Open access peer-reviewed chapter

Multiset-Based Assessment of Resilience of Sociotechnological Systems to Natural Hazards

By Igor Sheremet

Submitted: September 29th 2018Reviewed: December 12th 2018Published: February 1st 2019

DOI: 10.5772/intechopen.83508

Downloaded: 149

Abstract

The chapter describes multiset-based approach to the assessment of resilience/vulnerability of the distributed sociotechnological systems (DSTS) to natural hazards (NH). DSTS contain highly interconnected and intersected consuming and producing segments, and also resource base (RB), providing their existence and operation. NH impacts may destroy some local elements of these segments, as well as some parts of RB, thus initiating multiple chain effects, leading to negative consequences far away from the NH local strikes. To assess DSTS resilience to such impacts, multigrammatical representation of DSTS is used. A criterion of DSTS sustainability to NH, being generalization of similar criterion, known for industrial (producing) systems, is proposed. Application of this criterion to critical infrastructures is considered, as well as solution of the reverse problem, concerning subsystems of DSTS, which may stay functional after NH impact.

Keywords

  • resilience and vulnerability
  • natural hazards
  • sociotechnological systems
  • critical infrastructures
  • multisets
  • multiset grammars
  • unitary multiset grammars

1. Introduction

Modern large-scale distributed sociotechnological systems (DSTS) include anthropogenic and technogenic components, i.e., humans and various technical devices, respectively, operating in common in order to provide sufficient quality of life to humans, and this sufficiency may be defined by some threshold amounts of resources, consumed by them during some fixed period of life. These resources, in turn, must be produced and relocated from places of their production to places of their consumption by application of the aforementioned devices and their aggregates. The last also uses specific resources, necessary for their operation.

By this, every DSTS may be represented as composition of two segments—consuming and producing (both containing humans and devices)—and resource base, which provides their existence and operation. These segments are highly interconnected and intersect, because a large number of humans and devices are consumers and creators of resources simultaneously.

Natural hazard impacts (NHI) may destroy some local elements of the aforementioned segments and resource base, and this destruction initiates multiple chain (or cascading) effects, caused by the absence or lack of resources, necessary for normal operation of some devices and/or humans; such effects may lead to the destructive consequences far away from places (areas) where natural hazard (NH) occurred.

By growth of complexity of DSTS and degree of their internal interconnectivity, it becomes more and more difficult to assess such consequences and, as a whole, resilience (or, reversely, vulnerability) of DSTS to various NH. Here, we shall understand DSTS resilience to NH as its property not to reduce humans’ quality of life lower than some predefined level (as was said higher, it may be determined by the amounts of resources, consumed by anthropogenic part of DSTS).

Well-known approaches to formal description and solution of DSTS resilience/vulnerability problems, integrally considered in [1], are not applicable to most practical cases by the reason of only partial adequacy of representation of the main structural and functional features of DSTS, as well as by the reason of sharply increasing computational complexity of detecting algorithms on real dimensions.

As it was shown in [1, 2], multiset-based approach to such assessment is one of the most suitable perspectives from both descriptional and computational points of view. The core of this approach is representation of technological base of the industrial systems (IS), producing necessary resources, by special multiset grammar (MG), and its resource base (RB)—by multiset (MS).

The simplest formal definition of resilience of IS, completing some order, is based on the presumption, that if RB, reduced by NHI, is, nevertheless, sufficient for this order completion by at least one possible way, then such IS is resilient to this impact.

However, this definition and all formalizing it relations concern only industrial systems (producing segments of DSTS) and single orders, so until now criterion of DSTS resilience in multiset-based form is unknown. The main reason for this is that there is no technique for the assessment of the whole set of orders, which may generate consuming segment of DSTS. So, this chapter is dedicated to consideration of such general case. The basic presumption for all lower discourse is that DSTS after NHI has no any opportunity to contact with external systems in order to compensate loss of resources, being the result of NHI, i.e., DSTS is a “closed system” in terms of [3, 4]. Also, NHI is considered as single instant strike, which touches some finite set of places (areas), destroying all material objects located there.

Section 2 contains brief consideration of the previous results on IS resilience. Section 3 is dedicated to generalization of the known criterion of IS resilience on the case, when resource base of IS contains not only primary (terminal) resources but also resources, produced by IS since the start of its operation upon the initial state of RB until the moment of NHI. Section 4 is dedicated to the multigrammatical representation of local sociotechnological systems (STS) and formulation of criterion of their resilience, while Section 5—to the general case of DSTS. The current global reality makes extremely important development of a toolkit for the assessment of resilience of multiple interconnected DSTS, producing and delivering to the consumers specific types of resources (electrical energy, fuel, water, etc.). Such DSTS are addressed usually as critical infrastructures (CI), following their critically important mission for whole countries and world regions [5, 6, 7, 8, 9, 10, 11]. The basic approach of the proposed criteria application to CI is considered in Section 6. After NHI, some subsystems of vulnerable DSTS may stay in the active state ready for operation. So, the reverse problem, concerning such subsystems detection, is studied in Section 7. Possible directions of development of the proposed approach is announced in the conclusion.

2. Assessment of resilience of industrial systems

Let us remind that multiset is a set of multiobjects (MO) that is written as

v=n1a1nmam,E1

where vis the name of multiset and n1a1,,nmamare the multiobjects, entering this MS; the integer number ni,i=1,,mis called multiplicity of object ai, which means, that v contains n1identical objects a1,,nmidentical objects am, and for ijaiaj. Set

βv=a1amE2

is called basis of multiset v. Both object aand multiobject naare said to be entering v that is written without ambiguity as avand nav. From the substantial point of view, object a and multiobject 1aare equivalent. In general case, multiplicities may be not only positive integers but also positive rational numbers [12, 13]. Empty set and empty multiset are denoted . Further in this chapter objects will be denoted also by symbol b with indices, as well as by strings of italic symbols.

The main multiset-based tool, which would be used below, is unitary multiset grammars (UMG) (we shall use also “multigrammar” as synonym of “multiset grammar”) [12, 13].

UMG is a couple S=<a0,R>, where a0is called title object and Ris called scheme, being the set of unitary rules (UR), having the form

an1a1,,nmam,E3

where object ais called head and list n1a1,,nmambody of this UR. List is interpreted as multiset, i.e., n1a1nmam.

