Confirmed terrestrial record cell and module efficiencies measured under the global AM 1.5 spectrum (1000 W/m2) at a cell temperature of 25°C (IEC 60904-3: 2008, ASTM G-173-03 global) [13].
\r\n\t
",isbn:"978-1-80356-336-7",printIsbn:"978-1-80356-335-0",pdfIsbn:"978-1-80356-337-4",doi:null,price:0,priceEur:0,priceUsd:0,slug:null,numberOfPages:0,isOpenForSubmission:!0,isSalesforceBook:!1,hash:"c13b60a29b20349f816a6ab71ba35e42",bookSignature:"Prof. Mingzhou Yu",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/11497.jpg",keywords:"Lab-on-a-Chip, Microfluidics and Nanofluidic Platforms, Micro and Nanoscale Phenomena, Mass and Heat Transport, Multiphase Flow, Nanoparticle-Laden Flows, New Unit-Operation, Theoretical Model, Numerical Method, Experiment, Application, Engineering",numberOfDownloads:null,numberOfWosCitations:0,numberOfCrossrefCitations:null,numberOfDimensionsCitations:null,numberOfTotalCitations:null,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"February 17th 2022",dateEndSecondStepPublish:"April 21st 2022",dateEndThirdStepPublish:"June 20th 2022",dateEndFourthStepPublish:"September 8th 2022",dateEndFifthStepPublish:"November 7th 2022",remainingDaysToSecondStep:"a month",secondStepPassed:!0,currentStepOfPublishingProcess:3,editedByType:null,kuFlag:!1,biosketch:"A pioneering researcher selected for the Alexander von Humboldt research fellowship and previously affiliated with the Karlsruhe Institute of Technology as a postdoc researcher. Dr. Yu is a holder of 90 journal papers, with an h index of 21, is a member of A& WA (USA) and AAAR (USA), and is the holder of 24 registered patents.",coeditorOneBiosketch:null,coeditorTwoBiosketch:null,coeditorThreeBiosketch:null,coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:[{id:"188972",title:"Prof.",name:"Mingzhou",middleName:null,surname:"Yu",slug:"mingzhou-yu",fullName:"Mingzhou Yu",profilePictureURL:"https://mts.intechopen.com/storage/users/188972/images/system/188972.jpg",biography:"Mingzhou Yu is now a Professor at China Jiliang University and a Guest Professor at Key Laboratory of Aerosol Chemistry and Physics, Chinese Academy of Science. He received his PhD degree from Zhejiang University in 2008 with the major fluid mechanism. During the time period between 2009 and 2012, he moved to Karlsruhe Institute of Technology, Germany, as a Alexander von Humboldt researcher where he worked with Prof. Gerhard Kasper and Dr. Martin Seipenbusch. Since 2013, he joined Prof. Junji Cao's research group as a guest Professor at Key Laboratory of Aerosol Chemistry and Physics, Chinese Academy of Science. During the time period between 2013 and 2016, he worked in The Hongkong Polytechnic University and Universidad Autónoma de Madrid, Spain, as a research associate or postdoc researcher. He is now leading a Aerosol Science and Technology Laboratory supported by Zhejiang Special Provincial Support in CJLU. He has published more than 90 cited articles and five books (or chapters).",institutionString:"China Jiliang University",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"1",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"China Jiliang University",institutionURL:null,country:{name:"China"}}}],coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"20",title:"Physics",slug:"physics"}],chapters:null,productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"418965",firstName:"Nera",lastName:"Butigan",middleName:null,title:"Ms.",imageUrl:"https://mts.intechopen.com/storage/users/418965/images/16899_n.jpg",email:"nera@intechopen.com",biography:"As an Author Service Manager, my responsibilities include monitoring and facilitating all publishing activities for authors and editors.\nFrom chapter submission and review to approval and revision, copyediting and design, until final publication, I work closely with authors and editors to ensure a simple and easy publishing process. I maintain constant and effective communication with authors, editors, and reviewers, which allows for a level of personal support that enables contributors to fully commit and concentrate on the chapters they are writing, editing or reviewing.\nI assist authors in preparing their full chapter submissions and track important deadlines to ensure they are met. I help to coordinate internal processes such as linguistic review and monitor the technical aspects of the process. As an ASM I am also involved in the acquisition of editors. Whether that be identifying an exceptional author and proposing an editorship collaboration, or contacting researchers who would like the opportunity to work with IntechOpen, I establish and help manage author and editor acquisition and contact."}},relatedBooks:[{type:"book",id:"8356",title:"Metastable, Spintronics Materials and Mechanics of Deformable Bodies",subtitle:"Recent Progress",isOpenForSubmission:!1,hash:"1550f1986ce9bcc0db87d407a8b47078",slug:"solid-state-physics-metastable-spintronics-materials-and-mechanics-of-deformable-bodies-recent-progress",bookSignature:"Subbarayan Sivasankaran, Pramoda Kumar Nayak and Ezgi Günay",coverURL:"https://cdn.intechopen.com/books/images_new/8356.jpg",editedByType:"Edited by",editors:[{id:"190989",title:"Dr.",name:"Subbarayan",surname:"Sivasankaran",slug:"subbarayan-sivasankaran",fullName:"Subbarayan Sivasankaran"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophile",surname:"Theophanides",slug:"theophile-theophanides",fullName:"Theophile Theophanides"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"314",title:"Regenerative Medicine and Tissue Engineering",subtitle:"Cells and Biomaterials",isOpenForSubmission:!1,hash:"bb67e80e480c86bb8315458012d65686",slug:"regenerative-medicine-and-tissue-engineering-cells-and-biomaterials",bookSignature:"Daniel Eberli",coverURL:"https://cdn.intechopen.com/books/images_new/314.jpg",editedByType:"Edited by",editors:[{id:"6495",title:"Dr.",name:"Daniel",surname:"Eberli",slug:"daniel-eberli",fullName:"Daniel Eberli"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"2270",title:"Fourier Transform",subtitle:"Materials Analysis",isOpenForSubmission:!1,hash:"5e094b066da527193e878e160b4772af",slug:"fourier-transform-materials-analysis",bookSignature:"Salih Mohammed Salih",coverURL:"https://cdn.intechopen.com/books/images_new/2270.jpg",editedByType:"Edited by",editors:[{id:"111691",title:"Dr.Ing.",name:"Salih",surname:"Salih",slug:"salih-salih",fullName:"Salih Salih"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"68288",title:"Toxic Materials Used in Thin Film Photovoltaics and Their Impacts on Environment",doi:"10.5772/intechopen.88326",slug:"toxic-materials-used-in-thin-film-photovoltaics-and-their-impacts-on-environment",body:'\nThe sun undoubtedly is known to be an incredible and inexhaustible source of energy, allowing the generation of electricity and showing distinct environmental advantages over conventional source. Once took out from the manufactory, photovoltaic (PV) systems do not produce any toxic gas emissions, any noise or greenhouse gases. However, as with any industrial product, there are health and environmental impacts associated with the manufacture of solar cells and solar panels. The PV industry uses harmful and flammable substances, although in small amounts, which can involve environmental and occupational risks. The main environmental impacts of solar panels are associated with the use of land, water, natural resources, hazardous materials, life-cycle global warming emissions etc.
\nThe solar cell manufacturing process involves a number of harmful chemicals. These substances, similar to those used in the general semiconductor industry, include sulfuric acid, hydrogen fluoride, hydrochloric acid, nitric acid, 1,1,1-trichloroethane, and acetone. The amount and type of chemicals used depends on the type of cell and the technology used [1]. Thin film PV (TFPV) technology contains a higher number of toxic materials than those used in traditional silicon PV technology, including indium, gallium, arsenic, selenium, cadmium, telluride [2]. These materials must be handled and disposed of properly, to avoid with time serious environmental and human health problems.
\nThe current idea of the industry is to ensure that these highly valuable and often rare materials are recycled, to foresee the pollution hazards. This chapter deals with the possibility of chemicals used in PV cell manufacturing process to be released to air, water surface and the environment. An overview on the TFPV industry will be done to understand how TFPV cells and modules are designed and fabricated. Some hazardous materials and chemicals used in the manufacture of TFPV technology and their relative toxicity to human health and environment will be produced. Finally, some solutions to anticipate long term harmful impacts of these products will be proposed.
\nThe ultimate goal in the manufacturing of a PV module is widely determined by the cost per unit power output. The development of new PV technologies based on thin film materials has been led by the need for cheaper and more efficient semiconductor materials. Thin film solar cells (TFSCs) have the potential for rapid growth and low cost production. They have several advantages in manufacturing processes compared to conventional silicon solar cells such as [3]:
Cheaper to produce
Lower consumption of materials
Fewer processing steps
Availability of materials
Simplified materials handling
Can be deposited on many different substrates
A variety of deposition technique
Process lends itself to automation
Integrated, monolithic circuit design instead of assembly of individual solar cells into final products
TFSCs are typically made up of thin layers of semiconductor materials, for instance cadmium or zinc sulfide, glass, and a contact material. The materials used in the design of TFSCs include polycrystalline silicon, amorphous silicon (a-Si), and semiconductors compounds. Semiconductors compounds include cadmium sulfide (CdS), cadmium telluride (CdTe), copper sulfide (CuS2), copper indium diselenide (CIS), copper indium gallium diselenide (CIGS), copper gallium diselenide (CGS), germanium (Ge), and gallium arsenide (GaAs) [4]. Other semiconductors compounds like copper zinc tin sulfide (CZTS), copper zinc tin selenide (CZTSe) and copper iron tin sulfide (CFTS) have proved over recent years their potential to convert the solar radiation into electricity and are being developing in laboratories. In these solar cells, the n material can be made of CdS or ZnS, while the p material can be made of CuInSe2 (CIS) or Cu2ZnSnS4 (CZTS). Gallium arsenide (GaAs) solar cells can use aluminum, indium, or phosphorous as p or n-type materials. In Figure 1, are shown typical traditional structures of a-Si, CdTe and CIGS thin film solar cells.
\nExamples of thin-film solar cells structures: (a) amorphous silicon, (b) cadmium telluride, and (c) copper indium gallium diselenide [
To achieve better conversion efficiency, the active layer of the cell should have its band gap energy within the optimum range of 1.1–1.8 eV [5, 6]. Amorphous silicon is just at the rear end of the optimum band gap range at 1.8 eV [6]. Ge (0.66 eV) and CdS (2.45 eV) for example, have band gap energies outside of the optimum range, which means that those materials show limited conversion efficiencies. Ge is usually used to improve conversion efficiency of amorphous silicon cells [7], whereas, CdS is used to improve conversion efficiency in CIS and CdTe cells [8]. In general, on the basis of the band gap, materials used in TFSCs such as GaAs and CdTe have higher theoretical conversion efficiency than crystalline silicon, as they show band gap energies close to the optimum value of approximately 1.5 eV [8].
\nThin film materials have higher light absorption capabilities than crystalline silicon as they have a direct absorption profile. Therefore, they can be shaped thinner than conventional silicon which must cut on wafers. For example, 1 μm of a GaAs direct semiconductor is sufficient to absorb the same quantity of the photons light than 100 μm of an indirect silicon semiconductor. CIS or CIGS are direct band gap polycrystalline materials with high absorption coefficients in the order of 105 cm−1, allowing the active layer only to be about 2 μm [9]. Some CIGS-based solar cells usually introduce a thin film of CdS on the top of the CIGS layer as a buffer layer, in order to ensure the electrical transition between the CIGS layer and the window layer (the front of the cell). Zinc, molybdenum, tin, and aluminum are used in these cells as front and back contacts or components of the layers.
\nThe efficiency of the energy conversion process is determined by the materials parameters and technical design of the solar cell. Theoretical research on TFSCs indicates that, devices could achieve conversion efficiencies up to 25% under lab conditions [10]. In addition, efficiencies of cells can substantially increase by stacking interconnected cells, which could achieve up to 41.9% for tandem (two cells) and 50% for multi cells [11]. Concentrator systems and devices used to track the sun can be another way to improve efficiency of PV systems. For example, the use of terrestrial concentrator GaAs/Ge solar cells achieved conversion efficiency up to 36.9% [12]. The first TFSCs had conversion efficiencies of 8–12% [4]. Table 1 presents the record lab efficiencies for cells and modules of different technology. Note that these are just record lab efficiencies, not commercially guaranteed efficiencies.
\nTechnology | \nCell efficiency (%) | \nModule efficiency (%) | \nDescription cell/module | \n
---|---|---|---|
Crystalline silicon | \n26.7 ± 0.5 | \n24.4 ± 0.5 | \nKaneka [14]/Kaneka (108 cells) [14] | \n
Multi crystalline silicon | \n22.3 ± 0.4 | \n19.9 ± 0.4 | \nFhG-ISE [15]/Trina solar (120 cells) [16] | \n
CIGS | \n21.7 ± 0.5 | \n19.2 ± 0.5 | \nSolar Frontier [17]/Solar Frontier (70 cells) [18] | \n
CdTe | \n21.0 ± 0.4 | \n18.6 ± 0.5 | \nFirst Solar [19]/First Solar [20] | \n
Thin film silicon | \n10.5 ± 0.3 | \n– | \nCSG solar [21]/ | \n
Amorphous silicon | \n10.2 ± 0.3 | \n9.1 | \nAIST [22] | \n
GaAs | \n28.8 ± 0.9 | \n25.1 ± 0.8 | \nAlta devices [23]/Alta devices [24] | \n
CZTS | \n10.0 ± 0.2 | \n– | \nUNSW [25] | \n
Confirmed terrestrial record cell and module efficiencies measured under the global AM 1.5 spectrum (1000 W/m2) at a cell temperature of 25°C (IEC 60904-3: 2008, ASTM G-173-03 global) [13].
Crystalline silicon-based technologies continue to dominate the world market share with about 95% of the total production in 2017 [26]. The share of multi crystalline technology is now about 62% of total production [26]. In 2017, the market share of all thin film technologies counted for about 5% [26]. Amorphous silicon holds 4% of this part followed by cadmium telluride with 1%. The others, especially CIGS and thin film silicon, although already available at the commercial stage still represent a negligible part of the market.
\nThin film materials such GaAs, GaInP2, and CIGS have been investigated for the development of concentrator cells. Concentrator cells have been designed to increase the intensity of the solar radiation on PV cells through the use of optical lenses. They consist of optical lenses, a cell assembly, a housing element, a secondary concentrator to reflect off-center light rays onto the cell, a mechanism to dissipate excess heat produced by concentrated sunlight, and various adhesives and contacts [27]. The main advantages of concentrator cells are: they reduce the number or size of solar cells used, enhance the power output, and enhance the solar cell efficiency under concentrated sunlight [8]. A conversion efficiency of 32% has been reported for concentrator cells [28]. This other way to increase the cells efficiency nevertheless presents some drawbacks: they involve expensive tracking systems and more precise controls than the traditional flat plate systems, they generate higher operating temperatures, which can decrease the long-term stability and lifetime of the PV cells. Concentrator cells were first designed for space applications, but modules for terrestrial applications are already commercially available [8].
\nIt is known that the complexity of solar cells and modules manufacturing strongly raises their costs. Conventional silicon is handled in different many ways, complicating therefore fabrication processes. First, silicon raw material is melted at very high temperatures and grown into a silicon ingot. Then, the ingot is molded and sawn into individual wafers for cell processing [3]. After testing, individual cells are connected together in a suitable electrical configuration. Finally, the connection circuit is hermetically packaged in a weatherproof flat container, typically with an aluminum frame. Figure 2 shows the flowchart describing the complete process to manufacture a conventional crystalline silicon-based module. The process requires more than 20 separate steps before a module is complete.
\nDifferent process steps for fabrication of crystalline silicon modules [
In contrast to crystalline silicon, thin film manufacturing steps are very simple. For example, the connection of the circuit from individual cells is removed. Instead of processing and handling ingots, wafers and cells, the final circuit is directly fabricated on a single large substrate, usually glass [3]. Thin film circuits require the deposition of three main layers namely a back contact or a base electrode layer usually deposited on glass, a semiconductor layer and a transparent window layer also acting like a conductor front contact as it is typically seen in Figure 1(c). The semiconductor layer is divided into the absorber and buffer layers. The stack of the absorber layer in one side and the buffer and window layers in another side creates an efficient n-p PV heterojunction. In TFSCs, the crucial phenomena of charge carriers generation and separation occur within the absorber; this layer therefore plays an important role in defining the electrical output parameters of the solar cell and usually confers its name to the technology. We have for instance CdTe for cadmium telluride based PV technology, CIGS for a range of chalcopyrite based PV technology and CZTS for a range of kesterite-based PV technology [3, 29].
\nAn important advantage of thin film PV module manufacturing is found in the monolithic series interconnection of individual cells. Thin film cells are interconnected through simple patterning steps integrated into the processing line. The patterning steps achieve the integrated series interconnection from cell to cell on the circuit as shown in Figure 3. Three scribes between deposition steps complete the cell definition, separation and interconnection. A transparent conductive oxide (TCO) can also be integrated to the system for photon absorption optimization [29].
\nDifferent process steps for fabrication of thin film modules [
To produce thin film PV devices, a variety of chemicals and materials is used. The types and quantities of chemicals used will depend on the type of the technology and the type of cell being produced. One can found also some variability in the use of chemicals for producing the same type of PV solar cells by different PV manufacturers. This means that each manufacturer has its own recipe to produce a type of solar cell. Table 2 gives a general list, but non-exhaustive of chemicals and materials used in the manufacturing of some TFSCs and modules.
\nCIS | \nCIGS | \nCZTS | \nGaAs | \nCdTe | \nCu2S | \na-Si | \n
---|---|---|---|---|---|---|
Cadmium | \nCadmium | \nCadmium | \nArsenic | \nCadmium chloride | \nAmmonium chloride | \nAcetone | \n
Copper | \nCopper | \nCopper | \nArsine | \nCadmium | \nAmmonium fluoroborate | \nAluminum | \n
Hydride gas | \nGallium | \nHydrogen selenide | \nGallium | \nMolybdenum | \nCadmium sulfide | \nChloro-silanes | \n
Hydrogen sulfide | \nIndium | \nHydrogen sulfide | \nHydrochloric acid | \nNickel | \nChromate coating | \nDiborane | \n
Hydrogen selenide | \nMolybdenum | \nMolybdenum | \nMethane | \nSulfur | \nCopper | \nHydrochloric acid | \n
Indium | \nSelenium | \nSelenium | \nPhosphine | \nTellurium | \nCuprous chloride | \nHydrofluoric acid | \n
Molybdenum | \nZinc | \nThiourea | \nTrichloroethylene | \nThiourea | \nGold | \nHydrogen | \n
Selenium | \n\n | Tin | \nTriethyl gallium | \nTin | \nHydrochloric acid | \nIsopropanol | \n
Zinc | \n\n | Zinc | \nTrimethyl gallium | \n\n | Hydrogen sulfide | \nNitrogen | \n
\n | \n | \n | \n | \n | Methanol | \nPhosphine | \n
\n | \n | \n | \n | \n | Nickel | \nPhosphoric acid | \n
\n | \n | \n | \n | \n | Nitrogen | \nSilane | \n
\n | \n | \n | \n | \n | Polyvinyl butyral | \nSilicon tetrafluoride | \n
\n | \n | \n | \n | \n | Silicon monoxide | \nSilicon | \n
\n | \n | \n | \n | \n | Sodium chloride | \nSodium hydroxide | \n
\n | \n | \n | \n | \n | Tantalum pentoxide | \nTin | \n
\n | \n | \n | \n | \n | Zinc | \n\n |
\n | \n | \n | \n | \n | Zinc fluoroborate | \n\n |
Chemicals and materials involved in the manufacturing process of different thin film PV technology [8].
In TFPV technology, only few amounts of semiconductor materials are necessary to produce thin or ultra-thin layers of a solar cell. The amounts of chemicals and materials used in the manufacturing of TFPV devices vary depending on the type of cell being produced. For example, the quantity of cadmium in a CIS PV module is evaluated at 0.04 g/m2 and in a CdTe PV module at 5 g/m2 [30]. Research allowed reducing significantly the amount of cadmium in PV devices by using light-trapping methods [8]. These methods have led to reduce the thickness of CdTe layers from 2 to o.5 μm, corresponding to 5.5 and 0.55 g/m2 amount of cadmium, respectively [8]. A diversified number of acids and corrosive liquids are used sensibly in large quantities during the manufacturing processes. These chemicals, similar to those used in the general semiconductor industry, and including sulfuric acid, hydrochloric acid, hydrogen fluoride and nitric acid are primarily used for cleaning wafers in the case of crystalline silicon or for removing impurities from raw semiconductor materials. Solvents like acetone, ethanol and 1,1,1-trichloroethane are also used for cleaning in different steps of the fabrication processes.
