796",title:"Human 4.0",subtitle:"From Biology to Cybernetic",isOpenForSubmission:!1,hash:"5ac5c052d3a593d5c4f4df66d005e5af",slug:"human-4-0-from-biology-to-cybernetic",bookSignature:"Yves Rybarczyk",coverURL:"https://cdn.intechopen.com/books/images_new/7796.jpg",editors:[{id:"72920",title:"Prof.",name:"Yves",middleName:"Philippe",surname:"Rybarczyk",slug:"yves-rybarczyk",fullName:"Yves Rybarczyk"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9711",title:"Pests, Weeds and Diseases in Agricultural Crop and Animal Husbandry Production",subtitle:null,isOpenForSubmission:!1,hash:"12cf675f1e433135dd5bf5df7cec124f",slug:"pests-weeds-and-diseases-in-agricultural-crop-and-animal-husbandry-production",bookSignature:"Dimitrios Kontogiannatos, Anna Kourti and Kassio Ferreira Mendes",coverURL:"https://cdn.intechopen.com/books/images_new/9711.jpg",editors:[{id:"196691",title:"Dr.",name:"Dimitrios",middleName:null,surname:"Kontogiannatos",slug:"dimitrios-kontogiannatos",fullName:"Dimitrios Kontogiannatos"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10178",title:"Environmental Emissions",subtitle:null,isOpenForSubmission:!1,hash:"febf21ec717bfe20ae25a9dab9b5d438",slug:"environmental-emissions",bookSignature:"Richard Viskup",coverURL:"https://cdn.intechopen.com/books/images_new/10178.jpg",editors:[{id:"103742",title:"Dr.",name:"Richard",middleName:null,surname:"Viskup",slug:"richard-viskup",fullName:"Richard Viskup"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8511",title:"Cyberspace",subtitle:null,isOpenForSubmission:!1,hash:"8c1cdeb133dbe6cc1151367061c1bba6",slug:"cyberspace",bookSignature:"Evon Abu-Taieh, Abdelkrim El Mouatasim and Issam H. Al Hadid",coverURL:"https://cdn.intechopen.com/books/images_new/8511.jpg",editors:[{id:"223522",title:"Dr.",name:"Evon",middleName:"M.O.",surname:"Abu-Taieh",slug:"evon-abu-taieh",fullName:"Evon Abu-Taieh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9534",title:"Banking and Finance",subtitle:null,isOpenForSubmission:!1,hash:"af14229738af402c3b595d7e124dce82",slug:"banking-and-finance",bookSignature:"Razali Haron, Maizaitulaidawati Md Husin and Michael Murg",coverURL:"https://cdn.intechopen.com/books/images_new/9534.jpg",editors:[{id:"206517",title:"Prof.",name:"Razali",middleName:null,surname:"Haron",slug:"razali-haron",fullName:"Razali Haron"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"2160",title:"MATLAB",subtitle:"A Fundamental Tool for Scientific Computing and Engineering Applications - Volume 1",isOpenForSubmission:!1,hash:"dd9c658341fbd264ed4f8d9e6aa8ca29",slug:"matlab-a-fundamental-tool-for-scientific-computing-and-engineering-applications-volume-1",bookSignature:"Vasilios N. Katsikis",coverURL:"https://cdn.intechopen.com/books/images_new/2160.jpg",editors:[{id:"12289",title:"Prof.",name:"Vasilios",middleName:"N.",surname:"Katsikis",slug:"vasilios-katsikis",fullName:"Vasilios Katsikis"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:5124},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7769",title:"Medical Isotopes",subtitle:null,isOpenForSubmission:!1,hash:"f8d3c5a6c9a42398e56b4e82264753f7",slug:"medical-isotopes",bookSignature:"Syed Ali Raza Naqvi and Muhammad Babar Imrani",coverURL:"https://cdn.intechopen.com/books/images_new/7769.jpg",editors:[{id:"259190",title:"Dr.",name:"Syed Ali Raza",middleName:null,surname:"Naqvi",slug:"syed-ali-raza-naqvi",fullName:"Syed Ali Raza Naqvi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9376",title:"Contemporary Developments and Perspectives in International Health Security",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"b9a00b84cd04aae458fb1d6c65795601",slug:"contemporary-developments-and-perspectives-in-international-health-security-volume-1",bookSignature:"Stanislaw P. Stawicki, Michael S. Firstenberg, Sagar C. Galwankar, Ricardo Izurieta and Thomas Papadimos",coverURL:"https://cdn.intechopen.com/books/images_new/9376.