Classification of skin grafts.
\\n\\n
More than half of the publishers listed alongside IntechOpen (18 out of 30) are Social Science and Humanities publishers. IntechOpen is an exception to this as a leader in not only Open Access content but Open Access content across all scientific disciplines, including Physical Sciences, Engineering and Technology, Health Sciences, Life Science, and Social Sciences and Humanities.
\\n\\nOur breakdown of titles published demonstrates this with 47% PET, 31% HS, 18% LS, and 4% SSH books published.
\\n\\n“Even though ItechOpen has shown the potential of sci-tech books using an OA approach,” other publishers “have shown little interest in OA books.”
\\n\\nAdditionally, each book published by IntechOpen contains original content and research findings.
\\n\\nWe are honored to be among such prestigious publishers and we hope to continue to spearhead that growth in our quest to promote Open Access as a true pioneer in OA book publishing.
\\n\\n\\n\\n
\\n"}]',published:!0,mainMedia:{caption:"IntechOpen Maintains",originalUrl:"/media/original/113"}},components:[{type:"htmlEditorComponent",content:'
Simba Information has released its Open Access Book Publishing 2020 - 2024 report and has again identified IntechOpen as the world’s largest Open Access book publisher by title count.
\n\nSimba Information is a leading provider for market intelligence and forecasts in the media and publishing industry. The report, published every year, provides an overview and financial outlook for the global professional e-book publishing market.
\n\nIntechOpen, De Gruyter, and Frontiers are the largest OA book publishers by title count, with IntechOpen coming in at first place with 5,101 OA books published, a good 1,782 titles ahead of the nearest competitor.
\n\nSince the first Open Access Book Publishing report published in 2016, IntechOpen has held the top stop each year.
\n\n\n\nMore than half of the publishers listed alongside IntechOpen (18 out of 30) are Social Science and Humanities publishers. IntechOpen is an exception to this as a leader in not only Open Access content but Open Access content across all scientific disciplines, including Physical Sciences, Engineering and Technology, Health Sciences, Life Science, and Social Sciences and Humanities.
\n\nOur breakdown of titles published demonstrates this with 47% PET, 31% HS, 18% LS, and 4% SSH books published.
\n\n“Even though ItechOpen has shown the potential of sci-tech books using an OA approach,” other publishers “have shown little interest in OA books.”
\n\nAdditionally, each book published by IntechOpen contains original content and research findings.
\n\nWe are honored to be among such prestigious publishers and we hope to continue to spearhead that growth in our quest to promote Open Access as a true pioneer in OA book publishing.
\n\n\n\n
\n'}],latestNews:[{slug:"webinar-introduction-to-open-science-wednesday-18-may-1-pm-cest-20220518",title:"Webinar: Introduction to Open Science | Wednesday 18 May, 1 PM CEST"},{slug:"step-in-the-right-direction-intechopen-launches-a-portfolio-of-open-science-journals-20220414",title:"Step in the Right Direction: IntechOpen Launches a Portfolio of Open Science Journals"},{slug:"let-s-meet-at-london-book-fair-5-7-april-2022-olympia-london-20220321",title:"Let’s meet at London Book Fair, 5-7 April 2022, Olympia London"},{slug:"50-books-published-as-part-of-intechopen-and-knowledge-unlatched-ku-collaboration-20220316",title:"50 Books published as part of IntechOpen and Knowledge Unlatched (KU) Collaboration"},{slug:"intechopen-joins-the-united-nations-sustainable-development-goals-publishers-compact-20221702",title:"IntechOpen joins the United Nations Sustainable Development Goals Publishers Compact"},{slug:"intechopen-signs-exclusive-representation-agreement-with-lsr-libros-servicios-y-representaciones-s-a-de-c-v-20211123",title:"IntechOpen Signs Exclusive Representation Agreement with LSR Libros Servicios y Representaciones S.A. de C.V"},{slug:"intechopen-expands-partnership-with-research4life-20211110",title:"IntechOpen Expands Partnership with Research4Life"},{slug:"introducing-intechopen-book-series-a-new-publishing-format-for-oa-books-20210915",title:"Introducing IntechOpen Book Series - A New Publishing Format for OA Books"}]},book:{item:{type:"book",id:"1654",leadTitle:null,fullTitle:"Hydrodynamics - Theory and Model",title:"Hydrodynamics",subtitle:"Theory and Model",reviewType:"peer-reviewed",abstract:"With the amazing advances of scientific research, Hydrodynamics - Theory and Application presents the engineering applications of hydrodynamics from many countries around the world. A wide range of topics are covered in this book, including the theoretical, experimental, and numerical investigations on various subjects related to hydrodynamic problems. The book consists of twelve chapters, each of which is edited separately and deals with a specific topic. The book is intended to be a useful reference to the readers who are working in this field.",isbn:null,printIsbn:"978-953-51-0130-7",pdfIsbn:"978-953-51-4963-7",doi:"10.5772/2114",price:139,priceEur:155,priceUsd:179,slug:"hydrodynamics-theory-and-model",numberOfPages:320,isOpenForSubmission:!1,isInWos:1,isInBkci:!1,hash:"6f35be6d05e82cf5777223a86ff6e4ca",bookSignature:"Jinhai Zheng",publishedDate:"March 14th 2012",coverURL:"https://cdn.intechopen.com/books/images_new/1654.jpg",numberOfDownloads:45973,numberOfWosCitations:25,numberOfCrossrefCitations:9,numberOfCrossrefCitationsByBook:0,numberOfDimensionsCitations:33,numberOfDimensionsCitationsByBook:0,hasAltmetrics:1,numberOfTotalCitations:67,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"May 4th 2011",dateEndSecondStepPublish:"June 1st 2011",dateEndThirdStepPublish:"October 6th 2011",dateEndFourthStepPublish:"November 5th 2011",dateEndFifthStepPublish:"March 4th 2012",currentStepOfPublishingProcess:5,indexedIn:"1,2,3,4,5,6,7",editedByType:"Edited by",kuFlag:!1,featuredMarkup:null,editors:[{id:"105318",title:"Dr.",name:"Jin - Hai",middleName:null,surname:"Zheng",slug:"jin-hai-zheng",fullName:"Jin - Hai Zheng",profilePictureURL:"https://mts.intechopen.com/storage/users/105318/images/system/105318.jpg",biography:"Jinhai Zheng received his Doctoral Degree in Coastal Engineering from Hohai University of China in 1998. He has been Chair Professor of Harbor, Waterway, Coastal, and Offshore Engineering in the same University since 2007. His research interests cover estuarine and coastal processes, harbor and waterway engineering, coastal engineering, and environment. He carries out numerical and experimental studies that have dealt with characteristics of water wave, tidal flow, and sediment transport and their responses to engineering projects in the Yangtze River Estuary, the Pearl River Delta, the Min River Estuary, and along the southeast coasts in China. An author of about 100 academic publications, he is one of the main members engaged in the preparation and translation of General Rules for Design of Port and Waterway Works, a standard code of practice of China. He is actively involved in several international and domestic professional societies, such as the IAHR, the Chinese Ocean Engineering Society, and the China Water Transportation Construction Association.",institutionString:null,position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"1",totalChapterViews:"0",totalEditedBooks:"1",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"1216",title:"Hydraulics",slug:"physics-fluid-mechanics-hydraulics"}],chapters:[{id:"31449",title:"Hydrodynamics of Dual Fluidized Beds",doi:"10.5772/37503",slug:"hydrodynamics-of-dual-fluidized-beds",totalDownloads:3689,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"M.K. Karmakar and P.K. Chatterjee",downloadPdfUrl:"/chapter/pdf-download/31449",previewPdfUrl:"/chapter/pdf-preview/31449",authors:[{id:"113012",title:"Dr",name:null,surname:"Karmakar",slug:"karmakar",fullName:"Karmakar"}],corrections:null},{id:"31450",title:"Hydraulics of Sediment Transport",doi:"10.5772/25982",slug:"hydraulics-of-sediment-transport",totalDownloads:10639,totalCrossrefCites:2,totalDimensionsCites:6,hasAltmetrics:1,abstract:null,signatures:"Yousef Hassanzadeh",downloadPdfUrl:"/chapter/pdf-download/31450",previewPdfUrl:"/chapter/pdf-preview/31450",authors:[{id:"65181",title:"Prof.",name:"Yousef",surname:"Hassanzadeh",slug:"yousef-hassanzadeh",fullName:"Yousef Hassanzadeh"}],corrections:null},{id:"31451",title:"Study on the Interaction Between Tsunami Bore and Cylindrical Structure with Weir",doi:"10.5772/37032",slug:"study-on-the-interaction-between-tsunami-bore-and-cylindrical-structure-with-weir",totalDownloads:3099,totalCrossrefCites:0,totalDimensionsCites:4,hasAltmetrics:0,abstract:null,signatures:"I. Wijatmiko and K. Murakami",downloadPdfUrl:"/chapter/pdf-download/31451",previewPdfUrl:"/chapter/pdf-preview/31451",authors:[{id:"110934",title:"Dr.",name:"Indradi",surname:"Wijatmiko",slug:"indradi-wijatmiko",fullName:"Indradi Wijatmiko"},{id:"110938",title:"Prof.",name:"Keisuke",surname:"Murakami",slug:"keisuke-murakami",fullName:"Keisuke Murakami"}],corrections:null},{id:"31452",title:"Using the General Gamma Distribution to Represent the Droplet Size Distribution in a Spray Model",doi:"10.5772/34682",slug:"using-the-general-gamma-distribution-to-represent-the-droplet-size-distribution-in-a-spray-model",totalDownloads:4418,totalCrossrefCites:0,totalDimensionsCites:2,hasAltmetrics:0,abstract:null,signatures:"Nwabueze G. Emekwuru",downloadPdfUrl:"/chapter/pdf-download/31452",previewPdfUrl:"/chapter/pdf-preview/31452",authors:[{id:"101206",title:"Dr.",name:"Nwabueze",surname:"Emekwuru",slug:"nwabueze-emekwuru",fullName:"Nwabueze Emekwuru"}],corrections:null},{id:"31453",title:"Well Responses in Three-Zone Linear Composite Dual-Porosity Reservoirs",doi:"10.5772/36122",slug:"well-responses-in-three-zone-linear-composite-dual-porosity-reservoirs",totalDownloads:3032,totalCrossrefCites:1,totalDimensionsCites:2,hasAltmetrics:0,abstract:null,signatures:"Jing-Jing Guo, Lie-Hui Zhang, Hai-Tao Wang and Qi-Guo Liu",downloadPdfUrl:"/chapter/pdf-download/31453",previewPdfUrl:"/chapter/pdf-preview/31453",authors:[{id:"107148",title:"Prof.",name:"Liehui",surname:"Zhang",slug:"liehui-zhang",fullName:"Liehui Zhang"},{id:"112948",title:"Dr.",name:"Jingjing",surname:"Guo",slug:"jingjing-guo",fullName:"Jingjing Guo"},{id:"112950",title:"Prof.",name:"Qiguo",surname:"Liu",slug:"qiguo-liu",fullName:"Qiguo Liu"},{id:"138343",title:"Dr.",name:"Haitao",surname:"Wang",slug:"haitao-wang",fullName:"Haitao Wang"}],corrections:null},{id:"31454",title:"Thermo-Hydrodynamics of Internally Heated Molten Salts for Innovative Nuclear Reactors",doi:"10.5772/35924",slug:"thermo-hydrodynamics-of-internally-heated-molten-salts-for-innovative-nuclear-reactors",totalDownloads:2877,totalCrossrefCites:2,totalDimensionsCites:10,hasAltmetrics:0,abstract:null,signatures:"Lelio Luzzi, Manuele Aufiero, Antonio Cammi and Carlo Fiorina",downloadPdfUrl:"/chapter/pdf-download/31454",previewPdfUrl:"/chapter/pdf-preview/31454",authors:[{id:"39676",title:"Dr.",name:"Antonio",surname:"Cammi",slug:"antonio-cammi",fullName:"Antonio Cammi"},{id:"39677",title:"Dr.",name:"Lelio",surname:"Luzzi",slug:"lelio-luzzi",fullName:"Lelio Luzzi"},{id:"111425",title:"MSc.",name:"Manuele",surname:"Aufiero",slug:"manuele-aufiero",fullName:"Manuele Aufiero"},{id:"111566",title:"MSc.",name:"Carlo",surname:"Fiorina",slug:"carlo-fiorina",fullName:"Carlo Fiorina"}],corrections:null},{id:"31455",title:"Measurement of Multiphase Flow Characteristics Via Image Analysis Techniques: The Fluidization Case Study",doi:"10.5772/28376",slug:"measurement-of-multiphase-flow-characteristics-via-image-analysis-techniques-the-fluidization-case-s",totalDownloads:3123,totalCrossrefCites:0,totalDimensionsCites:1,hasAltmetrics:0,abstract:null,signatures:"Antonio Busciglio, Giuseppa Vella and Giorgio Micale",downloadPdfUrl:"/chapter/pdf-download/31455",previewPdfUrl:"/chapter/pdf-preview/31455",authors:[{id:"73672",title:"Dr.",name:"Giorgio",surname:"Micale",slug:"giorgio-micale",fullName:"Giorgio Micale"},{id:"138673",title:"Dr.",name:"Antonio",surname:"Busciglio",slug:"antonio-busciglio",fullName:"Antonio Busciglio"},{id:"138674",title:"Dr.",name:"Giuseppa",surname:"Vella",slug:"giuseppa-vella",fullName:"Giuseppa Vella"}],corrections:null},{id:"31456",title:"Hydrodynamically Confined Flow Devices",doi:"10.5772/37853",slug:"hydrodynamically-confined-flow-devices",totalDownloads:2471,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"Alar Ainla, Gavin Jeffries and Aldo Jesorka",downloadPdfUrl:"/chapter/pdf-download/31456",previewPdfUrl:"/chapter/pdf-preview/31456",authors:[{id:"114596",title:"Dr",name:null,surname:"Jesorka",slug:"jesorka",fullName:"Jesorka"}],corrections:null},{id:"31457",title:"Actual Problems of Hydrodynamics at Internal Not-Isothermal Flows in Fields of Mass Forces",doi:"10.5772/35551",slug:"actual-problems-of-hydrodynamics-at-internal-not-isothermal-flows-in-fields-of-mass-forces",totalDownloads:2192,totalCrossrefCites:2,totalDimensionsCites:3,hasAltmetrics:0,abstract:null,signatures:"Sergey Kharlamov",downloadPdfUrl:"/chapter/pdf-download/31457",previewPdfUrl:"/chapter/pdf-preview/31457",authors:[{id:"104964",title:"Dr.",name:"Sergey",surname:"Kharlamov",slug:"sergey-kharlamov",fullName:"Sergey Kharlamov"}],corrections:null},{id:"31458",title:"Numerical Wave Flumes Based on Smoothed Particle Hydrodynamics",doi:"10.5772/38174",slug:"numerical-wave-flumes-based-on-smoothed-particle-hydrodynamics",totalDownloads:3266,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,abstract:null,signatures:"Jinhai Zheng, Gang Wang, Chi Zhang and Yingqi Liu",downloadPdfUrl:"/chapter/pdf-download/31458",previewPdfUrl:"/chapter/pdf-preview/31458",authors:[{id:"105318",title:"Dr.",name:"Jin - Hai",surname:"Zheng",slug:"jin-hai-zheng",fullName:"Jin - Hai Zheng"},{id:"117805",title:"Dr.",name:"Gang",surname:"Wang",slug:"gang-wang",fullName:"Gang Wang"},{id:"117808",title:"Dr.",name:"Chi",surname:"Zhang",slug:"chi-zhang",fullName:"Chi Zhang"},{id:"117811",title:"MSc.",name:"Yingqi",surname:"Liu",slug:"yingqi-liu",fullName:"Yingqi Liu"}],corrections:null},{id:"31459",title:"Lattice Boltzmann Simulation for Shallow Water Flow Applications",doi:"10.5772/25463",slug:"lattice-boltzmann-simulation-for-shallow-water-flow-applications",totalDownloads:4123,totalCrossrefCites:1,totalDimensionsCites:3,hasAltmetrics:0,abstract:null,signatures:"Mapundi K. Banda and Mohammed Seaid",downloadPdfUrl:"/chapter/pdf-download/31459",previewPdfUrl:"/chapter/pdf-preview/31459",authors:[{id:"63421",title:"Prof.",name:"Mohammed",surname:"Seaid",slug:"mohammed-seaid",fullName:"Mohammed Seaid"},{id:"79546",title:"Prof.",name:"Mapundi",surname:"Banda",slug:"mapundi-banda",fullName:"Mapundi Banda"}],corrections:null},{id:"31460",title:"The Numerical Simulation of Hydrodynamics of Fishing Net Cage",doi:"10.5772/34780",slug:"the-numerical-simulation-of-hydrodynamics-of-fishing-net-cage",totalDownloads:3044,totalCrossrefCites:1,totalDimensionsCites:2,hasAltmetrics:0,abstract:null,signatures:"Yunpeng Zhao, Tiaojian Xu, Chunwei Bi, Guohai Dong and Shengcong Liu",downloadPdfUrl:"/chapter/pdf-download/31460",previewPdfUrl:"/chapter/pdf-preview/31460",authors:[{id:"80650",title:"Prof.",name:"Guo-Hai",surname:"Dong",slug:"guo-hai-dong",fullName:"Guo-Hai Dong"},{id:"84719",title:"Dr.",name:"Yun-Peng",surname:"Zhao",slug:"yun-peng-zhao",fullName:"Yun-Peng Zhao"},{id:"107177",title:"Dr.",name:"Bi",surname:"Chun-Wei",slug:"bi-chun-wei",fullName:"Bi Chun-Wei"},{id:"107178",title:"Dr.",name:"Tiao- Jian",surname:"Xu",slug:"tiao-jian-xu",fullName:"Tiao- Jian Xu"}],corrections:null}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},subseries:null,tags:null},relatedBooks:[{type:"book",id:"10162",title:"A Diffusion Hydrodynamic Model",subtitle:null,isOpenForSubmission:!1,hash:"a8c90b653db4fa7a59132d39cca185d8",slug:"a-diffusion-hydrodynamic-model",bookSignature:"Theodore V. Hromadka II, Chung-Cheng Yen and Prasada Rao",coverURL:"https://cdn.intechopen.com/books/images_new/10162.jpg",editedByType:"Authored by",editors:[{id:"181008",title:"Dr.",name:"Theodore V.",surname:"Hromadka II",slug:"theodore-v.