Injection efficiency and rates of lysis in mouse embryos penetrated with capillaries beveled at different angles. With kind permission from Springer Science+Business Media: Biomedical Microdevices, Focus Ion Beam Micromachined Glass Pipettes for Cell Microinjection., Vol. 12, No.2, 2010, pp. (311–316), Campo, E.M., Lopez-Martinez, M. J., Fernández, E., Barrios, L., Ibáñez, E., Nogués, C., Esteve, J., & Plaza, J.A
1. Introduction
Currently, mechanistic and biological phenomena within the cellular level are not well understood (Bao & Suresh, 2003) and the evolution of those during disease or treatment is also unclear. Cells are complex structures with nuclei and organelles, whose dimensions require the development of micro and nanotechnologies for effective manipulation and monitoring. Indeed, sizes of nuclei vary from 3 to 7 µm for differentiated cells. In embryos, nuclei are not surrounded by a membrane although the genetic material is mostly compounded in a 9µm diameter region. Other organelles, with specific functions in eukaryotic cells like mithocondria, can have smaller sizes (1 µm). In addition, histologists know that important parameters such as pH or Ca/Na/K concentration can greatly vary locally within the cytoplasmic region. Recently, Weibel (Weibel et al., 2007) argued the need for microbiology to evolve into a quantitative field. The argument predicted the development of microsystem tools to enable individual cell manipulation, growth, and the study of subcellular organization, while mechanisms of differentiation and communication between cells would be unveiled. Indeed, current research efforts aim at investigating the genetic, biochemical, and behavioural differences among cells. On-going development of microstructures to quantitatively study parameters within single cells will lead to a thorough understanding of subcellular activity, including pathogenesis with an unprecedented level of detail. In addition, these efforts will pave the way for highly-effective, cell-tailored, drug delivery. The problems are of course how to effectively manipulate cells, how to position a sensor at specific locations within the cell, and even how to penetrate the different organelles, as depicted in Figure 1. This chapter will review current concerns on cell manipulation and recent developments in micro and nanofabrication technologies aiming at the increased functionality of cellular tools.
2. Microfabrication technologies for cellular handling
A first step in the study of cells inevitably starts by designing tools and protocols for cell handling, as the manipulation of the uttermost external membranes in life cells are likely to introduce perturbations in the system that could ultimately impact either the sub-cellular or intercellular processes to be elucidated. Pipettes are typically pulled and thinned by pullers, cut to the appropriate inner diameter by microforging techniques, and polished. Human fertility scientists identified earlier (Huang et al., 1996) the difficulties around tool preparation, and the importance of appropriate cell handling during in vitro fertilization (IVF) procedures. Following this line of thought, and in view of the traditional manufacturing approach currently active in the trade, technologists have pondered whether cell handling is hindered by rudimentary-manufactured manipulators (Campo et al., 2009 a and b).
Conventional pipettes consist of borosilicate glass capillaries that are subsequently thinned, cut, and polished to achieve appropriate tip geometries with adequate dimensions. Figure 2 shows commercially available glass capillaries whose difference in geometry has been controlled by a puller with a combination of axial tension and thermal treatment (Sutter Instruments, 2008). In recent years, cell microinjection has become a crucial procedure in cell and reproductive biology. Microinjection of cells is routinely used in various biotechnological and biomedical applications such as reproductive cloning of animals by nuclear transfer (Kishigami et al., 2006), production of transgenic animals by DNA injection into embryos (Ittner and Götz 2007) or in vitro fertilization of oocytes by intracytoplasmic sperm injection (ICSI) (Palermo et al. 1992; Yoshida and Perry 2007). Higher cell survival rates have been reported to result from minimized microinjection damage when high quality pipettes are used. With common-practice microinjection methods, 5-25% of mouse oocytes lyse during ICSI (Lacham-Kaplan & Trounson, 1995) and 20-30% of mouse embryos lyse after pronuclear microinjection of DNA (Nagy et al. 2002). With all, experimental evidence suggests that crucial conventional pipette manufacturing procedures involve tedious artisanal methods that are prone to failure (Yaul et al., 2008; Ostadi et al., 2009).
Despite the absence of a thorough bio-mechanistic explanation to pipette-cell interaction, trial and error-based initiatives have accumulated a wealth of specifications applicable to tools and piercing techniques in different scenarios. Figure 2 shows electron microscopy images of pre-processed pipettes (top) and optical microscopy images of conventionally processed pipettes to different geometries. In particular, for most applications involving oocytes and embryos, injection pipettes must be bevelled and often spiked at the tip (Yaul et al. 2008; Nagy et al. 2002). Bevelled spiked tips (as those shown in Figure 3) favour penetration through a thick zona pellucida and an elastic plasma membrane.
The different geometries achieved by forging and polishing techniques have some versatility to accommodate for different piercing scenarios. Microinjection protocols for sperm injection, particularly those used for injecting mouse oocytes, occasionally need flat-end micropipettes to first “core” through the zona pellucida and then through the oolemma using minute vibrations from a piezo device. Pipettes used with a piezo drill require a clean 90-degree break at the tip (amenable to be produced by a microforge) and a bevel or spike at the tip is not needed to assist perforation. The inner diameter of these pipettes must be carefully controlled for the pipette to be most effective. The pulled pipette is usually cut on a microforge to the appropriate diameter (Sutter Instruments, 2008). Figure 3 shows SEM images of tips from glass pipettes, revealing rough edges in pre-processed pipettes and polished edge in a conventionally-used pipette in human ICSI; where smooth edges and a bevelled tip with a spike assist during perforation.
Indeed, edge finish is an important factor in pipette quality. Abrasion, acid and fire polishing are common techniques to remove morphological irregularities from pipette edges. In a recent study, Yaul and coworkers (Yaul et al., 2008) investigated the impact of different gas chemistries during fire-polishing of IVF pipettes. Typically in IVF industry, glass micro tools are drawn from hollow glass capillaries of 1 mm diameter (Yaul et al., 2008). These thinned capillaries are cut manually to a length of 100 mm from hollow glass rods resulting in sharp and chipped edges, similar to those shown in Figure 3 (left). Resulting sharp and uneven edges are known to easily pick up debris, rendering them ineffective for IVF treatments. Yaul’s experiments involved analysis of fire polishing process using candle, butane, propane, 2350 butane propane, and oxyacetylene gas flames to find the appropriate gas chemistry, the optimum distance of the capillary relative to the flame, and the optimum heating and cooling times as the tip morphology is modified by the glass phase transition. The results show that the temperature range in 2350 butane propane gas (between 925–1,015°C) is optimum for fire polishing of borosilicate glass capillaries, as the softening point of borosilicate glass is 820°C and the working temperature lies between 1,000 to 1,252°C.
The uneven pattern in heat radiance from a non-punctual heating source was also tentatively addressed by exposing capillaries to the top, middle, and bottom section of the flame, as shown in Figure 4. Inspection of edge roughness was conducted by optical microscopy and discussion was only provided in a qualitative manner.
Reportedly, fire-polished capillaries were tested in IVF clinics in the UK, with great acceptance over pipettes with non-fired polished edges. Although fire polishing seems to have an impact on pipette performance, there is still a lack of quantitative measure of both thermal parameters (for automation) and effects of this treatment on edge roughness.