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9279",title:"Concepts, Applications and Emerging Opportunities in Industrial Engineering",subtitle:null,isOpenForSubmission:!1,hash:"9bfa87f9b627a5468b7c1e30b0eea07a",slug:"concepts-applications-and-emerging-opportunities-in-industrial-engineering",bookSignature:"Gary Moynihan",coverURL:"https://cdn.intechopen.com/books/images_new/9279.jpg",editors:[{id:"16974",title:"Dr.",name:"Gary",middleName:null,surname:"Moynihan",slug:"gary-moynihan",fullName:"Gary Moynihan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7807",title:"A Closer Look at Organizational Culture in Action",subtitle:null,isOpenForSubmission:!1,hash:"05c608b9271cc2bc711f4b28748b247b",slug:"a-closer-look-at-organizational-culture-in-action",bookSignature:"Süleyman Davut Göker",coverURL:"https://cdn.intechopen.com/books/images_new/7807.jpg",editors:[{id:"190035",title:"Associate Prof.",name:"Süleyman Davut",middleName:null,surname:"Göker",slug:"suleyman-davut-goker",fullName:"Süleyman Davut Göker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7796",title:"Human 4.0",subtitle:"From Biology to Cybernetic",isOpenForSubmission:!1,hash:"5ac5c052d3a593d5c4f4df66d005e5af",slug:"human-4-0-from-biology-to-cybernetic",bookSignature:"Yves Rybarczyk",coverURL:"https://cdn.intechopen.com/books/images_new/7796.jpg",editors:[{id:"72920",title:"Prof.",name:"Yves",middleName:"Philippe",surname:"Rybarczyk",slug:"yves-rybarczyk",fullName:"Yves Rybarczyk"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9711",title:"Pests, Weeds and Diseases in Agricultural Crop and Animal Husbandry Production",subtitle:null,isOpenForSubmission:!1,hash:"12cf675f1e433135dd5bf5df7cec124f",slug:"pests-weeds-and-diseases-in-agricultural-crop-and-animal-husbandry-production",bookSignature:"Dimitrios Kontogiannatos, Anna Kourti and Kassio Ferreira Mendes",coverURL:"https://cdn.intechopen.com/books/images_new/9711.jpg",editors:[{id:"196691",title:"Dr.",name:"Dimitrios",middleName:null,surname:"Kontogiannatos",slug:"dimitrios-kontogiannatos",fullName:"Dimitrios Kontogiannatos"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10178",title:"Environmental Emissions",subtitle:null,isOpenForSubmission:!1,hash:"febf21ec717bfe20ae25a9dab9b5d438",slug:"environmental-emissions",bookSignature:"Richard Viskup",coverURL:"https://cdn.intechopen.com/books/images_new/10178.jpg",editors:[{id:"103742",title:"Dr.",name:"Richard",middleName:null,surname:"Viskup",slug:"richard-viskup",fullName:"Richard Viskup"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8511",title:"Cyberspace",subtitle:null,isOpenForSubmission:!1,hash:"8c1cdeb133dbe6cc1151367061c1bba6",slug:"cyberspace",bookSignature:"Evon Abu-Taieh, Abdelkrim El Mouatasim and Issam H. Al Hadid",coverURL:"https://cdn.intechopen.com/books/images_new/8511.jpg",editors:[{id:"223522",title:"Dr.",name:"Evon",middleName:"M.O.",surname:"Abu-Taieh",slug:"evon-abu-taieh",fullName:"Evon Abu-Taieh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"8468",title:"Sheep Farming",subtitle:"An Approach to Feed, Growth and Sanity",isOpenForSubmission:!1,hash:"838f08594850bc04aa14ec873ed1b96f",slug:"sheep-farming-an-approach-to-feed-growth-and-sanity",bookSignature:"António Monteiro",coverURL:"https://cdn.intechopen.com/books/images_new/8468.jpg",editedByType:"Edited