Open access peer-reviewed chapter - ONLINE FIRST

Optical Chirality and Single-Photon Isolation

By Lei Tang and Keyu Xia

Submitted: July 14th 2019Reviewed: November 3rd 2019Published: December 3rd 2019

DOI: 10.5772/intechopen.90354

Downloaded: 14

Abstract

Optical isolation is important for protecting a laser from damage due to the detrimental back reflection of light. It typically relies on breaking Lorentz reciprocity and normally is achieved via the Faraday magneto-optical effect, requiring a strong external magnetic field. Single-photon isolation, the quantum counterpart of optical isolation, is the key functional component in quantum information processing, but its realization is challenging. In this chapter, we present all-optical schemes for isolating the backscattering from single photons. In the first scheme, we show the single-photon isolation can be realized by using a chiral quantum optical system, in which a quantum emitter asymmetrically couples to nanowaveguide modes or whispering-gallery modes with high optical chirality. Secondly, we propose a chiral optical Kerr nonlinearity to bypass the so-called dynamical reciprocity in nonlinear optics and then achieve room-temperature photon isolation with low insertion loss. The concepts we present may pave the way for quantum information processing in an unconventional way.

Keywords

  • single-photon isolation
  • optical chirality
  • chiral light-matter interaction
  • optical isolator
  • optical circulator
  • chiral Kerr nonlinearity

1. Introduction

Controlling the flow of light is extremely essential for quantum information processing in integrated optical circuits. Nonreciprocal propagation of light at the single-photon level is in great demand for applications in quantum networks [1, 2], quantum computing [3], quantum entanglement [4], and quantum measurement [5]. For this purpose, nonreciprocal photonic elements, such as optical isolators and circulators, processing and routing of photonic signals at ultralow light level, or single-photon level in integrated optical circuits has been attracting a lot of interest.

The conventional implementations of nonreciprocal optical devices are achieved by using the Faraday magneto-optical effect. However, such Faraday-effect-based devices suffer large optical losses and conflict with miniaturization and integration. To date, integrated nonreciprocal photonic elements have been demonstrated via magneto-optical effect [6, 7], optical nonlinearity [8, 9, 10], and opto-mechanical system [11, 12, 13]. Very recently, Dong et al. proposed and experimentally realized a scheme to achieve a true single-photon non-reciprocity in a cold atomic ensemble [14]. However, most of these devices cannot achieve high isolations, low losses, and compatibility with single-photon level at the same time.

Nanophotonic devices control and confine the flow of light at a subwavelength scale. The strong confinement in these structures yields optical chirality, which is an inherent link between local polarization and the propagating direction of light [15]. If quantum emitters are embedded in these structures, chiral light-matter interaction is obtained, leading to propagation-direction-dependent emission, absorption, and scattering of photons. As a result, chiral light-matter interaction can be used to break time symmetry and achieve on-chip single-photon isolation. Some feasible schemes based on chiral quantum optics have been proposed to realize non-reciprocity at the single-photon level [16, 17], and optical isolators and circulators have been experimentally demonstrated in full quantum regime [18, 19].

Besides strong confinement of light, atoms can induce optical chirality. Here, optical chirality is chiral cross-Kerr (XKerr) nonlinearity induced in atoms. As a result of the chirality of atomic nonlinearity, the phases and transmission amplitudes of the forward- and backward-moving probe fields are sufficiently different after passing through atoms in two opposite directions. Thus, chiral XKerr nonlinear can achieve chip-compatible optical isolation with high isolation and low insert losses [20]. And very recently, XKerr-based optical isolators and circulators for high isolation, low loss, and an ultralow probe field at room temperature have been experimentally demonstrated [21].

2. Optical chirality and chiral light-matter interaction

The strong light confinement in subwavelength structures, e.g., nanofibers, nanowaveguides, or whispering-gallery mode (WGM) microresonators, can lock the local polarization of the light to its propagation direction. In these structures, the light is strongly confined transversely, leading to a longitudinal component of the electric field (e-field), which is parallel with the propagation direction. The longitudinal and transverse components, denoted as Eand E, respectively, are comparable, and the former oscillates ±π/2radians out of phase with respect to the latter, with the ±sign depending on the propagation direction of the light (forward or backward) [15]:

Elocal=E±iE.E1

As a consequence, the local polarization of the light is elliptical, yielding a transverse spin angular momentum component, whose e-field rotates around an axis perpendicular to the propagation direction. The transverse spin components flip sign when the propagation of light reverses. This correlation of the polarization and the propagation direction is named the spin-momentum locking (SML) [15]. For the ideal case, E=E, the e-field is circularly polarized.

In order to characterize what degree the e-field is locked to the momentum or what percentage of circular polarization of the local light in the nanostructures, the circular polarization unit vectors are defined as

σ̂±=x̂±iŷ2,E2

where σ̂is for the right circularly polarized unit vector and σ̂for the left circularly polarized one and x̂and ŷare unit vectors along the x and y directions. Thus, the optical chirality (OC) of an e-field is defined as [17, 22]:

C=Erσ̂2Erσ̂+2Er2.E3

Obviously, the OC is limited to a region from 1to 1. Note that the value C=11implies the e-field is entirely σ-(σ+-) polarized, while C=0corresponds to a linear polarization. The intensity difference between the right circularly (σ+) and the left circularly (σ) polarized components at the position ris calculated by D=Erσ̂2Erσ̂+2.

