Stability metrics comparison for lifetime monitoring.
\r\n\tUnstoppable progress in the technologies of synthesis of diamond, graphene, and its compounds with stable parameters will provide materials for the industry of devices for integrated, radio, Opto- and quantum electronics and photonics.
\r\n\tIn most electronic and optical properties, diamond and graphene are superior to traditional and perspective semiconductors. It is safe to say that silicon and gallium arsenide are materials for electronics and optoelectronics of the past, gallium nitride and silicon carbide are high-tech today, and diamond and graphene are the future of electronics and photonics.
CMOS technology has been adopted by the digital IC market for a wide range of applications from high-performance computing and graphics to mobile applications, wearable electronics and IoT applications. Technology scaling has been constantly evolving offering new opportunities to adapt each technology node to new challenging applications. Modern multi-core system trends result in a significant percentage of the total die area being dedicated to memory blocks. As larger densities of static memories are embedded inside complex SoC designs, analyzing memory reliability becomes more critical, as it may be an important source of the overall system error rate. For instance, the contribution of the SRAM parameter variability dominates the overall circuit parameter characteristics, including leakage and yield [1]. In addition, a deep knowledge and analysis about the SRAM cell noise margin and the impact of physical parameters variation is therefore becoming a must in modern CMOS designs.
The IC technologies have been constantly and aggressively scaled down due to efficient computation requirements. The critical dimension reduction in poly and diffusion features entails an increase in statistical physical parameters variation in the transistor parameters: threshold voltage (Vth), channel length, and mobility [2]. In this sense, embedded SRAM circuits are becoming more vulnerable because memory cells are scaled near the minimum available size in each technology node and the power supply is reduced. In this scenario, memory failures are drastically increasing due to higher device parameter variability, more defect density and new reliability mechanisms [3]. This has a direct impact on many parameters like SRAM performance, bit density, VDDmin, leakage, dynamic power reduction, yield and failure probability. In addition, new reliability mechanisms may produce changes in the initial statistical parameter variability depending on user workload application, boosting the emergence of failures in field like bias temperature instability [4, 5].
The initial memory cell parameter variability profile due to fabrication process is defined using a combination of metrics. The most used ones are: the cell stability metrics (noise margins), the functional access time, the power consumption profile and the minimum VDD. Due to the reliability degradation mechanisms, mainly due to Vth drift, the initial profile may change dramatically while the circuit is on field, increasing the functional failure probability and/or lowering the circuit performance profile.
Traditionally, on field circuit reliability effects have been minimized using several techniques at the design step. The first common methodology to reduce vulnerability of memory cells is based on introducing some reliability safety margins by design, in addition to the variability guard bands needed to overcome process variation issues. These margins lead to some cost in terms of performance, consumption or area. A second mitigation alternative has been proposed in the literature based on including operational assistance circuits, like read and write assist circuits introduced in memories to assure fault-free operations [5, 6, 7]. In more recent approaches, adaptive solutions are also proposed to mitigate BTI effects recovering the Vth drift [8]. These approaches involve memory modification to include additional adaptive circuits that in some scenarios have demonstrated to contribute to increase the functional failure probability [6, 7]. Therefore, in some applications, it may be important to periodically monitor the profile changes to detect which memory cells are likely to fail in the near future, and try to take some decision to avoid the failure [9]. The objective is to reduce the failure in time rate, and to improve the overall system reliability while remaining compatible with assist techniques or improved memory cell designs.
The next sections will review the conventional and novel SRAM noise metrics proposed in the literature and their suitability as observable parameters to estimate the threshold voltage (Vth) drift of 6T-based SRAM cells. The stability metrics will be analyzed and compared keeping in mind their suitability to be used in an implementable built-in monitor architecture. It is well known that the Vth variability is caused by process variation and reliability mechanisms but the implementation of a direct Vth measurement built-in monitor without affecting the memory array performance is difficult due to the need of internal memory-array node accessibility. Therefore, this approach analyses the stability metrics defined in the literature and proposes a built-in monitor architecture taking profit of their feasibility to measure and track the evolution of the memory cell effects due to reliability mechanism by observing the effect of the stability margin drift caused by the Vth drift.
A typical SRAM is designed as a memory-cell matrix organized in N rows and M columns, see Figure 1. The SRAM performs three operations: Hold, Read and Write. The hold operation consists in storing the cell values and remains unaltered while the memory is powered on. The read operation accesses to a specific memory cell to read-out the value stored without destroy it. Finally, the write operation updates the stored value in a concrete memory cell changing the previous value.
Typical SRAM internal organization with the main parts.
During an operation, the row and column decoders translate the memory address into an internal cell matrix position. The row address identifies only one row (shadowed row in Figure 1) during a read/write access. The column address selects which specific cell from the selected row is actually read-out or write-in (dark cell in Figure 1). Finally, the read/write circuits perform the read/write operation to the selected memory cell.
While the memory cell addressed by the row and column decoder is the “selected” cell because both decoders point out the cell, the rest of the row cells are the “Half-Selected” cells, because only the row decoder is pointing out them but the read/write circuits have not access to those memory cells. In each read/write operation, there are M-1 half-selected cells for each selected cell. The presence of half-selected cells is important to understand why read operation is considered during the cell design as the weakest operation in terms of memory stability [10].
The conventional 6T SRAM memory cell is formed by two cross-coupled CMOS inverters connected to the complementary bit-lines through two pass transistors. Figure 2 shows this well-known memory cell and the main signals to perform read/write operations. Following the matrix distribution showed in Figure 1, all cells in the same row share the word line (WL in Figure 2) signal that is connected to the corresponding output of the row decoder. In the same way, all cells in the same column share the bit-lines (BLL and BLR in Figure 2) forming the column signals to the read/write circuits, see Figure 1.
The six CMOS transistors SRAM cell schematic (6T).
The access transistors have their gate node connected to the WL to open or close the connection of internal cell nodes (VL and VR in Figure 2) to the bit-lines (BLL and BLR respectively in Figure 2). So, bit-lines act as input/output nodes carrying the data from the selected cell to the read circuits in a read operation, or from write circuits to the selected cell in a write operation.
During the hold period the memory cell maintains a stable value due to the feedback reinforcement of cross-coupled inverters. The WL signal remain low, the BLL and BLR signals are high (are pre-charged waiting for the next operation) and the memory cell has their internals nodes disconnected from the bit-lines.
A read operation is performed connecting the internal memory nodes to both bit-lines pre-charged to high value. The internal node (VL or VR) at low value discharges the connected bit-line (BLL or BLR) though the voltage divider formed by the access transistor and the pull-down transistor (MNL or MNR in Figure 2). The read circuit senses and amplifies the difference between both bit-lines and the read-out value is latched.
A write operation starts when the write circuits set up the bit-lines with the adequate complementary value to write (BLL with the data value, and BLR with the complementary data value or vice versa). Then, the WL connects the selected memory cell to the bit-lines and the external values force the update of the stored value. In this case, the new value is written though the voltage divider formed by the access transistor and the pull-up transistors (MPL or MPR in Figure 2). Finally, the memory cell is disconnected from the bit-lines and the new value is stored.
When the memory is performing a write operation on a selected memory cell, there are half-selected memory cells that operate like in a read operation. These cells share the same word-line than the cell which is actually being written, for this reason, their internal nodes are connected to the bit-lines, which sense the cell stored value as in a read operation. In this situation, the cell is in its worst-case cell stability mode as it is reported in [11, 12]. In general, the read operation is more critical that write operation, and the presence of half-selected cells has motivated that the read vulnerability is guaranteed with bigger guard bands in exchange for writability degradation.
Stability has been used for years as a useful metric to optimize the design of SRAM cells and predict the effect of parameter variation. Cell stability has been traditionally obtained by computing the noise margins for each memory operation. The noise margins represent the quantification of the cell ability to tolerate a certain presence of noise (in terms of current or voltage). This section will introduce the proposed noise margins considering the kind of nodes involved in the measurement: Internal cell nodes or External cell nodes. In both cases, noise margins will be organized in terms of the measured electrical variable (voltage, current or digital value) and the operation performed (read or write).
The stability defined from the noise metrics on internal cell nodes tries to analyze the impact of voltage or current noise presence on the internal nodes and the maximum range tolerated by the cell. These metrics are widely used for their ability to be implemented in computer simulations at the design phases. It is, therefore, a metric based on the internal nodes ability to tolerate noise in the form of voltage or current.
The popular definition for the cell noise margin is obtained using the voltage transfer curves (VTC) considering both read and write operations.
The read operation is the weakest situation because the cell transistors must be stronger enough to discharge the pre-charged bit-line without flipping its value stored. In a read operation, the memory cell is connected to the bit-lines and the internal nodes are disturbed. The node (VL or VR) at low voltage value must remain at this value to maintain the stored value in the cell, while the bit-line is discharged through the pull-down transistor. The static noise margin (SNM) quantifies the maximum amount of voltage noise that can be tolerated at the cross-inverters output nodes without flipping the cell. In the case of a read operation, Figure 3 shows the node values setup and the noise voltage sources (Vn) to introduce the disturbance simulating a DC sweep between 0 and VDD. The transistor MNL is trying to maintain the VL node as low as possible discharging the BLL. The effect of Vn introduces an extra voltage step that produces, if high enough, the loss of the stored value. The maximum extra voltage tolerated by the cell previous to lose the data is defined as the read static noise margin (RSNM).
The setup for the read static noise margin definition.
The graphical method to determine the RSNM uses the static voltage transfer characteristics of the SRAM cell inverters. Figure 4 superposes the voltage transfer characteristic (VTC) of one cell inverter to the inverse VTC of the other cell inverter. The resulting two-lobed graph is called a “butterfly” curve and is used to determine the RSNM. Its value is defined as the side length of the largest square that can be fitted inside the lobes of the “butterfly” curve [13]. Figure 4 shows the hold/read operation dependence of the “butterfly” curves. Figure 4(b) shows how read operation reduces the noise margin due to the internal nodes connection to the bit-lines.
The VTCs of 6T CMOS based memory cell during (a) hold and (b) read access and graphical noise margin representation.
The memory cell designers try to maximize the RSNM value in order to obtain an optimum stability profile during read operation. To maximize the RSNM, the pull-down transistors width (MNL and MNR) must be set higher than the access transistors width. The size relationship between the pull-down and access transistors is called cell ratio (CR) and its value is usually designed to be higher than 1.
During a write operation the stability is defined considering that the objective of the write operation is to force a new value into the cell, so break the cell stability. In that case, Figure 5(a) shows the cell setup considered to measure the write noise margin (WNM). The case where the new value is equal to the stored value is not considered because the cell does not change the internal values. When the cell is written and the value must be updated to the opposite value, both sides of the cross-coupled inverters (VL and VR) are confronted to two different situations. The first one, the cell side where internal node is at low value and the bit-line is at high value (VL and BLL in Figure 5(a)), the transistor involved is the pull-down transistor (MNL). In the second case, the cell side where internal node is at high and the bit-line is at low value (VR and BLR in Figure 5(a)), the transistor involved is the pull-up transistor (MPR). Therefore, the write margin will be measured by the side of the smallest square embedded between the read and the write VTC measured from the same memory cell at the lower half of the read curves, past the trip point. Figure 5(b) shows the graphical representation of WNM.
(a) The 6T CMOS based memory cell setup for the write static noise margin and (b) the VTCs during write access and graphical WNM representation.
In this case, the higher WNM is, the lower the writability of the memory cell results. Therefore, memory-cell designers try to slightly reduce the WNM value to obtain an optimum stability profile during write operation without affect the read operation. In order to reduce the WNM, the pull-up transistors width (MPL and MPR) must be established lower than the access transistors width. The size relationship between the pull-up and access transistors is called pull-up ratio (PR) and its value is usually designed to be slightly lower than 1.
Alternative SRAM noise metrics can be characterized using the N-curve [14]. In this case, the read and write noise margins are defined using the N-curve trip points showed in Figure 6(b) as A, B and C. The trip points are obtained using the setup showed in Figure 6(a). The N-curve represents the current (ILX) injected to the internal grounded node when the voltage source (VLX) is swept from 0 to VDD. A pair of current and voltage components defines the read/write noise margins. The N-curve values between trip points A and B, see Figure 6(b), define the read metrics: the static voltage noise margin (SVNM), as the maximum DC voltage tolerable at the internal node previous to flip the memory cell content, and the static current noise margin (SINM), as the maximum DC current value that can be injected in the memory cell before its content changes.
(a) The N-curve measurement setup and (b) the stability parameters defined.
The N-curve values between trip points B and C, see Figure 6(b), define the write metrics: the write trip voltage (WTV), as the DC voltage drop needed to flip the memory cell content, and the write trip current (WTI), as the amount of DC current injected in the memory cell to change its content.
The main drawback of stability margin metrics defined on internal cell nodes is that they overestimate read failures and underestimate write failures since it assumes an infinitely long operating duration. However, those parameters are easy to simulate and have a graphical interpretation.
Other metric alternatives are based on direct access to external memory cell nodes: power supply, word-line, and bit-line nodes [15]. In addition, bit-line current or digital stored value measurements are proposed to characterize the stability with less memory array intrusions [16].
These methodologies measure the bit-line current variation while adjusting voltages of bit-lines, word-lines or cell power supply node to obtain read and write stability data.
The SRRV metric based on the observation of IBL estimates the read margin based on the power supply swept. The IBL is monitored to determine when the memory cell losses their ability to remain unaltered and changes the stored value.
Figure 7(a) shows the cell setup values when the bit-lines are set to pre-charged value. The word-line is ramped up until the sudden transition of IBL appears to remain at a low current value. Figure 7(b) represents graphically the evolution of IBL versus power supply voltage. When the current drops from its maximum value, the SRRV is defined as the maximum power supply voltage drop to produce a successful read operation. Therefore, SRRV is obtained from the difference between the nominal power supply voltage and the minimum power supply voltage to disturb the stored value.
(a) The setup for the supply read retention voltage observation and (b) the graphical SRRV definition from current-voltage transfer curves.
The WRRV metric is based on the observation of IBL and estimates the read ability of the cell when the word-line is swept above VDD. The IBL is monitored to determine when the memory cell changes the stored value losing their ability to perform a non-destructive read operation.
Figure 8(a) shows the cell setup values when the bit-lines are pre-charged to VDD. The WL is ramped up until a sudden transition of IBL appears. Figure 8(b) represents graphically the evolution of IBL for values of word-line voltage above VDD. When the current drops from its maximum value, the WRRV is defined as the difference between the maximum word-line voltage and the nominal power supply voltage.
(a) The setup for the word-line read retention voltage observation and (b) the graphical WRRV definition from current-voltage transfer curves.
The BWTV estimates the cell writability as the maximum bit-line voltage tolerated by the BLR node (see Figure 9(a)) able to flip the cell value during a write cycle.
(a) The setup for the bit-line write trip voltage observation and (b) the graphical BWTV definition from current-voltage transfer curves.
Figure 9(a) shows the cell setup to perform the margin measurement when it is initialized to store a ‘0’ (VL retains the ‘0’ and VR the ‘1’). The word-line (WL) and the left bit-line (BLL) are biased to VDD, while the right bit-line (BLR) is ramped low from VDD. The current measured on BLL node (IBL) is monitored expecting a sudden drop (see Figure 9(b)). When this condition occurs, it indicates a successful write operation and defines the lower bit-line voltage tolerable by the cell. Figure 9(b) shows the bit-line current waveform and graphically shows the noise margin.
The WWTV metric based on the observation of IBL estimates the write margin based on word-line sweep. The IBL is monitored to determine when the memory cell changes the stored value.
Figure 10(a) shows the cell setup values when the bit-lines are set with inverted values. The WL is ramped up until the sudden transition of IBL appears. Figure 10(b) represents graphically the evolution of IBL for different values of word-line voltage. When the current drops from its maximum value, the WWTV is defined as the maximum word-line voltage drop to produce a successful write operation. Therefore, WWTV is obtained from the difference between the nominal power supply voltage and the minimum word-line voltage to change the stored value.
(a) The setup for the word-line write trip voltage observation and (b) the graphical WWTV definition from current-voltage transfer curves.
The current based noise metrics requires analogue measurements from bit-lines requiring memory cell array modifications. To overcome these requirements, another metric is proposed in [17] with minimal redesign requirements. It is based on word-line voltage sweep and requires read/write memory operations because the stored value is the observation parameter.
The MWLV estimates the writability margin finding the minimum word-line voltage level to produce an effective write on a specific cell [17].
For each value in the word-line voltage level the stored value is read to determine when the memory cell changes the value. Figure 11(a) shows the cell setup values when the bit-lines are set with inverted values. The VWL is ramped up until the new value is written. Figure 10(b) represents graphically the evolution of stored value for different values of word-line voltage. When the write operation is successful, the MWLV is defined as the maximum word-line voltage drop to produce a successful write operation. Therefore, MWLV is obtained from the difference between the nominal power supply voltage and the minimum word-line voltage to change the stored value.
(a) The setup for the maximum word-line voltage margin observation and (b) the graphical MWLV definition from digital-voltage transfer curves.
This technique was proposed in previous works [11] to improve the read/write stability with minimal SRAM circuit modifications. The reduction of word-line voltage during read/write operation increases cell stability during operations because the internal nodes of half-selected cells are connected to the bit-lines through a weaker connection, and thus the memory cell becomes more stable.
Finally, it is important to note that the MWLV metric is similar to WWTV metric because in both cases the word-line voltage is used to disturb the write operation. In this sense, the voltage conditions showed in Figures 9(a) and 10(a) are equivalent. The main difference consists in how the behavior of the cell is monitored. In WWTV the IBL current is used to detect a successful write on cell, while the word-line voltage is ramped up. Therefore, the WWTV considers the DC behavior response. By contrast, in MWLV a successful write operation is observed reading the stored value after a regular write operation at lower word-line voltage. That is, the cell memory is operated using memory read/write operation at regular designed timings. Therefore, the MWLV metric analyses the transient behavior because timing and dynamic features of write operation are included.
The existence of several metrics combining different methodologies to monitor the cell stability requires a deep analysis. In this sense, intensive Monte-Carlo simulations considering process variation on a commercial 65 nm CMOS technology have been performed to determine the correlations between current based writability margins and the digital based MWLV metric. Figure 12 shows the linear correlation obtained between BWTV, WWTV and MWLV metrics. A linear correlation between metrics with a coefficient near to 0.95 is archived in both cases. This result suggests a remarkable equivalence between the different metrics and highlights the opportunity for freely selecting the most adequate methodology.
High grade of correlation between MWLV and WWTV/BWTV using Monte Carlo simulations with 65 nm CMOS technology.
Detecting SRAM performance shifts due to parameter variation and BTI involves sensing SRAM cell and peripheral circuit degradation. In this work, we center our attention on the sensing process and on the long-term variability effects on the memory cell margins, which depend on the threshold voltage shift of all NMOS and PMOS devices. It is well known that the fabrication processes in nanometer era introduce parameter variability, which translates in functionality effects at the device level.
The process variability has an impact on the noise margins, showed in Figure 13, where corner and Monte-Carlo analysis results show a high variability in the read static noise margin. The corner analysis assigns the slow-fast corner (SF in Figure 13(a)) as the most stable one that increases the stability in 17.1% from typical-typical corner (TT in Figure 13(a)), while the weakest is the fast-slow corner (FS in Figure 13(a)) and decrease the stability in 25% from TT corner. The maximum variability of RSNM is in the range of 60 mV.
Process variability on read static noise metric obtained from (a) corners and (b) Monte-Carlo analysis with a commercial 65 nm CMOS technology.
The RSNM histogram, showed in Figure 13(b), has been obtained from a 1000 iterations Monte-Carlo analysis considering process variation with a 65 nm CMOS technology. The variability spread is 240 mV with the mean value of 207.4 mV, and the standard deviation of 40.8 mV. Similar process variability impact may be observed using other noise margins.