by",editors:[{id:"190314",title:"Prof.",name:"António",middleName:"Cardoso",surname:"Monteiro",slug:"antonio-monteiro",fullName:"António Monteiro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9523",title:"Oral and Maxillofacial Surgery",subtitle:null,isOpenForSubmission:!1,hash:"5eb6ec2db961a6c8965d11180a58d5c1",slug:"oral-and-maxillofacial-surgery",bookSignature:"Gokul Sridharan",coverURL:"https://cdn.intechopen.com/books/images_new/9523.jpg",editedByType:"Edited by",editors:[{id:"82453",title:"Dr.",name:"Gokul",middleName:null,surname:"Sridharan",slug:"gokul-sridharan",fullName:"Gokul Sridharan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9785",title:"Endometriosis",subtitle:null,isOpenForSubmission:!1,hash:"f457ca61f29cf7e8bc191732c50bb0ce",slug:"endometriosis",bookSignature:"Courtney Marsh",coverURL:"https://cdn.intechopen.com/books/images_new/9785.jpg",editedByType:"Edited by",editors:[{id:"255491",title:"Dr.",name:"Courtney",middleName:null,surname:"Marsh",slug:"courtney-marsh",fullName:"Courtney Marsh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9018",title:"Some RNA Viruses",subtitle:null,isOpenForSubmission:!1,hash:"a5cae846dbe3692495fc4add2f60fd84",slug:"some-rna-viruses",bookSignature:"Yogendra Shah and Eltayb Abuelzein",coverURL:"https://cdn.intechopen.com/books/images_new/9018.jpg",editedByType:"Edited by",editors:[{id:"278914",title:"Ph.D.",name:"Yogendra",middleName:null,surname:"Shah",slug:"yogendra-shah",fullName:"Yogendra Shah"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8816",title:"Financial Crises",subtitle:"A Selection of Readings",isOpenForSubmission:!1,hash:"6f2f49fb903656e4e54280c79fabd10c",slug:"financial-crises-a-selection-of-readings",bookSignature:"Stelios Markoulis",coverURL:"https://cdn.intechopen.com/books/images_new/8816.jpg",editedByType:"Edited by",editors:[{id:"237863",title:"Dr.",name:"Stelios",middleName:null,surname:"Markoulis",slug:"stelios-markoulis",fullName:"Stelios Markoulis"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9585",title:"Advances in Complex Valvular Disease",subtitle:null,isOpenForSubmission:!1,hash:"ef64f11e211621ecfe69c46e60e7ca3d",slug:"advances-in-complex-valvular-disease",bookSignature:"Michael S. Firstenberg and Imran Khan",coverURL:"https://cdn.intechopen.com/books/images_new/9585.jpg",editedByType:"Edited by",editors:[{id:"64343",title:null,name:"Michael S.",middleName:"S",surname:"Firstenberg",slug:"michael-s.-firstenberg",fullName:"Michael S. Firstenberg"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10150",title:"Smart Manufacturing",subtitle:"When Artificial Intelligence Meets the Internet of Things",isOpenForSubmission:!1,hash:"87004a19de13702d042f8ff96d454698",slug:"smart-manufacturing-when-artificial-intelligence-meets-the-internet-of-things",bookSignature:"Tan Yen Kheng",coverURL:"https://cdn.intechopen.com/books/images_new/10150.jpg",editedByType:"Edited by",editors:[{id:"78857",title:"Dr.",name:"Tan Yen",middleName:null,surname:"Kheng",slug:"tan-yen-kheng",fullName:"Tan Yen Kheng"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9386",title:"Direct Numerical Simulations",subtitle:"An Introduction and Applications",isOpenForSubmission:!1,hash:"158a3a0fdba295d21ff23326f5a072d5",slug:"direct-numerical-simulations-an-introduction-and-applications",bookSignature:"Srinivasa Rao",coverURL:"https://cdn.intechopen.com/books/images_new/9386.jpg",editedByType:"Edited by",editors:[{id:"6897",title:"Dr.",name:"Srinivasa",middleName:"P",surname:"Rao",slug:"srinivasa-rao",fullName:"Srinivasa Rao"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editedByType:"Edited