Then we focus on the interaction between the light possessing photonic SML and chiral quantum emitters with polarization-dependent dipole transitions. If a pair of counter-propagating spin-momentum-locked light interacts with quantum emitters, the interaction becomes chiral. In other words, the interaction strength for forward- and backward-propagating light modes is different. In this case, photon emission, absorption, and scattering become unidirectional. As a result, optical nonreciprocal flow of light can be achieved when a quantum emitter with degenerate transitions is populated in a specific spin state or one can shift the transition energy to make it couple (decouple) with one of the two of counter-propagating modes. On the basis of these effects, optical isolation can be realized at the single-photon level, which enables nonreciprocal single-photon devices, e.g., single-photon isolator and circulator. Next, we introduce the realization of single-photon isolators and circulators based on chiral light-matter interaction.

3. Single-photon isolation using chiral light-matter interaction

A single-photon isolator and circulator can be achieved by chirally coupling a quantum emitter to a passive, linear nanophotonic waveguide or a WGM microresonator which possesses optical chirality.

3.1 Single-photon isolator based on a nanophotonic waveguide

The type-I single-photon isolator is based on a line defect photonic crystal waveguide [16]. By carefully engineering the photonic crystal waveguide, it can have an in-plane circular polarization, and counter-propagating modes are counter circulating [22]. A quantum emitter is doped at the position where the waveguide possesses only the right-propagating σ+-polarized light or left-propagating σ-polarized light, as shown in Figure 1a. The doped emitter strongly interacts with the σ+-polarized light but weakly couples to the σ-polarized light. As a result, the time-reverse symmetry of the waveguide-emitter system breaks. The emitter scatters the forward- (right-) propagating single photons into an open environment whereas behaves transparently for the backward- (left-) propagating photons.

Figure 1.

Schematics of the single-photon isolators. (a) Single-photon isolator based on a photonic crystal waveguide asymmetrically coupling with a quantum emitter. The waveguide possesses local circular polarization, and its rotating direction is dependent on the propagating direction [16]. The quantum emitter is doped in these specific sites. (b) Single-photon isolator based on a photonic nanofiber asymmetrically coupling with quantum emitters. The nanofiber is realized as the waist of a tapered silica fiber, whose evanescent fields exhibit propagation-direction-dependent circular polarization [18]. Quantum emitters are located in the vicinity of the nanofiber. (c) Energy-level diagram for a quantum emitter with unbalanced decay rates γ + ≫ γ − and different coupling strengths with σ ± -polarized light g + ≫ g − . The states ∣ e ± 1 ⟩ and ∣ g ⟩ correspond to excited states and a ground state, respectively, and the transition ∣ g ⟩ ↔ ∣ e + 1 ⟩ is driven by σ + -polarized light, while ∣ g ⟩ ↔ ∣ e − 1 ⟩ transition is driven by σ − -polarized light. Here, quantum emitters can be Cs atoms [23], Rb atoms [24], or quantum dots [25].

The steady-state transmission for the two atomic transitions coupling with waveguide is calculated by using the photon transport method [16, 26, 27]

t±ω=ωωqiγ±Γ±ωωq+iγ±Γ±,E4

where ωis the frequency of the input photon and ωqis the frequency of the atomic transition. The detuning is defined as Δ=ωqω. In Γ±=V±2/2vg, V±is the coupling strength between the atom and the field in the waveguide, which is proportional to the atomic dipole moments μ±, and vgis the group velocity of the photon in the waveguide. A Cs atom is used as the quantum emitter so that μ+=45μ, and γ±, Γ±μ±2. As a consequence, γ+/γ=Γ+/Γ1. The transmission is defined as T±=t±2. The isolation contrast is evaluated as ϒ=T+T/T++T[26].

Due to the coupling of the atom to the waveguide and open environment, the ratio of atomic dissipation rate is set to α=Γ+/γ+=Γ/γ. If α1, the single-photon isolation is achieved, as shown in Figure 2a. Obviously, Tis almost equal to unity for a right-hand input, while T+is small if 10Δ/γ30. Note that the transmissions are the same, 0at Δ=0for both of the right-handed and left-handed inputs. At vanishing detuning, irrespective of the propagating direction, photons cannot be transmitted through the waveguide. However, the linewidths of the dips for the left-handed input (blue solid line) are much broader than those for the right-handed input (red dashed line). Because of this directionality-dependent linewidth, a single-photon wave packet with a duration Γ+1τΓ1when incident from the right is mostly transmitted through the waveguide, while when it is incident from the left, it is mostly scattered away to the open environment. Note that the performance of the single-photon isolation is dependent on the ratio α. As seen from Figure 2b, a good nonreciprocal behavior occurs only around the critical coupling α1, and if 5αΔ/γ10αand 0.53<α<1.8, the isolation contrast ϒcan be larger than 0.8.

