Open access peer-reviewed chapter

Economic Development of Rural Communities in Sub-Saharan Africa through Decentralized Energy-Water-Food Systems

By Johannes Winklmaier, Sissi Adeli Bazan Santos and Tobias Trenkle

Submitted: February 6th 2019Reviewed: November 8th 2019Published: January 11th 2020

DOI: 10.5772/intechopen.90424

Downloaded: 154


Access to electricity is essential for humanity to develop. Nowadays, 600 million people in sub-Saharan Africa (SSA) have no access to energy services, most of them living in rural areas. However, this region has an outstanding solar potential that could unlock cheap power generation through solar power systems. This raises the question of how rural communities in Africa could avail the benefits of renewable energy systems to gain access to electricity and develop sustainable and productive activities around while facing low purchase power, high interest rates, and high investment costs. The concept of decentralized energy-water-food system proposes a solution: it enables renewable energy access with biomass and solar energy for the private power of the local community, provides secure water supply and year-round irrigation, and increases their livelihood through the profitability of farming and generation of jobs. The concept is applied to a case study in rural Ghana and the least-cost design is obtained. An economic feasibility analysis is carried out on the evaluation of profitability and the total financial value generated for the main stakeholders. The results portrait the economic advantages of the proposed concept design—a hybrid solar-biogas system—to deliver affordable electricity, water, and food supply.


  • rural electrification
  • economic model
  • hybrid energy system
  • sustainable development
  • least-cost optimization
  • agricultural productivity
  • water-food-energy nexus

1. Introduction

In 2017, internal migration was estimated at 1 billion people in developing countries. Rural to urban migration is at the core of this displacement [1]. Rural migration is “one of the main coping and survival mechanisms that is available to those affected by environmental degradation and climate change” [2], an important component of rural livelihoods’ strategies to couple with poverty, food insecurity, lack of employment and income-generating opportunities, and inequality, among the root causes [3]. In sub-Saharan Africa (SSA) rural migration counts at least for 75% of all internal movements [4]. Not without reason, migration is particularly important in this rural-dominated society. Most of rural communities driven to migration in SSA have still traditional rain-fed farming as the main source for income and food security, and their livelihood is characterized by inadequate infrastructure—including the reliable provision of mobility and services such as electricity and water access [3, 5]. These factors, added to exposure to climatic change on farming, push rural dwellers to escape low-productive and climate-vulnerable agriculture, searching the opportunity to raise their level of income. Indeed, according to the last report of rural migrants’ profiles of the FAO, around 60% of rural household members in SSA earn less than 1 USD per day and increase their earning to 2 USD per day per rural migrant from the change of main economic activity and access to basic infrastructure [5]. The search for better income-generating activities to cover basic human needs as food, water, and energy supply is hence a crucial motivation.

Decentralized energy-water-food systems (EWFS) propose a sustainable mechanism to improve living conditions in rural communities with the supply of electricity, water, and food using renewable resources and catalyze community welfare by investing in infrastructure for agricultural productivity. This concept was presented in [6, 7], which introduced the theory of techno-economic linear modeling and least-cost design of EWFS. Based on two case studies on rural Zimbabwe and Ghana, both contributions showed the positive effects of sector coupling models on the total system costs.

1.1 Contribution

On the basis of this preliminary work, this chapter formalizes the concept model framework of decentralized energy-water-food systems and presents an analysis of their economic feasibility based on least-cost optimization and scenario analysis, the latter based on the variability of interest rate and energy system design. The aim is to analyze the capability of EWFS to provide economic-feasible solutions for rural electrification in contrast with existing state-of-the-art solutions and assess its financial attractiveness for major stakeholders.

The next section addresses the root motivation of this work, the role of electricity access for sustainable economic development, and presents the challenges met by the public and private sector in providing it to the rural communities. Section 3 deals with the EWFS’ concept and the modeling of its least-cost design. Lastly, Section 4 evaluates the economic feasibility of EWFS based on the variability of the weighted average costs of capital and on the change in system design. The scenario development will show that fully fledged EWFS is the most superior system design to achieve long-term economic sustainable development by enabling the access to electricity and water and increasing agricultural productivity with the lowest annual system costs.

2. The energy access paradigm on rural economic development in sub-Saharan Africa

“Access to affordable, reliable, and sustainable energy for all” is the seventh United Nations Sustainable Development Goal and a key enabler of economic growth and human development [8]. The clear correlation of higher poverty level with lower electricity access is estimated to catalyze the private and public investment of 6 billion USD per year over the 2017–2030 period towards electrification in SSA [9, 10]. While progress is being made, there are still around 600 million people in sub-Saharan Africa without access to electricity, over 80% of them living in rural areas [9]. Meanwhile, rapid population growth is estimated to offset the electrification efforts in the period up to 2030: more people in SSA would lack access to electricity than today; 90% of them would be living in rural areas [9].