The so-called structural and technological interpretations of unitary rules are used in the IS resilience assessment [2].

According to structural interpretation, (3) means that some material (physical) object (unit of resource) a consists of n1objects a1,,nmobjects am(to distinguish mathematical notion “object” from the physical one, we shall use below notion “object/resource,” abbreviated OR).

Technological interpretation is an extension of the structural one, so that the body of UR

an1a1,,nmam,n1a1,,nkakE4

contains structural components (usually spare parts of the produced device), which are MO n1a1,,nmam, as well as resources, which are necessary for assembling (manufacturing) a from these components and are represented by MO n1a1,,nkak.

Example 1. Let S=<aircraft,R>, where Rcontains the following two unitary rules:

aircraft1fuselage,2wing,
wing1frame,1engine,4wheel.

According to structural interpretation, this means that aircraft consists of fuselage and two wings. Any of the wings consists, in turn, of frame and engine, as well as four wheels, all connected to the wing frame. Let now S=<aircraft,R>, where Rcontains the following two URs:

aircraft1fuselage,2wing,10kW,160mbtasmaircraft,150000USD
wing1frame,1engine,4wheel,12kW,240mntasmwing,400000usd.

According to the technological interpretation of UR, this means that assembling aircraft from a fuselage and two wings requires 160 min of operation of the aircraft’s assembling line, 10 kW of electrical energy, as well as 150,000 dollars being the total cost of this work. Similarly, assembling one wing from the frame, engine, and four wheels requires 12 kW, 240 min of operation of the wing’s assembling line, and 400,000 dollars.

As seen, UMG provide easy and natural decomposition of complicated technological systems (devices) until elementary (non-decomposed) objects and resources, used in the manufacturing process.

A set of objects, having placed in the UMG S, is denoted AS, while a set of so-called terminal objects, having placed only in bodies of UR, is denoted A¯S. Evidently, A¯SAS. Objects, entering set AS A¯S, are called non-terminal. Similarly, corresponding OR also may be terminal and non-terminal.

Mathematical semantics of unitary multiset grammars is defined in such a way that UMG S=<a0,R>is applied for generation of the set of multisets (SMS) VSaccording to the following relations:

V0=1a0,E5
Vi+1=VivVirRπvr0,E6
πv<an1a1nmam>=vna+nn1a1nmam,ifnavotherwiseE7
VS=V,E8

where UR an1a1,,nmamfor unambiguity is represented in the angle brackets, and +,,are symbols of operations on multisets (addition, subtraction of multisets, and multiplication of constant on multiset, respectively) [1, 2, 12, 13].

As seen from (5) to (8), new multisets are generated by applying all unitary rules rRto SMS Vi, created on previous isteps. Every such UR an1a1,,nmamis applied to MS vViby a special function π. If vcontains MO na, it is replaced by MS nn1a1nmamand by semantics of MS addition, and after that multiplicities of the identical objects are summarized; otherwise, the result of πapplication is an empty set.

Described generation process is in general case infinite, and SMS VS, defined by UMG S, is its fixed point V.

Terminal multiset (TMS) vVScontains only terminal objects, i.e.,

βvA¯S,E9

and the set of terminal multisets (STMS) is denoted V¯S.

Further in this chapter if it will not be said the contrary, we shall consider only finitary UMG, which define finite STMS. UMG Sis finitary, if these exists isuch, that Vi=Vi+1, and if so, Vi=VS. The problem of recognition of UMG finitarity is algorithmically decidable [12, 13].

Example 2. As may be seen, UMG Sand Sfrom the previous example are finitary, and, according to (5)(8),

V¯S=1fuselage2frame2engine8wheel,
V¯S'={{1fuselage,2frame,2engine,8wheel,34KW,160mntasmaircraft,480mntasmwing,950000usd}}.

Returning to the considered application of UMG, i.e., description and assessment of industrial systems, we may represent technological base (TB) of IS (set of its producing devices) as scheme R of UMG:

S=<tb,R>,E10

where tbis the title object and Ris the set of unitary rules in the technological interpretation.

Order, completed by IS with TB S, may be represented by MS

q=n1b1nlbl,E11

which means goal of this order is to obtain n1OR b1, …, nlOR bl. The set of possible variants of resource amounts, necessary for order qcompletion, is nothing, but set of TMS, generated by UMG:

Sq=<tbq,R<tbqn1b1nlbl>>,E12

i.e., STMS V¯Sq(for short we shall use V¯qinstead of it).

In general case V¯q>1because of the possibility of multiple ways of order completion, which usually is a consequence of some redundancy of TB (however, such redundancy is the background of IS resilience, as it will be shown below).

Resource base of IS may be represented by MS v=n1a1nkakin such a way that n1OR a1,,nkOR akare available to technological base R while orders completion.

Described representation of TB and RB makes it quite simple to formulate criterion of possibility of order completion.

Statement 1. Order qto IS with technological base R and resource base vmay be completed, if

v¯V¯qv¯v.E13

Such RB v is called sufficient for order qcompletion by IS.

For further consideration of resilience/vulnerability issues, it is useful to unify TB and RB by including to the bodies of URSin the technological interpretation of one additional multiobject 1r, where ris the name of the device, which provides manufacturing (assembling) OR, defined by the head of UR. By this, the presence of multiobject nrin the resource base is equivalent to the possibility of nmanufacturing cycles, executed by device rwhile current order completion.

Described techniques integrate TB and RB in the integral resource base, which does not contradict to the reality, because multiobjects like nrrepresent, in fact, technological (active) resources of IS, along with passive resources, consumed by devices.

Note that there may be one and the same object rin different UR bodies that reflects the capability of device rto produce one and the same OR by various ways or even to produce various OR. Moreover, in general case, there may be not only multiobjects like 1rin the UR bodies but also lr, where l>1, that, in fact, allows to represent the duration of manufacturing cycle, providing creation of one unit of OR a, represented by the head of the UR. This technique is simply implemented by the use of so-called composite objects, or composites, like t-r, where “-” is the divider, ris the unique identifier of manufacturing device, and tis the time unit (second, minute, etc.), so lt-r means that there are sufficient ltime units of work of device r to produce one unit of OR a, represented by the head of the UR. Both r and t are strings in some basic alphabet, and t does not contain divider “-”.