by",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9208",title:"Welding",subtitle:"Modern Topics",isOpenForSubmission:!1,hash:"7d6be076ccf3a3f8bd2ca52d86d4506b",slug:"welding-modern-topics",bookSignature:"Sadek Crisóstomo Absi Alfaro, Wojciech Borek and Błażej Tomiczek",coverURL:"https://cdn.intechopen.com/books/images_new/9208.jpg",editedByType:"Edited by",editors:[{id:"65292",title:"Prof.",name:"Sadek Crisostomo Absi",middleName:"C. Absi",surname:"Alfaro",slug:"sadek-crisostomo-absi-alfaro",fullName:"Sadek Crisostomo Absi Alfaro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"3",title:"Health Sciences",slug:"health-sciences",parent:null,numberOfBooks:1609,numberOfAuthorsAndEditors:41690,numberOfWosCitations:18267,numberOfCrossrefCitations:12230,numberOfDimensionsCitations:31175,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicSlug:"health-sciences",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editedByType:"Edited by",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9785",title:"Endometriosis",subtitle:null,isOpenForSubmission:!1,hash:"f457ca61f29cf7e8bc191732c50bb0ce",slug:"endometriosis",bookSignature:"Courtney Marsh",coverURL:"https://cdn.intechopen.com/books/images_new/9785.jpg",editedByType:"Edited by",editors:[{id:"255491",title:"Dr.",name:"Courtney",middleName:null,surname:"Marsh",slug:"courtney-marsh",fullName:"Courtney Marsh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8468",title:"Sheep Farming",subtitle:"An Approach to Feed, Growth and Sanity",isOpenForSubmission:!1,hash:"838f08594850bc04aa14ec873ed1b96f",slug:"sheep-farming-an-approach-to-feed-growth-and-sanity",bookSignature:"António Monteiro",coverURL:"https://cdn.intechopen.com/books/images_new/8468.jpg",editedByType:"Edited by",editors:[{id:"190314",title:"Prof.",name:"António",middleName:"Cardoso",surname:"Monteiro",slug:"antonio-monteiro",fullName:"António Monteiro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9018",title:"Some RNA Viruses",subtitle:null,isOpenForSubmission:!1,hash:"a5cae846dbe3692495fc4add2f60fd84",slug:"some-rna-viruses",bookSignature:"Yogendra Shah and Eltayb Abuelzein",coverURL:"https://cdn.intechopen.com/books/images_new/9018.jpg",editedByType:"Edited by",editors:[{id:"278914",title:"Ph.D.",name:"Yogendra",middleName:null,surname:"Shah",slug:"yogendra-shah",fullName:"Yogendra Shah"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9523",title:"Oral and Maxillofacial Surgery",subtitle:null,isOpenForSubmission:!1,hash:"5eb6ec2db961a6c8965d11180a58d5c1",slug:"oral-and-maxillofacial-surgery",bookSignature:"Gokul Sridharan",coverURL:"https://cdn.intechopen.com/books/images_new/9523.jpg",editedByType:"Edited by",editors:[{id:"82453",title:"Dr.",name:"Gokul",middleName:null,surname:"Sridharan",slug:"gokul-sridharan",fullName:"Gokul Sridharan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9585",title:"Advances in Complex Valvular Disease",subtitle:null,isOpenForSubmission:!1,hash:"ef64f11e211621ecfe69c46e60e7ca3d",slug:"advances-in-complex-valvular-disease",bookSignature:"Michael S. Firstenberg and Imran Khan",coverURL:"https://cdn.intechopen.com/books/images_new/9585.jpg",editedByType:"Edited by",editors:[{id:"64343",title:null,name:"Michael S.",middleName:"S",surname:"Firstenberg",slug:"michael-s.