In addition to the process variability, the use of the device may introduce extra parameter variability due to wearout/aging mechanisms. The influence of Vth variability on SRAM write margin metrics has been reported in Figure 14(b) [15, 17], where different write metrics (write noise margin, bitline write trip voltage, wordline write trip voltage and maximum wordline voltage) are explored considering Vth deviations due to wearout/aging effects.
Vth drift impact on (a) read and (b) write noise margin definitions using a commercial 65 nm CMOS technology.
Figure 14(a) shows the Vth variability impact on SRAM read noise margins (read static noise margin, supply read retention voltage, wordline read retention voltage). In the case of read noise margins, the variability behavior shows that the Vth drift decrease the read stability.
In the case of write noise margins, the write stability increases, this is, the memory cells are more easily written. Consequently, BWTV, WWTV and MWLV ramp up with Vth. According to their metric definitions, it means that the bit-line or word-line voltage can be lower previous to produce a fail in a write operation. However, WNM decreases with Vth, pointing out that the memory cell reduces its ability to tolerate noise during a write operation, because it is weaker against write processes. Therefore, although the four write metric curves showed in Figure 14(b) evolve in different directions, the meaning is equivalent in all of them: the memory cell is more stable during write operations allowing easy write operations with the increment of Vth value.
Finally, external variables may influence on metric values. To illustrate this impact, Figure 15 reports the impact of power supply reduction on RSNM considering corners analysis (Figure 15(a)). The temperature decreases the noise margin during read operations. This temperature effect considering corners analysis is showed in Figure 15(b). And finally, the functional state (hold or read) of the circuit also is reported to influence the noise margin. Figure 15(c) warms about this effect representing the static noise margin of a memory cell in hold and read operation.
Impact of (a) power supply, (b) temperature and (c) operation and transistor width on read static noise metric using a commercial 65 nm CMOS technology.
Although, the described static stability margin definitions are proposed to help designers during the pre-silicon step, the large number of devices in a memory array, and the increasing variability of technology processes, difficult the development of accurate models to simulate random effects in critical design parameters. Therefore, post-production or livelong memory measurements strategies are becoming important issues in modern system designs with high number of memory instances per chip.
Those popular metrics are suitable for simulation estimation but are too difficult to measure on real circuits. In this sense, DC read/write margins measurements were proposed using similar simulation methodologies. Direct access to internal storage nodes was implemented in [18] using large analogue switch networks circuits to connect internal cell nodes to external voltage sources and current monitoring circuits. Although, this methodology may achieve higher accuracy in SRAM failure analysis than simulation, its main drawback is the memory array redesigning efforts and hardware complexity required to perform voltage/current DC sweeps. In addition, the stability results and memory performance may also be affected negatively.
To decrease the intrusion on the memory array layout, the metrics based on bit-line current measurements have been proposed for large memory arrays [15]. Direct bit-line current measurement has been proposed in the literature to characterize noise metrics [15] or aging effect [19] in large memory instances with less memory cell array modifications. These approaches measure bit-line current variation, while adjusting bit-lines, word-lines and cell supply voltages to obtain writability data. Therefore, it is necessary to analyze the voltages and currents to obtain stability margins. Even though bit-line based metrics report good dependence with Vth drift, their implementation is resource demanding mainly in terms of SRAM redesign and area overhead. In this sense, several previous works have proposed an SRAM array schema designed for large-scale memories to perform bit-line current measurements [15]. The hardware requirements of [15] are: independent cell supply, cell ground, N-well bias, and P-well bias used for voltage adjusting conditions. Furthermore, column read/write circuitry must be shut off while a complex switch network for direct bit-line access enables to measure bit-lines current. The total area overhead is estimated to be around 20% [15]. Hence, the costs in terms of hardware redesign are elevated. In addition, these direct bit-line measurement methodologies may accelerate transistor aging because, during its measurement, the memory cell is forced to work at non-nominal DC voltage or above the nominal values as in the WRRV metric. In addition, DC currents values flowing through the devices may increase the faulty probability due to electro-migration effects.
Finally, the digital based metric is proposed in [16, 17] reducing the hardware requirements, and the needs of memory redesign, while maintaining the capabilities to estimate the write margin. Apart from not requiring the redesign of memory array, the memory cell operates at nominal values, i.e. Accesses time schedule and voltage/current levels. Table 1 compares the features of the different noise margin metrics included in this work.
Stability metrics comparison for lifetime monitoring.
MWLV is measured reducing the word-line voltage peak value during a write operation, without alterations on memory cell performance, and requiring minimal memory overhead. In fact, it is obtained performing only a sequence of read/write operations on the target cell with different word-line voltages. Despite of that, the authors do not focus the attention only on MWLV noise margin, but also on some of the preciously introduced metrics, discussing their feasibility for lifetime aging effects monitoring. Next section will propose a built-in monitor approach feasible for noise metrics based on bit-line current or digital value observation.
The built-in aging monitor approach based on noise margin measurements is feasible for different noise metric search. Figure 16 shows the monitor schema adding the yellow blocks needed in all noise margins implementations, the red blocks needed in direct bit-line current measurements and the blue blocks needed only for MWLV metric.
(a) The lifetime NM monitor schematic basics and (b) the NM search algorithm proposal for the built-in monitor schema approach.
The Built-in monitor schema is supposed to perform the noise metric search in field, such as between activity periods. Therefore, the memory array will be disconnected from external signals to run the monitor algorithms. The common elements needed are the row and column counters (proposed to store the current memory address and run sequential accesses), and the stored data register (that saves temporarily the previous data read from current memory address), because the noise margin search algorithms are destructive (DC voltage swept or write operations).
The direct bit-line current-based noise metrics have the following requirements: the bit-line current monitor, the power supply/bit-line voltage controller and the word-line voltage controller. The voltage controllers are introduced to generate the desired DC voltage swept on the internal memory array nodes. The bit-line current monitor is able to detect the value sudden drop signaling the new noise margin.
The MWLV noise margin has less hardware requirements because the circuit changes are mainly centered on controlling the word-line voltage peak. The built-in approach proposes a word-line voltage controllability implementation based on using as isolated power supply node of all last row decoder gates. A feasible digitally controlled word-line regulator was reported in [17].
The build-in control unit implements the search algorithm depending on the noise metric implemented. A feasible algorithm proposal is showed in Figure 17 highlighting the functions related with each metric methodology. The direct bit-line current measurement is based on the implantation reported in [15], while the MWLV metric is based on the design reported in [17]. Figure 17 shows a 3D representation of the MWLV values measured from a 256 × 8 bytes memory implemented using a 65 nm CMOS technology [17] showing the suitability of this built-in approach.
Spatial MWLV margin distribution due to process variability considering an 8 × 256 memory cell array using a commercial 65 nm CMOS technology.
Finally, it is important to note that the proposed search algorithm may be applied at any time during the normal lifetime of the memory. To determine the degradation evolution is not necessary to perform a whole exploration and the NM value may be estimated using a random address evaluation.
In addition, a novel online bit-line current measurement strategy has been recently proposed by [19] to measure aging effects on memory cell PMOS devices that the interest to perform online aging estimations is increasing in importance and is a challenging topic.
The runtime Reliability monitoring challenge in 6T CMOS SRAM has been addressed. The post-silicon stability profile has been highlighted as an observable signature to extract performance degradation due to reliability mechanisms. The different noise margins are identified as a suitable metric considering SRAM design with extra reliability guard bands. In addition, the write margins are suitable for designs oriented to guarantee read operation in exchange for writability degradation.
Anterior segment ocular trauma is the one of most common ocular condition seen in accident and emergency. The ocular trauma may vary from minor injury such as a corneal abrasion to a grievous sight threatening one such as a corneo-scleral tear or a chemical injury. It has been said to be the most underdiagnosed trauma. In US the prevalence of ocular trauma is 1400 per 100,000US persons with an annual incidence of 8.1 per 100,000. This number is variable depending on the geographic location and more importantly on the occupational safety standards enforced in each country as it is said that 90% of the ocular trauma could have been prevented with protective eyewear.
The most crucial element in the management of ocular injuries is a thorough examination to identify all possible injuries to the eye and institute the appropriate treatment. The initial management plays a very important role in determining the prognosis of the vision, the need for further surgeries and also provide us with realistic goals of visual rehabilitation. In this chapter we aim to enumerate the common modes of ocular injury, manifestations of ocular trauma, the diagnostic features and provide the reader with a comprehensive overview of the treatment instituted. We will also include the accepted international trauma scoring systems and their utility in prognosticating the visual outcome.
Most of the injuries involving the eye, have a bearing on the anterior segment as it is considered to be the most vulnerable part. This is because the structures are usually unable to outlast the impact an injury can have, due to lack of stretchability, presence of highly specialised structures that have poor healing and hence leads to a permanent non-functioning scar tissue [1].
Starting from the anterior-most structure, the possible types of injuries that might be inflicted onto the anterior segment structures are as follows: eyelid edema, eyelid tear, corneal abrasion, focal or total epithelial defects, corneal laceration, corneal perforation, foreign body implantation, scleral tear, iridodialysis, hyphaema/microhyphaema, traumatic iritis, angle recession, traumatic cataract, lens dislocation [2]. Based on the mode of injury they can be broadly classified as mechanical, thermal and chemical injury. There are many classifications of the ocular trauma and the most widely used one is the Birmingham’s eye trauma terminology system (BETTS) which is listed in Figure 1. This was developed by the ocular trauma classification group in 2002 [3]. This classification mainly concentrates on the mechanical injuries. The classification system helps in standardising the terminology used in ocular trauma for prognostic staging as well as for research purposes to quantify the injuries and to study the outcomes of each and every type of insult.
BETTS ocular trauma classification.
The system broadly classifies mechanical injuries into open and closed globe injuries. Open and closed globe injury is further classified based on the type and grade of injury (based on visual acuity at the time of presentation), presence of relative afferent pupillary defect, position of injury (posterior-most part affected in closed globe injury and the location of injury in case of open-globe injury). The definitions of the injuries are as follows.
Kuhn et al. introduced a system of prognosticating the visual outcome based on presenting visual acuity and pupillary reaction and the zones of eye ball involved but it was not commonly used. Further in 2002, a new ocular trauma score (OTS) (Figure 2) was developed to help primary physicians to prognosticate the eye injuries and help them in communicating to the families [5]. Its usefulness has been established in some patients undergoing the three port pars plana vitrectomy for Intra-ocular foreign bodies and it was found that the post operative visual outcome was similar to the OTS prognostication [6]. However there are limitations to the OTS as it does not take into account any other type of injury other than mechanical injury such as thermal and chemical injury nor does it include significant facial and adnexal injuries that might have an impact on the visual outcome.
Table of ocular trauma score.
Addressing these issues Shukla et al. have proposed a new classification system which is a more comprehensive classification and includes injury to adjacent structures and associated injuries such as face and head injuries [7].
Eyelid injuries can occur due to blunt trauma, cutting injuries or road traffic accidents. The most common injuries are eyelid edema and echymoses (Figure 3). These are cosmetically more significant and worrisome for the patients. They usually resolve spontaneously but require a detailed evaluation so as to not overlook any underlying serious pathology to the eye.
A female patient with RTA presented with lid echymosis and edema with abrasions over the eye lid.
The eyelid lacerations can be classified as the following types [4]:
Simple and superficial or deep not involving the lid margin.
Lacerations involving the lid margin
Lacerations involving the canaliculi
Lid lacerations more than 2 mm in linear length require suturing. The contaminated wounds would require debridement of necrotic tissue and suturing. If the wound is infected and necrotic then delayed suturing is planned or else all lid lacerations require primary repair.
Deep laceration involving the superior aspect of upper lid which was subsequently sutured in layers.
Deep laceration involving the lateral aspect of both lids. If these sutures are nor sutured correctly it can lead to a disfiguring scar.
A 56 year old female patient who came with history of blouse hook injury of the lower lid which was sutured using the step-wise approach.
Simple superficial injuries require approximation with interrupted sutures with 6-0 silk or 6-0 plain gut suture. Care must be taken to evert the skin while taking bites and tight sutures should not be applied. They usually do well with minimal scar
Deep lacerations require suturing of different levels (Figure 4). Muscle has to be sutured with 6-0 vicryl and skin with 6-0 silk (Figure 5).
Marginal lid tears repair involves a step-wise approach
The step wise approach can be summarised as follows:
Step 1: The edges of the eyelid margin have to be approximated using 6-0 Silk suture by placing a simple interrupted suture at the grey line. It should be made sure that the sutures are not tied.
Step 2: The tarsal plate has to be identified and partial thickness interrupted sutures using 6-0 absorbable suture will have to be placed to close it. This is the most critical step to maintain the structural integrity of the lid.
Step 3: Place a 6-0 silk suture closer to the lash line and the suture at the grey line can be removed.
Step 4: Suture skin using 6-0 silk with interrupted sutures.
It is very important to suture the marginal lid tears carefully as a well done repair avoids many complications such as trichiasis, ectropion, entropion and cosmetically unacceptable notch. These can be avoided by a meticulous primary repair (Figures 6 and 7).
Eyelid laceration with canalicular tear: These tears require a ministent/Crawford stent/aurostent to be placed during the primary repair to ensure patency of the canaliculus. Once the stent is placed and anchored, skin over it is sutured with interrupted sutures.
A patient with both upper and lower lid laceration involving eyelid margins shows a healed scar with well apposed lid margin.
Conjunctival insults are invariably associated with mechanical trauma to the eye. Conjunctival chemosis and subconjunctival haemorrhage are the most common manifestation of any ocular injury. Conjunctiva can be affected with orbital fractures and even trivial trauma such as finger nail injury.
Presence of a bullous sub conjunctival haemorrhage (Figure 8)
Conjunctival tear along with subconjunctival tear
Associated shallow anterior chamber
Associated hyphaema.
Presence of any of the above associations warrants a detailed examination to rule out underlying scleral tear. A dilated fundus examination has to be done to rule out posterior segment injury.
Bullous subconjunctival haemorrhage which subsequently was attributed to an extensive scleral tear after thorough examination. This patient presented with eye injury following a self-fall at home. Patient underwent primary repair but the visual prognosis was guarded and eventually resulted with phthisis bulbi.
Subconjunctival haemorrhage does not require any treatment. Reassuring the patient is all that is required.
Conjunctival tears can be left unsutured unless they are very large tears or tears extending to the fornix which require suturing with 8-0 absorbable suture such as vicryl.
Being the anterior-most structure of the eye, it bears the brunt of all injuries. The corneal epithelium may have defects, and can range from superficial corneal abrasions to total epithelial defects. As the cornea is highly innervated, abrasions are very painful. It usually takes around 24–48 h for the corneal epithelium to heal [2]. Sometimes it is possible to examine and diagnose the cornea directly under torchlight, however, staining with fluorescein will be required in most cases to diagnose. Any defect will be readily demonstrated by fluorescein staining (Figure 9) [8]. Such defects get healed by “sliding” over of limbal epithelial cells and adhesion of these cells may take up to 6 weeks. Deeper defects will create transformation of keratocytes to myofibroblasts and thus creates scarring of the cornea [9].
A traumatic corneal abrasion as seen after fluorescein staining and observation under the cobalt blue light.
Once an epithelial defect is noted, careful examination has to be done to rule out any foreign body in the superior palpebral conjunctiva and it may be required to do a double eversion of the upper palpebral conjunctiva to examine the fornix and rule out foreign bodies. If no foreign body is detected then the next concern will be to identify is there are any infiltrates along the margin of the epithelial defect. If there are no infiltrates then the eye can be patched with an antibiotic ointment (e.g., chloramphenicol) and lubricating gel and the patient has to be reviewed after 24 h. If there is any discharge or a small defect and patching is not advised and antibiotic eye drops and prophylactic antibiotics are prescribed. The management protocol for corneal abrasion has been shown in Figure 10.
Management of corneal abrasion.
Ocular surface foreign bodies are the second most common type of ocular trauma. The most common aetiology is fall of foreign body into the eye during works such as welding, grinding, hammering or driving without protective eye wear. The patients give a positive history and they usually seek medical help earlier because of the discomfort.
Though the history of fall of foreign body is important but the patients description of the location should not be the guiding point for examination as most often this can be misguiding and foreign bodies may be found elsewhere [10].
When a patient presents with fall of foreign body one needs to a systematic examination to rule out foreign body.
Step 1: Examine the ocular surface for the presence of foreign body (Figure 11)
A superficial corneal foreign body.
Step 2: Retract the lower lid to examine the lower palpebral conjunctiva and evert the upper lid and examine the superior palpebral conjunctiva as the subtarsal sulcus is a common location for lodgement of foreign bodies (Figure 12).
Staining of cornea on eversion of the upper lid was found to have a metallic foreign body in the sub tarsal sulcus.
Step 3: If no foreign body is found then stain the surface with fluorescein dye and examine the ocular surface under cobalt blue filter. This usually reveals any abrasion of the cornea and will likely indicate the position of the foreign body (Figure 13)
Corneal abrasion, evident on fluorescein staining.
Step 4: If no foreign body is found in all the above steps but there is a strong suspicion of foreign body then double eversion of the upper lid has to be done. This is usually rare but some foreign bodies can get lodged there (Figure 14).
Double eversion of the eyelid is done using the Desmarre’s lid retractor to look at the superior fornix.
Once the foreign body (FB) is found it has to be removed as early as possible. The foreign bodies can be superficial or deep. Superficial foreign bodies in adults can be removed under topical anaesthesia under slit lamp. After applying local anaesthetic like proparacaine, the FB can be removed with a cotton tip applicator if it is less than 24 h old. If it is >24 h, it has to be removed with a bevelled 26 G needle. In case of a metallic FB, care should be taken to remove the rust ring completely as the rust ring can cause increased inflammation of the surrounding cornea and leave a scar. If this is in the central cornea it can affect vision.
If it is a deep foreign body, it may be difficult to remove the rust ring completely. These patients have to be called after 24 h and complete removal of the rust ring has to be done.
Deep foreign bodies revealing a full thickness lodgement in the cornea have to be removed only in the operating theatre as these cases may require suturing of the cornea after removal of the foreign body.
In children examination can be very difficult. These patients require examination under anaesthesia and removal.
Blunt or penetrating injuries can lead to traumatic iritis. Usually patients with iritis report late. Following injury, they develop iritis over a few days and may seek help only after few days once the symptoms of pain, watering and photophobia set in. On examination fine keratic precipitates and flare and cells in the anterior chamber will be found and the pupil will be miotic or may show some sphincter tears and mydriasis. IOP may be normal, low or high.
They have to be started on steroids with a careful follow up of IOP to rule out steroid responders. And cycloplegics have to be started.
Once the iritis resolves all these patients have to undergo gonioscopy to rule out angle recession.
Blood in the anterior chamber is called hyphaema. Trauma is the most common cause. Compressive forces can cause damage to the iris, ciliary body, trabecular meshwork and thus disrupt the vasculature and thus cause bleeding. Very rarely it can be because of bleeding dyscrasias. Blunt trauma especially ball injuries, sports injuries and firework injuries can cause hyphaema.
Hyphaema can be graded as follows:
GRADE I: no visible layering of blood but only red blood cells in the anterior chamber (AC) seen only under the slit lamp—called as micro-hyphema
GRADE II: blood that occupies less than one third of the AC
Grade III: blood that occupies one third to half of the AC
Grade IV: blood that occupies the whole AC.
Bright red blood in the AC is called as “total hyphema” and dark red blood in the AC is called as an “8-ball hyphema” or a “blackball” hyphema. It is important to distinguish between the two as the latter suggests longstanding blood in the AC possibly due to pupillary block which could be alarming as it can lead to secondary angle closure [11].