\nMany hazardous materials as well as explosive and toxic gases are involved in the manufacturing processes of thin film PV cells and modules. Table 3 presents a general list of some materials and chemicals and their description, classified as hazardous by the Department of Transportation (DOT) in USA and used in the whole PV industry. But the amounts and recipes vary from one manufacturer to another. Moreover, it is possible that some of these chemicals may no longer be used for PV devices production as the fabrication processes are constantly changing and evolving [8].
\nMaterial | \nSource | \nDOT hazard classification | \nCritical effects | \n
---|---|---|---|
Arsenic | \nGaAs | \nPoison | \nCancer, lung | \n
Arsine | \nGaAs (CVD) | \nHighly toxic gas | \nBlood, kidney | \n
Cadmium | \nCdTe, CdS, CdCl2 | \nPoison | \nCancer, kidney, bone | \n
Diborane | \na-Si dopant | \nFlammable gas | \nPulmonary | \n
Diethyl silane | \na-Si deposition | \nFlammable liquid | \n\n |
Diethyl zinc | \n\n | Pyrophoric liquid | \n\n |
Dimethyl zinc | \n\n | Spontaneously combustible | \n\n |
Hydrochloric acid | \na-Si, GaAs, Cu2S/CdS | \nCorrosive material | \n\n |
Hydrofluoric acid | \na-Si | \nCorrosive material | \n\n |
Hydrogen | \na-Si | \nFlammable gas | \nFire hazard | \n
Hydrogen selenide | \nCIS | \nHighly toxic gas | \nIrritant | \n
Hydrogen sulfide | \nCIS, Cu2S/CdS | \nFlammable gas | \nIrritant, Fire hazard | \n
Indium | \nCIS, CIGS | \nNot regulated | \nPulmonary, bone | \n
Methane | \nGaAs | \nFlammable gas | \nFire hazard | \n
Molybdenum hexafluoride | \n\n | Toxic and corrosive gas | \n\n |
Oxygen | \nx-Si | \nGaseous oxidizer | \n\n |
Phosphine | \na-Si dopant | \nHighly toxic and pyrophoric gas | \nIrritant, fire hazard | \n
Phosphorus oxychloride | \nx-Si | \nCorrosive material | \nIrritant, kidney | \n
Selenium | \nCIS, CZTS | \nPoison | \nIrritant | \n
Silane | \na-Si deposition | \nPyrophoric gas | \nIrritant, fire, explosion hazard | \n
Silicon tetrafluoride | \na-Si deposition | \nToxic and corrosive gas | \n\n |
Tellurium | \nCdTe | \nNot regulated | \nCyanosis, liver | \n
Tertiarybutyl arsine | \n\n | Pyrophoric and highly toxic liquid | \n\n |
Tertiarybutyl phosphine | \n\n | Pyrophoric liquid | \n\n |
Trimethyl aluminum | \n\n | Pyrophoric liquid | \n\n |
Trimethyl gallium | \nGaAs | \nPyrophoric liquid | \n\n |
Tungsten hexafluoride | \n\n | Toxic and corrosive gas | \n\n |
The wastes generated by the semiconductors materials used in TFPV industry are in general non-negligible. Acids and solvents each represented about one-third of the total wastes by weight (about 7000 tons) [33]. About 35% of the semiconductor wastes were evacuated as diluted acid solutions to sewage treatment plants and 37% were sent to offsite treatment facilities. About 27% of the total wastes were released to the atmosphere. Only 0.8% of the total wastes were discharged directly to the surface water and 0.015% to the landfills [33].
\nThe manufacturing of PV devices includes some chemicals which can be toxic or harmful to the humankind. The potential for health concerns is not only depend on the material harmful characteristics, but also on certain conditions which must be taken into account. For example, in addition to harmful characteristics of the chemicals, their concentration must be high enough to constitute a real problem in a given environment: a human or an animal must be in the surroundings of where the device or compound is used; there must be a total exposition process from the compound to the environment. Most often, the primary persons exposed to the PV manufacturing residues are the plant workers. The easiest exposure route for workers is inhalation of vapors or dusts and also via direct contact if spills occur [8]. Another route for workers to be infected by chemicals resulting from manufacturing processes could be accidental ingestion. The ones outside a manufacturing environment could be infected by chemicals via inhalation from stack emissions, elusive air emissions or from accidental release after fire or explosion [8]. But the exposure of nearby residents or other workers would be less than the plan workers because the chemicals would be dispersed in the ambient air after their emission. There are possibilities for lands containing spent PV modules to pollute the environment. For example, at the surroundings of spent PV modules, groundwater seepage could reach a drinking water source or river; but in both cases, there would be dilution (not totally) of the waste before the water was used. In short, any vapor emissions or groundwater seepage would be diluted by the ambient air or by the water before reaching nearby residents.
\nIt is well known that the fabrication of PV cells and modules needs the use of more or less large quantities of solvents and acids for synthesis and cleaning, gases for depositing ultra-thin film of semiconductors materials and metals according to the type of PV cell or module being fabricated. Most of these chemicals are highly toxic and harmful for humans and environment. Here are discussed some health and environment issues caused by chemicals hazards related to materials’ toxicity, flammability, explosiveness, and carcinogen nature. Below is a summary of potential health and environmental issues concerning the manufacture and the use of some thin film technologies such as CdTe, a-Si and CI(G)S.
\nThe manufacturing of CdTe solar cells can cause occupational health risks associated with the toxicity of the main constitutive materials such as CdTe, CdS, and cadmium chloride (CdCl2). Since cadmium compounds are usually used in powder and in liquid form, the primary route of exposure in manufactory settings is inhalation of cadmium-containing vapors or dust or ingestion of spills if this occurs. Processes in which cadmium compounds are used or produced in the form of fine fumes or particles present more risks to health, because they promote the absorption of these fine particles by the lung and thus can cause lung cancer. A long-term exposure can also have harmful effects on bone and kidney [32]. In addition, the inhalation of cadmium-containing vapors or dusts can result in metal vapor fever, pneumonitis, pulmonary edema, and finally death [32]. Since cadmium is produced primarily as a by-product of zinc mining, the levels of Cd production is fixed by the levels of zinc production. Because Zn is produced in large amounts, considerable amounts of Cd are also generated as by-product, without taking into account the amount used or required in PV technology. If the amount of Cd generated as a by-product of zinc is not totally absorbed by the whole market, it is discharged to the environment as hazardous waste. Thus, encapsulating Cd in CdTe for PV modules fabrication could be a trusty way to preserve the environment of hazards that can cause free elemental Cd. CdTe is more stable and insoluble to water; as such, it may be less toxic or harmful than free elemental Cd.
\nCdTe and CdS thin films are solid and are packaged into thick layers of glass or a waterproof container. At ambient conditions, the vapor pressure of CdTe is zero. Therefore, it is impossible for any vapors or dust to be released when using CdTe PV modules. The only or the more plausible way for cadmium to be released and absorbed by residents is via consumed modules in residential fires. Even in this way, flame temperatures in residential fires typically 800–1000°C, are not sufficient to vaporize CdTe [34]. The melting point of CdTe is 1041°C, and evaporation starts at 1050°C. The melting point of CdS is 1750°C [34]. Previous studies showed that CdTe releases are not probable to happen during residential fires or accidental breaks [35, 36, 37]. The potential for CdTe emissions could occur only in the case of industrial fires or from incinerating spent PV modules. In the first case, the fire itself probably would cause much greater risk than any potential Cd emissions [38]. The second case can happen only if CdTe modules end in waste-incineration streams [32].
\nAmorphous silicon based solar cells are usually fabricated using the plasma enhanced chemical vapor deposition (PECVD) technique. Silane gas (SiH4), mainly used as precursor, is extremely pyrophoric and represents the main safety hazard of this technology. It can spontaneously ignite for lower concentrations ranging from 2 to 3%, depending on the carrier gas. Due to the high pyrophoric nature of silane and even for concentrations lower than 2% in the carrier gas, pyrophoric footprints can be found locally if mixtures are not complete. Mixtures could be metastable and ignited after a certain time, for silane concentrations greater than 4.5% [32].
\nAmorphous silicon solar cells contain a large concentration of hydrogen atoms about 10%, as they are crucial for the material electronic properties [3]. But, the technology usually refers to use the words “amorphous silicon” instead of “hydrogenated amorphous silicon (a-Si:H),” because “unhydrogenated amorphous silicon” is of no use in electronic devices [3]. Hydrogen used in amorphous silicon manufacturing is explosive and flammable [32]; therefore, it is necessary for PV manufacturers to use highly sophisticated gas handling systems to minimize and even avoid the risks of fire and explosions. One efficient way to overcome these hazards is to store silane and hydrogen gases in bulk from tube trailers to avoid changing gas cylinders. Others toxic gases such as arsine (AsH3), phosphine (PH3) and germane (GeH4), used as doping-gases in the amorphous silicon manufacturing cannot pose any serious hazards to the public health or the environment if they are used in very small amounts. However, leakage of these gases should be avoided because it could cause significant occupational risks.
\nCIGS thin films can either be deposited by the thermal co-evaporation of the constitutive elements, or by the fast deposition of metal precursor layers which then react in a subsequent processing step to form the final compound [3]. In CIGS TFSCs, a very thin film of cadmium sulfide (CdS) is deposited by chemical bath method and acting as a buffer layer. However, CIGS solar cells freed of toxic cadmium have already been successfully produced [39]. The toxicity of copper, indium, gallium, and selenium is considered benign. In addition, elemental selenium is capital in the human nutrition; daily absorptions of 500–860 μg of selenium are acceptable for long periods [40]. Although elemental selenium has only a moderated toxicity associated with it, hydrogen selenide (H2Se) used in the manufacture of CIGS TFSCs is highly toxic and is dangerous to life and health [32]. Hydrogen selenide acts like arsine gas on human body even though its vapor pressure is lower than that of arsine. Moreover, it can oxidize to the less toxic selenium on the mucous membranes of the breathing system. The manufacturing system should be enclosed under negative pressure, and should be exhausted through an essential control scrubber to prevent hazards from highly toxic H2Se gas. Associated hazardous chemicals can be minimized by using safer alternatives methods like flow restricting valves and other safety options presented in detail by Fthenakis [41]. Some studies have shown that CIS and CGS have mild systemic toxicity and have shown no effects on ovulation, reproduction, liver and kidney [8]. But CIS was found to be less toxic than CGS and CdTe [8].
\nThe releases of chemicals in form of vapors or spills from the PV industry constitute the real hazards to the public health and to the environment. A variety of treatment methods or ways have been developed to manage or to minimize wastes produced by PV industries. These methods include waste minimization and recycling of PV modules at the end of their life.
\nWaste minimization is usually employed in the semiconductor industry, and is also appropriate to the PV sector. It includes reuse of rinse water after treatment, shifting toward less toxic chemicals as possible, control of spills and leaks, reduction of vapor losses, and selection of process that use fewer hazardous chemicals [8]. Some of these methods are not broadly used in the semiconductor sector due to the requirement of highly purified materials. The main goal to reuse processed chemicals in the semiconductor sector is to limit amounts of some harmful solvents and acids. A lot of changes have been successfully made in the manufacturing processes such as using less toxic materials instead of hazardous and replacing acid bath processing by acid spray in cleanings [33]. Splitting of spent solvents by type like chlorinated and non-chlorinated solvents can help increasing the volume of solvents that can be easily recycled [8].
\nAnother way to minimize wastes generated during the fabrication of thin film solar cells and modules is reducing the amounts of toxic elements. For example, the possibility of reducing the quantity of toxic cadmium in the synthesis of CdS thin films, which plays the role of the buffer layer in CdTe and CIS solar cells has been investigated. It was found that by varying the solution concentration and temperature in the chemical bath deposition process for instance, the typical concentration of cadmium can be reduced up to 10 times [42]. These different ways to operate can help reducing substantially the amount of wastes generated during the PV manufacturing processes.
\nIt will be many years before most PV panels come to the end of their life (about 30 years), so it is needed to put in place some recycling schemes to prevent in time the harmful effects of spent panels on the environment. Some major PV manufacturers have experienced a promising approach called “cradle to cradle” [8]. The concept of this approach is to recycle the toxic materials of the process into new products, which are less or not at all toxic. This approach has enabled reducing the potential for release wastes into the environment, and enhancing the amount of new resources that must be obtained.
\nThere are different ways or models of recycling PV modules implemented by PV manufacturers. Deficient PV systems from manufacturing plants and spent PV modules are collected by manufacturers for being recycled. The first intent was to apply the electronics model of recycling, which involves an intermediate company that would gather the spent PV modules, dismount them, and deal the usable parts. Unfortunately, this model is less suitable to the PV sector, because usable materials are very thin, and therefore, the modules are difficult to dismantle. An efficient way for recycling PV modules is to use large metal smelters to melt scrap PV modules. For example, save cadmium from CIS modules would need the use of a copper and zinc smelter, whereas CdTe cannot be melted in a zinc smelter as cadmium is a by-product of zinc mining. A method of recycling CdTe modules and developed by Solar Cells Inc. involves dismantling of the module, followed by glass milling and separation of the metals following a combination of physical and chemical methods such as chemical dissolution, mechanical separation, precipitation, and electrodeposition [43]. By this way, about 80% of the original tellurium was saved. Another method for recycling CIS and CdTe modules, and developed by Drinkaard Metalox Inc. uses chemical stripping, electrodeposition, precipitation, and evaporation. About 95% of tellurium and 96% of the lead for cells connection were saved by combining these different methods. This method allows the potential reuse of the substrate, because the metal conducting layer remains connected to the glass substrate after the separation of the elements [44]. A method of recycling CIS and CdTe modules based on electrochemical reactions in a closed loop system has been experienced at the early of years 2000 By Menezes et al. [45]. This approach could also lead to improve efficiency in the original CIS solar cells.
\nIn addition to the environment safety, another major reason for developing relevant and cost-effective methods for recycling PV modules is the scarcity of some of the exotic elements used in PV industry. Reserves of some elements like germanium, indium and tellurium are low and continue to decrease with time [8]. Considering that the TFPV technology is still growing, it is needed to develop more feasible ways to recycle PV materials in order to preserve their reserves in the earth crust.
\nThis chapter has shown the potential of some materials and chemicals used in the manufacture of thin film PV solar cells and modules to be hazardous. These hazardous chemicals can pose serious health and environment concerns, if proper cautions are not taken. Hazards could arise first from the toxicity and explosiveness of specific gases, then could affect occupational health and, in some cases, public health through accidents or elusive air emissions. Accidental releases of toxic gases and vapors can be prevented by minimizing wastes produced during the processes through choosing safer technologies, processes and less toxic materials. Recycling is expected to be the preferred disposal option for spent PV modules in the future, in order to minimize the potential environmental impacts and recover source of metals. Research is ongoing to build feasible methods of recycling spent modules for environmental safety.
\nThe authors acknowledge ANSOLE (African Network for Solar Energy) for financial support.
\nThe authors declare that they have no conflict of interest.
\nHervé Joël Tchognia Nkuissi is still grateful to the ICTP (The Abdus Salam International Centre for Theoretical Physics) and ANSOLE (African Network for Solar Energy) for financial support within the framework of the Intra-African Exchange (INEX) program, which helped him to complete his PhD studies at Hassan II University of Casablanca in Morocco.
\nA global phenomenon that is currently not in dispute is rapid urbanization with estimates suggesting that by 2030, over 60 per cent of the global population will be living in cities, increasingly concentrated in Africa, Asia and Latin America [1]. This inevitably places social and economic strain on the existing urban infrastructure. These strains are placed on physical factors such as deteriorating conditions in the environment, transport efficiency, utilities such as water and energy, as well as economic factors such as unemployment. As a result of this, there is an emerging informal sector, which though unproductive and lacking employee protections, continues to be the place where bulging African youth population finds its livelihood [2].
Digital technologies and internet connectivity are playing a major role in making better cities that they are now considered as a panacea for solving Africa’s chronic unemployment [3] and other associated challenges. As a result of this thinking, and to address these and emerging challenges, the smart city concept offers unusual opportunities for diverse countries [4]. Intensified digitization is increasingly becoming integral part of everyday life, more data is being collected and as a result leading to the accumulation of large amounts of data which is in most cases used in several beneficial application domains. Effective analytics of these data and utilization of the same is a critical factor for success in emerging business and service domains, as well as the smart city domain [5].
The emerging digital phenomenon is disrupting and transforming the informal sector that what seemed impossible a few years back could be possible. Studies [6] from Nigeria, confirm that majority of the informal enterprises could be easily formalized. This chapter is guided by the question: Taking into consideration that connectivity is growing across the continent, could digitalization end the curse of informal enterprises in Africa? The chapter will seek to address the questions: Will the new business models address disrupt and destroy livelihoods?
We attempt to explain the emerging phenomenon of technology, new business models and disruption of informal enterprises through the theory of abundance. That what is happening with technology in SSA is an opportunity for different combinations of existing problems that can be solved with new entrepreneurial openings as countries gear up to develop smarter cities. The chapter therefore makes a number of contributions. First a research that is looking at how informal enterprises can be formalized (something that has troubled policymakers for ages). Second, is theorizing abundance. The basic premise is that the world is big out there with opportunities for everybody such that if you are willing to achieve your goals, simply learn and polish the discipline of your craft [7].
There is no standardized commonly accepted definition of or set of terminologies for a smart city [4, 8]. Numerous scholars have defined the smart city concept differently, but these conceptual definitions however converge around three broad dimensions namely technology, people and institutions [9]. The three however have a nuanced effect on smartness of the cities. To have an impact, the policy directions and goals of a smart city should be ambitious and transformational [5, 6, 7, 10, 11, 12, 13, 14, 15, 16]. The focus of the city is to achieve an enriched quality of life for its citizenry whilst deliver tangible benefits by prudently employing the city’s natural resources and technology. The chapter adopts the dimensions of a smart city as articulated by Deloitte [4] and is shown in Figure 1.
Dimensions of a Smart City. Source: Deloitte [
According to Deloitte [4], there are five layers that make up a smart city namely infrastructure, interconnected city systems, ecosystem, people and goals, aspirations and quality of life. In addition to this, according to UNDP [8], digital infrastructure is considered in the form of different supporting digital layers which create different opportunities, as follows:
Urban Utilization: The layer where physical and digital infrastructures meet. Examples include smart buildings, smart mobility, smart grids (for utilities such as water, electricity and gas) and smart waste management systems.
Sensor: This layer includes smart devices that measure and monitor different parameters of the city and its environment. This could include measurements in pollution in air or water.
Connectivity: This layer involves the transport of data and information from the sensor level to storage and to data aggregators for further analysis. This is supported by appropriate bandwidth and fiber networks.
Data analytics: This layer involves the analysis of data collected by different smart infrastructure systems, to help predict some events. This includes examples such as traffic congestion. It also includes digital health, whereby a programme determines on the basis of pre-determined symptoms on what the basic illness is likely to be and prescribes medicine.
Automation: The digital enabling interface layer that enables automation and scalability for a large number of devices across multiple domains and verticals.
Establishing a smart city is a continuously interactive process that entails a robust, reliable and affordable broadband network coupled with an efficient ecosystem for the internet of things (IoT) and the capacity to utilize the big data that will be generated. Governance and leadership support are very crucial also as they allow harnessing and tapping into the local innovation system [10]; Leadership can also support open data and open science models that would have less reliance on proprietary technology models and prop research collaborations and create further opportunities for innovation [17].
Disruption of business takes place when the traditional business models face a challenger who changes the game by offering greater value to the customer in a manner that existing firms are not able to match the offer or be able to compete. In other words, “detonation of the status quo” [11]. Technology has enabled unprecedented development of new business models that have brought greater value as well as increased productivity. For example, the entry of mobile money in Africa had changed business models, brought greater value and enhance efficiency.
Digital disruption in form of platforms has started changing the very nature of what it means to be informal or formal. Digital platforms enable firms with basic business services so that they can concentrate on their core competence. These basic services range from offer advice on how to set prices, customer service training, accounting, sales data, and even collection of sales taxes. Similarly, platforms can handle customer service, payments and returns.
Informal enterprises refer to micro or small firms in the informal economy (unregistered with government, are mostly unregulated, employees have no formal contract and no safety net and pay no taxes to authorities). The informal economy is by far the principle source of employment in Africa and accounts for more than 70 per cent of employment in Sub-Saharan Africa [2, 12]. A large informal economy makes it harder to measure the economic performance hence the reason why many governments want to formalize the sector. In the hope of achieving greater value and efficiency, informal enterprises have widely adopted technology. The informal economy is complex and to paraphrase Dungy and Ndofor (2019) [18], is the, “…the utopian and the dystopian, the connected and disjointed, structure and chaos, legitimate yet illegal, legal yet illegitimate all residing together in one big tent…”. Furthermore, informal work brings freedom, flexibility, precarity and vulnerability into the lives of African gig workers [3].