Targeting electrification in rural areas is a resulting policy strategy to outperform the forecasts and enable the economic development that electricity access could potentially provide to these areas. One dominant strategy is the expansion of national power grid, which has accounted for 97% of new electricity connections since the year 2000; however, it is focused until now in urban areas [9]. Solar-based off-grid systems are the second strategy as SSA receives some of the highest levels of solar irradiation worldwide, with outstanding values of up to 2500 kWh/m2 annually [5]. These systems, ranging to a power capacity of 5 MWel, offer a cost-effective solution due to the rapidly declining costs of solar photovoltaic systems (PV) and the improvement of their efficiency in energy conversion [11, 12]. However, there are still obstacles in both strategies for the allocation of investment by the public and private sector. Low and dispersed population, low per capita electrical demand, high costs, and efficiency losses of high-voltage transmission lines and distribution networks make rural areas an expensive strategy in the centralized electrification process and rarely economically attractive for electric utilities [13]. In addition, developing countries deal with the lack of sufficient generation capacity, poorly maintained network infrastructure, and the limited ability of rural households to afford the connection charges [10]. Shifting the paradigm towards off-grid solar-based solutions has not yet made a significant contribution on tackling energy poverty in rural areas either [14]. Solar home systems and other solutions tailored to the low payment capacity of the rural population offer the most basic private power, usually for lighting. This access does not enable economic development [15]. As shown in Figure 1, 1000 kWh per person are need for a medium human development, which is not achieved by the provision of light alone. Conversely, off-grid renewable solutions tailored for agriculture and other productive uses, which could potentially create jobs and increase the income level of the community, require a high upfront investment. This, coupled with interest rates of 15% and higher, depicts an unattractive high-risk investment for the private sector and an unattainable barrier for rural households, which are constrained by their low purchase power [17].

Figure 1.

Macro-level correlation between electricity and human development [16].

These challenges require electrification strategies of holistic nature, one that “plans to meet the targets for household electrification taking into account other development goals and opportunities to use energy access to stimulate economic activity” [9]. In the absence thereof, rural electrification may not bring the economic development it promises.

3. Decentralized energy-water-food systems

Decentralized energy-water-food systems are the proposed solution for rural farmers in SSA to provide the necessary amount of electricity that fosters a higher level of human development. It addresses the low purchase power of the local community, gives renewable-based power access as pillar for human development, and increases the income of local community through agricultural productivity. It is based on the water-energy-food nexus, a conceptual framework for integrated resource management, which took particular prominence in 2011 as a wake-up call reacting to the forecast of a worldwide increasing resource demand, climate change, and the awareness of the unsustainable stress on scarce resources (energy, water, and food) [18]. As a result, it supports the coordination and management of the three sectors and the decision-making process under the consideration of synergies and trade-offs between the three resources when dealing with human development challenges [19]. This system thinking has from henceforth had an impact on the new policy frameworks, business assessment methods, and modeling tools, specially addressing challenges in the urban context and the multi-sectoral use of energy [20]. However, the application of this approach in the context of rural development of farming communities is limited. Due to the transformational effect of the nexus thinking [21], it deserves the formalization of a concept framework that is suited for rural farming communities and for sustainable economic development.

The model scheme for a decentralized energy-water-food system with their major inputs and outputs is depicted in Figure 2. Key system characteristics are:

  1. Hybrid power system

  2. Electric water pumps

  3. Yield optimizing and sustainable agriculture

  4. Biogas generation through agricultural waste

Figure 2.

Business model scheme of decentralized energy-water-food systems. Major inputs and outputs as well as system boundaries, technological components, and commodity flows are depicted. Modified from [6, 7].

The combination of the photovoltaic battery and biogas system provides electricity to meet the private demands of a community. Because the deployment of diesel generators in off-grid villages is widespread [22], it is considered in this concept as well (1). Private power is provided free of charge in a first step and priced to cover potential system losses if needed. The hybrid power system generates enough power to operate electric groundwater pumps (2), powered mainly with cheap solar energy enabled by the strong global irradiation in SSA and by the flexible load management of water pumps. These pumps supply the community with domestic water demand. In this concept, up to 50 liters per day and capita are provided free of charge to meet the drinking and sanitation water right standards [23]. The pumps supply also all-year irrigation under the consideration of arable land and groundwater use constraints. Community farmers are able to grow crops independent of the rainfall pattern. This allows multiple harvests per year for selling to the domestic or external market participants (3). The resulting higher agricultural productivity leads also to an increase in biomass waste, which is fermented into biogas and later converted into electricity (4). As a by-product, the biogas digestion process produces fertilizer that is used for agricultural purposes.

As a result, the rural community not only has gained access to electricity and domestic water supply but also secures the year-round supply of water for productive uses and food. In the medium to long term, the improved agriculture has the potential to create fair-paid jobs, increase the community’s purchasing power, lead to a higher standard of living, and provide economic opportunities [12]. This concept also suggests that the high, so far unaffordable, investment costs for infrastructure development can be repaid by the local population through their revenues in agriculture as crops yield increase by up to 300% with regular irrigation [24]. After paying the system investment and operational costs, profits are distributed to the local community. Besides this socioeconomic benefits, preliminary studies of this concept in [6, 7] showed that due to the high resource potential of solar and biomass, the cheapest power generation is based to over 90% on renewable energies.