At this time, it is unclear what levels of roughness are acceptable for adequate cell handling. A number of questions arise as the importance of the edge surface to be atomically flat for cell handling or even for organelle perforation. Incidentally, Malboubi and coworkers (Malboubi et al., 2009) unequivocally correlated pipette surface roughness (in the order of nanometers) with giga-seal formation in patch clamping, providing semi-quantitative evidence of improved roughness based on the resolution provided by electron microscopy images. Commonly used characterization techniques to measure roughness in microelectronics, such as atomic force microscopy (AFM) are amenable to be deployed in the context of tools for the biological sciences. This is possibly the most sensible step looking forward in the process to understand edge roughness and its consequences on cellular manipulation.
To this effect, a number of efforts to introduce current microtechnologies into the context of pipette processing (Kometani et al., 2005-2008; Malboubi et al., 2009; Campo et al., 2010 and piercing techniques (Ergenc & Olgac, 2007) have appeared in the literature. In particular, the use of focus ion beams and electron microscopy may have opened a new avenue to the generation of improved or even, altogether new, tools in the biomedical sciences. In the next sub-sections we will review the functionalities of focus ion beams and the incipient efforts to apply those to the life sciences.
2.1. Micro-nano fabrication using focus ion beam technologies
In the last few decades, technological advancements in computing capacity, vacuum pumps, and differential vaccumm columns among others have had a large impact on electron and ion microscopy. Scanning electron microscopes (SEMs) can now operate in dry vacuum or wet mode, possibilitating imaging of hydrated specimens in their native environment. To the myriad of developments, it is worth emphasizing the revolutionary contribution of dual focus ion beam systems (FIBs), where the usual single electron gun in SEM is now complemented with a gallium ion gun. The complementary gun keeps a coincidental point with the electron gun, and their intersecting angle depends on the manufacturer. In addition, the systems are usually complemented with in situ gas sources. The action of a focus beam of gallium ions is schematically depicted in Figures 5 and 6.
Gallium ions are larger and heavier than electrons. When accelarated, they (brown spheres in Figure 5) impinge on a surface and their interaction with the outmost atoms on the substrate will result in atomic ionization and breaking of chemical bonds. As a result, outer atoms in the substrate are sputtered away, as seen in the grey spheres in Figure 5. The availiability of gas injectors in the FIB chamber can actually assist the atom ejection process by first adsorbing, and then chemically etching the targeted surface (blue spheres in Figure 5). The use of gases can acelarate milling in large regions and facilitate etching through deep trenches. In addition, gallium ions are likely to be unintentionally implanted during etching. Unintentional gallium ion implantation could have deleterious effects over the applicability of biomedical tools, as will be discussed later.
The other-less known- functionality adscribed to FIB is the gas-assisted deposition of metals and insulators, as seen in Figure 6. In this scheme, the combined action of gallium ions (brown spheres) and gas molecules (blue and green sphere-coplexes) emerging from the in situ sources, results in the adsorption of gas molecules to the substrate, which leads to a thermally-driven gas molecule disocciation. Finally, the unwanted dissociated species are sputtered. Similarly to milling, implantation of both gallium ions and dissociated species are likely to occur during deposition.
The reader is directed to the monograph on Focus Ion Beams by Lucille Giannuzzi and Fred Stevie (Giannuzzi & Stevie, 2005) for a thorough and rigorous description of the technique.
2.2. FIB micro-nano fabrication for customized pipettes
Fabrication of microinjection pipettes and micromanipulators with finely-controlled piercing angles, nanometer polishing, and versatile tip geometries is the next step to improve cell manipulation efficiency. Microsystem-based technologies hold the promise to mass-manufacture such highly functional tools with highly customized tips. This high customization is likely to have an impact on both current and future cell handling and cell probing. In particular, FIB micromachining has been receiving some attention lately in this application context. Indeed, FIB is rapidly becoming useful in diverse environments, serving multiple applications. Some of which differ greatly from the initial aims of FIB towards, for example, identification of failure mode analysis in the semiconductor industry or the thinning of lamellas (Gianuzzi and Stevie, 2005) for transmission electron microscopy inspection in materials science.
The pervasive nature of FIB capabilities, combined with the increasing cross-talk between the physical and the life sciences have been conducive to the pursuit of FIB as means of pipette customization. Some of the first evidence in this effort came from Kometani and coworkers, who retrofitted conventional glass pipettes (glass capillaries) by building nanostructured nozzles (Kometani et al., 2005a). The process is depicted in Figure 7 (Kometani et al., 2005, where a conventional pipette is subjected to pulling (for thinning purposes), gold coating (to minimize electrical charing during electron and ion beam bomdardment), and FIB customization by chemical vapor deposition (CVD) and further milling.
CVD deposition refers to the gas deposition process described in the previous section.
In this scheme, nozzle structures were first fabricated on silicon substrates (Kometani et al., 2003). Irradiation of selected areas in the surface under a constant
Figure 8 (middle row) shows the progression of nozzle building with final inner and outer channels of 150 nm and 1580 nm at tip and base, respectively. The post-fabrication cross-section images (as seen in the last images in middle and bottom row) suggests even deposition and absence of voids, although the DLC surface has probably been unintentionally polished during FIB cross-sectioning. Further discussion would be needed to clarify the structural quality of as-grown DLC in these architectures.
Similarly, nozzle architectures can be implemented on pipette surfaces (Kometani et al., 2003). Again, by combining etching and deposition FIB capabilities, a final nozzle of 220 nm tip inner diameter can be tightly sculpted on the edges of a commercial glass pipette, as seen in Figure 8 (bottom row). In this process, an initial polishing of the edges takes place to subsequently facilitate a smooth deposition. The function generator designed for sculpting this nozzle tapered a cone-like shell, from 1500 nm to 480 nm outer diameters and from 870 nm to 220 nm inner diameters. A cross-section view of the structure shows the sharp interface between glass and DLC. Although values of interface strength were not reported along with fabrication methodology, this approach could be sound for cellular handling.
We have mentioned earlier how the versatility of FIB milling and deposition is not only due to the high position ability of the ion beam itself, but also to the high programmability of the scanning lenses (magnetic fields). Coupled with design software, sophisticated 3-dimensional patterns can be sculpted at pipette edges, as seen in Figure 9 (Kometani et al., 2005, and 2006). Nanonets could be sculptured at the edges of pipettes (Kometani, 2005 (not shown), offering a singular approach to collecting 2µm polystyrene spheres submerged in an aqueous environment.
The nanonet design serves as a proof of concept conducive to manipulation and analysis of subcellular organelles. Design possibilities go beyond passive components and an electrostatically-active manipulator has also been demonstrated, as shown in Figure 9 (top) by a 4-finger nanomanipulator, clampling 1µm-diameter latex microspheres. The scenario to selectively capture subcellular organelles of a specific size in a cell of choice was explored by constructing a multi-component tool. The multicomponent tool consisted of a cell wall-cutting needle and a nano-net of a pre-defined mesh size (Figure 9 bottom). Chloroplasts in an Egeria densa leaf were selectively captured by size-filtration in a nanonet. Filtration was activated by the naturally-occurring capillary suction at the tip of the pipette (Kometani 2006). Indeed, the filtering tool was manipulated to approach a specific cell (Kometani 2006), and the needle was inserted into the cell wall with the assistance of an external micromanipulator. Filtering of smaller organelles took place, leaving chloroplasts in the cell cutting component, also acting as a surgical scoop. Reportedly, this process was completed in 7 s, and the filtered chloroplasts from the cell of interest are shown in Figure 9 (bottom right).