Globally, there has been an eightfold growth in the number of individuals using internet over a period of less than twenty years from 495 million to over 4 billion people [19, 20]. This portends well for additional value add products and positioning of technological growth in the continent. Sub-Saharan Africa (SSA) has not been left behind and has seen rapid growth in internet penetration and related technology investment. The International Telecommunications Union (ITU) estimates that sub-Saharan Africans’ individual internet usage increased from 2.7% in 2005 to 28.2% in 2019. The trends for the key ICT indicators are shown below in Figure 2.
Sub Saharan Africa key ICT indicator penetration rate (2013–2019). Source: ITU 2019 [
As observed from Figure 2, the penetration rate of all ICT indicators has seen positive growth. The increase in internet usage has been accompanied by increased investments in data storage, processing power and innovation ecosystems. In spite this, there are still further opportunities in terms of the population that is not digitized. This has resulted in many large multinational information technology firms viewing Africa as their next frontier of growth [4].
Since 2009, Sub-Saharan Africa (SSA) has witnessed massive investment in digital development and creating enabling conditions but there is still work to be done. With several (TEAMS, SEACOM, EASSy and LION) high-capacity undersea fiber optic connectivity into the continent and boosting capacity to more than 36 Terabits per second, SSA has made tremendous strides. Prior to 2009, the entire continent used a mere 1 Giga Byte per second from satellite. The challenge now lies with last mile coverage.
The last mile coverage especially in advanced systems like fourth generation (4G) network is a major strength of access to digital technologies. 4G network is an advanced network to replace 2G and 3G systems that were used for communication across the world. Its introduction was celebrated as important in SSA because many people first accessed the internet on their mobile phones. As such, 4G with its higher download speeds, sometimes as fast as high-speed fixed broadband, greatly improved user experience. Its introduction has helped to improve productivity. Investments in 4G have largely been in urban areas with much of the rural areas using the older generations. To unlock Africa’s digital potential to stimulate enterprise, each country must work toward improving access and affordability.
Affordable broadband improves access to digital technologies and facilitates economic growth. Recent research however, questions if the internet has any effect on economic development. A study by McKinsey Global Institute (2011, p.7) [13] noted that “much of the impact of the internet and the way that it contributes to growth and raising standards of living have gone unmeasured”. Follow up studies like Vanags and Grāvelis, 2015 [16], indicated that investment in broadband positively impacted on GDP gain as well as employment. The investment in 4G for example, was meant to improve broadband penetration but comparison between 4G coverage and broadband penetration revealed that without affordability, access alone had no impact. For example, 4G rollout in Rwanda is almost 100% compared to Kenya’s 53% but Rwanda’s broadband penetration (11.3%) is less than half of Kenya’s (47.8%). The difference is explained by affordability, access to devices and human development index.
Technology has created a range of new opportunities in the gig economy, a demand-driven independent, short-term or a task-by-task economic activities that payment is received upon the completion of the assignment. The opportunities are available to anyone in the world and provided for anyone who demands them [3]. The operating models of the online gig platforms can be divided into ‘on-demand’ work like ride hailing drivers like Uber taxis for instance and ‘crowd-work’ which includes for instance a Kenyan online gig worker, providing translation services for a client based anywhere in the world through Upwork. These platforms may also include homestay hosts like Airbnb, e-commerce logistics like LoriSytems, e-commerce sellers like Jumia, and business-to-business marketplace platform like Twiga Foods. These enterprises would not be possible without investment in ICT infrastructure.
Digital progression enables informal businesses to successfully make the progressive transition from start-up to formal enterprise making each step at less cost and lesser risk [2]. This is exhibited in Figure 3.
Digital vs. traditional formalization process. Source: Ng’weno and Porteous (2018) [
As observed in Figure 3, an informal economy gradually gets used to mobile money and other additional steps. Unlike the Digital business progression model, the ascent in the traditional business progression model is very steep. The use of mobile money has enabled improved financial inclusion in the informal economies [1]. Indeed, according to GSMA [19], Sub Saharan Africa leads in the uptake of mobile money across the globe. This is shown in Figure 4.
Evolution of the global Mobile money landscape, 2001–2019. Source: GSMA (2019) [
The growth of mobile money in Sub Saharan Africa has been phenomenal thereby creating massive opportunities for integration. In due course, the firms get absorbed into the formal economy, paying taxes as required amongst other formal activities. This creates massive opportunities for the formalization of the national economies. In Kenya for example, a study by Genesis Analytics Limited [21] suggested that the total size of the online Kenyan gig economy as at 2019 was $109 million and employed more than 36,000 workers and was projected to grow by over 33% over the next 5 years. Additionally, an estimated 4.8 million African workers reported having derived an income from online gig work in seven surveyed countries namely Ghana, Kenya, Nigeria, Rwanda, South Africa, Tanzania and Uganda [22]. These digital labour markets have a potential for future growth [1]. In addition to this, Smit, Johnson, Hunter, Dunn and van Vuuren (2019) [23] established that the growth of platform launches across Africa has been steady and this is shown in Figure 5.
Platform launches across eight African countries. Source: Smit et al. (2019) [
In spite all this, there have been challenges that are associated with working conditions in platforms and online gigs [2, 3, 21, 24]. These challenges range from low remuneration, social isolation as a result of having to work alone, working unsocial and irregular hours to meet strict deadlines, overwork, sleep deprivation and exhaustion as a result of the gig workers having to balance the gigs and their normal responsibilities [24].
Innovation hubs create various pan-sectoral initiatives that promote beneficial ecosystems where entrepreneurs and other stakeholders can collaborate and promote their ideas. To a large extent, these are mostly driven by technology. Hubs characteristically provide in-kind support that includes trainings, advice and facilities as well as financial support programmes. The number of identified tech-hubs in Africa, have seen a phenomenal growth from 314 in 2016 to 643 in 2019. This is represented by Figure 6.
Tech hubs in Africa, 2019. Source: Afrilabs and Briter Bridges (2019) [
According to the survey by Briter Bridges and Afrilabs, as shown in Figures 6, 41% of the tech-hub facilities are incubators, 24% are innovation hubs, 14% are accelerators and 39% offer coworking space [25].
The use of information and communication technologies (ICT) and geographic information systems (GIS) to map informal settlements, and by openly providing spatial maps, has led to improved conditions for the poor people living in slums. Furthermore, ICTs and GIS has forced policymakers to apply much-needed changes of urban renewal, by beginning to pay attention to the plight of the poor in slums to not only identify their slum assets but become but of the growing e-commerce that has brought greater inclusivity improving both livelihood and security. Whereas those living in slums have complex situations, increased transparency through open mapping has provided a platform for sustainable renewal and created new enterprises [15].
In this chapter, we study the impact of smart cities on the creation of new business models and informal enterprises in Sub-Saharan Africa (SSA). SSA provides the best environment to conduct such a study since digitisation is under way, the informal economy is large and the emerging technologies are enabling disruptive business models. Over a period of three years we developed an innovative, inductive method of identifying policymakers from some of the most progressive countries in information and Communications Technologies (ICTs) in the continent for qualitative interviews. We eventually interviewed 18 policymakers as respondents at conferences and more notably at the Transform Africa Summit, 2019 that was held in Kigali, Rwanda. These were qualitative interviews with the key respondents. In addition to this, secondary data, where appropriate was used in the analysis. The findings have been discussed based on the thematic dimensions identified by Deloitte [4].
Based on observations and interviews, we found many responses to be largely positive in terms of attitude toward technology and what it can do to facilitate economic development in the continent. Almost all the respondents used the term leapfrog at least five times through the interview. There is a can-do attitude even in countries that have not developed sufficient human resource capacity. It confirmed the abundance theory that is keeping policymakers hopeful that it will guide Africa’s competitiveness. Psychologists suggest that this theory explains a world in which any person “with the correct attitude, training, or spiritual alignment can acquire personal abundance which should lead to material abundance: wealth regardless of economic or social circumstances.”
All of the participants were aware that building of the ICT infrastructure to support smart cities is critical but expensive and as such they are creating new embracing new models of infrastructure development, To build especially the hard infrastructure such as building and space; transport and utilities network; information and communication network they need to leverage public private partnerships (PPPs). Indeed, virtually all of the countries that had started major infrastructure development of new smart cities, leveraged on PPPs. Infrastructure has always been a major problem in Africa but the continent has extensively dealt with it. The current state of infrastructural requirements especially the undersea cables is in place. However, only a handful of countries that have developed or are in the process of developing smart cities (see Table below) as infrastructural bases for smart development.
The African transport infrastructure performance quality which has over time dropped in quality can be replaced with smart urban transport systems that combine and integrate the use of big data, AI and other multiple technologies. Apart from this, other infrastructural requirements can also be applied in areas of energy production and distribution through smart grids. Smart public and private health management systems through AI, blockchain and big data analysis can also be developed and devise innovative and efficient ways for disaster management. The use of additive manufacturing brings affordability and efficiency in production. Subsequently, smart cities leverage on e-commerce platforms to formalize the commercial entities. and education.
Many of these new cities are envisaged to create thousands of new employment opportunities in the emerging technology sector in the continent. Some of the cities at the advanced stages of development are seen in Table 1.
Name | Location | Financing model |
---|---|---|
True Wakanda | Ethiopia | USD 3 billion project in partnership with private developer. |
Hope City | Ghana | $10 billion public private partnership |
Konza Silicon Savanah City | Kenya | $10 billion in public-private partnership, with national government providing 10% of the total funding (mainly in infrastructure). |
Ebène Cybercity | Mauritius | Loans guaranteed by the Indian government. |
Eko Atlantic | Nigeria | $6 billion public private partnership |
Kigali Innovation City | Rwanda | USD 2 billion project funded by the Rwandese Government and Africa50 |
Waterfalls | South Africa | $1.2billion Private sector funding expected to be completed in 2025. |
Financing model of African smart cities.
Source: Compiled by Authors from Secondary Data.
The soft requirements of infrastructure fall in the second category and include governance and leadership; community organizations and innovation forums. This can easily be the weakest link because technology is incessantly being developed and “…we love tech so much (that) it inhibits our ability to judge its pros and cons…” [26]. There is a need for public policy framework that enables the infrastructural base to provide an integrated support to the other dimensions of the smart city [27]. This will require leveraging on the regional pan-country like the Smart Africa Initiative [27] as well as other in country initiatives.
The fourth industrial revolution (4IR) describes the ongoing global conversion of labour-intensive processes to the use of information technology. It is not only ubiquitous but is also happening dramatically. Some of the pillars of 4IR include robotics, artificial intelligence (AI), internet of things (IoT), big data, customer service personalization, cloud computing, and other forms of digital innovation. The resulting shifts and disruptions imply that we live in a time of both great promise and great peril. As the 4IR technologies intensify, cities are becoming smarter, new business models are emerging and informal enterprises are continually under disruption. Experts have argued that 4IR has the potential to rejuvenate Africa’s economy, enhance its productivity and improve its global competitiveness [27]. As a result of this, emerging technologies support the development of smart cities. As shown in Figure 1, the dimensions of a smart city require an interactive process between people, ecosystems, interconnected systems, and responsive infrastructure.
African cities are uniquely advantaged to have a competitive edge for the future. Some of these advantages include limited legacy drawbacks; youthful consumer population; urbanization; entrepreneurial culture; connectivity; overarching government leadership strategically positioning ICT as an enabler [4]. Furthermore, the rise of the gig economy has created employment opportunities that has impacted upon poverty reduction in the emerging economies [1, 28] thereby improving on the quality of lives. With a population that has increasingly been well educated and exposed to different cultures and lifestyles, the goals, aspiration and quality of life for the urban individuals has improved over time.
Lifestyle is a key driver for smart cities. The broad areas of concern in the individual’s lifestyle include government efficiency, employment, transport, education, healthcare, energy, environment and public security and safety. As a result of the adapted lifestyle, individuals are ambitious to have freedom to choose without compromising on their feeling of independence. Furthermore, the same individuals are desirous of being in control and feeling safe and secure. To meet these objectives, the individuals need to have opportunities for creation of wealth and sustenance of their lifestyles.
The dimension of people relates to the nexus between the opportunity seekers who double up as the innovators, the residents who desire the quality of life, the employers who utilize the opportunities and visitors of the urban areas. A smart city makes use of the pragmatic ideas by creative people to provide smart scientific solutions that address the lifestyle concerns around the city. As a result of the solutions, the residents of the smart cities have access to a number of features that range from smart homes, smart buildings, smart offices and larger smart ensembles like airports, shopping malls hospitals or university campuses which are fitted with a multitude of mobile terminals and embedded devices as well as connected sensors that are monitored and programmed for certain decisions. In addition to these, there are a whole range of interconnected logistical support and services through various platforms that provide background support to the lifestyle solutions. These functionalities are enabled through technology by IoT and robotics.
Already employers are leveraging on a smart city infrastructure and have many routine tasks accomplished at decentralized locations. This sets a basis for online gig and platforms. A challenge that however that subsists is that whereas online platforms will not always have individual workers’ interest as their priority, there is increased agitation for increased regulation of this sector. Secondly, by its very definition, online gig tasks can be carried out in a borderless fashion with minimum regard for local regulation on working conditions.
Digital technologies have enabled inclusion, efficiency and innovation of opportunities. A smart ecosystem is a conceptual extension of smart space from the personal context to the larger community and the entire city. It straddles the public and private sector and the broader community. It encompasses policies, laws, regulations and processes that are weaved together to obtain a desired smart outcome. An enabling ecosystem is based on a skilled and equally aspirational citizenry as well as transformational leadership. To enable continuous innovation, smart cities proactively encourage innovation programmes that include labs, training, skills development and partnerships with different academic, vocational and research institutions. A Smart city ecosystem facilitates the integration of data and information. This is done by initiatives that support open data, analytical services as well as monetization framework. The ecosystem needs to encourage data sharing whilst protecting privacy and what and how data is generated. Herein lies the digital age paradox, where transnational firms have comprehensive information on individuals’ lives and can trade it in the global marketplace, whereas individual citizens struggle to get rudimentary information on growth in income and wealth at a macro level [1].
The world is more connected than ever [19, 20, 28]. Similarly, as shown in Figure 1, a smart city has interconnected systems that cover different facets of the city’s activities. Smart cities strive to make strategic choices that attain transformational leaps in the quality of life within its region of operation. There are many ways in which technology connectivity can be used in pursuit of urban management. For example, through the use of IoT, roads can be equipped with LED street lamps that sense pedestrian movement, and consequently dimming and brightening in accordance with the movement. These IoT enabled gadgets also sense and collect pollution data in the air, and send this information to a data base. Additionally, the IoT gadgets can detect humidity and weather conditions in an area and advised to the consumers of this information.
Furthermore, IoT can be used to analyze the traffic on roads and adjust parking metre fees accordingly. This feeds to an automated urban traffic management system. IoT can also identify weak infrastructure like potholes on roads thus helping authorities prioritize their budget for urgent repairs. Remotely monitored close circuit cameras, will take pictures of an accident scene and send it to some database, but machine learning and AI would be required to translate this data into actionable information that can trigger emergency services to save lives. Finally, the IoT enabled street lamps can also act as free WiFi routers to nearby citizens.
Such interconnected systems allow the smart cities to remove inefficiencies that come about as a result of manual monitoring and intervention. The role of human intervention would now be directed to higher skilled tasks. This calls for a re-think into our skills development in the continent by facilitating creation of mechanisms supporting school-to-work transition in each country by (i) developing content around career choices and investing in counselors to help students navigate the transition (ii) revamping TVET institutions to meet the new demand for jobs (iii) changing the negative perception of TVETs and (iv) collaborating with the private sector to provide internship to graduating students as part of the transition process.
Smart cities allow the leveraging of digital transformation in a shift to abandon traditional paradigms and create a novel globally entangled experience and lifestyle. As the cities become smart, formalization of the informal sector improves. New digital businesses are forcing the shift into formalization which benefits the economy by making it possible to measure the economy and better worker safety. Through the use of technology, and the democratization of information, smart cities enable transnational innovation processes that would be targeted at universal, grand challenges. Our contention is that the absence of legacy systems and the advent of affordable broadband has set SSA on a roller-coaster of change that may see the formalization of informal enterprises by new business models offering better value. The combination of informality, technology and disruptive business models brings a new territory of change and discovery [14]. However, not every country in SSA has had the chance of seeing change and discovery. Several other factors stand in the despite the fact that SSA has the necessary infrastructure to enable greater productivity through technology.
Not every African country that has embarked on making cities smart. As such each country needs some policy interventions starting from building a national vision that is dedicated to national level commitments to developing smart infrastructure. This also will spell out the commitment to funding through PPPs and collaborating with institutions of higher learning to do studies on the impact of the changes. Smart cities require an urgent development of localized relevant skilled capacity as they can easily result in gigs being performed from remote locations thereby not actually addressing the local issues of unemployment. For better outcome, it is imperative that governments embrace Research and Development as well as education. Hold regular hackathons on innovation and competition in order to build the future infrastructure to support the smart cities.
The authors declare no conflict of interest with respect to the research, authorship, and/or publication of this article.
Artificial Intelligence Fourth Industrial Revolution Information and Communication Technologies Internet of Things International Telecommunications Union Public Private Partnerships
The Internet has irrevocably changed the dynamics of scholarly communication and publishing. Consequently, we find it necessary to indicate, unambiguously, our definition of what we consider to be a published scientific work.
",metaTitle:"Prior Publication Policy",metaDescription:"Prior Publication Policy",metaKeywords:null,canonicalURL:"/page/prior-publication-policy",contentRaw:'[{"type":"htmlEditorComponent","content":"A significant number of working papers, early drafts, and similar work in progress are openly shared online between members of the scientific community. It has become common to announce one’s own research on a personal website or a blog to gather comments and suggestions from other researchers. Such works and online postings are, indeed, published in the sense that they are made publicly available. However, this does not mean that if submitted for publication by IntechOpen they are not original works. We differentiate between reviewed and non-reviewed works when determining whether a work is original and has been published in a scholarly sense or not.
\\n\\nThe significance of Peer Review cannot be overstated when it comes to defining, in our terms, what constitutes a published scientific work. Peer Review is widely considered to be the cornerstone of modern publishing processes and the key value-adding contribution to a scholarly manuscript that a publisher can make.
\\n\\nOther than the issue of originality, research misconduct is another major issue that all publishers have to address. IntechOpen’s Retraction & Correction Policy and various publication ethics guidelines identify both redundant publication and (self)plagiarism to fall within the definition of research misconduct, thus constituting grounds for rejection or the issue of a Retraction if the work has already been published.
\\n\\nIn order to facilitate the tracking of a manuscript’s publishing history and its development from its earliest draft to the manuscript submitted, we encourage Authors to disclose any instances of a manuscript’s prior publication, whether it be through a conference presentation, a newspaper article, a working paper publicly available in a repository or a blog post.
\\n\\nA note to the Academic Editor containing detailed information about a submitted manuscript’s previous public availability is the preferred means of reporting prior publication. This helps us determine if there are any earlier versions of a manuscript that should be disclosed to our readers or if any of those earlier versions should be cited and listed in a manuscript’s references.
\\n\\nSome basic information about the editorial treatment of different varieties of prior publication is laid out below:
\\n\\n1. CONFERENCE PAPERS & PRESENTATIONS
\\n\\nGiven that conference papers and presentations generally pass through some sort of peer or editorial review, we consider them to be published in the accepted scholarly sense, particularly if they are published as a part of conference proceedings.
\\n\\nAll submitted manuscripts originating from a previously published conference paper must contain at least 50% of new original content to be accepted for review and considered for publication.
\\n\\nAuthors are required to report any links their manuscript might have with their earlier conference papers and presentations in a note to the Academic Editor, as well as in the manuscript itself. Additionally, Authors should obtain any necessary permissions from the publisher of their conference paper if copyright transfer occurred during the publishing process. Failure to do so may prevent Us from publishing an otherwise worthy work.
\\n\\n2. NEWSPAPER & MAGAZINE ARTICLES
\\n\\nNewspaper and magazine articles usually do not pass through any extensive peer or editorial review and we do not consider them to be published in the scholarly sense. Articles appearing in newspapers and magazines rarely possess the depth and structure characteristic of scholarly articles.
\\n\\nSubmitted manuscripts stemming from a previous newspaper or magazine article will be accepted for review and considered for publication. However, Authors are strongly advised to report any such publication in an accompanying note to the External Editor.
\\n\\nAs with the conference papers and presentations, Authors should obtain any necessary permissions from the newspaper or magazine that published the work, and indicate that they have done so in a note to the External Editor.
\\n\\n3. GREY LITERATURE
\\n\\nWhite papers, working papers, technical reports and all other forms of papers which fall within the scope of the ‘Luxembourg definition’ of grey literature do not pass through any extensive peer or editorial review and we do not consider them to be published in the scholarly sense.
