Open access

Sintering Characteristics of Injection Moulded 316L Component Using Palm-Based Biopolymer Binder

Written By

Mohd Afian Omar and Istikamah Subuki

Submitted: 13 April 2011 Published: 23 March 2012

DOI: 10.5772/32737

From the Edited Volume

Sintering - Methods and Products

Edited by Volodymyr Shatokha

Chapter metrics overview

3,240 Chapter Downloads

View Full Metrics

Written By

Mohd Afian Omar and Istikamah Subuki

Submitted: 13 April 2011 Published: 23 March 2012