If resource base of IS contains multiobjects like Lt-r, that means there are Lunits of time of work of device ravailable while current order completion.

Speaking about the use of time in UR, we must take into account that time is not fully an additive resource; it is additive regarding only separate device. If to consider the whole IS, then due to parallel operation of various devices, time, spent for order completion, may be less than in the case of their sequential application. Precise modeling of IS operation is possible on the basis of the so-called temporal multiset grammars, introduced in [2], which will be considered thoroughly in the separate publications.

Example 3. Let S=<aircraft,R>be as in Example 1, order q=raircraft, and IS resource base is

v={6fuselage,10frame,12engine,40wheel,250kW,800mntasmaircraft,2600mntasmwing,1000000usd}}.

As seen, order qmay be completed with technological base Rand resource base v, which is sufficient for this order completion.

However, if

v={6fuselage,10frame,3engine,12wheel,250kW,800mntasmaircraft,2600mntasmwing,1000000usd}},

then order qcannot be completed, and RB vis not sufficient, because there is lack of five engines for manufacturing four aircrafts.

Let us consider now IS, affected by natural hazard impact, which may be represented by multiset Δv, defining amounts of resources, eliminated by NHI from IS resource base, so the last becomes vΔv.

Concerning passive resources, such representation is quite evident: if NHI destroys nOR afrom n, which had placed in RB before the impact, then the remained amount of these OR will be nn(if n<nor n=n, all such OR will be eliminated from RB), so respective multiobject, entering vΔv, will be nna. In the case of active resources, ntrΔvmeans that ntime units of operation of ithdevise rwould be lost, so this device may not execute all work, which it would do while order completion, and this obstacle may be the reason for IS vulnerability. So, similar to passive resources, the result of NHI regarding active resource would be nntr. If n=, the result of NHI would be elimination of MO ntrfrom R; when implemented, may be replaced by some very large number N, which is greater than any possible multiplicity, ever used in TB and RB representations.

Let IS has TB R and RB v, which is sufficient for order qcompletion.

Statement 2. IS, completing order q, is resilient to NHI Δv, if reduced RB vΔvis sufficient for this order completion. Otherwise, this IS is vulnerable to this NHI.

This criterion is basic for distributed industrial systems (DIS), in which facilities are located at different places (areas) and some of them may be affected by NHI. Every such impact may destroy some of the aforementioned facilities, eliminating some local parts of TB and RB, thus reducing its capabilities for order completion.

To represent DIS, OR, having placed in unitary rules and multisets, are extended by geospatial information in such a way that a/z, where “/” is the divider, means that OR ais located at place z. Both aand zare the strings in some basic alphabet, excepting “/”, and zis the name of location.

We use names of locations instead of their usual coordinate representations (CR), supposing that there is a separate key-addressed database, containing couples <z,X>, where key zis the name of place and Xis its CR in any possible form (points of perimeter, center of the circle along with its radius, etc.), most convenient for concrete location. This database provides the simplest implementation of intersection of two locations, which is the basic operation in the algorithmics of assessment of resilience of any distributed systems.

Since the described extension, all UR have the form

a/zn1a1/z1,,nmam/zm,E14

that means OR amay be produced at location z, if there are n1OR a1at location z1,,nmOR amat location zm. As seen, a/z,a1/z1,,am/zmare also composites.

Representation of time resource is just the same: if MO ntr/zenters UR body, that means follows: to produce OR a, located at place z, device r, located at place z, would operate for ntime units.

Similarly, resource base would be

v=n1a1/z1nkak/zk,E15

as well as order

q=n1b1/z1nlbl/zl.E16

The new moment is the representation of NHI by set zof affected by it locations (in general case, areas):

Z=z1zp.E17

For simplicity we shall limit a variety of locations having placed in (14)(17) by points, while in (17) every zimay be an area of any form. Also, we shall use denotation Z¯for the set of points entering Z(it is join of sets z1,,zp).

To formulate the criterion of resilience of DIS, we shall use relation zZ¯that means point zenters set Z¯.

Let us define

ΔvZ=na/zna/zv&zZ¯,E18

i.e., multiset of OR, affected by NHI z, because they are located at the affected points. Thus, all these OR must be eliminated from the resource base, being destroyed by the impact.

Let DIS has TB R and RB v, which is sufficient for order qcompletion.

Statement 3. DIS, completing order q, is resilient to NHI z, if reduced by it RB, vΔvZis sufficient for this order completion. Otherwise, this DIS is vulnerable to this NHI.

Concerning affected active resources, it is reasonable to underline that NHI may destroy them up to unrecoverable state (this may be represented by inclusion to ΔvMO Ntr/z) or, in the better case, transfer them to the unoperational, but reparable, state, that may be represented by inclusion to ΔvMO ntr/z, where nis less than multiplicity nof OR tr/zv.

By this we finish a short survey of known results on resilience of industrial systems. Before we move to sociotechnological systems, let us generalize the introduced criteria.

3. Generalized criterion of resilience of industrial systems

As seen, both introduced criteria of IS resilience operate only terminal resources, which are used by IS for production of amounts of OR, being the goal of order. By this, they trivially repeat criterion of order completeness (12) with the only replacement of the IS initial resource base by RB, reduced by NHI.

However, if to take into account that there may be some non-terminal OR, already manufactured by IS during time interval between the start of order completion and moment of NHI, it would be sensible to consider these OR during recognition of IS resilience, or, in the other words, to generalize notion of resource base, including to RB not only terminal, but also non-terminal OR.

But, evidently, this generalization makes the introduced criteria non-applicable. Let us propose correct criterion for the case of RB, containing not only terminal but also non-terminal OR.

For this purpose we propose here so-called unitary multiset grammars with reduced generation (UMG RG).

UMG RG is triple Sv0=<a0,R,v0>, where a0and Rare, as higher, the title object and scheme, respectively, and v0is the multiset, which may contain non-terminal multiobjects, used for elimination of the number of generation steps. So, this version of UMG has specific semantics, which fully corresponds to the sense of order completion by the use of aforementioned RB.

The main difference of UMG RG from UMG is that they generate not multisets, but pairs <v,v>, where vis the MS, created while previous generations steps, and vis the rest of RB, which may be used at the next such step.