The wealth of examples provided by Kometani and co-workers has paved the way for a radical approach to pipette design and manufacturing, opening a whole new perspective in procedures for biological handling at the cellular and subcellular level. Following the initial stages of proof of concept, a few questions arise regarding reliability; such as the mechanical properties of the ensemble. As-deposited FIB DLC shows a large Young’s modulus (600 GPa-Kometani 2003 and references therein), yielding a stiffness comparable to other ceramics such as SiC and WC. In addition, the nanomanipulators did survive tests involving microsphere manipulation and chloroplast filtration. However, a more detailed analysis of mechanical durability of these structures in the relevant context applications is necesary.
Albeit, questions regarding toxicity and biocompatibility need urgent attention (Campo et al., 2011). It is worth emphasizing that gallium ions are likely to be implanted during both milling and deposision in FIB. Further studies are needed to address the impact of ion implantated tools on cellular activity. The next section will describe the work by Campo and co-workers who milled conventional glass pipettes at specific angles (Campo et al., 2010 by FIB, yielding extremely polished edges with high precision. Tests during mouse embryo piercing, correlated increased penetration rates with decreased pipette angle. In addition, optimum embryo development after manipulation revealed little impact of residual implanted gallium ions, suggesting biocompatibility. It was also observed that milled pipettes maintain structural integrity after repeated piercing. Micromachining of glass pipettes by FIB could be amenable to mass production, presenting a promising avenue for future, increasingly demanding, cell handling.
2.3. FIB microfabrication for cell handling: Piercing and biocompatibility
Recapitulating, prior sections have described how manufacturing embryo injection pipettes is a delicate task. Typically conducted manually, trial-and-error pulling and heating control the inner and outer diameters as well as the length of the taper (Nagy et al., 2002). In FIB, areas can be milled selectively by gallium ions, as discussed earlier. In this section, we will describe how careful choice of time and current in the ion beam allows for high-quality polishing, providing qualitatively smooth, regular tapers. The high spatial selectivity in FIB has been effectively used to design sharp pipette tips, creating highly customized capillaries (Campo et al., 2010. In this context, customization involved controlled bevelled angles as well as regular taper finishes. In an attempt to address the usability of FIB-customized pipettes in an impactful application context and also to partially address biocompatibility, mouse oocytes and embryos were used in piercing tests. Mouse embryos pose an ideal test bench for initial assessment of biocompatibility since small perturbations at the initial developmental stages are likely to impact embryonic development.
Important technological advances have taken place on oocyte and embryo microinjection recently. Oocyte and embryo microinjection can be performed with flat-ended pipettes which are easier to fabricate but often require piezoelectric-driven drilling to mechanically advance the pipette tip through the zona pellucida and plasma membrane (Yoshida & Perry, 2007). Piezo-driven drilling has been key to the success of experimental procedures involving microinjection of mouse oocytes in processes such as ICSI. The high elasticity of mouse oocyte plasma membrane complicates manual perforation without rupture using conventional bevelled and spiked pipettes, systematically requiring piezo-drilling. Although not strictly necessary, piezo-driven drilling greatly simplifies mouse embryo piercing. In this scheme, a small amount of mercury is typically loaded in the micropipette to minimize lateral vibrations, preventing cell damage (Ediz & Olgac, 2005). However, the additional cost of piezo-drills and, more importantly, toxicity issues arising from the use of mercury, have limited the use of piezo-assisted microinjection to just a few species (Yoshida & Perry, 2007; Ergenc et al., 2008).
Following this line of research and given the increasing need to improve current cell piercing (Ergenc & Olgac, 2007) and pipette quality (Yaul et al. 2008; Ostadi et al. 2009), Campo and coworkers (Campo et al., 2010) have sharpened conventional glass capillaries by FIB and tested them in mouse embryos. For the first time, the effect of sub-nanometer pipette polishing on zona pellucida and plasma membrane piercing is investigated. In addition, in vitro development of injected embryos was monitored, providing an early assessment on damage and toxicity from FIB-processed pipettes. A total of three capillaries were sharpened at 30, 20, and 15° (capillaries number 1,2, and 3, respectively), with profiles shown in Figure 10. The resulting edges were smooth after successive polishing. The insert in Figure 10a (previously shown in Figure 3 right) shows a commercial glass pipette used in human ICSI (Humagen, Virginia) featuring a sharp spike that, according to commercial specifications, has an angle between 25 and 30°. This angle is similar to those of pipettes number 1 and 2. Table 1 lists the different capillaries describing the final angular features.
Capillaries number 1, 2, and 3 were used to pierce zona pellucida and plasma membrane of mouse embryos at the one cell stage (Figure 11). When successful, once inside the perivitelline space, the sharp tip was positioned to deform the plasma membrane and pierce it, penetrating within the cytoplasm. This process was conducted with a micromanipulator; applying pressure manually, in the absence of piezo-drilling.
A total of 20 embryos were used to test the injection efficiency of each pipette and the results are summarized in Table 1. Successful penetration of both the zona pellucida and the plasma membrane was achieved with all pipettes tested, with varying efficiencies and rates of embryo lysis. Pipette number 1 went through the zona pellucida in 60% of the tested embryos, leaving 40% unperforated. Further plasma membrane penetration was achieved with a 45% success rate, applying high pressures that resulted in extensive embryo deformation, possibly promoting lysis. All of the tested embryos were perforated with pipette number 2, totaling 75% penetration rate of both the zona pellucida and the plasma membrane. Pipette number 2 failed to perforate the plasma membrane in only 25% of the tested embryos. Finally, zona pellucida and plasma membrane penetration was achieved in 100% of the embryos punctured with pipette number 3.
Pipette number | Beveled angle [º] of micropipette | Number of embryos used | Penetration of ZP and PM (%)* | Penetration of ZP only (%)** | Lysis (%)b |
1 | 30 | 20 | 9 (45)a | 3 (15)a | 3 (33.3)a |
2 | 20 | 20 | 15 (75)a | 5 (25)a | 7 (46.7)a |
3 | 15 | 20 | 20 (100)b | - | 6 (30)a |
Lysis was observed only in embryos in which both the zona pellucida and the plasma membrane penetration was successful. Rates of embryo lysis were 33%, 46.7%, and 30% for capillaries number 1, 2, and 3, respectively. Pipettes were structurally sound, as no chips or fractures developed after piercing multiple embryos. Embryos that survived micromanipulation with pipette number 3 (n=14) were kept in culture for 96 h, and their development was assessed every 24 h, as seen in Table 2. These will be referred to as micromanipulated embryos throughout this discussion. An additional collection of embryos that were cultured in parallel with the micromanipulated embryos but without going through micromanipulation was used for comparison. We will refer to these as control embryos (n=23). In vitro embryo development results are summarized in Table 2. Control and micromanipulated embryos cleaved at similar rates (86.9% and 92.8%, respectively) and developed to the blastocyst stage (see Figure 12) also at similar rates (82.6% and 78.6%, respectively).
