Open access peer-reviewed Edited Volume

Titanium Alloys

Novel Aspects of Their Manufacturing and Processing

Edited by Maciej Motyka

Rzeszów University of Technology

Co-editors:

Waldemar Ziaja

Rzeszów University of Technology

Jan Sieniawski

Rzeszów University of Technology

Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.

Read more >Order hardcopy
IntechOpen
Titanium AlloysNovel Aspects of Their Manufacturing and ProcessingEdited by Maciej Motyka

Published: November 27th 2019

DOI: 10.5772/intechopen.78626

ISBN: 978-1-83962-553-4

Print ISBN: 978-1-83962-552-7

eBook (PDF) ISBN: 978-1-83962-554-1

Copyright year: 2019

Books open for chapter submissions

4574 Total Chapter Downloads

2 Crossref Citations

1 Web of Science Citations

6 Dimensions Citations

chaptersDownloads

Open access peer-reviewed

1. Introductory Chapter: Novel Aspects of Titanium Alloys’ Applications

By Maciej Motyka, Waldemar Ziaja and Jan Sieniawski

467

Open access peer-reviewed

2. Modern Production Methods for Titanium Alloys: A Review

By Hamweendo Agripa and Ionel Botef

1086

Open access peer-reviewed

3. Microstructure and Mechanical Properties of Laser and Mechanically Formed Commercially Pure Grade 2 Titanium Plates

By Kadephi Vuyolwethu Mjali and Annelize Botes

357

Open access peer-reviewed

4. Processing of Beta Titanium Alloys for Aerospace and Biomedical Applications

By Sudhagara Rajan Soundararajan, Jithin Vishnu, Geetha Manivasagam and Nageswara Rao Muktinutalapati

879

Open access peer-reviewed

5. Characteristics of the Dissipation of Energy at Hot Plastic Deformation of Near-Alpha Titanium Alloy

By Mikhail Mikhaylovich Radkevich, Nikolay Rafailovich Vargasov and Boris Konstantinovich Barakhtin

244

Open access peer-reviewed

6. Surface Treatment of Titanium Alloys in Oxygen-Containing Gaseous Medium

By Vasyl Trush, Viktor Fedirko and Alexander Luk’yanenko

402

Open access peer-reviewed

7. Sustainable Machining for Titanium Alloy Ti-6Al-4V

By Imran Masood

495

Open access peer-reviewed

8. The Comparison of Cutting Tools for High Speed Machining of Ti-6Al-4V ELI Alloy (Grade 23)

By Chakradhar Bandapalli, Bharatkumar Mohanbhai Sutaria and Dhananjay Vishnu Prasad Bhatt

648

Edited Volume and chapters are indexed in

  • Worldcat
  • OpenAIRE
  • Google Scholar
  • AZ ebsco
  • Base
  • CNKI

Order a hardcopy of the Edited Volume

Free shipping with DHL Express

Hardcover (ex. VAT)£119

Order now

Residents of European Union countries need to add a Book Value-Added Tax of 5%. Institutions and companies, registered as VAT taxable entities in their own EU member state, will not pay VAT by providing IntechOpen with their VAT registration number. This is made possible by the EU reverse charge method.

Special discount for IntechOpen contributors

All IntechOpen contributors are offered special discounts starting at 40% OFF available through your personal dashboard

Login and purchase