Plant transformation is a technique that allows us to transfer genes from one species to another in order to introduce new characteristics into the recipient. The plant transformation technique has become widely adopted as a method both to understand plant physiology and to improve plant characteristics. There are now many established gene-transfer methods, both direct and indirect, for the stable introduction of novel genes into plant species. Examples include
This method was successfully used for transformation of tobacco BY-2 protoplasts with a ten-fold higher transformation efficiency than the conventional PEG transformation method that is using naked plasmid DNA (Sone et al., 2002). The BABs transformation method has a wide applicability beyond tobacco BY-2 protoplasts to many organisms, both in plant cells, e.g., eggplant (
Mizukami and associates (2003) have introduced yeast artificial chromosomes (YACs) into yeast spheroplasts using this method, and revealed the higher physical stability of 468 kb of YAC DNA embedded in and/or on the bioactive beads in solution compared to naked chromosome DNA molecules. The authors also checked whether YAC DNA molecules immobilized on bioactive beads would be intact even after vortex treatment. The result showed that naked YAC DNA molecules was degraded in the solution, resulting in no visible band after electrophoresis, but the band was clearly observed in the case of the YAC DNA molecules immobilized on the beads. This shows that BABs can stabilize large DNA fragments in solution. Moreover, yeast chromosomal DNA with YAC DNAs (128 kb, 256 kb and 468 kb) was embedded in and/or on the beads and transferred into recipient yeast cells lacking those YAC DNAs. Pulse field gel electrophoresis clearly showed that YAC DNAs up to 468 kb in size were successfully introduced into recipient cells by PEG treatment with bioactive beads. This utility, coupled with the fact that the method does not require any sophisticated equipment and is easy to practice, clearly suggests the bioactive beads method as an alternative transformation method, especially for large DNA molecules.
Despite the advantages of BAB transformation mentioned above, there is insufficient information regarding the ideal production conditions, such as the shape and size of BABs, or the concentration of DNA that is suitable for the most efficient BABs transformation. Thus, the production conditions for BABs should be optimized. Here, improvement of the BAB production system enabling uniform size and shape will be reported. Using this system, various sizes of beads immobilizing the pUC18-sGFP construct could be produced. Its applicability to plant transformation has already been examined by using tobacco BY-2 protoplasts.
As described above, the BAB method has the ability to transfer large DNA fragments into yeast spheroplasts and into the protoplasts derived from tobacco BY-2 cells suspension. Moreover, recently our group has successfully produced transgenic rice with large DNA inserts containing
2. Improvement of efficacy of a BAB transformation method
The capturing of DNA fragments by BABs can prevent their physical damage during transformation processes. As a result, the BAB transformation method provides a feasible large DNA fragment transfer method into many organisms (Mizukami et al., 2003; Wada et al., 2009). However, the mechanism for DNA transfer is still obscure and experimental conditions are not yet optimized, resulting in low DNA transfer efficiency (Liu et al., 2004). During preparation of BABs by the original sonication method, CaCl2-containing DNA molecules were added into an alginate emulsion solution, and the beads were then collected by centrifugation and used for transformation (Sone et al. 2002). It was, however, found that large amounts of DNA remained in the CaCl2 solution, resulting in a poor efficiency, both in DNA immobilization and transformation. Therefore, a more efficient BAB production system with higher DNA immobilization and DNA transformation efficiencies is desired.
A new system for bead production was developed using an in-house device called a bead-maker. The bead-maker has 2 major components; an automated micro-syringe, and a vibrator (Fig. 3). The automated micro-syringe was assembled by placing a syringe (100 μl gastight syringe, Hamilton, Nevada, USA) on a micro-syringe pump (MSP-RT, AS ONE) so that the flow rate of the solution could be accurately controlled. The vibrator consists of a loudspeaker (FR-8, 4Ω, Visaton, Germany), attached to a moveable rod fixed to a wooden board and connected to a sine wave sound generator (AG-203D Kenwood, Tokyo, Japan). A capillary tube (30 μm ø, GL Sciences, Tokyo, Japan) from the syringe was connected to the moveable rod so it could be vibrated simultaneously when the rod was vibrated. The frequency and amplitude of the sine wave sound generator are selectable. As a result, the vibration of the moveable rod as well as the capillary tube linking the micro-syringe and the vibrator are controllable.