-hromadka-ii",fullName:"Theodore V. Hromadka II"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"4",chapterContentType:"chapter",authoredCaption:"Authored by"}},{type:"book",id:"8825",title:"Novel, Integrated and Revolutionary Well Test Interpretation and Analysis",subtitle:null,isOpenForSubmission:!1,hash:"6f79f457e509e77d107763010a6d0655",slug:"novel-integrated-and-revolutionary-well-test-interpretation-and-analysis",bookSignature:"Freddy Humberto Escobar Macualo",coverURL:"https://cdn.intechopen.com/books/images_new/8825.jpg",editedByType:"Authored by",editors:[{id:"142270",title:"Dr.",name:"Freddy",surname:"Escobar",slug:"freddy-escobar",fullName:"Freddy Escobar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"3",chapterContentType:"chapter",authoredCaption:"Authored by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophile",surname:"Theophanides",slug:"theophile-theophanides",fullName:"Theophile Theophanides"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"314",title:"Regenerative Medicine and Tissue Engineering",subtitle:"Cells and Biomaterials",isOpenForSubmission:!1,hash:"bb67e80e480c86bb8315458012d65686",slug:"regenerative-medicine-and-tissue-engineering-cells-and-biomaterials",bookSignature:"Daniel Eberli",coverURL:"https://cdn.intechopen.com/books/images_new/314.jpg",editedByType:"Edited by",editors:[{id:"6495",title:"Dr.",name:"Daniel",surname:"Eberli",slug:"daniel-eberli",fullName:"Daniel Eberli"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],ofsBooks:[]},correction:{item:{id:"72959",slug:"erratum-driving-control-technologies-of-new-high-efficient-motors",title:"Erratum - Driving Control Technologies of New High-Efficient Motors",doi:null,correctionPDFUrl:"https://cdn.intechopen.com/pdfs/72959.pdf",downloadPdfUrl:"/chapter/pdf-download/72959",previewPdfUrl:"/chapter/pdf-preview/72959",totalDownloads:null,totalCrossrefCites:null,bibtexUrl:"/chapter/bibtex/72959",risUrl:"/chapter/ris/72959",chapter:{id:"68411",slug:"driving-control-technologies-of-new-high-efficient-motors",signatures:"Chang-Ming Liaw, Min-Ze Lu, Ping-Hong Jhou and Kuan-Yu Chou",dateSubmitted:"April 1st 2019",dateReviewed:"July 2nd 2019",datePrePublished:"August 22nd 2019",datePublished:"March 25th 2020",book:{id:"9290",title:"Applied Electromechanical Devices and Machines for Electric Mobility Solutions",subtitle:null,fullTitle:"Applied Electromechanical Devices and Machines for Electric Mobility Solutions",slug:"applied-electromechanical-devices-and-machines-for-electric-mobility-solutions",publishedDate:"March 25th 2020",bookSignature:"Adel El-Shahat and Mircea Ruba",coverURL:"https://cdn.intechopen.com/books/images_new/9290.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"193331",title:"Dr.",name:"Adel",middleName:null,surname:"El-Shahat",slug:"adel-el-shahat",fullName:"Adel El-Shahat"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"37616",title:"Prof.",name:"Chang-Ming",middleName:null,surname:"Liaw",fullName:"Chang-Ming Liaw",slug:"chang-ming-liaw",email:"cmliaw@ee.nthu.edu.tw",position:null,institution:null},{id:"180324",title:"Dr.",name:"Kai-Wei",middleName:null,surname:"Hu",fullName:"Kai-Wei Hu",slug:"kai-wei-hu",email:"kaiweihu@hotmail.com.tw",position:null,institution:{name:"National Tsing Hua University",institutionURL:null,country:{name:"Taiwan"}}},{id:"308019",title:"MSc.",name:"Jia-Hsiang",middleName:null,surname:"Zhuang",fullName:"Jia-Hsiang Zhuang",slug:"jia-hsiang-zhuang",email:"abc0929352983@yahoo.com.tw",position:null,institution:{name:"National Tsing Hua University",institutionURL:null,country:{name:"Taiwan"}}},{id:"308021",title:"MSc.",name:"Shih-Wei",middleName:null,surname:"Su",fullName:"Shih-Wei Su",slug:"shih-wei-su",email:"nthu18356743@gmail.com",position:null,institution:{name:"National Tsing Hua University",institutionURL:null,country:{name:"Taiwan"}}}]}},chapter:{id:"68411",slug:"driving-control-technologies-of-new-high-efficient-motors",signatures:"Chang-Ming Liaw, Min-Ze Lu, Ping-Hong Jhou and Kuan-Yu Chou",dateSubmitted:"April 1st 2019",dateReviewed:"July 2nd 2019",datePrePublished:"August 22nd 2019",datePublished:"March 25th 2020",book:{id:"9290",title:"Applied Electromechanical Devices and Machines for Electric Mobility Solutions",subtitle:null,fullTitle:"Applied Electromechanical Devices and Machines for Electric Mobility Solutions",slug:"applied-electromechanical-devices-and-machines-for-electric-mobility-solutions",publishedDate:"March 25th 2020",bookSignature:"Adel El-Shahat and Mircea Ruba",coverURL:"https://cdn.intechopen.com/books/images_new/9290.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"193331",title:"Dr.",name:"Adel",middleName:null,surname:"El-Shahat",slug:"adel-el-shahat",fullName:"Adel El-Shahat"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}},authors:[{id:"37616",title:"Prof.",name:"Chang-Ming",middleName:null,surname:"Liaw",fullName:"Chang-Ming Liaw",slug:"chang-ming-liaw",email:"cmliaw@ee.nthu.edu.tw",position:null,institution:null},{id:"180324",title:"Dr.",name:"Kai-Wei",middleName:null,surname:"Hu",fullName:"Kai-Wei Hu",slug:"kai-wei-hu",email:"kaiweihu@hotmail.com.tw",position:null,institution:{name:"National Tsing Hua University",institutionURL:null,country:{name:"Taiwan"}}},{id:"308019",title:"MSc.",name:"Jia-Hsiang",middleName:null,surname:"Zhuang",fullName:"Jia-Hsiang Zhuang",slug:"jia-hsiang-zhuang",email:"abc0929352983@yahoo.com.tw",position:null,institution:{name:"National Tsing Hua University",institutionURL:null,country:{name:"Taiwan"}}},{id:"308021",title:"MSc.",name:"Shih-Wei",middleName:null,surname:"Su",fullName:"Shih-Wei Su",slug:"shih-wei-su",email:"nthu18356743@gmail.com",position:null,institution:{name:"National Tsing Hua University",institutionURL:null,country:{name:"Taiwan"}}}]},book:{id:"9290",title:"Applied Electromechanical Devices and Machines for Electric Mobility Solutions",subtitle:null,fullTitle:"Applied Electromechanical Devices and Machines for Electric Mobility Solutions",slug:"applied-electromechanical-devices-and-machines-for-electric-mobility-solutions",publishedDate:"March 25th 2020",bookSignature:"Adel El-Shahat and Mircea Ruba",coverURL:"https://cdn.intechopen.com/books/images_new/9290.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",editors:[{id:"193331",title:"Dr.",name:"Adel",middleName:null,surname:"El-Shahat",slug:"adel-el-shahat",fullName:"Adel El-Shahat"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"}}},ofsBook:{item:{type:"book",id:"11149",leadTitle:null,title:"Differential Equations",subtitle:null,reviewType:"peer-reviewed",abstract:"
\r\n\tThe scope of this book encompasses theory and applications of differential equations of various types. Differential equations are extremely important, especially nowadays since they are known as a fundamental way of modeling dynamical systems and, thus, their properties such as stability, instability, periodic and chaotic behaviors which are extremely important when studying dynamical systems. The applications have been growing in numbers and include autonomous vehicles (with examples being driverless cars and satellites), robotics, medical surgery, precision agriculture, and smart buildings, to name a few. The complexity and techniques of analyzing behaviors of differential equations depend on whether they are ordinary, linear or nonlinear, infinite-dimensional or stochastic, etc. Another important topic is how to control differential equations to achieve particular properties that they do not possess without any control action. The control designs heavily depend on the type of differential equations as well as different constraints imposed on the control variables as well as on the information available to the controllers.
",isbn:"978-1-80355-943-8",printIsbn:"978-1-80355-942-1",pdfIsbn:"978-1-80355-944-5",doi:null,price:0,priceEur:0,priceUsd:0,slug:null,numberOfPages:0,isOpenForSubmission:!1,isSalesforceBook:!1,hash:"f23ece47540382b74ca6bfb40ad8a638",bookSignature:"Prof. Dusan Stipanovic",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/11149.jpg",keywords:"Pursuit Evasion Games, Nash Equilibria, Multi-Agent Systems, Stability Theory, Infinite Dimensional Systems, Differential Games, Stochastic Processes, Probability Theory, Ito Integrals, Properties, Stability, Control",numberOfDownloads:null,numberOfWosCitations:0,numberOfCrossrefCitations:null,numberOfDimensionsCitations:null,numberOfTotalCitations:null,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"November 12th 2021",dateEndSecondStepPublish:"December 10th 2021",dateEndThirdStepPublish:"February 8th 2022",dateEndFourthStepPublish:"April 29th 2022",dateEndFifthStepPublish:"June 28th 2022",remainingDaysToSecondStep:"5 months",secondStepPassed:!0,currentStepOfPublishingProcess:5,editedByType:null,kuFlag:!1,biosketch:"Dr. Dusan Stipanovic's expertise is in stability and control of differential equations, differential games, and he is a recipient of the 2017 Friedrich Wilhelm Bessel Research Award in the area of mathematics (control theory and calculus of variations). He is a visiting professor in various universities in Serbia (Belgrade and Novi Sad), China, Germany, and the USA (University of California at Berkeley). Currently, he is an Associate Editor for the Journal of Optimization Theory and Applications.",coeditorOneBiosketch:null,coeditorTwoBiosketch:null,coeditorThreeBiosketch:null,coeditorFourBiosketch:null,coeditorFiveBiosketch:null,editors:[{id:"318375",title:"Prof.",name:"Dusan",middleName:null,surname:"Stipanovic",slug:"dusan-stipanovic",fullName:"Dusan Stipanovic",profilePictureURL:"https://mts.intechopen.com/storage/users/318375/images/system/318375.jpg",biography:"Professor Dusan Stipanovic received his B.S. degree in electrical engineering from the University of Belgrade, Belgrade, Serbia in 1994, and the M.S.E.E. and Ph.D. degrees in electrical engineering from Santa Clara University, Santa Clara, California in 1996 and 2000, respectively. Dr. Stipanovic had been an Adjunct Lecturer and Research Associate with the Department of Electrical Engineering at Santa Clara University (1998-2001), and a Research Associate in Professor Claire Tomlin’s Hybrid Systems Laboratory of the Department of Aeronautics and Astronautics at Stanford University (2001-2004). In 2004, he joined the University of Illinois at Urbana-Champaign where he is now Professor in the Controls Group of the Coordinated Science Laboratory and Department of Industrial and Enterprise Systems Engineering. He is a visiting Professor in the School of Electrical Engineering of the University of Belgrade in Serbia, School of Computer Science and Technology or the University of Science and Technology in Hefei, China, Technical School of the University of Novi Sad in Serbia, and in the Robotics and Telematics Department at the University of Würzburg in Germany. He also held visiting faculty positions in the EECS Department at the University of California at Berkeley. His research interests include decentralized control and estimation, stability theory, optimal control, and dynamic games with applications in control of autonomous vehicles, precision agriculture, circuits, and medical robotics. Dr. Stipanovic served as an Associate Editor on the Editorial Boards of the IEEE Transactions on Circuits and Systems I and II. Currently he is an Associate Editor for the Journal of Optimization Theory and Applications.",institutionString:"University of Illinois at Urbana Champaign",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"University of Illinois at Urbana Champaign",institutionURL:null,country:{name:"United States of America"}}}],coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"15",title:"Mathematics",slug:"mathematics"}],chapters:null,productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"429341",firstName:"Paula",lastName:"Gavran",middleName:null,title:"Ms.",imageUrl:"//cdnintech.com/web/frontend/www/assets/author.svg",email:"paula@intechopen.com",biography:null}},relatedBooks:[{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophile",surname:"Theophanides",slug:"theophile-theophanides",fullName:"Theophile Theophanides"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3092",title:"Anopheles mosquitoes",subtitle:"New insights into malaria vectors",isOpenForSubmission:!1,hash:"c9e622485316d5e296288bf24d2b0d64",slug:"anopheles-mosquitoes-new-insights-into-malaria-vectors",bookSignature:"Sylvie Manguin",coverURL:"https://cdn.intechopen.com/books/images_new/3092.jpg",editedByType:"Edited by",editors:[{id:"50017",title:"Prof.",name:"Sylvie",surname:"Manguin",slug:"sylvie-manguin",fullName:"Sylvie Manguin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"371",title:"Abiotic Stress in Plants",subtitle:"Mechanisms and Adaptations",isOpenForSubmission:!1,hash:"588466f487e307619849d72389178a74",slug:"abiotic-stress-in-plants-mechanisms-and-adaptations",bookSignature:"Arun Shanker and B. Venkateswarlu",coverURL:"https://cdn.intechopen.com/books/images_new/371.jpg",editedByType:"Edited by",editors:[{id:"58592",title:"Dr.",name:"Arun",surname:"Shanker",slug:"arun-shanker",fullName:"Arun Shanker"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"314",title:"Regenerative Medicine and Tissue Engineering",subtitle:"Cells and Biomaterials",isOpenForSubmission:!1,hash:"bb67e80e480c86bb8315458012d65686",slug:"regenerative-medicine-and-tissue-engineering-cells-and-biomaterials",bookSignature:"Daniel Eberli",coverURL:"https://cdn.intechopen.com/books/images_new/314.jpg",editedByType:"Edited by",editors:[{id:"6495",title:"Dr.",name:"Daniel",surname:"Eberli",slug:"daniel-eberli",fullName:"Daniel Eberli"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"2270",title:"Fourier Transform",subtitle:"Materials Analysis",isOpenForSubmission:!1,hash:"5e094b066da527193e878e160b4772af",slug:"fourier-transform-materials-analysis",bookSignature:"Salih Mohammed Salih",coverURL:"https://cdn.intechopen.com/books/images_new/2270.jpg",editedByType:"Edited by",editors:[{id:"111691",title:"Dr.Ing.",name:"Salih",surname:"Salih",slug:"salih-salih",fullName:"Salih Salih"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"872",title:"Organic Pollutants Ten Years After the Stockholm Convention",subtitle:"Environmental and Analytical Update",isOpenForSubmission:!1,hash:"f01dc7077e1d23f3d8f5454985cafa0a",slug:"organic-pollutants-ten-years-after-the-stockholm-convention-environmental-and-analytical-update",bookSignature:"Tomasz Puzyn and Aleksandra Mostrag-Szlichtyng",coverURL:"https://cdn.intechopen.com/books/images_new/872.jpg",editedByType:"Edited by",editors:[{id:"84887",title:"Dr.",name:"Tomasz",surname:"Puzyn",slug:"tomasz-puzyn",fullName:"Tomasz Puzyn"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"28864",title:"DART: A 3D Model for Remote Sensing Images and Radiative Budget of Earth Surfaces",doi:"10.5772/31315",slug:"dart-model-remote-sensing-images-radiative-budget-and-energy-budget-of-earth-surfaces",body:null,keywords:null,chapterPDFUrl:"https://cdn.intechopen.com/pdfs/28864.pdf",chapterXML:null,downloadPdfUrl:"/chapter/pdf-download/28864",previewPdfUrl:"/chapter/pdf-preview/28864",totalDownloads:3007,totalViews:247,totalCrossrefCites:17,totalDimensionsCites:33,totalAltmetricsMentions:0,impactScore:12,impactScorePercentile:98,impactScoreQuartile:4,hasAltmetrics:0,dateSubmitted:"March 29th 2011",dateReviewed:"August 30th 2011",datePrePublished:null,datePublished:"March 7th 2012",dateFinished:null,readingETA:"0",abstract:null,reviewType:"peer-reviewed",bibtexUrl:"/chapter/bibtex/28864",risUrl:"/chapter/ris/28864",book:{id:"907",slug:"modeling-and-simulation-in-engineering"},signatures:"J.P. Gastellu-Etchegorry, E. Grau and N. Lauret",authors:[{id:"86588",title:"Prof.",name:"Jean Philippe",middleName:null,surname:"Gastellu-Etchegorry",fullName:"Jean Philippe Gastellu-Etchegorry",slug:"jean-philippe-gastellu-etchegorry",email:"jean-philippe.gastellu@cesbio.cnes.fr",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institution:{name:"Paul Sabatier University",institutionURL:null,country:{name:"France"}}}],sections:null,chapterReferences:null,footnotes:null,contributors:null,corrections:null},book:{id:"907",type:"book",title:"Modeling and Simulation in Engineering",subtitle:null,fullTitle:"Modeling and Simulation in Engineering",slug:"modeling-and-simulation-in-engineering",publishedDate:"March 7th 2012",bookSignature:"Catalin Alexandru",coverURL:"https://cdn.intechopen.com/books/images_new/907.jpg",licenceType:"CC BY 3.0",editedByType:"Edited by",isbn:null,printIsbn:"978-953-51-0012-6",pdfIsbn:"978-953-51-5587-4",reviewType:"peer-reviewed",numberOfWosCitations:68,isAvailableForWebshopOrdering:!0,editors:[{id:"2767",title:"Prof.",name:"Catalin",middleName:null,surname:"Alexandru",slug:"catalin-alexandru",fullName:"Catalin Alexandru"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,coeditorOne:null,coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"559"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"28863",type:"chapter",title:"Image-Laser Fusion for In Situ 3D Modeling of Complex Environments: A 4D