Figure 2.

(a) Steady-state transmission as a function of Δ for α = 1 . Solid blue curve is for transmission T + , and dashed red curve is for transmission T − . (b) Isolation contrast as a function of α . Solid blue curve indicates ϒ for ∣ Δ ∣ / γ − = 10 α and dashed red curve for ∣ Δ ∣ / γ − = 5 α . The two curves are mostly overlapped. Figures are reproduced with permission from [16].

Low-loss silica nanophotonic waveguides with a strongly nonreciprocal transmission controlled by the internal state of spin-polarized atoms have been demonstrated [18]. In the experiment, an ensemble of individual cesium atoms is located in the vicinity of a subwavelength-diameter silica nanofiber (250-nm radius) trapped in a nanofiber-based two-color optical dipole trap [28]. As shown in Figure 1b, a quasilinearly polarized light incident to the nanofiber exhibits chiral character at the position of the atoms: when the evanescent field propagates in the forward direction, it is almost fully σ+-polarized, while it is almost fully σ-polarized if it propagates in the backward direction [18]. The experimental results show that the probe light with a power of 0.8 pW, corresponding to about 0.1 photon per excited-state lifetime, incident into nanofiber from different port obtains nonreciprocal transmissions, T+=0.13±0.01and T=0.78±0.02, yielding an isolation F=10logT/T+=7.8dB[18]. Furthermore, trapping more atoms in the vicinity of the nanofiber can increase the isolation [18].

3.2 Single-photon isolator and circulator based on a WGM microresonator

The type-II single-photon isolator is based on a WGM microresonator. In this setup, when the linear polarized light enters the bus-waveguide from port P1, it excites a σ+-polarized counterclockwise (CCW) mode, while when it is incident from port P2, it drives σ-polarized clockwise (CW) mode [16]. As a result, the two counter-propagating modes in the WGM microresonator couple to a quantum emitter with different dipole moments μ+and μcorresponding to coupling strength g+and g.

The transmission into the bus and drop waveguides are calculated by [16].

t±,Bω=1+2iκex1ωcωg±2ωqωiγ±,E5
t±,Dω=2iκex1κex2ωcωg±2ωqωiγ±.E6

where κex12=V122/2vgis the decay rate of the resonator due to the external coupling V12to the bus (drop) waveguide, and the photons in both of the bus and drop waveguides have the same group velocity vgassumed. The total decay rate of the resonator is κ=κi+κex1+κex2where κiis the intrinsic decay rate of the resonator. The detuning is defined as Δ=ωcω, and ωc=ωqis assumed where ωcis the resonating frequency of the resonator and ωqis the transition frequency of the quantum emitter.

In the configuration of this device, if the drop waveguide is removed, i.e., κex2=0, single-photon isolator is achieved (see Figure 3). In this case, T±,Bis substituted with T±. As shown in Figure 4, if g=0and g+κi, at Δ=0, T+=1, while T0. This can be achieved by using a negatively charged quantum dot as the quantum emitter [25]. If g>0and Δ0, the nonreciprocal window disappears. However, when Δg, γ+=0, and g+/κi1, the right-moving photon can pass through the device, corresponding to T+=1(solid blue curve), while the left-moving photon decays into the environment via the resonator, corresponding to T=0(solid red curve). At Δg+, the optical nonreciprocity is reversed. The device is transparent for left-moving photon but blocks the right-moving photon. If γ+κi, the part of the excitation of the right-moving photon can pass through the device (dotted green curve).

Figure 3.

Schematic of the single-photon isolator or circulator. There is a quantum emitter doped in a WGM microresonator, which possesses a σ + -polarized CCW mode and a σ − -polarized CW mode. The microresonator couples to a lower bus waveguide with a rate κ ex 1 and a upper drop waveguide with a rate κ ex 2 . Reproduced with permission from [16].

Figure 4.

Steady-state transmissions of the single-photon isolator using a WGM microresonator in the absence of the drop waveguide, i.e., κ ex 2 = 0 , and under the critical coupling condition κ ex 1 = κ i . Dashed and solid curves are for the transmission T − when g − = 0 and g − = g + / 45 , while solid blue and dotted green curves are for the transmission T + when γ + = 0 and γ + = 3 κ i , respectively. g + = 10 κ i . Reproduced with permission from [16].

A WGM bottle microresonator coupling to the optical fiber and a single 85Rbatom to realize the type-II optical isolator has been demonstrated [18]. In the experiment, for the bottle microresonator, it sustains WGMs with ultrahigh quality factor and small mode volume [24]. As a result of strong transverse confined, its evanescent fields of WGMs are almost fully circularly polarized, with OC C>0.96[24]. The single 85Rbatom is prepared in the outermost mF=3Zeeman substrate of the F=3hyperfine ground state. As seen from Figure 1c, the states e+1and e1correspond to the excited states F=4,mF=+4and F=4,mF=+2, respectively. In the experiment, the transition ge+1is much stronger than the ge1transition, corresponding to the coupling strength, g+and g, between the atom and the two counterrotating WGMs, yielding g+/g=5.8[18]. The experimental results show that when the probe light with power of 3 pW, corresponding to about 0.2 photon per resonator lifetime, obtains nonreciprocal transmissions through the system of T+=0.72±0.02in the forward direction and T=0.03±0.01in the backward direction, yielding an isolation F=13dB.