3.1 Least-cost design of decentralized energy-water-food systems

Decentralized EWFS have potential to deliver social, environmental, and economic returns. The sector coupling causes an unavoidable complexity in designing EWFS, specially when the lowest cost and technical feasibility are to be guaranteed. Optimization models facilitate the engineering effort to provide basic dimensions for the system implementation. These models are the state of the art for rural electrification as they enable stakeholders to understand, evaluate, and ultimately make decisions about the system setup [25, 26]. To date, there are only a limited number of models accessible to researchers that address all three resources of an EWF system together, and most tools cannot be customized to the specific environmental and economic characteristics of the respective project location [27]. The contribution [6, 7] addressed the adaption of urbs, an economic model, which was originally designed by the Chair of Renewable and Sustainable Energy Systems of the Technical University of Munich (ENS) for distributed energy systems. Urbs has a well-documented mathematical description; it is open-source and can be used for cross-sectoral models in any spatial and temporal resolution [28]. Hence, it is used to conduct the economic feasibility analysis aimed in this work.

urbs is a linear optimization tool programmed in Python and identifies the optimal system configuration based on the minimization of the total system costs resulting from the techno-economic modeling of each process and storage technologies in the system. Figure 3 gives an overview of the urbs model for decentralized EWFS.

Figure 3.

Work flow to obtain least-cost design of decentralized energy-water-food systems with programming tool urbs. A business analysis is derived from the output results.

It requires three kinds of input data. Site data is defined by the demand, solar and rainfall time series, techno-economic parameters of the processes and storages as depicted in the EWFS model schema (Figure 2), and lastly the market prices of the commodities that can be bought or sold between the system boundaries. This data is read by urbs, which already has an implemented script adapted to model EWFS with a linear approach [7], and the total system costs are optimized. The output data includes the installed capacities related to the three sectors, the commodity flows, total revenues, and costs. A pre-feasibility analysis can be conducted on the basis of these results to evaluate the business attractiveness and ensure a sustainable project operation.

4. Economic feasibility of decentralized energy-water-food systems: case study Kpori

The northern region of Ghana is selected as case study. Although Ghana has a relatively high national electrification rate of 82.5% (2016), there is a drastic regional contrast between urban and rural areas within the country [29]. While the urban Greater Accra area has the highest regional electrification rate of 85%, the three northernmost, sparsely populated regions have an average electrification rate of only 30% [30]. These rural areas are the most expensive regions to be connected to the main grid and therefore particularly suitable for off-grid energy solutions. Since rural northern Ghana is characterized by high solar radiation and high agricultural activity, the use of solar photovoltaics and the coupling of the energy sector to the water and food sectors promise great productivity potential.

Kpori is a village of about 300 inhabitants in the West Gonja District in the north of Ghana. It is an off-grid village with no access to the national energy network, water infrastructure, or telecommunications network. Although agriculture is their main economic activity and livelihood, farming in Kpori is 100% rainfall dependent. At the same time, domestic water supply relies on rainwater harvesting and hand pumps. As a result of a significant drop in rainfall and an increase in temperature over the last century, the already climatically stressed region is dependent on drought-resistant plants such as maize and sorghum. According to on-ground questionnaire, Kpori’s inhabitants have an annual income per capita below the lower poverty line of 208 USD/year [31].

4.1 Model input

As depicted in Figure 3, urbs already includes the EWFS model and optimization script. The input data needed about Kpori are the following:

  • Demand time series: Residential electricity, domestic water, food

  • Supply time series: Solar irradiation, rainfall

  • Technical parameters: Efficiency, capacity, and lifetime of machinery and storage units

  • Economic parameters: Weighted average cost of capital (WACC), investment cost, fixed cost, variable cost, purchase cost, and fuel cost of machinery and storage units

The community demand for residential electricity and domestic water is determined by the approx. 300 Kpori inhabitants distributed over 70 households with an average household size of 4.4 [32]. The hourly private power demand is obtained by a Monte Carlo simulation based on the hourly utilization probability of residential appliances and their rated power. This data was obtained from an on-site survey on the nearest electrified farming community. The results of Figure 4 show a typical load profile of a farming community with a total annual consumption of 42.5 MWh or 138 kWh per inhabitant.

Figure 4.

Time series electricity demand for a Kpori house obtained with Monte Carlo simulation.

Domestic water demand is set to 50 liters per day and person based on the drinking and sanitation water right standards [23]. Daily food demand is modeled as 658 g of maize grain per inhabitant, which covers the minimum dietary calorie intake of 2400 kcal [33]. In Kpori, up to 263 tons of maize grain can be produced annually on the domestic farmland due to the maximum capacity of arable land of 15 ha. Mismatches in food supply and demand can be balanced by selling or purchasing maize grain on external markets for 200 USD per ton. Additionally, maize stover and chicken manure is fermented into biogas. The capacity of the biogas digestion process is limited to 367.5 kg/day due to the amount of manure available from approx. 3000 chickens in a nearby town. The solar and rainfall time series are obtained by data from geographical information systems (GIS) or online data bases.

The technical and economic parameters for all technologies depicted in Figure 2 are listed in the Appendix. Lastly, the weighted average cost of capital is assumed to be at the market rate of 15% according to the study [17].