\\n\\nAlthough such papers are regularly made publicly available via personal websites and institutional repositories, their general purpose is to gather comments and feedback from Authors’ colleagues in order to further improve a manuscript intended for future publication.
\\n\\nWhen submitting their work, Authors are required to disclose the existence of any publicly available earlier drafts in a note to the Academic Editor. In cases where earlier drafts of the submitted version of the manuscript are publicly available, any overlap between the versions will generally not be considered an instance of self-plagiarism.
\\n\\n4. SOCIAL MEDIA, BLOG & MESSAGE BOARD POSTINGS
\\n\\nWe feel that social media, blogs and message boards are generally used with the same intention as grey literature, to formulate ideas for a manuscript and gather early feedback from like-minded researchers in order to improve a particular piece of work before submitting it for publication. Therefore, we do not consider such internet postings to be publication in the scholarly sense.
\\n\\nNevertheless, Authors are encouraged to disclose the existence of any internet postings in which they outline and describe their research or posted passages of their manuscripts in a note to the Academic Editor. Please note that we will not strictly enforce this request in the same way that we would instructions we consider to be part of our conditions of acceptance for publication. We understand that it may be difficult to keep track of all one’s internet postings in which the researcher´s current work might be mentioned.
\\n\\nIn cases where there is any overlap between the Author´s submitted manuscript and related internet postings, we will generally not consider it to be an instance of self-plagiarism. This also holds true for any co-Author as well.
\\n\\nFor more information on this policy please contact permissions@intechopen.com.
\\n\\nPolicy last updated: 2017-03-20
\\n"}]'},components:[{type:"htmlEditorComponent",content:'A significant number of working papers, early drafts, and similar work in progress are openly shared online between members of the scientific community. It has become common to announce one’s own research on a personal website or a blog to gather comments and suggestions from other researchers. Such works and online postings are, indeed, published in the sense that they are made publicly available. However, this does not mean that if submitted for publication by IntechOpen they are not original works. We differentiate between reviewed and non-reviewed works when determining whether a work is original and has been published in a scholarly sense or not.
\n\nThe significance of Peer Review cannot be overstated when it comes to defining, in our terms, what constitutes a published scientific work. Peer Review is widely considered to be the cornerstone of modern publishing processes and the key value-adding contribution to a scholarly manuscript that a publisher can make.
\n\nOther than the issue of originality, research misconduct is another major issue that all publishers have to address. IntechOpen’s Retraction & Correction Policy and various publication ethics guidelines identify both redundant publication and (self)plagiarism to fall within the definition of research misconduct, thus constituting grounds for rejection or the issue of a Retraction if the work has already been published.
\n\nIn order to facilitate the tracking of a manuscript’s publishing history and its development from its earliest draft to the manuscript submitted, we encourage Authors to disclose any instances of a manuscript’s prior publication, whether it be through a conference presentation, a newspaper article, a working paper publicly available in a repository or a blog post.
\n\nA note to the Academic Editor containing detailed information about a submitted manuscript’s previous public availability is the preferred means of reporting prior publication. This helps us determine if there are any earlier versions of a manuscript that should be disclosed to our readers or if any of those earlier versions should be cited and listed in a manuscript’s references.
\n\nSome basic information about the editorial treatment of different varieties of prior publication is laid out below:
\n\n1. CONFERENCE PAPERS & PRESENTATIONS
\n\nGiven that conference papers and presentations generally pass through some sort of peer or editorial review, we consider them to be published in the accepted scholarly sense, particularly if they are published as a part of conference proceedings.
\n\nAll submitted manuscripts originating from a previously published conference paper must contain at least 50% of new original content to be accepted for review and considered for publication.
\n\nAuthors are required to report any links their manuscript might have with their earlier conference papers and presentations in a note to the Academic Editor, as well as in the manuscript itself. Additionally, Authors should obtain any necessary permissions from the publisher of their conference paper if copyright transfer occurred during the publishing process. Failure to do so may prevent Us from publishing an otherwise worthy work.
\n\n2. NEWSPAPER & MAGAZINE ARTICLES
\n\nNewspaper and magazine articles usually do not pass through any extensive peer or editorial review and we do not consider them to be published in the scholarly sense. Articles appearing in newspapers and magazines rarely possess the depth and structure characteristic of scholarly articles.
\n\nSubmitted manuscripts stemming from a previous newspaper or magazine article will be accepted for review and considered for publication. However, Authors are strongly advised to report any such publication in an accompanying note to the External Editor.
\n\nAs with the conference papers and presentations, Authors should obtain any necessary permissions from the newspaper or magazine that published the work, and indicate that they have done so in a note to the External Editor.
\n\n3. GREY LITERATURE
\n\nWhite papers, working papers, technical reports and all other forms of papers which fall within the scope of the ‘Luxembourg definition’ of grey literature do not pass through any extensive peer or editorial review and we do not consider them to be published in the scholarly sense.
\n\nAlthough such papers are regularly made publicly available via personal websites and institutional repositories, their general purpose is to gather comments and feedback from Authors’ colleagues in order to further improve a manuscript intended for future publication.
\n\nWhen submitting their work, Authors are required to disclose the existence of any publicly available earlier drafts in a note to the Academic Editor. In cases where earlier drafts of the submitted version of the manuscript are publicly available, any overlap between the versions will generally not be considered an instance of self-plagiarism.
\n\n4. SOCIAL MEDIA, BLOG & MESSAGE BOARD POSTINGS
\n\nWe feel that social media, blogs and message boards are generally used with the same intention as grey literature, to formulate ideas for a manuscript and gather early feedback from like-minded researchers in order to improve a particular piece of work before submitting it for publication. Therefore, we do not consider such internet postings to be publication in the scholarly sense.
\n\nNevertheless, Authors are encouraged to disclose the existence of any internet postings in which they outline and describe their research or posted passages of their manuscripts in a note to the Academic Editor. Please note that we will not strictly enforce this request in the same way that we would instructions we consider to be part of our conditions of acceptance for publication. We understand that it may be difficult to keep track of all one’s internet postings in which the researcher´s current work might be mentioned.
\n\nIn cases where there is any overlap between the Author´s submitted manuscript and related internet postings, we will generally not consider it to be an instance of self-plagiarism. This also holds true for any co-Author as well.
\n\nFor more information on this policy please contact permissions@intechopen.com.
\n\nPolicy last updated: 2017-03-20
\n'}]},successStories:{items:[]},authorsAndEditors:{filterParams:{},profiles:[{id:"396",title:"Dr.",name:"Vedran",middleName:null,surname:"Kordic",slug:"vedran-kordic",fullName:"Vedran Kordic",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/396/images/7281_n.png",biography:"After obtaining his Master's degree in Mechanical Engineering he continued his education at the Vienna University of Technology where he obtained his PhD degree in 2004. He worked as a researcher at the Automation and Control Institute, Faculty of Electrical Engineering, Vienna University of Technology until 2008. His studies in robotics lead him not only to a PhD degree but also inspired him to co-found and build the International Journal of Advanced Robotic Systems - world's first Open Access journal in the field of robotics.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"441",title:"Ph.D.",name:"Jaekyu",middleName:null,surname:"Park",slug:"jaekyu-park",fullName:"Jaekyu Park",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/441/images/1881_n.jpg",biography:null,institutionString:null,institution:{name:"LG Corporation (South Korea)",country:{name:"Korea, South"}}},{id:"465",title:"Dr",name:"Christian",middleName:null,surname:"Martens",slug:"christian-martens",fullName:"Christian Martens",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"479",title:"Dr.",name:"Valentina",middleName:null,surname:"Colla",slug:"valentina-colla",fullName:"Valentina Colla",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/479/images/358_n.jpg",biography:null,institutionString:null,institution:{name:"Sant'Anna School of Advanced Studies",country:{name:"Italy"}}},{id:"494",title:"PhD",name:"Loris",middleName:null,surname:"Nanni",slug:"loris-nanni",fullName:"Loris Nanni",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/494/images/system/494.jpg",biography:"Loris Nanni received his Master Degree cum laude on June-2002 from the University of Bologna, and the April 26th 2006 he received his Ph.D. in Computer Engineering at DEIS, University of Bologna. On September, 29th 2006 he has won a post PhD fellowship from the university of Bologna (from October 2006 to October 2008), at the competitive examination he was ranked first in the industrial engineering area. He extensively served as referee for several international journals. He is author/coauthor of more than 100 research papers. He has been involved in some projects supported by MURST and European Community. His research interests include pattern recognition, bioinformatics, and biometric systems (fingerprint classification and recognition, signature verification, face recognition).",institutionString:null,institution:null},{id:"496",title:"Dr.",name:"Carlos",middleName:null,surname:"Leon",slug:"carlos-leon",fullName:"Carlos Leon",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Seville",country:{name:"Spain"}}},{id:"512",title:"Dr.",name:"Dayang",middleName:null,surname:"Jawawi",slug:"dayang-jawawi",fullName:"Dayang Jawawi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Technology Malaysia",country:{name:"Malaysia"}}},{id:"528",title:"Dr.",name:"Kresimir",middleName:null,surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/528/images/system/528.jpg",biography:"K. Delac received his B.Sc.E.E. degree in 2003 and is currentlypursuing a Ph.D. degree at the University of Zagreb, Faculty of Electrical Engineering andComputing. His current research interests are digital image analysis, pattern recognition andbiometrics.",institutionString:null,institution:{name:"University of Zagreb",country:{name:"Croatia"}}},{id:"557",title:"Dr.",name:"Andon",middleName:"Venelinov",surname:"Topalov",slug:"andon-topalov",fullName:"Andon Topalov",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/557/images/1927_n.jpg",biography:"Dr. Andon V. Topalov received the MSc degree in Control Engineering from the Faculty of Information Systems, Technologies, and Automation at Moscow State University of Civil Engineering (MGGU) in 1979. He then received his PhD degree in Control Engineering from the Department of Automation and Remote Control at Moscow State Mining University (MGSU), Moscow, in 1984. From 1985 to 1986, he was a Research Fellow in the Research Institute for Electronic Equipment, ZZU AD, Plovdiv, Bulgaria. In 1986, he joined the Department of Control Systems, Technical University of Sofia at the Plovdiv campus, where he is presently a Full Professor. He has held long-term visiting Professor/Scholar positions at various institutions in South Korea, Turkey, Mexico, Greece, Belgium, UK, and Germany. And he has coauthored one book and authored or coauthored more than 80 research papers in conference proceedings and journals. His current research interests are in the fields of intelligent control and robotics.",institutionString:null,institution:{name:"Technical University of Sofia",country:{name:"Bulgaria"}}},{id:"585",title:"Prof.",name:"Munir",middleName:null,surname:"Merdan",slug:"munir-merdan",fullName:"Munir Merdan",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/585/images/system/585.jpg",biography:"Munir Merdan received the M.Sc. degree in mechanical engineering from the Technical University of Sarajevo, Bosnia and Herzegovina, in 2001, and the Ph.D. degree in electrical engineering from the Vienna University of Technology, Vienna, Austria, in 2009.Since 2005, he has been at the Automation and Control Institute, Vienna University of Technology, where he is currently a Senior Researcher. His research interests include the application of agent technology for achieving agile control in the manufacturing environment.",institutionString:null,institution:null},{id:"605",title:"Prof",name:"Dil",middleName:null,surname:"Hussain",slug:"dil-hussain",fullName:"Dil Hussain",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/605/images/system/605.jpg",biography:"Dr. Dil Muhammad Akbar Hussain is a professor of Electronics Engineering & Computer Science at the Department of Energy Technology, Aalborg University Denmark. Professor Akbar has a Master degree in Digital Electronics from Govt. College University, Lahore Pakistan and a P-hD degree in Control Engineering from the School of Engineering and Applied Sciences, University of Sussex United Kingdom. Aalborg University has Two Satellite Campuses, one in Copenhagen (Aalborg University Copenhagen) and the other in Esbjerg (Aalborg University Esbjerg).\n· He is a member of prestigious IEEE (Institute of Electrical and Electronics Engineers), and IAENG (International Association of Engineers) organizations. \n· He is the chief Editor of the Journal of Software Engineering.\n· He is the member of the Editorial Board of International Journal of Computer Science and Software Technology (IJCSST) and International Journal of Computer Engineering and Information Technology. \n· He is also the Editor of Communication in Computer and Information Science CCIS-20 by Springer.\n· Reviewer For Many Conferences\nHe is the lead person in making collaboration agreements between Aalborg University and many universities of Pakistan, for which the MOU’s (Memorandum of Understanding) have been signed.\nProfessor Akbar is working in Academia since 1990, he started his career as a Lab demonstrator/TA at the University of Sussex. After finishing his P. hD degree in 1992, he served in the Industry as a Scientific Officer and continued his academic career as a visiting scholar for a number of educational institutions. In 1996 he joined National University of Science & Technology Pakistan (NUST) as an Associate Professor; NUST is one of the top few universities in Pakistan. In 1999 he joined an International Company Lineo Inc, Canada as Manager Compiler Group, where he headed the group for developing Compiler Tool Chain and Porting of Operating Systems for the BLACKfin processor. The processor development was a joint venture by Intel and Analog Devices. In 2002 Lineo Inc., was taken over by another company, so he joined Aalborg University Denmark as an Assistant Professor.\nProfessor Akbar has truly a multi-disciplined career and he continued his legacy and making progress in many areas of his interests both in teaching and research. He has contributed in stochastic estimation of control area especially, in the Multiple Target Tracking and Interactive Multiple Model (IMM) research, Ball & Beam Control Problem, Robotics, Levitation Control. He has contributed in developing Algorithms for Fingerprint Matching, Computer Vision and Face Recognition. He has been supervising Pattern Recognition, Formal Languages and Distributed Processing projects for several years. He has reviewed many books on Management, Computer Science. Currently, he is an active and permanent reviewer for many international conferences and symposia and the program committee member for many international conferences.\nIn teaching he has taught the core computer science subjects like, Digital Design, Real Time Embedded System Programming, Operating Systems, Software Engineering, Data Structures, Databases, Compiler Construction. In the Engineering side, Digital Signal Processing, Computer Architecture, Electronics Devices, Digital Filtering and Engineering Management.\nApart from his Academic Interest and activities he loves sport especially, Cricket, Football, Snooker and Squash. He plays cricket for Esbjerg city in the second division team as an opener wicket keeper batsman. He is a very good player of squash but has not played squash since his arrival in Denmark.",institutionString:null,institution:null},{id:"611",title:"Prof.",name:"T",middleName:null,surname:"Nagarajan",slug:"t-nagarajan",fullName:"T Nagarajan",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universiti Teknologi Petronas",country:{name:"Malaysia"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:6581},{group:"region",caption:"Middle and South America",value:2,count:5888},{group:"region",caption:"Africa",value:3,count:2381},{group:"region",caption:"Asia",value:4,count:12507},{group:"region",caption:"Australia and Oceania",value:5,count:1006},{group:"region",caption:"Europe",value:6,count:17528}],offset:12,limit:12,total:132501},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{topicId:"11"},books:[{type:"book",id:"11168",title:"Sulfur Industry",subtitle:null,isOpenForSubmission:!0,hash:"39d4f4522a9f465bfe15ec2d85ef8861",slug:null,bookSignature:"Dr. Enos Wamalwa Wambu and Dr. Esther Nthiga",coverURL:"https://cdn.intechopen.com/books/images_new/11168.jpg",editedByType:null,editors:[{id:"187655",title:"Dr.",name:"Enos",surname:"Wambu",slug:"enos-wambu",fullName:"Enos Wambu"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11449",title:"Telehealth / Telemedicine – The Far-Reaching Medicine for Everyone and Everywhere",subtitle:null,isOpenForSubmission:!0,hash:"71545975025beddf27aa2931e0af5408",slug:null,bookSignature:"Dr. Tang-Chuan Wang",coverURL:"https://cdn.intechopen.com/books/images_new/11449.jpg",editedByType:null,editors:[{id:"201262",title:"Dr.",name:"Tang-Chuan",surname:"Wang",slug:"tang-chuan-wang",fullName:"Tang-Chuan Wang"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11451",title:"Molecular Docking - Recent Advances",subtitle:null,isOpenForSubmission:!0,hash:"8c918a1973786c7059752b28601f1329",slug:null,bookSignature:"Dr. Erman Salih Istifli",coverURL:"https://cdn.intechopen.com/books/images_new/11451.jpg",editedByType:null,editors:[{id:"179007",title:"Dr.",name:"Erman Salih",surname:"Istifli",slug:"erman-salih-istifli",fullName:"Erman Salih Istifli"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11452",title:"Cryopreservation - Applications and Challenges",subtitle:null,isOpenForSubmission:!0,hash:"a6c3fd4384ff7deeab32fc82722c60e0",slug:null,bookSignature:"Dr. Marian Quain",coverURL:"https://cdn.intechopen.com/books/images_new/11452.jpg",editedByType:null,editors:[{id:"300385",title:"Dr.",name:"Marian",surname:"Quain",slug:"marian-quain",fullName:"Marian Quain"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11453",title:"Biomimetics - Bridging the Gap",subtitle:null,isOpenForSubmission:!0,hash:"173e62fa4d7bf5508cec3bdd8e3cb32d",slug:null,bookSignature:"Prof. Ziyad S. Haidar",coverURL:"https://cdn.intechopen.com/books/images_new/11453.jpg",editedByType:null,editors:[{id:"222709",title:"Prof.",name:"Ziyad S.",surname:"Haidar",slug:"ziyad-s.