If there is a non-terminal multiobject nain multiset v, and at the same times MS vincludes MO na, then following action depends on the relation between nand n. If n>n, then there are already nOR ain the resource base, and there is no any need to manufacture them—it is sufficient to manufacture nnOR aand eliminate nOR afrom vto represent that they are already used while order completion. If nn, then all necessary OR aare already in the RB, and there is no need in generation here at all; it is sufficient to subtract na, so there would be MO nnain the RB after this action, because nOR aare spent (if n=n, there would be no OR ain the RB).

Formal definition of semantics of UMG RG Sv0=<a0,R,v0>, i.e., a set of relations, describing generation of a set V¯Sv0of pairs <v,v>, is as follows:

V¯0=<1a0v0>,E19
Vi+1=Vi<v,v>VirRφvvr,E20
φvv<an1a1nmam>==<vna,vna>,ifnav&nav&nn<vna+nnn1a1nmam,vna>,ifnav&nav&n0&n<nnav&n=0otherwise,E21
V¯Sv0=V.E22

This definition fully corresponds to the previous verbal description and is similar to (5)(8). The mission of function φ, defined by (21), is the same as the mission of function π, defined by (7). Some comments would be done to its second alternative, namely, the case where multiset vdoes not contain OR aat all (or, just the same, multiplicity nof multiobject na, entering v, is zero); this is equivalent to a more general case, when navand non-zero multiplicity nis less than n. As seen, the result of subtraction of the empty multiset na, where n=0, from multiset v, is unchanged v, and this branch of (21) is just the same, as the first alternative of (7).

The introduced UMG RG provide formulation of the generalized criterion of IS resilience.

Let q=n1b1nlblbe order, R—technological base of the industrial system, and v—its resource base, such that

βvAs.E23

(That is, it contains not only terminal but also non-terminal OR). Consider UMG RG Sqv=<tbq,Rq,v>, where

Rq=R<tbqn1b1nlbl>.E24

(Here, UR is written in the angle brackets for unambiguity.)

Statement 4. Order qto IS with technological base Rand resource base vmay be completed, if

<v¯v¯>V¯Sqvv¯v¯.E25

As seen, if RB does not contain non-terminal OR, (25) and (13) are equivalent. As higher, RB, relevant to criterion 4, is called sufficient for order qcompletion by IS. Evidently, v¯v¯is RB, remained after completion of order q.

Example 4. Let S=<aircraft,R>be as in Example 1, order q=4aircraft, and resource base of the industrial system is v=6fuselage12wing300kW800mntasmaircraft1100000usd.

As seen,

Sqv=<tbq,Rq,v>,

where

Rq=R<tbq4aircraft>,

and resource base vcontains non-terminal multiobject 12wing, which means 12 wings are already manufactured and ready to be mounted to fuselages in order to make aircrafts.

According to (19)(21), V¯Sqv=<v¯v¯>, where

v¯=4fuselage40kW640mntasmaircraft600000usd,v¯=6fuselage4wing300kW800mntasmaircraft1100000usd.

Because v¯v¯, order qmay be completed by IS due to the number of already manufactured wings, which is greater than the required for manufacturing of four aircrafts. ∎

Let resource base vbe sufficient for order qcompletion by IS with technological base R, and Δvis NHI on this system.

Statement 5. IS, completing order q, is resilient to NHI Δv, if

<v¯v¯>V¯SqvΔvv¯v¯.E26

Otherwise, this IS is vulnerable to this NHI. ∎

This criterion may be generalized on distributed IS in the same manner, as it was done in [2] and described in the previous section.

Let RB vbe sufficient for order qcompletion by DIS with TB R, and Zis NHI on this system.

Statement 6. DIS, completing order q, is resilient to NHI Z, if

<v¯v¯>V¯SqvΔvZv¯v¯.E27

Otherwise, this DIS is vulnerable to this NHI. ∎

It is clear that DIS RB contains both terminal and non-terminal objects, located at various places.

Example 5. Let DIS be represented by UMG S=<aircraft/z1,R>, where Rcontains the following unitary rules:

aircraft/z11fuselage/z1,2wing/z1,10kW/z1,wing/z21frame/z2,1engine/z2,4wheel/z2,12kW/z2,wing/z11wing/z2,1000lpetrol/z2,1vel/z2,lpetrol/z21lpetrol/z3,1link/z3,1pump/z3,0.001kW/z3.

Here, the first two UR are slightly modified versions of technological base, described by UMG S; the only difference is that all OR are composites, including names of locations. As seen, aircrafts are assembled at place z1, while wings—at place z2. The third UR defines that to remove one wing to z1from z2, some transportation vehicle vel must be used, and also 1000 liters of petrol for its refueling, necessary for wing removal to z1and return to z2. At last, the fourth UR defines that to transport petrol from place z3, where it is stored, there is used pipeline fragment, consisting of link and pump, the latter consuming 0.001 kW of electrical energy to remove 1 liter of petrol from z3to z2. Assembling one aircraft and one wing is also an energy-consuming operation that is represented by multiobjects 10kW/z1and 12kW/z2, having placed in the bodies of the first and the second UR, respectively.

Let order q=2aircraft/z1, and resource base of DIS is

v={3fuselage/z1,2wing/z1,4frame/z2,5engine/z2,8wheel/z2,500lpetrol/z2,1wing/z2,100vel/z2,10000lpetrol/z3,100000link/z3,100000pump/z3,50kW/z1,150kW/z2,200kW/z3}.

This means that at location z1there are three fuselages, ready to be mounted with wings, but there are only two wings at this location, so two more wings, necessary for the production of two aircrafts, must be removed to z1from z2. However, there are two ready wings at z2; there is only one such wing, as well as four frames, five engines, and eight wheels, which may be used for manufacturing of some additional number of wings. Moreover, there is transportation vehicle vel at z2, which may remove ready wings from z2to z1, and also 500 liters of petrol for refueling this vehicle. But, as seen, this amount of petrol is not sufficient for the relocation of two wings from z2to z1. So, the required amount of petrol, i.e., 500 liters, must be removed by the pipeline to z2from z3, where petrol storage is located, containing at the current moment 10,000 liters of this fuel. Multiobjects 100000link/z3and 100000pump/z3represent the technical state of petrol pipeline link and pump, which is sufficient for execution of 100,000 working cycles, each providing removal of 1 liter of petrol from z3to z2. Similarly, MO 100vel/z2represents the technical state of the vehicle, which is able to make 100 transportation cycles from z2to z1and back without repair.

