Chapters authored
Testing and Validating Instruments for Feedstocks of Mineral Carbonation
Different feedstocks Dunite, Olivine and Lizardite are examined in this research using various measuring techniques such as TGA-MS, XRD and Quantitative XRD and EDS. Quantitative XRD results matched with TGA-MS results. Malvern Mastersizer, EDS and QXRD results also showed a good match regarding the individuality of results which are shown graphically. TGA-MS calibration curves example is provided. Matching the results of different measuring techniques is a key to fundamental research. Comparison of the reactivity of dunite, soaked dunite, heat-activated dunite and lizardite and raw dunite soaked has been performed. TGA-MS and QXRD results match each other. Malvern Mastersizer, EDS and QXRD results match with their individual results indicating the instrument’s reliability. Semi-Quantitative XRD results authenticity is EXCELLENT. TGA-MS results match with QXRD is excellent. Mineral carbonation converts CO2 into stable mineral carbonates. This research explores the utilisation of serpentinised dunite (which is comprised of 61% lizardite) as a potential feedstock for mineral carbonation. Heat activation, ex-situ regrinding and concurrent grinding techniques were employed to enhance the reaction rate and yield, and to provide information on the carbonation reaction mechanism. Silica-rich layers that appeared during reference experiments were disrupted using concurrent grinding and significantly higher magnesite yields and Mg extractions were obtained.
Part of the book: Mineralogy