Chapters authored
Modeling of a Contact-Less Electric-Vehicle Battery-Charging Station Fed from On-Grid Photovoltic Arrays
Electric vehicles (EVs) are environmental friendly due to no exhaust gases or carbon dioxide. In addition, there is no noise through operation. However, up to now, there are some challenges that facing its spread through all over the world. The main problem that these vehicles face is the fast charging process of the used batteries through neat and clean source without plugs. So, this chapter deals with a proposed method for a contactless battery charger of both electric and hybrid electric vehicles (HEVs) from renewable resources. The chapter proposes a public station for fast charging. This station implies off-board battery charger fed from on-grid (OG) photovoltaic (PV) arrays through inductively power transfer (IPT). This comfortable 100 kW contactless power station is designed, modeled, and simulated as a general software package reliable to be used for any other station design. The air gap of the air-core transformer (ACT) divides the station into two parts. The first part implies roof-mounted PV array with its intelligent-controlled maximum power point tracking (MPPT) technique, power converter, three-level power inverter, and resonant compensator converter that operates at high frequency. The second one includes rectifiers and switched mode power converter with smart controller. The chapter includes samples for simulation results that are obtained from the Matlab software package.
Part of the book: Energy Storage Devices