Fuzzy logic is widely applied to daily life with various methods. One method is fuzzy multi-attribute decision making (FMADM). FMADM is able to select the best alternative from a number of alternatives. In FMADM there is a supporting method so that the results obtained are accurate and optimal, namely the classic MADM method. One method in classic MADM is the Simple Additive Weighting (SAW) method. The SAW method is precisely used to minimize diagnostic errors, but if a decision support system is made, the SAW method still requires a further development method, one of which is the FMADM method with its development. The purposes of this study are to describe the steps of SAW method and the development of FDM in theory, implement SAW method and the development of FDM to diagnose a type of disease and implement it in a decision support system using GUI matlab. The completion step of those two methods is through two stages, the first one will go through FMADM stage with SAW, which is weighted sum, then the output will be used as input to the FDM method based on total integral values. The result of this study is proven by patient experienced initial symptoms of high fever at a temperature of 39.5° C - 40° C, very much spots appear in rumple leed test (> 50 petheciae), bleeding gums, rarely got nausea and headache, as well as diarrhea. Accuracy for the decision support system using MAPE was obtained 93% so that the decision support system with FMADM method to diagnose the disease was feasible to use.
Part of the book: Fuzzy Systems