-firstenberg",fullName:"Michael S. Firstenberg"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7703",title:"Ocular Surface Diseases",subtitle:"Some Current Date on Tear Film Problem and Keratoconic Diagnosis",isOpenForSubmission:!1,hash:"3dcf967eb2f185930ce7fb7ae462d4e0",slug:"ocular-surface-diseases-some-current-date-on-tear-film-problem-and-keratoconic-diagnosis",bookSignature:"Dorota Kopacz",coverURL:"https://cdn.intechopen.com/books/images_new/7703.jpg",editedByType:"Edited by",editors:[{id:"271261",title:"Dr.",name:"Dorota",middleName:null,surname:"Kopacz",slug:"dorota-kopacz",fullName:"Dorota Kopacz"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9376",title:"Contemporary Developments and Perspectives in International Health Security",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"b9a00b84cd04aae458fb1d6c65795601",slug:"contemporary-developments-and-perspectives-in-international-health-security-volume-1",bookSignature:"Stanislaw P. Stawicki, Michael S. Firstenberg, Sagar C. Galwankar, Ricardo Izurieta and Thomas Papadimos",coverURL:"https://cdn.intechopen.com/books/images_new/9376.jpg",editedByType:"Edited by",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9477",title:"Muscular Dystrophy",subtitle:"Research Updates and Therapeutic Strategies",isOpenForSubmission:!1,hash:"dd601de843019d51e1769a26cf7e1acc",slug:"muscular-dystrophy-research-updates-and-therapeutic-strategies",bookSignature:"Gisela Gaina",coverURL:"https://cdn.intechopen.com/books/images_new/9477.jpg",editedByType:"Edited by",editors:[{id:"242747",title:"Dr.",name:"Gisela",middleName:null,surname:"Gaina",slug:"gisela-gaina",fullName:"Gisela Gaina"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9158",title:"Sports Science and Human Health",subtitle:"Different Approaches",isOpenForSubmission:!1,hash:"2e9d3cc22773ce656e50633f8f1721f4",slug:"sports-science-and-human-health-different-approaches",bookSignature:"Daniel Almeida Marinho, Henrique P. Neiva, Christopher P. Johnson and Nawaz Mohamudally",coverURL:"https://cdn.intechopen.com/books/images_new/9158.jpg",editedByType:"Edited by",editors:[{id:"177359",title:"Dr.",name:"Daniel Almeida",middleName:"Almeida",surname:"Marinho",slug:"daniel-almeida-marinho",fullName:"Daniel Almeida Marinho"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10136",title:"Intestinal Obstructions",subtitle:null,isOpenForSubmission:!1,hash:"e23eb01e6d12a4a25a4c16dc9bb23e89",slug:"intestinal-obstructions",bookSignature:"Dmitry Victorovich Garbuzenko",coverURL:"https://cdn.intechopen.com/books/images_new/10136.jpg",editedByType:"Edited by",editors:[{id:"108808",title:"Prof.",name:"Dmitry",middleName:"Victorovich",surname:"Garbuzenko",slug:"dmitry-garbuzenko",fullName:"Dmitry Garbuzenko"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9047",title:"Nursing",subtitle:"New Perspectives",isOpenForSubmission:!1,hash:"1500bf539d1400c51b941e95f3a1f0f9",slug:"nursing-new-perspectives",bookSignature:"Serpil Çelik Durmuş",coverURL:"https://cdn.intechopen.com/books/images_new/9047.jpg",editedByType:"Edited by",editors:[{id:"189558",title:"Ph.D.",name:"Serpil",middleName:null,surname:"Çelik Durmuş",slug:"serpil-celik-durmus",fullName:"Serpil Çelik Durmuş"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:1609,mostCitedChapters:[{id:"19013",doi:"10.5772/21983",title:"Cell Responses to Surface and Architecture of Tissue Engineering Scaffolds",slug:"cell-responses-to-surface-and-architecture-of-tissue-engineering-scaffolds",totalDownloads:9594,totalCrossrefCites:106,totalDimensionsCites:220,book:{slug:"regenerative-medicine-and-tissue-engineering-cells-and-biomaterials",title:"Regenerative Medicine and Tissue Engineering",fullTitle:"Regenerative Medicine and Tissue Engineering - Cells and Biomaterials"},signatures:"Hsin-I Chang and Yiwei Wang",authors:[{id:"45747",title:"Dr.",name:"Hsin-I",middleName:null,surname:"Chang",slug:"hsin-i-chang",fullName:"Hsin-I