-haidar",fullName:"Ziyad S. Haidar"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11506",title:"Antenna Arrays",subtitle:null,isOpenForSubmission:!0,hash:"1b378e33d6f6e73721ee0dacbbb89aa1",slug:null,bookSignature:"Prof. Hussain Al-Rizzo, Dr. Nijas Kunju and Dr. Aldebaro Klautau",coverURL:"https://cdn.intechopen.com/books/images_new/11506.jpg",editedByType:null,editors:[{id:"153384",title:"Prof.",name:"Hussain",surname:"Al-Rizzo",slug:"hussain-al-rizzo",fullName:"Hussain Al-Rizzo"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11507",title:"New Generation of Sustainable Smart Cities",subtitle:null,isOpenForSubmission:!0,hash:"dc693757b86ab8742367a38cda6cb622",slug:null,bookSignature:"Prof. Amjad Almusaed and Prof. Asaad Almssad",coverURL:"https://cdn.intechopen.com/books/images_new/11507.jpg",editedByType:null,editors:[{id:"446856",title:"Prof.",name:"Amjad",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11509",title:"Wireless Power Transfer - Perspectives and Application",subtitle:null,isOpenForSubmission:!0,hash:"f188555eee4211fc24b6cca361983149",slug:null,bookSignature:"Dr. Kim Ho Yeap",coverURL:"https://cdn.intechopen.com/books/images_new/11509.jpg",editedByType:null,editors:[{id:"126825",title:"Dr.",name:"Kim Ho",surname:"Yeap",slug:"kim-ho-yeap",fullName:"Kim Ho Yeap"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11510",title:"New Trends in Electric Machines - Technology and Applications",subtitle:null,isOpenForSubmission:!0,hash:"f57b5e35a1bf18acd4fd0d41fe59f49c",slug:null,bookSignature:"Dr. Miguel Delgado Prieto, Dr. José Alfonso Antonino-Daviu and Dr. Roque A. Osornio-Rios",coverURL:"https://cdn.intechopen.com/books/images_new/11510.jpg",editedByType:null,editors:[{id:"234568",title:"Dr.",name:"Miguel",surname:"Delgado Prieto",slug:"miguel-delgado-prieto",fullName:"Miguel Delgado Prieto"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11512",title:"Photodetectors - Recent Advances, New Perspectives and Applications",subtitle:null,isOpenForSubmission:!0,hash:"01d4be8e37c9bf12fd8dcb67c135b29b",slug:null,bookSignature:"Prof. Kuan W. A. Chee",coverURL:"https://cdn.intechopen.com/books/images_new/11512.jpg",editedByType:null,editors:[{id:"206271",title:"Prof.",name:"Kuan",surname:"Chee",slug:"kuan-chee",fullName:"Kuan Chee"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11513",title:"Gas Sensors",subtitle:null,isOpenForSubmission:!0,hash:"8eeb7ab232fa8d5c723b61e0da251857",slug:null,bookSignature:"Dr. Soumen Dhara and Dr. Gorachand Dutta",coverURL:"https://cdn.intechopen.com/books/images_new/11513.jpg",editedByType:null,editors:[{id:"196334",title:"Dr.",name:"Soumen",surname:"Dhara",slug:"soumen-dhara",fullName:"Soumen Dhara"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11514",title:"Vision Sensors - Recent Advances",subtitle:null,isOpenForSubmission:!0,hash:"6da8427ef3062c142b4e9650a5fed534",slug:null,bookSignature:"Dr. Francisco J. Gallegos-Funes",coverURL:"https://cdn.intechopen.com/books/images_new/11514.jpg",editedByType:null,editors:[{id:"2868",title:"Dr.",name:"Francisco",surname:"Gallegos-Funes",slug:"francisco-gallegos-funes",fullName:"Francisco Gallegos-Funes"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:42},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:10},{group:"topic",caption:"Business, Management and Economics",value:7,count:6},{group:"topic",caption:"Chemistry",value:8,count:21},{group:"topic",caption:"Computer and Information Science",value:9,count:20},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:15},{group:"topic",caption:"Engineering",value:11,count:60},{group:"topic",caption:"Environmental Sciences",value:12,count:8},{group:"topic",caption:"Immunology and Microbiology",value:13,count:9},{group:"topic",caption:"Materials Science",value:14,count:27},{group:"topic",caption:"Mathematics",value:15,count:9},{group:"topic",caption:"Medicine",value:16,count:122},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:9},{group:"topic",caption:"Neuroscience",value:18,count:3},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:7},{group:"topic",caption:"Physics",value:20,count:11},{group:"topic",caption:"Psychology",value:21,count:10},{group:"topic",caption:"Robotics",value:22,count:4},{group:"topic",caption:"Social Sciences",value:23,count:9},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:4}],offset:12,limit:12,total:102},popularBooks:{featuredBooks:[{type:"book",id:"10584",title:"Engineered Wood Products for Construction",subtitle:null,isOpenForSubmission:!1,hash:"421757c56a3735986055250821275a51",slug:"engineered-wood-products-for-construction",bookSignature:"Meng Gong",coverURL:"https://cdn.intechopen.com/books/images_new/10584.jpg",editors:[{id:"274242",title:"Dr.",name:"Meng",middleName:null,surname:"Gong",slug:"meng-gong",fullName:"Meng Gong"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10222",title:"Demyelination Disorders",subtitle:null,isOpenForSubmission:!1,hash:"b6c26ceccacdde70c41c587361bd5558",slug:"demyelination-disorders",bookSignature:"Stavros J. Baloyannis, Fabian H. Rossi and Welwin Liu",coverURL:"https://cdn.intechopen.com/books/images_new/10222.jpg",editors:[{id:"156098",title:"Emeritus Prof.",name:"Stavros J.",middleName:"J.",surname:"Baloyannis",slug:"stavros-j.-baloyannis",fullName:"Stavros J. Baloyannis"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9544",title:"Global Trade in the Emerging Business Environment",subtitle:null,isOpenForSubmission:!1,hash:"fb8cb09b9599246add78d508a98273d5",slug:"global-trade-in-the-emerging-business-environment",bookSignature:"Muhammad Mohiuddin, Jingbin Wang , Md. Samim Al Azad and Selim Ahmed",coverURL:"https://cdn.intechopen.com/books/images_new/9544.jpg",editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10979",title:"Parenting",subtitle:"Challenges of Child Rearing in a Changing Society",isOpenForSubmission:!1,hash:"6f345ebcf4fd61e73643c69063a12c7b",slug:"parenting-challenges-of-child-rearing-in-a-changing-society",bookSignature:"Sayyed Ali Samadi",coverURL:"https://cdn.intechopen.com/books/images_new/10979.jpg",editors:[{id:"52145",title:"Dr.",name:"Sayyed Ali",middleName:null,surname:"Samadi",slug:"sayyed-ali-samadi",fullName:"Sayyed Ali Samadi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9808",title:"Contemporary Topics in Patient Safety",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"fb6371607c2c6c02c6a2af8892765aba",slug:"contemporary-topics-in-patient-safety-volume-1",bookSignature:"Stanislaw P. Stawicki and Michael S. Firstenberg",coverURL:"https://cdn.intechopen.com/books/images_new/9808.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10681",title:"Biodegradation Technology of Organic and Inorganic Pollutants",subtitle:null,isOpenForSubmission:!1,hash:"9a6e10e02788092872fd249436898e97",slug:"biodegradation-technology-of-organic-and-inorganic-pollutants",bookSignature:"Kassio Ferreira Mendes, Rodrigo Nogueira de Sousa and Kamila Cabral Mielke",coverURL:"https://cdn.intechopen.com/books/images_new/10681.jpg",editors:[{id:"197720",title:"Ph.D.",name:"Kassio",middleName:null,surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10764",title:"Antenna Systems",subtitle:null,isOpenForSubmission:!1,hash:"2fbf1c7a5d92723f08198fc9b526a8ad",slug:"antenna-systems",bookSignature:"Hussain Al-Rizzo and Said Abushamleh",coverURL:"https://cdn.intechopen.com/books/images_new/10764.jpg",editors:[{id:"153384",title:"Prof.",name:"Hussain",middleName:null,surname:"Al-Rizzo",slug:"hussain-al-rizzo",fullName:"Hussain Al-Rizzo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10668",title:"Sustainability of Concrete With Synthetic and Recycled Aggregates",subtitle:null,isOpenForSubmission:!1,hash:"55856c6a8bc3a5b21dae5a1af09a56b6",slug:"sustainability-of-concrete-with-synthetic-and-recycled-aggregates",bookSignature:"Hosam M. Saleh",coverURL:"https://cdn.intechopen.com/books/images_new/10668.jpg",editors:[{id:"144691",title:"Prof.",name:"Hosam",middleName:null,surname:"Saleh",slug:"hosam-saleh",fullName:"Hosam Saleh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10803",title:"Reactive Oxygen Species",subtitle:null,isOpenForSubmission:!1,hash:"176adcf090fdd1f93cb8ce3146e79ca1",slug:"reactive-oxygen-species",bookSignature:"Rizwan Ahmad",coverURL:"https://cdn.intechopen.com/books/images_new/10803.jpg",editors:[{id:"40482",title:null,name:"Rizwan",middleName:null,surname:"Ahmad",slug:"rizwan-ahmad",fullName:"Rizwan Ahmad"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9032",title:"Corporate Social Responsibility",subtitle:null,isOpenForSubmission:!1,hash:"f609bf3251d7cc7bae0099a4374adfc3",slug:"corporate-social-responsibility",bookSignature:"Beatrice Orlando",coverURL:"https://cdn.intechopen.com/books/images_new/9032.jpg",editors:[{id:"232969",title:"Prof.",name:"Beatrice",middleName:null,surname:"Orlando",slug:"beatrice-orlando",fullName:"Beatrice Orlando"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10351",title:"Enhanced Liposuction",subtitle:"New Perspectives and Techniques",isOpenForSubmission:!1,hash:"f08ed6de16da357614586c5b58ed4dfa",slug:"enhanced-liposuction-new-perspectives-and-techniques",bookSignature:"Diane Irvine Duncan",coverURL:"https://cdn.intechopen.com/books/images_new/10351.jpg",editors:[{id:"279869",title:"Dr.",name:"Diane Irvine",middleName:null,surname:"Duncan",slug:"diane-irvine-duncan",fullName:"Diane Irvine Duncan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10779",title:"21st Century Nanostructured Materials",subtitle:"Physics, Chemistry, Classification, and Emerging Applications in Industry, Biomedicine, and Agriculture",isOpenForSubmission:!1,hash:"72c67f97f9bef68200df115b5fd79884",slug:"21st-century-nanostructured-materials-physics-chemistry-classification-and-emerging-applications-in-industry-biomedicine-and-agriculture",bookSignature:"Phuong V. Pham",coverURL:"https://cdn.intechopen.com/books/images_new/10779.jpg",editors:[{id:"236073",title:"Dr.",name:"Phuong",middleName:"Viet",surname:"Pham",slug:"phuong-pham",fullName:"Phuong Pham"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:4386},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"10584",title:"Engineered Wood Products for Construction",subtitle:null,isOpenForSubmission:!1,hash:"421757c56a3735986055250821275a51",slug:"engineered-wood-products-for-construction",bookSignature:"Meng Gong",coverURL:"https://cdn.intechopen.com/books/images_new/10584.jpg",publishedDate:"April 28th 2022",numberOfDownloads:3665,editors:[{id:"274242",title:"Dr.",name:"Meng",middleName:null,surname:"Gong",slug:"meng-gong",fullName:"Meng Gong"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10222",title:"Demyelination Disorders",subtitle:null,isOpenForSubmission:!1,hash:"b6c26ceccacdde70c41c587361bd5558",slug:"demyelination-disorders",bookSignature:"Stavros J. Baloyannis, Fabian H. Rossi and Welwin Liu",coverURL:"https://cdn.intechopen.com/books/images_new/10222.jpg",publishedDate:"May 4th 2022",numberOfDownloads:1713,editors:[{id:"156098",title:"Emeritus Prof.",name:"Stavros J.",middleName:"J.",surname:"Baloyannis",slug:"stavros-j.-baloyannis",fullName:"Stavros J. Baloyannis"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9544",title:"Global Trade in the Emerging Business Environment",subtitle:null,isOpenForSubmission:!1,hash:"fb8cb09b9599246add78d508a98273d5",slug:"global-trade-in-the-emerging-business-environment",bookSignature:"Muhammad Mohiuddin, Jingbin Wang , Md. Samim Al Azad and Selim Ahmed",coverURL:"https://cdn.intechopen.com/books/images_new/9544.jpg",publishedDate:"April 28th 2022",numberOfDownloads:2481,editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10979",title:"Parenting",subtitle:"Challenges of Child Rearing in a Changing Society",isOpenForSubmission:!1,hash:"6f345ebcf4fd61e73643c69063a12c7b",slug:"parenting-challenges-of-child-rearing-in-a-changing-society",bookSignature:"Sayyed Ali Samadi",coverURL:"https://cdn.intechopen.com/books/images_new/10979.jpg",publishedDate:"May 4th 2022",numberOfDownloads:1107,editors:[{id:"52145",title:"Dr.",name:"Sayyed Ali",middleName:null,surname:"Samadi",slug:"sayyed-ali-samadi",fullName:"Sayyed Ali Samadi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9808",title:"Contemporary Topics in Patient Safety",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"fb6371607c2c6c02c6a2af8892765aba",slug:"contemporary-topics-in-patient-safety-volume-1",bookSignature:"Stanislaw P. Stawicki and Michael S. Firstenberg",coverURL:"https://cdn.intechopen.com/books/images_new/9808.jpg",publishedDate:"April 20th 2022",numberOfDownloads:3307,editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10681",title:"Biodegradation Technology of Organic and Inorganic Pollutants",subtitle:null,isOpenForSubmission:!1,hash:"9a6e10e02788092872fd249436898e97",slug:"biodegradation-technology-of-organic-and-inorganic-pollutants",bookSignature:"Kassio Ferreira Mendes, Rodrigo Nogueira de Sousa and Kamila Cabral Mielke",coverURL:"https://cdn.intechopen.com/books/images_new/10681.jpg",publishedDate:"April 20th 2022",numberOfDownloads:3266,editors:[{id:"197720",title:"Ph.D.",name:"Kassio",middleName:null,surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10764",title:"Antenna Systems",subtitle:null,isOpenForSubmission:!1,hash:"2fbf1c7a5d92723f08198fc9b526a8ad",slug:"antenna-systems",bookSignature:"Hussain Al-Rizzo and Said Abushamleh",coverURL:"https://cdn.intechopen.com/books/images_new/10764.jpg",publishedDate:"April 28th 2022",numberOfDownloads:1868,editors:[{id:"153384",title:"Prof.",name:"Hussain",middleName:null,surname:"Al-Rizzo",slug:"hussain-al-rizzo",fullName:"Hussain Al-Rizzo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10668",title:"Sustainability of Concrete With Synthetic and Recycled Aggregates",subtitle:null,isOpenForSubmission:!1,hash:"55856c6a8bc3a5b21dae5a1af09a56b6",slug:"sustainability-of-concrete-with-synthetic-and-recycled-aggregates",bookSignature:"Hosam M. Saleh",coverURL:"https://cdn.intechopen.com/books/images_new/10668.jpg",publishedDate:"May 4th 2022",numberOfDownloads:856,editors:[{id:"144691",title:"Prof.",name:"Hosam",middleName:null,surname:"Saleh",slug:"hosam-saleh",fullName:"Hosam Saleh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10803",title:"Reactive Oxygen Species",subtitle:null,isOpenForSubmission:!1,hash:"176adcf090fdd1f93cb8ce3146e79ca1",slug:"reactive-oxygen-species",bookSignature:"Rizwan Ahmad",coverURL:"https://cdn.intechopen.com/books/images_new/10803.jpg",publishedDate:"April 28th 2022",numberOfDownloads:1704,editors:[{id:"40482",title:null,name:"Rizwan",middleName:null,surname:"Ahmad",slug:"rizwan-ahmad",fullName:"Rizwan Ahmad"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9032",title:"Corporate Social Responsibility",subtitle:null,isOpenForSubmission:!1,hash:"f609bf3251d7cc7bae0099a4374adfc3",slug:"corporate-social-responsibility",bookSignature:"Beatrice Orlando",coverURL:"https://cdn.intechopen.com/books/images_new/9032.jpg",publishedDate:"March 16th 2022",numberOfDownloads:7489,editors:[{id:"232969",title:"Prof.",name:"Beatrice",middleName:null,surname:"Orlando",slug:"beatrice-orlando",fullName:"Beatrice Orlando"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"8737",title:"Rabies Virus at the Beginning of 21st Century",subtitle:null,isOpenForSubmission:!1,hash:"49cce3f548da548c718c865feb343509",slug:"rabies-virus-at-the-beginning-of-21st-century",bookSignature:"Sergey Tkachev",coverURL:"https://cdn.intechopen.com/books/images_new/8737.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"61139",title:"Dr.",name:"Sergey",middleName:null,surname:"Tkachev",slug:"sergey-tkachev",fullName:"Sergey Tkachev"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10861",title:"Furan Derivatives",subtitle:"Recent Advances and Applications",isOpenForSubmission:!1,hash:"fdfc39cecd82f91b0effac994f75c877",slug:"furan-derivatives-recent-advances-and-applications",bookSignature:"Anish Khan, Mohammed Muzibur Rahman, M. Ramesh, Salman Ahmad Khan and Abdullah Mohammed Ahmed Asiri",coverURL:"https://cdn.intechopen.com/books/images_new/10861.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"293058",title:"Dr.",name:"Anish",middleName:null,surname:"Khan",slug:"anish-khan",fullName:"Anish Khan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10356",title:"Natural Medicinal Plants",subtitle:null,isOpenForSubmission:!1,hash:"943e56ccaaf19ff696d25aa638ae37d6",slug:"natural-medicinal-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/10356.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10870",title:"Ultrasound Imaging",subtitle:"Current Topics",isOpenForSubmission:!1,hash:"2f0bc3733ab226d67fa73759ef0e12ad",slug:"ultrasound-imaging-current-topics",bookSignature:"Felix Okechukwu Erondu",coverURL:"https://cdn.intechopen.com/books/images_new/10870.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"68312",title:"Prof.",name:"Felix",middleName:null,surname:"Okechukwu Erondu",slug:"felix-okechukwu-erondu",fullName:"Felix Okechukwu Erondu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11392",title:"Leadership in a Changing World",subtitle:"A Multidimensional Perspective",isOpenForSubmission:!1,hash:"86a6d33cf601587e591064ce92effc02",slug:"leadership-in-a-changing-world-a-multidimensional-perspective",bookSignature:"Muhammad Mohiuddin, Bilal Khalid, Md. Samim Al Azad and Slimane Ed-dafali",coverURL:"https://cdn.intechopen.com/books/images_new/11392.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10400",title:"The Application of Ant Colony Optimization",subtitle:null,isOpenForSubmission:!1,hash:"f4fdfd07ee1ab99fb7c740d6d0c144c6",slug:"the-application-of-ant-colony-optimization",bookSignature:"Ali Soofastaei",coverURL:"https://cdn.intechopen.com/books/images_new/10400.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"257455",title:"Dr.",name:"Ali",middleName:null,surname:"Soofastaei",slug:"ali-soofastaei",fullName:"Ali Soofastaei"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10915",title:"Leadership",subtitle:"New Insights",isOpenForSubmission:!1,hash:"0d72e79892f2a020cee66a52d09de5a4",slug:"leadership-new-insights",bookSignature:"Mário Franco",coverURL:"https://cdn.intechopen.com/books/images_new/10915.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"105529",title:"Dr.",name:"Mário",middleName:null,surname:"Franco",slug:"mario-franco",fullName:"Mário Franco"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10683",title:"Technological Innovations and Advances in Hydropower Engineering",subtitle:null,isOpenForSubmission:!1,hash:"7ce7ad8768bd2cad155470fe1fd883f4",slug:"technological-innovations-and-advances-in-hydropower-engineering",bookSignature:"Yizi Shang, Ling Shang and Xiaofei Li",coverURL:"https://cdn.intechopen.com/books/images_new/10683.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"349630",title:"Dr.",name:"Yizi",middleName:null,surname:"Shang",slug:"yizi-shang",fullName:"Yizi Shang"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7102",title:"Pneumonia",subtitle:null,isOpenForSubmission:!1,hash:"9fd70142814192dcec58a176749f1b60",slug:"pneumonia",bookSignature:"Nima Rezaei",coverURL:"https://cdn.intechopen.com/books/images_new/7102.