Group of embryos | Embryos (%) developed to | ||||
Number of embryos | 2-cell | 4-cell | Monula | Blastocyst | |
Micromanipulated | 14 | 13 (92.8) | 13 (92.8) | 13 (92.8) | 11(78.6) |
Control | 23 | 20 (86.9) | 20 (86.9) | 20 (86.9) | 19 (82.6) |
Summarizing, only pipette number 3 could penetrate the zona pellucida and the plasma membrane with 100% success and avoid lysis with 70% success. Piercing with pipettes 1 and 2 resulted in a more difficult plasma membrane penetration, as summarized in Table 1. Penetration rates increase with a decreased pipette angle. However, some lysis was unavoidable for all three pipettes. The correlation between sharpness and lysis is unclear, as sharper tips do not appear to minimize damage during piercing or decrease lysis. The finish in the pipette surely has an impact both in the piercing effect and in embryo development. Indeed, roughness and chipped edges in pipette tips are thought to be responsible for introducing contaminants into the oocyte, therefore inhibiting fertilization (Yaul et al., 2008). Some additional work has also been done assessing the effect of FIB- taper finish on penetration and damage (Campo et al., 2009, although only in a qualitative fashion. These results show that capillary number 3 with 15°-sharp, smooth, finished tips by FIB could penetrate the zona pellucida and the plasma membrane efficiently, in good agreement with classic piezo-assisted drilling (Nagy et al., 2002).
Survival rates during the in-vitro development of embryos previously manipulated with pipette number 3 were similar to survival rates of control, non-manipulated embryos (Table 2). All 14 embryos pierced with pipette number 3 were monitored for in-vitro development, noting the survival rates at the two-cell, four-cell, morula, and blastocyst stages. Most micromanipulated embryos successfully developed to the two- and four-cell stages as well as at morula. The survival rate at all these stages was constant at 93%. Similarly, control embryos maintained a constant 87% survival rate at the same intervals. Only one of the 14 micromanipulated embryos remained arrested at the one-cell stage. This phenomenon was also observed in control embryos, suggesting that causes inhibiting division might be unrelated to micromanipulation factors.
Gallium ions (unintentionally implanted during pipette milling) did not appear to affect development of mouse embryos to the blastocyst stage. While more detailed analyses are needed to fully address biocompatibility, these preliminary results are encouraging and could ultimately lead to improved piercing and survival rates during cell handling.
3. Sub-cellular monitoring, drug-delivery and manipulation
The prior section reviewed recent developments in technologies aiming at improving the funtionalities of celllular tools (mostly manipulators and injectors) and addressing the quality of finishes in injection pipettes. In the spirit of completeness, in this section we will describe in a cursory manner, some of the current landscape for subcellular technology.
3.1. Monitoring and drug-delivery by sub-cellular smart particles
The idea of targeting specific areas within the cell for detailed study is not new. Dyed biocompatible polymeric nanoparticles have been used for apoptosis imaging (Kim et al., 2006), and morphology of intracellular polymeric systems have been studied to address bio-compatibility along with their suitability as imaging markers and as drug delivery carriers (Nishiyama, 2007). Carrier morphology studies suggest that particles of specific sizes are required to prevent deleterious interaction with cell organelles. On those lines, vehicle morphology studies concluded that phagocitic cells responded differently to micelles (assemblies of hydrophobic/hydrophilic block-copolymers) of different sizes (Geng et al., 2007). Walter et al. examined polymeric spheres that were phagocited for drug delivery (Walter et al., 2001) and Akin et al. (Akin et al., 2007) used microbots (nanoparticles attached to bacteria) to deliver therapeutic cargo to specific sites within a cell. Microbots delivered nanoparticles of polystyrene carrying therapeutic cargo and DNA into cells by taking advantage of invasive properties of bacteria. Recently, Kataoka’s group (Mirakami et al., 2011) has sucessfully delivered chemotherapeutic drugs to the nuclear area of cancerous cells using micelles carriers. The specific delivery to the nuclear region is believed to have played a role in inhibiting the development of drug-resistance tumors.
Within the subcellular domain, different approaches have aimed at manufacturing devices to interact with organelles. Some groups have contemplated the possibility of constructing micro total analysis stystems (µTAS) suitable for biological applications (Voldman et al., 1999), where the mechanisms to extract information out of the cellular entity are challenging. However, few attempts have been made to address viability and functionality of standard microtechnology processed systems. Recently, our group has reported silicon microparticles embedded in live cells, suggesting an outstanding compatibility between conventional microtechnology devices and live systems down to the cellular level (Fernandez-Rosas et al., 2009; Gomez-Martinez et al., 2010). In terms of sensing, initial functionality mechanisms have identified apoptosis. These revolutionary findings constitute a paramount paradigm shift on cellular metrology, histology, and drug delivery; which are likely to have a profound impact in future research lines.
3.2. Manipulation by biomimetics
Another approach to sub-cellular exploration is inspired by nature. Indeed, understanding, mimicking, and adapting cellular and molecular mechanisms of biological motors in vitro has been forecast to produce a revolution in molecular manufacturing (Dinu et al., 2007, and Iyer et al., 2004). Biomolecular motors are biological machines that convert several forms of energy into mechanical energy. During a special session at Nanotech 2004 in Boston, MA, DARPA commissioned-overview by Iyer argued that functions carried out within a cell by biomolecular motors could be similar to man-made motors (i.e. load carrying or rotational movement). Researchers have already pondered about ways to transport designated cargo, such as vesicles, RNA or viruses to predetermined locations within the cell (Hess et al., 2008). Professor Hess during his keynote lecture at SPIE Photonics West (January 2008) also proposed biomolecular motors as imaging and sensing devices. Biomolecular motors such as the motor protein kinesin have been suggested as efficient tractor trailers within the cell. Efficiency of these systems could generate useful tools (conveyor belts and forklifts) as nanoscale bio-manufacturing tools. Kinesin moves along a track and is responsible for transporting cellular cargo such as organelles and signaling molecules. However, a detailed explanation of this walking mechanism is still missing (Iyer et al., 2004), currently inhibiting spatial and temporal control of kinesin molecular motors.
3.3. Monitoring and manipulation by FIB and microfluidics
Trends to intracellular manipulation also revolve around scaling down conventional pipettes. This trend is facilitated by microfluidics. Microsystem technologies have produced in the last decade an array of microfluidic devices (Verpoorte & De Rooig, 2003) that could potentially probe the subcellular domain. By combining our prior experience learned in FIB glass pipettes (Campo et al. 2010 with microfluidics (Lopez-Martinez et al. 2008 and 2009), micropipettes have been milled and tested in live embrios (Campo et al., 2009. In this approach, micropipettes dimensions are comparable to some organelles and the sharp tips are likely to induce less damage on external cell walls. Details on the bottom-up microfabrication squeme can be found elsewhere (Lopez-Martinez et al., 2009). Similar experiments to those with glass pipettes (described in Section 2.3) revealed that silicon oxide (SiO2) FIB-sharp nozzles successfully pierced mouse oocytes and embryos, without prejudice to the embryo and without producing structural damage to the nozzle.