To test the effectiveness of this new system for plasmid DNA immobilization, bead production using 1% alginate containing 0.5 μg/μl of pUC18-sGFP was carried out. First, a DNA-containing alginate solution was prepared by mixing 100 μl of sodium alginate solution (1% w/v) with 100 μl of pUC18-sGFP (0.5 μg/μl), and then the freshly-prepared solution was slowly loaded into the micro-syringe. The syringe was connected to the capillary tube and placed on the micro-syringe pump. The solidifying solution was then prepared by firstly adding 750 μl of a mixture of 0.1 M CaCl2 and isopropyl alcohol (1:1) in a 1.5 ml micro-centrifuge tube, followed by adding 750 μl of isoamyl alcohol and placing the tube in a plastic rack as shown in Fig. 3. As the bead-maker was working, the DNA-containing alginate solution was pumped out at a steady flow rate. Simultaneously, the sine wave sound generator produced sound waves at the speaker resulting in the vibration of the moveable rod connecting to the speaker. Consequently, vibration of the capillary tube linked to the moveable rod dropped alginate-DNA solution into the solidifying solution. The isoamyl alcohol kept the droplets spherical and the mixture of CaCl2 and the isopropyl alcohol solidified the alginate-DNA droplets. The spherical beads were collected and washed at least twice in 0.1 M CaCl2 solution by centrifugation (5000
We further investigated whether the bead size influenced transformation efficiency. As described above, solution flow rate and the frequency and amplitude of the sine wave were adjustable. Various combinations of these parameters were tested to obtain uniformly sized BABs. Investigation of the effect of solution flow rate, vibration frequency, and vibration amplitude on the size of beads indicated that a solution flow rate at 0.4 μl/min was the most suitable for producing beads of a uniform size, compared to other flow rates tested at 0.2, 0.8, 2 and 5 μl/min. However, the bead size was controllable by changing the vibration frequency and amplitude. The vibration amplitude had a direct effect on bead sizes: smaller beads are produced with a higher amplitude. The frequency of the sine wave affected the bead size through the strength of the capillary tube vibration; frequencies causing strong vibration produced smaller beads while weak vibration produces larger beads.
Three different sizes of BABs immobilizing the same amounts of pUC18-sGFP were selected (Fig. 5) and used for transformation into tobacco BY-2 protoplasts in combination with PEG treatment (Fig. 6). Transient assays of GFP-expressing protoplasts were carried out 24 h and 48 h after transformation (Fig. 6c). The results showed a negative correlation between bead size and transformation efficiency, that is, as the size of beads decreased, the transformation efficiency increased. Moreover, with the new system, a
3. Large DNA transfer into plants using the bioactive beads method
3.1. Transformation of rice with large DNA molecules using BAB method
Transformation of large DNA fragments is a promising approach to extend the reach of plant genetic engineering. Until now, plant genetic engineering has been performed using single or small numbers of genes, resulting in successful production of genetically engineered plants such as herbicide- and insect-resistant plants (Gonsalves, 1998; Khan et al., 2009; Song et al., 2003b; Tai et al., 1999; Wang et al., 2005). To produce transgenic plants with more variety of phenotypes, however, multiple gene transfer will be required (Dafny-Yellin et al., 2007; Daniell et al., 2002; Halpin, 2005; Naqvi et al., 2010). Even single traits are often the result of expression of multiple genes. For example, a single metabolic pathway may be related to several genes. Thus if we want to manipulate the metabolic pathway, it will be best achieved by manipulating several genes simultaneously. Introducing these genes at same time is preferable because: (1) introduction of multiple genes through crossing of different transgenic plants is time-consuming and laborious, and (2) co-transformation of different kinds of plasmid DNAs needs preparation of many constructs, which also takes time and needs different kinds of marker genes depending on the number of plasmids to be introduced. Therefore, transformation with large DNAs including multiple genes is promising to enhance the efficiency of transformation. In addition, large DNA transfer will enable the regulatory regions of transgenes to be transferred with the genes of interest. This will allow introduced genes to be expressed at the physiological level.
Although this approach is expected to have such advantages, it is still difficult to transfer large DNA fragments into plants. This difficulty is due to the lack of a reliable method of introducing large DNA fragments into plants. For general plant transformation,
To examine the applicability of the BAB method to plant transformation with large DNA fragment, 124 kb of YAC DNA was introduced into cultured tobacco BY-2 cells (Liu et al., 2004b). The transient expression of introduced genes was detected in the transgenic suspension cells. To investigate this in more detail, the bioactive beads method was applied to the transformation of rice with
(With kind permission from Springer Science+Business Media: Plant Cell Reports, Bioactive beads-mediated transformation of rice with large DNA fragments containing
As a result, nine transgenic plants were obtained and analyzed. The PCR analyses showed that each gene was integrated into the rice genome (Table 1). Some transgenic plants contained most transgenes, but transgenic plants with all the transgenes could not be obtained. This indicates that rearrangement of introduced DNA molecules occurred during transformation.
The copy numbers of
To examine if the introduced gene is functional in transgenic rice, a phenotypic analysis was performed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) (Wada et al., 2010). The results indicated that the endosperm structure changed in the transgenic rice to a more loosely packed structure (Fig. 10). The hardness genes are known to affect the softness of wheat endosperms by giving the loosely packed endosperm structure. Thus, the EM observations clearly indicated that the introduced hardness gene functioned in similar manner as in wheat endosperm. Analysis of physico-chemical properties of the rice flour also indicated that the transgenic rice endosperm had the phenotype of soft textured seed. The results suggest that the PINB protein localized at the surface of the starch compounds, resulting in preventing the adhesion of each starch compound and changing some physico-chemical properties, such as flour particle size, and pasting properties. These results indicate that the hardness locus introduced was functional in transgenic rice. This suggests that introduction of a genomic locus that controls a trait could be a good strategy for adding desirable traits to plants.