This verbal description makes it evident, how in fact order completion may be planned by UMG RG application. Let us consider how it is really done according to (19)(21):

V¯Sqv=<2aircraft/z1v>=<2fuselage/z14wing/z120kW/z1v>=<2fuselage/z11wing/z120kW/z1v3wing/z1>={<2fuselage/z11wing/z21000lpetrol/z21vel/z2,v3wing/z1>}={<{2fuselage/z1,20kW/z1,1frame/z2,1engine/z2,4wheel/z2,12kW/z2,1000lpetrol/z2,1vel/z2},v3wing/z1>}={<{2fuselage/z1,20kW/z1,1frame/z2,1engine/z2,4wheel/z2,12kW/z2,500lpetrol/z3,500link/z3,500pump/z3,1kW/z3},v3wing/z1500l/petrol/z2>}.

Because

{2fuselage/z1,20kW/z1,1frame/z2,1engine/z2,4wheel/z2,12kW/z2,500lpetrol/z3,500link/z3,500pump/z3,1kW/z3}{3fuselage/z1,50kW/z1,4frame/z2,5engine/z2,8wheel/z2,150kW/z2,9500lpetrol/z3,100000link/z3,100000pump/z3,200kW/z3},

order qis completed by DIS with technological base R and resource base v; the latter is sufficient for this order completion.

If this DIS is affected by NHI Z=z3,then

vΔvZ=3fuselage/z150kW/z14frame/z25engine/z28wheel/z2150kW/z2,

and, as may be seen without generation, DIS is vulnerable to this NHI while order qcompletion. This means that destruction of petrol storage, necessary for refueling of transportation vehicle, which, in turn, is necessary for assembled wing removal to the place of the final assembling of aircraft, makes impossible completion of the order, i.e., manufacturing of two aircrafts. ∎

This example is a primary illustration of multigrammatical representation and modeling of chain effects, occurring in distributed industrial systems as a result of NHI.

Now, we have the widest criterion of resilience of distributed industrial system, completing single order, to natural hazard impact. The thing is that in general case there is a flow of such orders, generated by human segment of distributed sociotechnological system.

It is evident that DSTS would be considered resilient to NHI, if the aforementioned flow would be completed by the producing (industrial) segment of this system with resource base, reduced by this NHI.

Before we move to further discourse, let us clarify interconnections between basic notions, which will be used below.

As it was said in Section 1, any sociotechnological system includes anthropogenic and technogenic parts—humans and used by them technical devices (systems). We call them human and technological segments (STS HS and STS TS, respectively). From the order side, STS include producing (industrial) and consuming segments (STS IS and STS CS, respectively), both consisting of humans and devices. So, there are humans and devices that participate in the manufacturing process and produce resources, which, in turn, are necessary for their own existence and operation, as well as for all other humans and devices, not participating in the manufacturing process and thus entering only consuming segment.

The described decomposition of STS will be exclusively important while studying issues, concerning consequences of total robotization of the industry, logistics, and various services that lead to massive unemployment, and the main problem to solve this will be to assess, whether global technosphere and natural resource base would be able to provide sufficient quality of life of unemployed people, as well as other groups of population, being out of the producing segment.

However, here we shall use the described decomposition of STS for continuation of development of criterial base of their resilience. To consider distributed STS at all, we shall begin from the simplest case of local STS.

4. Multigrammatical representation of local sociotechnological systems and criterion of their resilience

Let us consider first the local case, where all humans live and work at a single place. If so, decomposition of the human socium, having placed at this location, may begin from the unitary rule

socium1structures,1persons,E28

where non-terminal object structuresis a start point for all business and state structures, while non-terminal object personsis similarly a start point for individuals, not entering any of the aforementioned structures.

Object structuresis the head of the single unitary rule

structuresm1str1,,mkstrk,E29

that means there are m1structures (of type) str1,,mkstructures (of type) strk; if any str i of str1,,strkis unique, then mi=1.

Any structure may be decomposed to substructures, individual positions, and multiple access technological systems (MATS), used by personnel of this structure and its substructures. Relevant unitary rules would have the following form:

strn1pstn1,nppstnp,m1str1,,msstrs,l1tech1,,lttecht,E30

which means there are n1,,nppositions pstn1,,pstnpand m1,,mssubstructures str1,,strs, as well as l1,,ltMATS tech1,,techt(all, respectively). Every substructure is decomposed in the same way recursively until substructures, which multigrammatical representation is like

strn1pstn1,,nppstnp,l1tech1,,lttechtE31

or

strn1pstn1,,nppstnp,E32

i.e., they have no any substructures, but in general case may have MATS, providing their operation.

MATS, in turn, operate due to some attached (affiliated) personnel, which mission is to maintain technological system in the active state and apply it according to its destination. Also, MATS may consist of some subsystems, each with its own personnel, and its multigrammatical representation in general case may be as follows:

techn1pstn1,,nppstnp,l1tech1,,lstechs,E33
techl1tech1,,lstechs,E34

the latter case corresponding to the fully robotized (unmanned) system. Every techi, in turn, may be decomposed recursively until terminal objects, which names have been placed only in the bodies of unitary rules.

Concerning the second multiobject from the body of UR (28), it may be approved that all set of individuals of the considered STS may be divided to subsets (classes), each joining person with the similar sets of personal technical devices and consumed resources. This may be represented by unitary rule

personn1person1,,nlpersonl,E35

and

personik1ires1i,,kriiresrii,m1idev1i,,mliidevlii,E36

that means each person, belonging to the ith class, during the predefined period of time consumes k1i,,kriunits of resources res1i,,resriiand is using m1i,,mliidevices dev1i,,devlii, respectively.

From here, it is evident that the same assignment of the consumed resources and used devices must be done regarding all positions, having placed in structures, described by UR (30)(32). Relevant unitary rules are similar to (36):

pstnk1res1,,krresr,m1dev1,,mldevl,E37

or

pstnk1res1,,krresrE38

(the latter retains possibility of “deviceless” positions). All devices, represented by multiobjects, having placed in the body of UR (37), are in private use of a person; holding this position, for all time this person is assigned to this position (i.e., these devices are not of multiple access and are not the property of the person).

