Chapters authored
Optimization Approach for Inverse Kinematic Solution
Inverse kinematics of serial or parallel manipulators can be computed from given Cartesian position and orientation of end effector and reverse of this would yield forward kinematics. Which is nothing but finding out end effector coordinates and angles from given joint angles. Forward kinematics of serial manipulators gives exact solution while inverse kinematics yields number of solutions. The complexity of inverse kinematic solution arises with the increment of degrees of freedom. Therefore it would be desired to adopt optimization techniques. Although the optimization techniques gives number of solution for inverse kinematics problem but it converses the best solution for the minimum function value. The selection of suitable optimization method will provides the global optimization solution, therefore, in this paper proposes quaternion derivation for 5R manipulator inverse kinematic solution which is later compared with teachers learner based optimization (TLBO) and genetic algorithm (GA) for the optimum convergence rate of inverse kinematic solution. An investigation has been made on the accuracies of adopted techniques and total computational time for inverse kinematic evaluations. It is found that TLBO is performing better as compared GA on the basis of fitness function and quaternion algebra gives better computational cost.
Part of the book: Kinematics