Panoramic-Driven Approach",slug:"image-laser-fusion-for-in-situ-3d-modeling-of-complex-environments-a-4d-panoramic-driven-approach",totalDownloads:2386,totalCrossrefCites:0,signatures:"Daniela Craciun, Nicolas Paparoditis and Francis Schmitt",reviewType:"peer-reviewed",authors:[{id:"81687",title:"Dr.",name:"Daniela",middleName:null,surname:"Craciun",fullName:"Daniela Craciun",slug:"daniela-craciun"},{id:"88921",title:"Dr.",name:"Nicolas",middleName:null,surname:"Paparoditis",fullName:"Nicolas Paparoditis",slug:"nicolas-paparoditis"},{id:"88922",title:"Prof.",name:"Francis",middleName:null,surname:"Schmitt",fullName:"Francis Schmitt",slug:"francis-schmitt"}]},{id:"28864",type:"chapter",title:"DART: A 3D Model for Remote Sensing Images and Radiative Budget of Earth Surfaces",slug:"dart-model-remote-sensing-images-radiative-budget-and-energy-budget-of-earth-surfaces",totalDownloads:3007,totalCrossrefCites:17,signatures:"J.P. Gastellu-Etchegorry, E. Grau and N. Lauret",reviewType:"peer-reviewed",authors:[{id:"86588",title:"Prof.",name:"Jean Philippe",middleName:null,surname:"Gastellu-Etchegorry",fullName:"Jean Philippe Gastellu-Etchegorry",slug:"jean-philippe-gastellu-etchegorry"}]},{id:"28865",type:"chapter",title:"3D Modelling from Real Data",slug:"3d-modeling-from-real-data",totalDownloads:3375,totalCrossrefCites:13,signatures:"Gabriele Guidi and Fabio Remondino",reviewType:"peer-reviewed",authors:[{id:"81959",title:"Prof.",name:"Gabriele",middleName:null,surname:"Guidi",fullName:"Gabriele Guidi",slug:"gabriele-guidi"},{id:"89325",title:"Dr.",name:"Fabio",middleName:null,surname:"Remondino",fullName:"Fabio Remondino",slug:"fabio-remondino"}]},{id:"28866",type:"chapter",title:"3D Modeling of a Natural Killer Receptor, Siglec-7: Critical Amino Acids for Glycan-Binding and Cell Death-Inducing Activity",slug:"3d-modeling-of-a-natural-killer-receptor-siglec-7-critical-amino-acids-for-glycan-binding-and-cell-d",totalDownloads:2199,totalCrossrefCites:0,signatures:"Toshiyuki Yamaji, Yoshiki Yamaguchi, Motoaki Mitsuki, Shou Takashima, Satoshi Waguri, Yasuhiro Hashimoto and Kiyomitsu Nara",reviewType:"peer-reviewed",authors:[{id:"85829",title:"Prof.",name:"Yasuhiro",middleName:null,surname:"Hashimoto",fullName:"Yasuhiro Hashimoto",slug:"yasuhiro-hashimoto"},{id:"118954",title:"Dr.",name:"Toshiyuki",middleName:null,surname:"Yamaji",fullName:"Toshiyuki Yamaji",slug:"toshiyuki-yamaji"},{id:"118955",title:"Dr.",name:"Yoshiki",middleName:null,surname:"Yamaguchi",fullName:"Yoshiki Yamaguchi",slug:"yoshiki-yamaguchi"},{id:"118956",title:"Dr.",name:"Motoaki",middleName:null,surname:"Mitsuki",fullName:"Motoaki Mitsuki",slug:"motoaki-mitsuki"},{id:"118958",title:"Dr.",name:"Shou",middleName:null,surname:"Takashima",fullName:"Shou Takashima",slug:"shou-takashima"},{id:"118960",title:"Prof.",name:"Satoshi",middleName:null,surname:"Waguri",fullName:"Satoshi Waguri",slug:"satoshi-waguri"},{id:"118963",title:"Dr.",name:"Kiyomitsu",middleName:null,surname:"Nara",fullName:"Kiyomitsu Nara",slug:"kiyomitsu-nara"}]},{id:"28867",type:"chapter",title:"Applications of Computational 3D–Modeling in Organismal Biology",slug:"applications-of-computational-3d-modeling-in-biological-sciences",totalDownloads:2956,totalCrossrefCites:5,signatures:"Christian Laforsch, Hannes Imhof, Robert Sigl, Marcus Settles, Martin Heß and Andreas Wanninger",reviewType:"peer-reviewed",authors:[{id:"57406",title:"Prof.",name:"Christian",middleName:null,surname:"Laforsch",fullName:"Christian Laforsch",slug:"christian-laforsch"},{id:"114845",title:"MSc.",name:"Hannes",middleName:null,surname:"Imhof",fullName:"Hannes Imhof",slug:"hannes-imhof"},{id:"131512",title:"MSc.",name:"Robert",middleName:null,surname:"Sigl",fullName:"Robert Sigl",slug:"robert-sigl"},{id:"131514",title:"Mr.",name:"Marcus",middleName:null,surname:"Settles",fullName:"Marcus Settles",slug:"marcus-settles"},{id:"131516",title:"Prof.",name:"Martin",middleName:null,surname:"Heß",fullName:"Martin Heß",slug:"martin-hess"},{id:"131517",title:"Prof.",name:"Andreas",middleName:null,surname:"Wanninger",fullName:"Andreas Wanninger",slug:"andreas-wanninger"}]},{id:"28868",type:"chapter",title:"Open Source 3D Game Engines for Serious Games Modeling",slug:"open-source-3d-game-engines-for-serious-games-modeling",totalDownloads:5632,totalCrossrefCites:7,signatures:"Andres Navarro, Juan Vicente Pradilla and Octavio Rios",reviewType:"peer-reviewed",authors:[{id:"79143",title:"Prof.",name:"Andres",middleName:null,surname:"Navarro Cadavid",fullName:"Andres Navarro Cadavid",slug:"andres-navarro-cadavid"},{id:"90462",title:"BSc.",name:"Juan Vicente",middleName:null,surname:"Pradilla",fullName:"Juan Vicente Pradilla",slug:"juan-vicente-pradilla"},{id:"90463",title:"BSc.",name:"Octavio",middleName:null,surname:"Rios",fullName:"Octavio Rios",slug:"octavio-rios"}]},{id:"28869",type:"chapter",title:"Refinement of Visual Hulls for Human Performance Capture",slug:"refinement-of-visual-hulls-for-human-performance-capture",totalDownloads:1735,totalCrossrefCites:0,signatures:"Toshihiko Yamasaki and Kiyoharu Aizawa",reviewType:"peer-reviewed",authors:[{id:"82400",title:"Prof.",name:"Toshihiko",middleName:null,surname:"Yamasaki",fullName:"Toshihiko Yamasaki",slug:"toshihiko-yamasaki"},{id:"88957",title:"Prof.",name:"Kiyoharu",middleName:null,surname:"Aizawa",fullName:"Kiyoharu Aizawa",slug:"kiyoharu-aizawa"}]},{id:"28870",type:"chapter",title:"Analytical Compact Models",slug:"analytical-compact-models",totalDownloads:3384,totalCrossrefCites:0,signatures:"Bruno Allard and Hervé Morel",reviewType:"peer-reviewed",authors:[{id:"63597",title:"Prof.",name:"Bruno",middleName:null,surname:"Allard",fullName:"Bruno Allard",slug:"bruno-allard"},{id:"66735",title:"Dr.",name:"Herve",middleName:null,surname:"Morel",fullName:"Herve Morel",slug:"herve-morel"}]},{id:"28871",type:"chapter",title:"Virtual Prototyping for Rapid Product Development",slug:"virtual-prototyping-for-rapid-product-development",totalDownloads:4269,totalCrossrefCites:2,signatures:"S.H. Choi and H.H. Cheung",reviewType:"peer-reviewed",authors:[{id:"13664",title:"Dr.",name:"S.H.",middleName:null,surname:"Choi",fullName:"S.H. Choi",slug:"s.h.-choi"},{id:"13744",title:"Dr.",name:"H.H.",middleName:null,surname:"Cheung",fullName:"H.H. Cheung",slug:"h.h.-cheung"}]},{id:"28872",type:"chapter",title:"Oriented Multi-Body System Virtual Prototyping Technology for Railway Vehicle",slug:"study-on-virtual-prototyping-based-railway-vehicle-feedback-design",totalDownloads:3737,totalCrossrefCites:0,signatures:"Guofu Ding, Yisheng Zou, Kaiyin Yan and Meiwei Jia",reviewType:"peer-reviewed",authors:[{id:"67763",title:"Prof.",name:"Guofu",middleName:null,surname:"Ding",fullName:"Guofu Ding",slug:"guofu-ding"},{id:"120529",title:"Dr.",name:"Yisheng",middleName:null,surname:"Zou",fullName:"Yisheng Zou",slug:"yisheng-zou"}]},{id:"28873",type:"chapter",title:"Enabling and Analyzing Natural Interaction with Functional Virtual Prototypes",slug:"enabling-and-analyzing-natural-interaction-with-functional-virtual-prototypes",totalDownloads:2488,totalCrossrefCites:0,signatures:"Frank Gommlich, Guido Heumer, Bernhard Jung, Matthias Lenk and Arnd Vitzthum",reviewType:"peer-reviewed",authors:[{id:"65134",title:"M.Sc.",name:"Frank",middleName:null,surname:"Gommlich",fullName:"Frank Gommlich",slug:"frank-gommlich"},{id:"68795",title:"Dr.",name:"Guido",middleName:null,surname:"Heumer",fullName:"Guido Heumer",slug:"guido-heumer"},{id:"68797",title:"Dr.",name:"Arnd",middleName:null,surname:"Vitzthum",fullName:"Arnd Vitzthum",slug:"arnd-vitzthum"},{id:"68798",title:"Prof.",name:"Bernhard",middleName:null,surname:"Jung",fullName:"Bernhard Jung",slug:"bernhard-jung"},{id:"119802",title:"Mr.",name:"Matthias",middleName:null,surname:"Lenk",fullName:"Matthias Lenk",slug:"matthias-lenk"}]},{id:"28874",type:"chapter",title:"Fluid Pressurization in Cartilages and Menisci in the Normal and Repaired Human Knees",slug:"fluid-pressurization-in-cartilages-and-menisci-in-the-normal-and-repaired-human-knees",totalDownloads:2430,totalCrossrefCites:0,signatures:"LePing Li and Mojtaba Kazemi",reviewType:"peer-reviewed",authors:[{id:"79100",title:"Prof.",name:"LePing",middleName:null,surname:"Li",fullName:"LePing Li",slug:"leping-li"},{id:"79189",title:"Dr.",name:"Mojtaba",middleName:null,surname:"Kazemi",fullName:"Mojtaba Kazemi",slug:"mojtaba-kazemi"}]}]},relatedBooks:[{type:"book",id:"9174",title:"Product Design",subtitle:null,isOpenForSubmission:!1,hash:"3510bacbbf4d365e97510bf962652de1",slug:"product-design",bookSignature:"Cătălin Alexandru, Codruta Jaliu and Mihai Comşit",coverURL:"https://cdn.intechopen.com/books/images_new/9174.jpg",editedByType:"Edited by",editors:[{id:"2767",title:"Prof.",name:"Catalin",surname:"Alexandru",slug:"catalin-alexandru",fullName:"Catalin Alexandru"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"72136",title:"Task-Based Conceptual Design of a Novel Product",slug:"task-based-conceptual-design-of-a-novel-product",signatures:"Hrayr Darbinyan",authors:[{id:"316419",title:"Dr.",name:"Hrayr",middleName:null,surname:"Darbinyan",fullName:"Hrayr Darbinyan",slug:"hrayr-darbinyan"}]},{id:"72545",title:"Integrated Model of Product Design Methods",slug:"integrated-model-of-product-design-methods",signatures:"Rosnani Ginting",authors:[{id:"315657",title:"Ph.D.",name:"Rosnani",middleName:null,surname:"Ginting",fullName:"Rosnani Ginting",slug:"rosnani-ginting"}]},{id:"72629",title:"Photogrammetry as an Engineering Design Tool",slug:"photogrammetry-as-an-engineering-design-tool",signatures:"Ana Pilar Valerga Puerta, Rocio Aletheia Jimenez-Rodriguez, Sergio Fernandez-Vidal and Severo Raul Fernandez-Vidal",authors:[{id:"320883",title:"Dr.",name:"Ana Pilar",middleName:null,surname:"Valerga Puerta",fullName:"Ana Pilar Valerga Puerta",slug:"ana-pilar-valerga-puerta"},{id:"321397",title:"Mr.",name:"Severo R.",middleName:null,surname:"Fernandez-Vidal",fullName:"Severo R. Fernandez-Vidal",slug:"severo-r.-fernandez-vidal"},{id:"321398",title:"Mr.",name:"Sergio",middleName:null,surname:"Fernandez-Vidal",fullName:"Sergio Fernandez-Vidal",slug:"sergio-fernandez-vidal"},{id:"321399",title:"Ms.",name:"Rocio A.",middleName:null,surname:"Jimenez-Rodriguez",fullName:"Rocio A. Jimenez-Rodriguez",slug:"rocio-a.-jimenez-rodriguez"}]},{id:"72471",title:"Virtual Prototyping Platform for Designing Mechanical and Mechatronic Systems",slug:"virtual-prototyping-platform-for-designing-mechanical-and-mechatronic-systems",signatures:"Cătălin Alexandru",authors:[{id:"2767",title:"Prof.",name:"Catalin",middleName:null,surname:"Alexandru",fullName:"Catalin Alexandru",slug:"catalin-alexandru"}]},{id:"71265",title:"Renovation and Reuse of Waste Electrical and Electronic Equipment in the Direction of Eco-Design",slug:"renovation-and-reuse-of-waste-electrical-and-electronic-equipment-in-the-direction-of-eco-design",signatures:"Panagiotis Sinioros, Abas Amir Haidari, Nikolaos Manousakis, Michael Lasithiotakis and Ourania Tzoraki",authors:[{id:"311288",title:"Ph.D.",name:"Michael",middleName:null,surname:"Lasithiotakis",fullName:"Michael Lasithiotakis",slug:"michael-lasithiotakis"},{id:"315082",title:"Mr.",name:"Abas",middleName:null,surname:"Haidari",fullName:"Abas Haidari",slug:"abas-haidari"},{id:"315083",title:"Prof.",name:"Panagiotis",middleName:null,surname:"Sinioros",fullName:"Panagiotis Sinioros",slug:"panagiotis-sinioros"},{id:"315084",title:"Dr.",name:"Ourania",middleName:null,surname:"Tzoraki",fullName:"Ourania Tzoraki",slug:"ourania-tzoraki"},{id:"315085",title:"Dr.",name:"Nikolaos",middleName:null,surname:"Manousakis",fullName:"Nikolaos Manousakis",slug:"nikolaos-manousakis"}]},{id:"72897",title:"Adaptation: A Lens for Viewing Technology Transfer in Construction Site Management",slug:"adaptation-a-lens-for-viewing-technology-transfer-in-construction-site-management",signatures:"Aghaegbuna Obinna U. Ozumba and Winston Shakantu",authors:[{id:"321437",title:"Associate Prof.",name:"Aghaegbuna",middleName:"Obinna U.",surname:"Obinna U. Ozumba",fullName:"Aghaegbuna Obinna U. Ozumba",slug:"aghaegbuna-obinna-u.-ozumba"},{id:"325018",title:"Prof.",name:"Winston",middleName:null,surname:"Shakantu",fullName:"Winston Shakantu",slug:"winston-shakantu"}]},{id:"72676",title:"Recent Developments of Combined Heat Pump and Organic Rankine Cycle Energy Systems for Buildings",slug:"recent-developments-of-combined-heat-pump-and-organic-rankine-cycle-energy-systems-for-buildings",signatures:"Wahiba Yaïci, Evgueniy Entchev, Pouyan Talebizadeh Sardari and Michela Longo",authors:[{id:"238927",title:"Prof.",name:"Michela",middleName:null,surname:"Longo",fullName:"Michela Longo",slug:"michela-longo"},{id:"240528",title:"Dr.",name:"Wahiba",middleName:null,surname:"Yaïci",fullName:"Wahiba Yaïci",slug:"wahiba-yaici"},{id:"268764",title:"Dr.",name:"Evgueniy",middleName:null,surname:"Entchev",fullName:"Evgueniy Entchev",slug:"evgueniy-entchev"},{id:"322163",title:"Dr.",name:"Pouyan",middleName:null,surname:"Talebizadeh Sardari",fullName:"Pouyan Talebizadeh Sardari",slug:"pouyan-talebizadeh-sardari"}]}]}],publishedBooks:[{type:"book",id:"5707",title:"Computer Simulation",subtitle:null,isOpenForSubmission:!1,hash:"9eec1723d4d4775dc9755db55aa387a6",slug:"computer-simulation",bookSignature:"Dragan Cvetkovic",coverURL:"https://cdn.intechopen.com/books/images_new/5707.jpg",editedByType:"Edited by",editors:[{id:"101330",title:"Dr.",name:"Dragan",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"907",title:"Modeling and Simulation in Engineering",subtitle:null,isOpenForSubmission:!1,hash:"93281d4b3fca095964b42229dac355ae",slug:"modeling-and-simulation-in-engineering",bookSignature:"Catalin Alexandru",coverURL:"https://cdn.intechopen.com/books/images_new/907.jpg",editedByType:"Edited by",editors:[{id:"2767",title:"Prof.",name:"Catalin",surname:"Alexandru",slug:"catalin-alexandru",fullName:"Catalin Alexandru"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],publishedBooksByAuthor:[{type:"book",id:"907",title:"Modeling and Simulation in Engineering",subtitle:null,isOpenForSubmission:!1,hash:"93281d4b3fca095964b42229dac355ae",slug:"modeling-and-simulation-in-engineering",bookSignature:"Catalin Alexandru",coverURL:"https://cdn.intechopen.com/books/images_new/907.jpg",editedByType:"Edited by",editors:[{id:"2767",title:"Prof.",name:"Catalin",surname:"Alexandru",slug:"catalin-alexandru",fullName:"Catalin Alexandru"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},onlineFirst:{chapter:{type:"chapter",id:"79153",title:"Types of Skin Grafts",doi:"10.5772/intechopen.100857",slug:"types-of-skin-grafts",body:'A skin graft is a piece of skin of variable thickness without any vascular connection, separated from the donor site, and afterwards transposed over the recepient site which is to be repaired [1].
This technique was used initially in India about 2.500–3.000 years ago by Tilemaker Caste. It was later rediscovered inthe XIX century and was the most used technique during World War I and II. And in 1823 Buenger was the first to describe a succesful intervention by transfering skin from the buttcheek to the nose [1]. It is a basic technique and an option of reconstruction after a tumor resection, in case of ulcers and burned patients [1].
Skin graft execution is simpler than most skin flaps and can be performed in almost any wound with a vascularized bed. One of the great advantages of skin grafts is that they are very variable in size and shape to allow wound closure of wound defects of different sizes. There are many sites that can be donor sites making it easier for the skin to match.
Wound closure should always follow the principles of the reconstructive ladder, which directs the surgeon to use the least complex method of closure to achieve an ideal cosmetic result [2].
Often a graft may be used when healingof a full thickness wound by second intention, a primary closure, or utilization of a local flap are not feasible options [3].
In some instances, grafts can be used in combination with linear repairs or flaps for skin reconstruction surgery. In addition, skin grafts can be used for shallow defects, or in a patient with multiple morbidities who cannot tolerate a more complex or multi-stage repair [4].
There are many ways in which skin grafts can be classified, based on their origin, thickness, composition, time in which they are performed, geometry and if it meshed or not (Table 1).
Character | Types |
---|---|
Origin |
|
Thickness |
|
Time |
|
Expansion |
|
Classification of skin grafts.
According to their origin, skin grafts can be divided in 3: Autografts, allografts and xenografts.
Autografts are taken from the patient’s own skin, and they are the most common used skin grafts.