The single-photon circulator consists of two waveguides and a WGM microresonator, and both of the bus and drop waveguides overcouple to the resonator, i.e., κex1=κex2=3κi(see Figure 3). As seen from Figure 5a, at Δ0, for port P1input αin, most excitation of the photon can transport to the bus-waveguide port P2, T+,B=0.85(solid blue curve), while the output to the drop-waveguide port P4is vanishingly small (dashed blue curve). As for port P2input βin, there is a dip (peak) in the transmission T,D(T,B), but the linewidth is very small, 0.16κi, as shown in Figure 5a. In contrast, the whole transmission spectrum has a linewidth of 11κi. As a result, a single-photon pulse bandwidth 0.16κiΔB11κican transport to the drop-waveguide port P3with a probability of 0.74. The probability of transmitting to the bus-waveguide port P1is small, 0.02, yielding a contrast 0.95. The numerical simulations of the propagation of a single-photon pulse are performed in [16], which match the analytic forms well (see gray curves in Figure 5a). If Δg, T+,B=0.835to the P2, T+,D=0.032to P4, and T,B=0.021to the P1, T,D=0.733to P3. As a consequence, the device forms a P1P2P3circulator. The single-photon incident from port P1transmits to port P2, but the photon entering port P2comes out from port P3.

Figure 5.

(a) Steady-state transmissions of the single-photon circulator using a WGM microresonator and both of the bus and drop waveguides overcouple to the resonator, i.e., κ ex 1 = κ ex 2 = 3 κ i . Solid blue (red) curve is for the transmission T + , B ( T − , B ) in the bus waveguide, while the dashed blue (red) curve is for the transmission T + , D ( T − , D ) in the drop waveguide. The gray curves are the results from numerical simulations, which mostly overlap with other curves. g + = 5 κ i , g − = g + / 45 , γ + = 0.3 κ i , and γ − = γ + / 45 . (b) Propagation of single-photon pulses with ∼ 4 κ i in the resonator for Δ = 0 and v g = 1 × 10 8 m / s . Blue (red) lines are for the input and transmitted excitations for the left-handed (right-handed) input. The arrows indicate the moving directions of photons. Reproduced with permission from [16].

If Δ0, the numerical simulations of the propagation of a single-photon pulse in time as it passed through the circulator are performed in [16]. Figure 5b shows Gaussian pulse wave packets, ϕx0±,B=τ2/π4exx02/2τ2, incident from port P1and P2at the same time td. The transmissions are calculated by T±,B/D=+ϕ±,B/Dxtdϕxtddxto be T+,BT,BT+,DT,D=0.9,0.178,0.02,0.675excitations output to port P2P1P4P3. Obviously, a three-port circulator at the single-photon level is achieved.

Note that if the states are initially populated to 62S1/2,F=4,m=4for Cs atoms or 52S1/2,F=3,m=3for Rb atoms, μ+μ, the optical nonreciprocity can be reversed, and the single-photon circulator forms a P2P1P4circulator.

A quantum optical circulator operated by a single atom has been demonstrated [19]. In the experiment, a single 85Rbatom is coupled to the WGM of a bottle microresonator, which is interfaced by two tapered fiber couplers, realizing a four-port device. The single 85Rbatom is prepared in the outermost Zeeman sublevel mF=+3of the 5S1/2, F=3hyperfine ground state. The light in the CCW mode excites state F=4,mF=+4more strongly than CW mode exciting F=4,mF=+2state, corresponding to coupling strength of resonator modes and the atom, g+g. The presence of the atom changes the resonator field decay rate from κtot=κi+κex1+κex2to κtot+Γ±, where Γ±=g±2/γis the direction-dependent atom-induced loss rate [19] and γ=2π×3MHzis the dipole decay rate of Rb. For the CW mode, Γis small, and the resonator field decay rate is not substantially modified by the atom, whereas for the CCW mode, Γ+can become comparable with or even exceed κtot. As a result, when light is incident into the device from ports P2and P4for which it couples to the CW mode (see Figure 3), the add-drop functionality is achieved. However, for the two other input ports P1and P3, the light couples to the CCW mode, and the incident light field remains in its initial fiber in the condition of the resonator-atom system operating in the undercoupled regime, κex1,κex2Γ+. Overall, the device realizes an optical circulator that routes light from the input port Pito the adjacent output port Pi+1with i1,2,3,4(see Figure 3).