If the grade of hyphema is less than 2 then they can be treated on OPD basis. But a grade 3 and above require inpatient admission as prompt management of complications that can arise will help in saving vision.
Hyphema that are uncomplicated are usually managed conservatively by asking the patients to have limited head movements along with covering the eye with an eye-shield.
It is particularly useful to ask the patients to have head-end elevation at around 30–45° so that the hyphema settles inferiorly. This allows patients by not obstructing the visual axis and also in limiting contact between the red blood cells and the corneal/trabecular meshwork in other areas [12].
Intraocular pressure should be frequently monitored. If found elevated, topical medication should be started (antiglaucoma medication such as B blockers (timolol 0.5%) and alpha agonists like brimonidine tartrate 0.2% thrice daily can be used but best avoided in paediatric age due to the risk of apnea) or carbonic anhydrase inhibitors (dorzolamide 2%) drops can be used. Prostaglandin analogues have to be avoided. Systemic carbonic anhydrase inhibitors are also effective for e.g., acetazolamide and/or methazolamide are some options that can be used in paediatric and adults alike. The former may be given orally or intravenously (IV) at a dose of 5 mg/kg four times a day in children and 250 mg four times in adults. The latter however, is given orally at a dose of 3 mg/kg four times a day in children or 100 mg three times per day in adults.
Topical steroids like prednisolone acetate 1% in tapering dose based on the amount of hyphema to limit inflammation. Started as 8 times a day and tapered according to the response. If the grade of hyphema is 3 or more then oral Prednisolone has to be started at 0.5–1 mg/kg body weight.
Topical cycloplegic agents like homatropine 2% twice daily to relieve pain due to ciliary spasm/photophobia.
Aminocaproic acid and tranexamic acid are two novel lysine analogues that prevent plasmin from attaching to the formed fibrin clot and thereby preventing dissolution of the clot. It also prevents the conversion of plasminogen to plasmin, and thus further reduces clot dissolution. Aminocaproic acid can be administered at a dose of 50 mg/kg orally every 4 h (total cumulative dose not exceeding 30 g/day) and tranexamic acid can be administered at a dose of 25 mg/kg orally three times daily (total dose not exceeding 1.5 g/day).
Immediately following injury there can be traumatic miosis however traumatic mydriasis is more common. Tears of pupillary margins were found to be the most common manifestations. Small sphincteric tears are known to cause notches whereas more severe cuts (like those extending from the margins to the root) cause severe compromise of the function of the iris. This can lead to traumatic mydriasis of the eye.
Apart from tears, other injuries sustained by iris are—iridodialysis which is the separation of the iris root from its attachment at the ciliary body which is visible on gonioscopy.
Lenticular damage that can be inflicted can be either due to lens opacification with or without dislocation. According to Canavan et al. [1], localised anterior cortical lens opacities and posterior cortical lens opacities can be present. These opacities were found to be punctate or also known ‘cobweb’ type and in some instances the typical rosettes can be seen. Vossius ring is the imprint of the pupillary margin against the anterior capsule during the time of injury and this gives an indication of the severity of the injury. Focal lens opacities due to posterior synechiae and acute ocular hypertension (glaucomflecken) are also reported following trauma.
Cataract can be seen as anterior or posterior cortical opacities. The cataract can be due to increase in permeability of the capsule or due to tear in the anterior capsule. If the anterior capsule is not torn then the cataract can be removed in a second surgery once the inflammation reduces and the corneal curvature stabilises as the Intra ocular lens calculation will be more accurate. But however, if the anterior capsule is breached then the cataract extraction has to be done as a primary procedure.
Corneal tears: Corneal tears can be infected or non-infected. Non infected wound requires a different management. First, we will look into management of clean corneal lacerations.
Any sclero-corneal tear warrants to rule out any other injuries which could be life threatening. Only once this is confirmed and other injuries ruled out the corneoscleral tear is managed.
The corneal tear has to be examined to rule out presence of incarcerated intraocular tissue or a intra-ocular foreign body. Most of the times it may not be possible to do a complete examination in the OPD or emergency and a complete examination is possible only during the surgery. Hence the history of the mode of injury is very critical to anticipate what needs to be kept ready during surgery. If an intra-ocular FB is suspected one needs to have the vitrectomy machine ready and possibly a posterior segment surgeon has to be informed. If a break in the anterior capsule is seen then cataract surgery instruments have to be ready and the OT staff have to be informed about these as it is important to have all the instruments ready and a complete surgery is possible only if these are anticipated and the primary surgery has to be performed with utmost precision as this will have an impact on future surgeries.
Timing of the surgery: The cornea-scleral tears have to be repaired as early as possible but however it has been shown that within 36 h of injury the occurrence of endophthalmitis does not significantly increase.
The management protocol has been shown in Figure 15.
Schematic diagram showing management of corneal tear.
The goals of repair are:\t\t
Watertight wound
Prevent infection
Minimise scarring and astigmatism
Lamellar tears: Undisplaced lamellar tears (Figure 16) in the cornea can be treated with a bandage contact lens and antibiotics. These also have to be seen after 24 h and confirmed that there is no increase in the displacement or any infiltrates have to be ruled out and the same treatment can be continued.
An undisplaced lamellar tcornea tear with mucus accumulation.
A child with a pencil injury presented with undisplaced lamellar corneal tear which was sutured.
Small tears <2 mm but Seidel’s test positive can be treated with glue and bandage contact lens. But this should not be tried in patients who cannot be followed up regularly and in children (Figure 17).
Small self-sealed tears <2 mm with a well formed anterior chamber and negative Seidel’s test can be left untreated and prescribed antibiotic drops for 1 week. These patients have to be seen the next day and Seidel’s test has to be treated and if there is no further change they can be left untreated.
However in children and non-compliant patients or patients who are not able to come for regular follow up it is better to suture these wounds too.
Large tears (>2 mm) with or without iris prolapse needs to be repaired as early as possible. Once any life threatening injuries are ruled out patient can be taken up for surgery.
Anaesthesia: The anaesthesia depends on the surgeon’s and patient’s preference. In a cooperative patient and a simple corneal tear without any iris prolapse suturing can be done under topical anaesthesia. In a large corneoscleral where exploration is required then general anaesthesia is preferred. But if general anaesthesia cannot be given due to systemic reasons then suturing can be done under local anaesthesia. But care must be taken that the patient does not squeeze his eyes during local anaesthesia injection. To prevent inadvertent pressure on the globe facial block can be given to paralyse the orbicularis muscle followed by peribulbar which can be given in instalments of 2–3 ml initially followed by a few corneoscleral sutures and repeat infiltration can be done as per the need.
Surgical procedure:
The corneal tear has to be inspected and cleaned and any foreign particle have to be removed.
If iris tissue is prolapsed into the wound it has to be pulled down. It is better to pull down than push the iris tissue from the wound as the iris tends to prolapse into the wound if it is pushed through the wound. A side port incision has to be made adjacent to the wound and the iris tissue has to be swept away from the wound. Viscoelastic can be used to keep the iris away from the wound. Excessive viscoelastic may result in iris prolapse hence one has to be judicious in its use. (Figure 18)
Once the wound is cleared of all the foreign bodies and iris pigments it is important to identify the lamellar and perpendicular tears in the wound. The perpendicular/straight cuts have to sutured first as they are the leaky parts. 10-0 or 9-0 nylon suture is preferred with a 3-1-1 tie or a 2-1-1 tie respectively. Once the straight cuts are sutured the lamellar cuts fall in place and the wound remains well apposed and it becomes easy to suture.
The landmarks such as limbus, and pigment lines or apices of the tear have to be aligned and sutured first.
One should make sure that adequate number of sutures are placed to ensure a watertight seal. One should not be too enthusiastic in applying sutures as these sutures are potential source of scar and astigmatism on the cornea and only as many as necessary have to be applied. (Figures 19–22)
It is very important to bury the knots at the end of the surgery as an unburied knot can cause irritation and can be a source of mucus accumulation and infection of the wound.
If the lens capsule is breached one should not attempt to extract it out from the corneal wound. The corneal tear has to be sutured and the cataract removal has to be performed from a limbal wound. Placement of IOL is arguable as the correct calculation of IOL power is impossible. It is better to place IOL as a secondary procedure.
In case of stellate tears there are many procedures described such as Eisen’s method and Atkins method but however if one is not able use these methods, a simple cross stitch across the stellate tears would be sufficient.
In case of tissue loss sometimes a patch graft might be required to form the anterior chamber. If suturing is not possible then one may have to use a combination of suturing and glue but tight pulling of the tissue which causes distortion of the anterior chamber and angle architecture is not advisable.
The injection of intravitreal antibiotics is also arguable. If the posterior capsule is not breached in the primary injury, it is advisable not to inject any intravitreal antibiotics but if there is a PC rupture of there is evidence of endophthalmitis then intravitreal antibiotics can be injected during the primary procedure.
Iris prolapse and its subsequent repositioning.
A small corneal tear involving the superior half of the pupil requires only two sutures.
An inferior corneal tear sutured.
A corneal tear repair 1 year follow-up had best corrected visual acuity of 6/9.
An 18 year old boy who underwent corneal tear repair and cataract removal and IOL implantation in the primary procedure presented with BCVA of 6/12 at 12 months follow up.
Topical antibiotics and cycloplegic agents along with systemic antibiotics.
Topical steroids: Each case has to be assessed and if there is no evidence of infection on post operative day one, then topical steroids can be started and prescribed for a month in a tapering dose.
The corneal sutures are removed after 6–8 weeks and visual rehabilitation attempted. In paediatric cases the sutures have to be removed much earlier due to faster healing and earlier initiation of visual rehabilitation has to be done.
Considered as one of the true ocular emergencies which requires timely assessment, diagnosis and initiation of treatment.
Aetiologies for chemical burns includes: exposure occurring at home or at work place, during incidents with intent of malice such as criminal assaults.
Nature of chemical could be either acidic or alkali—of which, the latter occurs more commonly [13]. Injuries of such nature are known to produce substantial damage to the anterior segment structures like the ocular surface involving the corneal epithelium and limbal stem cells subsequently leading to a permanent visual impairment in one or both eyes depending on the exposure.
The main goal of management is to protect the cornea and to reconstruct the ocular surface to near-normal.
Alkalis are known to cause extensive damage as they are lipophilic in nature and thus penetrate the cell membrane easily and cause saponification of fatty acids and thus damages the proteoglycans and collagen bundles present in the cornea. Due to further release of proteolytic enzymes, there occurs a progression of the tissue damage. Therefore, alkalis are considered to be more corrosive.
Unlike alkalis, acids act by denaturation and precipitation of proteins of the cornea. This acts by forming a barrier on the corneal surface and thus further damage is intercepted. However, hydrofluoric acid is an exception wherein the fluoride ion has the ability to penetrate the cornea and thereby cause significant anterior segment destruction [14].
The severity of the injury depends on the toxicity of the chemical, period for which the chemical was in contact with the eye, penetration depth, and the areas that are involved. It is crucial therefore to take proper history. If possible, details of the chemical can be checked if patient presents with the packaging-details like composition can be recorded. Nonetheless, all of this should not preclude immediate care to the patient which includes irrigation and removal of any visible retained particulate matter.
After administering required first aid as mentioned above, cursory examination should be done and the depth and severity of injury should be assessed. One should specifically look for conjunctival, corneal and limbal status and the prognosis should be graded accordingly. One of the main goals of stratifying the injuries is to grade the prognosis and to thus choose the most appropriate treatment strategy.
The most commonly used standardised classification is that of Ballen modified by Roper-Hall which has IV grades [15, 16]. Dua later suggested the use of an ‘analogue scale’ which describes the injury in terms of clock-hours of conjunctival and limbal involvement [17]. He also suggested that this scale be used on a daily basis to assess improvement. It becomes important to assess conjunctival status more than limbus involvement because even if the limbus is entirely sabotaged and if sufficient area of conjunctiva remains, it will still be able to re-epithelialize the entire corneal surface and thus prevent perforation of the stroma and can be used as an anchor for limbal stem cell transplantation (LSCT) at a later date if required (Figure 23) [18].
Analogue scale for classification of ocular surface burns. Adapted from [
As a dictum, prevention of exposure to chemicals should always be a priority. If occupational exposure is anticipated, adequate protective measures should be practiced, like wearing protective goggles and shield.
Patients usually present to the Emergency Department the first time with severe pain, excessive watering, spasm of the eyelids and reduced visual acuity.
Before attempting a complete ophthalmic examination, a pH check is mandatory after which thorough irrigation of the eyes should be performed to bring the pH to a physiologic range around 7.11 ± 1.5 [19]. Copious and prolonged irrigation may be performed with sterile water, Ringer’s lactate, balanced salt solution or any fluid with near neutral pH (for example diphoterine in alkali burns has been recommended) [18]. The amount of fluid required for irrigation is decided by the attainment of near-neutral pH. Irrigation of up to 1–2 l is usually done but sometimes, 20 l or more may be required to combat extremes of pH and to bring it to normal [20]. It is prudent to recheck pH after waiting for at least 5 min after irrigation. One should also be aware of various topical medications—such as topical anaesthesia, mydriatics, antibiotics if administered and its bearing on the pH. For instance tropicamide and cyclopentolate hydrochloride 1.0% are often used for cycloplegia as topical ophthalmic solutions and may have a pH of around 4.5 and 4.0–5.8 respectively. Similarly, proparacaine hydrochloride has a pH of approximately 3.5–6.0 is often instilled as topical anaesthetic drops prior to irrigation to remove any visible foreign body. Certain formulations of antibiotic eye drops also contain HCl to adjust pH like for example, ofloxacin drops is unbuffered and formulated with a pH of 6.4–6.8. More importantly, fluorescein dyes that are sometimes used to assess corneal damage after the initial irrigation is basic in nature and may alter the pH status. Therefore, due to the non-neutral pH of these solutions, the reassessed pH value of the eye might not reflect the true pH [18].
Injuries of Dua’s Grades I and II will receive a topical treatment consisting of non-preserved tear substitutes that help in re-epithelialisation and also help with the tear film stability, cycloplegic agents like tropicamide or atropine 1% under a topical antibiotic cover, that will help relieve pain and minimise the occurrence of synechiae. It should be kept in mind that the usage of vasoconstrictive agents like phenylephrine should be avoided at all costs to mitigate the risk of limbal ischaemia.
Injuries of grade III through VI should be admitted and along with the abovementioned treatment, patients should receive analgesics (due to excessive pain caused due to corneal nerve inflammation).
Topical steroids (prednisolone acetate 1% or loteprednol etabonate 0.5%) is indicated every hour. They act by stabilising the lysosomal and the cellular membranes of neutrophils and thus prevents secondary destruction of tissues around. However, they also slow down epithelialization after a week, therefore it should be used only in the acute phase and should be discontinued thereafter and be reincorporated after 5–6 weeks to minimise chronic ocular surface inflammation [21].
In patients with excruciating pain, Amniotic Membrane Transplantation (AMT) can be attempted [21, 22]. As Amniotic Membrane (AM) is rich in transforming growth factor β1 and β2 (TGF β), hepatocyte growth factor (HGF) and epithelial growth factor (EGF) and helps in hindering fibrosis formation and promotes epithelialization. For maximum utilisation of these epitheliotropic properties, AM should be used as a patch of appropriate size with the epithelial side down covering the defective area and also in touch with the limbus. Another advantage is that AM acts as an anchor for LSCT if needed in future.
Injuries of grades V and VI with necrosis of conjunctiva and limbal ischaemia, the necrotic area of conjunctiva is denuded and the underlying tenon’s is advanced in order to cover the defect and to prevent a scleral perforation. In cases with limbal stem cell defect (LSCD), simple limbal epithelial transplantation (SLET), also called in-vivo expansion and cultivated limbal epithelial transplantation (CLET), also called as ex-vivo expansion, can be performed. In-vivo expansion can be obtained from three sites namely: from the innermost area adjacent to the cornea, middle limbus, and from the area located outermost and adjacent to the conjunctiva. Similarly, ex-vivo expansion is obtained from the oral mucosa [23, 24, 25].
The last resort being possibly keratoplasty and keratoprosthesis can be employed to help restore vision.
Ocular burn injuries are a relatively uncommon presentation in the emergency department (ED). Ocular thermal injuries constitute only 7% of all the ocular trauma. 15% of the facial burns patients have associated ocular burns and usually thermal injuries are not severe and very rarely do they cause vision loss [26].
Ocular thermal inuries have been reported to occur due to vegetable oil, fireworks, electric arc, e-cigarette explosion and flash burns. Chemical injuries are usually associated with thermal injury too [12].
Ocular thermal injuries are usually less severe due to the blinking reflex and Bell’s phenomenon (palpebral oculogyric reflex). Cornea may show some charred epihtleium which requires to be removed with a cotton bud after instillation of paracaine drops. Once the charred tissue is removed usually an underlying stromal edema is seen. Epithelial defect can be assessed with fluorescein staining. The corneal stromal edema usually resolves within a few weeks and the cornea clears.
Topical steroids have to be instilled for the first 7–10 days like in chemical injuries as it is important to control inflammation in the initial period. Lubricating drops have to be prescribed.
Acute management of anterior segment injury requires a detailed examination and a meticulous repair as the primary surgery has a lasting impact on visual rehabilitation. Systematic examination and preparedness to handle all possible injuries and a surgeon trained in handling all anterior segment injuries is of paramount importance to achieve good vision in these trauma patients.
None.
Customer Satisfaction is of paramount importance at IntechOpen and we take all complaints very seriously. Our Authors, their institutions, and other purchasers, if dissatisfied with the service provided, or the product purchased, can file a written complaint to IntechOpen, 5 Princes Gate Court, London, SW7 2QJ, UK or via the following e-mail address: info@intechopen.com.
',metaTitle:"Customer Complaints",metaDescription:"Our authors, their institutions and other purchasers, if unsatisfied with the service provided or the product purchased, can file a written complaint at IN TECH d.o.o offices at Janeza Trdine 9, 51000 Rijeka, Croatia, or via the following e-mail address: info@intechopen.com.",metaKeywords:null,canonicalURL:null,contentRaw:'[{"type":"htmlEditorComponent","content":"Receipt of complaints will be acknowledged in writing and Intech Limited will respond fully to concerns within 15 business days.
\\n\\nCustomers have the right to terminate the contract without giving any reason (written notice of termination). The deadline for said termination is fourteen (14) days from the date of receipt of goods. Returns are at the expense of the Customer and must be made within the fourteen (14) days from the date of the written notice of termination. Intech Limited will process refunds to the Customer without undue delay.
\\n\\nIn the event that the Publisher ships damaged or misbound copies of products, or duplicate or incorrect copies of the products are received by the Customer, the Publisher will accept returns at the Publisher's expense, provided notice of such damaged or incorrect shipment is given to the Publisher within fourteen (14) working days from the date of receipt.
\\n\\nPublishing errors, including but not limited to typographical errors, having no significant effect on the editorial content or design characteristics of the products, cannot be considered a reason for rejecting payment or, as the case may be, modifying the agreed price.
\\n\\nAt the Publisher's request, the customer should provide evidence of the damaged or incorrect shipment. The Publisher will refund or ship the ordered products without delays.
\\n"}]'},components:[{type:"htmlEditorComponent",content:"Receipt of complaints will be acknowledged in writing and Intech Limited will respond fully to concerns within 15 business days.
\n\nCustomers have the right to terminate the contract without giving any reason (written notice of termination). The deadline for said termination is fourteen (14) days from the date of receipt of goods. Returns are at the expense of the Customer and must be made within the fourteen (14) days from the date of the written notice of termination. Intech Limited will process refunds to the Customer without undue delay.
\n\nIn the event that the Publisher ships damaged or misbound copies of products, or duplicate or incorrect copies of the products are received by the Customer, the Publisher will accept returns at the Publisher's expense, provided notice of such damaged or incorrect shipment is given to the Publisher within fourteen (14) working days from the date of receipt.