4.1.1 Scenario development

The proposed scenario development, summarized in Table 1, evaluates the economic feasibility of a EWFS for sustainable project operation and as an attractive investment for its stakeholders. The base scenario (S1) analyzes these factors for a complete EWFS, as designed in Figure 2, with a cost of capital at the average market rate of 15%, the integration of all power generation technologies (diesel generators, solar photovoltaics, and biogas generators), and the coupling of the three sectors: energy, water, and food. Secondly, the system’s sensitivity to changes in the cost of capital is tested through a parameter variation for discrete values between WACC 0% and WACC 30% (S2). The WACC variation serves as an appropriate starting point to evaluate the economic attractiveness of a decentralized EWFS in SSA. Indeed, there are highly investment-intensive installations related to an EWFS, and the WACC is therefore of great relevance. The third analysis tests the changes of power-generating technologies in the system design. It compares the fully fledged EWFS, in which electricity is generated from diesel, solar, and biogas, with a system without biogas and a system based exclusively on diesel.

Scenario titleWACC (%)TechnologiesSectors
S1: Base scenario15DG + PV + BGE + W + F
S2: WACC variation0–30DG + PV + BGE + W + F
S3: Technology variation0, 15, 30DG,DG + PVE + W + F

Table 1.

Modeled scenarios.

4.2 Optimization results

The techno-economic results for all scenarios are listed in the Appendix.

4.3 Results of base scenario S1

Starting with a look on the economics of the base scenario depicted in Figure 5, the total system costs (52,562 USD) slightly exceed total revenues (52,560 USD) by 2 USD—the profitability break-even point is almost reached. In this scenario, the maximum field capacity of 15 ha is utilized, covering the entire domestic food demand (70 tons) and selling the remaining 193 tons to external market participants. Maize grain is sold to the domestic community at the market price of 200 USD per ton and accounts for one quarter of total revenues. On the cost site, the biggest contributor is labor costs related to agriculture, which accounts for 37% of the total costs. The second biggest contributor is investment costs, 30% of total costs—consisting of depreciation expenses (9%) and cost of capital (21%). Diesel expenses (fuel costs) account for 12% of total costs.

Figure 5.

Costs and revenues for EWFS with WACC = 15%.

Provided that the domestic community purchases its food from the system and water is provided free of charge, the 2 USD loss must be allocated to the total domestic electricity consumption of 42.5 MWh/year equaling an electricity fee of 0.01 USD/kWh. The total annual costs for energy, water, and food equal 45.52 USD per capita.

Total capital expenditure (CapEx) for long-term assets amount to 98.4 k USD, which is only 30% of the cumulative investment costs over the respective useful life of the assets. The remaining 70% of the cumulative investment costs originates from the WACC and is distributed to investors. Analyzing the annual investment costs on a technology level, as depicted in Figure 6, it is observed that the majority of the annual investment costs is invested in electricity-related technologies (53%), while 38% is spent on food-related assets and 10% on water-related assets. Within the costs for energy-related investments, the majority (55%) is invested in solar photovoltaics and only 5% in nonrenewable electricity generation technologies (diesel generator). However, the diesel generator accounts for a drastically greater share of total installed capacity (14%) then of total investment costs (5%) illustrating the low specific investment costs of this technology. In contrast, the relatively lower ratios of installed capacity to investment costs for photovoltaic and biogas systems reflect the high CapEx intensity of renewable energy technologies.

Figure 6.

Investment costs and capacities of power generation technologies.

The unit costs of the respective commodities, as shown in Table 2, depict that the costs related to producing 1 ton of maize grain (164 USD) are below the sales price of 200 USD. The profit generated from this revenue-cost difference is used to provide water free of charge and subsidize electricity prices to the domestic community. The unit cost of electricity (LCOE) is at 0.22 USD/kWh. Due to the relatively high cost of capital as well as the CapEx-intensive photovoltaic and battery system, LCOE from PV (0.18 USD/kWh) is still above values around 0.13 USD/kWh, which is the benchmark for small-scale PV systems in Germany [34]. Sufficient profits from maize grain production enable an almost complete subsidization of electricity for the local community and burden households with only 0.03 USD for electricity per year to cover the loss of the system.

Electricity totalUSD/kWh0.22
Electricity from diesel generatorUSD/kWh0.41
Electricity from solar photovoltaicsUSD/kWh0.18
Electricity from biogas generatorUSD/kWh0.14

Table 2.

Unit costs of electricity, water, and food.

The financial attractiveness of the project for all major stakeholders is shown in Table 3. This analysis does not include a financial valuation of the water and electricity that is provided to the domestic community free of charge, nor does it account for social and environmental value added. Some system expenses can be considered as income to the respective shareholders. Consequently, labor expenses of 19,426 USD are income to the domestic community. The system loss of 2 USD is allocated among the entire domestic community. The net cash flow from labor and system losses to the community of 19.4 k USD exceed total community expenses of 14 k USD for food. Annual returns to investors of 10.9 k USD match the market cost of capital (15%). The total financial value added to the main stakeholders amounts to 30.3 k USD per year.

StakeholderFinancial value generated [USD/year]
Return to investors10,869
Total financial value generated [USD/year]30,293

Table 3.

Total financial value generated.