Allografts come from another person’s skin. And xenograftsare derived from another species, other than human skin, for example porcine grafts. Both allografts and xenografts are used in chronic wounds or burn wounds. Their utility comes from their ability to stimulate wound healing, provide protection and achieve debridement [3].
In terms of thickness, they are distinguished as: Split-thickness skin grafts and full-thickness skin grafts [1] and composite grafts.
Split-thickness skin grafts are composed by epidermis and a variable thickness of dermis. They can be subdivided in 3 [1]:
Thin: 0.15–0.25 mm
Intermediate: 0.3–0.4 mm
Thick: 0.5–0.6 mm
Full-thickness skin grafts are composed of epidermis and dermis with skin appendages [1].
The amount of dermis in the skin graft determines many properties of the graft, such as resistance to pressure and shear forces, shrinkage, sensitibity and esthetic results. In other words, the thicker the graft the better mechanical, functional and aesthethic properties, but also this means that the neo and revascularization of the graft will be more difficult.
If the graft includes other tissue besides skin it is a composite graft. Composite grafts are made by two different tisular structures, skin and cartilage most of the cases [1].
According to the moment in time in which the graft is realized [1]:
Immediate: Realized just after the resection of the tumor. To repair the loss of substance.
Differed: The graft is performed in a second intervention, in order to have the confirmation of clean margins. This approach is justified for agressive tumors and tumor relapse, to obtain granulation tissue when the surgery is extense in depth and/or width, and exceptionally when hemostasis of the reciepent site cannot be achieved [1].
Another way to classify skin grafts is based if a technique is used to expand the graft itself. If the skin graft is directly applied onto the defect without further treatment this is called an unmeshed or sheet graft [5].
A mesh graft is when multiple slits are made on the graft. Usually this is made with a mechanical mesher and it is common to apply this on split-thickness skin grafts. Meek graft is a skin graft that is cut in stripes, equal in lenght and width. It used a cork plate and a machine with rotating blades. Punch grafts are obtained using a punch, which allows to obtain multiple full-thinkcness skin grafts, it is a useful technique to cover large wound areas.
The survival of skin grafts is a complex process that involves different phases. In order to undestand them it is necessary to remember how the skin is irrigated.
Skin consists of 2 basic layers, the epidermis and dermis. The dermis is divided into a papillary and reticular layer. Within the dermis resides the skin’s neurovascular supply. The subcutaneous tissue beneath the skin contains the superficial fascia and subcutaneous fat [6].
The skin vasculature consists of a deep dermal/subcutaneous plexus and a superficial plexus [6]. Both plexi are connected via communicating vessels. The superficial plexus can be found in the reticular dermis, near its junction with the papillary dermis. The deep plexus, located in the subcutaneous tissue, consists of an extensive venous plexus, capable of holding large quantities of blood and an accompanying artery. The deep plexus supplies vessels to the pilosebaceous units and the superficial plexus. Arteriovenous anastomoses also exist in the region [6, 7]. The superficial plexus originates vascular loops within the papillary dermis. Nutrients diffuse into the epidermis because no vessels cross the dermal-epidermal junction. Venous and lymphatic systems exist in a similar arrangement [6].
Unlike flaps, grafts depend on the ingrowth of capillaries from the recipient site for their ultimate survival [8].
For the first 24–48 hours, the graft initially derives oxygen and nutrients from the underlying bed by diffusion (plasmatic diffusion or imbibition). The graft can increase in weight by up to 40%. During imbibition, the graft and the wound bed are held together via a layer of fibrin. The fibrin is eventually replaced by granulation tissue [2, 3, 8].
The second phase, inosculation, is defined by an anastomosis of the preexistent vessels of the graft and the wound base. This phase occurs during the second and third postoperative days [3].
For graft-take tooccur, the recipient site must be capableof producing capillary buds. Since capillaryoutgrowth is needed both to producegranulation tissue and to nourish askin graft, areas that granulate well (muscle and deep fascia), acceptgrafts readily. Other surfaces, such astendon denuded of its fascia covering, exposed bone, or cartilage, are incapableof producing granulation tissue and, therefore, are unable to nourish a skingraft [9].
Also the skingraft must remain in close approximationto the recipient bed during thephase of capillary ingrowth. The presenceof air, serum, or fluid between thegraft and recipient bed creates a barrierthrough which the capillaries cannotgrow fast enough to prevent necrosis ofthe graft [9].
Revascularization involves the growth, proliferation, and connection of vessels from the recipient base and sidewalls. The rate of revascularization is dependent on the thickness of the graft and the vascularity of the recipient bed. As a general rule, the thinner theskin graft, the faster it establishes a blood supply [9].
Within 4 to 7 days, full circulation has been restored to the graft. Restoration of lymphatic circulation also occurs within 7 days. Reinnervation of the graft begins approximately 2 to 4 weeks after grafting; however, full sensation may require several months or even years to return to normal [8].
STSG are indicated for large defects (>5 cm), slow- or nonhealing chronic wounds, or as a temporary cover when monitoring a wound bed for potential cancer recurrence [3, 10].
This type of skin graft is useful when the definitive reconstruction of a wound is delayed, either for surveillance of an aggressive cancer or when granulation tissue is needed on the bed of the recepient site.
Donor site selection is based on the size of the graft needed to cover the wound, the patient’s ability to care for the donor site and how the donor site wound would affect the patient’s daily activities (walk, sit, sleep). Taking all this in consideration the medial and lateral thighs are most used for donor site. Also it is practical to consider donor sites that can be hiddenunder clothing, such as the medial or lateral upper arm, abdomen, back andbuttocks. Donorsites that offer large flat surfaces also facilitate theharvesting of STSGs [11].
Once the donor area has been selected, it should be shaved of all hair to aid in the harvesting and handling of the skin graft [8].
The donor site should be prepared and draped in the normal sterile fashion and local anesthesia may be infiltrated [4]. If the graft requirement is significant, saline may be infiltrated instead of local anesthesia to make the graft harvesting easier.
STSG may be harvested using a dermatome or the freehand technique, depending on the size of graft needed and location of the recipient site [3].
There are many electric dermatomes available (e.g. Davol, Padgett, Zimmer), all of them with adjustable graft width and thickness.
After marking the dimensions of the graft (mark the skin graft 15–20% larger than needed and thus allow for shrinkage), the skin is lubricated with sterile ointment. The assistant surgeon should keep the skin flat and stretched by counter-tension [12].
The dermatome is held at a 30° to 45° angle, and advanced, from proximal to distal, while traction is maintained on the skin. Toothless forceps are used to prevent the graft from getting snared, and the dermatome is lifted away while still engaged [10, 11, 12].
After the STSG is obtained it is transferred to a sterile-saline soaked gauze to keep it moist. Attention must be paid in order not to confuse the dermal and epidermal surface when handling the skin graft. A useful tip is to remember that the dermal surface glistens more than the epidermal side and also the edges of the graft will curve to the dermal surface.
Meshing the STSG allows the graft to cover a wound that is larger in dimensions than the unmeshed STSG. Meshing increases the coverage area by 25–35% and also increases the flexibility of the graft so it can be used over mobile surfaces such as joints [4].
It also provides fenestrations in the skin graft that allow the egress of fluid from the wound bed, which minimizes the chance of seroma or hematoma formation and subsequent graft failure. Mechanical meshing of grafts is recommended when they are being used to cover defects >8 cm in diameter or when extensive serosanguineous drainage is anticipated [4].
Meshing can be accomplished in a variety of ways, but the most common and efficient method is to use a hand-powered mechanical mesher to produce multiple uniform slits in a skin graft, approximately 0.05 inches apart. The skin to be meshed is placed on a carrier with the dermis side up and spread over the carrier. The graft is then passed through the mesher. It is is then covered with moist saline gauze. Split thickness grafts can be meshed to obtain expansion from 1:1 upto 1:4. In case of paucity of donor site and large recipient area the graft can be meshed to achieve expansion of 1:9. The survival of such widely meshed graft can be improved by covering it with 1: 3 meshed allograft. This methodis called sandwich grafting. Xenograft can also be used for this purpose. The disadvantages of meshing include suboptimal cosmesis and delay in ultimate closure of the grafted site [2, 8].
The donor site should be temporarily covered with gauze soaked in 1% lidocaine with epinephrine while attention is quickly turned back to the graft. The epinephrine in the solution promotes hemostasis in this acute, abrasion-like donor site [4].
The recipient site must be prepared before the placement of the STSG. Since there must be close contact between the skin graft and wound bed, a good hemostasis should be done in order to prevent hematoma formation. If the wound bed has granulated tissue all the fibrinous debris have to be removed.
When the STSG is placed over the recipient site sometimes it needs to be cut to fit the size of the wound. After the graft is trimmed it has to be attached to initiate contact between the graft and the wound bed. In order to achieve this a tie-over dressing is used. First apply an antibiotic impregnated gauze on the graft, after a foam dressing or sponge is putover the gauze, put single sutures around the defect and leave long tails of the sutures, this long tails will be tied over the dressing or sponge.
Attention is subsequently turned to the donor site, which is best treated as a superficial abrasion. Further hemostasis is usually not necessary. A moist occlusive dressing is applied, making use of antibiotic ointment or petrolatum and a nonadherent dressing such aspolymer film [4].
The donor site presents important drainage during the first 48 hrs, this is a normal process and it is important to inform the patient. In order to avoid fluid colection the dressing can be punctured at the site to allow drainage or the dressing can be changed more frequently.
In the postoperative period the most important part is to minimize all physical activity. Since any abrupt or strong movement may affect the graft, shearing forces can be created and the graft itself may be damaged or bleeding from the wound bed can occur. Separation of the graft from the recipient site compromises its vascularization and eventually its survival. This is why the patient is adviced to elevate the intervened area and restrict all physical efforts.
The manipulation of the dressings should be kept at minimum in order to avoid contamination or involuntary movement that may disrupt the process of revascularization of the graft, which takes about 3 to 5 days.
After wound healing is achieved it is important to advice the patient to avoid sunshine and to use sun-blocking agents to prevent hyperpigmentation, use a greasy ointment to reduce dryness and itching [12].
The advantages of using this type of skin graft are: Very easy and fast harvesting, provides good color match in most cases, they may be obtained from any area of the body, provides skin for large defects [12].
The disadvantages of this type of grafts are: Graft contraction and hyperpigmentation (Split thickness grafts will contract 10–20% immediately after harvest and up to 20–50% over time), fixation may be inadequate, leading to shearing and wound dehiscence, cannot be used on exposed tendon, nerves, cartilage, or bone, development of hematoma or seroma may lead to poor vascularization of the graft, in case of wound infection, skin graft may turn necrotic within 24 h [2, 12].
FTSG are very useful in dermatologic surgery, especially after the removalof a skin cancer, areas that are conducive to FTSG include nasal ala and tip, helix, medial canthus, lower eyelid, digits, and extremities. FTSG should be limited to less than 5 cm [3].
In order to maximize cosmesis, various factors must be taken into account when choosing a site to harvest, including photodamage, color, existing adnexal structures (hair), and the appearance of the donor site scar. Donor skin should be devoid of malignant lesions or any changes that might later be confused for recurrence of malignancy. Commonly used sites for FTSG are: pre- and postauricular regions, creases of the upper eyelids, nasolabial folds, supraclavicular region, lateral neck, antecubital fossa, and groin [3, 8].
Once the appropriate donor site has been chosen, anesthetized, cleansed, and prepared for harvest, a template of the defect is made by using gauze, cardboard labels, or foil from suture packaging. The template is then transposed to the donorsite.
The skin graft will contract at the recepient site, for this reason it is important to make the template 10–20% bigger in order to avoid distortion of the anatomy of the area that was intervened. When eyelids defects are closed using a skin graft the template needs to be oversized more so that ectoprion will not develop.
Full thickness grafts should be harvested at the level just deep to the dermis, not down to fascia, as the graft will need to be thinned [2]. Once the graft is obtained, all the subcutaneous tissue must be removed using curved iris scissors. Remove the adherent fat by putting the graft under tension. Roll the graft overyour forefinger and pull it down with your middle finger and thumb [12]. The goal is to expose the dermis. Since any remaining fat will obstruct the imbibition phase.
Remoistening the graft periodically with sterile saline or local anesthetic during the defatting procedure is recommended to prevent desiccation [11].
Before placing a skin graft, the recipient site must be clean and not actively bleeding [8].
After placing the graft in the recepient site it needs to be fixated with sutures. Optimal suturing technique is with the needle entering the graft first, 2–3 mm from the edge, and then exiting in the adjacent recipient site skin and subsequently tied with 3–4 throws of a square knot. Distance between sutures is usually 3–4 mm [4] (Figures 1 and 2).
Initial attachment of the Full-skin graft.
Complete placement of sutures attaching the FSG.
It is important to place sutures sufficiently deep such that both the papillary and reticular dermis of the graft and recipient site are directly aligned with each other. Suturing that is too superficial apposes only the papillary dermis, leaving a dead space in the deeper reticular dermis which tends to retract more than the superficial papillary dermis. This increases the risk of both hematoma formation and a depressed, more visible scar. Excessively superficial suturing has also been implicated as a potential etiology of graft pin-cushioning [4].
Bolsters are used to stabilize and protect the graft and to provide a uniform pressure dressing to the grafted area. Bolster materials include saline-soaked dental rolls, saline-soaked gauze, and mineral oil–soaked cotton balls. The bolsters should have a nonstick surface and should be fitted to the size of the graft. They are secured with simple interrupted sutures using 4–0 silk are placed in pairs directly across from one another 2–3 mm from the graft margins. Bolsters are left in place for 5 to 7 days [3, 10].
The donor site is repaired later after the graft has been placed as it is important to allow nutrient diffusion to the graft to begin [3].
During the postoperative period the use of antibiotic oinment is recommended for the recipient and donor site in order to avoid infection. Also the dressing in the recipient site has to be checked every day for one week and every 2 to 3 days at the donor site. Both areas have to be cleaned with saline solution. The sutures can be removed after 7–8 days.
Development of pink color during 3 to 7 days signals neovascularization and successful graft take. Over the ensuing 1 to 2 months, pink color diminishes, but the graft may remain lighter than surroundingskin (Figures 3 and 4) [10].
Full-skin graft appearance after removing the bolster (48 hrs).
Full-skin graft appearance at one month after the surgery.
The advantages of this technique are: easy and rapid harvesting, provides excellent color match and adequate thickness of the skin, a small scar remains after skin harvesting and primary closure of the donor site [12].
The disadvantages of this type of grafts are: limited size of skin for harvesting, donor site will require STSG when primary closure is not possible [12].
This type of graft consists of two different type of tissues. Mostly cartilage with or without subcutaneous tissue and the overlying skin. Because they offer support and structure composite grafts are used to repair full-thickness defects of the nasal ala and helical rim. The size of the defect for this type of graft is 1 cm or less.
They can also beused to fill partial-thickness defects that extend toodeeply for a full-thickness skin graft to heal withoutleaving a concavity or contraction of the free margin [13].
The metabolic needs of composite grafts differ from the needs of skin grafts, the former have greater demands and needs rapid revascularization in order to survive. The blood flow formed by the anastomoses between the wound bed and composite graft can extend only to a small portion beyond the margin of the graft. Portions of the graft that are beyond 1 cm from the vessel anastomoses is at risk of not receiving appropiate blood flow and is at risk of necrosis.
Its survival depends on passivediffusion of oxygen and nutrients through theperichondrium from adjacent vascularized tissue. The vascularity of the recipient bed is also aconsideration. The nasal ala is generally well suppliedwith blood vessels and can usually support composite grafts [13].
Because the cartilage in these grafts carries with itthe skin that will cover the cutaneous portion of thedefect, the donor site should be chosen so that thetexture, color, and nature of appendages match as best aspossible the features of the recipient site [13].
The ear exhibits a wide range of thicknesses, curvatures, and appendage-type structures [13]. Composite auricular graftsharvested from the helical crus are particularlyuseful, because they provide thin skin that istightly adherent to the underlying cartilage. Thegraft affords structural support and resemblesfine nasal skin being reconstructed [10].
First, the recipient site is measured andthe donor site marked such that the composite graftwill be approximately 5–10% larger than thedefect. This oversizing will compensatefor the natural shrinkage of the graft that occurs during healing [13].
Once the donor site has been closed, the graft isprepared. Using a pair of curved iris scissors, the skinis trimmed from the wings to expose the underlyingcartilage. The remaining cartilaginous pegs shouldframe the lateral aspects of the graft [13]. A hemostat or scissors maybe used to undermine pockets on each side of the defect. These pockets should run parallel to the alar or helicalrim and should only be deep enough to accommodatethe cartilaginous pegs of the composite graft. And the cartilaginouspegs are gently inserted into these pocketsso that the graft interlocks with its recipient bed [13].
The graft is securedin place with a single layer of suture throughskin and perichondrium, minimizing sutures passing through cartilage. Limiting sutures andgraft trauma facilitates robust vessel ingrowth [10].
Antibiotic-impregnated gauze should be placed inthe patient’s nostril to stabilize the alar rim. Apressure dressing or bolster should be used to stabilize the graft [13].
In the postoperative perdiod, the intranasal gauze needs to stay for 24-48 hrs and then removed so that the wound can be cleaned. Any activity that may elevate the patient’s blood pressure has to be avoided. The sutures can be removed after 7 days.
Composite grafts change their color during the following days after the procedure. At first the graft will be pallid because of tha lack of blood flow. After 6 hrs it changes color to lightly pink, representing the begining of the vessel anastomoses. The next 24–48 hrs the graft becomes blue because of venous congestion that follows, and will remain like this for a week, until venous drainage begins. Later it will become pink and this indicates adequate blood flow and graft survival. The pink color will increase in the next days reaching a red color as the healing process continues. After 2 to 6 months later the red color will disappear. The final tone can be achieved after 1 or 2 years.
All types of grafts can present complications that may compromise it’s survival.
Complete or partial graft failure is the primary complicationseen with FTSGs. Causes for failure includehematoma, graft-bed contact disruption, infection, smoking, and excessive electrocoagulation of the wound base [8].
If the skin graft develops necrosis it should not be debrided, the necrotic tissue serves as a natural dressing that allows new skin formation under it. There can be some contour alterations made by the healing process, specially on the nose (elevation), that can improve by themselves in a period of 6 months, if after that period the alterations remain dermabrasion or intralesional steroids can be used.
The acute complications of STSG are the same of those presented by FTSG (hematoma, seroma, graft movement). Long term complications of STSG are related to skin graft contraction that may distort free margins, impair function, develop graft fragility or alter the final aesthethic result.
If infection of the graft is suspected or developed a skin culture needs to be performed and proper antibiotics should be given.
In composite grafts short-term potential complications, includebleeding, infection, and necrosis of the graft. This last complication presents initially as a yellowish whiteness that remains and then is followed by the aparition of a black eschar.