In the experiment, the transmissions Tijto all output ports Pjwhen sending a weak coherent probe field into the four different input ports Pihave been measured [19]. And the performance of the circulator can be quantified with the fidelity Fand the average photon survival probability η. The fidelity is evaluated as the overlap of the renormalized transmission matrix T˜=Tij/ηiwith the one expected for the ideal circulator, Tid. Here, ηi=kTi,kis the survival probability of a photon entering port Pi. Thus, the average operation fidelity of the circulator is [19]

F=TrT˜Tid,TTrTidTid,T,E7

giving the probability of the correct circulator operation average over various inputs. The minimum fidelity is F=0, whereas F=1is reached for ideal operation. The experimental results show an optimum circulator performance for κtot/2κi=2.2, where F=0.72±0.03and, at the same time, η=0.73±0.04.

Furthermore, the circulator performance can also be quantified by the isolations [19].

Ii=10logTi,i+1/Ti+1,i.E8

For the optimum working point, it achieves Ii=10.9±2.5,6.8±1.3,4.7±0.7,5.4±1.1dBand an average insertion loss of 10logη=1.4dB[19].

Note that when the atom is prepared in the opposite Zeeman ground state, F=3,mF=3, the operation direction of the circulator is reversed.

The type-III single-photon isolator is based on a microring resonator coupling to a QD and a nearby waveguide [17]. In the approach, the silicon microring resonator in which light is tightly transversely confined has an exceptionally strong evanescent e-field and a near-unity OC surrounding the whole outside and inside walls of the resonator. By initializing a quantum dot (QD) in a specific spin ground state or using the optical Stark control, a broadband single-photon isolation over several gigahertz is achieved.

The QD-resonator system consists of a silicon waveguide, a silicon microring resonator, and a single negatively charged quantum dot (QD). Numerical simulations using the finite-difference time-domain (FDTD) method are performed to calculate the properties of the resonator. At the resonant wavelength λc1.556μm, the intrinsic quality factor Qinis about 3.9×104, and the mode volume Vmis about 1.55μm3. The corresponding resonance frequency and the intrinsic decay rate are ωc/2π192.67THz and κi/2π4.94GHz, respectively, yielding a total decay rate of κ=κex+κi2π×9.88GHz, where WGMs decay into the waveguide at the rate κexand κex=κiat resonance.

When the light enters the waveguide from port P1(P2) with transverse electric mode and excites the CCW (CW) WGMs, the evanescent fields of interest circulating around the sidewalls of the resonator are tightly confined in the transverse direction as a transverse magnetic mode. The e-field distribution and the OC of the microring resonator are numerically investigated by FDTD simulation. For a TE mode incident to port P1(P2), the intensity difference distribution Dis shown in Figure 6a–c. When the light enters the waveguide from port P1, the outer (inner) evanescent field of the WGM is σ+-(σ-) polarized, indicated by C11, as shown in Figure 6b. For the light incident to port P2, the polarization of the evanescent field is reversed, as shown in Figure 6d. Note that in this resonator, C>0.99from the surface of the outside wall to a position 280nmaway in the radial direction [17]. This large chiral area greatly relaxes the requirement for precisely positioning a QD. Importantly, the intensities of the evanescent fields near the outside wall are almost equal to that in the middle of the resonator, and they are still strong even at a position tens of nanometers away from the surface. These features of the resonator allow a strong chiral coupling between a nearby QD and the resonator.

Figure 6.

(a, c) Intensity difference D and (b, d) optical chirality C for light with λ = 1.556 μm . Here, to clearly show the chiral e-fields in the vicinity of the resonator and wipe off the negligibly weak background, we use the definition for C = E r ⋅ σ ̂ − 2 − E r ⋅ σ ̂ + 2 / E r 2 + ϱ , where we introduce a small bias, ϱ = max E r 2 × 10 − 4 , in the denominator. Light incident to port P 1 (a, b) and port P 2 (c, d). White lines are for the waveguide boundaries. Reproduced with permission from [17].

As seen in Figure 7, a negatively charged QD is doped near the outside wall of the resonator. It has two energy-degenerate transitions at λq1.556μm, driven by a circularly polarized e-field, as seen in Figure 8a. It can be an InAs self-assembled QD grown on silicon dioxide/silicon substrates [29], with two electronic spin ground states ±1/2and two optically excited states ±3/2.

Figure 7.

Schematic of the single-photon isolation based on a microring resonator. The silicon resonator couples to a nearby silicon waveguide with refractive index n = 3.48 and a single negatively charged QD. The resonator and the waveguide are 0.44 μm wide and 0.22 μm thick. The resonator has a 4.22 μm radius. The light incident to port P 1 ( P 2 ) drives the counterclockwise (CCW) [clockwise (CW)] WGM. The polarization of the evanescent field of the CCW mode is σ + - ( σ − -) polarized near the whole outside (inside) wall, while that for the CW mode is σ − - ( σ + -) polarized. After initialization for the QD, it is treated as a two-level system with σ + -polarized transition. Reproduced with permission from [17].

Figure 8.