Lack of structural damage is an important concern in FIB-modified structures as puncture devices reside on mechanical strength. Ideally, micronozzles will be sturdy enough to perforate zona pellucida and membrane without curving the tip of the micropipette or causing any other structural damage such as cracking or fragmentation. The tested micropipettes mantained their structural alumina layer, which provided sturdier structures. Figure 13 shows the structural layer (darker filler) surrounded by the silicon oxide channel. The tips did not show signs of mecanical failure during puncturing, as seen in Figure 14, or after repeated puncturing. Success from this initial assessment on mechanical strength and sucessful piercing has led to further work on hollow, fully microfluidic-functional micropipettes (
Scaling down further to nanofluidics has also been achieved by ingenious building of carbon nanopipettes on conventional glass pipettes (Schrlau et al., 2008). Compared to conventional glass pipettes, these structures have suggested enhanced performance for intracellular delivery and cell physiology due to their smaller size, breakage and clogging resistance. Carbon nanopippettes have been reportedly used for concurrent injection and electrophysiology.
3.4. Smart materials in the sub-cellular domain
Materials science also has an important role in the development of cellular tools. Indeed, development of biocompatible smart materials with novel functionalities could provide the needed non-incremental advancement for sub-cellular monitoring and manipulation. Historically, there is a large presence of polymers in biomedicine. In fact, liquid crystal elastomers have been proposed as artificial muscles under the heating action of infrared lasers (Shenoy et al., 2002 and Ikeda et al., 2007), and an early proof-of-concept observed liquid crystal elastomers “swimming away” from the actuating light (Camacho-Lopez et al., 2004). This rudimentary motor was submerged in water and the source was an Ar+ ion laser (514 nm). Despite their potentially large application space, photoactuating materials have not been used in the broader context of biological systems (Campo et al., 2010, posing an unique research opportunity for innovative functionalities.
4. Conclusions and future directions
An engineering analysis of the currently restrictive designs, finishes, and probing methods of glass pipettes and micromanipulators, suggests that those suffer from limited functionality and often damage cells; ultimately resulting in lysis. With all, the physical parameters that identify a high-quality pipette for a specific application need of a more quantitative description. In particular, the finishes of a pipette seem to be lacking a quantitative measure that could be provided by commonly-used characterization techniques in microsystem technologies, such as atomic force microscopy.
There seems to be plenty of leeway in advancing the state of the art in pipette design, manufacturing and piercing techniques. The great flexibility posed by microsystem technologies in the context of microfluidic devices and micromanufacturing with ion beams, present an unique opportunity in the biomedical sciences. In this scheme, tools for cell handling and monitoring can be tailored to specific tasks with unprecedented level of detail. Indeed, the possibility of affordable custom-made tools opens the door to improved sucess rates in common cellular procedures such as cell piercing. Highly-customized tools can also be designed to accomplish subcellular manipulation that would be, otherwise, unattainable with the limitted functionalities of conventional pipettes. The use of ion beams for surface finishes can possibly alivieate some of the tedious work often involved in finishing capilaries. Ion beam polishing could also contribute to the characterization of roughness and finishes in a quantitative manner. In fact, ion beam milling is a useful tool to reverse engineer the morphology of pipettes altogether by sequential polishing and further image reconstruction (Ostadi et al., 2009). These tomographic capabilities could prove useful in quality control assessment of current and upcomming cellular tools.
Kometani et al. have provided a wealth of examples in highly customized micromanipulators, pending application in relevant cellular and subcellular scenarios. Future experiments should aim at inseminating mouse oocytes with FIB-polished glass pipettes, as initial tests by Campo et al. merely addressed piercing feasibility, i.e. mechanical sturdiness, sharpness, and early indication of biocompatibility. However, the real application scenario has not yet been demonstrated since no injection tests have been performed to show functionality. Similarly, FIB-sharpened microfluidic-pipettes are pending injection testing. In addition, microfulidic-pipettes manufacturing is ameanable to exploring materials other than silicon oxide, that could be of interest to complementary applications such as electrophysiology. Similarly to glass pipettes, microfluidic pipettes could be fitted with additional components, either by bottom-up or top-down microtechnologies. Resulting structures from the addition of sensors and actuators with different functionalities need to be tested in adequate scnearios and further assess biocompatibility.
We have discussed in detail how FIB with the assistance of gallium ions and carbon deposition, has gone well beyond proof of concept in terms of innovative design and micromanufacturing. Future directions in the microtechnology applications to the life sciences are likely to build upon FIB capabilities and also explore upcomming ion-bem microscopies. Looking forward, building upon FIB capabilities could be explored in the materials space, as well as in the functionality space of ion beam-produced tools. On the materials front, most FIB manufacturing for cellular tools has exploited the structural robustness of DLC. However, a number of chemistries are available in commercial FIB, with increasingly purified sources (Botman et al., 2009). Deposition of gold (Au), paladium (Pd), and platinum (Pt) could be specially interesting for devices requiring electrical conduction, such as those used in electrophysiology. Tipically, higher purity nanostructures are deposited by ion beam than by electron beam-assited deposition (Utke, 2008). However, further work will need to assess the effects of source purity on chemistry and mechanical characteristics of ion beam-deposited structures.
Amongst emergent novel micromachining and micromanufacturing technologies ameanable to contributing to cellular tools, Helium Ion Microscopy (HIM) is possibly the most relevant. Seminal papers describe this novel microscopy that serves both as a characterization (Scipioni et al., 2009) and a manufacturing tool (Postek et al., 2007, Maas et al., 2010) in micro-nano systems. With the use of hellium (He) ions and, smilarly to FIB, highly customizable milling capabilities, HIM could have a possitive impact on the pending biocompatibility assessment. Adequate biocompatibility studies are needed to assess ion dose implantation on tools and devices and the effects at the subcellular and cellular levels, as well as in vivo. These will be critical parameters that could hinder the implementation of ion-beam technologies in the life sciences. In all likelihood, these strategies will need to be developed by multidisciplinary teams. In fact, assembly of highly multidisciplinary teams, encompassing bio-medical scientists and microsytem technologists, are surely needed to fully explore the possibilities of impactful task–specific tools in the context of subcellular manipulation.
It is also crucial to develop a mechanistic understanding of how design, manufacturing, and piercing techniques affect cellular structures. Indeed, the impact of pipette parameters on handling is unclear, as mechanisms responsible for different failure modes during conventional piezo-assisted piercing only recently have been subject of investigation (Ediz et al., 2005). Mechanistic studies would establish a much-needed correlation between the (quantifiable) physical parameters of pipettes and piercing techniques with cellular response in the context of elasticity theory and biology. In terms of operator training and quantification of the exerted force, the advent of haptics in the context of robotics could provide quantification of cell injection force and also to improve success statistics in piercing and other operational procedures. There is already enough evidence suggesting that the combination of haptic and visual feedback improves handling (Pillaresetti et al., 2007). Further development of these technologies will, most likely, make them available to the bio-medical community at large. Novel piercing technologies have also appeared in the recent literature, such as Ross-Drill, promoting a rotational approach to cell piercing, rather than tangential (tipical of piezo-assited drilling) and claiming decreased training effort for operators. The possibility of combining Ross-Drill with FIB-polished pipettes has already been sugested (Campo et al., 2010.