Let us take into account that every MATS, as well as every device, used by the person also consumes resources, necessary for its operation. To represent this obstacle, it is sufficient to use URs like

techk1res1,,ktrest,E39

regarding “terminal” MATS and subsystems of “non-terminal” MATS, which are not decomposed during STS description. Similar URs define resources, consumed by devices:

devk1res1,,kdresd.E40

Let us denote SHunitary multiset grammar, which title object is socium, and scheme RHcontains all unitary rules, representing considered human segment of STS. By this it is evident that total amount of resources, consumed by this segment during predefined time interval, is V¯SHand, namely, this amount must be produced by the STS industrial segment for STS operation. Since then it is obvious that interconnection and intersection between human and technological segments are formed by URs, defining STS IS:

resk1res1,,kmresm,E41

which means STS IS manufactures one unit of resource resi, consuming during production cycle k1,,kmunits of resources res1,,resm, respectively.

As may be seen, industrial segments of considered STS do not produce nothing but OR, necessary for the existence of humans of this STS, and structures, having placed in (29)(32), are also producing nothing. By this reason any such STS is closed not only in the sense it has no contact with external systems, which may supply it by resources, but also in the sense that it does not produce any OR for mentioned external systems, i.e., does not complete any orders of such systems.

However, it is not difficult to represent STS, which do complete orders of external systems: it is sufficient to join to the body of UR (28) multiobject 1orderand to include to the set RHof unitary rules, representing human segment of STS, UR

ordern1or1,,nmorm,E42

where MS q = {n1or1,,nmorm} is total external order (TEO), which would be completed by STS during the considered time period. Of course, set R would contain unitary rules, representing STS IS capabilities to complete TEO.

Before we shall formulate following statements, let us clarify one important issue, concerning representation of resources, consumed by producing MATS and devices, entering industrial segment of STS. Namely, if MATS/device enter STS IS, it seems that its resource consumption is accounted twice—in RHas well as in RI.

However, there is no any duplication.

RHcontains representation of resources, contained by producing MATS/device during all considered time period independently of amounts of produced by OR. Most often it may be electrical power, consumed for MATS/device maintenance in the state, ready for operation, which is represented by MO nkW(number of consumed kW). In general case, this resource is “readiness” of MATS/device to work, represented by MO 1ready-tech or 1ready-dev. Of course, the same MO must present in the resource base of STS. NHI may eliminate such OR from RB that reflects transfer of MATS/device out of operation, so RB becomes insufficient for STS.

At the same time, URs, representing MATS/device productive capabilities and having placed in the set RI, describe resources, consumed while STS produces OR and necessary, namely, for this operation cycle. Obviously, amounts of resources, consumed while OR production, depend on amounts of produced OR.

As seen from the said, there is no any double count, and both parts of consumed collections of OR are summarized, when their total amounts are obtained.

To unify and to distinguish representation of producing MATS/devices, we shall include the body of any such unitary rule with head x multiobject 1ready-x. Thus, all other MATS/devices, entering set RHand represented by UR without such MO in their bodies, do not enter STS IS.

Now, we may formulate a primary criterion of sufficiency of the resource base of STS during the considered time period. Let TMS vbe the resource base of STS at the beginning of this period, while unitary multigrammars SH=<socium,RH>and SI=<tb,RI>represent human and industrial segments of this STS.

Statement 7. Resource base vis sufficient to STS, if

v¯V¯Sv¯v,E43

where S=<socium,RHRI>.

If vcontains not only terminal but also non-terminal (produced) OR, then sufficiency of this RB may be recognized according to (25), if to suppose q=1socium. Not more difficult is generalized criterion of STS sustainability to NHI Δv.

Statement 8. STS, represented by UMG S=<socium,RHRI>, with resource base vis resilient to NHI Δv, if

v¯v¯V¯SqvΔvv¯v¯,E44

where q = {1 socium}. Otherwise, this STS is vulnerable to this NHI. ∎

Example 6. Let sociotechnical system contain human segment, represented by the following set of unitary rules RH:

socium1structures,1persons,
structures1office,1foodfactory,1generationfacility,
office1topmanager,1department,1serverunit,
department1headdpt,3manager,
persons50person,
topmanager1mobphone,1desktop,1lunch,
headdpt1mobphone,1desktop,1lunch,
manager1mobphone,1desktop,1lunch,
person1lunch,
serverunit1hardware,1engineer,
engineer1mobphone,1desktop,1lunch,
foodfactory1factorydirector,1foodline,
foodline1foodcomplex,3foodmaker,
factorydirector1mobphone,1desktop,1lunch,
foodmaker1mobphone,1lunch,
generationfacility1generator,1engineer,
engineer1mobphone,1desktop,1lunch,
generator1readygenerator,
mobphone0.001kW,
desktop0.1kW,
hardware1kW,
foodcomplex1readyfoodcomplex,5kW.

As seen, STS HS contains three structures—office, power generation facility, and food factory—as well as 50 persons out of these structures. Office includes one top manager, three departments, and one MATS—server, providing office operation. Each department, in turn, consists of the head of the department and three managers. The server unit is composed of hardware and an engineer, providing its operation. Every listed position is provided with a mobile phone and desktop, and the person, holding this position, consumes lunch daily. Other structures, entering this socium, are MATS food factory, consisting of a factory director, and food line, producing food, necessary for all humans of the considered socium.

Food line, in turn, is broken down into food complex and three food makers. The factory director is provided with a mobile phone and desktop, while every food maker—with a mobile phone. Every person from the food factory also consumes one lunch. All devices consume electrical energy, in which amounts are multiplicities of OR kW in the bodies of the last four URs. The amount of electrical power, consumed by food complex (5 kW), does not depend on the number of lunches it does produce and is constant for all considered time interval. The third structure is MATS power generation facility, containing a power generator and maintained by an engineer. Generator consumption is described by UR, entering set R and containing MO 1ready-generator, reflecting readiness of a generator to operation.

Let us consider industrial segment of STS, represented by the following set of unitary rules RI:

tb1lunch,
tb1kW.

