Jiaxuan Chen

Harbin Institute of TechnologyChina

I works in the Center for Precision Engineering, Harbin Institute of Technology. My research interests include molecular dynamics, nanomachining, the subsurface deforming mechanism and mechanical properties of micro-nano structure, and the properties of nanostructure. SELECTED PUBLICATIONS 1. J.X. Chen. Y.C. Liang, X.L. Hu, Z.G. Wang, Q.L Wang, Atomic Simulation of Multi-tool Nanomachining Process, Current Nanoscience, 2012, 8(1): 84-88 ; 2. Y.C. Liang, J.X. Chen, M.J. Chen, Y.L. Tang and, Q.S. Bai, Integrated MD simulation of scratching and shearing of 3D nanostructure, computational materials science, 2008, 43: 1130-1140; 3. J.X. Chen, Y.C. Liang, Q.S. Bai, Y.L. Tang, M.J. Chen, Reseaching Nanometric Cutting of Copper Based On Molecular Dynamics, Journal of Computational and Theoretical Nanoscience, 2008, 5: 1485-1489; 4. Y.C. Liang, J.X. Chen, Q.S. Bai, D.P. Song and M.J. Chen, Three-dismensional molecular dynamics simulation of nanostructure for reciprocating nanomachining process, Journal of Vacuum Science and Technology B, 2009. 27(3): 1536-1542; 5. D.P. Song, M.J. Chen, Y.C. Liang, Q.S. Bai, J.X. Chen, X. F. Zheng. Adsorption of Tripeptide RGD on Rutile TiO2 Nanotopography Surface in Aqueous Solution. Acta Biomaterialia. 2010, 6(2): 684-694 ; 6. Y.C. Liang, J.X. Chen, M.J. Chen, Y.L. Tang and Q.S. Bai, Mechanical Properties of Machined Nanostructures, Chinese Journal of Chemical Physics, 2007, 20(6) : 649-654; 7. Y.C. Liang, K.Yang, Q.S. Bai, J.X. Chen, B. Wang, Modeling and experimental analysis of microburr formation considering tool edge radius and tool-tip breakage in microend milling, Journal of Vacuum Science and Technology B, 2009, 27(3): 1531-1535; 8. Y.C. Liang, J.X. Chen, Q.S. Bai, Y.L. Tang, M.J. Chen. Atomistic Simulation of Nanostructure for Machining-Tension Process, Acta Metallurgica Sinica, 2008, 44 (8): 119-124; 9. M.J. Chen, G.B. Xiao, J.X. Chen, C.Y. Wu, Research on the influence of machining introduced sub-surface defects and residue stress upon the mechanical properties of single crystal copper, Science China Technological Sciences, 2010, 53 (12): 3161-3167; 10. J.X. Chen, Y.C. Liang, M.J. Chen, Y.L. Tang and Q.S. Bai, A study of the subsurface damaged layers in nanoscratching process, International Journal of Abrasive Technology, 2009, 2(4): 368-381; PROFESSIONAL ACTIVITIES  2011.1__Engaged in the research on the effect of nanomachining process on the properties of nanostructure under media environment. This project is supported by National Natural Science Foundation of the P. R. China (NSFC). (Project Leader)  2007.1__Engaged in the research on micro-machining technology of micro-parts. This project is supported by National Natural Science Foundation of the P. R. China (NSFC). (Key Member)

1chapters authored