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"116250",title:"Dr.",name:"Nima",middleName:null,surname:"Rezaei",slug:"nima-rezaei",fullName:"Nima Rezaei"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9670",title:"Current Trends in Wheat Research",subtitle:null,isOpenForSubmission:!1,hash:"89d795987f1747a76eee532700d2093d",slug:"current-trends-in-wheat-research",bookSignature:"Mahmood-ur-Rahman Ansari",coverURL:"https://cdn.intechopen.com/books/images_new/9670.jpg",editedByType:"Edited by",publishedDate:"May 11th 2022",editors:[{id:"185476",title:"Dr.",name:"Mahmood-ur-Rahman",middleName:null,surname:"Ansari",slug:"mahmood-ur-rahman-ansari",fullName:"Mahmood-ur-Rahman Ansari"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"1370",title:"Manufacturing Engineering",slug:"technology-material-science-manufacturing-engineering",parent:{id:"292",title:"Material Science",slug:"technology-material-science"},numberOfBooks:4,numberOfSeries:0,numberOfAuthorsAndEditors:48,numberOfWosCitations:55,numberOfCrossrefCitations:45,numberOfDimensionsCitations:80,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicId:"1370",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"10045",title:"Fillers",subtitle:null,isOpenForSubmission:!1,hash:"aac44d6491e740af99bec2f62aa05883",slug:"fillers",bookSignature:"Emmanuel Flores Huicochea",coverURL:"https://cdn.intechopen.com/books/images_new/10045.jpg",editedByType:"Edited by",editors:[{id:"206705",title:"Dr.",name:"Emmanuel",middleName:null,surname:"Flores Huicochea",slug:"emmanuel-flores-huicochea",fullName:"Emmanuel Flores Huicochea"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6306",title:"Additive Manufacturing of High-performance Metals and Alloys",subtitle:"Modeling and Optimization",isOpenForSubmission:!1,hash:"0e08cc35cef3caf389096ca4b999742f",slug:"additive-manufacturing-of-high-performance-metals-and-alloys-modeling-and-optimization",bookSignature:"Igor V. Shishkovsky",coverURL:"https://cdn.intechopen.com/books/images_new/6306.jpg",editedByType:"Edited by",editors:[{id:"178616",title:"Prof.",name:"Igor",middleName:"V.",surname:"Shishkovsky",slug:"igor-shishkovsky",fullName:"Igor Shishkovsky"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5759",title:"Lamination",subtitle:"Theory and Application",isOpenForSubmission:!1,hash:"9a4f81291f9d75ed83b1f4f5e0b56f36",slug:"lamination-theory-and-application",bookSignature:"Charles A. Osheku",coverURL:"https://cdn.intechopen.com/books/images_new/5759.jpg",editedByType:"Edited by",editors:[{id:"148660",title:"Dr.",name:"Charles",middleName:"Attah",surname:"Osheku",slug:"charles-osheku",fullName:"Charles Osheku"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3683",title:"Engineering the Future",subtitle:null,isOpenForSubmission:!1,hash:null,slug:"engineering-the-future",bookSignature:"Laszlo Dudas",coverURL:"https://cdn.intechopen.com/books/images_new/3683.jpg",editedByType:"Edited by",editors:[{id:"135546",title:"Prof.",name:"Laszlo",middleName:null,surname:"Dudas",slug:"laszlo-dudas",fullName:"Laszlo Dudas"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:4,seriesByTopicCollection:[],seriesByTopicTotal:0,mostCitedChapters:[{id:"12376",doi:"10.5772/10380",title:"Digital Factory – Theory and Practice",slug:"digital-factory-theory-and-practice",totalDownloads:7025,totalCrossrefCites:8,totalDimensionsCites:13,abstract:null,book:{id:"3683",slug:"engineering-the-future",title:"Engineering the Future",fullTitle:"Engineering the Future"},signatures:"Milan Gregor and Stefan Medvecky",authors:null},{id:"60707",doi:"10.5772/intechopen.75832",title:"Processing Parameters for Selective Laser Sintering or Melting of Oxide Ceramics",slug:"processing-parameters-for-selective-laser-sintering-or-melting-of-oxide-ceramics",totalDownloads:2005,totalCrossrefCites:6,totalDimensionsCites:11,abstract:"In this chapter, we present a detailed introduction to the factors which influence laser powder bed fusion (LPBF) on oxide ceramics. These factors can be in general divided in three main categories: laser-related factors (wavelength, power, scanning speed, hatch distance, scan pattern, beam diameter, etc.), powder- and material-related factors (flowability, size distribution, shape, powder deposition, thickness of deposited layers, etc.), and other factors (pre- or post-processing, inert gas atmosphere, etc.). The process parameters directly affect the amount of energy delivered to the surface of the thin layer and the energy density absorbed by the powders; therefore, decide the physical and mechanical properties of the built parts, such as relative density, porosity, surface roughness, dimensional accuracy, strength, etc. The parameter-property relation is hence reviewed for the most studied oxide ceramic materials, including families from alumina, silica, and some ceramic mixtures. Among those parameters, reducing temperature gradient which decreases the thermal stresses is one of the key factors to improve the ceramic quality. Although realizing crack-free ceramics combined with a smooth surface is still a major challenge, through optimizing the parameters, it is possible for LPBF processed ceramic parts to achieve properties close to those of conventionally produced ceramics.",book:{id:"6306",slug:"additive-manufacturing-of-high-performance-metals-and-alloys-modeling-and-optimization",title:"Additive Manufacturing of High-performance Metals and Alloys",fullTitle:"Additive Manufacturing of High-performance Metals and Alloys - Modeling and Optimization"},signatures:"Haidong Zhang and Saniya LeBlanc",authors:[{id:"213235",title:"Prof.",name:"Saniya",middleName:null,surname:"LeBlanc",slug:"saniya-leblanc",fullName:"Saniya LeBlanc"},{id:"213239",title:"Dr.",name:"Haidong",middleName:null,surname:"Zhang",slug:"haidong-zhang",fullName:"Haidong Zhang"}]},{id:"59094",doi:"10.5772/intechopen.72973",title:"Structure and Properties of the Bulk Standard Samples and Cellular Energy Absorbers",slug:"structure-and-properties-of-the-bulk-standard-samples-and-cellular-energy-absorbers",totalDownloads:712,totalCrossrefCites:3,totalDimensionsCites:9,abstract:"The development of additive technology revealed a real prospect of their use for the manufacture of complex shapes. Now, it is possible to produce parts that previously were either very difficult to produce using the subtracting technology and joining technology, or it was not at all feasible. In the manufacture of parts of complex shape, it is necessary to use a supporting structure, which is necessary to place such a way that they can be easily removed. Additionally, they must necessarily be absent in certain places. In this regard, the preparation model can take significant time to satisfy all of these, often conflicting, requirements. In this paper, we show optimization examples of the model preparation with support structures for parts manufactured at the facility EOSINT M270 and used in medicine and engineering. Additional emphasis is on the fact that, during the manufacture of parts, solidification’s modes of massive parts differ from those of the thin-walled portions of parts. The results of the complex studies on the different stainless steels (including martensitic) are described with an emphasis on their structure and mechanical properties. The results of a honeycomb energy absorbers, which are quite seldom produced by the additive technologies, are presented in this chapter.",book:{id:"6306",slug:"additive-manufacturing-of-high-performance-metals-and-alloys-modeling-and-optimization",title:"Additive Manufacturing of High-performance Metals and Alloys",fullTitle:"Additive Manufacturing of High-performance Metals and Alloys - Modeling and Optimization"},signatures:"Pavel Kuznetcov, Anton Zhukov, Artem Deev, Vitaliy Bobyr and\nMikhail Staritcyn",authors:[{id:"223064",title:"Dr.",name:"Pavel",middleName:null,surname:"Kuznetsov",slug:"pavel-kuznetsov",fullName:"Pavel Kuznetsov"},{id:"227212",title:"Mr.",name:"Artem",middleName:null,surname:"Deev",slug:"artem-deev",fullName:"Artem Deev"},{id:"227213",title:"Mr.",name:"Vitaliy",middleName:null,surname:"Bobyr",slug:"vitaliy-bobyr",fullName:"Vitaliy Bobyr"},{id:"227215",title:"Mr.",name:"Anton",middleName:null,surname:"Zhukov",slug:"anton-zhukov",fullName:"Anton Zhukov"},{id:"227216",title:"Mr.",name:"Mikhail",middleName:null,surname:"Staritcyn",slug:"mikhail-staritcyn",fullName:"Mikhail Staritcyn"}]},{id:"59742",doi:"10.5772/intechopen.74331",title:"Advanced Technologies in Manufacturing 3D-Layered Structures for Defense and Aerospace",slug:"advanced-technologies-in-manufacturing-3d-layered-structures-for-defense-and-aerospace",totalDownloads:1790,totalCrossrefCites:6,totalDimensionsCites:7,abstract:"In the past 20 years, a great progress has been made in additive manufacturing techniques, which has led to numerous applications in aeronautical and defense structures. Though not all advanced materials and alloys, can be automatically layered by a rapid prototyping system or machine, several interesting application have seen the light of publicity in many sectors. Efforts are underway to apply the automated layering technologies in as many materials as possible, mostly nowadays plastics, reinforced-polymers, and metals can be processed by such systems in order to produce three-dimensional parts. The work is underway internationally in order to promote more and more applications of additive manufacturing or automated layering and to lower the costs in such systems. This paper aims at presenting a review of the additive manufacturing history presenting the major steps that lead to the explosion of this technology, and with a special focus on advanced 3D structures in aerospace and defense applications. An insight is also given on the four dimensions of manufacturing concept.",book:{id:"5759",slug:"lamination-theory-and-application",title:"Lamination",fullTitle:"Lamination - Theory and Application"},signatures:"Dionysios E. Mouzakis",authors:[{id:"107011",title:"Associate Prof.",name:"Dionysios",middleName:"E.",surname:"Mouzakis",slug:"dionysios-mouzakis",fullName:"Dionysios Mouzakis"}]},{id:"61242",doi:"10.5772/intechopen.76860",title:"Theory and Technology of Direct Laser Deposition",slug:"theory-and-technology-of-direct-laser-deposition",totalDownloads:1240,totalCrossrefCites:5,totalDimensionsCites:7,abstract:"Presently the additive technologies in manufacturing are widely developed in all industrialized countries. Replacing the traditional technology of casting and machining with additive technologies, one can significantly reduce material consumption and labor costs. They also allow obtaining products with desired properties. The most promising for manufacturing large-sized products is the additive technology of high-speed direct laser deposition. Using this technology allows to create complex parts and construction to one technological operation without using addition equipment and tools. This technology allows decreasing of consumption of raw materials and decrease amount of waste. Equipment for realization of DLD technology is universal and based on module design principle. DLD is based on layer-by-layer deposition and melting of powder by laser beam from using a sliced 3D computer-aided design (CAD) file. The materials used are powders based on Fe, Ni, and Ti. This chapter presents the results of machine design and research HS DLD technology from various materials.",book:{id:"6306",slug:"additive-manufacturing-of-high-performance-metals-and-alloys-modeling-and-optimization",title:"Additive Manufacturing of High-performance Metals and Alloys",fullTitle:"Additive Manufacturing of High-performance Metals and Alloys - Modeling and Optimization"},signatures:"Gleb Turichin and Olga Klimova-Korsmik",authors:[{id:"212068",title:"Dr.",name:null,middleName:null,surname:"Klimova-Korsmik",slug:"klimova-korsmik",fullName:"Klimova-Korsmik"}]}],mostDownloadedChaptersLast30Days:[{id:"60707",title:"Processing Parameters for Selective Laser Sintering or Melting of Oxide Ceramics",slug:"processing-parameters-for-selective-laser-sintering-or-melting-of-oxide-ceramics",totalDownloads:2009,totalCrossrefCites:6,totalDimensionsCites:11,abstract:"In this chapter, we present a detailed introduction to the factors which influence laser powder bed fusion (LPBF) on oxide ceramics. These factors can be in general divided in three main categories: laser-related factors (wavelength, power, scanning speed, hatch distance, scan pattern, beam diameter, etc.), powder- and material-related factors (flowability, size distribution, shape, powder deposition, thickness of deposited layers, etc.), and other factors (pre- or post-processing, inert gas atmosphere, etc.). The process parameters directly affect the amount of energy delivered to the surface of the thin layer and the energy density absorbed by the powders; therefore, decide the physical and mechanical properties of the built parts, such as relative density, porosity, surface roughness, dimensional accuracy, strength, etc. The parameter-property relation is hence reviewed for the most studied oxide ceramic materials, including families from alumina, silica, and some ceramic mixtures. Among those parameters, reducing temperature gradient which decreases the thermal stresses is one of the key factors to improve the ceramic quality. Although realizing crack-free ceramics combined with a smooth surface is still a major challenge, through optimizing the parameters, it is possible for LPBF processed ceramic parts to achieve properties close to those of conventionally produced ceramics.",book:{id:"6306",slug:"additive-manufacturing-of-high-performance-metals-and-alloys-modeling-and-optimization",title:"Additive Manufacturing of High-performance Metals and Alloys",fullTitle:"Additive Manufacturing of High-performance Metals and Alloys - Modeling and Optimization"},signatures:"Haidong Zhang and Saniya LeBlanc",authors:[{id:"213235",title:"Prof.",name:"Saniya",middleName:null,surname:"LeBlanc",slug:"saniya-leblanc",fullName:"Saniya LeBlanc"},{id:"213239",title:"Dr.",name:"Haidong",middleName:null,surname:"Zhang",slug:"haidong-zhang",fullName:"Haidong Zhang"}]},{id:"56537",title:"Multiscale Hierarchical Structure and Laminated Strengthening and Toughening Mechanisms",slug:"multiscale-hierarchical-structure-and-laminated-strengthening-and-toughening-mechanisms",totalDownloads:1461,totalCrossrefCites:3,totalDimensionsCites:3,abstract:"Metal matrix composites with multiscale hierarchical structure and laminated structure have been developed to provide a novel route to achieve high strength, toughness and ductility. In this chapter, a lot of scientific research has been carried out in the preparation, processing, properties and application of metal matrix composite. Many toughening mechanisms and fracture behavior of composites with multiscale hierarchical structure and laminated structure are overviewed. It is revealed that elastic property and yield strength of laminated composites follow the “rule of average.” However, the estimation of fracture elongation and fracture toughness is complex, which is inconsistent with the “rule of average.” The fracture elongation of laminated composites is related to the layer thickness size, interface, gradient structure, strain hardening exponent, strain rate parameter and tunnel crack, which are accompanied with crack deflection, crack blunting, crack bridging, stress redistribution, local stress deformation, interfacial delamination crack and so on. The concept of laminated composites can be extended by applying different combination of individual layer, and provides theoretical as well as experimental fundamentals on strengthening and toughening of metal matrix composites.",book:{id:"5759",slug:"lamination-theory-and-application",title:"Lamination",fullTitle:"Lamination - Theory and Application"},signatures:"Baoxi Liu, Lujun Huang, Lin Geng and Fuxing Yin",authors:[{id:"140305",title:"Dr.",name:"Lin",middleName:null,surname:"Geng",slug:"lin-geng",fullName:"Lin Geng"},{id:"197727",title:"Dr.",name:"Baoxi",middleName:null,surname:"Liu",slug:"baoxi-liu",fullName:"Baoxi Liu"},{id:"197732",title:"Prof.",name:"Lujun",middleName:null,surname:"Huang",slug:"lujun-huang",fullName:"Lujun Huang"},{id:"207654",title:"Prof.",name:"Fuxing",middleName:null,surname:"Yin",slug:"fuxing-yin",fullName:"Fuxing Yin"}]},{id:"56424",title:"Bending of Laminated Composite Plates in Layerwise Theory",slug:"bending-of-laminated-composite-plates-in-layerwise-theory",totalDownloads:1362,totalCrossrefCites:1,totalDimensionsCites:4,abstract:"Determination of stress‐strain state in contemporary laminated composite plates containing layers with continuous unidirectional fibers requires the application of refined plate theories, which include layerwise theory. In contrast to homogeneous isotropic plates, heterogeneity of the anisotropic structure of laminated composite plates often leads to the appearance of imperfections in the connection between the layers. Mathematical models, which are formed on the assumption that the plate is homogeneous and isotropic, cannot properly include irregularities that can occur at the level of the layer in the process of manufacture, transportation, installation, or exploitation. Mathematical models of layerwise theory allow defining a more realistic stress‐strain state through the thickness of the plate, where consideration is carried out at the level of the layer. Additionally, this model makes possible to include delaminations that might occur on the connection between the individual layers. In this chapter, Reddy's layerwise theory is applied in order to determine equations for the problem of bending of laminated composite plates. The bending equations are solved by applying analytical method by means of double trigonometric series, as well as by using numerical methods based on the finite elements. This chapter presents examples for both applied approaches.",book:{id:"5759",slug:"lamination-theory-and-application",title:"Lamination",fullTitle:"Lamination - Theory and Application"},signatures:"Marina Rakočević",authors:[{id:"205043",title:"Prof.",name:"Marina",middleName:null,surname:"Rakocevic",slug:"marina-rakocevic",fullName:"Marina Rakocevic"}]},{id:"59742",title:"Advanced Technologies in Manufacturing 3D-Layered Structures for Defense and Aerospace",slug:"advanced-technologies-in-manufacturing-3d-layered-structures-for-defense-and-aerospace",totalDownloads:1790,totalCrossrefCites:6,totalDimensionsCites:7,abstract:"In the past 20 years, a great progress has been made in additive manufacturing techniques, which has led to numerous applications in aeronautical and defense structures. Though not all advanced materials and alloys, can be automatically layered by a rapid prototyping system or machine, several interesting application have seen the light of publicity in many sectors. Efforts are underway to apply the automated layering technologies in as many materials as possible, mostly nowadays plastics, reinforced-polymers, and metals can be processed by such systems in order to produce three-dimensional parts. The work is underway internationally in order to promote more and more applications of additive manufacturing or automated layering and to lower the costs in such systems. This paper aims at presenting a review of the additive manufacturing history presenting the major steps that lead to the explosion of this technology, and with a special focus on advanced 3D structures in aerospace and defense applications. An insight is also given on the four dimensions of manufacturing concept.",book:{id:"5759",slug:"lamination-theory-and-application",title:"Lamination",fullTitle:"Lamination - Theory and Application"},signatures:"Dionysios E. Mouzakis",authors:[{id:"107011",title:"Associate Prof.",name:"Dionysios",middleName:"E.",surname:"Mouzakis",slug:"dionysios-mouzakis",fullName:"Dionysios Mouzakis"}]},{id:"12371",title:"Procedures and Methods of Quality Planning and Their Use for Forming Process Optimization",slug:"procedures-and-methods-of-quality-planning-and-their-use-for-forming-process-optimization",totalDownloads:15248,totalCrossrefCites:0,totalDimensionsCites:1,abstract:null,book:{id:"3683",slug:"engineering-the-future",title:"Engineering the Future",fullTitle:"Engineering the Future"},signatures:"Jiri Plura",authors:null}],onlineFirstChaptersFilter:{topicId:"1370",limit:6,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},subscriptionForm:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[],offset:8,limit:8,total:0},allSeries:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:8,numberOfPublishedChapters:87,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:98,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:27,numberOfPublishedChapters:286,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:9,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:11,numberOfPublishedChapters:139,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:8,numberOfPublishedChapters:129,numberOfOpenTopics:0,numberOfUpcomingTopics:2,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!1},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:105,numberOfOpenTopics:3,numberOfUpcomingTopics:1,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:9,numberOfPublishedChapters:101,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:11,numberOfOpenTopics:2,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:0,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!1},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:0,numberOfPublishedChapters:9,numberOfOpenTopics:4,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],testimonialsList:[{id:"6",text:"It is great to work with the IntechOpen to produce a worthwhile collection of research that also becomes a great educational resource and guide for future research endeavors.",author:{id:"259298",name:"Edward",surname:"Narayan",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/259298/images/system/259298.jpeg",slug:"edward-narayan",institution:{id:"3",name:"University of Queensland",country:{id:null,name:"Australia"}}}},{id:"13",text:"The collaboration with and support of the technical staff of IntechOpen is fantastic. The whole process of submitting an article and editing of the submitted article goes extremely smooth and fast, the number of reads and downloads of chapters is high, and the contributions are also frequently cited.",author:{id:"55578",name:"Antonio",surname:"Jurado-Navas",institutionString:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRisIQAS/Profile_Picture_1626166543950",slug:"antonio-jurado-navas",institution:{id:"720",name:"University of Malaga",country:{id:null,name:"Spain"}}}}]},series:{item:{id:"22",title:"Business, Management and Economics",doi:"10.5772/intechopen.100359",issn:null,scope:"\r\n\tThis series will provide a comprehensive overview of recent research trends in business and management, economics, and marketing. Topics will include asset liability management, financial consequences of the financial crisis and covid-19, financial accounting, mergers and acquisitions, management accounting, SMEs, financial markets, corporate finance and governance, managerial technology and innovation, resource management and sustainable development, social entrepreneurship, corporate responsibility, ethics and accountability, microeconomics, labour economics, macroeconomics, public economics, financial economics, econometrics, direct marketing, creative marketing, internet marketing, market planning and forecasting, brand management, market segmentation and targeting and other topics under business and management. This book series will focus on various aspects of business and management whose in-depth understanding is critical for business and company management to function effectively during this uncertain time of financial crisis, Covid-19 pandemic, and military activity in Europe.