\n\nPublishing errors, including but not limited to typographical errors, having no significant effect on the editorial content or design characteristics of the products, cannot be considered a reason for rejecting payment or, as the case may be, modifying the agreed price.
\n\nAt the Publisher's request, the customer should provide evidence of the damaged or incorrect shipment. The Publisher will refund or ship the ordered products without delays.
\n"}]},successStories:{items:[]},authorsAndEditors:{filterParams:{},profiles:[{id:"6700",title:"Dr.",name:"Abbass A.",middleName:null,surname:"Hashim",slug:"abbass-a.-hashim",fullName:"Abbass A. Hashim",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/6700/images/1864_n.jpg",biography:"Currently I am carrying out research in several areas of interest, mainly covering work on chemical and bio-sensors, semiconductor thin film device fabrication and characterisation.\nAt the moment I have very strong interest in radiation environmental pollution and bacteriology treatment. The teams of researchers are working very hard to bring novel results in this field. I am also a member of the team in charge for the supervision of Ph.D. students in the fields of development of silicon based planar waveguide sensor devices, study of inelastic electron tunnelling in planar tunnelling nanostructures for sensing applications and development of organotellurium(IV) compounds for semiconductor applications. I am a specialist in data analysis techniques and nanosurface structure. I have served as the editor for many books, been a member of the editorial board in science journals, have published many papers and hold many patents.",institutionString:null,institution:{name:"Sheffield Hallam University",country:{name:"United Kingdom"}}},{id:"12392",title:"Mr.",name:"Alex",middleName:null,surname:"Lazinica",slug:"alex-lazinica",fullName:"Alex Lazinica",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/12392/images/7282_n.png",biography:"Alex Lazinica is the founder and CEO of IntechOpen. After obtaining a Master's degree in Mechanical Engineering, he continued his PhD studies in Robotics at the Vienna University of Technology. Here he worked as a robotic researcher with the university's Intelligent Manufacturing Systems Group as well as a guest researcher at various European universities, including the Swiss Federal Institute of Technology Lausanne (EPFL). During this time he published more than 20 scientific papers, gave presentations, served as a reviewer for major robotic journals and conferences and most importantly he co-founded and built the International Journal of Advanced Robotic Systems- world's first Open Access journal in the field of robotics. Starting this journal was a pivotal point in his career, since it was a pathway to founding IntechOpen - Open Access publisher focused on addressing academic researchers needs. Alex is a personification of IntechOpen key values being trusted, open and entrepreneurial. Today his focus is on defining the growth and development strategy for the company.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"19816",title:"Prof.",name:"Alexander",middleName:null,surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/19816/images/1607_n.jpg",biography:"Alexander I. Kokorin: born: 1947, Moscow; DSc., PhD; Principal Research Fellow (Research Professor) of Department of Kinetics and Catalysis, N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, Moscow.\r\nArea of research interests: physical chemistry of complex-organized molecular and nanosized systems, including polymer-metal complexes; the surface of doped oxide semiconductors. He is an expert in structural, absorptive, catalytic and photocatalytic properties, in structural organization and dynamic features of ionic liquids, in magnetic interactions between paramagnetic centers. The author or co-author of 3 books, over 200 articles and reviews in scientific journals and books. He is an actual member of the International EPR/ESR Society, European Society on Quantum Solar Energy Conversion, Moscow House of Scientists, of the Board of Moscow Physical Society.",institutionString:null,institution:{name:"Semenov Institute of Chemical Physics",country:{name:"Russia"}}},{id:"62389",title:"PhD.",name:"Ali Demir",middleName:null,surname:"Sezer",slug:"ali-demir-sezer",fullName:"Ali Demir Sezer",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/62389/images/3413_n.jpg",biography:"Dr. Ali Demir Sezer has a Ph.D. from Pharmaceutical Biotechnology at the Faculty of Pharmacy, University of Marmara (Turkey). He is the member of many Pharmaceutical Associations and acts as a reviewer of scientific journals and European projects under different research areas such as: drug delivery systems, nanotechnology and pharmaceutical biotechnology. Dr. Sezer is the author of many scientific publications in peer-reviewed journals and poster communications. Focus of his research activity is drug delivery, physico-chemical characterization and biological evaluation of biopolymers micro and nanoparticles as modified drug delivery system, and colloidal drug carriers (liposomes, nanoparticles etc.).",institutionString:null,institution:{name:"Marmara University",country:{name:"Turkey"}}},{id:"64434",title:"Dr.",name:"Angkoon",middleName:null,surname:"Phinyomark",slug:"angkoon-phinyomark",fullName:"Angkoon Phinyomark",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/64434/images/2619_n.jpg",biography:"My name is Angkoon Phinyomark. I received a B.Eng. degree in Computer Engineering with First Class Honors in 2008 from Prince of Songkla University, Songkhla, Thailand, where I received a Ph.D. degree in Electrical Engineering. My research interests are primarily in the area of biomedical signal processing and classification notably EMG (electromyography signal), EOG (electrooculography signal), and EEG (electroencephalography signal), image analysis notably breast cancer analysis and optical coherence tomography, and rehabilitation engineering. I became a student member of IEEE in 2008. During October 2011-March 2012, I had worked at School of Computer Science and Electronic Engineering, University of Essex, Colchester, Essex, United Kingdom. In addition, during a B.Eng. I had been a visiting research student at Faculty of Computer Science, University of Murcia, Murcia, Spain for three months.\n\nI have published over 40 papers during 5 years in refereed journals, books, and conference proceedings in the areas of electro-physiological signals processing and classification, notably EMG and EOG signals, fractal analysis, wavelet analysis, texture analysis, feature extraction and machine learning algorithms, and assistive and rehabilitative devices. I have several computer programming language certificates, i.e. Sun Certified Programmer for the Java 2 Platform 1.4 (SCJP), Microsoft Certified Professional Developer, Web Developer (MCPD), Microsoft Certified Technology Specialist, .NET Framework 2.0 Web (MCTS). I am a Reviewer for several refereed journals and international conferences, such as IEEE Transactions on Biomedical Engineering, IEEE Transactions on Industrial Electronics, Optic Letters, Measurement Science Review, and also a member of the International Advisory Committee for 2012 IEEE Business Engineering and Industrial Applications and 2012 IEEE Symposium on Business, Engineering and Industrial Applications.",institutionString:null,institution:{name:"Joseph Fourier University",country:{name:"France"}}},{id:"55578",title:"Dr.",name:"Antonio",middleName:null,surname:"Jurado-Navas",slug:"antonio-jurado-navas",fullName:"Antonio Jurado-Navas",position:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRisIQAS/Profile_Picture_1626166543950",biography:"Antonio Jurado-Navas received the M.S. degree (2002) and the Ph.D. degree (2009) in Telecommunication Engineering, both from the University of Málaga (Spain). He first worked as a consultant at Vodafone-Spain. From 2004 to 2011, he was a Research Assistant with the Communications Engineering Department at the University of Málaga. In 2011, he became an Assistant Professor in the same department. From 2012 to 2015, he was with Ericsson Spain, where he was working on geo-location\ntools for third generation mobile networks. Since 2015, he is a Marie-Curie fellow at the Denmark Technical University. His current research interests include the areas of mobile communication systems and channel modeling in addition to atmospheric optical communications, adaptive optics and statistics",institutionString:null,institution:{name:"University of Malaga",country:{name:"Spain"}}},{id:"6495",title:"Dr.",name:"Daniel",middleName:null,surname:"Eberli",slug:"daniel-eberli",fullName:"Daniel Eberli",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/6495/images/1947_n.jpg",biography:"Daniel Eberli MD. Ph.D. is a scientific physician working in the translational field of urologic tissue engineering. He has a medical degree from the Medical School in Zurich, Switzerland, and a Ph.D. in Molecular Medicine from Wake Forest University, Winston Salem, NC. He currently has a faculty position at the Department of Urology at the University Hospital Zurich, where he devotes half of his time to patient care. He is a lecturer at the Medical School of Zurich and the Swiss Federal Institute of Technology. Together with his research team, he is working on novel biomaterials for bladder reconstruction, improving autonomic innervation, cellular treatment of incontinence and tracking of stem cells.",institutionString:null,institution:{name:"University Hospital of Zurich",country:{name:"Switzerland"}}},{id:"122240",title:"Prof.",name:"Frede",middleName:null,surname:"Blaabjerg",slug:"frede-blaabjerg",fullName:"Frede Blaabjerg",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Aalborg University",country:{name:"Denmark"}}},{id:"50823",title:"Prof.",name:"Hamid Reza",middleName:null,surname:"Karimi",slug:"hamid-reza-karimi",fullName:"Hamid Reza Karimi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Polytechnic University of Milan",country:{name:"Italy"}}},{id:"22128",title:"Dr.",name:"Harald",middleName:null,surname:"Haas",slug:"harald-haas",fullName:"Harald Haas",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Edinburgh",country:{name:"United Kingdom"}}},{id:"80399",title:"Dr.",name:"Huosheng",middleName:null,surname:"Hu",slug:"huosheng-hu",fullName:"Huosheng Hu",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"University of Essex",country:{name:"United Kingdom"}}},{id:"135796",title:"Prof.",name:"Jim",middleName:null,surname:"Van Os",slug:"jim-van-os",fullName:"Jim Van Os",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Utrecht University",country:{name:"Netherlands"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:6630},{group:"region",caption:"Middle and South America",value:2,count:5913},{group:"region",caption:"Africa",value:3,count:2404},{group:"region",caption:"Asia",value:4,count:12563},{group:"region",caption:"Australia and Oceania",value:5,count:1009},{group:"region",caption:"Europe",value:6,count:17575}],offset:12,limit:12,total:17575},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{hasNoEditors:"1",sort:"ebgfFaeGuveeFgfcChcyvfu"},books:[],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:43},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:13},{group:"topic",caption:"Business, Management and Economics",value:7,count:4},{group:"topic",caption:"Chemistry",value:8,count:25},{group:"topic",caption:"Computer and Information Science",value:9,count:19},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:19},{group:"topic",caption:"Engineering",value:11,count:65},{group:"topic",caption:"Environmental Sciences",value:12,count:9},{group:"topic",caption:"Immunology and Microbiology",value:13,count:12},{group:"topic",caption:"Materials Science",value:14,count:30},{group:"topic",caption:"Mathematics",value:15,count:11},{group:"topic",caption:"Medicine",value:16,count:128},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:9},{group:"topic",caption:"Neuroscience",value:18,count:3},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:7},{group:"topic",caption:"Physics",value:20,count:12},{group:"topic",caption:"Psychology",value:21,count:9},{group:"topic",caption:"Robotics",value:22,count:3},{group:"topic",caption:"Social Sciences",value:23,count:9},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:3}],offset:0,limit:12,total:null},popularBooks:{featuredBooks:[{type:"book",id:"9974",title:"E-Learning and Digital Education in the Twenty-First Century",subtitle:null,isOpenForSubmission:!1,hash:"88b58d66e975df20425fc1dfd22d53aa",slug:"e-learning-and-digital-education-in-the-twenty-first-century",bookSignature:"M. Mahruf C. Shohel",coverURL:"https://cdn.intechopen.com/books/images_new/9974.jpg",editors:[{id:"94099",title:"Dr.",name:"M. Mahruf C.",middleName:null,surname:"Shohel",slug:"m.-mahruf-c.-shohel",fullName:"M. Mahruf C. Shohel"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11001",title:"Density Functional Theory",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"82d53383af78ab41eb982086c02fb2bb",slug:"density-functional-theory-recent-advances-new-perspectives-and-applications",bookSignature:"Daniel Glossman-Mitnik",coverURL:"https://cdn.intechopen.com/books/images_new/11001.jpg",editors:[{id:"198499",title:"Dr.",name:"Daniel",middleName:null,surname:"Glossman-Mitnik",slug:"daniel-glossman-mitnik",fullName:"Daniel Glossman-Mitnik"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10356",title:"Natural Medicinal Plants",subtitle:null,isOpenForSubmission:!1,hash:"943e56ccaaf19ff696d25aa638ae37d6",slug:"natural-medicinal-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/10356.jpg",editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11752",title:"Natural Drugs from Plants",subtitle:null,isOpenForSubmission:!1,hash:"a0a83c0822608ef7592bf16a5ed0ada4",slug:"natural-drugs-from-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/11752.jpg",editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10251",title:"Plankton Communities",subtitle:null,isOpenForSubmission:!1,hash:"e11e441ca2d2d5f631b1b4704505cfb6",slug:"plankton-communities",bookSignature:"Leonel Pereira and Ana Marta Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/10251.jpg",editors:[{id:"279788",title:"Dr.",name:"Leonel",middleName:null,surname:"Pereira",slug:"leonel-pereira",fullName:"Leonel Pereira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10830",title:"Animal Feed Science and Nutrition",subtitle:"Production, Health and Environment",isOpenForSubmission:!1,hash:"79944fc8fbbaa329aed6fde388154832",slug:"animal-feed-science-and-nutrition-production-health-and-environment",bookSignature:"Amlan Kumar Patra",coverURL:"https://cdn.intechopen.com/books/images_new/10830.jpg",editors:[{id:"310962",title:"Dr.",name:"Amlan",middleName:"Kumar",surname:"Patra",slug:"amlan-patra",fullName:"Amlan Patra"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10584",title:"Engineered Wood Products for Construction",subtitle:null,isOpenForSubmission:!1,hash:"421757c56a3735986055250821275a51",slug:"engineered-wood-products-for-construction",bookSignature:"Meng Gong",coverURL:"https://cdn.intechopen.com/books/images_new/10584.jpg",editors:[{id:"274242",title:"Dr.",name:"Meng",middleName:null,surname:"Gong",slug:"meng-gong",fullName:"Meng Gong"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9670",title:"Current Trends in Wheat Research",subtitle:null,isOpenForSubmission:!1,hash:"89d795987f1747a76eee532700d2093d",slug:"current-trends-in-wheat-research",bookSignature:"Mahmood-ur-Rahman Ansari",coverURL:"https://cdn.intechopen.com/books/images_new/9670.jpg",editors:[{id:"185476",title:"Dr.",name:"Mahmood-ur-Rahman",middleName:null,surname:"Ansari",slug:"mahmood-ur-rahman-ansari",fullName:"Mahmood-ur-Rahman Ansari"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9032",title:"Corporate Social Responsibility",subtitle:null,isOpenForSubmission:!1,hash:"f609bf3251d7cc7bae0099a4374adfc3",slug:"corporate-social-responsibility",bookSignature:"Beatrice Orlando",coverURL:"https://cdn.intechopen.com/books/images_new/9032.jpg",editors:[{id:"232969",title:"Prof.",name:"Beatrice",middleName:null,surname:"Orlando",slug:"beatrice-orlando",fullName:"Beatrice Orlando"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10681",title:"Biodegradation Technology of Organic and Inorganic Pollutants",subtitle:null,isOpenForSubmission:!1,hash:"9a6e10e02788092872fd249436898e97",slug:"biodegradation-technology-of-organic-and-inorganic-pollutants",bookSignature:"Kassio Ferreira Mendes, Rodrigo Nogueira de Sousa and Kamila Cabral Mielke",coverURL:"https://cdn.intechopen.com/books/images_new/10681.jpg",editors:[{id:"197720",title:"Ph.D.",name:"Kassio",middleName:null,surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9808",title:"Contemporary Topics in Patient Safety",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"fb6371607c2c6c02c6a2af8892765aba",slug:"contemporary-topics-in-patient-safety-volume-1",bookSignature:"Stanislaw P. Stawicki and Michael S. Firstenberg",coverURL:"https://cdn.intechopen.com/books/images_new/9808.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9544",title:"Global Trade in the Emerging Business Environment",subtitle:null,isOpenForSubmission:!1,hash:"fb8cb09b9599246add78d508a98273d5",slug:"global-trade-in-the-emerging-business-environment",bookSignature:"Muhammad Mohiuddin, Jingbin Wang , Md. Samim Al Azad and Selim Ahmed",coverURL:"https://cdn.intechopen.com/books/images_new/9544.jpg",editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:4387},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"9974",title:"E-Learning and Digital Education in the Twenty-First Century",subtitle:null,isOpenForSubmission:!1,hash:"88b58d66e975df20425fc1dfd22d53aa",slug:"e-learning-and-digital-education-in-the-twenty-first-century",bookSignature:"M. Mahruf C. Shohel",coverURL:"https://cdn.intechopen.com/books/images_new/9974.jpg",publishedDate:"May 18th 2022",numberOfDownloads:3385,editors:[{id:"94099",title:"Dr.",name:"M. Mahruf C.",middleName:null,surname:"Shohel",slug:"m.-mahruf-c.