Chang"},{id:"53659",title:"Ms.",name:"Yiwei",middleName:null,surname:"Wang",slug:"yiwei-wang",fullName:"Yiwei Wang"}]},{id:"46479",doi:"10.5772/57353",title:"Floating Drug Delivery Systems for Eradication of Helicobacter pylori in Treatment of Peptic Ulcer Disease",slug:"floating-drug-delivery-systems-for-eradication-of-helicobacter-pylori-in-treatment-of-peptic-ulcer-d",totalDownloads:1921,totalCrossrefCites:65,totalDimensionsCites:145,book:{slug:"trends-in-helicobacter-pylori-infection",title:"Trends in Helicobacter pylori Infection",fullTitle:"Trends in Helicobacter pylori Infection"},signatures:"Yousef Javadzadeh and Sanaz Hamedeyazdan",authors:[{id:"94276",title:"Prof.",name:"Yousef",middleName:null,surname:"Javadzadeh",slug:"yousef-javadzadeh",fullName:"Yousef Javadzadeh"},{id:"98229",title:"Dr.",name:"Sanaz",middleName:null,surname:"Hamedeyazdan",slug:"sanaz-hamedeyazdan",fullName:"Sanaz Hamedeyazdan"}]},{id:"43874",doi:"10.5772/55925",title:"Residual Transmission of Malaria: An Old Issue for New Approaches",slug:"residual-transmission-of-malaria-an-old-issue-for-new-approaches",totalDownloads:4195,totalCrossrefCites:59,totalDimensionsCites:141,book:{slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",title:"Anopheles mosquitoes",fullTitle:"Anopheles mosquitoes - New insights into malaria vectors"},signatures:"Lies Durnez and Marc Coosemans",authors:[{id:"152754",title:"Prof.",name:"Marc",middleName:null,surname:"Coosemans",slug:"marc-coosemans",fullName:"Marc Coosemans"},{id:"169018",title:"Dr.",name:"Lies",middleName:null,surname:"Durnez",slug:"lies-durnez",fullName:"Lies Durnez"}]}],mostDownloadedChaptersLast30Days:[{id:"43758",title:"Anxiety Disorders in Pregnancy and the Postpartum Period",slug:"anxiety-disorders-in-pregnancy-and-the-postpartum-period",totalDownloads:22832,totalCrossrefCites:11,totalDimensionsCites:20,book:{slug:"new-insights-into-anxiety-disorders",title:"New Insights into Anxiety Disorders",fullTitle:"New Insights into Anxiety Disorders"},signatures:"Roberta Anniverno, Alessandra Bramante, Claudio Mencacci and Federico Durbano",authors:[{id:"157077",title:"Dr.",name:"Federico",middleName:null,surname:"Durbano",slug:"federico-durbano",fullName:"Federico Durbano"},{id:"166382",title:"Dr.",name:"Roberta",middleName:null,surname:"Anniverno",slug:"roberta-anniverno",fullName:"Roberta Anniverno"}]},{id:"58891",title:"Cognitive-Behavioral Psychotherapy for Couples: An Insight into the Treatment of Couple Hardships and Struggles",slug:"cognitive-behavioral-psychotherapy-for-couples-an-insight-into-the-treatment-of-couple-hardships-and",totalDownloads:6324,totalCrossrefCites:2,totalDimensionsCites:3,book:{slug:"cognitive-behavioral-therapy-and-clinical-applications",title:"Cognitive Behavioral Therapy and Clinical Applications",fullTitle:"Cognitive Behavioral Therapy and Clinical Applications"},signatures:"Caroline Dugal, Gaëlle Bakhos, Claude Bélanger and Natacha\nGodbout",authors:[{id:"57536",title:"Prof.",name:"Claude",middleName:null,surname:"Belanger",slug:"claude-belanger",fullName:"Claude Belanger"}]},{id:"70405",title:"Hemostasis in Cardiac Surgery: How We Do it with Limited Resources",slug:"hemostasis-in-cardiac-surgery-how-we-do-it-with-limited-resources",totalDownloads:1303,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:null,title:"Biosurgicals - The Next Frontier in Operative Approaches",fullTitle:"Biosurgicals - The Next Frontier in Operative Approaches"},signatures:"Fevzi Sarper Türker",authors:null},{id:"57717",title:"In Vitro Cytotoxicity and Cell Viability Assays: Principles, Advantages, and