Chapters authored
Cryobiology and Cryopreservation of Sperm
Low temperature has been utilized to keep living cells and tissues dormant but potentially alive for cryopreservation and biobanking with great impacts on scientific and biomedical applications. However, there is a critical contradiction between the purpose of the cryopreservation and experimental findings: the cryopreserved cells and tissues can be fatally damaged by the cryopreservation process itself. Contrary to popular belief, the challenge to the life of living cells and tissues during the cryopreservation is not their ability to endure storage at cryogenic temperatures (below −190°C); rather it is the lethality associated with mass and energy transport within an intermediate zone of low temperature (−15 to −130°C) that a cell must traverse twice, once during cooling and once during warming. This chapter will focus on (1) the mechanisms of cryoinjury and cryopretection of human sperm in cryopreservation, and (2) cryopreservation techniques and methods developed based on the understanding of the above mechanisms.
Part of the book: Cryopreservation
Development of a Novel Electromagnetic Rewarming Technology for the Cryopreservation of Stem Cells with Large Volume
Applications of stem cells have been playing significant roles in scientific and clinical settings in the last few decades. The foundation of these approaches is successful cryopreservation of stem cells for future use. However, so far we can only cryopreserve stem cell suspension of small volumes in the order of 1 mL mostly due to the lack of an effective rewarming technique. Rapid and uniform rewarming has been approved to be beneficial, and sometimes, indispensable for the survival of cryopreserved stem cells, inhibiting ice recrystallization or devitrification. Unfortunately, the conventional water bath thawing method failed in providing the rapid and uniform rewarming. The conversion of electromagnetic (EM) energy into heat provides a possible solution to this problem. This chapter will focus on (1) analysis of the combined EM and heat transfer phenomenon in the rewarming of a biospecimen, (2) numerical investigation of the rewarming system, (3) practical setup of an EM resonance system, and (4) test of heating performance with large volume of cells.
Part of the book: Novel Perspectives of Stem Cell Manufacturing and Therapies