-shohel",fullName:"M. Mahruf C. Shohel"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11001",title:"Density Functional Theory",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"82d53383af78ab41eb982086c02fb2bb",slug:"density-functional-theory-recent-advances-new-perspectives-and-applications",bookSignature:"Daniel Glossman-Mitnik",coverURL:"https://cdn.intechopen.com/books/images_new/11001.jpg",publishedDate:"May 18th 2022",numberOfDownloads:1875,editors:[{id:"198499",title:"Dr.",name:"Daniel",middleName:null,surname:"Glossman-Mitnik",slug:"daniel-glossman-mitnik",fullName:"Daniel Glossman-Mitnik"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10356",title:"Natural Medicinal Plants",subtitle:null,isOpenForSubmission:!1,hash:"943e56ccaaf19ff696d25aa638ae37d6",slug:"natural-medicinal-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/10356.jpg",publishedDate:"May 11th 2022",numberOfDownloads:3842,editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"11752",title:"Natural Drugs from Plants",subtitle:null,isOpenForSubmission:!1,hash:"a0a83c0822608ef7592bf16a5ed0ada4",slug:"natural-drugs-from-plants",bookSignature:"Hany A. El-Shemy",coverURL:"https://cdn.intechopen.com/books/images_new/11752.jpg",publishedDate:"May 11th 2022",numberOfDownloads:3008,editors:[{id:"54719",title:"Prof.",name:"Hany",middleName:null,surname:"El-Shemy",slug:"hany-el-shemy",fullName:"Hany El-Shemy"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10251",title:"Plankton Communities",subtitle:null,isOpenForSubmission:!1,hash:"e11e441ca2d2d5f631b1b4704505cfb6",slug:"plankton-communities",bookSignature:"Leonel Pereira and Ana Marta Gonçalves",coverURL:"https://cdn.intechopen.com/books/images_new/10251.jpg",publishedDate:"May 18th 2022",numberOfDownloads:1109,editors:[{id:"279788",title:"Dr.",name:"Leonel",middleName:null,surname:"Pereira",slug:"leonel-pereira",fullName:"Leonel Pereira"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10830",title:"Animal Feed Science and Nutrition",subtitle:"Production, Health and Environment",isOpenForSubmission:!1,hash:"79944fc8fbbaa329aed6fde388154832",slug:"animal-feed-science-and-nutrition-production-health-and-environment",bookSignature:"Amlan Kumar Patra",coverURL:"https://cdn.intechopen.com/books/images_new/10830.jpg",publishedDate:"May 18th 2022",numberOfDownloads:1010,editors:[{id:"310962",title:"Dr.",name:"Amlan",middleName:"Kumar",surname:"Patra",slug:"amlan-patra",fullName:"Amlan Patra"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10584",title:"Engineered Wood Products for Construction",subtitle:null,isOpenForSubmission:!1,hash:"421757c56a3735986055250821275a51",slug:"engineered-wood-products-for-construction",bookSignature:"Meng Gong",coverURL:"https://cdn.intechopen.com/books/images_new/10584.jpg",publishedDate:"April 28th 2022",numberOfDownloads:3918,editors:[{id:"274242",title:"Dr.",name:"Meng",middleName:null,surname:"Gong",slug:"meng-gong",fullName:"Meng Gong"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9670",title:"Current Trends in Wheat Research",subtitle:null,isOpenForSubmission:!1,hash:"89d795987f1747a76eee532700d2093d",slug:"current-trends-in-wheat-research",bookSignature:"Mahmood-ur-Rahman Ansari",coverURL:"https://cdn.intechopen.com/books/images_new/9670.jpg",publishedDate:"May 11th 2022",numberOfDownloads:1654,editors:[{id:"185476",title:"Dr.",name:"Mahmood-ur-Rahman",middleName:null,surname:"Ansari",slug:"mahmood-ur-rahman-ansari",fullName:"Mahmood-ur-Rahman Ansari"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9032",title:"Corporate Social Responsibility",subtitle:null,isOpenForSubmission:!1,hash:"f609bf3251d7cc7bae0099a4374adfc3",slug:"corporate-social-responsibility",bookSignature:"Beatrice Orlando",coverURL:"https://cdn.intechopen.com/books/images_new/9032.jpg",publishedDate:"March 16th 2022",numberOfDownloads:7686,editors:[{id:"232969",title:"Prof.",name:"Beatrice",middleName:null,surname:"Orlando",slug:"beatrice-orlando",fullName:"Beatrice Orlando"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10681",title:"Biodegradation Technology of Organic and Inorganic Pollutants",subtitle:null,isOpenForSubmission:!1,hash:"9a6e10e02788092872fd249436898e97",slug:"biodegradation-technology-of-organic-and-inorganic-pollutants",bookSignature:"Kassio Ferreira Mendes, Rodrigo Nogueira de Sousa and Kamila Cabral Mielke",coverURL:"https://cdn.intechopen.com/books/images_new/10681.jpg",publishedDate:"April 20th 2022",numberOfDownloads:3444,editors:[{id:"197720",title:"Ph.D.",name:"Kassio",middleName:null,surname:"Ferreira Mendes",slug:"kassio-ferreira-mendes",fullName:"Kassio Ferreira Mendes"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"10522",title:"Coding Theory",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"6357e1dd7d38adeb519ca7a10dc9e5a0",slug:"coding-theory-recent-advances-new-perspectives-and-applications",bookSignature:"Sudhakar Radhakrishnan and Sudev Naduvath",coverURL:"https://cdn.intechopen.com/books/images_new/10522.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"26327",title:"Dr.",name:"Sudhakar",middleName:null,surname:"Radhakrishnan",slug:"sudhakar-radhakrishnan",fullName:"Sudhakar Radhakrishnan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10821",title:"Automation and Control",subtitle:"Theories and Applications",isOpenForSubmission:!1,hash:"18463c2291ba306c4dcbabd988227eea",slug:"automation-and-control-theories-and-applications",bookSignature:"Elmer P. Dadios",coverURL:"https://cdn.intechopen.com/books/images_new/10821.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"111683",title:"Prof.",name:"Elmer P.",middleName:"P.",surname:"Dadios",slug:"elmer-p.-dadios",fullName:"Elmer P. Dadios"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11348",title:"Mutagenesis and Mitochondrial-Associated Pathologies",subtitle:null,isOpenForSubmission:!1,hash:"001972b3c5b49367314b13025a449232",slug:"mutagenesis-and-mitochondrial-associated-pathologies",bookSignature:"Michael Fasullo and Angel Catala",coverURL:"https://cdn.intechopen.com/books/images_new/11348.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"258231",title:"Dr.",name:"Michael",middleName:"Thomas",surname:"Fasullo",slug:"michael-fasullo",fullName:"Michael Fasullo"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"11123",title:"Epoxy-Based Composites",subtitle:null,isOpenForSubmission:!1,hash:"c1c5447cf3b9d6c7688276ac30e80de6",slug:"epoxy-based-composites",bookSignature:"Samson Jerold Samuel Chelladurai, Ramesh Arthanari and M.R.Meera",coverURL:"https://cdn.intechopen.com/books/images_new/11123.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"247421",title:"Dr.",name:"Samson Jerold Samuel",middleName:null,surname:"Chelladurai",slug:"samson-jerold-samuel-chelladurai",fullName:"Samson Jerold Samuel Chelladurai"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10632",title:"Theory and Practice of Tunnel Engineering",subtitle:null,isOpenForSubmission:!1,hash:"7ba17749f9d0b6a62d584a3c320a1f49",slug:"theory-and-practice-of-tunnel-engineering",bookSignature:"Hasan Tosun",coverURL:"https://cdn.intechopen.com/books/images_new/10632.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"79083",title:"Prof.",name:"Hasan",middleName:null,surname:"Tosun",slug:"hasan-tosun",fullName:"Hasan Tosun"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10906",title:"Fungal Reproduction and Growth",subtitle:null,isOpenForSubmission:!1,hash:"f84de0280d54f3b52e3e4585cff24ac1",slug:"fungal-reproduction-and-growth",bookSignature:"Sadia Sultan and Gurmeet Kaur Surindar Singh",coverURL:"https://cdn.intechopen.com/books/images_new/10906.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"176737",title:"Dr.",name:"Sadia",middleName:null,surname:"Sultan",slug:"sadia-sultan",fullName:"Sadia Sultan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10914",title:"Effective Elimination of Structural Racism",subtitle:null,isOpenForSubmission:!1,hash:"f6a2562646c0fd664aca8335bc3b3e69",slug:"effective-elimination-of-structural-racism",bookSignature:"Erick Guerrero",coverURL:"https://cdn.intechopen.com/books/images_new/10914.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"294761",title:"Dr.",name:"Erick",middleName:null,surname:"Guerrero",slug:"erick-guerrero",fullName:"Erick Guerrero"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10664",title:"Animal Reproduction",subtitle:null,isOpenForSubmission:!1,hash:"2d66af42fb17d0a6556bb9ef28e273c7",slug:"animal-reproduction",bookSignature:"Yusuf Bozkurt and Mustafa Numan Bucak",coverURL:"https://cdn.intechopen.com/books/images_new/10664.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"90846",title:"Prof.",name:"Yusuf",middleName:null,surname:"Bozkurt",slug:"yusuf-bozkurt",fullName:"Yusuf Bozkurt"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10940",title:"Plant Hormones",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"5aae8a345f8047ed528914ff3491f643",slug:"plant-hormones-recent-advances-new-perspectives-and-applications",bookSignature:"Christophe Hano",coverURL:"https://cdn.intechopen.com/books/images_new/10940.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"313856",title:"Dr.",name:"Christophe",middleName:"F.E.",surname:"Hano",slug:"christophe-hano",fullName:"Christophe Hano"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10207",title:"Sexual Abuse",subtitle:"An Interdisciplinary Approach",isOpenForSubmission:!1,hash:"e1ec1d5a7093490df314d7887e0b3809",slug:"sexual-abuse-an-interdisciplinary-approach",bookSignature:"Ersi Kalfoğlu and Sotirios Kalfoglou",coverURL:"https://cdn.intechopen.com/books/images_new/10207.jpg",editedByType:"Edited by",publishedDate:"May 25th 2022",editors:[{id:"68678",title:"Dr.",name:"Ersi",middleName:null,surname:"Kalfoglou",slug:"ersi-kalfoglou",fullName:"Ersi Kalfoglou"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"1226",title:"Optoelectronics",slug:"optics-and-lasers-optoelectronics",parent:{id:"228",title:"Optics and Lasers",slug:"optics-and-lasers"},numberOfBooks:50,numberOfSeries:0,numberOfAuthorsAndEditors:1646,numberOfWosCitations:2706,numberOfCrossrefCitations:1055,numberOfDimensionsCitations:2423,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicId:"1226",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"10017",title:"Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"e20f25706d03f0c52ac852f7fa2375e7",slug:"optoelectronics",bookSignature:"Mike Haidar Shahine",coverURL:"https://cdn.intechopen.com/books/images_new/10017.jpg",editedByType:"Edited by",editors:[{id:"102474",title:"Dr.",name:"Mike Haidar",middleName:null,surname:"Shahine",slug:"mike-haidar-shahine",fullName:"Mike Haidar Shahine"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9272",title:"Optical Fiber Applications",subtitle:null,isOpenForSubmission:!1,hash:"dd156cc0568d8a4204d9f13609d8ff9e",slug:"optical-fiber-applications",bookSignature:"Guillermo Huerta-Cuellar and Roghayeh Imani",coverURL:"https://cdn.intechopen.com/books/images_new/9272.jpg",editedByType:"Edited by",editors:[{id:"237167",title:"Dr.",name:"Guillermo",middleName:null,surname:"Huerta-Cuellar",slug:"guillermo-huerta-cuellar",fullName:"Guillermo Huerta-Cuellar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8271",title:"Applications of Optical Fibers for Sensing",subtitle:null,isOpenForSubmission:!1,hash:"9ee77f1939cbc876443b1f57acc998f4",slug:"applications-of-optical-fibers-for-sensing",bookSignature:"Christian Cuadrado-Laborde",coverURL:"https://cdn.intechopen.com/books/images_new/8271.jpg",editedByType:"Edited by",editors:[{id:"220902",title:"Dr.",name:"Christian",middleName:null,surname:"Cuadrado-Laborde",slug:"christian-cuadrado-laborde",fullName:"Christian Cuadrado-Laborde"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7215",title:"Recent Developments in Photovoltaic Materials and Devices",subtitle:null,isOpenForSubmission:!1,hash:"2f824828c2212e79b75fa65b194c5007",slug:"recent-developments-in-photovoltaic-materials-and-devices",bookSignature:"Natarajan Prabaharan, Marc A. Rosen and Pietro Elia Campana",coverURL:"https://cdn.intechopen.com/books/images_new/7215.jpg",editedByType:"Edited by",editors:[{id:"199317",title:"Dr.",name:"Natarajan",middleName:null,surname:"Prabaharan",slug:"natarajan-prabaharan",fullName:"Natarajan Prabaharan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6721",title:"Recent Development in Optoelectronic Devices",subtitle:null,isOpenForSubmission:!1,hash:"def40c497adc4bbd238eff98710c4ed1",slug:"recent-development-in-optoelectronic-devices",bookSignature:"Ruby Srivastava",coverURL:"https://cdn.intechopen.com/books/images_new/6721.jpg",editedByType:"Edited by",editors:[{id:"185788",title:"Dr.",name:"Ruby",middleName:null,surname:"Srivastava",slug:"ruby-srivastava",fullName:"Ruby Srivastava"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6131",title:"Two-dimensional Materials for Photodetector",subtitle:null,isOpenForSubmission:!1,hash:"a7001aaeda2624ae9642aacac85e97f0",slug:"two-dimensional-materials-for-photodetector",bookSignature:"Pramoda Kumar Nayak",coverURL:"https://cdn.intechopen.com/books/images_new/6131.jpg",editedByType:"Edited by",editors:[{id:"38997",title:"Dr.",name:"Pramoda Kumar",middleName:null,surname:"Nayak",slug:"pramoda-kumar-nayak",fullName:"Pramoda Kumar Nayak"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"6183",title:"Selected Topics on Optical Fiber Technologies and Applications",subtitle:null,isOpenForSubmission:!1,hash:"a093595712f2523164123391d74553c8",slug:"selected-topics-on-optical-fiber-technologies-and-applications",bookSignature:"Fei Xu and Chengbo Mou",coverURL:"https://cdn.intechopen.com/books/images_new/6183.jpg",editedByType:"Edited by",editors:[{id:"87032",title:"Prof.",name:"Fei",middleName:null,surname:"Xu",slug:"fei-xu",fullName:"Fei Xu"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5818",title:"Ellipsometry",subtitle:"Principles and Techniques for Materials Characterization",isOpenForSubmission:!1,hash:"926e9170fcabb02ff533001ecb5055e0",slug:"ellipsometry-principles-and-techniques-for-materials-characterization",bookSignature:"Faustino Wahaia",coverURL:"https://cdn.intechopen.com/books/images_new/5818.jpg",editedByType:"Edited by",editors:[{id:"188029",title:"Dr.",name:"Faustino",middleName:null,surname:"Wahaia",slug:"faustino-wahaia",fullName:"Faustino Wahaia"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5389",title:"Quantum Cascade Lasers",subtitle:null,isOpenForSubmission:!1,hash:"220b81ff5b943083a64756e19bf1fab7",slug:"quantum-cascade-lasers",bookSignature:"Vasilios N. Stavrou",coverURL:"https://cdn.intechopen.com/books/images_new/5389.jpg",editedByType:"Edited by",editors:[{id:"99725",title:"Dr.",name:"Vasilios N.",middleName:null,surname:"Stavrou",slug:"vasilios-n.-stavrou",fullName:"Vasilios N. Stavrou"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5601",title:"Optical Interferometry",subtitle:null,isOpenForSubmission:!1,hash:"2cd770dd448028c3f8910dd8616dae4e",slug:"optical-interferometry",bookSignature:"Alexander A. Banishev, Mithun Bhowmick and Jue Wang",coverURL:"https://cdn.intechopen.com/books/images_new/5601.jpg",editedByType:"Edited by",editors:[{id:"113982",title:"Dr.",name:"Alexandr",middleName:"A.",surname:"Banishev",slug:"alexandr-banishev",fullName:"Alexandr Banishev"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5371",title:"X-ray Scattering",subtitle:null,isOpenForSubmission:!1,hash:"af21d4ead14637fcfa5f919430ec45f5",slug:"x-ray-scattering",bookSignature:"Alicia Esther Ares",coverURL:"https://cdn.intechopen.com/books/images_new/5371.jpg",editedByType:"Edited by",editors:[{id:"91095",title:"Dr.",name:"Alicia Esther",middleName:null,surname:"Ares",slug:"alicia-esther-ares",fullName:"Alicia Esther Ares"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5376",title:"Applications of Laser Ablation",subtitle:"Thin Film Deposition, Nanomaterial Synthesis and Surface Modification",isOpenForSubmission:!1,hash:"7ea5104a7037f15e68fcc05be277fa37",slug:"applications-of-laser-ablation-thin-film-deposition-nanomaterial-synthesis-and-surface-modification",bookSignature:"Dongfang Yang",coverURL:"https://cdn.intechopen.com/books/images_new/5376.jpg",editedByType:"Edited by",editors:[{id:"177814",title:"Dr.",name:"Dongfang",middleName:null,surname:"Yang",slug:"dongfang-yang",fullName:"Dongfang Yang"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:50,seriesByTopicCollection:[],seriesByTopicTotal:0,mostCitedChapters:[{id:"30963",doi:"10.5772/34176",title:"Microstructural and Mineralogical Characterization of Clay Stabilized Using Calcium-Based Stabilizers",slug:"microstructural-and-mineralogical-characterization-of-clay-stabilized-using-calcium-based-stabilizer",totalDownloads:6777,totalCrossrefCites:29,totalDimensionsCites:48,abstract:null,book:{id:"1505",slug:"scanning-electron-microscopy",title:"Scanning Electron Microscopy",fullTitle:"Scanning Electron Microscopy"},signatures:"Pranshoo Solanki and Musharraf Zaman",authors:[{id:"20942",title:"Prof.",name:"Pranshoo",middleName:null,surname:"Solanki",slug:"pranshoo-solanki",fullName:"Pranshoo Solanki"},{id:"20945",title:"Prof.",name:"Musharraf",middleName:null,surname:"Zaman",slug:"musharraf-zaman",fullName:"Musharraf Zaman"}]},{id:"26791",doi:"10.5772/28067",title:"Optical Vortices in a Fiber: Mode Division Multiplexing and Multimode Self-Imaging",slug:"optical-vortices-in-a-fiber-mode-division-multiplexing-and-multimode-self-reproducing",totalDownloads:4515,totalCrossrefCites:29,totalDimensionsCites:47,abstract:null,book:{id:"2018",slug:"recent-progress-in-optical-fiber-research",title:"Recent Progress in Optical Fiber Research",fullTitle:"Recent Progress in Optical Fiber Research"},signatures:"S.N. Khonina, N.L. Kazanskiy and V.A. Soifer",authors:[{id:"72613",title:"Prof.",name:"Svetlana",middleName:null,surname:"Khonina",slug:"svetlana-khonina",fullName:"Svetlana Khonina"}]},{id:"42033",doi:"10.5772/53897",title:"Photonic Crystals for Optical Sensing: A Review",slug:"photonic-crystals-for-optical-sensing-a-review",totalDownloads:5981,totalCrossrefCites:23,totalDimensionsCites:42,abstract:null,book:{id:"3486",slug:"advances-in-photonic-crystals",title:"Advances in Photonic Crystals",fullTitle:"Advances in Photonic Crystals"},signatures:"Benedetto Troia, Antonia Paolicelli, Francesco De Leonardis and Vittorio M. N. Passaro",authors:[{id:"83905",title:"Prof.",name:"Vittorio",middleName:"M. N.",surname:"Passaro",slug:"vittorio-passaro",fullName:"Vittorio Passaro"}]},{id:"38815",doi:"10.5772/51665",title:"Advances in Infrared Detector Array Technology",slug:"advances-in-infrared-detector-array-technology",totalDownloads:10664,totalCrossrefCites:12,totalDimensionsCites:41,abstract:null,book:{id:"3166",slug:"optoelectronics-advanced-materials-and-devices",title:"Optoelectronics",fullTitle:"Optoelectronics - Advanced Materials and Devices"},signatures:"Nibir K. Dhar, Ravi Dat and Ashok K. Sood",authors:[{id:"23657",title:"Dr.",name:"Ashok K.",middleName:"K",surname:"Sood",slug:"ashok-k.-sood",fullName:"Ashok K. Sood"},{id:"60603",title:"Dr.",name:"Nibir",middleName:null,surname:"Dhar",slug:"nibir-dhar",fullName:"Nibir Dhar"}]},{id:"38543",doi:"10.5772/48331",title:"Application of FTIR Spectroscopy in Environmental Studies",slug:"application-of-ftir-spectroscopy-in-environmental-studies",totalDownloads:27608,totalCrossrefCites:9,totalDimensionsCites:40,abstract:null,book:{id:"2397",slug:"advanced-aspects-of-spectroscopy",title:"Advanced Aspects of Spectroscopy",fullTitle:"Advanced Aspects of Spectroscopy"},signatures:"Claudia Maria Simonescu",authors:[{id:"142381",title:"Dr.",name:"Claudia Maria",middleName:null,surname:"Simonescu",slug:"claudia-maria-simonescu",fullName:"Claudia Maria Simonescu"}]}],mostDownloadedChaptersLast30Days:[{id:"52164",title:"An Overview on Quantum Cascade Lasers: Origins and Development",slug:"an-overview-on-quantum-cascade-lasers-origins-and-development",totalDownloads:3177,totalCrossrefCites:1,totalDimensionsCites:10,abstract:"This chapter presents an introductory review on quantum cascade lasers (QCLs). An overview is prefaced, including a brief description of their beginnings and operating basics. Materials used, as well as growth methods, are also described. The possibility of developing GaN-based QCLs is also shown. Summarizing, the applications of these structures cover a broad range, including spectroscopy, free-space communication, as well as applications to near-space radar and chemical/biological detection. Furthermore, a number of state-of-the-art applications are described in different fields, and finally a brief assessment of the possibilities of volume production and the overall state of the art in QCLs research are elaborated.",book:{id:"5389",slug:"quantum-cascade-lasers",title:"Quantum Cascade Lasers",fullTitle:"Quantum Cascade Lasers"},signatures:"Raúl Pecharromán-Gallego",authors:[{id:"188866",title:"Dr.",name:"Raúl",middleName:null,surname:"Pecharromán-Gallego",slug:"raul-pecharroman-gallego",fullName:"Raúl Pecharromán-Gallego"}]},{id:"38543",title:"Application of FTIR Spectroscopy in Environmental Studies",slug:"application-of-ftir-spectroscopy-in-environmental-studies",totalDownloads:27612,totalCrossrefCites:9,totalDimensionsCites:40,abstract:null,book:{id:"2397",slug:"advanced-aspects-of-spectroscopy",title:"Advanced Aspects of Spectroscopy",fullTitle:"Advanced Aspects of Spectroscopy"},signatures:"Claudia Maria Simonescu",authors:[{id:"142381",title:"Dr.",name:"Claudia Maria",middleName:null,surname:"Simonescu",slug:"claudia-maria-simonescu",fullName:"Claudia Maria Simonescu"}]},{id:"38537",title:"Electronic (Absorption) Spectra of 3d Transition Metal Complexes",slug:"electronic-absorption-spectra-of-3d-transition-metal-complexes",totalDownloads:47457,totalCrossrefCites:8,totalDimensionsCites:14,abstract:null,book:{id:"2397",slug:"advanced-aspects-of-spectroscopy",title:"Advanced Aspects of Spectroscopy",fullTitle:"Advanced Aspects of Spectroscopy"},signatures:"S. Lakshmi Reddy, Tamio Endo and G. Siva Reddy",authors:[{id:"149356",title:"Dr.",name:"Lakshmi",middleName:null,surname:"Reddy",slug:"lakshmi-reddy",fullName:"Lakshmi Reddy"},{id:"149357",title:"Prof.",name:"Tamio",middleName:null,surname:"Endo",slug:"tamio-endo",fullName:"Tamio Endo"},{id:"149358",title:"Prof.",name:"Siva Reddy.",middleName:null,surname:"G",slug:"siva-reddy.