Should the graft become necrotic, the escharshould not be debrided. The necrosis may only besuperficial, with the underlying dermis and cartilage still viable [13].
Long term complications of composite grafts are consequence of an inappropiate anchorage of the graft to the recipient site, trauma or extreme contractural forces, all of which can cause displacement or deformation of the graft.
Since their initial use almost 3.000 years ago skin grafts have been a very useful option for wound repair. Whether it is due to an ulcer, burn or surgery, wound closure can be accomplished via skin grafts in any of their modalities. Skin grafts offer a very useful alternative for reconstruction that can be applied to almost any site of the body. It is imperative to select an adequate donor site to offer the best match possible. The process and technique of each type of graft is easy to perfom. And with the correct sterile and surgical technique the possibilty of complications is minimized. This type of wound management should not be considered as a last resort, since their advantages outweigh the disadvantages.
This is a brief overview of the main steps involved in publishing with IntechOpen Compacts, Monographs and Edited Books. Once you submit your proposal you will be appointed a Author Service Manager who will be your single point of contact and lead you through all the described steps below.
",metaTitle:"Publishing Process Steps and Descriptions",metaDescription:"This is a brief overview of the main steps involved in publishing with InTechOpen Compacts, Monographs and Edited Books. Once you submit your proposal you will be appointed a Publishing Process Manager who will be your single point of contact and lead you through all the described steps below.",metaKeywords:null,canonicalURL:"page/publishing-process-steps",contentRaw:'[{"type":"htmlEditorComponent","content":"1. SEND YOUR PROPOSAL
\\n\\nPlease complete the publishing proposal form. The completed form should serve as an overview of your future Compacts, Monograph or Edited Book. Once submitted, your publishing proposal will be sent for evaluation, and a notice of acceptance or rejection will be sent within 10 to 30 working days from the date of submission.
\\n\\n2. SUBMIT YOUR MANUSCRIPT
\\n\\nAfter approval, you will proceed in submitting your full-length manuscript. 50-130 pages for compacts, 130-500 for Monographs & Edited Books.Your full-length manuscript must follow IntechOpen's Author Guidelines and comply with our publishing rules. Once the manuscript is submitted, but before it is forwarded for peer review, it will be screened for plagiarism.
\\n\\n3. PEER REVIEW RESULTS
\\n\\nExternal reviewers will evaluate your manuscript and provide you with their feedback. You may be asked to revise your draft, or parts of your draft, provide additional information and make any other necessary changes according to their comments and suggestions.
\\n\\n4. ACCEPTANCE AND PRICE QUOTE
\\n\\nIf the manuscript is formally accepted after peer review you will receive a formal Notice of Acceptance, and a price quote.
\\n\\nThe Open Access Publishing Fee of your IntechOpen Compacts, Monograph or Edited Book depends on the volume of the publication and includes: project management, editorial and peer review services, technical editing, language copyediting, cover design and book layout, book promotion and ISBN assignment.
\\n\\nWe will send you your price quote and after it has been accepted (by both the author and the publisher), both parties will sign a Statement of Work binding them to adhere to the agreed upon terms.
\\n\\nAt this step you will also be asked to accept the Copyright Agreement.
\\n\\n5. LANGUAGE COPYEDITING, TECHNICAL EDITING AND TYPESET PROOF
\\n\\nYour manuscript will be sent to Straive, a leader in content solution services, for language copyediting. You will then receive a typeset proof formatted in XML and available online in HTML and PDF to proofread and check for completeness. The first typeset proof of your manuscript is usually available 10 days after its original submission.
\\n\\nAfter we receive your proof corrections and a final typeset of the manuscript is approved, your manuscript is sent to our in house DTP department for technical formatting and online publication preparation.
\\n\\nAdditionally, you will be asked to provide a profile picture (face or chest-up portrait photograph) and a short summary of the book which is required for the book cover design.
\\n\\n6. INVOICE PAYMENT
\\n\\nThe invoice is generally paid by the author, the author’s institution or funder. The payment can be made by credit card from your Author Panel (one will be assigned to you at the beginning of the project), or via bank transfer as indicated on the invoice. We currently accept the following payment options:
\\n\\nIntechOpen will help you complete your payment safely and securely, keeping your personal, professional and financial information safe.
\\n\\n7. ONLINE PUBLICATION, PRINT AND DELIVERY OF THE BOOK
\\n\\nIntechOpen authors can choose whether to publish their book online only or opt for online and print editions. IntechOpen Compacts, Monographs and Edited Books will be published on www.intechopen.com. If ordered, print copies are delivered by DHL within 12 to 15 working days.
\\n\\nIf you feel that IntechOpen Compacts, Monographs or Edited Books are the right publishing format for your work, please fill out the publishing proposal form. For any specific queries related to the publishing process, or IntechOpen Compacts, Monographs & Edited Books in general, please contact us at book.department@intechopen.com
\\n"}]'},components:[{type:"htmlEditorComponent",content:'1. SEND YOUR PROPOSAL
\n\nPlease complete the publishing proposal form. The completed form should serve as an overview of your future Compacts, Monograph or Edited Book. Once submitted, your publishing proposal will be sent for evaluation, and a notice of acceptance or rejection will be sent within 10 to 30 working days from the date of submission.
\n\n2. SUBMIT YOUR MANUSCRIPT
\n\nAfter approval, you will proceed in submitting your full-length manuscript. 50-130 pages for compacts, 130-500 for Monographs & Edited Books.Your full-length manuscript must follow IntechOpen's Author Guidelines and comply with our publishing rules. Once the manuscript is submitted, but before it is forwarded for peer review, it will be screened for plagiarism.
\n\n3. PEER REVIEW RESULTS
\n\nExternal reviewers will evaluate your manuscript and provide you with their feedback. You may be asked to revise your draft, or parts of your draft, provide additional information and make any other necessary changes according to their comments and suggestions.
\n\n4. ACCEPTANCE AND PRICE QUOTE
\n\nIf the manuscript is formally accepted after peer review you will receive a formal Notice of Acceptance, and a price quote.
\n\nThe Open Access Publishing Fee of your IntechOpen Compacts, Monograph or Edited Book depends on the volume of the publication and includes: project management, editorial and peer review services, technical editing, language copyediting, cover design and book layout, book promotion and ISBN assignment.
\n\nWe will send you your price quote and after it has been accepted (by both the author and the publisher), both parties will sign a Statement of Work binding them to adhere to the agreed upon terms.
\n\nAt this step you will also be asked to accept the Copyright Agreement.
\n\n5. LANGUAGE COPYEDITING, TECHNICAL EDITING AND TYPESET PROOF
\n\nYour manuscript will be sent to Straive, a leader in content solution services, for language copyediting. You will then receive a typeset proof formatted in XML and available online in HTML and PDF to proofread and check for completeness. The first typeset proof of your manuscript is usually available 10 days after its original submission.
\n\nAfter we receive your proof corrections and a final typeset of the manuscript is approved, your manuscript is sent to our in house DTP department for technical formatting and online publication preparation.
\n\nAdditionally, you will be asked to provide a profile picture (face or chest-up portrait photograph) and a short summary of the book which is required for the book cover design.
\n\n6. INVOICE PAYMENT
\n\nThe invoice is generally paid by the author, the author’s institution or funder. The payment can be made by credit card from your Author Panel (one will be assigned to you at the beginning of the project), or via bank transfer as indicated on the invoice. We currently accept the following payment options:
\n\nIntechOpen will help you complete your payment safely and securely, keeping your personal, professional and financial information safe.
\n\n7. ONLINE PUBLICATION, PRINT AND DELIVERY OF THE BOOK
\n\nIntechOpen authors can choose whether to publish their book online only or opt for online and print editions. IntechOpen Compacts, Monographs and Edited Books will be published on www.intechopen.com. If ordered, print copies are delivered by DHL within 12 to 15 working days.
\n\nIf you feel that IntechOpen Compacts, Monographs or Edited Books are the right publishing format for your work, please fill out the publishing proposal form. For any specific queries related to the publishing process, or IntechOpen Compacts, Monographs & Edited Books in general, please contact us at book.department@intechopen.com
\n'}]},successStories:{items:[]},authorsAndEditors:{filterParams:{sort:"featured,name"},profiles:[],filtersByRegion:[],offset:0,limit:12,total:null},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{hasNoEditors:"0",sort:"dateEndThirdStepPublish",topicId:"5,6,12,13,18 FILLER ads"},books:[{type:"book",id:"11609",title:"Fungicides - Application, Technologies, and Materials for the Future of Plant Disease Management",subtitle:null,isOpenForSubmission:!0,hash:"3a8c9d55c21ce8d69d2edc94f9e592f3",slug:null,bookSignature:"Dr. Mizuho Nita",coverURL:"https://cdn.intechopen.com/books/images_new/11609.jpg",editedByType:null,editors:[{id:"98153",title:"Dr.",name:"Mizuho",surname:"Nita",slug:"mizuho-nita",fullName:"Mizuho Nita"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11648",title:"Current Status and Ecological Aspects of Seabirds",subtitle:null,isOpenForSubmission:!0,hash:"7754b354f7deebdb8576189aefbdbc5c",slug:null,bookSignature:"Dr. Muhammad Nawaz Rajpar",coverURL:"https://cdn.intechopen.com/books/images_new/11648.jpg",editedByType:null,editors:[{id:"183095",title:"Dr.",name:"Muhammad Nawaz",surname:"Rajpar",slug:"muhammad-nawaz-rajpar",fullName:"Muhammad Nawaz Rajpar"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11620",title:"Tomato - From Cultivation to Processing Technology",subtitle:null,isOpenForSubmission:!0,hash:"cdc23b5aad5d52bc0f0327c453ac7a1b",slug:null,bookSignature:"Prof. Pranas Viskelis, Dr. Dalia Urbonaviciene and Dr. Jonas Viskelis",coverURL:"https://cdn.intechopen.com/books/images_new/11620.jpg",editedByType:null,editors:[{id:"83785",title:"Prof.",name:"Pranas",surname:"Viskelis",slug:"pranas-viskelis",fullName:"Pranas Viskelis"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11020",title:"Dietary Supplements - Challenges and Future Research",subtitle:null,isOpenForSubmission:!0,hash:"2283ae2d0816c17ad46cbedbe4ce5e78",slug:null,bookSignature:"Dr. Venketeshwer Rao and Dr. Leticia Rao",coverURL:"https://cdn.intechopen.com/books/images_new/11020.jpg",editedByType:null,editors:[{id:"82663",title:"Dr.",name:"Venketeshwer",surname:"Rao",slug:"venketeshwer-rao",fullName:"Venketeshwer Rao"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11627",title:"Oilseed Crops - Biology, Production and Processing",subtitle:null,isOpenForSubmission:!0,hash:"010cdbbb6a716d433e632b350d4dcafe",slug:null,bookSignature:"Prof. Mirza Hasanuzzaman and MSc. Kamrun Nahar",coverURL:"https://cdn.intechopen.com/books/images_new/11627.jpg",editedByType:null,editors:[{id:"76477",title:"Prof.",name:"Mirza",surname:"Hasanuzzaman",slug:"mirza-hasanuzzaman",fullName:"Mirza Hasanuzzaman"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11615",title:"Humus and Humic Substances - Recent Advances",subtitle:null,isOpenForSubmission:!0,hash:"a9b75be6b30278fca930c4dd560a8b2b",slug:null,bookSignature:"Prof. Abdelhadi Makan",coverURL:"https://cdn.intechopen.com/books/images_new/11615.jpg",editedByType:null,editors:[{id:"247727",title:"Prof.",name:"Abdelhadi",surname:"Makan",slug:"abdelhadi-makan",fullName:"Abdelhadi Makan"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11802",title:"Honey - Composition and Properties",subtitle:null,isOpenForSubmission:!0,hash:"60482dae5e08f5b22b0c7a2749cdfc02",slug:null,bookSignature:"Dr. Muhammad Imran, Dr. Muhammad Haseeb Ahmad and Dr. Rabia Shabir Ahmad",coverURL:"https://cdn.intechopen.com/books/images_new/11802.jpg",editedByType:null,editors:[{id:"208646",title:"Dr.",name:"Muhammad",surname:"Imran",slug:"muhammad-imran",fullName:"Muhammad Imran"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10744",title:"Astrocytes in Brain Communication and Disease",subtitle:null,isOpenForSubmission:!0,hash:"8b6a8e2bb5f070305768945fdef8eed2",slug:null,bookSignature:"Prof. Denis Larrivee",coverURL:"https://cdn.intechopen.com/books/images_new/10744.jpg",editedByType:null,editors:[{id:"206412",title:"Prof.",name:"Denis",surname:"Larrivee",slug:"denis-larrivee",fullName:"Denis Larrivee"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11667",title:"Marine Pollution - Recent Developments",subtitle:null,isOpenForSubmission:!0,hash:"e524cd97843b075a724e151256773631",slug:null,bookSignature:"Dr. Monique Mancuso",coverURL:"https://cdn.intechopen.com/books/images_new/11667.jpg",editedByType:null,editors:[{id:"318562",title:"Dr.",name:"Monique",surname:"Mancuso",slug:"monique-mancuso",fullName:"Monique Mancuso"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11619",title:"Root Vegetables",subtitle:null,isOpenForSubmission:!0,hash:"2c5535e66fed5abd8f80ee521b51b2d3",slug:null,bookSignature:"Dr. Prashant Kaushik",coverURL:"https://cdn.intechopen.com/books/images_new/11619.jpg",editedByType:null,editors:[{id:"311935",title:"Dr.",name:"Prashant",surname:"Kaushik",slug:"prashant-kaushik",fullName:"Prashant Kaushik"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11644",title:"Structural and Molecular Aspects of DNA Repair",subtitle:null,isOpenForSubmission:!0,hash:"83dfefc2400d2d037281f1e25bbc544b",slug:null,bookSignature:"Prof. Subrata Kumar Dey",coverURL:"https://cdn.intechopen.com/books/images_new/11644.jpg",editedByType:null,editors:[{id:"31178",title:"Prof.",name:"Subrata",surname:"Dey",slug:"subrata-dey",fullName:"Subrata Dey"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11638",title:"Meat Science and Nutrition - Recent Advances and Innovative Processing Technologies",subtitle:null,isOpenForSubmission:!0,hash:"3923d89fcf837fac59c906f9694ab1f8",slug:null,bookSignature:"Dr. Muhammad Sajid Arshad",coverURL:"https://cdn.intechopen.com/books/images_new/11638.jpg",editedByType:null,editors:[{id:"192998",title:"Dr.",name:"Muhammad Sajid",surname:"Arshad",slug:"muhammad-sajid-arshad",fullName:"Muhammad Sajid Arshad"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:43},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:11},{group:"topic",caption:"Business, Management and Economics",value:7,count:6},{group:"topic",caption:"Chemistry",value:8,count:23},{group:"topic",caption:"Computer and Information Science",value:9,count:21},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:17},{group:"topic",caption:"Engineering",value:11,count:59},{group:"topic",caption:"Environmental Sciences",value:12,count:9},{group:"topic",caption:"Immunology and Microbiology",value:13,count:10},{group:"topic",caption:"Materials Science",value:14,count:28},{group:"topic",caption:"Mathematics",value:15,count:10},{group:"topic",caption:"Medicine",value:16,count:122},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:9},{group:"topic",caption:"Neuroscience",value:18,count:3},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:7},{group:"topic",caption:"Physics",value:20,count:12},{group:"topic",caption:"Psychology",value:21,count:10},{group:"topic",caption:"Robotics",value:22,count:4},{group:"topic",caption:"Social Sciences",value:23,count:8},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:4}],offset:12,limit:12,total:76},popularBooks:{featuredBooks:[],offset:0,limit:12,total:null},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"10584",title:"Engineered Wood Products for Construction",subtitle:null,isOpenForSubmission:!1,hash:"421757c56a3735986055250821275a51",slug:"engineered-wood-products-for-construction",bookSignature:"Meng Gong",coverURL:"https://cdn.intechopen.com/books/images_new/10584.jpg",publishedDate:"April 28th 2022",numberOfDownloads:3665,editors:[{id:"274242",title:"Dr.",name:"Meng",middleName:null,surname:"Gong",slug:"meng-gong",fullName:"Meng Gong"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10222",title:"Demyelination Disorders",subtitle:null,isOpenForSubmission:!1,hash:"b6c26ceccacdde70c41c587361bd5558",slug:"demyelination-disorders",bookSignature:"Stavros J. Baloyannis, Fabian H. Rossi and Welwin Liu",coverURL:"https://cdn.intechopen.com/books/images_new/10222.jpg",publishedDate:"May 4th 2022",numberOfDownloads:1713,editors:[{id:"156098",title:"Emeritus Prof.",name:"Stavros J.",middleName:"J.",surname:"Baloyannis",slug:"stavros-j.