",coverUrl:"https://cdn.intechopen.com/series/covers/22.jpg",latestPublicationDate:"May 11th, 2022",hasOnlineFirst:!1,numberOfPublishedBooks:1,editor:{id:"356540",title:"Prof.",name:"Taufiq",middleName:null,surname:"Choudhry",slug:"taufiq-choudhry",fullName:"Taufiq Choudhry",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000036X2hvQAC/Profile_Picture_2022-03-14T08:58:03.jpg",biography:"Prof. Choudhry holds a BSc degree in Economics from the University of Iowa, as well as a Masters and Ph.D. in Applied Economics from Clemson University, USA. In January 2006, he became a Professor of Finance at the University of Southampton Business School. He was previously a Professor of Finance at the University of Bradford Management School. He has over 80 articles published in international finance and economics journals. His research interests and specialties include financial econometrics, financial economics, international economics and finance, housing markets, financial markets, among others.",institutionString:null,institution:{name:"University of Southampton",institutionURL:null,country:{name:"United Kingdom"}}},editorTwo:null,editorThree:null},subseries:{paginationCount:0,paginationItems:[]},overviewPageOFChapters:{paginationCount:0,paginationItems:[]},overviewPagePublishedBooks:{paginationCount:0,paginationItems:[]},openForSubmissionBooks:{paginationCount:3,paginationItems:[{id:"11675",title:"Advances in Skeletal Muscle Health and Disease",coverURL:"https://cdn.intechopen.com/books/images_new/11675.jpg",hash:"e1d9662c334dd78ab35bfb57c3bf106e",secondStepPassed:!0,currentStepOfPublishingProcess:3,submissionDeadline:"April 19th 2022",isOpenForSubmission:!0,editors:[{id:"281317",title:"Dr.",name:"Fabio",surname:"Iannotti",slug:"fabio-iannotti",fullName:"Fabio Iannotti"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{id:"11677",title:"New Insights in Mammalian Endocrinology",coverURL:"https://cdn.intechopen.com/books/images_new/11677.jpg",hash:"c59dd0f87bbf829ca091c485f4cc4e68",secondStepPassed:!0,currentStepOfPublishingProcess:3,submissionDeadline:"May 5th 2022",isOpenForSubmission:!0,editors:[{id:"321396",title:"Prof.",name:"Muhammad Subhan",surname:"Qureshi",slug:"muhammad-subhan-qureshi",fullName:"Muhammad Subhan Qureshi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{id:"11676",title:"Recent Advances in Homeostasis",coverURL:"https://cdn.intechopen.com/books/images_new/11676.jpg",hash:"63eb775115bf2d6d88530b234a1cc4c2",secondStepPassed:!1,currentStepOfPublishingProcess:2,submissionDeadline:"June 10th 2022",isOpenForSubmission:!0,editors:[{id:"203015",title:"Dr.",name:"Gaffar",surname:"Zaman",slug:"gaffar-zaman",fullName:"Gaffar Zaman"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},onlineFirstChapters:{paginationCount:2,paginationItems:[{id:"81644",title:"Perspective Chapter: Ethics of Using Placebo Controlled Trials for Covid-19 Vaccine Development in Vulnerable Populations",doi:"10.5772/intechopen.104776",signatures:"Lesley Burgess, Jurie Jordaan and Matthew Wilson",slug:"perspective-chapter-ethics-of-using-placebo-controlled-trials-for-covid-19-vaccine-development-in-vu",totalDownloads:4,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"SARS-CoV-2 Variants - Two Years After",coverURL:"https://cdn.intechopen.com/books/images_new/11573.jpg",subseries:{id:"6",title:"Viral Infectious Diseases"}}},{id:"80546",title:"Streptococcal Skin and Skin-Structure Infections",doi:"10.5772/intechopen.102894",signatures:"Alwyn Rapose",slug:"streptococcal-skin-and-skin-structure-infections",totalDownloads:48,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Streptococcal Infections",coverURL:"https://cdn.intechopen.com/books/images_new/10828.jpg",subseries:{id:"3",title:"Bacterial Infectious Diseases"}}}]},subseriesFiltersForOFChapters:[{caption:"Bacterial Infectious Diseases",value:3,count:1,group:"subseries"},{caption:"Viral Infectious Diseases",value:6,count:1,group:"subseries"}],publishedBooks:{paginationCount:0,paginationItems:[]},subseriesFiltersForPublishedBooks:[],publicationYearFilters:[],authors:{paginationCount:249,paginationItems:[{id:"274452",title:"Dr.",name:"Yousif",middleName:"Mohamed",surname:"Abdallah",slug:"yousif-abdallah",fullName:"Yousif Abdallah",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/274452/images/8324_n.jpg",biography:"I certainly enjoyed my experience in Radiotherapy and Nuclear Medicine, particularly it has been in different institutions and hospitals with different Medical Cultures and allocated resources. Radiotherapy and Nuclear Medicine Technology has always been my aspiration and my life. As years passed I accumulated a tremendous amount of skills and knowledge in Radiotherapy and Nuclear Medicine, Conventional Radiology, Radiation Protection, Bioinformatics Technology, PACS, Image processing, clinically and lecturing that will enable me to provide a valuable service to the community as a Researcher and Consultant in this field. My method of translating this into day to day in clinical practice is non-exhaustible and my habit of exchanging knowledge and expertise with others in those fields is the code and secret of success.",institutionString:null,institution:{name:"Majmaah University",country:{name:"Saudi Arabia"}}},{id:"313277",title:"Dr.",name:"Bartłomiej",middleName:null,surname:"Płaczek",slug:"bartlomiej-placzek",fullName:"Bartłomiej Płaczek",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/313277/images/system/313277.jpg",biography:"Bartłomiej Płaczek, MSc (2002), Ph.D. (2005), Habilitation (2016), is a professor at the University of Silesia, Institute of Computer Science, Poland, and an expert from the National Centre for Research and Development. His research interests include sensor networks, smart sensors, intelligent systems, and image processing with applications in healthcare and medicine. He is the author or co-author of more than seventy papers in peer-reviewed journals and conferences as well as the co-author of several books. He serves as a reviewer for many scientific journals, international conferences, and research foundations. Since 2010, Dr. Placzek has been a reviewer of grants and projects (including EU projects) in the field of information technologies.",institutionString:"University of Silesia",institution:{name:"University of Silesia",country:{name:"Poland"}}},{id:"35000",title:"Prof.",name:"Ulrich H.P",middleName:"H.P.",surname:"Fischer",slug:"ulrich-h.p-fischer",fullName:"Ulrich H.P Fischer",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/35000/images/3052_n.jpg",biography:"Academic and Professional Background\nUlrich H. P. has Diploma and PhD degrees in Physics from the Free University Berlin, Germany. He has been working on research positions in the Heinrich-Hertz-Institute in Germany. Several international research projects has been performed with European partners from France, Netherlands, Norway and the UK. He is currently Professor of Communications Systems at the Harz University of Applied Sciences, Germany.\n\nPublications and Publishing\nHe has edited one book, a special interest book about ‘Optoelectronic Packaging’ (VDE, Berlin, Germany), and has published over 100 papers and is owner of several international patents for WDM over POF key elements.\n\nKey Research and Consulting Interests\nUlrich’s research activity has always been related to Spectroscopy and Optical Communications Technology. Specific current interests include the validation of complex instruments, and the application of VR technology to the development and testing of measurement systems. He has been reviewer for several publications of the Optical Society of America\\'s including Photonics Technology Letters and Applied Optics.\n\nPersonal Interests\nThese include motor cycling in a very relaxed manner and performing martial arts.",institutionString:null,institution:{name:"Charité",country:{name:"Germany"}}},{id:"341622",title:"Ph.D.",name:"Eduardo",middleName:null,surname:"Rojas Alvarez",slug:"eduardo-rojas-alvarez",fullName:"Eduardo Rojas Alvarez",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/341622/images/15892_n.jpg",biography:null,institutionString:null,institution:{name:"University of Cuenca",country:{name:"Ecuador"}}},{id:"215610",title:"Prof.",name:"Muhammad",middleName:null,surname:"Sarfraz",slug:"muhammad-sarfraz",fullName:"Muhammad Sarfraz",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/215610/images/system/215610.jpeg",biography:"Muhammad Sarfraz is a professor in the Department of Information Science, Kuwait University, Kuwait. His research interests include optimization, computer graphics, computer vision, image processing, machine learning, pattern recognition, soft computing, data science, and intelligent systems. Prof. Sarfraz has been a keynote/invited speaker at various platforms around the globe. He has advised/supervised more than 110 students for their MSc and Ph.D. theses. He has published more than 400 publications as books, journal articles, and conference papers. He has authored and/or edited around seventy books. Prof. Sarfraz is a member of various professional societies. He is a chair and member of international advisory committees and organizing committees of numerous international conferences. He is also an editor and editor in chief for various international journals.",institutionString:"Kuwait University",institution:{name:"Kuwait University",country:{name:"Kuwait"}}},{id:"32650",title:"Prof.",name:"Lukas",middleName:"Willem",surname:"Snyman",slug:"lukas-snyman",fullName:"Lukas Snyman",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/32650/images/4136_n.jpg",biography:"Lukas Willem Snyman received his basic education at primary and high schools in South Africa, Eastern Cape. He enrolled at today's Nelson Metropolitan University and graduated from this university with a BSc in Physics and Mathematics, B.Sc Honors in Physics, MSc in Semiconductor Physics, and a Ph.D. in Semiconductor Physics in 1987. After his studies, he chose an academic career and devoted his energy to the teaching of physics to first, second, and third-year students. After positions as a lecturer at the University of Port Elizabeth, he accepted a position as Associate Professor at the University of Pretoria, South Africa.\r\n\r\nIn 1992, he motivates the concept of 'television and computer-based education” as means to reach large student numbers with only the best of teaching expertise and publishes an article on the concept in the SA Journal of Higher Education of 1993 (and later in 2003). The University of Pretoria subsequently approved a series of test projects on the concept with outreach to Mamelodi and Eerste Rust in 1993. In 1994, the University established a 'Unit for Telematic Education ' as a support section for multiple faculties at the University of Pretoria. In subsequent years, the concept of 'telematic education” subsequently becomes well established in academic circles in South Africa, grew in popularity, and is adopted by many universities and colleges throughout South Africa as a medium of enhancing education and training, as a method to reaching out to far out communities, and as a means to enhance study from the home environment.\r\n\r\nProfessor Snyman in subsequent years pursued research in semiconductor physics, semiconductor devices, microelectronics, and optoelectronics.\r\n\r\nIn 2000 he joined the TUT as a full professor. Here served for a period as head of the Department of Electronic Engineering. Here he makes contributions to solar energy development, microwave and optoelectronic device development, silicon photonics, as well as contributions to new mobile telecommunication systems and network planning in SA.\r\n\r\nCurrently, he teaches electronics and telecommunications at the TUT to audiences ranging from first-year students to Ph.D. level.\r\n\r\nFor his research in the field of 'Silicon Photonics” since 1990, he has published (as author and co-author) about thirty internationally reviewed articles in scientific journals, contributed to more than forty international conferences, about 25 South African provisional patents (as inventor and co-inventor), 8 PCT international patent applications until now. Of these, two USA patents applications, two European Patents, two Korean patents, and ten SA patents have been granted. A further 4 USA patents, 5 European patents, 3 Korean patents, 3 Chinese patents, and 3 Japanese patents are currently under consideration.\r\n\r\nRecently he has also published an extensive scholarly chapter in an internet open access book on 'Integrating Microphotonic Systems and MOEMS into standard Silicon CMOS Integrated circuitry”.\r\n\r\nFurthermore, Professor Snyman recently steered a new initiative at the TUT by introducing a 'Laboratory for Innovative Electronic Systems ' at the Department of Electrical Engineering. The model of this laboratory or center is to primarily combine outputs as achieved by high-level research with lower-level system development and entrepreneurship in a technical university environment. Students are allocated to projects at different levels with PhDs and Master students allocated to the generation of new knowledge and new technologies, while students at the diploma and Baccalaureus level are allocated to electronic systems development with a direct and a near application for application in industry or the commercial and public sectors in South Africa.\r\n\r\nProfessor Snyman received the WIRSAM Award of 1983 and the WIRSAM Award in 1985 in South Africa for best research papers by a young scientist at two international conferences on electron microscopy in South Africa. He subsequently received the SA Microelectronics Award for the best dissertation emanating from studies executed at a South African university in the field of Physics and Microelectronics in South Africa in 1987. In October of 2011, Professor Snyman received the prestigious Institutional Award for 'Innovator of the Year” for 2010 at the Tshwane University of Technology, South Africa. This award was based on the number of patents recognized and granted by local and international institutions as well as for his contributions concerning innovation at the TUT.",institutionString:null,institution:{name:"University of South Africa",country:{name:"South Africa"}}},{id:"317279",title:"Mr.",name:"Ali",middleName:"Usama",surname:"Syed",slug:"ali-syed",fullName:"Ali Syed",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/317279/images/16024_n.png",biography:"A creative, talented, and innovative young professional who is dedicated, well organized, and capable research fellow with two years of experience in graduate-level research, published in engineering journals and book, with related expertise in Bio-robotics, equally passionate about the aesthetics of the mechanical and electronic system, obtained expertise in the use of MS Office, MATLAB, SolidWorks, LabVIEW, Proteus, Fusion 360, having a grasp on python, C++ and assembly language, possess proven ability in acquiring research grants, previous appointments with social and educational societies with experience in administration, current affiliations with IEEE and Web of Science, a confident presenter at conferences and teacher in classrooms, able to explain complex information to audiences of all levels.",institutionString:null,institution:{name:"Air University",country:{name:"Pakistan"}}},{id:"75526",title:"Ph.D.",name:"Zihni Onur",middleName:null,surname:"Uygun",slug:"zihni-onur-uygun",fullName:"Zihni Onur Uygun",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/75526/images/12_n.jpg",biography:"My undergraduate education and my Master of Science educations at Ege University and at Çanakkale Onsekiz Mart University have given me a firm foundation in Biochemistry, Analytical Chemistry, Biosensors, Bioelectronics, Physical Chemistry and Medicine. After obtaining my degree as a MSc in analytical chemistry, I started working as a research assistant in Ege University Medical Faculty in 2014. In parallel, I enrolled to the MSc program at the Department of Medical Biochemistry at Ege University to gain deeper knowledge on medical and biochemical sciences as well as clinical chemistry in 2014. In my PhD I deeply researched on biosensors and bioelectronics and finished in 2020. Now I have eleven SCI-Expanded Index published papers, 6 international book chapters, referee assignments for different SCIE journals, one international patent pending, several international awards, projects and bursaries. In parallel to my research assistant position at Ege University Medical Faculty, Department of Medical Biochemistry, in April 2016, I also founded a Start-Up Company (Denosens Biotechnology LTD) by the support of The Scientific and Technological Research Council of Turkey. Currently, I am also working as a CEO in Denosens Biotechnology. The main purposes of the company, which carries out R&D as a research center, are to develop new generation biosensors and sensors for both point-of-care diagnostics; such as glucose, lactate, cholesterol and cancer biomarker detections. My specific experimental and instrumental skills are Biochemistry, Biosensor, Analytical Chemistry, Electrochemistry, Mobile phone based point-of-care diagnostic device, POCTs and Patient interface designs, HPLC, Tandem Mass Spectrometry, Spectrophotometry, ELISA.",institutionString:null,institution:{name:"Ege University",country:{name:"Turkey"}}},{id:"246502",title:"Dr.",name:"Jaya T.",middleName:"T",surname:"Varkey",slug:"jaya-t.-varkey",fullName:"Jaya T. Varkey",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/246502/images/11160_n.jpg",biography:"Jaya T. Varkey, PhD, graduated with a degree in Chemistry from Cochin University of Science and Technology, Kerala, India. She obtained a PhD in Chemistry from the School of Chemical Sciences, Mahatma Gandhi University, Kerala, India, and completed a post-doctoral fellowship at the University of Minnesota, USA. She is a research guide at Mahatma Gandhi University and Associate Professor in Chemistry, St. Teresa’s College, Kochi, Kerala, India.\nDr. Varkey received a National Young Scientist award from the Indian Science Congress (1995), a UGC Research award (2016–2018), an Indian National Science Academy (INSA) Visiting Scientist award (2018–2019), and a Best Innovative Faculty award from the All India Association for Christian Higher Education (AIACHE) (2019). She Hashas received the Sr. Mary Cecil prize for best research paper three times. She was also awarded a start-up to develop a tea bag water filter. \nDr. Varkey has published two international books and twenty-seven international journal publications. She is an editorial board member for five international journals.",institutionString:"St. Teresa’s College",institution:null},{id:"250668",title:"Dr.",name:"Ali",middleName:null,surname:"Nabipour Chakoli",slug:"ali-nabipour-chakoli",fullName:"Ali Nabipour Chakoli",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/250668/images/system/250668.jpg",biography:"Academic Qualification:\r\n•\tPhD in Materials Physics and Chemistry, From: Sep. 2006, to: Sep. 2010, School of Materials Science and Engineering, Harbin Institute of Technology, Thesis: Structure and Shape Memory Effect of Functionalized MWCNTs/poly (L-lactide-co-ε-caprolactone) Nanocomposites. Supervisor: Prof. Wei Cai,\r\n•\tM.Sc in Applied Physics, From: 1996, to: 1998, Faculty of Physics & Nuclear Science, Amirkabir Uni. of Technology, Tehran, Iran, Thesis: Determination of Boron in Micro alloy Steels with solid state nuclear track detectors by neutron induced auto radiography, Supervisors: Dr. M. Hosseini Ashrafi and Dr. A. Hosseini.\r\n•\tB.Sc. in Applied Physics, From: 1991, to: 1996, Faculty of Physics & Nuclear Science, Amirkabir Uni. of Technology, Tehran, Iran, Thesis: Design of shielding for Am-Be neutron sources for In Vivo neutron activation analysis, Supervisor: Dr. M. Hosseini Ashrafi.\r\n\r\nResearch Experiences:\r\n1.\tNanomaterials, Carbon Nanotubes, Graphene: Synthesis, Functionalization and Characterization,\r\n2.\tMWCNTs/Polymer Composites: Fabrication and Characterization, \r\n3.\tShape Memory Polymers, Biodegradable Polymers, ORC, Collagen,\r\n4.\tMaterials Analysis and Characterizations: TEM, SEM, XPS, FT-IR, Raman, DSC, DMA, TGA, XRD, GPC, Fluoroscopy, \r\n5.\tInteraction of Radiation with Mater, Nuclear Safety and Security, NDT(RT),\r\n6.\tRadiation Detectors, Calibration (SSDL),\r\n7.\tCompleted IAEA e-learning Courses:\r\nNuclear Security (15 Modules),\r\nNuclear Safety:\r\nTSA 2: Regulatory Protection in Occupational Exposure,\r\nTips & Tricks: Radiation Protection in Radiography,\r\nSafety and Quality in Radiotherapy,\r\nCourse on Sealed Radioactive Sources,\r\nCourse on Fundamentals of Environmental Remediation,\r\nCourse on Planning for Environmental Remediation,\r\nKnowledge Management Orientation Course,\r\nFood Irradiation - Technology, Applications and Good Practices,\r\nEmployment:\r\nFrom 2010 to now: Academic staff, Nuclear Science and Technology Research Institute, Kargar Shomali, Tehran, Iran, P.O. Box: 14395-836.