An increasingly serious and widespread problem is the introduction of plastics into the water cycle. The poor degradability leads to the plastic waste remaining in water for a long time and over time it fragments into smaller and smaller plastic particles. Both the visible plastic parts and in particular their decomposition products and functionalized plastic particles are an enormous burden. Seawater desalination and sea salt extraction are highly dependent on the quality of the seawater in terms of process utilization and cost structures, i.e., on the level of pollution. Especially microparticles represent a significant potential for blocking the microfiltration membranes (pore size > 100 nm) in the pretreatment and the very costly reverse osmosis (RO) membranes (pore size > 5 nm). An innovative approach for the removal of microplastics from industrially used seawater combines a chemically induced agglomeration and a new technological implementation step. The particular challenge in removing the synthetic impurities is not only their small size but also their inert properties against most of the physical and chemical additives for flocculation. With an easy implementation to existing systems, an economic aspect and a strong impact on the maritime ecological balance will be expected.
Part of the book: Plastics in the Environment