Initialization of a negatively charged QD including two methods: Coherent population trapping (a–c) and optical Stark effect (d). (a) Four-level configuration of an electron spin in a single negatively charged QD. (b) Four-level configuration with dipole-allowed transitions, enabled by a magnetic field along the X direction. (c) The Trion system which has been pumped with linearly polarized light at the magnetic field can be treated as a two-level system only with σ + -polarized light excitation at zero magnetic field. (d) A σ + -polarized classical light Ω s with a detuning Δ s from the σ + -polarized transition ∣ 1 / 2 ⟩ ↔ ∣ 3 / 2 ⟩ is applied to shift the transition energy by Δ OSE ∝ Ω s 2 / Δ S . The σ − -polarized CW mode decouples from the QD because it is detuned by Δ − from the relevant transition ∣ − 1 / 2 ⟩ ↔ ∣ − 3 / 2 ⟩ . Figures are reproduced with permission from [17] and are slightly modified.

By initializing the QD in a specific spin ground state or shifting the transition energy with the optical Stark effect (OSE), chiral QD-resonator interaction can be achieved. As shown in Figure 8b, by applying a magnetic field along the direction perpendicular to the growth direction of the QD, the spin-flip Raman transitions are enabled and can couple to linearly polarized e-fields. In this case, the spin ground state 1/2or 1/2can be selectively prepared with a near-unity possibility [25, 30]. When the spin ground state, e.g., 1/2, is populated and the magnetic field is switched off, the QD can be treated as a two-level system with a dipole moment coupling only with a σ+-polarized e-field, as shown in Figure 8c. The second method involves all-optical control of the QD via the optical Stark control. The polarization-selective transition, 1/23/2or 1/23/2, can also be tuned to have different energies by inducing a large optical Start shift with a large detuned circularly polarized light [31, 32]. As shown in Figure 8d, the σ+-polarized transition is shifted by σ+-polarized classical light to be on resonance with the CCW mode, while the σ-polarized transition of the QD decouples to the resonator due to a large detuning Δ=Δc+2ΔOSE, where Δcis the detuning of resonator’s resonance and ΔOSEis the detuning which resulted from the OSE. In this case, the QD can also be treated as a two-level system with a σ+-polarized transition.

After QD spin ground state preparation, the QD strongly couples to the CCW mode with large strength g+but decouples from the CW mode with a much smaller strength g. Note that the OSE-based method allows an all-optical operation. In fabrication, the QD can be engineered to have various resonance wavelengths, dipole moments, and decoherence rates. Self-assembled quantum dots can be engineered to possess a transition at 1.556μm, and their dipole moment can vary from a few Debye to 40Debye [33]. Here, we choose the resonance wavelength λq1.556μm, ωq=ωc, and the dipole moment d=30Debye, yielding a spontaneous emission rate γq=d2ωq2/3πε0c3=2π×11.88MHz. The strength of the zero-point fluctuation of this mode is E0=ωc/(2ε0Vm)6.82×104V/m, where ε0is the vacuum permittivity and is the Planck constant. Correspondingly, the QD-resonator coupling strength g=dE0/2π×10.29GHz. And asymmetry coupling strength g+=αgand g=βg, where α=1C/2and β=1+C/2[17]. As a consequence, the QD-resonator system is chiral and subsequently achieves the optical isolator at the single-photon level.

The steady-state forward (backward) transition amplitude t+(t), corresponding to the left-handed (right-handed) input, is derived by using the single-photon scattering method [17, 27, 34]

t+=Δ˜cΔ˜cΔ˜qG2+Δ˜qκex2g+ghg+ghΔ˜qh2+ig2g+2κexΔ˜c+iκexΔ˜qΔ˜c+iκexG2g+ghg+ghΔ˜qh2,E9
t=Δ˜cΔ˜cΔ˜qG2+Δ˜qκex2gg+hgg+hΔ˜qh2+ig+2g2κexΔ˜c+iκexΔ˜qΔ˜c+iκexG2gg+hgg+hΔ˜qh2,E10

where Δ˜c=ωωc+iκi, Δ˜q=ωωq+iγq, and G2=g+2+g2. The detuning is defined as Δc=ωωcand ωc=ωqis assumed. In this device, C=0.99and hκi, the transmissions, T±=t±2, are shown in Figure 9. In the absence of the backscattering, i.e., h=0, at Δc=0, T+0.99and T0, yielding the insertion loss of L=10logT+0.04dBand the isolation contrast ϒ1. Consequently, at vanishing detuning, the single-photon isolation is achieved with almost zero insert loss and near-unity isolation contrast. The nonreciprocal bandwidth is about 1.3κ2π×12.8GHz, which is about two to three orders broader than those in [16, 18, 19, 20, 35]. It can be seen from Figure 9a that the nonreciprocal spectral window becomes narrower and narrower as the backscattering strength increases; for a relatively large backscattering h=κi, both the backward and forward transmissions only change very slightly, but for an extremely large backscattering h=3κi, the nonreciprocal performance is much affected. As shown in Figure 9b, in the absence of backscattering, the isolation contrast is quite robust, decreasing slowly from 1 to 0.8 as the OC changes from −1 to −0.5 (blue solid curve), while the insertion loss increases almost linearly in this region.

Figure 9.

