Chapters authored
Why Al-B4C Metal Matrix Composites? A Review
The Al-B4C metal matrix composite (MMC) is characterized by its ability to absorb neutrons which makes it the most suitable shielding material for nuclear reactors. The present work was performed on two series of Al-B4C metal matrix composites made using a powder injection apparatus. In one series, commercially pure aluminum (A5) served as the matrix. For the second set, 6063 alloy was used. In all cases the volume fraction of B4C reinforcement particles (grit size 400 mesh, purity 99.5%) was approximately 15%. The volume fraction of the injected B4C particles was determined using a computer driven image analyzer. Measured amounts of Ti, Zr, and Ti + Zr, were added to the molten composites of both series. Microstructural characterization was carried out employing a field emission scanning electron microscope operating at 20 kV and equipped with an electron dispersive x-ray spectroscopic system (EDS). The same technique was applied to characterize the fracture behavior of the tested composites. Mechanical properties of these composites were investigated using impact testing, and ambient and high temperature tensile testing methods. Almost 1000 impact and tensile samples were tested following different heat treatments. The obtained results from these investigations are reported in this Chapter.
Part of the book: Advances in High-Entropy Alloys