\r\nFrom 1997 to 2006: Expert of Materials Analysis and Characterization. Research Center of Agriculture and Medicine. Rajaeeshahr, Karaj, Iran, P. O. Box: 31585-498.",institutionString:"Atomic Energy Organization of Iran",institution:{name:"Atomic Energy Organization of Iran",country:{name:"Iran"}}},{id:"248279",title:"Dr.",name:"Monika",middleName:"Elzbieta",surname:"Machoy",slug:"monika-machoy",fullName:"Monika Machoy",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/248279/images/system/248279.jpeg",biography:"Monika Elżbieta Machoy, MD, graduated with distinction from the Faculty of Medicine and Dentistry at the Pomeranian Medical University in 2009, defended her PhD thesis with summa cum laude in 2016 and is currently employed as a researcher at the Department of Orthodontics of the Pomeranian Medical University. She expanded her professional knowledge during a one-year scholarship program at the Ernst Moritz Arndt University in Greifswald, Germany and during a three-year internship at the Technical University in Dresden, Germany. She has been a speaker at numerous orthodontic conferences, among others, American Association of Orthodontics, European Orthodontic Symposium and numerous conferences of the Polish Orthodontic Society. She conducts research focusing on the effect of orthodontic treatment on dental and periodontal tissues and the causes of pain in orthodontic patients.",institutionString:"Pomeranian Medical University",institution:{name:"Pomeranian Medical University",country:{name:"Poland"}}},{id:"252743",title:"Prof.",name:"Aswini",middleName:"Kumar",surname:"Kar",slug:"aswini-kar",fullName:"Aswini Kar",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/252743/images/10381_n.jpg",biography:"uploaded in cv",institutionString:null,institution:{name:"KIIT University",country:{name:"India"}}},{id:"204256",title:"Dr.",name:"Anil",middleName:"Kumar",surname:"Kumar Sahu",slug:"anil-kumar-sahu",fullName:"Anil Kumar Sahu",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/204256/images/14201_n.jpg",biography:"I have nearly 11 years of research and teaching experience. I have done my master degree from University Institute of Pharmacy, Pt. Ravi Shankar Shukla University, Raipur, Chhattisgarh India. I have published 16 review and research articles in international and national journals and published 4 chapters in IntechOpen, the world’s leading publisher of Open access books. I have presented many papers at national and international conferences. I have received research award from Indian Drug Manufacturers Association in year 2015. My research interest extends from novel lymphatic drug delivery systems, oral delivery system for herbal bioactive to formulation optimization.",institutionString:null,institution:{name:"Chhattisgarh Swami Vivekanand Technical University",country:{name:"India"}}},{id:"253468",title:"Dr.",name:"Mariusz",middleName:null,surname:"Marzec",slug:"mariusz-marzec",fullName:"Mariusz Marzec",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/253468/images/system/253468.png",biography:"An assistant professor at Department of Biomedical Computer Systems, at Institute of Computer Science, Silesian University in Katowice. Scientific interests: computer analysis and processing of images, biomedical images, databases and programming languages. He is an author and co-author of scientific publications covering analysis and processing of biomedical images and development of database systems.",institutionString:"University of Silesia",institution:null},{id:"212432",title:"Prof.",name:"Hadi",middleName:null,surname:"Mohammadi",slug:"hadi-mohammadi",fullName:"Hadi Mohammadi",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/212432/images/system/212432.jpeg",biography:"Dr. Hadi Mohammadi is a biomedical engineer with hands-on experience in the design and development of many engineering structures and medical devices through various projects that he has been involved in over the past twenty years. Dr. Mohammadi received his BSc. and MSc. degrees in Mechanical Engineering from Sharif University of Technology, Tehran, Iran, and his PhD. degree in Biomedical Engineering (biomaterials) from the University of Western Ontario. He was a postdoctoral trainee for almost four years at University of Calgary and Harvard Medical School. He is an industry innovator having created the technology to produce lifelike synthetic platforms that can be used for the simulation of almost all cardiovascular reconstructive surgeries. He’s been heavily involved in the design and development of cardiovascular devices and technology for the past 10 years. He is currently an Assistant Professor with the University of British Colombia, Canada.",institutionString:"University of British Columbia",institution:{name:"University of British Columbia",country:{name:"Canada"}}},{id:"254463",title:"Prof.",name:"Haisheng",middleName:null,surname:"Yang",slug:"haisheng-yang",fullName:"Haisheng Yang",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/254463/images/system/254463.jpeg",biography:"Haisheng Yang, Ph.D., Professor and Director of the Department of Biomedical Engineering, College of Life Science and Bioengineering, Beijing University of Technology. He received his Ph.D. degree in Mechanics/Biomechanics from Harbin Institute of Technology (jointly with University of California, Berkeley). Afterwards, he worked as a Postdoctoral Research Associate in the Purdue Musculoskeletal Biology and Mechanics Lab at the Department of Basic Medical Sciences, Purdue University, USA. He also conducted research in the Research Centre of Shriners Hospitals for Children-Canada at McGill University, Canada. Dr. Yang has over 10 years research experience in orthopaedic biomechanics and mechanobiology of bone adaptation and regeneration. He earned an award from Beijing Overseas Talents Aggregation program in 2017 and serves as Beijing Distinguished Professor.",institutionString:"Beijing University of Technology",institution:null},{id:"255757",title:"Dr.",name:"Igor",middleName:"Victorovich",surname:"Lakhno",slug:"igor-lakhno",fullName:"Igor Lakhno",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/255757/images/system/255757.jpg",biography:"Lakhno Igor Victorovich was born in 1971 in Kharkiv (Ukraine). \nMD – 1994, Kharkiv National Medical Univesity.\nOb&Gyn; – 1997, master courses in Kharkiv Medical Academy of Postgraduate Education.\nPhD – 1999, Kharkiv National Medical Univesity.\nDSc – 2019, PL Shupik National Academy of Postgraduate Education \nLakhno Igor has been graduated from an international training courses on reproductive medicine and family planning held in Debrecen University (Hungary) in 1997. Since 1998 Lakhno Igor has worked as an associate professor of the department of obstetrics and gynecology of VN Karazin National University and an associate professor of the perinatology, obstetrics and gynecology department of Kharkiv Medical Academy of Postgraduate Education. Since June 2019 he’s a professor of the department of obstetrics and gynecology of VN Karazin National University and a professor of the perinatology, obstetrics and gynecology department of Kharkiv Medical Academy of Postgraduate Education . He’s an author of about 200 printed works and there are 17 of them in Scopus or Web of Science databases. Lakhno Igor is a rewiever of Journal of Obstetrics and Gynaecology (Taylor and Francis), Informatics in Medicine Unlocked (Elsevier), The Journal of Obstetrics and Gynecology Research (Wiley), Endocrine, Metabolic & Immune Disorders-Drug Targets (Bentham Open), The Open Biomedical Engineering Journal (Bentham Open), etc. He’s defended a dissertation for DSc degree \\'Pre-eclampsia: prediction, prevention and treatment”. Lakhno Igor has participated as a speaker in several international conferences and congresses (International Conference on Biological Oscillations April 10th-14th 2016, Lancaster, UK, The 9th conference of the European Study Group on Cardiovascular Oscillations). His main scientific interests: obstetrics, women’s health, fetal medicine, cardiovascular medicine.",institutionString:"V.N. Karazin Kharkiv National University",institution:{name:"Kharkiv Medical Academy of Postgraduate Education",country:{name:"Ukraine"}}},{id:"89721",title:"Dr.",name:"Mehmet",middleName:"Cuneyt",surname:"Ozmen",slug:"mehmet-ozmen",fullName:"Mehmet Ozmen",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/89721/images/7289_n.jpg",biography:null,institutionString:null,institution:{name:"Gazi University",country:{name:"Turkey"}}},{id:"243698",title:"M.D.",name:"Xiaogang",middleName:null,surname:"Wang",slug:"xiaogang-wang",fullName:"Xiaogang Wang",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/243698/images/system/243698.png",biography:"Dr. Xiaogang Wang, a faculty member of Shanxi Eye Hospital specializing in the treatment of cataract and retinal disease and a tutor for postgraduate students of Shanxi Medical University, worked in the COOL Lab as an international visiting scholar under the supervision of Dr. David Huang and Yali Jia from October 2012 through November 2013. Dr. Wang earned an MD from Shanxi Medical University and a Ph.D. from Shanghai Jiao Tong University. Dr. Wang was awarded two research project grants focused on multimodal optical coherence tomography imaging and deep learning in cataract and retinal disease, from the National Natural Science Foundation of China. He has published around 30 peer-reviewed journal papers and four book chapters and co-edited one book.",institutionString:"Shanxi Eye Hospital",institution:{name:"Shanxi Eye Hospital",country:{name:"China"}}},{id:"242893",title:"Ph.D. Student",name:"Joaquim",middleName:null,surname:"De Moura",slug:"joaquim-de-moura",fullName:"Joaquim De Moura",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/242893/images/7133_n.jpg",biography:"Joaquim de Moura received his degree in Computer Engineering in 2014 from the University of A Coruña (Spain). In 2016, he received his M.Sc degree in Computer Engineering from the same university. He is currently pursuing his Ph.D degree in Computer Science in a collaborative project between ophthalmology centers in Galicia and the University of A Coruña. His research interests include computer vision, machine learning algorithms and analysis and medical imaging processing of various kinds.",institutionString:null,institution:{name:"University of A Coruña",country:{name:"Spain"}}},{id:"267434",title:"Dr.",name:"Rohit",middleName:null,surname:"Raja",slug:"rohit-raja",fullName:"Rohit Raja",position:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRZkkQAG/Profile_Picture_2022-05-09T12:55:18.jpg",biography:null,institutionString:null,institution:null},{id:"294334",title:"B.Sc.",name:"Marc",middleName:null,surname:"Bruggeman",slug:"marc-bruggeman",fullName:"Marc Bruggeman",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/294334/images/8242_n.jpg",biography:"Chemical engineer graduate, with a passion for material science and specific interest in polymers - their near infinite applications intrigue me. \n\nI plan to continue my scientific career in the field of polymeric biomaterials as I am fascinated by intelligent, bioactive and biomimetic materials for use in both consumer and medical applications.",institutionString:null,institution:null},{id:"244950",title:"Dr.",name:"Salvatore",middleName:null,surname:"Di Lauro",slug:"salvatore-di-lauro",fullName:"Salvatore Di Lauro",position:null,profilePictureURL:"https://intech-files.s3.amazonaws.com/0030O00002bSF1HQAW/ProfilePicture%202021-12-20%2014%3A54%3A14.482",biography:"Name:\n\tSALVATORE DI LAURO\nAddress:\n\tHospital Clínico Universitario Valladolid\nAvda Ramón y Cajal 3\n47005, Valladolid\nSpain\nPhone number: \nFax\nE-mail:\n\t+34 983420000 ext 292\n+34 983420084\nsadilauro@live.it\nDate and place of Birth:\nID Number\nMedical Licence \nLanguages\t09-05-1985. Villaricca (Italy)\n\nY1281863H\n474707061\nItalian (native language)\nSpanish (read, written, spoken)\nEnglish (read, written, spoken)\nPortuguese (read, spoken)\nFrench (read)\n\t\t\nCurrent position (title and company)\tDate (Year)\nVitreo-Retinal consultant in ophthalmology. Hospital Clinico Universitario Valladolid. Sacyl. National Health System.\nVitreo-Retinal consultant in ophthalmology. Instituto Oftalmologico Recoletas. Red Hospitalaria Recoletas. Private practise.\t2017-today\n\n2019-today\n\t\n\t\nEducation (High school, university and postgraduate training > 3 months)\tDate (Year)\nDegree in Medicine and Surgery. University of Neaples 'Federico II”\nResident in Opthalmology. Hospital Clinico Universitario Valladolid\nMaster in Vitreo-Retina. IOBA. University of Valladolid\nFellow of the European Board of Ophthalmology. Paris\nMaster in Research in Ophthalmology. University of Valladolid\t2003-2009\n2012-2016\n2016-2017\n2016\n2012-2013\n\t\nEmployments (company and positions)\tDate (Year)\nResident in Ophthalmology. Hospital Clinico Universitario Valladolid. Sacyl.\nFellow in Vitreo-Retina. IOBA. University of Valladolid\nVitreo-Retinal consultant in ophthalmology. Hospital Clinico Universitario Valladolid. Sacyl. National Health System.\nVitreo-Retinal consultant in ophthalmology. Instituto Oftalmologico Recoletas. Red Hospitalaria Recoletas. \n\t2012-2016\n2016-2017\n2017-today\n\n2019-Today\n\n\n\t\nClinical Research Experience (tasks and role)\tDate (Year)\nAssociated investigator\n\n' FIS PI20/00740: DESARROLLO DE UNA CALCULADORA DE RIESGO DE\nAPARICION DE RETINOPATIA DIABETICA BASADA EN TECNICAS DE IMAGEN MULTIMODAL EN PACIENTES DIABETICOS TIPO 1. Grant by: Ministerio de Ciencia e Innovacion \n\n' (BIO/VA23/14) Estudio clínico multicéntrico y prospectivo para validar dos\nbiomarcadores ubicados en los genes p53 y MDM2 en la predicción de los resultados funcionales de la cirugía del desprendimiento de retina regmatógeno. Grant by: Gerencia Regional de Salud de la Junta de Castilla y León.\n' Estudio multicéntrico, aleatorizado, con enmascaramiento doble, en 2 grupos\nparalelos y de 52 semanas de duración para comparar la eficacia, seguridad e inmunogenicidad de SOK583A1 respecto a Eylea® en pacientes con degeneración macular neovascular asociada a la edad' (CSOK583A12301; N.EUDRA: 2019-004838-41; FASE III). Grant by Hexal AG\n\n' Estudio de fase III, aleatorizado, doble ciego, con grupos paralelos, multicéntrico para comparar la eficacia y la seguridad de QL1205 frente a Lucentis® en pacientes con degeneración macular neovascular asociada a la edad. (EUDRACT: 2018-004486-13). Grant by Qilu Pharmaceutical Co\n\n' Estudio NEUTON: Ensayo clinico en fase IV para evaluar la eficacia de aflibercept en pacientes Naive con Edema MacUlar secundario a Oclusion de Vena CenTral de la Retina (OVCR) en regimen de tratamientO iNdividualizado Treat and Extend (TAE)”, (2014-000975-21). Grant by Fundacion Retinaplus\n\n' Evaluación de la seguridad y bioactividad de anillos de tensión capsular en conejo. Proyecto Procusens. Grant by AJL, S.A.\n\n'Estudio epidemiológico, prospectivo, multicéntrico y abierto\\npara valorar la frecuencia de la conjuntivitis adenovírica diagnosticada mediante el test AdenoPlus®\\nTest en pacientes enfermos de conjuntivitis aguda”\\n. National, multicenter study. Grant by: NICOX.\n\nEuropean multicentric trial: 'Evaluation of clinical outcomes following the use of Systane Hydration in patients with dry eye”. Study Phase 4. Grant by: Alcon Labs'\n\nVLPs Injection and Activation in a Rabbit Model of Uveal Melanoma. Grant by Aura Bioscience\n\nUpdating and characterization of a rabbit model of uveal melanoma. Grant by Aura Bioscience\n\nEnsayo clínico en fase IV para evaluar las variantes genéticas de la vía del VEGF como biomarcadores de eficacia del tratamiento con aflibercept en pacientes con degeneración macular asociada a la edad (DMAE) neovascular. Estudio BIOIMAGE. IMO-AFLI-2013-01\n\nEstudio In-Eye:Ensayo clínico en fase IV, abierto, aleatorizado, de 2 brazos,\nmulticçentrico y de 12 meses de duración, para evaluar la eficacia y seguridad de un régimen de PRN flexible individualizado de 'esperar y extender' versus un régimen PRN según criterios de estabilización mediante evaluaciones mensuales de inyecciones intravítreas de ranibizumab 0,5 mg en pacientes naive con neovascularización coriodea secunaria a la degeneración macular relacionada con la edad. CP: CRFB002AES03T\n\nTREND: Estudio Fase IIIb multicéntrico, randomizado, de 12 meses de\nseguimiento con evaluador de la agudeza visual enmascarado, para evaluar la eficacia y la seguridad de ranibizumab 0.5mg en un régimen de tratar y extender comparado con un régimen mensual, en pacientes con degeneración macular neovascular asociada a la edad. CP: CRFB002A2411 Código Eudra CT:\n2013-002626-23\n\n\n\nPublications\t\n\n2021\n\n\n\n\n2015\n\n\n\n\n2021\n\n\n\n\n\n2021\n\n\n\n\n2015\n\n\n\n\n2015\n\n\n2014\n\n\n\n\n2015-16\n\n\n\n2015\n\n\n2014\n\n\n2014\n\n\n\n\n2014\n\n\n\n\n\n\n\n2014\n\nJose Carlos Pastor; Jimena Rojas; Salvador Pastor-Idoate; Salvatore Di Lauro; Lucia Gonzalez-Buendia; Santiago Delgado-Tirado. Proliferative vitreoretinopathy: A new concept of disease pathogenesis and practical\nconsequences. Progress in Retinal and Eye Research. 51, pp. 125 - 155. 03/2016. DOI: 10.1016/j.preteyeres.2015.07.005\n\n\nLabrador-Velandia S; Alonso-Alonso ML; Di Lauro S; García-Gutierrez MT; Srivastava GK; Pastor JC; Fernandez-Bueno I. Mesenchymal stem cells provide paracrine neuroprotective resources that delay degeneration of co-cultured organotypic neuroretinal cultures.Experimental Eye Research. 185, 17/05/2019. DOI: 10.1016/j.exer.2019.05.011\n\nSalvatore Di Lauro; Maria Teresa Garcia Gutierrez; Ivan Fernandez Bueno. Quantification of pigment epithelium-derived factor (PEDF) in an ex vivo coculture of retinal pigment epithelium cells and neuroretina.\nJournal of Allbiosolution. 2019. ISSN 2605-3535\n\nSonia Labrador Velandia; Salvatore Di Lauro; Alonso-Alonso ML; Tabera Bartolomé S; Srivastava GK; Pastor JC; Fernandez-Bueno I. Biocompatibility of intravitreal injection of human mesenchymal stem cells in immunocompetent rabbits. Graefe's archive for clinical and experimental ophthalmology. 256 - 1, pp. 125 - 134. 01/2018. DOI: 10.1007/s00417-017-3842-3\n\n\nSalvatore Di Lauro, David Rodriguez-Crespo, Manuel J Gayoso, Maria T Garcia-Gutierrez, J Carlos Pastor, Girish K Srivastava, Ivan Fernandez-Bueno. A novel coculture model of porcine central neuroretina explants and retinal pigment epithelium cells. Molecular Vision. 2016 - 22, pp. 243 - 253. 01/2016.\n\nSalvatore Di Lauro. Classifications for Proliferative Vitreoretinopathy ({PVR}): An Analysis of Their Use in Publications over the Last 15 Years. Journal of Ophthalmology. 2016, pp. 1 - 6. 01/2016. DOI: 10.1155/2016/7807596\n\nSalvatore Di Lauro; Rosa Maria Coco; Rosa Maria Sanabria; Enrique Rodriguez de la Rua; Jose Carlos Pastor. Loss of Visual Acuity after Successful Surgery for Macula-On Rhegmatogenous Retinal Detachment in a Prospective Multicentre Study. Journal of Ophthalmology. 2015:821864, 2015. DOI: 10.1155/2015/821864\n\nIvan Fernandez-Bueno; Salvatore Di Lauro; Ivan Alvarez; Jose Carlos Lopez; Maria Teresa Garcia-Gutierrez; Itziar Fernandez; Eva Larra; Jose Carlos Pastor. Safety and Biocompatibility of a New High-Density Polyethylene-Based\nSpherical Integrated Porous Orbital Implant: An Experimental Study in Rabbits. Journal of Ophthalmology. 2015:904096, 2015. DOI: 10.1155/2015/904096\n\nPastor JC; Pastor-Idoate S; Rodríguez-Hernandez I; Rojas J; Fernandez I; Gonzalez-Buendia L; Di Lauro S; Gonzalez-Sarmiento R. Genetics of PVR and RD. Ophthalmologica. 232 - Suppl 1, pp. 28 - 29. 2014\n\nRodriguez-Crespo D; Di Lauro S; Singh AK; Garcia-Gutierrez MT; Garrosa M; Pastor JC; Fernandez-Bueno I; Srivastava GK. Triple-layered mixed co-culture model of RPE cells with neuroretina for evaluating the neuroprotective effects of adipose-MSCs. Cell Tissue Res. 358 - 3, pp. 705 - 716. 2014.\nDOI: 10.1007/s00441-014-1987-5\n\nCarlo De Werra; Salvatore Condurro; Salvatore Tramontano; Mario Perone; Ivana Donzelli; Salvatore Di Lauro; Massimo Di Giuseppe; Rosa Di Micco; Annalisa Pascariello; Antonio Pastore; Giorgio Diamantis; Giuseppe Galloro. Hydatid disease of the liver: thirty years of surgical experience.Chirurgia italiana. 59 - 5, pp. 611 - 636.\n(Italia): 2007. ISSN 0009-4773\n\nChapters in books\n\t\n' Salvador Pastor Idoate; Salvatore Di Lauro; Jose Carlos Pastor Jimeno. PVR: Pathogenesis, Histopathology and Classification. Proliferative Vitreoretinopathy with Small Gauge Vitrectomy. Springer, 2018. ISBN 978-3-319-78445-8\nDOI: 10.1007/978-3-319-78446-5_2. \n\n' Salvatore Di Lauro; Maria Isabel Lopez Galvez. Quistes vítreos en una mujer joven. Problemas diagnósticos en patología retinocoroidea. Sociedad Española de Retina-Vitreo. 2018.\n\n' Salvatore Di Lauro; Salvador Pastor Idoate; Jose Carlos Pastor Jimeno. iOCT in PVR management. OCT Applications in Opthalmology. pp. 1 - 8. INTECH, 2018. DOI: 10.5772/intechopen.78774.\n\n' Rosa Coco Martin; Salvatore Di Lauro; Salvador Pastor Idoate; Jose Carlos Pastor. amponadores, manipuladores y tinciones en la cirugía del traumatismo ocular.Trauma Ocular. Ponencia de la SEO 2018..\n\n' LOPEZ GALVEZ; DI LAURO; CRESPO. OCT angiografia y complicaciones retinianas de la diabetes. PONENCIA SEO 2021, CAPITULO 20. (España): 2021.\n\n' Múltiples desprendimientos neurosensoriales bilaterales en paciente joven. Enfermedades Degenerativas De Retina Y Coroides. SERV 04/2016. \n' González-Buendía L; Di Lauro S; Pastor-Idoate S; Pastor Jimeno JC. Vitreorretinopatía proliferante (VRP) e inflamación: LA INFLAMACIÓN in «INMUNOMODULADORES Y ANTIINFLAMATORIOS: MÁS ALLÁ DE LOS CORTICOIDES. RELACION DE PONENCIAS DE LA SOCIEDAD ESPAÑOLA DE OFTALMOLOGIA. 10/2014.",institutionString:null,institution:null},{id:"265335",title:"Mr.",name:"Stefan",middleName:"Radnev",surname:"Stefanov",slug:"stefan-stefanov",fullName:"Stefan Stefanov",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/265335/images/7562_n.jpg",biography:null,institutionString:null,institution:null},{id:"318905",title:"Prof.",name:"Elvis",middleName:"Kwason",surname:"Tiburu",slug:"elvis-tiburu",fullName:"Elvis Tiburu",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Ghana",country:{name:"Ghana"}}},{id:"336193",title:"Dr.",name:"Abdullah",middleName:null,surname:"Alamoudi",slug:"abdullah-alamoudi",fullName:"Abdullah Alamoudi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Majmaah University",country:{name:"Saudi Arabia"}}},{id:"318657",title:"MSc.",name:"Isabell",middleName:null,surname:"Steuding",slug:"isabell-steuding",fullName:"Isabell Steuding",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Harz University of Applied Sciences",country:{name:"Germany"}}},{id:"318656",title:"BSc.",name:"Peter",middleName:null,surname:"Kußmann",slug:"peter-kussmann",fullName:"Peter Kußmann",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Harz University of Applied Sciences",country:{name:"Germany"}}},{id:"338222",title:"Mrs.",name:"María José",middleName:null,surname:"Lucía Mudas",slug:"maria-jose-lucia-mudas",fullName:"María José Lucía Mudas",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Carlos III University of Madrid",country:{name:"Spain"}}},{id:"147824",title:"Mr.",name:"Pablo",middleName:null,surname:"Revuelta Sanz",slug:"pablo-revuelta-sanz",fullName:"Pablo Revuelta Sanz",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Carlos III University of Madrid",country:{name:"Spain"}}}]}},subseries:{item:{id:"95",type:"subseries",title:"Urban Planning and Environmental Management",keywords:"Circular economy, Contingency planning and response to disasters, Ecosystem services, Integrated urban water management, Nature-based solutions, Sustainable urban development, Urban green spaces",scope:"