-baloyannis",fullName:"Stavros J. Baloyannis"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9544",title:"Global Trade in the Emerging Business Environment",subtitle:null,isOpenForSubmission:!1,hash:"fb8cb09b9599246add78d508a98273d5",slug:"global-trade-in-the-emerging-business-environment",bookSignature:"Muhammad Mohiuddin, Jingbin Wang , Md. Samim Al Azad and Selim Ahmed",coverURL:"https://cdn.intechopen.com/books/images_new/9544.jpg",publishedDate:"April 28th 2022",numberOfDownloads:2481,editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10979",title:"Parenting",subtitle:"Challenges of Child Rearing in a Changing Society",isOpenForSubmission:!1,hash:"6f345ebcf4fd61e73643c69063a12c7b",slug:"parenting-challenges-of-child-rearing-in-a-changing-society",bookSignature:"Sayyed Ali Samadi",coverURL:"https://cdn.intechopen.com/books/images_new/10979.jpg",publishedDate:"May 4th 2022",numberOfDownloads:1107,editors:[{id:"52145",title:"Dr.",name:"Sayyed Ali",middleName:null,surname:"Samadi",slug:"sayyed-ali-samadi",fullName:"Sayyed Ali Samadi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9808",title:"Contemporary Topics in Patient Safety",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"fb6371607c2c6c02c6a2af8892765aba",slug:"contemporary-topics-in-patient-safety-volume-1",bookSignature:"Stanislaw P. Stawicki and Michael S. Firstenberg",coverURL:"https://cdn.intechopen.com/books/images_new/9808.jpg",publishedDate:"April 20th 2022",numberOfDownloads:3307,editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10681",title:"Biodegradation Technology of Organic and Inorganic Pollutants",subtitle:null,isOpenForSubmission:!1,hash:"9a6e10e02788092872fd249436898e97",slug:"biodegradation-technology-of-organic-and-inorganic-pollutants",bookSignature:"Kassio Ferreira Mendes, Rodrigo Nogueira de Sousa and Kamila Cabral Mielke",coverURL:"https://cdn.intechopen.com/books/images_new/10681.jpg",publishedDate:"April 20th 2022",numberOfDownloads:3266,editors:[{id:"197720",title:"Ph.D.",name:"Kassio",middleName:null,surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10764",title:"Antenna Systems",subtitle:null,isOpenForSubmission:!1,hash:"2fbf1c7a5d92723f08198fc9b526a8ad",slug:"antenna-systems",bookSignature:"Hussain Al-Rizzo and Said Abushamleh",coverURL:"https://cdn.intechopen.com/books/images_new/10764.jpg",publishedDate:"April 28th 2022",numberOfDownloads:1868,editors:[{id:"153384",title:"Prof.",name:"Hussain",middleName:null,surname:"Al-Rizzo",slug:"hussain-al-rizzo",fullName:"Hussain Al-Rizzo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10668",title:"Sustainability of Concrete With Synthetic and Recycled Aggregates",subtitle:null,isOpenForSubmission:!1,hash:"55856c6a8bc3a5b21dae5a1af09a56b6",slug:"sustainability-of-concrete-with-synthetic-and-recycled-aggregates",bookSignature:"Hosam M. Saleh",coverURL:"https://cdn.intechopen.com/books/images_new/10668.jpg",publishedDate:"May 4th 2022",numberOfDownloads:856,editors:[{id:"144691",title:"Prof.",name:"Hosam",middleName:null,surname:"Saleh",slug:"hosam-saleh",fullName:"Hosam Saleh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10803",title:"Reactive Oxygen Species",subtitle:null,isOpenForSubmission:!1,hash:"176adcf090fdd1f93cb8ce3146e79ca1",slug:"reactive-oxygen-species",bookSignature:"Rizwan Ahmad",coverURL:"https://cdn.intechopen.com/books/images_new/10803.jpg",publishedDate:"April 28th 2022",numberOfDownloads:1704,editors:[{id:"40482",title:null,name:"Rizwan",middleName:null,surname:"Ahmad",slug:"rizwan-ahmad",fullName:"Rizwan Ahmad"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9032",title:"Corporate Social Responsibility",subtitle:null,isOpenForSubmission:!1,hash:"f609bf3251d7cc7bae0099a4374adfc3",slug:"corporate-social-responsibility",bookSignature:"Beatrice Orlando",coverURL:"https://cdn.intechopen.com/books/images_new/9032.jpg",publishedDate:"March 16th 2022",numberOfDownloads:7489,editors:[{id:"232969",title:"Prof.",name:"Beatrice",middleName:null,surname:"Orlando",slug:"beatrice-orlando",fullName:"Beatrice Orlando"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"10251",title:"Plankton Communities",subtitle:null,isOpenForSubmission:!1,hash:"e11e441ca2d2d5f631b1b4704505cfb6",slug:"plankton-communities",bookSignature:"Leonel Pereira and Ana Marta Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/10251.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"279788",title:"Dr.",name:"Leonel",middleName:null,surname:"Pereira",slug:"leonel-pereira",fullName:"Leonel Pereira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10830",title:"Animal Feed Science and Nutrition",subtitle:"Production, Health and Environment",isOpenForSubmission:!1,hash:"79944fc8fbbaa329aed6fde388154832",slug:"animal-feed-science-and-nutrition-production-health-and-environment",bookSignature:"Amlan Kumar Patra",coverURL:"https://cdn.intechopen.com/books/images_new/10830.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"310962",title:"Dr.",name:"Amlan",middleName:"Kumar",surname:"Patra",slug:"amlan-patra",fullName:"Amlan Patra"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10853",title:"Recent Advances in Polynomials",subtitle:null,isOpenForSubmission:!1,hash:"9e8671bae09ccaa8b8e276c639a737fc",slug:"recent-advances-in-polynomials",bookSignature:"Kamal Shah",coverURL:"https://cdn.intechopen.com/books/images_new/10853.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"231748",title:"Dr.",name:"Kamal",middleName:null,surname:"Shah",slug:"kamal-shah",fullName:"Kamal Shah"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10871",title:"Computed-Tomography (CT) Scan",subtitle:null,isOpenForSubmission:!1,hash:"966d8cf74fa27eea1b9cbc9a6ee94993",slug:"computed-tomography-ct-scan",bookSignature:"Reda R. Gharieb",coverURL:"https://cdn.intechopen.com/books/images_new/10871.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"225387",title:"Prof.",name:"Reda R.",middleName:"R.",surname:"Gharieb",slug:"reda-r.-gharieb",fullName:"Reda R. Gharieb"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10903",title:"Genetically Modified Plants and Beyond",subtitle:null,isOpenForSubmission:!1,hash:"4d7ed4faab99c92cd4d676dc86501df9",slug:"genetically-modified-plants-and-beyond",bookSignature:"Idah Sithole Niang",coverURL:"https://cdn.intechopen.com/books/images_new/10903.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"90172",title:"Prof.",name:"Idah",middleName:null,surname:"Sithole-Niang",slug:"idah-sithole-niang",fullName:"Idah Sithole-Niang"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10904",title:"Fusarium",subtitle:"An Overview of the Genus",isOpenForSubmission:!1,hash:"49d9063e43f94bd1517d65fbc58b93c3",slug:"fusarium-an-overview-of-the-genus",bookSignature:"Seyed Mahyar Mirmajlessi",coverURL:"https://cdn.intechopen.com/books/images_new/10904.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"100573",title:"Dr.",name:"Seyed Mahyar",middleName:null,surname:"Mirmajlessi",slug:"seyed-mahyar-mirmajlessi",fullName:"Seyed Mahyar Mirmajlessi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10654",title:"Brain-Computer Interface",subtitle:null,isOpenForSubmission:!1,hash:"a5308884068cc53ed31c6baba756857f",slug:"brain-computer-interface",bookSignature:"Vahid Asadpour",coverURL:"https://cdn.intechopen.com/books/images_new/10654.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"165328",title:"Dr.",name:"Vahid",middleName:null,surname:"Asadpour",slug:"vahid-asadpour",fullName:"Vahid Asadpour"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10676",title:"Recent Applications in Graph Theory",subtitle:null,isOpenForSubmission:!1,hash:"900c60742d224080732bd16bd25ccba8",slug:"recent-applications-in-graph-theory",bookSignature:"Harun Pirim",coverURL:"https://cdn.intechopen.com/books/images_new/10676.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"146092",title:"Dr.",name:"Harun",middleName:null,surname:"Pirim",slug:"harun-pirim",fullName:"Harun Pirim"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11196",title:"New Updates in E-Learning",subtitle:null,isOpenForSubmission:!1,hash:"6afaadf68e2a0a4b370ac5ceb5ca89c6",slug:"new-updates-in-e-learning",bookSignature:"Eduard Babulak",coverURL:"https://cdn.intechopen.com/books/images_new/11196.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"10086",title:"Prof.",name:"Eduard",middleName:null,surname:"Babulak",slug:"eduard-babulak",fullName:"Eduard Babulak"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9974",title:"E-Learning and Digital Education in the Twenty-First Century",subtitle:null,isOpenForSubmission:!1,hash:"88b58d66e975df20425fc1dfd22d53aa",slug:"e-learning-and-digital-education-in-the-twenty-first-century",bookSignature:"M. Mahruf C. Shohel",coverURL:"https://cdn.intechopen.com/books/images_new/9974.jpg",editedByType:"Edited by",publishedDate:"May 18th 2022",editors:[{id:"94099",title:"Dr.",name:"M. Mahruf C.",middleName:null,surname:"Shohel",slug:"m.-mahruf-c.-shohel",fullName:"M. Mahruf C. Shohel"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"761",title:"Wireless Communication Network",slug:"electrical-and-electronic-engineering-wireless-communication-network",parent:{id:"116",title:"Electrical and Electronic Engineering",slug:"electrical-and-electronic-engineering"},numberOfBooks:13,numberOfSeries:0,numberOfAuthorsAndEditors:320,numberOfWosCitations:299,numberOfCrossrefCitations:270,numberOfDimensionsCitations:428,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicId:"761",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"8086",title:"Wireless Sensor Networks",subtitle:"Design, Deployment and Applications",isOpenForSubmission:!1,hash:"1dd4efd7e9d6964d97acdfb61c669f14",slug:"wireless-sensor-networks-design-deployment-and-applications",bookSignature:"Siva S. Yellampalli",coverURL:"https://cdn.intechopen.com/books/images_new/8086.jpg",editedByType:"Edited by",editors:[{id:"62863",title:"Dr.",name:"Siva",middleName:null,surname:"Yellampalli",slug:"siva-yellampalli",fullName:"Siva Yellampalli"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10514",title:"Wireless Power Transfer",subtitle:"Recent Development, Applications and New Perspectives",isOpenForSubmission:!1,hash:"c0b2bfca0b284c263217545bccbeef64",slug:"wireless-power-transfer-recent-development-applications-and-new-perspectives",bookSignature:"Mohamed Zellagui",coverURL:"https://cdn.intechopen.com/books/images_new/10514.jpg",editedByType:"Edited by",editors:[{id:"151680",title:"Associate Prof.",name:"Mohamed",middleName:null,surname:"Zellagui",slug:"mohamed-zellagui",fullName:"Mohamed Zellagui"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7655",title:"UWB Technology",subtitle:"Circuits and Systems",isOpenForSubmission:!1,hash:"9a8844db3de865f124deb5c1c049d602",slug:"uwb-technology-circuits-and-systems",bookSignature:"Mohamed Kheir",coverURL:"https://cdn.intechopen.com/books/images_new/7655.jpg",editedByType:"Edited by",editors:[{id:"226312",title:"Dr.",name:"Mohamed",middleName:null,surname:"Kheir",slug:"mohamed-kheir",fullName:"Mohamed Kheir"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6844",title:"Array Pattern Optimization",subtitle:null,isOpenForSubmission:!1,hash:"e02b2568d2a4103098b8544c30c1325f",slug:"array-pattern-optimization",bookSignature:"Jafar Ramadhan Mohammed and Khalil Hassan Sayidmarie",coverURL:"https://cdn.intechopen.com/books/images_new/6844.jpg",editedByType:"Edited by",editors:[{id:"5854",title:"Dr.",name:"Jafar Ramadhan",middleName:null,surname:"Mohammed",slug:"jafar-ramadhan-mohammed",fullName:"Jafar Ramadhan Mohammed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6531",title:"Antennas and Wave Propagation",subtitle:null,isOpenForSubmission:!1,hash:"76af4534bc3daf038b32438c752655d4",slug:"antennas-and-wave-propagation",bookSignature:"Pedro Pinho",coverURL:"https://cdn.intechopen.com/books/images_new/6531.jpg",editedByType:"Edited by",editors:[{id:"122497",title:null,name:"Pedro",middleName:"Renato Tavares",surname:"Pinho",slug:"pedro-pinho",fullName:"Pedro Pinho"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5914",title:"Optical Fiber and Wireless Communications",subtitle:null,isOpenForSubmission:!1,hash:"d85edb2cf7e2780dc8f029a0f4021520",slug:"optical-fiber-and-wireless-communications",bookSignature:"Rastislav Roka",coverURL:"https://cdn.intechopen.com/books/images_new/5914.jpg",editedByType:"Edited by",editors:[{id:"112777",title:"Dr.",name:"Rastislav",middleName:null,surname:"Róka",slug:"rastislav-roka",fullName:"Rastislav Róka"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5480",title:"Towards 5G Wireless Networks",subtitle:"A Physical Layer Perspective",isOpenForSubmission:!1,hash:"da8d6b0a60a9c1ad989e111fde79785c",slug:"towards-5g-wireless-networks-a-physical-layer-perspective",bookSignature:"Hossein Khaleghi Bizaki",coverURL:"https://cdn.intechopen.com/books/images_new/5480.jpg",editedByType:"Edited by",editors:[{id:"21746",title:"Dr.",name:"Hossein",middleName:null,surname:"Khaleghi Bizaki",slug:"hossein-khaleghi-bizaki",fullName:"Hossein Khaleghi Bizaki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3406",title:"Selected Topics in WiMAX",subtitle:null,isOpenForSubmission:!1,hash:"a50705a81f7e17efa43d2639d47e3b15",slug:"selected-topics-in-wimax",bookSignature:"Gianni Pasolini",coverURL:"https://cdn.intechopen.com/books/images_new/3406.jpg",editedByType:"Edited by",editors:[{id:"79639",title:"Dr.",name:"Gianni",middleName:null,surname:"Pasolini",slug:"gianni-pasolini",fullName:"Gianni Pasolini"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"913",title:"Advanced Transmission Techniques in WiMAX",subtitle:null,isOpenForSubmission:!1,hash:"007b8894fe253046bab7aadc41eb6bc4",slug:"advanced-transmission-techniques-in-wimax",bookSignature:"Roberto C. Hincapie and Javier E. Sierra",coverURL:"https://cdn.intechopen.com/books/images_new/913.jpg",editedByType:"Edited by",editors:[{id:"72042",title:"Dr.",name:"Roberto",middleName:null,surname:"Hincapie",slug:"roberto-hincapie",fullName:"Roberto Hincapie"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"15",title:"Mobile Ad-Hoc Networks",subtitle:"Protocol Design",isOpenForSubmission:!1,hash:null,slug:"mobile-ad-hoc-networks-protocol-design",bookSignature:"Xin Wang",coverURL:"https://cdn.intechopen.com/books/images_new/15.jpg",editedByType:"Edited by",editors:[{id:"13802",title:"Prof.",name:"Xin",middleName:null,surname:"Wang",slug:"xin-wang",fullName:"Xin Wang"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"384",title:"Mobile Ad-Hoc Networks",subtitle:"Applications",isOpenForSubmission:!1,hash:null,slug:"mobile-ad-hoc-networks-applications",bookSignature:"Xin Wang",coverURL:"https://cdn.intechopen.com/books/images_new/384.jpg",editedByType:"Edited by",editors:[{id:"13802",title:"Prof.",name:"Xin",middleName:null,surname:"Wang",slug:"xin-wang",fullName:"Xin Wang"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"26",title:"Wireless Mesh Networks",subtitle:null,isOpenForSubmission:!1,hash:null,slug:"wireless-mesh-networks",bookSignature:"Nobuo Funabiki",coverURL:"https://cdn.intechopen.com/books/images_new/26.jpg",editedByType:"Edited by",editors:[{id:"15698",title:"Dr.",name:"Nobuo",middleName:null,surname:"Funabiki",slug:"nobuo-funabiki",fullName:"Nobuo Funabiki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:13,seriesByTopicCollection:[],seriesByTopicTotal:0,mostCitedChapters:[{id:"52822",doi:"10.5772/66048",title:"Non-Orthogonal Multiple Access (NOMA) for 5G Networks",slug:"non-orthogonal-multiple-access-noma-for-5g-networks",totalDownloads:14699,totalCrossrefCites:25,totalDimensionsCites:35,abstract:"In this chapter, we explore the concept of non-orthogonal multiple access (NOMA) scheme for the future radio access for 5G. We first provide the fundamentals of the technique for both downlink and uplink channels and then discuss optimizing the network capacity under fairness constraints. We further discuss the impacts of imperfect receivers on the performance of NOMA networks. Finally, we discuss the spectral efficiency (SE) of the networks that employ NOMA with its relations with energy efficiency (EE). We demonstrate that the networks with NOMA outperform other multiple access schemes in terms of sum capacity, EE and SE.",book:{id:"5480",slug:"towards-5g-wireless-networks-a-physical-layer-perspective",title:"Towards 5G Wireless Networks",fullTitle:"Towards 5G Wireless Networks - A Physical Layer Perspective"},signatures:"Refik Caglar Kizilirmak",authors:[{id:"188668",title:"Dr.",name:"Refik Caglar",middleName:null,surname:"Kizilirmak",slug:"refik-caglar-kizilirmak",fullName:"Refik Caglar Kizilirmak"}]},{id:"8493",doi:"10.5772/8006",title:"Monitoring Cold Chain Logistics by Means of RFID",slug:"monitoring-cold-chain-logistics-by-means-of-rfid",totalDownloads:8999,totalCrossrefCites:8,totalDimensionsCites:21,abstract:null,book:{id:"3341",slug:"sustainable-radio-frequency-identification-solutions",title:"Sustainable Radio Frequency Identification Solutions",fullTitle:"Sustainable Radio Frequency Identification Solutions"},signatures:"Luis Ruiz-Garcia and Loredana Lunadei",authors:null},{id:"12860",doi:"10.5772/13309",title:"Energy Issues and Energy Aware Routing in Wireless Ad Hoc Networks",slug:"energy-issues-and-energy-aware-routing-in-wireless-ad-hoc-networks",totalDownloads:4568,totalCrossrefCites:14,totalDimensionsCites:19,abstract:null,book:{id:"15",slug:"mobile-ad-hoc-networks-protocol-design",title:"Mobile Ad-Hoc Networks",fullTitle:"Mobile Ad-Hoc Networks: Protocol Design"},signatures:"Marco Fotino and Floriano De Rango",authors:[{id:"3066",title:"Dr.",name:"Floriano",middleName:null,surname:"De Rango",slug:"floriano-de-rango",fullName:"Floriano De Rango"},{id:"14362",title:"PhD.",name:"Marco",middleName:null,surname:"Fotino",slug:"marco-fotino",fullName:"Marco Fotino"}]},{id:"54645",doi:"10.5772/68088",title:"Power‐Over‐Fiber Applications for Telecommunications and for Electric Utilities",slug:"power-over-fiber-applications-for-telecommunications-and-for-electric-utilities",totalDownloads:2563,totalCrossrefCites:11,totalDimensionsCites:19,abstract:"Beyond telecommunications, optical fibers can also transport optical energy to powering electric or electronic devices remotely. This technique is called power over fiber (PoF). Besides the advantages of optical fiber (immunity to electromagnetic interferences and electrical insulation), the employment of a PoF scheme can eliminate the energy supplied by metallic cable and batteries located at remote sites, improving the reliability and the security of the system. Smart grid is a green field where PoF can be applied. Experts see smart grid as the output to a new technological level seeks to incorporate extensively technologies for sensing, monitoring, information technology, and telecommunications for the best performance electrical network. On the other hand, in telecommunications, PoF can be used in applications, such as remote antennas and extenders for passive optical networks (PONs). PoF can make them virtually passives. We reviewed the PoF concept, its main elements, technologies, and applications focusing in access networks and in smart grid developments made by the author’s research group.",book:{id:"5914",slug:"optical-fiber-and-wireless-communications",title:"Optical Fiber and Wireless Communications",fullTitle:"Optical Fiber and Wireless Communications"},signatures:"Joao Batista Rosolem",authors:[{id:"202012",title:"Dr.",name:"Joao",middleName:"Batista",surname:"Batista Rosolem",slug:"joao-batista-rosolem",fullName:"Joao Batista Rosolem"}]},{id:"8502",doi:"10.5772/8015",title:"RFID-based Information System for Patients and Medical Staff Identification and Tracking",slug:"rfid-based-information-system-for-patients-and-medical-staff-identification-and-tracking",totalDownloads:8682,totalCrossrefCites:6,totalDimensionsCites:15,abstract:null,book:{id:"3341",slug:"sustainable-radio-frequency-identification-solutions",title:"Sustainable Radio Frequency Identification Solutions",fullTitle:"Sustainable Radio Frequency Identification Solutions"},signatures:"Tudor Ioan Cerlinca, Cristina Turcu, Cornel Turcu and Marius Cerlinca",authors:null}],mostDownloadedChaptersLast30Days:[{id:"52822",title:"Non-Orthogonal Multiple Access (NOMA) for 5G Networks",slug:"non-orthogonal-multiple-access-noma-for-5g-networks",totalDownloads:14706,totalCrossrefCites:25,totalDimensionsCites:35,abstract:"In this chapter, we explore the concept of non-orthogonal multiple access (NOMA) scheme for the future radio access for 5G. We first provide the fundamentals of the technique for both downlink and uplink channels and then discuss optimizing the network capacity under fairness constraints. We further discuss the impacts of imperfect receivers on the performance of NOMA networks. Finally, we discuss the spectral efficiency (SE) of the networks that employ NOMA with its relations with energy efficiency (EE). We demonstrate that the networks with NOMA outperform other multiple access schemes in terms of sum capacity, EE and SE.",book:{id:"5480",slug:"towards-5g-wireless-networks-a-physical-layer-perspective",title:"Towards 5G Wireless Networks",fullTitle:"Towards 5G Wireless Networks - A Physical