Altogether, the base scenario presents an economically feasible solution to provide the domestic community of Kpori with electricity and water free of charge as well as to produce enough maize grain to meet the domestic demand and sell crop surpluses on an external market. Total funds of 98.4 k USD must be raised to finance long-term assets. The maximum capacity of farmland and biogas is utilized; 82% of the consumed electricity is from renewable resources.

4.4 Results of WACC variation scenario S2

Profit overview illustrates an almost linear relationship between the cost of capital and the system profitability. Results show that for all scenarios between WACC 0% and 20%, the cost-minimizing system is designed in a dimension that the maximum farmland capacity of 15 ha is cultivated. Consequently, the annual demand and supply for all three resources energy, water, and food are almost constant at 80 MWh, 205,000 m3, and 263 tons, respectively. For the WACC 30% scenario, maize grain production is still at 104 tons per year and hence more than sufficient to meet the annual domestic demand of 70 tons. The domestic demand for electricity and water remains constant, but cultivable farm land decreases.

Figure 7 provides an overview of the annual revenues and costs of the respective profit maximizing system design. Revenues move proportionally to the food production, remaining constant all through the WACC 20% scenario (52.6 k USD), and decrease by 60% for WACC 30% to 20.9 k USD per year. Agriculture-related labor costs and other operating costs move in line with revenues, accounting for approx. 37 and 21%, respectively. Investment costs and fuel costs increase with higher WACC as they cover investor returns and an increase in consumed diesel; thus, investment costs and fuel costs are the main drivers of profitability.

Figure 7.

Costs and revenues for EWFS for WACC variation from 0 to 30%.

Figure 8 shows the EWFS profitability. A fully socially financed system (WACC 0%) generates 14.1 k USD in annual profits, equivalent to a profit margin of 27%. In the case of a WACC 10%, which could represent the support of a financial cooperative, costs would increase by 24%, resulting in an annual net profit of 4.8 k USD, equivalent to a 9% net profit margin. The profit break-even point is reached for a WACC value slightly below the expected market rate of 15%; for WACC 15% a net loss of 1.8 USD is generated. Under the premise of free electricity and water, increasing net losses are generated for WACC values greater than 15%, which implies that the business model is no longer economically sustainable. For the scenario of WACC 30%, costs exceed revenues by the factor of 0.5, resulting in an annual net loss of 10.4 k USD. The profit overview illustrates an almost linear relationship between the cost of capital and the system profitability. An increase in WACC by one percentage point results in a decrease in profits by 880.42 USD.

Figure 8.

EWFS profitability for WACC variation from 0 to 30%.

Regarding the cost analysis, investment costs are the only cost category factored in the cost of capital, as it is assumed that all other expenses can be financed internally going from period to period. Consequently, it is intuitive that with an increase in cost of capital, the system design shifts towards CapEx-light technologies. Therefore, the share of CapEx in the cumulative investment costs continuously decreases, and the share of investment costs in total costs tendentially increases (Figure 9). This in turn implies that investment costs are generally impacted stronger by the increasing returns to investors than by the reduction in CapEx. Nevertheless, there are some exceptions which explain the dip around WACC 16% where the increase in cost of capital is overcompensated by a drastic decrease in CapEx of 11%. Highest capital expenditures and thus largest external funding requirements occur in the WACC 0% scenario, in which 139.0 k USD is invested in long-term assets. With an increase in WACC, the required funding decreases by 70% to 41.7 k USD in the WACC 30% scenario. At the WACC market rate of 15%, total required funding amounts to 98.4 k USD and accounts for 30% of cumulative investment costs. Figure 10 shows the variation of process capacity and electric power generation with the increase of WACC. Since PV is the most CapEx-intensive power generation technology with 1400 USD/kW of installed capacity followed by the biogas generator with 675 USD/kW and diesel generator with 500 USD/kW (see Appendix), PV is continuously substituted by diesel generators as the WACC increases. With the decrease in installed capacity of the inflexible but volatile solar power source—and the limited storage capacity due to high investment costs related to the corresponding battery system—diesel-generated electricity increases as biogas is already fully utilized. For low WACC values, diesel power accounts for only a small share of the total electricity, but starting at WACC 13%, diesel-generated electricity already accounts for a substantial share of 12% and continues to increase to around one third of total produced electricity for WACC 20%. Biogas capacity and energy remain almost constant at their maximum levels.

Figure 9.

Capital expenditure and cumulative investment costs for WACC variation from 0 to 30%.

Figure 10.

Process capacities and electric power generation for WACC variation from 0 to 30%.

Table 4 outlines the variation of the unit costs of electricity, water, and food with increasing WACC. With an increase in WACC, the weighted average LCOE increases from 0.08 USD/kWh (WACC 0%) to 0.29 USD/kWh (WACC 30%). This is not only because the LCOE from PV and LCOE from biogas system (BG) increase by a factor of 3.9 and 2.6, respectively, but predominantly because the electricity mix shifts from the relatively cheaper technologies with high CapEx (PV and BG) to the more expensive but investment light diesel generator (DG). The LCOE from DG slightly decrease from 0.46 USD/kWh (WACC 0%) to 0.41USD/kWh for WACC 15% before again increasing to 0.45 USD/kWh (WACC 30%). This variation in LCOE from DG is related to the opposing impact of an increasing utilization rate and increasing specific investment costs. The development of LCOE is also reflected in the development of the unit costs of water and food as both—the access to water and the production of food—require a substantial amount of electricity.