This means that technological base of STS IS produces two types of OR—lunches and electrical energy. The first contains “something to eat” and “something to drink”. To produce 1 kW, it is necessary to deliver to the generator 0.01 cubic meter of gas:

lunch1luncheat,1lunchdrink,
kW0.01m3gas,
luncheat1cheasecake,
luncheat1sandwich,
lunchdrink1coffee,
lunchdrink1tea,
lunchdrink1juice,
cheasecake100gbread,5gsugar,10gchease,
sandwich100gbread,10gbutter,50gmeat,
tea200gwater,5gsugar,1teacube,
coffee200gwater,5gsugar,1coffeecube,
juice200gfreshjuice.

As may be seen, the total order is

V¯SH={{1readygenerator,1readyfoodcomplex,0.07619m3gas,69lunch}},

while

V¯S={{1readygenerator,1readyfoodcomplex,0.07619m3gas,6900gbread,690gsugar,690gchease,13800gwater,69teacube},{1readygenerator,1readyfoodcomplex,0.07619m3gas,6900gbread,345gsugar,690gchease,13800gfreshjuice},{1readygenerator,1readyfoodcomplex,0.07619m3gas,6900gbread,690gsugar,13800gchease,13800gwater,69coffeecube},{1readygenerator,1readyfoodcomplex,0.07619m3gas,6900gbread,690gbutter,3450gmeat,13800gwater,345gsugar,69teacube},{1readygenerator,1readyfoodcomplex,0.07619m3gas,6900gbread,690gbutter,3450gmeat,13800gfreshjuice},{1readygenerator,1readyfoodcomplex,0.07619m3gas,6900gbread,690gbutter,3450gmeat,13800gwater,345gsugar,69coffeecube}}.
Soifv={1readygenerator,1readyfoodcomplex,1m3gas,10000gbread,1000gsugar,1000gchease,20000gwater,100teacube,15000gfreshjuice,100coffeecube,100teacube,5000gmeat,1000gbutter},

this resource base is sufficient for this STS.

If Δv=0.91m3gas, then the considered STS is resilient to this impact, while in the case Δv=0.91m3gas15000gwater, this STS is vulnerable to the impact. The same result would be, if Δv=1readyfoodcomplex, that means food complex is destructed by the impact.∎

Let us consider now a general case of distributed sociotechnological systems.

5. Resilience of distributed sociotechnological systems

We shall describe distributed STS by application of techniques, considered in Section 2 regarding distributed IS, to local STS, considered in the previous Section 4.

However, we shall minimize the number of multiobjects, extended by geospatial information, by doing this only to those MO, which represent resources. This techniques not only essentially reduces the amount of work, necessary for knowledge base creation, but also excludes the necessity of consideration of rather complicated issues, concerning MATS/device division to producing and nonproducing, as well as implanting associated information to unitary rules, entering set RIand representing producing capabilities of the industrial segment of STS.

If so, all multiobjects like nresin URs, entering both RHand RI, would be replaced by nres/z, where z, as higher, is the name of place (area) where nunits of resource resare (would be) located.

Let us now define the so-called total order (TO), being multiset representation of the aforementioned flow of orders, generated by human segment of DSTS. This total order must be completed by STS IS to provide STS HS after NHI by necessary resources. After that we may apply Statement 8 to TO and UMG RG, which scheme represents technological base of STS IS, reduced by elimination of unitary rules, representing elements of STS IS, which are destroyed by NHI, and to resource base, which, similarly, is reduced by elimination of MO, representing OR, located at places, destroyed by NHI.

We shall introduce the following definition of the aforementioned total order QZ:

QZ=na/zna/zv¯ & v¯V¯H & ¬zZ¯,E45

because it is necessary to produce only those resources, which are consumed at locations, not destroyed by NHI. Here, V¯H=v¯is one-element set of TMS, generated by UMG SH=<socium,RH>(let us remember that all locations of OR are points).

On the other hand, TO would be completed by technological base, also affected (partly destroyed) by the same NHI. The result of this impact may be adequately represented by elimination from the set RIthose unitary rules, in which heads contain affected locations: it is clear that if point of origination of OR is destroyed, no OR is created.

So, TB of STS IS after NHI may be defined as follows:

RZ={a/zn1a1/z1nmam/zma/zn1a1/z1nmam/zmR&¬zZ¯}.E46

Similarly, STS IS resource base after NHI is

vZ=na/zna/zv&¬zZ¯.E47

By this it is easy to formulate criterion of sustainability of distributed sociotechnological system; generalization of (43) is evident.

Statement 9. DSTS, represented by UMG S=<socium,RHRI>,with resource base vis resilient to NHI Z, if

<v¯v¯>V¯SQZvZv¯v¯,E48

where

QZ=<n1a1/z1,,nmam/zm>,E49
SQZ=<q,RZ<qn1a1/z1nmam/zm>}>.E50

Otherwise, this DSTS is vulnerable to this NHI. ∎

As seen, (45)(50) fully correspond to verbal description of this criterion.

Now, it would be reasonable to consider in more details multigrammatical representation of the most significant elements of DSTS IS, usually named critical infrastructures.

6. Multigrammatical representation of critical infrastructures and their interconnections

We shall consider the most important critical infrastructures, which operation is absolutely necessary to provide human segment of DSTS by all required resources and services. Until it is said otherwise, we assume that all elements of these CI are stationary.

Let us begin with electricity infrastructure (EI), containing generation facilities (power plants), transforming/distributing substations (TDS), and terminal units (TU), providing delivery of electrical energy to the consumers. All listed elements are connected by links and joined by transmission networks together into electrical grids, which all together form EI [14, 15, 16].

We shall analyze EI, beginning from terminal units. Any TU in order to deliver one unit of power to the consumer, switched to this TU, must get it from the closest TDS, connected with it by link. So, unitary rule, representing this fragment of EI, would be as follows:

kW/znkW/z,1link/z′′,E51

where z, z, and z′′are, respectively, locations of TU, supplying it TDS, and connecting them link. Here, zand zmay be, as usual, the points, while z′′is the line, represented by coordinates of its basic points (if it is straight, two such points—start and final—are sufficient, and they are, evidently, zand z). Value n>1depends, finally, on losses of power while its transfer by the link; nis a rational number (as higher in Section 4, we use multiobjects with rational multiplicities, which do not change any of definitions, introduced higher for integer case [12, 13]).