Layer Perspective"},signatures:"Refik Caglar Kizilirmak",authors:[{id:"188668",title:"Dr.",name:"Refik Caglar",middleName:null,surname:"Kizilirmak",slug:"refik-caglar-kizilirmak",fullName:"Refik Caglar Kizilirmak"}]},{id:"63215",title:"Smart Antenna Systems Model Simulation Design for 5G Wireless Network Systems",slug:"smart-antenna-systems-model-simulation-design-for-5g-wireless-network-systems",totalDownloads:2253,totalCrossrefCites:1,totalDimensionsCites:1,abstract:"The most recent antenna array technologies such as smart antenna systems (SAS) and massive multiple input multiple output (MIMO) systems are giving a strong increasing impact relative to 5G wireless communication systems due to benefits that they could introduce in terms of performance improvements with respect to omnidirectional antennas. Although a considerable number of theoretical proposals already exist in this field, the most common used network simulators do not implement the latest wireless network standards and, consequently, they do not offer the possibility to emulate scenarios in which SAS or massive MIMO systems are employed. This aspect heavily affects the quality of the network performance analysis with regard to the next generation wireless communication systems. To overcome this issue, it is possible, for example, to extend the default features offered by one of the most used network simulators such as Omnet++ which provides a very complete suite of network protocols and patterns that can be adapted in order to support the latest antenna array systems. The main goal of the present chapter is to illustrate the improvements accomplished in this field allowing to enhance the basic functionalities of the Omnet++ simulator by implementing the most modern antenna array technologies.",book:{id:"6844",slug:"array-pattern-optimization",title:"Array Pattern Optimization",fullTitle:"Array Pattern Optimization"},signatures:"Vincenzo Inzillo, Floriano De Rango, Luigi Zampogna and Alfonso A. Quintana",authors:null},{id:"52919",title:"Waveform Design Considerations for 5G Wireless Networks",slug:"waveform-design-considerations-for-5g-wireless-networks",totalDownloads:3399,totalCrossrefCites:1,totalDimensionsCites:2,abstract:"In this chapter, we first introduce new requirements of 5G wireless network and its differences from past generations. The question “Why do we need new waveforms?” is answered in these respects. In the following sections, time‐frequency (TF) lattice structure, pulse shaping, and multicarrier schemes are discussed in detail. TF lattice structures give information about TF localization of the pulse shape of employed filters. The structures are examined for multicarrier, single‐carrier, time‐division, and frequency‐division multiplexing schemes, comparatively. Dispersion on time and frequency response of these filters may cause interference among symbols and carriers. Thus, effects of different pulse shapes, their corresponding transceiver structures, and trade‐offs are given. Finally, performance evaluations of the selected waveform structures for 5G wireless communication systems are discussed.",book:{id:"5480",slug:"towards-5g-wireless-networks-a-physical-layer-perspective",title:"Towards 5G Wireless Networks",fullTitle:"Towards 5G Wireless Networks - A Physical Layer Perspective"},signatures:"Evren Çatak and Lütfiye Durak‐Ata",authors:[{id:"19414",title:"Prof.",name:"Lutfiye",middleName:null,surname:"Durak-Ata",slug:"lutfiye-durak-ata",fullName:"Lutfiye Durak-Ata"},{id:"189749",title:"M.Sc.",name:"Evren",middleName:null,surname:"Çatak",slug:"evren-catak",fullName:"Evren Çatak"}]},{id:"54645",title:"Power‐Over‐Fiber Applications for Telecommunications and for Electric Utilities",slug:"power-over-fiber-applications-for-telecommunications-and-for-electric-utilities",totalDownloads:2566,totalCrossrefCites:11,totalDimensionsCites:19,abstract:"Beyond telecommunications, optical fibers can also transport optical energy to powering electric or electronic devices remotely. This technique is called power over fiber (PoF). Besides the advantages of optical fiber (immunity to electromagnetic interferences and electrical insulation), the employment of a PoF scheme can eliminate the energy supplied by metallic cable and batteries located at remote sites, improving the reliability and the security of the system. Smart grid is a green field where PoF can be applied. Experts see smart grid as the output to a new technological level seeks to incorporate extensively technologies for sensing, monitoring, information technology, and telecommunications for the best performance electrical network. On the other hand, in telecommunications, PoF can be used in applications, such as remote antennas and extenders for passive optical networks (PONs). PoF can make them virtually passives. We reviewed the PoF concept, its main elements, technologies, and applications focusing in access networks and in smart grid developments made by the author’s research group.",book:{id:"5914",slug:"optical-fiber-and-wireless-communications",title:"Optical Fiber and Wireless Communications",fullTitle:"Optical Fiber and Wireless Communications"},signatures:"Joao Batista Rosolem",authors:[{id:"202012",title:"Dr.",name:"Joao",middleName:"Batista",surname:"Batista Rosolem",slug:"joao-batista-rosolem",fullName:"Joao Batista Rosolem"}]},{id:"75267",title:"Wireless Power Charging in Electrical Vehicles",slug:"wireless-power-charging-in-electrical-vehicles",totalDownloads:596,totalCrossrefCites:1,totalDimensionsCites:1,abstract:"Wireless Power Transfer (WPT) technology can transfer electrical energy from a transmitter to a receiver wirelessly. Due to its many advantages, WPT technology is a more adequate and suitable solution for many industrial applications compared to the power transfer by wires. Using WPT technology will reduce the annoyance of wires, improve the power transfer mechanisms. Recently, the WPT gain enormous attention to charging the on-board batteries of the Electric Vehicle (EV). Several well-known car manufacturing companies start efforts to adopt WPT technology and enhance its features. Therefore, WPT can be achieved through the affordable inductive coupling between two coils named a transmitter and a receiver coil. In EV charging applications, transmitter coils are located underneath the road, and receiver coils are installed in the EV. The inductive WPT of resonant type is generally applied to medium-high power transfer applications like EV charging because it achieves better energy efficiency. In this chapter, various WPT technologies are discussed and tested in EV wireless charging applications. Furthermore, extensive information is given to developing an advanced WPT technology that can transfer maximum power by achieving maximum efficiency.",book:{id:"10514",slug:"wireless-power-transfer-recent-development-applications-and-new-perspectives",title:"Wireless Power Transfer",fullTitle:"Wireless Power Transfer – Recent Development, Applications and New Perspectives"},signatures:"Nassim Iqteit, Khalid Yahya and Sajjad Ahmad Khan",authors:[{id:"270815",title:"Dr.",name:"Khalid",middleName:"O. Moh.",surname:"Yahya",slug:"khalid-yahya",fullName:"Khalid Yahya"},{id:"315602",title:"Dr.",name:"Nassim",middleName:null,surname:"Iqteit",slug:"nassim-iqteit",fullName:"Nassim Iqteit"},{id:"319848",title:"Dr.",name:"Sajjad",middleName:"Ahmad",surname:"Khan",slug:"sajjad-khan",fullName:"Sajjad Khan"}]}],onlineFirstChaptersFilter:{topicId:"761",limit:6,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},subscriptionForm:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[],offset:0,limit:8,total:null},allSeries:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:9,numberOfPublishedChapters:87,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:98,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:27,numberOfPublishedChapters:287,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:9,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:11,numberOfPublishedChapters:139,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:8,numberOfPublishedChapters:129,numberOfOpenTopics:0,numberOfUpcomingTopics:2,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!1},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:107,numberOfOpenTopics:3,numberOfUpcomingTopics:1,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:10,numberOfPublishedChapters:103,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:12,numberOfOpenTopics:2,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:0,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!1},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:0,numberOfPublishedChapters:10,numberOfOpenTopics:4,numberOfUpcomingTopics:1,issn:null,doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],testimonialsList:[{id:"13",text:"The collaboration with and support of the technical staff of IntechOpen is fantastic. The whole process of submitting an article and editing of the submitted article goes extremely smooth and fast, the number of reads and downloads of chapters is high, and the contributions are also frequently cited.",author:{id:"55578",name:"Antonio",surname:"Jurado-Navas",institutionString:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRisIQAS/Profile_Picture_1626166543950",slug:"antonio-jurado-navas",institution:{id:"720",name:"University of Malaga",country:{id:null,name:"Spain"}}}},{id:"6",text:"It is great to work with the IntechOpen to produce a worthwhile collection of research that also becomes a great educational resource and guide for future research endeavors.",author:{id:"259298",name:"Edward",surname:"Narayan",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/259298/images/system/259298.jpeg",slug:"edward-narayan",institution:{id:"3",name:"University of Queensland",country:{id:null,name:"Australia"}}}}]},series:{item:{id:"7",title:"Biomedical Engineering",doi:"10.5772/intechopen.71985",issn:"2631-5343",scope:"Biomedical Engineering is one of the fastest-growing interdisciplinary branches of science and industry. The combination of electronics and computer science with biology and medicine has improved patient diagnosis, reduced rehabilitation time, and helped to facilitate a better quality of life. Nowadays, all medical imaging devices, medical instruments, or new laboratory techniques result from the cooperation of specialists in various fields. The series of Biomedical Engineering books covers such areas of knowledge as chemistry, physics, electronics, medicine, and biology. This series is intended for doctors, engineers, and scientists involved in biomedical engineering or those wanting to start working in this field.",coverUrl:"https://cdn.intechopen.com/series/covers/7.jpg",latestPublicationDate:"May 13th, 2022",hasOnlineFirst:!0,numberOfPublishedBooks:12,editor:{id:"50150",title:"Prof.",name:"Robert",middleName:null,surname:"Koprowski",slug:"robert-koprowski",fullName:"Robert Koprowski",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYTYNQA4/Profile_Picture_1630478535317",biography:"Robert Koprowski, MD (1997), PhD (2003), Habilitation (2015), is an employee of the University of Silesia, Poland, Institute of Computer Science, Department of Biomedical Computer Systems. For 20 years, he has studied the analysis and processing of biomedical images, emphasizing the full automation of measurement for a large inter-individual variability of patients. Dr. Koprowski has authored more than a hundred research papers with dozens in impact factor (IF) journals and has authored or co-authored six books. Additionally, he is the author of several national and international patents in the field of biomedical devices and imaging. Since 2011, he has been a reviewer of grants and projects (including EU projects) in biomedical engineering.",institutionString:null,institution:{name:"University of Silesia",institutionURL:null,country:{name:"Poland"}}},editorTwo:null,editorThree:null},subseries:{paginationCount:3,paginationItems:[{id:"7",title:"Bioinformatics and Medical Informatics",coverUrl:"https://cdn.intechopen.com/series_topics/covers/7.jpg",isOpenForSubmission:!0,editor:{id:"351533",title:"Dr.",name:"Slawomir",middleName:null,surname:"Wilczynski",slug:"slawomir-wilczynski",fullName:"Slawomir Wilczynski",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000035U1loQAC/Profile_Picture_1630074514792",biography:"Professor Sławomir Wilczyński, Head of the Chair of Department of Basic Biomedical Sciences, Faculty of Pharmaceutical Sciences, Medical University of Silesia in Katowice, Poland. His research interests are focused on modern imaging methods used in medicine and pharmacy, including in particular hyperspectral imaging, dynamic thermovision analysis, high-resolution ultrasound, as well as other techniques such as EPR, NMR and hemispheric directional reflectance. Author of over 100 scientific works, patents and industrial designs. Expert of the Polish National Center for Research and Development, Member of the Investment Committee in the Bridge Alfa NCBiR program, expert of the Polish Ministry of Funds and Regional Policy, Polish Medical Research Agency. Editor-in-chief of the journal in the field of aesthetic medicine and dermatology - Aesthetica.",institutionString:null,institution:{name:"Medical University of Silesia",institutionURL:null,country:{name:"Poland"}}},editorTwo:null,editorThree:null},{id:"8",title:"Bioinspired Technology and Biomechanics",coverUrl:"https://cdn.intechopen.com/series_topics/covers/8.jpg",isOpenForSubmission:!0,editor:{id:"144937",title:"Prof.",name:"Adriano",middleName:"De Oliveira",surname:"Andrade",slug:"adriano-andrade",fullName:"Adriano Andrade",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRC8QQAW/Profile_Picture_1625219101815",biography:"Dr. Adriano de Oliveira Andrade graduated in Electrical Engineering at the Federal University of Goiás (Brazil) in 1997. He received his MSc and PhD in Biomedical Engineering respectively from the Federal University of Uberlândia (UFU, Brazil) in 2000 and from the University of Reading (UK) in 2005. He completed a one-year Post-Doctoral Fellowship awarded by the DFAIT (Foreign Affairs and International Trade Canada) at the Institute of Biomedical Engineering of the University of New Brunswick (Canada) in 2010. Currently, he is Professor in the Faculty of Electrical Engineering (UFU). He has authored and co-authored more than 200 peer-reviewed publications in Biomedical Engineering. He has been a researcher of The National Council for Scientific and Technological Development (CNPq-Brazil) since 2009. He has served as an ad-hoc consultant for CNPq, CAPES (Coordination for the Improvement of Higher Education Personnel), FINEP (Brazilian Innovation Agency), and other funding bodies on several occasions. He was the Secretary of the Brazilian Society of Biomedical Engineering (SBEB) from 2015 to 2016, President of SBEB (2017-2018) and Vice-President of SBEB (2019-2020). He was the head of the undergraduate program in Biomedical Engineering of the Federal University of Uberlândia (2015 - June/2019) and the head of the Centre for Innovation and Technology Assessment in Health (NIATS/UFU) since 2010. He is the head of the Postgraduate Program in Biomedical Engineering (UFU, July/2019 - to date). He was the secretary of the Parkinson's Disease Association of Uberlândia (2018-2019). Dr. Andrade's primary area of research is focused towards getting information from the neuromuscular system to understand its strategies of organization, adaptation and controlling in the context of motor neuron diseases. His research interests include Biomedical Signal Processing and Modelling, Assistive Technology, Rehabilitation Engineering, Neuroengineering and Parkinson's Disease.",institutionString:null,institution:{name:"Federal University of Uberlândia",institutionURL:null,country:{name:"Brazil"}}},editorTwo:null,editorThree:null},{id:"9",title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering",coverUrl:"https://cdn.intechopen.com/series_topics/covers/9.jpg",isOpenForSubmission:!0,editor:{id:"126286",title:"Dr.",name:"Luis",middleName:"Jesús",surname:"Villarreal-Gómez",slug:"luis-villarreal-gomez",fullName:"Luis Villarreal-Gómez",profilePictureURL:"https://mts.intechopen.com/storage/users/126286/images/system/126286.jpg",biography:"Dr. Luis Villarreal is a research professor from the Facultad de Ciencias de la Ingeniería y Tecnología, Universidad Autónoma de Baja California, Tijuana, Baja California, México. Dr. Villarreal is the editor in chief and founder of the Revista de Ciencias Tecnológicas (RECIT) (https://recit.uabc.mx/) and is a member of several editorial and reviewer boards for numerous international journals. He has published more than thirty international papers and reviewed more than ninety-two manuscripts. His research interests include biomaterials, nanomaterials, bioengineering, biosensors, drug delivery systems, and tissue engineering.",institutionString:null,institution:{name:"Autonomous University of Baja California",institutionURL:null,country:{name:"Mexico"}}},editorTwo:null,editorThree:null}]},overviewPageOFChapters:{paginationCount:17,paginationItems:[{id:"81751",title:"NanoBioSensors: From Electrochemical Sensors Improvement to Theranostic Applications",doi:"10.5772/intechopen.102552",signatures:"Anielle C.A. Silva, Eliete A. Alvin, Lais S. de Jesus, Caio C.L. de França, Marílya P.G. da Silva, Samaysa L. Lins, Diógenes Meneses, Marcela R. Lemes, Rhanoica O. Guerra, Marcos V. da Silva, Carlo J.F. de Oliveira, Virmondes Rodrigues Junior, Renata M. Etchebehere, Fabiane C. de Abreu, Bruno G. Lucca, Sanívia A.L. Pereira, Rodrigo C. Rosa and Noelio O. Dantas",slug:"nanobiosensors-from-electrochemical-sensors-improvement-to-theranostic-applications",totalDownloads:4,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Biosignal Processing",coverURL:"https://cdn.intechopen.com/books/images_new/11153.jpg",subseries:{id:"7",title:"Bioinformatics and Medical Informatics"}}},{id:"81766",title:"Evolution of Organoids in Oncology",doi:"10.5772/intechopen.104251",signatures:"Allen Thayakumar Basanthakumar, Janitha Chandrasekhar Darlybai and Jyothsna Ganesh",slug:"evolution-of-organoids-in-oncology",totalDownloads:6,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Organoids",coverURL:"https://cdn.intechopen.com/books/images_new/11430.jpg",subseries:null}},{id:"81678",title:"Developmental Studies on Practical Enzymatic Phosphate Ion Biosensors and Microbial BOD Biosensors, and New Insights into the Future Perspectives of These Biosensor Fields",doi:"10.5772/intechopen.104377",signatures:"Hideaki Nakamura",slug:"developmental-studies-on-practical-enzymatic-phosphate-ion-biosensors-and-microbial-bod-biosensors-a",totalDownloads:3,totalCrossrefCites:0,totalDimensionsCites:0,authors:[{name:"Hideaki",surname:"Nakamura"}],book:{title:"Biosignal Processing",coverURL:"https://cdn.intechopen.com/books/images_new/11153.jpg",subseries:{id:"7",title:"Bioinformatics and Medical Informatics"}}},{id:"81547",title:"Organoids and Commercialization",doi:"10.5772/intechopen.104706",signatures:"Anubhab Mukherjee, Aprajita Sinha, Maheshree Maibam, Bharti Bisht and Manash