Idza Riati Ibrahim

By Ismayadi Ismail, Idza Riati Ibrahim and Rodziah Nazlan

Microstructure of magnetic materials greatly influences the performance of magnetic properties, and sintering has been used as an agent to tailor the microstructure of these magnetic materials especially ferrites. Nanostructured ferrites prepared by high-energy milling method are often inherently unstable owing to their small constituent sizes, non-equilibrium cation distribution, disordered spin configuration, and high chemical activity. Therefore, sintering of the milled ferrites recrystallizes the nanostructure and causes its transition from an excited metastable (activated) state into the low-energy crystalline state. A better understanding of the response of nanoscale ferrites with changes in temperature is crucial not only for basic science (the development of an atomistic and microscopic theory of the mechanochemical processes) but also because of the technological high-temperature applications in catalysis, ferrofluids and information storage. This chapter discusses on two different sintering schemes, which are a commonly applied multi-sample sintering and a rarely adopted single-sample sintering. Experimental results of single-sample and multi-sample sintering of NiZn ferrites and yttrium iron garnet (YIG) were highlighted, and their microstructural consequences on the magnetic properties were also discussed.

Part of the book: Sintering of Functional Materials