Electricity totalUSD/kWh0.080.220.29
Electricity from diesel generatorUSD/kWh0.460.410.45
Electricity from solar photovoltaicsUSD/kWh0.080.180.31
Electricity from biogas generatorUSD/kWh0.080.140.22

Table 4.

Unit costs of electricity, water, and food.

The total financial value generated, visualized in Figure 11, includes the system costs 19.4 k USD (WACC 0–20%) of annual labor expenses related to farming that can be paid to domestic workers. Because the WACC 30% scenario does not utilize the maximum farmland capacity, labor costs are as low as 7.7 k USD. As the WACC represents the relative return to investors, this increases as long as CapEx decreases slower than the increase in cost of capital compensates for. Net profits to the domestic community behave reversely and decrease with an increasing WACC. The maximum total financial value added by the system to the major stakeholders is reached for WACC 0%, where the annual cumulative financial value added to the domestic community and investors adds up to 33.5 k USD and continuously decreases from there on.

Figure 11.

Total financial value generated for WACC variation from 0 to 30%.

For WACC 0%, the system profits of 14.1 k USD are distributed to the domestic community, corresponding to 45.61 USD per capita—0.10 more than the total expenses required for food. The market-based financing scenario (WACC 15%) breaks even (net loss of 1.8 USD). A finance system with WACC 30% generates a loss of 10.4 k USD, which implies an electricity price of 0.25 USD/kWh or annual costs of 33.84 USD per capita for electricity and total costs of 79.45 USD per capita for energy, water, and food.

Altogether, there is a strong impact of the costs of capital on the financial and technical parameters of the system. The maximum field capacity is utilized up to the WACC 20% scenario, and even for WACC 30%, the food production of a least-cost system would be sufficient to meet the domestic demand. An increase in the cost of capital by 1% leads to a decrease in system profits by 880 USD. The required funds to finance long-term assets amount to 139.0 k USD for WACC 0% and decrease from there on as CapEx-intensive technologies such as PV are increasingly substituted with investment light technologies such as diesel.

4.5 Results of technology variation scenario S3

The costs, revenues, and profit for scenario S3 are depicted in Figure 12. For WACC 0%, the cost-minimizing system is designed in a dimension that the maximum farmland capacity is utilized, regardless of the available power generation technologies. Since revenues are directly proportional to the maize grain production, annual revenues are constant at 52.6 k USD. It can be clearly seen that system costs rise with the constraints on combination of power generation technologies. While the total annual costs for the fully fledged system amount to 38.5 k USD, the omission of biogas leads to a cost increase by 29%, while the omission of biogas and photovoltaics leads to an increase by 74% to 66.8 k USD. Hence, a system in which electricity is exclusively generated from diesel is not even net-profitable in a fully socially financed scenario and thus cannot sustainably provide the domestic community with energy and water free of charge. In order to cover the net losses, 46.4 USD per capita and year or 0.34 USD/kWh are charged for electricity. As the WACC increases to 15%, only the fully fledged EWF system operates at full food production, while the omission of biogas reduces the agricultural productivity by 16% and the absence of both renewable energy sources reduces the productivity by 68% to 70 tons per year, which is just sufficient to feed the domestic community. While the fully fledged EWF system breaks even, the unavailability of biogas prevents the systems from being profitable. Net losses for the DG + PV EWF system of 15.4 k USD and 17.3 k USD for the pure DG EWF system imply annual electricity and water expenses of 50 USD and 56.3 USD per capita, respectively; allocated to power consumption, this equals 0.36 USD/kWh and 0.41 USD/kWh, respectively.

Figure 12.

Costs and revenues variation in power generation technology choice for WACC = 0, 15, and 30%.

In the WACC 30% scenario, none of the EWF systems utilizes the maximum field capacity. While the fully fledged system still produces enough maize grain to provide for the domestic community (104 tons), the DG + PV EWF system and the pure DG EWF system produce just 13 tons and 8 tons, respectively. As the trend of declining profitability with an increase in WACC continues to proceed, even the fully fledged EWF system generates an annual net loss of 10.4 k USD, while the DG + PV EWF system loses 18.7 k USD and the pure DG EWF system 18.9 k USD. On a per capita level, this means that total annual costs for energy and water for a domestic inhabitant amounts to 33.8 USD (DG + PV + BG), 60.6 USD (DG + PV), and 61.4 USD (DG). In terms of consumed electricity, this implies a price of 0.25 USD/kWh for the fully fledged EWF system, 0.44 USD/kWh for the DG + PV EWF system, and 0.45 USD/kWh for the pure DG EWF system.

Out of this analysis, it is clear that a purely diesel-based EWF system is not sufficiently economical to provide the domestic community with free electricity and water on a sustainable basis, regardless of the cost of capital. The extension of this system by photovoltaics is only the first step towards a superior economic solution in which biogas generators are included as well. Especially for higher cost of capital, the positive financial impact of photovoltaics decreases as investor returns increase and the area of application decreases as agricultural activities decline. Regardless of the WACC, from a financial standpoint, the deployment of biogas systems is indispensable.