CELL INJECTION | ROTATIONAL OSCILLATION-DRILL | ERGENC, EDIZ & OLGAC |
CELL INJECTION | MICROMANUFACTURING OF CUSTOMIZED TIPS IN GLASS CAPILARIES AND MICROFLUIDIC PLATFORMS | CAMPO & PLAZA |
CELL INJECTION | 3-D STUDY OF GLASS PIPETTE GEOMETRY BY MICROMACHINING TECHNIQUES | OSTADI & OLGAC |
CELL MICROINJECTION | USE OF CARBON NANOTUBES FOR ELECTROPHYISIOLOGY AND NANOFLUIDIC INJECTION | SCHRLAU&BAU |
CELLULAR/ SUBCELLULAR HANDLING | MICROMANUFACTURING OF CUSTOMIZED MANIPULATORS IN GLASS CAPILARIES | KOMETANI& MATSUI |
SUBCELLULAR MONITORING | MICROMANUFACTURIG OF CUSTOMIZED SENSORS AND ACTUATORS IN GLASS CAPILARIES | KOMETANI& MATSUI |
SUBCELLULAR DRUG DELIVERY | POLYMERIC MICELLE CARRIERS | GENG & DISCHER |
SUBCELLULAR DRUG DELIVERY | BACTERIA-MEDIATED DRUG DELIVERY | AKIN&BASHIR |
SUBCELLULAR DNA DELIVERY | POLYMER MICROSPHERES | WALTER & MERKLE |
SUBCELLULAR MONITORING AND DELIVERY* | PROOF OF CONCEPT: BIOCOM-PATIBLE INSERTION OF MICROCHIPS ON CELLS | FERNANDEZ-ROSAS, GOMEZ-MARTINEZ & PLAZA |
SMART MATERIALS** | PROOF OF CONCEPT: LCE PHOTO-PROPELLED IN AN AQUOUS ENVIRONMENT | CAMACHO-LOPEZ, PALFFY-MUHORAY & SHELLEY |
MECHANICAL ACTUATORS* | PROOF OF CONCEPT: BIMORPH THERMAL NANO- ACTUATORS BY FIB | CHANG & LIN |
HAPTIC TECHNOLOGY IN CELLULAR HANDLING | HAPTIC FEED-BACK IN COMBINATION WIH VISUAL INSPECTION DURING CELL PIERCING | PILLARISETTI & DESAI |
Future directions in micro-nanotechnologies applied to the life sciences are likely to build upon the approaches described in this chapter, which have been summarized in Table 3. Beyond piercing, technological developments such as cell-embedded silicon microparticles are likely to develop into micro-chips in the near future; posing a new paradigm shift in sub-cellular probing. In addition, novel actuation capabilities have been temptatively explored by Kometani‘s group producing an electrostatic-operated micromanipulator. Further, Chang et al., (Chang, 2009) have recently discussed a bimorph thermal actuator that combined thermal conductivity of FIB-depostied tungsten (W) with structural rigidity of DLC. This work is innovative as it introduces smart materials in microtechnology manufacturing in the production of cellular tools. On-going efforts to incorporate electro and photoactuators in the biomedical arena as artificial muscles are likely to expand to the subcellular domain and potential application contexts will be suggested, further paving the way for the incorporation of nano-opto-mechanical-systems (NOMS) in main stream research (http://www.noms-project.eu).
Acknowledgments
The authors gratefully acknowledge mentorship from Jose A. Plaza and Jaume Esteve at IMB-CNM CSIC and the cooperation of Elizabeth Fernandez-Rosas, (who conducted the cell biology experiments), Leonard Barrios, Elena Ibanez y Carmen Nogues from the Biology Department at the Universitat Autonoma de Barcelona. We are also indebted to Dr. Núria Sancho Oltra from the Department of Chemical and Biomolecular Engineering at the University of Pennsylvania for useful discussions. This work was partially supported by the Spanish government under Juan de la Cierva Fellowship, MINAHE 2 (TEC2005-07996-C02-01) and MINAHE 3 (TEC2008-06883-C03-01) projects and by the European Union FP7 under contract NMP 228916.
References
- 1.
Akin D. Sturgis J. Ragheb K. Sherman D. Burkholder K. Robinson J. P. Bhunia A. K. Mohammed S. Bashir R. 2007 Bacteria-mediated delivery of nanoparticles and cargo into cells nature. Nature Nanotechnology,2 April 2007),441 449 1748-3387 - 2.
Bao G. Suresh S. 2003 Cell and molecular mechanics of biological materials. Nature materials,2 November 2003),11 715 725 1476-1122 - 3.
Biener J. Mirkarimi P. B. Tringe J. W. Baker S. L. Wang Y. M. Kucheyev S. O. Teslich N. E. Wu K. J. Hamza A. V. Wild C. Woerner E. Koidl P. Bruehne K. Fecht H. J. 2006 Diamond Ablators for Inertial Confinement Fusion. ,49 4 737 742 1536-1055 - 4.
Biggers J. D. Mc Ginnis L. K. Raffin M. 2000 Amino Acids and Preimplantation Development of the Mouse in Protein-Free Potassium Simplex Optimized Medium. ,63 1 July 2000),281 293 0006-3363 - 5.
Botman A. Mulders J. J. L. Hagen C. W. 2009 Creating pure nanostructures from electron-beam-induced deposition using purification techniques: a technology perspective ,20 372001 pp),1748-3387 - 6.
Camacho-Lopez M. Finkelman H. Palffy-Muhorray P. Shelley M. . 2004 Fast liquid-crystal elastomer swims into the dark. ,3 May 2004),307 310 1476-4660 - 7.
Campo E. M. Lopez-Martinez M. J. Fernandez E. Ibanez E. Barros L. Nogues C. Esteve J. Plaza J. A. 2009 Sharpened transparent micronozzles fabrication for cell membrane piercing. .978-0-81947-450-6 San Jose, California, United States, January 2009 - 8.
Campo E. M. Lopez-Martinez M. J. Fernández E. Esteve J. Plaza J. A. 2009 Implementation of Ion-Beam techniques in microsystems manufacturing: Opportunities in cell biology. .0027-7786 0277 786 X, Monterey, May 2009 - 9.
Campo E. M. Lopez-Martinez M. J. Fernández E. Barrios L. Ibáñez E. Nogués C. Esteve J. Plaza J. A. 2010 Focus Ion Beam Micromachined Glass Pipettes for Cell Microinjection. ,12 2 April 2010),311 316 1572-8781 - 10.
Campo E. M. Campanella H. Huang Y. Y. Zinoviev K. Torras N. Tamargo C. Yates D. Rotkina L. Eteve J. Terentjev E. M. 2010 Electron Microscopy of Polymer-Carbon Nanotube Composites. .978-0-81948-217-4 Monterey, May 2010 - 11.
E.M. Campo, B. Mamojka, D. Wenn, I. Ramos, J. Esteve, and E.M. Terentjev ,2011 , “”, in preparation, SPIE NanoScience + Engineering August - 12.
Chang J. Min B. K. Kim J. Lin L. 2009 Bimorph nano actuators synthesized by focused ion beam chemical vapor deposition, 86,2364 2368 0167-9317 - 13.
Dinu C. Z. Chrisey D. B. Diez S. Howard J. 2007 Cellular Motors for Molecular Manufacturing. ,290 10 Setember 2007),1203 1212 1932-8494 - 14.
Ediz K. Olgac N. 2005 Effect of Mercury Column on the Microdynamics of the Piezo-Driven Pipettes. ,127 3 June 2005),531 535 0148-0731 - 15.
Ergenc A. Olgac N. 2007 New technology for cellular piercing: rotationally oscillating μ-injector, description and validation tests. ,9 6 December 2007),885 891 1387-2176 - 16.