K. Paul",slug:"organoids-and-commercialization",totalDownloads:30,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Organoids",coverURL:"https://cdn.intechopen.com/books/images_new/11430.jpg",subseries:null}}]},overviewPagePublishedBooks:{paginationCount:12,paginationItems:[{type:"book",id:"6692",title:"Medical and Biological Image Analysis",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/6692.jpg",slug:"medical-and-biological-image-analysis",publishedDate:"July 4th 2018",editedByType:"Edited by",bookSignature:"Robert Koprowski",hash:"e75f234a0fc1988d9816a94e4c724deb",volumeInSeries:1,fullTitle:"Medical and Biological Image Analysis",editors:[{id:"50150",title:"Prof.",name:"Robert",middleName:null,surname:"Koprowski",slug:"robert-koprowski",fullName:"Robert Koprowski",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYTYNQA4/Profile_Picture_1630478535317",biography:"Robert Koprowski, MD (1997), PhD (2003), Habilitation (2015), is an employee of the University of Silesia, Poland, Institute of Computer Science, Department of Biomedical Computer Systems. For 20 years, he has studied the analysis and processing of biomedical images, emphasizing the full automation of measurement for a large inter-individual variability of patients. Dr. Koprowski has authored more than a hundred research papers with dozens in impact factor (IF) journals and has authored or co-authored six books. Additionally, he is the author of several national and international patents in the field of biomedical devices and imaging. Since 2011, he has been a reviewer of grants and projects (including EU projects) in biomedical engineering.",institutionString:null,institution:{name:"University of Silesia",institutionURL:null,country:{name:"Poland"}}}]},{type:"book",id:"7218",title:"OCT",subtitle:"Applications in Ophthalmology",coverURL:"https://cdn.intechopen.com/books/images_new/7218.jpg",slug:"oct-applications-in-ophthalmology",publishedDate:"September 19th 2018",editedByType:"Edited by",bookSignature:"Michele Lanza",hash:"e3a3430cdfd6999caccac933e4613885",volumeInSeries:2,fullTitle:"OCT - Applications in Ophthalmology",editors:[{id:"240088",title:"Prof.",name:"Michele",middleName:null,surname:"Lanza",slug:"michele-lanza",fullName:"Michele Lanza",profilePictureURL:"https://mts.intechopen.com/storage/users/240088/images/system/240088.png",biography:"Michele Lanza is Associate Professor of Ophthalmology at Università della Campania, Luigi Vanvitelli, Napoli, Italy. His fields of interest are anterior segment disease, keratoconus, glaucoma, corneal dystrophies, and cataracts. His research topics include\nintraocular lens power calculation, eye modification induced by refractive surgery, glaucoma progression, and validation of new diagnostic devices in ophthalmology. \nHe has published more than 100 papers in international and Italian scientific journals, more than 60 in journals with impact factors, and chapters in international and Italian books. He has also edited two international books and authored more than 150 communications or posters for the most important international and Italian ophthalmology conferences.",institutionString:'University of Campania "Luigi Vanvitelli"',institution:{name:'University of Campania "Luigi Vanvitelli"',institutionURL:null,country:{name:"Italy"}}}]},{type:"book",id:"7560",title:"Non-Invasive Diagnostic Methods",subtitle:"Image Processing",coverURL:"https://cdn.intechopen.com/books/images_new/7560.jpg",slug:"non-invasive-diagnostic-methods-image-processing",publishedDate:"December 19th 2018",editedByType:"Edited by",bookSignature:"Mariusz Marzec and Robert Koprowski",hash:"d92fd8cf5a90a47f2b8a310837a5600e",volumeInSeries:3,fullTitle:"Non-Invasive Diagnostic Methods - Image Processing",editors:[{id:"253468",title:"Dr.",name:"Mariusz",middleName:null,surname:"Marzec",slug:"mariusz-marzec",fullName:"Mariusz Marzec",profilePictureURL:"https://mts.intechopen.com/storage/users/253468/images/system/253468.png",biography:"An assistant professor at Department of Biomedical Computer Systems, at Institute of Computer Science, Silesian University in Katowice. Scientific interests: computer analysis and processing of images, biomedical images, databases and programming languages. He is an author and co-author of scientific publications covering analysis and processing of biomedical images and development of database systems.",institutionString:"University of Silesia",institution:null}]},{type:"book",id:"6843",title:"Biomechanics",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/6843.jpg",slug:"biomechanics",publishedDate:"January 30th 2019",editedByType:"Edited by",bookSignature:"Hadi Mohammadi",hash:"85132976010be1d7f3dbd88662b785e5",volumeInSeries:4,fullTitle:"Biomechanics",editors:[{id:"212432",title:"Prof.",name:"Hadi",middleName:null,surname:"Mohammadi",slug:"hadi-mohammadi",fullName:"Hadi Mohammadi",profilePictureURL:"https://mts.intechopen.com/storage/users/212432/images/system/212432.jpeg",biography:"Dr. Hadi Mohammadi is a biomedical engineer with hands-on experience in the design and development of many engineering structures and medical devices through various projects that he has been involved in over the past twenty years. Dr. Mohammadi received his BSc. and MSc. degrees in Mechanical Engineering from Sharif University of Technology, Tehran, Iran, and his PhD. degree in Biomedical Engineering (biomaterials) from the University of Western Ontario. He was a postdoctoral trainee for almost four years at University of Calgary and Harvard Medical School. He is an industry innovator having created the technology to produce lifelike synthetic platforms that can be used for the simulation of almost all cardiovascular reconstructive surgeries. He’s been heavily involved in the design and development of cardiovascular devices and technology for the past 10 years. He is currently an Assistant Professor with the University of British Colombia, Canada.",institutionString:"University of British Columbia",institution:{name:"University of British Columbia",institutionURL:null,country:{name:"Canada"}}}]}]},openForSubmissionBooks:{},onlineFirstChapters:{},subseriesFiltersForOFChapters:[],publishedBooks:{},subseriesFiltersForPublishedBooks:[],publicationYearFilters:[],authors:{}},subseries:{item:{id:"25",type:"subseries",title:"Evolutionary Computation",keywords:"Genetic Algorithms, Genetic Programming, Evolutionary Programming, Evolution Strategies, Hybrid Algorithms, Bioinspired Metaheuristics, Ant Colony Optimization, Evolutionary Learning, Hyperparameter Optimization",scope:"Evolutionary computing is a paradigm that has grown dramatically in recent years. This group of bio-inspired metaheuristics solves multiple optimization problems by applying the metaphor of natural selection. It so far has solved problems such as resource allocation, routing, schedule planning, and engineering design. Moreover, in the field of machine learning, evolutionary computation has carved out a significant niche both in the generation of learning models and in the automatic design and optimization of hyperparameters in deep learning models. This collection aims to include quality volumes on various topics related to evolutionary algorithms and, alternatively, other metaheuristics of interest inspired by nature. For example, some of the issues of interest could be the following: Advances in evolutionary computation (Genetic algorithms, Genetic programming, Bio-inspired metaheuristics, Hybrid metaheuristics, Parallel ECs); Applications of evolutionary algorithms (Machine learning and Data Mining with EAs, Search-Based Software Engineering, Scheduling, and Planning Applications, Smart Transport Applications, Applications to Games, Image Analysis, Signal Processing and Pattern Recognition, Applications to Sustainability).",coverUrl:"https://cdn.intechopen.com/series_topics/covers/25.jpg",hasOnlineFirst:!1,hasPublishedBooks:!0,annualVolume:11421,editor:{id:"136112",title:"Dr.",name:"Sebastian",middleName:null,surname:"Ventura Soto",slug:"sebastian-ventura-soto",fullName:"Sebastian Ventura Soto",profilePictureURL:"https://mts.intechopen.com/storage/users/136112/images/system/136112.png",biography:"Sebastian Ventura is a Spanish researcher, a full professor with the Department of Computer Science and Numerical Analysis, University of Córdoba. Dr Ventura also holds the positions of Affiliated Professor at Virginia Commonwealth University (Richmond, USA) and Distinguished Adjunct Professor at King Abdulaziz University (Jeddah, Saudi Arabia). Additionally, he is deputy director of the Andalusian Research Institute in Data Science and Computational Intelligence (DaSCI) and heads the Knowledge Discovery and Intelligent Systems Research Laboratory. He has published more than ten books and over 300 articles in journals and scientific conferences. Currently, his work has received over 18,000 citations according to Google Scholar, including more than 2200 citations in 2020. In the last five years, he has published more than 60 papers in international journals indexed in the JCR (around 70% of them belonging to first quartile journals) and he has edited some Springer books “Supervised Descriptive Pattern Mining” (2018), “Multiple Instance Learning - Foundations and Algorithms” (2016), and “Pattern Mining with Evolutionary Algorithms” (2016). He has also been involved in more than 20 research projects supported by the Spanish and Andalusian governments and the European Union. He currently belongs to the editorial board of PeerJ Computer Science, Information Fusion and Engineering Applications of Artificial Intelligence journals, being also associate editor of Applied Computational Intelligence and Soft Computing and IEEE Transactions on Cybernetics. Finally, he is editor-in-chief of Progress in Artificial Intelligence. He is a Senior Member of the IEEE Computer, the IEEE Computational Intelligence, and the IEEE Systems, Man, and Cybernetics Societies, and the Association of Computing Machinery (ACM). Finally, his main research interests include data science, computational intelligence, and their applications.",institutionString:null,institution:{name:"University of Córdoba",institutionURL:null,country:{name:"Spain"}}},editorTwo:null,editorThree:null,series:{id:"14",title:"Artificial Intelligence",doi:"10.5772/intechopen.79920",issn:"2633-1403"},editorialBoard:[{id:"111683",title:"Prof.",name:"Elmer P.",middleName:"P.",surname:"Dadios",slug:"elmer-p.-dadios",fullName:"Elmer P. Dadios",profilePictureURL:"https://mts.intechopen.com/storage/users/111683/images/system/111683.jpg",institutionString:"De La Salle University",institution:{name:"De La Salle University",institutionURL:null,country:{name:"Philippines"}}},{id:"106873",title:"Prof.",name:"Hongwei",middleName:null,surname:"Ge",slug:"hongwei-ge",fullName:"Hongwei Ge",profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institutionString:null,institution:{name:"Dalian University of Technology",institutionURL:null,country:{name:"China"}}},{id:"171056",title:"Dr.",name:"Sotirios",middleName:null,surname:"Goudos",slug:"sotirios-goudos",fullName:"Sotirios Goudos",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bS9IuQAK/Profile_Picture_1622623673666",institutionString:null,institution:{name:"Aristotle University of Thessaloniki",institutionURL:null,country:{name:"Greece"}}},{id:"15895",title:"Assistant Prof.",name:"Takashi",middleName:null,surname:"Kuremoto",slug:"takashi-kuremoto",fullName:"Takashi Kuremoto",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYLrqQAG/Profile_Picture_1625656196038",institutionString:null,institution:{name:"Nippon Institute of Technology",institutionURL:null,country:{name:"Japan"}}},{id:"125844",title:"Prof.",name:"Wellington",middleName:"Pinheiro Dos",surname:"Santos",slug:"wellington-santos",fullName:"Wellington Santos",profilePictureURL:"https://mts.intechopen.com/storage/users/125844/images/4878_n.jpg",institutionString:null,institution:{name:"Federal University of Pernambuco",institutionURL:null,country:{name:"Brazil"}}}]},onlineFirstChapters:{paginationCount:13,paginationItems:[{id:"81566",title:"New and Emerging Technologies for Integrative Ambulatory Autonomic Assessment and Intervention as a Catalyst in the Synergy of Remote Geocoded Biosensing, Algorithmic Networked Cloud Computing, Deep Learning, and Regenerative/Biomic Medicine: Further Real",doi:"10.5772/intechopen.104092",signatures:"Robert L. Drury",slug:"new-and-emerging-technologies-for-integrative-ambulatory-autonomic-assessment-and-intervention-as-a-",totalDownloads:9,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"81286",title:"Potassium Derangements: A Pathophysiological Review, Diagnostic Approach, and Clinical Management",doi:"10.5772/intechopen.103016",signatures:"Sairah Sharif and Jie Tang",slug:"potassium-derangements-a-pathophysiological-review-diagnostic-approach-and-clinical-management",totalDownloads:24,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Potassium in Human Health",coverURL:"https://cdn.intechopen.com/books/images_new/10794.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"80895",title:"Heart Rate Variability as a Marker of Homeostatic Level",doi:"10.5772/intechopen.102500",signatures:"Moacir Fernandes de Godoy and Michele Lima Gregório",slug:"heart-rate-variability-as-a-marker-of-homeostatic-level",totalDownloads:25,totalCrossrefCites:0,totalDimensionsCites:0,authors:[{name:"Moacir",surname:"Godoy"},{name:"Michele",surname:"Gregório"}],book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"80433",title:"Heart Autonomic Nervous System: Basic Science and Clinical Implications",doi:"10.5772/intechopen.101718",signatures:"Elvan Wiyarta and Nayla Karima",slug:"heart-autonomic-nervous-system-basic-science-and-clinical-implications",totalDownloads:49,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"80316",title:"Central Control of the Larynx in Mammals",doi:"10.5772/intechopen.102009",signatures:"Manuel Víctor López-González, Marta González-García, Laura Carrillo-Franco, Amelia Díaz-Casares and Marc Stefan Dawid-Milner",slug:"central-control-of-the-larynx-in-mammals",totalDownloads:36,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"80402",title:"General Anesthesia and Autonomic Nervous System: Control and Management in Neurosurgery",doi:"10.5772/intechopen.101829",signatures:"Irina Alexandrovna Savvina, Anna Olegovna Petrova and Yulia Mikhailovna Zabrodskaya",slug:"general-anesthesia-and-autonomic-nervous-system-control-and-management-in-neurosurgery",totalDownloads:58,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"80035",title:"Healthy Lifestyle, Autonomic Nervous System Activity, and Sleep Status for Healthy Aging",doi:"10.5772/intechopen.101837",signatures:"Miki Sato, Feni Betriana, Ryuichi Tanioka, Kyoko Osaka, Tetsuya Tanioka and Savina Schoenhofer",slug:"healthy-lifestyle-autonomic-nervous-system-activity-and-sleep-status-for-healthy-aging",totalDownloads:60,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"80175",title:"Signaling Pathways Regulating Axogenesis and Dendritogenesis in Sympathetic Neurons",doi:"10.5772/intechopen.102442",signatures:"Vidya Chandrasekaran",slug:"signaling-pathways-regulating-axogenesis-and-dendritogenesis-in-sympathetic-neurons",totalDownloads:66,totalCrossrefCites:0,totalDimensionsCites:0,authors:[{name:"Vidya",surname:"Chandrasekaran"}],book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"80176",title:"Impacts of Environmental Stressors on Autonomic Nervous System",doi:"10.5772/intechopen.101842",signatures:"Mayowa Adeniyi",slug:"impacts-of-environmental-stressors-on-autonomic-nervous-system",totalDownloads:66,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"79655",title:"The Autonomic Nervous System, Sex Differences, and Chronobiology under General Anesthesia in In Vivo Experiments Involving Rats",doi:"10.5772/intechopen.101075",signatures:"Pavol Svorc Jr and Pavol Svorc",slug:"the-autonomic-nervous-system-sex-differences-and-chronobiology-under-general-anesthesia-in-in-vivo-e",totalDownloads:91,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Autonomic Nervous System - Special Interest Topics",coverURL:"https://cdn.intechopen.com/books/images_new/10835.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"79194",title:"Potassium in Solid Cancers",doi:"10.5772/intechopen.101108",signatures:"Jessica Iorio, Lisa Lastraioli and Elena Lastraioli",slug:"potassium-in-solid-cancers",totalDownloads:119,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Potassium in Human Health",coverURL:"https://cdn.intechopen.com/books/images_new/10794.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"78820",title:"Potassium Homeostasis",doi:"10.5772/intechopen.100368",signatures:"Shakuntala S. Patil and Sachin M. Patil",slug:"potassium-homeostasis",totalDownloads:108,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Potassium in Human Health",coverURL:"https://cdn.intechopen.com/books/images_new/10794.jpg",subseries:{id:"12",title:"Human Physiology"}}},{id:"78193",title:"Potassium and Cardiac Surgery",doi:"10.5772/intechopen.99735",signatures:"Shawn Kant, Frank W. Sellke and Jun Feng",slug:"potassium-and-cardiac-surgery",totalDownloads:175,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Potassium in Human Health",coverURL:"https://cdn.intechopen.com/books/images_new/10794.jpg",subseries:{id:"12",title:"Human Physiology"}}}]},publishedBooks:{},testimonialsList:[{id:"8",text:"I work with IntechOpen for a number of reasons: their professionalism, their mission in support of Open Access publishing, and the quality of their peer-reviewed publications, but also because they believe in equality.",author:{id:"202192",name:"Catrin",surname:"Rutland",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",slug:"catrin-rutland",institution:{id:"134",name:"University of Nottingham",country:{id:null,name:"United Kingdom"}}}},{id:"18",text:"It was great publishing with IntechOpen, the process was straightforward and I had support all along.",author:{id:"71579",name:"Berend",surname:"Olivier",institutionString:"Utrecht University",profilePictureURL:"https://mts.intechopen.com/storage/users/71579/images/system/71579.jpg",slug:"berend-olivier",institution:{id:"253",name:"Utrecht University",country:{id:null,name:"Netherlands"}}}},{id:"27",text:"The opportunity to work with a prestigious publisher allows for the possibility to collaborate with more research groups interested in animal nutrition, leading to the development of new feeding strategies and food valuation while being more sustainable with the environment, allowing more readers to learn about the subject.",author:{id:"175967",name:"Manuel",surname:"Gonzalez Ronquillo",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/175967/images/system/175967.png",slug:"manuel-gonzalez-ronquillo",institution:{id:"6221",name:"Universidad Autónoma del Estado de México",country:{id:null,name:"Mexico"}}}}]},submityourwork:{pteSeriesList:[],lsSeriesList:[],hsSeriesList:[],sshSeriesList:[],subseriesList:[],annualVolumeBook:{},thematicCollection:[],selectedSeries:null,selectedSubseries:null},seriesLanding:{item:null},libraryRecommendation:{success:null,errors:{},institutions:[]},route:{name:"profile.detail",path:"/profiles/219774",hash:"",query:{},params:{id:"219774"},fullPath:"/profiles/219774",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()