Biocomposites are materials formed by mixing a polymer matrix and a filler or reinforcement, with the characteristic that at least one should be of biological origin. For this study, biocomposites were obtained from natural fibers of cane bagasse and polypropylene, using bagasse from postindustrial sources, originating from the production of sugarcane from the Valle-Cauca region in Colombia. In addition, cane bagasse fibers were treated chemically, with the purpose of improving the interfacial relationship. Polypropylene homopolymer was used as a polymeric matrix, which was mixed in a twin screw extruder, obtaining different materials as biocomposites. Finally, it was possible to obtain a suitable biocomposite for application in injection molding processes and studying its mechanical, viscoelastic, and thermal behaviors, through DSC, TGA, DMA, and SEM techniques.
Part of the book: Characterizations of Some Composite Materials
In this work, biocomposites based on recycled polypropylene (r-PP) and two different natural fibers (coffee husk-CHF and coconut coir-CCF fibers) were prepared using extrusion and injection molding processes. Also, the addition of maleated polypropylene (MAPP) as a coupling agent on the biocomposites was explored. Recycled polypropylene and its biocomposites were tested following ASTM standards in order to evaluate tensile and flexural mechanical properties. Also, thermal behavior and the morphology of these materials have been studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electronic microscopy (SEM). The experimental results showed that the addition of CHF and CCF to the r-PP resulted in an increase in the flexural modulus and thermal properties of the composites but resulted in poor impact properties. Thermal characterization showed that CHF possesses a better thermal stability compared to CCF. However, both fibers act as nucleating agents and generate an increase in the thermal stability of the r-PP phase. Finally, it was observed that addition of 4% of MAPP significantly improved the mechanical strength and impact behavior of the biocomposites. Regarding environmental issues, a cradle to gate life cycle assessment was made in order to define the carbon footprint of the materials.
Part of the book: Thermosoftening Plastics