Fernandez-Rosas E. Gomez R. Ibañez E. Barrios L. Duch M. Esteve J. Nogues C. Plaza J. A. 2009 Intracellular Polysilicon Barcodes for Cell Tracking. ,5 21 November 2),2433 2439 1613-6829 - 17.
Geng Y. Dalhaimer P. Cai S. Tsai R. Tewari M. Minko T. Discher D. E. 2007 Shape effects of filaments versus spherical particles in flow and drug delivery. ,2 April 2007),249 255 1748-3387 - 18.
Giannuzzi A. Stevie F. A. 2005 (1st edition), NY: Springer,978-0-38723-116-7 North Carolina State University (Eds.) - 19.
Gomez-Martinez R. Vázquez P. Duch M. Muriano A. Pinacho D. Sanvicens N. Sánchez-Baeza F. Boya P. de la Rosa E. Esteve J. J. Suárez T. Plaza J. A. 2010 Intracellular silicon chips in living cells.,6 4 February 2010)499 502 1613-6829 - 20.
Hess H. Fischer T. Agarwal A. Katira P. Finger I. Mobley E. Tucker R. Kerssemakers J. Diez S. 2008 Biomolecular motors challenge imaging and enable sensing. ,1605-7422 San Jose, January 2008 - 21.
Hoshino T. Kawamori M. Suzuki T. Matsui S. Mabuchi K. 2004 Three dimensional and multimaterial microfabrication using focused-ion-beam chemical-vapor deposition and its application to processing nerve electrodes. ,22 6 November 2004)3158 3162 1071-1023 - 22.
Huang T. Kimura Y. Yanagimachi . R. 1996 The use of piezo micromanipulation for intracytoplasmic sperm injection of human oocytes. ,13 4 320 328 1573-7330 - 23.
Ikeda T. Mamiya J. Yu Y. 2007 Photomechanics of Liquid-Crystalline Elastomers and Other Polymers. ,46 4 January 2007),506 528 1521-3773 - 24.
Ittner L. Götz J. 2007 Pronuclear injection for the production of transgenic mice. ,2 5 April 2007),1206 1215 1754-2189 - 25.
Iyer S. Romanowicz B. Laudon M. 2004 Biomoleculars motors. , Boston, March 2004 - 26.
Kim K. Lee M. Park H. Kim J. Kim S. Chung H. Choi K. Kim I. Seong B. L. Kwon I. C. 2006 Cell-Permeable and Biocompatible Polymeric Nanoparticles for Apoptosis Imaging. ,128 11 March 2006),3490 3491 0002-7863 - 27.
Kishigami S. Hikichi T. Van Thuan N. Ohta H. Wakayama S. Bui H. T. Mizutani E. Wakayama T. 2006 Normal specification of the extraembryonic lineage after somatic nuclear transfer. ,580 7 March 2006),1801 1806 0014-5793 - 28.
Kometani R. Morita T. Watanabe K. Kanda K. Haruyama Y. Kaito T. Fujita J. Ishida M. Ochiai Y. Matsui S. 2003 Nozzle-Nanostructure Fabrication on Glass Capillary by Focused-Ion-Beam Chemical Vapor Deposition and Etching. ,42 6B February 2003),4107 4110 0021-4922 - 29.
Kometani R. Hoshino T. Kondo K. Kanda K. Haruyama Y. Kaito T. Fujita J. Ishida M. Ochiai Y. Matsui S. 2005 Performance of nanomanipulator fabricated on glass capillary by focused-ion-beam chemical vapor deposition. ,23 1 January/February 2005),298 301 0073-4211 X - 30.
Kometani R. Hoshino T. Kanda K. Haruyama Y. Kaito T. Fujita J. Ishida M. Ochiai Y. Matsui S. 2005 Three-dimensional high-performance nano-tools fabricated using focused-ion-beam chemical-vapor-deposition. ,232 1-4 May 2005),362 366 0016-8583 X - 31.
Kometani R. Hoshino T. Kondo K. Kanda K. Haruyama Y. Kaito T. Fujita J. Ishida M. Ochiai Y. Matsui S. 2005 Fabrication of nanomanipulator with SiO2/DLC heterostructure by focused-ion-beam chemical vapor deposition. ,44 7B July 2005),5727 5731 0021-4922 - 32.
Kometani R. Funabiki R. Hoshino T. Kanda K. Haruyama Y. Kaito T. Fujita J. Ochiai Y. Matsui S. 2006 Cell wall cutting tool and nano-net fabrication by FIB-CVD for subcellular operations and analysis, ,83 4-9 1642 1645 0167-9317 - 33.
Kometani R. Koike H. Kanda K. Haruyama Y. Kaito T. Matsui S. 2007 Evaluation of a Bio Nano-Sensing Probe Fabricated by Focused-Ion-Beam Chemical Vapor Deposition for Single Organelle Analyses. Japanese Journal of Applied Physics,46 No., (December 2007),7963 7965 0021-4922 - 34.
Lacham-Kaplan O. Trounson A. 1995 Intracytoplasmic sperm injection in mice: increased fertilization and development to term after induction of the acrosome reaction. ,10 10 October 1995),2642 2649 0268-1161 - 35.
Lopez-Martinez M. J. Caballero D. Campo E. M. Perez-Castillejos R. Errachid A. Esteve J. Plaza J. A. 2008 FIB assisted technology in sub-picolitre micro-dispenser fabrication. ,18 7 July 2008), 075021,1361-6439 - 36.
Lopez-Martinez M. J. Campo E. M. Caballero D. Fernandez E. Errachid A. Esteve J. Plaza J. A. 2009 Versatile micropipette technology based on Deep Reactive ion Etching and anodic bonding for biological applications. ,19 10 October 2009), 105013,1361-6439 - 37.
Maas D. van Veldhoven E. Chen P. Sidorkin V. Salemink H. van der Grift E. Alkemade P. 2010 Nanofabrication with a Helium Ion Microscope. .7638 0027-7786 X, Monterey, May 2009 - 38.
Malboubi M. Ostadi H. Wang S. Gu Y. Jiang K. 2009 The Effect of Pipette Tip Roughness on Giga-seal Formation. ,978-9-88182-101-0 London, U.K. July, 2009 - 39.
Morita T. Kometani R. Watanabe K. Kanda K. Haruyama Y. Hoshino T. Kondo K. Kaito T. Ichihashi T. Fujita J. Ishida M. Ochiai Y. Tajima T. Matsui S. 2003 Free-space-wiring fabrication in nano-space by focused-ion-beam chemical vapor deposition. ,21 6 November 2003),2737 2741 1071-1023 - 40.
Mirakami M. Cabral H. Matsumoto Y. Wu S. Kano . M. R. Yamori T. Nishiyama N. Kataoka K. 2011 Improving Drug Potency and Efficacy by Nanocarrier-Mediated Subcellular Targeting. Science of Translational Medicine 3, 64ra2,1946-6242 1946 6242 - 41.
Nagy A. Gertsenstein M. Vintersten K. Behringer R. 2002 , 3rd ed, Cold Spring Harbor Laboratoy Press,978-0-87969-591-0 New York - 42.
Nishiyama N. 2007 Nanocarriers shape up for long life. ,2 April 2007),203 204 1748-3387 - 43.