5. Conclusions and outlook

This contribution presents an economic analysis of decentralized energy-water-food systems and their capability to provide economic-feasible solutions for rural electrification and thus the potential to enable economic development of the rural population in sub-Saharan Africa. Their decentralized design avoids the financial and governmental obstacles coming with electrification through grid extension. Biogas motors as controllable power generators substitute the costly and environmental unfriendly use of diesel generators. Although the deployment of water pumps increases the system investment costs, they lead to two major advantages compared to micro-grids without their utilization. Firstly, they are flexible loads opposite to most private power consumers (e.g., light bulbs). The water pumps are powered by cheap solar power during daytime with little or even without use of costly battery storage. Secondly, water pumps are productive power consumers opposite to private consumption, because their utilization enables year-round agriculture, which increases local productivity. Hence the local population is enabled to pay back the investment costs despite their formerly low purchase power. The least-cost modeling on the case study of the rural community Kpori, a 300-inhabitant farming village in northern Ghana, confirmed this hypothesis. The system integration of biogas generators and water pumps to closed-loop energy-water-food systems reduces the costs significantly compared to current electrification approaches with diesel generators only or diesel generators combined with solar photovoltaics and batteries. The decreased demand of costly batteries and diesel and increased profits from year-round agriculture lead to annual costs of 2 USD for the for electricity and water supply of the community compared to 17,326 USD for power supply just with diesel, assuming WACC of 15% and that the profits from agricultural sales subsidize the power supply. The cost analysis of these modeling results shows that 37% of the costs are spent for farming salaries and just 9% on CAPEX but 21% on capital costs due to the WACC of 15%. The remaining costs result from costs for fuel and other operation costs such as maintenance. The conducted variation of WACC showed on the one hand that this has a strong impact on the LCOE, which are 0.08 USD/kWh for WACC of 0%, 0.22 USD/kWh for WACC of 15%, and 0.29 USD/kWh for WACC of 30%. On the other hand, increasing WACC leads to significant reduction of installed PV capacities and increased share of power from diesel generators. The utilization of biogas is almost independent of the WACC because of its low CAPEX and constrained maximum capacity due to shortage of livestock manure as input. Based on this model results, decentralized energy-water-food systems have shown their potential to enable LCOE below state-of-the-art off-grid systems and local job creation through improved agricultural productivity.

In order to prove the potential of decentralized energy-water-food systems, they must be implemented on-ground including research on the optimal management and ownership structures; professional requirements for its managers, technicians, and farmers; as well as possible investment strategies. Also, the least-cost model shall be improved regarding more detailed modeling of groundwater availability, nutrients in the soil, water consumption of different crops, and biogas digestion of various inputs. After adding these improvements of the model, it shall be disseminated to and used by interested NGOs and social enterprises. Thereby, decentralized energy-water-food systems could prove their potential to improve access to reliable energy, water, and food supply, to create local jobs, and thus to fight extreme poverty of the population in rural sub-Saharan Africa.

Load efficiency%28
Minimum load%25
Investment costsUSD/kW500
Fixed costsUSD/kW/year10
Variable costsUSD/kWh0.01

Table A1.

Techno-economic parameters for diesel generator.

Module typeCrystalline silicon
Tracking systemFixed
Investment costsUSD/kW1400
Fixed costsUSD/kW/year20
Variable costsUSD/kWh0

Table A2.

Techno-economic parameters for solar photovoltaics.

Depth of discharge60
Energy investment cost capacityUSD/kWh350
Power investment costsUSD/kW300
Energy fixed costsUSD/kWh/year10
Power fixed costsUSD/kW/year30
Variable costsUSD/kWh0
Round-trip efficiency%85

Table A3.

Techno-economic parameters for battery.

Load efficiency%29
Minimum load%40
Investment costsUSD/kW675
Fixed costsUSD/kW/year10
Variable costsUSD/kWh0.01

Table A4.

Techno-economic parameters for biogas generator.

Maximum installed capacityton/h0.0153
Investment costsUSD/ton/h788.4 k
Fixed costs%3.5% of investment costs
Variable costsUSD/ton2.1

Table A5.

Techno-economic parameters for biogas digester.

MaterialPlastic (PVC)
Investment costsUSD/m360
Fixed costsUSD/m3/year0

Table A6.

Techno-economic parameters for biogas tank.

Technology3-phase AC submersible pump
Total dynamic headm50
Rated volumem3/kWh4.4
Investment costsUSD/kW900
Fixed costsUSD/kW/year10% of investment costs
Variable costsUSD/kWh0.01

Table A7.

Techno-economic parameters for water pump.

Investment costsUSD/m335
Fixed costsUSD/m3/year1% of investment costs

Table A8.

Techno-economic parameters for water tank.

Arable landha15
Modeled cropMaize
Maize growth timeday125
Maize yieldton/ha6
Annual crop evapotranspirationmm/year1330.7
Crop residue to maize grain ratio1.69
Fertilizer costsUSD/ton400
Labor requirementday/ha144
Labor wageUSD/day3.08
Drip irrigation investment costsUSD/ha2000
Drip irrigation efficiency%90
Fixed costsUSD/ton/h/year2% of investment costs

Table A9.

Techno-economic parameters for maize field.

