Non-traditional design of multi-layered solar energy converters is proposed, with electrically independent p-i-n junctions. This new approach allows utilization of cheap and abundant II-VI, IV and IV-VI materials instead of III-V ones, using also cheap and economic deposition techniques like Chemical Bath Deposition (CBD) or Chemical Vapor Deposition (CVD) instead of expensive Molecular Beam Epitaxy (MBE). The CVD reactor with three atomic sources was built and used. II-VI and IV-VI semiconductor materials were prepared either in CVD reactor, or by CBD techniques. Besides, the original two-stage technology was employed: first the precursor oxide/hydroxide film of corresponding metal (like cadmium oxide/hydroxide) was prepared by some variety of CBD methods, and at the second stage, in CVD reactor the non-metallic component of precursor film was substituted by chalcogen, producing materials like CdS, CdSe, PbTe, etc. The semiconductor materials thus produced were of high quality, with basic parameters corresponding to those for the single crystals. Several experimental multilayered converters were constructed (in particular, with CdS/CdTe, CdS/PbS and Si/PbTe active bilayers). The preliminary results of their studying have shown that these and similar devices can be used in solar cells and photo sensors with satisfactory efficiency, and have great potential for improvement.
Part of the book: Sustainable Energy
The possibility of preparing materials based on quantum dots with fine-tuned magnetic properties has opened up the door for designing new and more efficient devices where the interplay of different microscopic phenomena balances out in useful ways. Nevertheless, our knowledge of the precise interaction of complex objects built from a great number of such nanometric magnetic components is still limited. The investigation of the spin or magnetization dynamics in such materials represents an important opportunity to better comprehend and predict some missing pieces for the advancement of a great deal of promising technologies.
Part of the book: Nonmagnetic and Magnetic Quantum Dots