Disadvantages",slug:"in-vitro-cytotoxicity-and-cell-viability-assays-principles-advantages-and-disadvantages",totalDownloads:12084,totalCrossrefCites:26,totalDimensionsCites:54,book:{slug:"genotoxicity-a-predictable-risk-to-our-actual-world",title:"Genotoxicity",fullTitle:"Genotoxicity - A Predictable Risk to Our Actual World"},signatures:"Özlem Sultan Aslantürk",authors:[{id:"211212",title:"Dr.",name:"Özlem Sultan",middleName:null,surname:"Aslantürk",slug:"ozlem-sultan-aslanturk",fullName:"Özlem Sultan Aslantürk"}]},{id:"56223",title:"Volunteering in Palliative Care in France: “A Tough Job”; Patient, Family, Caregiver, and Volunteer Perspectives",slug:"volunteering-in-palliative-care-in-france-a-tough-job-patient-family-caregiver-and-volunteer-perspec",totalDownloads:2258,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"highlights-on-several-underestimated-topics-in-palliative-care",title:"Highlights on Several Underestimated Topics in Palliative Care",fullTitle:"Highlights on Several Underestimated Topics in Palliative Care"},signatures:"Yaël Tibi-Lévy and Martine Bungener",authors:[{id:"88839",title:"Dr.",name:"Martine",middleName:null,surname:"Bungener",slug:"martine-bungener",fullName:"Martine Bungener"},{id:"205065",title:"Ph.D.",name:"Yaël",middleName:null,surname:"Tibi-Levy",slug:"yael-tibi-levy",fullName:"Yaël Tibi-Levy"}]},{id:"64762",title:"Mechanism and Health Effects of Heavy Metal Toxicity in Humans",slug:"mechanism-and-health-effects-of-heavy-metal-toxicity-in-humans",totalDownloads:5782,totalCrossrefCites:19,totalDimensionsCites:44,book:{slug:"poisoning-in-the-modern-world-new-tricks-for-an-old-dog-",title:"Poisoning in the Modern World",fullTitle:"Poisoning in the Modern World - New Tricks for an Old Dog?"},signatures:"Godwill Azeh Engwa, Paschaline Udoka Ferdinand, Friday Nweke Nwalo and Marian N. Unachukwu",authors:[{id:"241837",title:"Mr.",name:"Godwill Azeh",middleName:null,surname:"Engwa",slug:"godwill-azeh-engwa",fullName:"Godwill Azeh Engwa"},{id:"274194",title:"BSc.",name:"Paschaline Ferdinand",middleName:null,surname:"Okeke",slug:"paschaline-ferdinand-okeke",fullName:"Paschaline Ferdinand Okeke"},{id:"286975",title:"Dr.",name:"Friday",middleName:null,surname:"Nweke Nwalo",slug:"friday-nweke-nwalo",fullName:"Friday Nweke Nwalo"},{id:"286976",title:"Dr.",name:"Marian",middleName:null,surname:"Unachukwu",slug:"marian-unachukwu",fullName:"Marian Unachukwu"}]},{id:"64851",title:"Herbal Medicines in African Traditional Medicine",slug:"herbal-medicines-in-african-traditional-medicine",totalDownloads:9381,totalCrossrefCites:10,totalDimensionsCites:15,book:{slug:"herbal-medicine",title:"Herbal Medicine",fullTitle:"Herbal Medicine"},signatures:"Ezekwesili-Ofili Josephine Ozioma and Okaka Antoinette Nwamaka\nChinwe",authors:[{id:"191264",title:"Prof.",name:"Josephine",middleName:"Ozioma",surname:"Ezekwesili-Ofili",slug:"josephine-ezekwesili-ofili",fullName:"Josephine Ezekwesili-Ofili"},{id:"211585",title:"Prof.",name:"Antoinette",middleName:null,surname:"Okaka",slug:"antoinette-okaka",fullName:"Antoinette Okaka"}]},{id:"61866",title:"Plants Secondary Metabolites: The Key Drivers of the Pharmacological Actions of Medicinal Plants",slug:"plants-secondary-metabolites-the-key-drivers-of-the-pharmacological-actions-of-medicinal-plants",totalDownloads:5125,totalCrossrefCites:9,totalDimensionsCites:25,book:{slug:"herbal-medicine",title:"Herbal Medicine",fullTitle:"Herbal Medicine"},signatures:"Rehab A. Hussein and Amira A. El-Anssary",authors:[{id:"212117",title:"Dr.",name:"Rehab",middleName:null,surname:"Hussein",slug:"rehab-hussein",fullName:"Rehab