(a) Steady-state transmissions for ∣ D ∣ = 0.99 . Blue (red) curves are for transmissions T + ( T − ), h = 0 (solid curves) for ∣ h ∣ = κ i (dashed curves), and ∣ h ∣ = 3 κ i (dotted curves). (b) Blue curve is for isolation contrast, and red dashed curve is for insert loss as a function of the optical chirality D for h = 0 (solid curves) and ∣ h ∣ = κ i (dashed curves). (c) Propagation of single-photon pulses incident to ports P 1 and P 2 simultaneously. Red thin (blue thick) curves are for the propagation of the right-moving (left-moving) single-photon pulses. Solid curves are for incident single-photon wave function, and dashed curves are for transmitted wave function. ∣ D ∣ = 1 for simplicity.

This device can achieve optical isolation when oppositely propagating photons enter the system at the same time, avoiding the dynamic reciprocity problem [36]. Numerical simulations for the propagation of single-photon wave packets incident to ports P1and P2simultaneously are performed by using wave-vector-space method [17]. The propagation of single-photon pulses in the system is shown in Figure 9c. At resonance, a right-moving single photon can pass through the system with transmission probability 0.98, while that of a left-moving single photon is only 0.02.

4. Optical isolation via chiral cross-Kerr nonlinearity

In a waveguide embedded with N-type atoms (see the upper waveguide in Figure 10a), the classical switching and coupling fields are applied to induce the phase shift ϕand amplitude modulation ξof the probe field. The forward and backward amplitude transmissions ξfand ξbare sufficiently different after the probe field passes through the ensemble of atoms. Thus, the type-IV optical isolator is achieved.

Figure 10.

(a) Schematic of the realization of optical isolator and circulator by using chiral cross-Kerr nonlinearity. To realize an optical isolator, we use only the upper waveguide (WG) embedded with a cloud of N -type atoms. The photon passing through the atoms suffers an amplitude transmission of ξ and a phase shift ϕ , which are dependent on its propagation direction. To achieve optical circulator, the lower waveguide is added to form a Mach-Zehnder interferometer with the upper one by using two beam splitters BS1 and BS2. (b) Energy-level diagram of N -type atoms. The switching (carrier frequency Ω s ), coupling ( Ω c ), and probe ( Ω p ) fields couple to transition ∣ 1 ⟩ ↔ ∣ 2 ⟩ , ∣ 3 ⟩ ↔ ∣ 2 ⟩ , and ∣ 3 ⟩ ↔ ∣ 4 ⟩ , with detunings Δ s , Δ c , and Δ p , respectively. Reproduced with permission from [20].

Rb atoms are used to create the chiral XKerr nonlinearity. In the 21transition, the 23transition, and 43transition of the Rb atoms with decay rates γ21, γ22, and γ43, respectively, γ21=γ23=γ43=γ0is assumed, and γ0Γ, where Γis the dephasing rates of both ground states 1and 3and γ0=2π×6MHz. The XKerr nonlinearity can be efficiently induced between the probe and switching fields in the configuration and can be modified by the coupling laser. As shown in Figure 10b, the switching (coupling, probe) field drives the transition 12(32, 34) with a detuning Δs(Δc, Δp) in the absence of thermal motion. The switching (coupling, probe) laser beam has the carrier frequency Ωs(Ωc, Ωp), corresponding to the wave vector ks(kc, kp). At room temperature, the inevitable random thermal motion of the jth atom moving with velocity vjinduces the “microscopic” Doppler shifts ksvj, kcvj, and kpvjin the corresponding atomic transitions, respectively. The strength of the nonlinearity is strongly dependent on the effective detunings, and thus the Doppler shifts. As a result, these frequency shifts change the optical nonlinearity in a way strongly dependent on the propagation direction of the probe field with respect to the switching and coupling fields, leading to the chiral XKerr nonlinearity. Both the switching and coupling laser beams are left-moving and ksvj=kcvjis assumed. Thus, the backward-moving (forward-moving) probe field “sees” the same (opposite) Doppler shift as the switching and coupling ones. Compared with the backward input case, where the Doppler broadening significantly reduces the total XKerr nonlinearity, the Doppler shift “seen” by the forward-moving probe field is partly compensated, and subsequently the nonlinearity remains large [20].

For a centimeter-scale medium, e.g., L=2cm, the medium is absorptive, and the forward and backward transmissions are very different, as shown in Figure 11a. As the probe detuning increases, the forward transmission T12rapidly increases to 0.80 at Δp=35.6γ0, corresponding to an insertion loss of 1 dB. As a result of Doppler broadening, the backward transmission T21is much smaller than T12, when 35.6γ0<Δp<60.6γ0. In this region, the insertion loss is smaller than 1 dB, while the isolation ratio is larger than 15 dB. The isolation ratio can be considerably improved with a large forward transmission by using a longer medium or, equivalently, increasing the density of the atoms. For L=4cm, the isolation rate can reach more than 30 dB in the range of 50γ0<Δp<60γ0, yielding an isolation bandwidth of 2π×60MHz. At the same time, the insertion loss is less than 1 dB. As a consequence, an isolation can be achieved by using this medium.

Figure 11.