Ostadi H. Malboubi M. Prewett P. D. Jiang K. 2009 3D reconstruction of a micro pipette tip,86 4-6 April-June 2009),868 870 0167-9317 - 44.
Palermo G. Joris H. Camus M. Devroey P. Van Steirteghem A. C. 1992 Pregnancies after intracytoplasmic injection of single spermatozoon into an oocyte.4 340 July 1992),8810 8817 0140-6736 - 45.
Pillarisetti A. Pekarev M. Brooks A. D. Desai J. P. 2007 Evaluating the Effect of Force Feedback in Cell Injection,” ,4 322 331 1545-5955 - 46.
Postek M. Vladár A. E. Kramar J. Stern L. A. Notte J. Mc Vey S. 2007 The helium ion microscope: a new tool for nanomanufacturing”,.6648 - 47.
Schrlau M. Brailoiu E. Patel S. Gogotsi Y. Dun J. Bau H. H. 2008 Carbon nanopipettes characterize calcium release pathways in breast cancer cells.19 32 July 2008),325102 EOF 1361-6528 - 48.
Scipioni L. Sanford C. Notte J. Thompson B.. Mc Vey S. 2009 Understanding imaging modes in the helium ion microscope. ,76 6 November-December 2009),3250 3255 1520-8567 - 49.
Shenoy D. K. Thomsen I. I. I. D. L. Srinivasanb A. Kellerc P. Ratna B. R. 2002 Carbon coated liquid crystal elastomer film for artificial muscle applications. ,96 2-3 February 2002),184 188 0092-4424 - 50.
Sutter Instruments. 2008 97 Pipette cookbook (Rev. D). - 51.
Utke I. Hoffmann P. Melngailis J. 2008 Gas-assisted focused electron beam and ion beam processing and fabrication. 26,1197 1272 ISSN0073-4211 X - 52.
Verpoorte E. De Rooig N. F. 2003 Microfluidics meets MEMS. ,91 6 June 2003),930 953 0018-9219 - 53.
Voldman J. Gray M. L. Schmidt M. A. 1999 Microfabrication in Biology and Medicine. ,01 August 1999),401 425 1523-9829 - 54.
Walter E. Dreher D. Kok M. Thiele L. Kiama S. G. Gehr P. Merkle H. P. 2001 Hydrophilic poly(DL-lactide-co-glycolide) microspheres for the delivery of DNA to human-derived macrophages and dendritic cells. ,76 1-2 Setember 2001),149 168 0168-3659 - 55.
Weibel D. B. Di Luzio W. R. Whitesides G. M. 2007 Microfabrication meets microbiology. ,5 3 March 2007),209 218 1740-1526 - 56.
Yaul M. Bhatti R. Lawrence S. 2008 Evaluating the process of polishing borosilicate glass capillaries used for fabrication of in- vitro fertilization (iVF) micro-pipettes. ,10 1 February 2008),123 128 1387-2176 - 57.
Yoshida N. Perry A. C. F. 2007 Piezo-actuated mouse intracytoplasmic sperm injection (ICSI). ,2 2 March 2007)296 304 1754-2189
Notes
- Reprinted from Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 232, No. 1-4, Kometani, R.,Hoshino, T., Kanda, K., Haruyama, Y., Kaito, T., Fujita, J., Ishida, M., Ochiai, Y., & Matsui, S. , Three-dimensional high-performance nano-tools fabricated using focused-ion-beam chemical-vapor-deposition, pp. (362-366), 2005, with permission from Elsevier
- With kind permission from Springer Science+Business Media: Biomedical Microdevices, Evaluating the process of polishing borosilicate glass capillaries used for fabrication of in - vitro fertilization (iVF) micro-pipettes, Vol. 10, No. 1, (2008), pp. (123-128), Yaul, M., Bhatti, R., & Lawrence, S. Figures 8 and 9.
- Reprinted from Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 232, No. 1-4, Kometani, R.,Hoshino, T., Kanda, K., Haruyama, Y., Kaito, T., Fujita, J., Ishida, M., Ochiai, Y., & Matsui, S. , Three-dimensional high-performance nano-tools fabricated using focused-ion-beam chemical-vapor-deposition, pp. (362-366), 2005, with permission from Elsevier
- This material is the reproduction from . Japanese Journal of Applied Physics, Vol. 42, No. 6B, (February 2003), pp. 4107-4110, Nozzle-Nanostructure Fabrication on Glass Capillary by Focused-Ion-Beam Chemical Vapor Deposition and Etching, 2003, Kometani, R., Morita T., Watanabe, K., Kanda K., Haruyama, Y., Kaito, T., Fujita, J., Ishida, M., Ochiai, Y., & Matsui, S.
- Reprinted with permission from Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, Vol. 23, No. 1, pp. (298-301), Performance of nanomanipulator fabricated on glass capillary by focused-ion-beam chemical vapor deposition, Kometani, R., Hoshino, T., Kondo, K., Kanda, K., Haruyama, Y., Kaito, T., Fujita, J., Ishida, M., Ochiai Y., & Matsui, S. (2005) American Vacuum Society.
- Reprinted from Microelectronic Engineering, Vol. 83, No. 4-9, , Kometani, R., Funabiki, R., Hoshino, T., Kanda, K., Haruyama, Y., Kaito, T., Fujita, J., Ochiai, Y., & Matsui, S., Cell wall cutting tool and nano-net fabrication by FIB-CVD for subcellular operations and analysis, pp. (1642-1645), (2006), with permission from Elsevier
- With kind permission from Springer Science+Business Media: Biomedical Microdevices, Focus Ion Beam Micromachined Glass Pipettes for Cell Microinjection., Vol. 12, No.2, 2010, pp. (311–316), Campo, E.M., Lopez-Martinez, M. J., Fernández, E., Barrios, L., Ibáñez, E., Nogués, C., Esteve, J., & Plaza, J.A.
- With kind permission from Springer Science+Business Media: Biomedical Microdevices, Focus Ion Beam Micromachined Glass Pipettes for Cell Microinjection., Vol. 12, No.2, 2010, pp. (311–316), Campo, E.M., Lopez-Martinez, M. J., Fernández, E., Barrios, L., Ibáñez, E., Nogués, C., Esteve, J., & Plaza, J.A.
- With kind permission from Springer Science+Business Media: Biomedical Microdevices, Focus Ion Beam Micromachined Glass Pipettes for Cell Microinjection., Vol. 12, No.2, 2010, pp. (311–316), Campo, E.M., Lopez-Martinez, M. J., Fernández, E., Barrios, L., Ibáñez, E., Nogués, C., Esteve, J., & Plaza, J.A.
- Reproduced with permission from IOP: Journal of Micromechanics and Microengineering, Versatile micropipette technology based on Deep Reactive ion Etching and anodic bonding for biological applications, . (2009), Vol. 19, No. 10, pp. 105013, Lopez-Martinez, M.J. , Campo, E. M., Caballero, D., Fernandez, E., Errachid, A., Esteve, J., & Plaza, J.A
- Reproduced with permission from IOP: Journal of Micromechanics and Microengineering, Versatile micropipette technology based on Deep Reactive ion Etching and anodic bonding for biological applications, . (2009), Vol. 19, No. 10, pp. 105013, Lopez-Martinez, M.J. , Campo, E. M., Caballero, D., Fernandez, E., Errachid, A., Esteve, J., & Plaza, J.A