Hussein"},{id:"221140",title:"Dr.",name:"Amira",middleName:null,surname:"El-Anssary",slug:"amira-el-anssary",fullName:"Amira El-Anssary"}]},{id:"17956",title:"Sexual and Reproductive Function in Chronic Kidney Disease and Effect of Kidney Transplantation",slug:"sexual-and-reproductive-function-in-chronic-kidney-disease-and-effect-of-kidney-transplantation",totalDownloads:11370,totalCrossrefCites:1,totalDimensionsCites:1,book:{slug:"after-the-kidney-transplant-the-patients-and-their-allograft",title:"After the Kidney Transplant",fullTitle:"After the Kidney Transplant - The Patients and Their Allograft"},signatures:"Mahboob Lessan-Pezeshki and Shirin Ghazizadeh",authors:[{id:"26564",title:"Prof.",name:"Mahboob",middleName:null,surname:"Lessan Pezeshki",slug:"mahboob-lessan-pezeshki",fullName:"Mahboob Lessan Pezeshki"},{id:"26571",title:"Prof.",name:"Shirin",middleName:null,surname:"Ghazizadeh",slug:"shirin-ghazizadeh",fullName:"Shirin Ghazizadeh"}]},{id:"61046",title:"Optical Diagnostics to Improve Periodontal Diagnosis and Treatment",slug:"optical-diagnostics-to-improve-periodontal-diagnosis-and-treatment",totalDownloads:3664,totalCrossrefCites:1,totalDimensionsCites:1,book:{slug:"periodontology-and-dental-implantology",title:"Periodontology and Dental Implantology",fullTitle:"Periodontology and Dental Implantology"},signatures:"Fardad Shakibaie and Laurence Walsh",authors:[{id:"179467",title:"Prof.",name:"Laurence",middleName:null,surname:"Walsh",slug:"laurence-walsh",fullName:"Laurence Walsh"},{id:"235443",title:"Dr.",name:"Fardad",middleName:null,surname:"Shakibaie",slug:"fardad-shakibaie",fullName:"Fardad Shakibaie"}]}],onlineFirstChaptersFilter:{topicSlug:"health-sciences",limit:3,offset:0},onlineFirstChaptersCollection:[{id:"74822",title:"Current Trends in Stroke Rehabilitation",slug:"current-trends-in-stroke-rehabilitation",totalDownloads:0,totalDimensionsCites:null,doi:"10.5772/intechopen.95576",book:{title:"Ischemic Stroke"},signatures:"Pratap Sanchetee"},{id:"74616",title:"Orthoses Development Using Modern Technologies",slug:"orthoses-development-using-modern-technologies",totalDownloads:0,totalDimensionsCites:null,doi:"10.5772/intechopen.95463",book:{title:"Orthotics and Prosthetics"},signatures:"Branko Štefanovič, Mária Danko, Monika Michalíková, Lucia Bednarčíková, Viktória Rajťúková, Teodor Tóth, Marianna Trebuňová, Radovan Hudák and Jozef Živčák"},{id:"74825",title:"Land Use Change Affects Soil Organic Carbon: An Indicator of Soil Health",slug:"land-use-change-affects-soil-organic-carbon-an-indicator-of-soil-health",totalDownloads:0,totalDimensionsCites:null,doi:"10.5772/intechopen.95764",book:{title:"Environmental Health"},signatures:"Lucy W. Ngatia, Daniel Moriasi, Johnny M. Grace III, Riqiang Fu, Cassel S. Gardner and Robert W. Taylor"}],onlineFirstChaptersTotal:556},preDownload:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[{type:"book",id:"10176",title:"Microgrids and Local Energy Systems",subtitle:null,isOpenForSubmission:!0,hash:"c32b4a5351a88f263074b0d0ca813a9c",slug:null,bookSignature:"Prof. Nick Jenkins",coverURL:"https://cdn.intechopen.com/books/images_new/10176.jpg",editedByType:null,editors:[{id:"55219",title:"Prof.",name:"Nick",middleName:null,surname:"Jenkins",slug:"nick-jenkins",fullName:"Nick Jenkins"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:8,limit:8,total:1},route:{name:"profile.detail",path:"/profiles/184884/melanie-vachon",hash:"",query:{},params:{id:"184884",slug:"melanie-vachon"},fullPath:"/profiles/184884/melanie-vachon",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()