-g",fullName:"Siva Reddy. G"}]},{id:"40342",title:"Innovative Exploitation of Grating-Coupled Surface Plasmon Resonance for Sensing",slug:"innovative-exploitation-of-grating-coupled-surface-plasmon-resonance-for-sensing",totalDownloads:4060,totalCrossrefCites:2,totalDimensionsCites:6,abstract:null,book:{id:"2245",slug:"plasmonics-principles-and-applications",title:"Plasmonics",fullTitle:"Plasmonics - Principles and Applications"},signatures:"G. Ruffato, G. Zacco and F. Romanato",authors:[{id:"150700",title:"Ph.D.",name:"Gianluca",middleName:null,surname:"Ruffato",slug:"gianluca-ruffato",fullName:"Gianluca Ruffato"},{id:"151012",title:"Dr.",name:"Gabriele",middleName:null,surname:"Zacco",slug:"gabriele-zacco",fullName:"Gabriele Zacco"},{id:"151013",title:"Prof.",name:"Filippo",middleName:null,surname:"Romanato",slug:"filippo-romanato",fullName:"Filippo Romanato"}]},{id:"51638",title:"Quantum Image-Forming Theory for Calculation of Resolution Limit in Laser Microscopy",slug:"quantum-image-forming-theory-for-calculation-of-resolution-limit-in-laser-microscopy",totalDownloads:2095,totalCrossrefCites:0,totalDimensionsCites:3,abstract:"Here we show what determines the optical resolution in laser microscopy. We define the expanded resolution limit (spatial frequency cutoff ) that includes the classic Abbe definition as 2 NA/λ, where λ is the wavelength. The resolution limit can approximately be redefined as the frequency cutoff αNA/λ, where α is the constant that depends on the optical process occurring in the sample. In the case of the optical process originating from the linear susceptibility χ(1), the resolution limit is well known as the Abbe definition, namely, α = 2. However, when other optical processes are harnessed to form the image through laser microscopy, the resolution limit can differ. We formulate a theoretical framework that can calculate the expanded resolution limits of all kinds of laser microscopy utilizing coherent, incoherent, linear, and nonlinear optical processes.",book:{id:"5201",slug:"microscopy-and-analysis",title:"Microscopy and Analysis",fullTitle:"Microscopy and Analysis"},signatures:"Naoki Fukutake",authors:[{id:"180665",title:"Dr.",name:"Naoki",middleName:null,surname:"Fukutake",slug:"naoki-fukutake",fullName:"Naoki Fukutake"}]}],onlineFirstChaptersFilter:{topicId:"1226",limit:6,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},subscriptionForm:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[],offset:8,limit:8,total:0},allSeries:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:9,numberOfPublishedChapters:87,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:99,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:27,numberOfPublishedChapters:290,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:9,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:11,numberOfPublishedChapters:139,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:8,numberOfPublishedChapters:129,numberOfOpenTopics:0,numberOfUpcomingTopics:2,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!1},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:108,numberOfOpenTopics:3,numberOfUpcomingTopics:1,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:11,numberOfPublishedChapters:104,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:12,numberOfOpenTopics:2,numberOfUpcomingTopics:1,issn:"2753-894X",doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:1,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!1},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:0,numberOfPublishedChapters:12,numberOfOpenTopics:5,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],testimonialsList:[{id:"6",text:"It is great to work with the IntechOpen to produce a worthwhile collection of research that also becomes a great educational resource and guide for future research endeavors.",author:{id:"259298",name:"Edward",surname:"Narayan",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/259298/images/system/259298.jpeg",slug:"edward-narayan",institution:{id:"3",name:"University of Queensland",country:{id:null,name:"Australia"}}}},{id:"13",text:"The collaboration with and support of the technical staff of IntechOpen is fantastic. The whole process of submitting an article and editing of the submitted article goes extremely smooth and fast, the number of reads and downloads of chapters is high, and the contributions are also frequently cited.",author:{id:"55578",name:"Antonio",surname:"Jurado-Navas",institutionString:null,profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRisIQAS/Profile_Picture_1626166543950",slug:"antonio-jurado-navas",institution:{id:"720",name:"University of Malaga",country:{id:null,name:"Spain"}}}}]},series:{item:{id:"7",title:"Biomedical Engineering",doi:"10.5772/intechopen.71985",issn:"2631-5343",scope:"Biomedical Engineering is one of the fastest-growing interdisciplinary branches of science and industry. The combination of electronics and computer science with biology and medicine has improved patient diagnosis, reduced rehabilitation time, and helped to facilitate a better quality of life. Nowadays, all medical imaging devices, medical instruments, or new laboratory techniques result from the cooperation of specialists in various fields. The series of Biomedical Engineering books covers such areas of knowledge as chemistry, physics, electronics, medicine, and biology. This series is intended for doctors, engineers, and scientists involved in biomedical engineering or those wanting to start working in this field.",coverUrl:"https://cdn.intechopen.com/series/covers/7.jpg",latestPublicationDate:"May 25th, 2022",hasOnlineFirst:!0,numberOfPublishedBooks:12,editor:{id:"50150",title:"Prof.",name:"Robert",middleName:null,surname:"Koprowski",slug:"robert-koprowski",fullName:"Robert Koprowski",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYTYNQA4/Profile_Picture_1630478535317",biography:"Robert Koprowski, MD (1997), PhD (2003), Habilitation (2015), is an employee of the University of Silesia, Poland, Institute of Computer Science, Department of Biomedical Computer Systems. For 20 years, he has studied the analysis and processing of biomedical images, emphasizing the full automation of measurement for a large inter-individual variability of patients. Dr. Koprowski has authored more than a hundred research papers with dozens in impact factor (IF) journals and has authored or co-authored six books. Additionally, he is the author of several national and international patents in the field of biomedical devices and imaging. Since 2011, he has been a reviewer of grants and projects (including EU projects) in biomedical engineering.",institutionString:null,institution:{name:"University of Silesia",institutionURL:null,country:{name:"Poland"}}},editorTwo:null,editorThree:null},subseries:{paginationCount:3,paginationItems:[{id:"7",title:"Bioinformatics and Medical Informatics",coverUrl:"https://cdn.intechopen.com/series_topics/covers/7.jpg",isOpenForSubmission:!0,editor:{id:"351533",title:"Dr.",name:"Slawomir",middleName:null,surname:"Wilczynski",slug:"slawomir-wilczynski",fullName:"Slawomir Wilczynski",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000035U1loQAC/Profile_Picture_1630074514792",biography:"Professor Sławomir Wilczyński, Head of the Chair of Department of Basic Biomedical Sciences, Faculty of Pharmaceutical Sciences, Medical University of Silesia in Katowice, Poland. His research interests are focused on modern imaging methods used in medicine and pharmacy, including in particular hyperspectral imaging, dynamic thermovision analysis, high-resolution ultrasound, as well as other techniques such as EPR, NMR and hemispheric directional reflectance. Author of over 100 scientific works, patents and industrial designs. Expert of the Polish National Center for Research and Development, Member of the Investment Committee in the Bridge Alfa NCBiR program, expert of the Polish Ministry of Funds and Regional Policy, Polish Medical Research Agency. Editor-in-chief of the journal in the field of aesthetic medicine and dermatology - Aesthetica.",institutionString:null,institution:{name:"Medical University of Silesia",institutionURL:null,country:{name:"Poland"}}},editorTwo:null,editorThree:null},{id:"8",title:"Bioinspired Technology and Biomechanics",coverUrl:"https://cdn.intechopen.com/series_topics/covers/8.jpg",isOpenForSubmission:!0,editor:{id:"144937",title:"Prof.",name:"Adriano",middleName:"De Oliveira",surname:"Andrade",slug:"adriano-andrade",fullName:"Adriano Andrade",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRC8QQAW/Profile_Picture_1625219101815",biography:"Dr. Adriano de Oliveira Andrade graduated in Electrical Engineering at the Federal University of Goiás (Brazil) in 1997. He received his MSc and PhD in Biomedical Engineering respectively from the Federal University of Uberlândia (UFU, Brazil) in 2000 and from the University of Reading (UK) in 2005. He completed a one-year Post-Doctoral Fellowship awarded by the DFAIT (Foreign Affairs and International Trade Canada) at the Institute of Biomedical Engineering of the University of New Brunswick (Canada) in 2010. Currently, he is Professor in the Faculty of Electrical Engineering (UFU). He has authored and co-authored more than 200 peer-reviewed publications in Biomedical Engineering. He has been a researcher of The National Council for Scientific and Technological Development (CNPq-Brazil) since 2009. He has served as an ad-hoc consultant for CNPq, CAPES (Coordination for the Improvement of Higher Education Personnel), FINEP (Brazilian Innovation Agency), and other funding bodies on several occasions. He was the Secretary of the Brazilian Society of Biomedical Engineering (SBEB) from 2015 to 2016, President of SBEB (2017-2018) and Vice-President of SBEB (2019-2020). He was the head of the undergraduate program in Biomedical Engineering of the Federal University of Uberlândia (2015 - June/2019) and the head of the Centre for Innovation and Technology Assessment in Health (NIATS/UFU) since 2010. He is the head of the Postgraduate Program in Biomedical Engineering (UFU, July/2019 - to date). He was the secretary of the Parkinson's Disease Association of Uberlândia (2018-2019). Dr. Andrade's primary area of research is focused towards getting information from the neuromuscular system to understand its strategies of organization, adaptation and controlling in the context of motor neuron diseases. His research interests include Biomedical Signal Processing and Modelling, Assistive Technology, Rehabilitation Engineering, Neuroengineering and Parkinson's Disease.",institutionString:null,institution:{name:"Federal University of Uberlândia",institutionURL:null,country:{name:"Brazil"}}},editorTwo:null,editorThree:null},{id:"9",title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering",coverUrl:"https://cdn.intechopen.com/series_topics/covers/9.jpg",isOpenForSubmission:!0,editor:{id:"126286",title:"Dr.",name:"Luis",middleName:"Jesús",surname:"Villarreal-Gómez",slug:"luis-villarreal-gomez",fullName:"Luis Villarreal-Gómez",profilePictureURL:"https://mts.intechopen.com/storage/users/126286/images/system/126286.jpg",biography:"Dr. Luis Villarreal is a research professor from the Facultad de Ciencias de la Ingeniería y Tecnología, Universidad Autónoma de Baja California, Tijuana, Baja California, México. Dr. Villarreal is the editor in chief and founder of the Revista de Ciencias Tecnológicas (RECIT) (https://recit.uabc.mx/) and is a member of several editorial and reviewer boards for numerous international journals. He has published more than thirty international papers and reviewed more than ninety-two manuscripts. His research interests include biomaterials, nanomaterials, bioengineering, biosensors, drug delivery systems, and tissue engineering.",institutionString:null,institution:{name:"Autonomous University of Baja California",institutionURL:null,country:{name:"Mexico"}}},editorTwo:null,editorThree:null}]},overviewPageOFChapters:{paginationCount:18,paginationItems:[{id:"81778",title:"Influence of Mechanical Properties of Biomaterials on the Reconstruction of Biomedical Parts via Additive Manufacturing Techniques: An Overview",doi:"10.5772/intechopen.104465",signatures:"Babatunde Olamide Omiyale, Akeem Abiodun Rasheed, Robinson Omoboyode Akinnusi and Temitope Olumide Olugbade",slug:"influence-of-mechanical-properties-of-biomaterials-on-the-reconstruction-of-biomedical-parts-via-add",totalDownloads:2,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering - Annual Volume 2022",coverURL:"https://cdn.intechopen.com/books/images_new/11405.jpg",subseries:{id:"9",title:"Biotechnology - Biosensors, Biomaterials and Tissue Engineering"}}},{id:"81751",title:"NanoBioSensors: From Electrochemical Sensors Improvement to Theranostic Applications",doi:"10.5772/intechopen.102552",signatures:"Anielle C.A. Silva, Eliete A. Alvin, Lais S. de Jesus, Caio C.L. de França, Marílya P.G. da Silva, Samaysa L. Lins, Diógenes Meneses, Marcela R. Lemes, Rhanoica O. Guerra, Marcos V. da Silva, Carlo J.F. de Oliveira, Virmondes Rodrigues Junior, Renata M. Etchebehere, Fabiane C. de Abreu, Bruno G. Lucca, Sanívia A.L. Pereira, Rodrigo C. Rosa and Noelio O. Dantas",slug:"nanobiosensors-from-electrochemical-sensors-improvement-to-theranostic-applications",totalDownloads:4,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Biosignal Processing",coverURL:"https://cdn.intechopen.com/books/images_new/11153.jpg",subseries:{id:"7",title:"Bioinformatics and Medical Informatics"}}},{id:"81766",title:"Evolution of Organoids in Oncology",doi:"10.5772/intechopen.104251",signatures:"Allen Thayakumar Basanthakumar, Janitha Chandrasekhar Darlybai and Jyothsna Ganesh",slug:"evolution-of-organoids-in-oncology",totalDownloads:8,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Organoids",coverURL:"https://cdn.intechopen.com/books/images_new/11430.jpg",subseries:null}},{id:"81678",title:"Developmental Studies on Practical Enzymatic Phosphate Ion Biosensors and Microbial BOD Biosensors, and New Insights into the Future Perspectives of These Biosensor Fields",doi:"10.5772/intechopen.104377",signatures:"Hideaki Nakamura",slug:"developmental-studies-on-practical-enzymatic-phosphate-ion-biosensors-and-microbial-bod-biosensors-a",totalDownloads:4,totalCrossrefCites:0,totalDimensionsCites:0,authors:[{name:"Hideaki",surname:"Nakamura"}],book:{title:"Biosignal Processing",coverURL:"https://cdn.intechopen.com/books/images_new/11153.jpg",subseries:{id:"7",title:"Bioinformatics and Medical Informatics"}}}]},overviewPagePublishedBooks:{paginationCount:12,paginationItems:[{type:"book",id:"6692",title:"Medical and Biological Image Analysis",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/6692.jpg",slug:"medical-and-biological-image-analysis",publishedDate:"July 4th 2018",editedByType:"Edited by",bookSignature:"Robert Koprowski",hash:"e75f234a0fc1988d9816a94e4c724deb",volumeInSeries:1,fullTitle:"Medical and Biological Image Analysis",editors:[{id:"50150",title:"Prof.",name:"Robert",middleName:null,surname:"Koprowski",slug:"robert-koprowski",fullName:"Robert Koprowski",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYTYNQA4/Profile_Picture_1630478535317",biography:"Robert Koprowski, MD (1997), PhD (2003), Habilitation (2015), is an employee of the University of Silesia, Poland, Institute of Computer Science, Department of Biomedical Computer Systems. For 20 years, he has studied the analysis and processing of biomedical images, emphasizing the full automation of measurement for a large inter-individual variability of patients. Dr. Koprowski has authored more than a hundred research papers with dozens in impact factor (IF) journals and has authored or co-authored six books. Additionally, he is the author of several national and international patents in the field of biomedical devices and imaging. Since 2011, he has been a reviewer of grants and projects (including EU projects) in biomedical engineering.",institutionString:null,institution:{name:"University of Silesia",institutionURL:null,country:{name:"Poland"}}}]},{type:"book",id:"7218",title:"OCT",subtitle:"Applications in Ophthalmology",coverURL:"https://cdn.intechopen.com/books/images_new/7218.jpg",slug:"oct-applications-in-ophthalmology",publishedDate:"September 19th 2018",editedByType:"Edited by",bookSignature:"Michele Lanza",hash:"e3a3430cdfd6999caccac933e4613885",volumeInSeries:2,fullTitle:"OCT - Applications in Ophthalmology",editors:[{id:"240088",title:"Prof.",name:"Michele",middleName:null,surname:"Lanza",slug:"michele-lanza",fullName:"Michele Lanza",profilePictureURL:"https://mts.intechopen.com/storage/users/240088/images/system/240088.png",biography:"Michele Lanza is Associate Professor of Ophthalmology at Università della Campania, Luigi Vanvitelli, Napoli, Italy. His fields of interest are anterior segment disease, keratoconus, glaucoma, corneal dystrophies, and cataracts. His research topics include\nintraocular lens power calculation, eye modification induced by refractive surgery, glaucoma progression, and validation of new diagnostic devices in ophthalmology. \nHe has published more than 100 papers in international and Italian scientific journals, more than 60 in journals with impact factors, and chapters in international and Italian books. He has also edited two international books and authored more than 150 communications or posters for the most important international and Italian ophthalmology conferences.",institutionString:'University of Campania "Luigi Vanvitelli"',institution:{name:'University of Campania "Luigi Vanvitelli"',institutionURL:null,country:{name:"Italy"}}}]},{type:"book",id:"7560",title:"Non-Invasive Diagnostic Methods",subtitle:"Image Processing",coverURL:"https://cdn.intechopen.com/books/images_new/7560.jpg",slug:"non-invasive-diagnostic-methods-image-processing",publishedDate:"December 19th 2018",editedByType:"Edited by",bookSignature:"Mariusz Marzec and Robert Koprowski",hash:"d92fd8cf5a90a47f2b8a310837a5600e",volumeInSeries:3,fullTitle:"Non-Invasive Diagnostic Methods - Image Processing",editors:[{id:"253468",title:"Dr.",name:"Mariusz",middleName:null,surname:"Marzec",slug:"mariusz-marzec",fullName:"Mariusz Marzec",profilePictureURL:"https://mts.intechopen.com/storage/users/253468/images/system/253468.png",biography:"An assistant professor at Department of Biomedical Computer Systems, at Institute of Computer Science, Silesian University in Katowice. Scientific interests: computer analysis and processing of images, biomedical images, databases and programming languages. He is an author and co-author of scientific publications covering analysis and processing of biomedical images and development of database systems.",institutionString:"University of Silesia",institution:null}]},{type:"book",id:"6843",title:"Biomechanics",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/6843.jpg",slug:"biomechanics",publishedDate:"January 30th 2019",editedByType:"Edited by",bookSignature:"Hadi Mohammadi",hash:"85132976010be1d7f3dbd88662b785e5",volumeInSeries:4,fullTitle:"Biomechanics",editors:[{id:"212432",title:"Prof.",name:"Hadi",middleName:null,surname:"Mohammadi",slug:"hadi-mohammadi",fullName:"Hadi Mohammadi",profilePictureURL:"https://mts.intechopen.com/storage/users/212432/images/system/212432.jpeg",biography:"Dr. Hadi Mohammadi is a biomedical engineer with hands-on experience in the design and development of many engineering structures and medical devices through various projects that he has been involved in over the past twenty