Investment costsUSD/m335
Fixed costsUSD/m3/year1% of investment costs

Table A10.

Techno-economic parameters for waste silo.

Diesel fuelUSD/kWh0.106
Maize grainUSD/ton200

Table A11.

Economic parameters of commodities bought from market.

Maize grainUSD/ton200

Table A12.

Economic parameters of commodities sold to market.

Output variable/technologyDGDG + PVDG + PV + BG (=EWFS)
Food production (ton/year)263263263
Total revenues (USD/year)56,56056,56056,560
Total costs (USD/year)66,84449,81338,508
Profit (USD/year)−14,284274714,052
Profit per HH (USD/year)39201
Cost per HH for E + W (USD/year)204
Electricity costs (USD/kWh)0.34
LCOE (USD/kWh)0.390.140.08
Unit costs of water (USD/m3)
Unit costs of food (USD/ton)189163132
Investment costs - Electricity (USD/year)64481983959
Investment costs - DG (USD/year)64410452
Investment costs - PV (USD/year)80952567
Investment costs - BG (USD/year)1341
Total installed power (kW)197152
Installed power - DG (kW)1932
Installed power - PV (kW)6839
Installed power - BG (kW)12
Total electricity generated (kWh)78,838101,19791,318
Electricity generation - DG (kWh)78,8381696853
Electricity generation - PV (kWh)99,50156,517
Electricity generation - BG (kWh)33,948

Table B1.

Model results for technology variation for WACC = 0%.

Output variable/technologyDGDG + PVDG + PV + BG (=EWFS)
Food production (ton/year)70222263
Total revenues (USD/year)14,04844,32452,560
Total costs (USD/year)31,37459,70852,562
Profit (USD/year)−17,326−15,385−2
Profit per HH (USD/year)
Cost per HH for E + W (USD/year)2842200
Electricity costs (USD/kWh)0.410.360.00
LCOE (USD/kWh)0.410.340.22
Unit costs of water (USD/m3)
Unit costs of food (USD/ton)193203164
Investment costs—Electricity (USD/year)129157228304
Investment costs—DG (USD/year)12911090408
Investment costs—PV (USD/year)46314549
Investment costs—BG (USD/year)3347
Total installed power (kW)153235
Installed power—DG (kW)15135
Installed power—PV (kW)1921
Installed power—BG (kW)9
Total electricity generated (kWh)50,34975,29081,967
Electricity generation—DG (kWh)50,34946,91617,583
Electricity generation—PV (kWh)28,37430,292
Electricity generation—BG (kWh)34,092

Table B2.

Model results for technology variation for WACC = 15%.

Output variable/technologyDGDG + PVDG + PV + BG (=EWFS)
Food production (ton/year)813104
Total revenues (USD/year)1695266420,868
Total costs (USD/year)206121,32131,291
Profit (USD/year)−18,919−18,657−10,423
Profit per HH (USD/year)
Cost per HH for E + W (USD/year)270267149
Electricity costs (USD/kWh)0.450.440.25
LCOE (USD/kWh)0.440.430.29
Unit costs of water (USD/m3)
Unit costs of food (USD/ton)208207179
Investment costs—Electricity (USD/year)216332288278
Investment costs—DG (USD/year)21632163974
Investment costs—PV (USD/year)10651394
Investment costs—BG (USD/year)5910
Total installed power (kW)141719
Installed power—DG (kW)14146
Installed power—PV (kW)33
Installed power—BG (kW)9
Total electricity generated (kWh)43,85344,32454,781
Electricity generation—DG (kWh)43,85340,61715,851
Electricity generation—PV (kWh)37074852
Electricity generation—BG (kWh)34,144

Table B3.

Model results for technology variation for WACC = 30%.


BGbiogas generator
DGdiesel generator
EWFSenergy-water-food system
E + Wenergy and water
LCOElevelized costs of electricity
OpExoperational expenses
PVsolar photovoltaics
SSAsub-Saharan Africa

© 2020 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution 3.0 License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to cite and reference

Link to this chapter Copy to clipboard

Cite this chapter Copy to clipboard

Johannes Winklmaier, Sissi Adeli Bazan Santos and Tobias Trenkle (January 11th 2020). Economic Development of Rural Communities in Sub-Saharan Africa through Decentralized Energy-Water-Food Systems, Regional Development in Africa, Norbert Edomah, IntechOpen, DOI: 10.5772/intechopen.90424. Available from:

chapter statistics

154total chapter downloads

More statistics for editors and authors

Login to your personal dashboard for more detailed statistics on your publications.

Access personal reporting

Related Content

This Book

Next chapter

World Trade Organization’s Trade Liberalization Policy on Agriculture and Food Security in West Africa

By Emeka C. Iloh, Michael Nwokedi, Chijioke Francis Onyebukwa and Queeneth Ekeocha

Related Book

First chapter

Introduction to Infrared Spectroscopy

By Theophile Theophanides

We are IntechOpen, the world's leading publisher of Open Access books. Built by scientists, for scientists. Our readership spans scientists, professors, researchers, librarians, and students, as well as business professionals. We share our knowledge and peer-reveiwed research papers with libraries, scientific and engineering societies, and also work with corporate R&D departments and government entities.

More About Us