I am in the education profession for last 31 years, as a Professor of Structural Engineering, specializing, Biomechanics. I am teaching structural Mechanics, Design, Biomechanics. I have been a supervisor to many Postgraduate and Ph.D. students of engineering, orthodontists, architecture, for their research in Structural engineering, Biomechanics, Precast technology and Design.I have authored many research articles in international indexed journals and Books so far.
This chapter aims at establishing engineering material properties of bovine hard tissue cut out of long bone. The study and design of implants, medical devices, and their bone material necessitate the knowledge of mechanical properties of bone to be evaluated. Braces or steel plates are used as fixation devices in animals who are treated for the fracture to bone or cracked bone. Braces or steel plates are fixed to the bone by rods and screws. For checking the stability of these inserted metallic parts, they have to be compatible with bone. The metal and bone form composite action for the load transfer mechanism. To ensure proper biomechanics and design of these inserts and accessories, we need to know the elastic properties of bone. This chapter establishes the modulus of elasticity, poisons ratio of Bovine femur bone. The experimental study establishes the orthotropic behavior of Bovidae femur bone. This experimental research provides comprehensive mechanical properties of Bovidae femur bone, through series of mechanical tests. By performing compression tests on a bone specimen, stress, strain, elastic modulus, poison’s ratio, and yielding point of bone are established. The bovine long bone exhibits orthotropic or transversely isotropic nature of femur bone as expected. The data presented here is for samples derived from goat and water buffalo. The solid mechanics approach using stiffness matrix is adopted to establish elastic constants. The data of elastic constants, compliance, and stiffness coefficients obtained can be used for finite element analysis to simulate stability of composite, femur bone, and metallic fixation. The values of compression strength, Young’s modulus, Poisson’s ratio, and shear modulus are higher for water buffalo male than that of female showing gender difference. This may be attributed to lower bone density in females due to hormone secretion.
Part of the book: Bovine Science