years. Dr. Mohammadi received his BSc. and MSc. degrees in Mechanical Engineering from Sharif University of Technology, Tehran, Iran, and his PhD. degree in Biomedical Engineering (biomaterials) from the University of Western Ontario. He was a postdoctoral trainee for almost four years at University of Calgary and Harvard Medical School. He is an industry innovator having created the technology to produce lifelike synthetic platforms that can be used for the simulation of almost all cardiovascular reconstructive surgeries. He’s been heavily involved in the design and development of cardiovascular devices and technology for the past 10 years. He is currently an Assistant Professor with the University of British Colombia, Canada.",institutionString:"University of British Columbia",institution:{name:"University of British Columbia",institutionURL:null,country:{name:"Canada"}}}]}]},openForSubmissionBooks:{paginationCount:2,paginationItems:[{id:"11579",title:"Animal Welfare - New Insights",coverURL:"https://cdn.intechopen.com/books/images_new/11579.jpg",hash:"12e4f41264cbe99028655e5463fa941a",secondStepPassed:!1,currentStepOfPublishingProcess:2,submissionDeadline:"June 1st 2022",isOpenForSubmission:!0,editors:[{id:"51520",title:"Dr.",name:"Shao-Wen",surname:"Hung",slug:"shao-wen-hung",fullName:"Shao-Wen Hung"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{id:"11578",title:"Antibiotics and Probiotics in Animal Food - Impact and Regulation",coverURL:"https://cdn.intechopen.com/books/images_new/11578.jpg",hash:"3731c009f474c6ed4293f348ca7b27ac",secondStepPassed:!1,currentStepOfPublishingProcess:2,submissionDeadline:"June 3rd 2022",isOpenForSubmission:!0,editors:[{id:"225390",title:"Dr.",name:"Asghar Ali",surname:"Kamboh",slug:"asghar-ali-kamboh",fullName:"Asghar Ali Kamboh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},onlineFirstChapters:{paginationCount:52,paginationItems:[{id:"80761",title:"Extractions Methods and Biological Applications of Essential Oils",doi:"10.5772/intechopen.102955",signatures:"Sonu Kumar Mahawer, Himani, Sushila Arya, Ravendra Kumar and Om Prakash",slug:"extractions-methods-and-biological-applications-of-essential-oils",totalDownloads:1,totalCrossrefCites:null,totalDimensionsCites:0,authors:null,book:{title:"Essential Oils - Advances in Extractions and Biological Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11332.jpg",subseries:{id:"15",title:"Chemical Biology"}}},{id:"81545",title:"Physiochemical Properties of Essential Oils and Applications",doi:"10.5772/intechopen.104112",signatures:"Sunil Kumar Yadav",slug:"physiochemical-properties-of-essential-oils-and-applications",totalDownloads:1,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Essential Oils - Advances in Extractions and Biological Applications",coverURL:"https://cdn.intechopen.com/books/images_new/11332.jpg",subseries:{id:"15",title:"Chemical Biology"}}},{id:"81927",title:"Purinergic System in Immune Response",doi:"10.5772/intechopen.104485",signatures:"Yerly Magnolia Useche Salvador",slug:"purinergic-system-in-immune-response",totalDownloads:5,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Purinergic System",coverURL:"https://cdn.intechopen.com/books/images_new/10801.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"80495",title:"Iron in Cell Metabolism and Disease",doi:"10.5772/intechopen.101908",signatures:"Eeka Prabhakar",slug:"iron-in-cell-metabolism-and-disease",totalDownloads:9,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Iron Metabolism - Iron a Double‐Edged Sword",coverURL:"https://cdn.intechopen.com/books/images_new/10842.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"81799",title:"Cross Talk of Purinergic and Immune Signaling: Implication in Inflammatory and Pathogenic Diseases",doi:"10.5772/intechopen.104978",signatures:"Richa Rai",slug:"cross-talk-of-purinergic-and-immune-signaling-implication-in-inflammatory-and-pathogenic-diseases",totalDownloads:12,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Purinergic System",coverURL:"https://cdn.intechopen.com/books/images_new/10801.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"81764",title:"Involvement of the Purinergic System in Cell Death in Models of Retinopathies",doi:"10.5772/intechopen.103935",signatures:"Douglas Penaforte Cruz, Marinna Garcia Repossi and Lucianne Fragel Madeira",slug:"involvement-of-the-purinergic-system-in-cell-death-in-models-of-retinopathies",totalDownloads:5,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Purinergic System",coverURL:"https://cdn.intechopen.com/books/images_new/10801.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"81756",title:"Alteration of Cytokines Level and Oxidative Stress Parameters in COVID-19",doi:"10.5772/intechopen.104950",signatures:"Marija Petrusevska, Emilija Atanasovska, Dragica Zendelovska, Aleksandar Eftimov and Katerina Spasovska",slug:"alteration-of-cytokines-level-and-oxidative-stress-parameters-in-covid-19",totalDownloads:11,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Chemokines Updates",coverURL:"https://cdn.intechopen.com/books/images_new/11672.jpg",subseries:{id:"18",title:"Proteomics"}}},{id:"81681",title:"Immunomodulatory Effects of a M2-Conditioned Medium (PRS® CK STORM): Theory on the Possible Complex Mechanism of Action through Anti-Inflammatory Modulation of the TLR System and the Purinergic System",doi:"10.5772/intechopen.104486",signatures:"Juan Pedro Lapuente",slug:"immunomodulatory-effects-of-a-m2-conditioned-medium-prs-ck-storm-theory-on-the-possible-complex-mech",totalDownloads:5,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Purinergic System",coverURL:"https://cdn.intechopen.com/books/images_new/10801.jpg",subseries:{id:"17",title:"Metabolism"}}},{id:"81647",title:"Diabetes and Epigenetics",doi:"10.5772/intechopen.104653",signatures:"Rasha A. Alhazzaa, Thomas Heinbockel and Antonei B. Csoka",slug:"diabetes-and-epigenetics",totalDownloads:12,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Epigenetics to Optogenetics - A New Paradigm in the Study of Biology",coverURL:"https://cdn.intechopen.com/books/images_new/9672.jpg",subseries:{id:"14",title:"Cell and Molecular Biology"}}},{id:"81580",title:"Graft-Versus-Host Disease: Pathogenesis and Treatment",doi:"10.5772/intechopen.104450",signatures:"Shin Mukai",slug:"graft-versus-host-disease-pathogenesis-and-treatment",totalDownloads:16,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Purinergic System",coverURL:"https://cdn.intechopen.com/books/images_new/10801.jpg",subseries:{id:"17",title:"Metabolism"}}}]},subseriesFiltersForOFChapters:[{caption:"Proteomics",value:18,count:3,group:"subseries"},{caption:"Metabolism",value:17,count:10,group:"subseries"},{caption:"Cell and Molecular Biology",value:14,count:17,group:"subseries"},{caption:"Chemical Biology",value:15,count:21,group:"subseries"}],publishedBooks:{paginationCount:1,paginationItems:[{type:"book",id:"11392",title:"Leadership in a Changing World",subtitle:"A Multidimensional Perspective",coverURL:"https://cdn.intechopen.com/books/images_new/11392.jpg",slug:"leadership-in-a-changing-world-a-multidimensional-perspective",publishedDate:"May 11th 2022",editedByType:"Edited by",bookSignature:"Muhammad Mohiuddin, Bilal Khalid, Md. Samim Al Azad and Slimane Ed-dafali",hash:"86a6d33cf601587e591064ce92effc02",volumeInSeries:1,fullTitle:"Leadership in a Changing World - A Multidimensional Perspective",editors:[{id:"418514",title:"Dr.",name:"Muhammad",middleName:null,surname:"Mohiuddin",slug:"muhammad-mohiuddin",fullName:"Muhammad Mohiuddin",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000038UqSfQAK/Profile_Picture_2022-05-13T10:39:03.jpg",institutionString:"Université Laval",institution:{name:"Université Laval",institutionURL:null,country:{name:"Canada"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},subseriesFiltersForPublishedBooks:[{group:"subseries",caption:"Business and Management",value:86,count:1}],publicationYearFilters:[{group:"publicationYear",caption:"2022",value:2022,count:1}],authors:{paginationCount:0,paginationItems:[]}},subseries:{item:{id:"18",type:"subseries",title:"Proteomics",keywords:"Mono- and Two-Dimensional Gel Electrophoresis (1-and 2-DE), Liquid Chromatography (LC), Mass Spectrometry/Tandem Mass Spectrometry (MS; MS/MS), Proteins",scope:"With the recognition that the human genome cannot provide answers to the etiology of a disorder, changes in the proteins expressed by a genome became a focus in research. Thus proteomics, an area of research that detects all protein forms expressed in an organism, including splice isoforms and post-translational modifications, is more suitable than genomics for a comprehensive understanding of the biochemical processes that govern life. The most common proteomics applications are currently in the clinical field for the identification, in a variety of biological matrices, of biomarkers for diagnosis and therapeutic intervention of disorders. From the comparison of proteomic profiles of control and disease or different physiological states, which may emerge, changes in protein expression can provide new insights into the roles played by some proteins in human pathologies. Understanding how proteins function and interact with each other is another goal of proteomics that makes this approach even more intriguing. Specialized technology and expertise are required to assess the proteome of any biological sample. Currently, proteomics relies mainly on mass spectrometry (MS) combined with electrophoretic (1 or 2-DE-MS) and/or chromatographic techniques (LC-MS/MS). MS is an excellent tool that has gained popularity in proteomics because of its ability to gather a complex body of information such as cataloging protein expression, identifying protein modification sites, and defining protein interactions. The Proteomics topic aims to attract contributions on all aspects of MS-based proteomics that, by pushing the boundaries of MS capabilities, may address biological problems that have not been resolved yet.",coverUrl:"https://cdn.intechopen.com/series_topics/covers/18.jpg",hasOnlineFirst:!0,hasPublishedBooks:!0,annualVolume:11414,editor:{id:"200689",title:"Prof.",name:"Paolo",middleName:null,surname:"Iadarola",slug:"paolo-iadarola",fullName:"Paolo Iadarola",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSCl8QAG/Profile_Picture_1623568118342",biography:"Paolo Iadarola graduated with a degree in Chemistry from the University of Pavia (Italy) in July 1972. He then worked as an Assistant Professor at the Faculty of Science of the same University until 1984. In 1985, Prof. Iadarola became Associate Professor at the Department of Biology and Biotechnologies of the University of Pavia and retired in October 2017. Since then, he has been working as an Adjunct Professor in the same Department at the University of Pavia. His research activity during the first years was primarily focused on the purification and structural characterization of enzymes from animal and plant sources. During this period, Prof. Iadarola familiarized himself with the conventional techniques used in column chromatography, spectrophotometry, manual Edman degradation, and electrophoresis). Since 1995, he has been working on: i) the determination in biological fluids (serum, urine, bronchoalveolar lavage, sputum) of proteolytic activities involved in the degradation processes of connective tissue matrix, and ii) on the identification of biological markers of lung diseases. In this context, he has developed and validated new methodologies (e.g., Capillary Electrophoresis coupled to Laser-Induced Fluorescence, CE-LIF) whose application enabled him to determine both the amounts of biochemical markers (Desmosines) in urine/serum of patients affected by Chronic Obstructive Pulmonary Disease (COPD) and the activity of proteolytic enzymes (Human Neutrophil Elastase, Cathepsin G, Pseudomonas aeruginosa elastase) in sputa of these patients. More recently, Prof. Iadarola was involved in developing techniques such as two-dimensional electrophoresis coupled to liquid chromatography/mass spectrometry (2DE-LC/MS) for the proteomic analysis of biological fluids aimed at the identification of potential biomarkers of different lung diseases. He is the author of about 150 publications (According to Scopus: H-Index: 23; Total citations: 1568- According to WOS: H-Index: 20; Total Citations: 1296) of peer-reviewed international journals. He is a Consultant Reviewer for several journals, including the Journal of Chromatography A, Journal of Chromatography B, Plos ONE, Proteomes, International Journal of Molecular Science, Biotech, Electrophoresis, and others. He is also Associate Editor of Biotech.",institutionString:null,institution:{name:"University of Pavia",institutionURL:null,country:{name:"Italy"}}},editorTwo:{id:"201414",title:"Dr.",name:"Simona",middleName:null,surname:"Viglio",slug:"simona-viglio",fullName:"Simona Viglio",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRKDHQA4/Profile_Picture_1630402531487",biography:"Simona Viglio is an Associate Professor of Biochemistry at the Department of Molecular Medicine at the University of Pavia. She has been working since 1995 on the determination of proteolytic enzymes involved in the degradation process of connective tissue matrix and on the identification of biological markers of lung diseases. She gained considerable experience in developing and validating new methodologies whose applications allowed her to determine both the amount of biomarkers (Desmosine and Isodesmosine) in the urine of patients affected by COPD, and the activity of proteolytic enzymes (HNE, Cathepsin G, Pseudomonas aeruginosa elastase) in the sputa of these patients. Simona Viglio was also involved in research dealing with the supplementation of amino acids in patients with brain injury and chronic heart failure. She is presently engaged in the development of 2-DE and LC-MS techniques for the study of proteomics in biological fluids. The aim of this research is the identification of potential biomarkers of lung diseases. She is an author of about 90 publications (According to Scopus: H-Index: 23; According to WOS: H-Index: 20) on peer-reviewed journals, a member of the “Società Italiana di Biochimica e Biologia Molecolare,“ and a Consultant Reviewer for International Journal of Molecular Science, Journal of Chromatography A, COPD, Plos ONE and Nutritional Neuroscience.",institutionString:null,institution:{name:"University of Pavia",institutionURL:null,country:{name:"Italy"}}},editorThree:null,series:{id:"11",title:"Biochemistry",doi:"10.5772/intechopen.72877",issn:"2632-0983"},editorialBoard:[{id:"72288",title:"Dr.",name:"Arli Aditya",middleName:null,surname:"Parikesit",slug:"arli-aditya-parikesit",fullName:"Arli Aditya Parikesit",profilePictureURL:"https://mts.intechopen.com/storage/users/72288/images/system/72288.jpg",institutionString:null,institution:{name:"Indonesia International Institute for Life Sciences",institutionURL:null,country:{name:"Indonesia"}}},{id:"40928",title:"Dr.",name:"Cesar",middleName:null,surname:"Lopez-Camarillo",slug:"cesar-lopez-camarillo",fullName:"Cesar Lopez-Camarillo",profilePictureURL:"https://mts.intechopen.com/storage/users/40928/images/3884_n.png",institutionString:null,institution:{name:"Universidad Autónoma de la Ciudad de México",institutionURL:null,country:{name:"Mexico"}}},{id:"81926",title:"Dr.",name:"Shymaa",middleName:null,surname:"Enany",slug:"shymaa-enany",fullName:"Shymaa Enany",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRqB9QAK/Profile_Picture_1626163237970",institutionString:null,institution:{name:"Suez Canal University",institutionURL:null,country:{name:"Egypt"}}}]},onlineFirstChapters:{paginationCount:1,paginationItems:[{id:"81321",title:"Velocity Planning via Model-Based Reinforcement Learning: Demonstrating Results on PILCO for One-Dimensional Linear Motion with Bounded Acceleration",doi:"10.5772/intechopen.103690",signatures:"Hsuan-Cheng Liao, Han-Jung Chou and Jing-Sin Liu",slug:"velocity-planning-via-model-based-reinforcement-learning-demonstrating-results-on-pilco-for-one-dime",totalDownloads:2,totalCrossrefCites:0,totalDimensionsCites:0,authors:null,book:{title:"Applied Intelligence - Annual Volume 2022",coverURL:"https://cdn.intechopen.com/books/images_new/11418.jpg",subseries:{id:"22",title:"Applied Intelligence"}}}]},publishedBooks:{paginationCount:6,paginationItems:[{type:"book",id:"9008",title:"Vitamin K",subtitle:"Recent Topics on the Biology and Chemistry",coverURL:"https://cdn.intechopen.com/books/images_new/9008.jpg",slug:"vitamin-k-recent-topics-on-the-biology-and-chemistry",publishedDate:"March 23rd 2022",editedByType:"Edited by",bookSignature:"Hiroyuki Kagechika and Hitoshi Shirakawa",hash:"8b43add5389ba85743e0a9491e4b9943",volumeInSeries:27,fullTitle:"Vitamin K - Recent Topics on the Biology and Chemistry",editors:[{id:"180528",title:"Dr.",name:"Hiroyuki",middleName:null,surname:"Kagechika",slug:"hiroyuki-kagechika",fullName:"Hiroyuki Kagechika",profilePictureURL:"https://mts.intechopen.com/storage/users/180528/images/system/180528.jpg",institutionString:"Tokyo Medical and Dental University",institution:{name:"Tokyo Medical and Dental University",institutionURL:null,country:{name:"Japan"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"9759",title:"Vitamin E in Health and Disease",subtitle:"Interactions, Diseases and Health Aspects",coverURL:"https://cdn.intechopen.com/books/images_new/9759.jpg",slug:"vitamin-e-in-health-and-disease-interactions-diseases-and-health-aspects",publishedDate:"October 6th 2021",editedByType:"Edited by",bookSignature:"Pınar Erkekoglu and Júlia Scherer Santos",hash:"6c3ddcc13626110de289b57f2516ac8f",volumeInSeries:22,fullTitle:"Vitamin E in Health and Disease - Interactions, Diseases and Health Aspects",editors:[{id:"109978",title:"Prof.",name:"Pınar",middleName:null,surname:"Erkekoğlu",slug:"pinar-erkekoglu",fullName:"Pınar Erkekoğlu",profilePictureURL:"https://mts.intechopen.com/storage/users/109978/images/system/109978.jpg",institutionString:"Hacettepe University",institution:{name:"Hacettepe University",institutionURL:null,country:{name:"Turkey"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7004",title:"Metabolomics",subtitle:"New Insights into Biology and Medicine",coverURL:"https://cdn.intechopen.com/books/images_new/7004.jpg",slug:"metabolomics-new-insights-into-biology-and-medicine",publishedDate:"July 1st 2020",editedByType:"Edited by",bookSignature:"Wael N. Hozzein",hash:"35a30d8241442b716a4aab830b6de28f",volumeInSeries:16,fullTitle:"Metabolomics - New Insights into Biology and Medicine",editors:[{id:"189233",title:"Prof.",name:"Wael N.",middleName:"Nabil",surname:"Hozzein",slug:"wael-n.