The results obtained indicated that the BAB method is a promising method for plant transformation with large DNA fragments. Co-transformation experiments with two or three kinds of BAC DNAs simultaneously were also successful (data not shown). Co-transformation can increase the number of genes that can be introduced simultaneously. However, some aspects of the BAB method could be improved. First, the intactness of introduced DNA fragments should be examined. In our experiments, the deletion of some transgenes was observed. The rearrangement of introduced DNA fragments might also occur in other regions that were not checked. How often and to what extent such rearrangements occur with the BAB compared to conventional methods needs to be investigated to fully establish that the BAB method has advantages over other conventional methods for transformation with large DNA fragments. Second, further improvement in the transformation efficiency of the BAB method should be achieved. We have succeeded in immobilizing proteins on BABs (data not shown). The immobilization of large DNAs with proteins, such as VirE2, might target the introduced DNA into the host genome more efficiently because VirE2 is known to target T-DNA into nuclei and protect the T-DNA during
In mammalian cells, chromosome engineering systems including artificial chromosomes, have been developed (Basu & Willard, 2005; Ikeno et al., 1998; Kazuki et al., 2011; Oshimura & Katoh, 2008). An artificial chromosome has a capacity to carry chromosomal fragments, with virtually no size limitation to the transgenes that can be transferred (Kuroiwa et al., 2000). In addition, microcell-mediated transfer (MMCT) has made it possible to introduce genes that cannot be transferred by conventional transfection. For example, a chromosomal region including the dystrophin gene (2.4 Mb) has been introduced into a mouse genome using human artificial chromosomes (HACs) and MMCT (Hoshiya et al., 2009). HACs can be engineered by recombination technology in cells that are the most suitable for each step (e.g. chicken DT40 cells for homologous recombination, hamster CHO cells for site-specific recombination, Kazuki et al. 2010). However, there is no such system for plants. Recently three reports have been published on the production of plant artificial chromosomes (Carlson et al., 2007; Yu et al., 2007; Ananiev et al., 2009). However, there is still no report of utilizing them for plant transformation with large DNA fragments. Thus, a plant transformation system using large DNA fragments has yet to be developed. The BAB method can be used to introduce large DNA fragments into a plant genome as a part of plant transformation system with large DNA fragments.
3.2. Further utility of bioactive beads
BABs can be not only applied to DNA transformation, but also to the immobilization of proteins (Zhou et al., 2009). BSA (Bovine serum albumin) protein was successfully entrapped by BABs and its interaction with FITC-labeled anti BSA was clearly observed. Moreover, the authors improved the efficacy of protein immobilization in BABs by treating the alginate solution with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysulfosuccinimide (NHSS) to cross-link the desired protein (BSA) to the alginate carboxyl groups prior to solidification. It was found that cross-linking beads provided high protein-retention ability for up to 2 weeks after immobilization. Such improved protein-immobilizing beads with high retention capacity might have the potential to be an alternative choice for detecting antigen-antibody interactions.
BABs have also been successfully used in the immobilization of a single yeast cell displaying hydrolyzing enzymes to capture fluorescent molecules released after enzymatic reaction (Zhou et al., 2009). The retention of fluorescent products by yeast-encapsulating BABs enabled active and non-active cells to be differentiated by sorting in a flow cytometer. Using such a developed system, a library screening for novel enzymatic activities on the surface of yeast cells should be possible.
An alternative transformation method, BABs-mediated transformation, has been developed by applying a drug delivery system (DDS) in which highly concentrated DNA molecules are entrapped by small autonomously degradable alginate beads and transferred into plant cells in combination with polyethylene glycol (PEG) treatment. This transformation method is easy to perform, is applicable to a range of organisms, allows large-sized DNAs to be delivered, and facilitates the transportation of multiple genes of up to 468 kb size into yeast spheroplasts. Moreover, our latest results on transformation of BAC DNA containing
This work is supported by a fund from the Handai Frontier Research Center’s Strategic Research Base supported by the Special Coordination Fund for Promoting Science and Technology of the Government of Japan to K. F. This research was partially supported by a Grant-in-Aid for Scientific Research (B) (No. 19380194) from the Ministry of Education, Culture, Sports, Science and Technology of Japan. We would also like to express special thanks to the Global COE (Center of Excellence) Program, “Global Education and Research Center for Bio-Environmental Chemistry”, of Osaka University. N.K. would like to thank the Ministry of Education, Culture, Sports, Science and Technology, Japan (MEXT) and the International Graduate Program for Frontier Biotechnology, Graduate School of Engineering, Osaka University for fellowship support. N.W. was supported by a Research Fellowship from the Japanese Society for the Promotion of Science for Young Scientists