(a) The transmission of the isolator for forward-moving (blue curves) and backward-moving (red curves) probe fields as a function of the probe detuning Δ p . Green curves are for the isolations. Solid (dashed) curves are for the length of medium L = 2 4  cm. (b) Amplitude transmissions (red curves) and phase shifts (blue curves) for forward-moving (solid curves) and backward-moving (dashed curves) probe fields as a function of Δ p . (c) Green curves are for fidelities, and blue dashed curves are for average insertion loss as a function of Δ p . The vertical black dashed lines in the two figures show the optimal detuning Δ p opt = 7.77 γ 0 . The length of medium is 3.33 mm. Other parameters N a = 5 × 10 12 cm − 3 , Γ 3 = 0.1 γ 0 , Ω c = 20 γ 0 , Ω s = 4 γ 0 , and δ = 0 are fixed. Reproduced with permission from [20].

By carefully choosing the density and length of the atomic vapor, and properly arranging the switching and coupling fields, a phase shift difference, Δϕ=ϕfϕb, can approach πwith high transmissions ξfand ξb. It can realize a four-port optical circulator by adding a lower waveguide to form a Mach-Zehnder interferometer (MZI), as seen in Figure 10a.

For a short medium (L=3.33mm), the transmission of the forward- and backward-moving probes can be comparably high, but the phase shift ϕbis always small, specifically about 0.011πat Δp=7.77γ0, as shown in Figure 11b. In contrast, at the optimal point Δpopt=7.77γ0, the difference of the phase shift, ϕfϕb, reaches the optimal value of π. At the same time, ξfoptξbopt0.66. As a result, a high-performance circulator can be realized by inserting this nonlinear medium into a MZI composed of unbalanced BSs. In the lower waveguide, a phase shift ϑ=0.01πis added to compensate the phase shift of the backward-moving photon in the upper one. As shown in Figure 11c, when the detuning Δpvaries from 6γ0to 20γ0, the fidelity Ffirst rises up rapidly, reaches the maximum 0.944 at Δpopt=7.77γ0, and then decreases. At the same time, the average photon survival probability ηincreases from 0.68 to 0.83. Although the photons have a larger probability to survive at a large detuning, the fidelity is low. Thus, there is a trade-off between the fidelity and the survival probability. The circulator operating within the frequency range 6.6γ0<Δp<9.7γ0can achieve a fidelity larger than 0.9 at the expense of η>0.69. The corresponding working window is about 2π×20MHz, and the average insertion loss is about 1.6 dB. At the Δpopt, it obtains a fidelity F=0.944and a survival probability η=0.72, yielding an insertion loss of 1.42 dB. The circulator can also be quantified by the isolations Fi=41.7,13.8,13.8,8.2dBwith i=1,2,3,4(see Eq. (7)), implying nonreciprocal photon circulator along 12341.

The proposal can achieve the nonlinear optical isolation without dynamic reciprocity [36], because the XKerr nonlinearity itself is chiral and the isolation is based on linear equations [20]. According to this proposed method, the device that uses XKerr nonlinearity to achieve cavity-free optical isolator and circulator at ultralow light level has been demonstrated experimentally [21].

5. Conclusions

In this chapter, we introduce the optical chirality of light confined around nanophotonic structures and the chiral optical XKerr nonlinearity induced in atoms. Based on optical chirality, we propose single-photon isolators and circulators with chiral light-emitter interaction. These concepts have been demonstrated experimentally. Then we showed approaches to achieve an optical isolator and a circulator by using the chiral XKerr nonlinearity. All of these approaches can realize chip-comparable optical isolations with low insertion loss and high isolation performance. The methods also work at ultralow light level and even single-photon level. These optical isolators and circulators may pave the way for photon routing and information processing in a nonreciprocal way in integrated optical circuits and quantum networks.

Acknowledgments

K. X. thanks the support of the National Key R&D Program of China (Grant No. 2017YFA0303703) and the National Natural Science Foundation of China (Grants Nos. 11874212 and 61435007). He also thanks his co-workers, in particular, Prof. Jason Twamley, Prof. Yong Zhang, Prof. Min Xiao, and Prof. Franco Nori for their essential contribution to the original works.

OCoptical chirality
WGMwhispering-gallery mode
QDquantum dot
OSEoptical Stark effect
CCWcounterclockwise
CWclockwise
FDTDfinite-difference time-domain
XKerrcross-Kerr
MZIMach-Zehnder interferometer
BSbeam splitter

Download

chapter PDF

© 2019 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution 3.0 License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to cite and reference

Link to this chapter Copy to clipboard

Cite this chapter Copy to clipboard

Lei Tang and Keyu Xia (December 3rd 2019). Optical Chirality and Single-Photon Isolation [Online First], IntechOpen, DOI: 10.5772/intechopen.90354. Available from:

chapter statistics

14total chapter downloads

More statistics for editors and authors

Login to your personal dashboard for more detailed statistics on your publications.

Access personal reporting

We are IntechOpen, the world's leading publisher of Open Access books. Built by scientists, for scientists. Our readership spans scientists, professors, researchers, librarians, and students, as well as business professionals. We share our knowledge and peer-reveiwed research papers with libraries, scientific and engineering societies, and also work with corporate R&D departments and government entities.

More About Us