-hozzein",fullName:"Wael N. Hozzein",profilePictureURL:"https://mts.intechopen.com/storage/users/189233/images/system/189233.jpeg",institutionString:"Beni-Suef University",institution:{name:"Beni-Suef University",institutionURL:null,country:{name:"Egypt"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"6967",title:"Prebiotics and Probiotics",subtitle:"Potential Benefits in Nutrition and Health",coverURL:"https://cdn.intechopen.com/books/images_new/6967.jpg",slug:"prebiotics-and-probiotics-potential-benefits-in-nutrition-and-health",publishedDate:"March 4th 2020",editedByType:"Edited by",bookSignature:"Elena Franco-Robles and Joel Ramírez-Emiliano",hash:"11781d6b1c070edcf204518e632033be",volumeInSeries:8,fullTitle:"Prebiotics and Probiotics - Potential Benefits in Nutrition and Health",editors:[{id:"219102",title:"Dr.",name:"Elena",middleName:null,surname:"Franco-Robles",slug:"elena-franco-robles",fullName:"Elena Franco-Robles",profilePictureURL:"https://mts.intechopen.com/storage/users/219102/images/system/219102.jpg",institutionString:"Universidad de Guanajuato",institution:{name:"Universidad de Guanajuato",institutionURL:null,country:{name:"Mexico"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"8292",title:"Oral Health by Using Probiotic Products",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/8292.jpg",slug:"oral-health-by-using-probiotic-products",publishedDate:"December 11th 2019",editedByType:"Edited by",bookSignature:"Razzagh Mahmoudi",hash:"327e750e83634800ace02fe62607c21e",volumeInSeries:5,fullTitle:"Oral Health by Using Probiotic Products",editors:[{id:"245925",title:"Dr.",name:"Razzagh",middleName:null,surname:"Mahmoudi",slug:"razzagh-mahmoudi",fullName:"Razzagh Mahmoudi",profilePictureURL:"https://mts.intechopen.com/storage/users/245925/images/system/245925.jpg",institutionString:"Qazvin University of Medical Sciences",institution:null}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null},{type:"book",id:"7978",title:"Vitamin A",subtitle:null,coverURL:"https://cdn.intechopen.com/books/images_new/7978.jpg",slug:"vitamin-a",publishedDate:"May 15th 2019",editedByType:"Edited by",bookSignature:"Leila Queiroz Zepka, Veridiana Vera de Rosso and Eduardo Jacob-Lopes",hash:"dad04a658ab9e3d851d23705980a688b",volumeInSeries:3,fullTitle:"Vitamin A",editors:[{id:"261969",title:"Dr.",name:"Leila",middleName:null,surname:"Queiroz Zepka",slug:"leila-queiroz-zepka",fullName:"Leila Queiroz Zepka",profilePictureURL:"https://mts.intechopen.com/storage/users/261969/images/system/261969.png",institutionString:"Universidade Federal de Santa Maria",institution:{name:"Universidade Federal de Santa Maria",institutionURL:null,country:{name:"Brazil"}}}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null}]},testimonialsList:[{id:"27",text:"The opportunity to work with a prestigious publisher allows for the possibility to collaborate with more research groups interested in animal nutrition, leading to the development of new feeding strategies and food valuation while being more sustainable with the environment, allowing more readers to learn about the subject.",author:{id:"175967",name:"Manuel",surname:"Gonzalez Ronquillo",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/175967/images/system/175967.png",slug:"manuel-gonzalez-ronquillo",institution:{id:"6221",name:"Universidad Autónoma del Estado de México",country:{id:null,name:"Mexico"}}}},{id:"18",text:"It was great publishing with IntechOpen, the process was straightforward and I had support all along.",author:{id:"71579",name:"Berend",surname:"Olivier",institutionString:"Utrecht University",profilePictureURL:"https://mts.intechopen.com/storage/users/71579/images/system/71579.png",slug:"berend-olivier",institution:{id:"253",name:"Utrecht University",country:{id:null,name:"Netherlands"}}}},{id:"8",text:"I work with IntechOpen for a number of reasons: their professionalism, their mission in support of Open Access publishing, and the quality of their peer-reviewed publications, but also because they believe in equality.",author:{id:"202192",name:"Catrin",surname:"Rutland",institutionString:null,profilePictureURL:"https://mts.intechopen.com/storage/users/202192/images/system/202192.png",slug:"catrin-rutland",institution:{id:"134",name:"University of Nottingham",country:{id:null,name:"United Kingdom"}}}}]},submityourwork:{pteSeriesList:[{id:"14",title:"Artificial Intelligence",numberOfPublishedBooks:9,numberOfPublishedChapters:87,numberOfOpenTopics:6,numberOfUpcomingTopics:0,issn:"2633-1403",doi:"10.5772/intechopen.79920",isOpenForSubmission:!0},{id:"7",title:"Biomedical Engineering",numberOfPublishedBooks:12,numberOfPublishedChapters:99,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2631-5343",doi:"10.5772/intechopen.71985",isOpenForSubmission:!0}],lsSeriesList:[{id:"11",title:"Biochemistry",numberOfPublishedBooks:27,numberOfPublishedChapters:290,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2632-0983",doi:"10.5772/intechopen.72877",isOpenForSubmission:!0},{id:"25",title:"Environmental Sciences",numberOfPublishedBooks:1,numberOfPublishedChapters:9,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2754-6713",doi:"10.5772/intechopen.100362",isOpenForSubmission:!0},{id:"10",title:"Physiology",numberOfPublishedBooks:11,numberOfPublishedChapters:139,numberOfOpenTopics:4,numberOfUpcomingTopics:0,issn:"2631-8261",doi:"10.5772/intechopen.72796",isOpenForSubmission:!0}],hsSeriesList:[{id:"3",title:"Dentistry",numberOfPublishedBooks:8,numberOfPublishedChapters:129,numberOfOpenTopics:0,numberOfUpcomingTopics:2,issn:"2631-6218",doi:"10.5772/intechopen.71199",isOpenForSubmission:!1},{id:"6",title:"Infectious Diseases",numberOfPublishedBooks:13,numberOfPublishedChapters:108,numberOfOpenTopics:3,numberOfUpcomingTopics:1,issn:"2631-6188",doi:"10.5772/intechopen.71852",isOpenForSubmission:!0},{id:"13",title:"Veterinary Medicine and Science",numberOfPublishedBooks:11,numberOfPublishedChapters:104,numberOfOpenTopics:3,numberOfUpcomingTopics:0,issn:"2632-0517",doi:"10.5772/intechopen.73681",isOpenForSubmission:!0}],sshSeriesList:[{id:"22",title:"Business, Management and Economics",numberOfPublishedBooks:1,numberOfPublishedChapters:12,numberOfOpenTopics:2,numberOfUpcomingTopics:1,issn:"2753-894X",doi:"10.5772/intechopen.100359",isOpenForSubmission:!0},{id:"23",title:"Education and Human Development",numberOfPublishedBooks:0,numberOfPublishedChapters:0,numberOfOpenTopics:2,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100360",isOpenForSubmission:!1},{id:"24",title:"Sustainable Development",numberOfPublishedBooks:0,numberOfPublishedChapters:12,numberOfOpenTopics:5,numberOfUpcomingTopics:0,issn:null,doi:"10.5772/intechopen.100361",isOpenForSubmission:!0}],subseriesList:[],annualVolumeBook:{},thematicCollection:[],selectedSeries:null,selectedSubseries:null},seriesLanding:{item:{id:"11",title:"Biochemistry",doi:"10.5772/intechopen.72877",issn:"2632-0983",scope:"Biochemistry, the study of chemical transformations occurring within living organisms, impacts all areas of life sciences, from molecular crystallography and genetics to ecology, medicine, and population biology. Biochemistry examines macromolecules - proteins, nucleic acids, carbohydrates, and lipids – and their building blocks, structures, functions, and interactions. Much of biochemistry is devoted to enzymes, proteins that catalyze chemical reactions, enzyme structures, mechanisms of action and their roles within cells. Biochemistry also studies small signaling molecules, coenzymes, inhibitors, vitamins, and hormones, which play roles in life processes. Biochemical experimentation, besides coopting classical chemistry methods, e.g., chromatography, adopted new techniques, e.g., X-ray diffraction, electron microscopy, NMR, radioisotopes, and developed sophisticated microbial genetic tools, e.g., auxotroph mutants and their revertants, fermentation, etc. More recently, biochemistry embraced the ‘big data’ omics systems. Initial biochemical studies have been exclusively analytic: dissecting, purifying, and examining individual components of a biological system; in the apt words of Efraim Racker (1913 –1991), “Don’t waste clean thinking on dirty enzymes.” Today, however, biochemistry is becoming more agglomerative and comprehensive, setting out to integrate and describe entirely particular biological systems. The ‘big data’ metabolomics can define the complement of small molecules, e.g., in a soil or biofilm sample; proteomics can distinguish all the comprising proteins, e.g., serum; metagenomics can identify all the genes in a complex environment, e.g., the bovine rumen. This Biochemistry Series will address the current research on biomolecules and the emerging trends with great promise.",coverUrl:"https://cdn.intechopen.com/series/covers/11.jpg",latestPublicationDate:"May 26th, 2022",hasOnlineFirst:!0,numberOfOpenTopics:4,numberOfPublishedChapters:289,numberOfPublishedBooks:27,editor:{id:"31610",title:"Dr.",name:"Miroslav",middleName:null,surname:"Blumenberg",fullName:"Miroslav Blumenberg",profilePictureURL:"https://mts.intechopen.com/storage/users/31610/images/system/31610.jpg",biography:"Miroslav Blumenberg, Ph.D., was born in Subotica and received his BSc in Belgrade, Yugoslavia. He completed his Ph.D. at MIT in Organic Chemistry; he followed up his Ph.D. with two postdoctoral study periods at Stanford University. Since 1983, he has been a faculty member of the RO Perelman Department of Dermatology, NYU School of Medicine, where he is codirector of a training grant in cutaneous biology. Dr. Blumenberg’s research is focused on the epidermis, expression of keratin genes, transcription profiling, keratinocyte differentiation, inflammatory diseases and cancers, and most recently the effects of the microbiome on the skin. He has published more than 100 peer-reviewed research articles and graduated numerous Ph.D. and postdoctoral students.",institutionString:null,institution:{name:"New York University Langone Medical Center",institutionURL:null,country:{name:"United States of America"}}},subseries:[{id:"14",title:"Cell and Molecular Biology",keywords:"Omics (Transcriptomics; Proteomics; Metabolomics), Molecular Biology, Cell Biology, Signal Transduction and Regulation, Cell Growth and Differentiation, Apoptosis, Necroptosis, Ferroptosis, Autophagy, Cell Cycle, Macromolecules and Complexes, Gene Expression",scope:"The Cell and Molecular Biology topic within the IntechOpen Biochemistry Series aims to rapidly publish contributions on all aspects of cell and molecular biology, including aspects related to biochemical and genetic research (not only in humans but all living beings). We encourage the submission of manuscripts that provide novel and mechanistic insights that report significant advances in the fields. Topics include, but are not limited to: Advanced techniques of cellular and molecular biology (Molecular methodologies, imaging techniques, and bioinformatics); Biological activities at the molecular level; Biological processes of cell functions, cell division, senescence, maintenance, and cell death; Biomolecules interactions; Cancer; Cell biology; Chemical biology; Computational biology; Cytochemistry; Developmental biology; Disease mechanisms and therapeutics; DNA, and RNA metabolism; Gene functions, genetics, and genomics; Genetics; Immunology; Medical microbiology; Molecular biology; Molecular genetics; Molecular processes of cell and organelle dynamics; Neuroscience; Protein biosynthesis, degradation, and functions; Regulation of molecular interactions in a cell; Signalling networks and system biology; Structural biology; Virology and microbiology.",annualVolume:11410,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/14.jpg",editor:{id:"165627",title:"Dr.",name:"Rosa María",middleName:null,surname:"Martínez-Espinosa",fullName:"Rosa María Martínez-Espinosa",profilePictureURL:"https://mts.intechopen.com/storage/users/165627/images/system/165627.jpeg",institutionString:null,institution:{name:"University of Alicante",institutionURL:null,country:{name:"Spain"}}},editorTwo:null,editorThree:null,editorialBoard:[{id:"79367",title:"Dr.",name:"Ana Isabel",middleName:null,surname:"Flores",fullName:"Ana Isabel Flores",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRpIOQA0/Profile_Picture_1632418099564",institutionString:null,institution:{name:"Hospital Universitario 12 De Octubre",institutionURL:null,country:{name:"Spain"}}},{id:"328234",title:"Ph.D.",name:"Christian",middleName:null,surname:"Palavecino",fullName:"Christian Palavecino",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y000030DhEhQAK/Profile_Picture_1628835318625",institutionString:null,institution:{name:"Central University of Chile",institutionURL:null,country:{name:"Chile"}}},{id:"186585",title:"Dr.",name:"Francisco Javier",middleName:null,surname:"Martin-Romero",fullName:"Francisco Javier Martin-Romero",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSB3HQAW/Profile_Picture_1631258137641",institutionString:null,institution:{name:"University of Extremadura",institutionURL:null,country:{name:"Spain"}}}]},{id:"15",title:"Chemical Biology",keywords:"Phenolic Compounds, Essential Oils, Modification of Biomolecules, Glycobiology, Combinatorial Chemistry, Therapeutic peptides, Enzyme Inhibitors",scope:"Chemical biology spans the fields of chemistry and biology involving the application of biological and chemical molecules and techniques. In recent years, the application of chemistry to biological molecules has gained significant interest in medicinal and pharmacological studies. This topic will be devoted to understanding the interplay between biomolecules and chemical compounds, their structure and function, and their potential applications in related fields. Being a part of the biochemistry discipline, the ideas and concepts that have emerged from Chemical Biology have affected other related areas. This topic will closely deal with all emerging trends in this discipline.",annualVolume:11411,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/15.jpg",editor:{id:"441442",title:"Dr.",name:"Şükrü",middleName:null,surname:"Beydemir",fullName:"Şükrü Beydemir",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0033Y00003GsUoIQAV/Profile_Picture_1634557147521",institutionString:null,institution:{name:"Anadolu University",institutionURL:null,country:{name:"Turkey"}}},editorTwo:{id:"13652",title:"Prof.",name:"Deniz",middleName:null,surname:"Ekinci",fullName:"Deniz Ekinci",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002aYLT1QAO/Profile_Picture_1634557223079",institutionString:null,institution:{name:"Ondokuz Mayıs University",institutionURL:null,country:{name:"Turkey"}}},editorThree:null,editorialBoard:[{id:"241413",title:"Dr.",name:"Azhar",middleName:null,surname:"Rasul",fullName:"Azhar Rasul",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRT1oQAG/Profile_Picture_1635251978933",institutionString:null,institution:{name:"Government College University, Faisalabad",institutionURL:null,country:{name:"Pakistan"}}},{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",fullName:"Sergey Sedykh",profilePictureURL:"https://mts.intechopen.com/storage/users/178316/images/system/178316.jfif",institutionString:null,institution:{name:"Novosibirsk State University",institutionURL:null,country:{name:"Russia"}}}]},{id:"17",title:"Metabolism",keywords:"Biomolecules Metabolism, Energy Metabolism, Metabolic Pathways, Key Metabolic Enzymes, Metabolic Adaptation",scope:"Metabolism is frequently defined in biochemistry textbooks as the overall process that allows living systems to acquire and use the free energy they need for their vital functions or the chemical processes that occur within a living organism to maintain life. Behind these definitions are hidden all the aspects of normal and pathological functioning of all processes that the topic ‘Metabolism’ will cover within the Biochemistry Series. Thus all studies on metabolism will be considered for publication.",annualVolume:11413,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/17.jpg",editor:{id:"138626",title:"Dr.",name:"Yannis",middleName:null,surname:"Karamanos",fullName:"Yannis Karamanos",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002g6Jv2QAE/Profile_Picture_1629356660984",institutionString:null,institution:{name:"Artois University",institutionURL:null,country:{name:"France"}}},editorTwo:null,editorThree:null,editorialBoard:[{id:"243049",title:"Dr.",name:"Anca",middleName:null,surname:"Pantea Stoian",fullName:"Anca Pantea Stoian",profilePictureURL:"https://mts.intechopen.com/storage/users/243049/images/system/243049.jpg",institutionString:null,institution:{name:"Carol Davila University of Medicine and Pharmacy",institutionURL:null,country:{name:"Romania"}}},{id:"203824",title:"Dr.",name:"Attilio",middleName:null,surname:"Rigotti",fullName:"Attilio Rigotti",profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",institutionString:null,institution:{name:"Pontifical Catholic University of Chile",institutionURL:null,country:{name:"Chile"}}},{id:"300470",title:"Dr.",name:"Yanfei (Jacob)",middleName:null,surname:"Qi",fullName:"Yanfei (Jacob) Qi",profilePictureURL:"https://mts.intechopen.com/storage/users/300470/images/system/300470.jpg",institutionString:null,institution:{name:"Centenary Institute of Cancer Medicine and Cell Biology",institutionURL:null,country:{name:"Australia"}}}]},{id:"18",title:"Proteomics",keywords:"Mono- and Two-Dimensional Gel Electrophoresis (1-and 2-DE), Liquid Chromatography (LC), Mass Spectrometry/Tandem Mass Spectrometry (MS; MS/MS), Proteins",scope:"With the recognition that the human genome cannot provide answers to the etiology of a disorder, changes in the proteins expressed by a genome became a focus in research. Thus proteomics, an area of research that detects all protein forms expressed in an organism, including splice isoforms and post-translational modifications, is more suitable than genomics for a comprehensive understanding of the biochemical processes that govern life. The most common proteomics applications are currently in the clinical field for the identification, in a variety of biological matrices, of biomarkers for diagnosis and therapeutic intervention of disorders. From the comparison of proteomic profiles of control and disease or different physiological states, which may emerge, changes in protein expression can provide new insights into the roles played by some proteins in human pathologies. Understanding how proteins function and interact with each other is another goal of proteomics that makes this approach even more intriguing. Specialized technology and expertise are required to assess the proteome of any biological sample. Currently, proteomics relies mainly on mass spectrometry (MS) combined with electrophoretic (1 or 2-DE-MS) and/or chromatographic techniques (LC-MS/MS). MS is an excellent tool that has gained popularity in proteomics because of its ability to gather a complex body of information such as cataloging protein expression, identifying protein modification sites, and defining protein interactions. The Proteomics topic aims to attract contributions on all aspects of MS-based proteomics that, by pushing the boundaries of MS capabilities, may address biological problems that have not been resolved yet.",annualVolume:11414,isOpenForSubmission:!0,coverUrl:"https://cdn.intechopen.com/series_topics/covers/18.jpg",editor:{id:"200689",title:"Prof.",name:"Paolo",middleName:null,surname:"Iadarola",fullName:"Paolo Iadarola",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bSCl8QAG/Profile_Picture_1623568118342",institutionString:null,institution:{name:"University of Pavia",institutionURL:null,country:{name:"Italy"}}},editorTwo:{id:"201414",title:"Dr.",name:"Simona",middleName:null,surname:"Viglio",fullName:"Simona Viglio",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRKDHQA4/Profile_Picture_1630402531487",institutionString:null,institution:{name:"University of Pavia",institutionURL:null,country:{name:"Italy"}}},editorThree:null,editorialBoard:[{id:"72288",title:"Dr.",name:"Arli Aditya",middleName:null,surname:"Parikesit",fullName:"Arli Aditya Parikesit",profilePictureURL:"https://mts.intechopen.com/storage/users/72288/images/system/72288.jpg",institutionString:null,institution:{name:"Indonesia International Institute for Life Sciences",institutionURL:null,country:{name:"Indonesia"}}},{id:"40928",title:"Dr.",name:"Cesar",middleName:null,surname:"Lopez-Camarillo",fullName:"Cesar Lopez-Camarillo",profilePictureURL:"https://mts.intechopen.com/storage/users/40928/images/3884_n.png",institutionString:null,institution:{name:"Universidad Autónoma de la Ciudad de México",institutionURL:null,country:{name:"Mexico"}}},{id:"81926",title:"Dr.",name:"Shymaa",middleName:null,surname:"Enany",fullName:"Shymaa Enany",profilePictureURL:"https://s3.us-east-1.amazonaws.com/intech-files/0030O00002bRqB9QAK/Profile_Picture_1626163237970",institutionString:null,institution:{name:"Suez Canal University",institutionURL:null,country:{name:"Egypt"}}}]}]}},libraryRecommendation:{success:null,errors:{},institutions:[]},route:{name:"profile.detail",path:"/profiles/153536",hash:"",query:{},params:{id:"153536"},fullPath:"/profiles/153536",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()