If TDS, located at point z, is connected to terminal units, located at points z1,,zm,this fragment of EI is represented by munitary rules:

kW/z1n1kW/z,1link/z1′′,.kW/zmnmkW/z,1link/zm′′.E52

where z1′′,,zm′′are the lines, beginning at zand ending at z1,,zm, respectively.

Similarly, fragments of EI, consisting of connected TDS, may be described. In this case zwould be the location of delivering substation, while z1,,zm—the locations of substations, consuming power from it.

Thus, treelike fragment of EI is described, until zis the location of power plant, generating electrical energy.

Power plant, in turn, may be represented by UR:

kW/zn1res1/z1,,nkresk/zk,E53

where n1,,nkare the amounts of resources res1,,resk, which must be delivered to locations z1,,zk, respectively, in order to generate 1 kW of electrical energy at location z, from which it may be delivered by links to the closest TDS. By this, evidently, z1,,zkare locations of terminal units of other CI, which, in turn, deliver aforementioned resources (energy carriers, EC)—most frequently, natural gas and oil products—transferred to power plants by pipelines, forming fuel infrastructure [6, 7, 8, 9, 17].

Terminal units of the pipeline, which deliver resources to consumers, are represented as heads of unitary rules of the form

res/znkW/z,1link/z,1res/z,E54

where multiobject nkW/zrepresents the TU of electricity infrastructure, providing delivery of one unit of resource resfrom location zto location z. This amount of energy is consumed by pump, executing resource transfer. If there are some losses during such transfer, then MO nres/z, where n>1, would be used in (54) instead of 1res/z.

Distributing facilities of pipelines may be represented similarly to (52):

res/z1n1kW/z,1link/z1,n1res/z1,.res/zmnmkW/z,1link/zm,nkres/zm,E55

which means delivered energy carrier, entering this facility, is distributed to mpipes by application of the corresponding amounts of electrical power. As higher, z1,,zmare the lines, beginning at zand ending at z1,,zm, respectively.

As it is clear, described techniques may be applied in the case of place of origination of EC, i.e., facility, producing various oil derivatives and pipeline gas, used as fuel by power plants. This facility is described as follows:

res/zn1res1/z1,,nkresk/zk,E56

where all multiobjects are interpreted as higher.

The same techniques may be easily applied to water supply [18, 19, 20], heating networks [21, 22, 23], as well as sewage networks [24]. The latter differ from all previous by direction—“generation” of sewage waters is performed by terminal points, and “delivery” is performed to the root of the network, being the outflow point.

As may be seen from this short description, different critical infrastructures contain stationary facilities, producing various resources, as well as intermediate nodes and links, delivering necessary amounts of these resources to terminal units, contacting with objects of another CI, which operation depends on the mentioned amounts.

Let us note that operation of any DSTS is based not only on stationary objects of CI but also on its logistical capabilities—first of all, on mobile component of DSTS, providing relocation of material objects. Thus, sustainability of DSTS in a great degree depends on capabilities of transportation vehicles, which remained in the active state after NHI, as well as of stationary objects of transportation infrastructure, providing motion of these vehicles, as well as of the required resources (first of all, fuels and electrical energy). Such capabilities are necessary for relocation of mentioned objects from places of their creation or storage to places of their consumption.

To represent transportation capabilities of DSTS, we shall use the following techniques. Unitary rule

res/zmwayzz,1res/zE57

means that one unit of resource res may be removed from the place of its storage zto the place of its consumption zby any of ways, which are available by mobile component of technological segment of DSTS. It is important that multiplicity mis the mass of one unit of resource res, measured in some fixed for DSTS units (e.g., kg). According to the techniques of multigrammatical representation of similar problems, proposed in [12, 13], OR wayzzis detailed by unitary rules like

wayzz1z1,l1e/z,E58
z11z2,l2e/z,E59
zk11zk,lke/z,E60
zk1z,lk+1e/z,E61

which describe path from zto z, passing through points z1,,zk, such that distance from zto zkis lk+1km; from zkto zk1lkkm, …; from z2to z1l2km; and from z1to zl1km. As becomes evident, application of unitary rules (57)(61) provides generation of multiset:

1res/zmzKe/z,E62

where

K=mi=1k+1lkE63

is the number of kg-km, which must be removed from point zto point zby the aforementioned mobile segment of DSTS in order to relocate one unit of resource resfrom zto z. If the total order contains multiobject Mres/z, then it is necessary to remove from zto zMKkg km. So if the resource base of DSTS, no matter, before NHI or after it, contains such or more amount of kg-km, this operation is possible; otherwise, it is not.

As seen, the presence of multiobjects like Ke/zin the RB describes the capability of mobile segment of DSTS to relocate resources between its points, no matter what kind of transport is used (trains, trucks, aircrafts, helicopters, ships, etc.). NHI may eliminate some part of such resource, thus reducing transportation capabilities of DSTS. Also, if NHI strikes some points, entering path from zto z, corresponding URs will be extracted from scheme R. So, NHI may destroy transportation segment of DSTS both in topological and resource dimensions.

Of course, there may be different ways of one and the same resource relocation. Representation of any of them begins from UR like (58), which the head is wayzz.

One more issue to be considered here is interconnection of the transportation infrastructure with other CI (first of all, electricity and fuel). This one may be done by including to scheme Runitary rules like

e/z1vel/z,kresmovvel/z,E64

which means relocation of one kg km from place zmay be done by vehicle veland this operation requires kunits of resource, used by this vehicle for motion. If electricity-moved ground transport is used, then (64) becomes

e/z1vel/z,kkW/z,E65

and electricity infrastructure is connected by terminal unit, having placed at z. If petrol-moved ground transport is used, then (65) becomes

e/z1vel/z,klpetrol/z,E66

where multiobject klpetrol/zrepresents the amount of liters of petrol, required for relocation of one kg-km by vehicle vel. Thus, connection of fuel infrastructure to transportation infrastructure is represented.

The same description may be used for aircrafts, helicopters, ships, etc., and such detailing may be done for every concrete vehicle, not only a class of vehicles.

Possibility of non-terminal multiobjects in the resource base of DSTS provides opportunity of representation of such ways of resource relocation, which use different vehicles, moving over one and the same path, and even different vehicles, moving over sequential fragments of the path. Such techniques will be considered in the separate publication, as well as issues, concerning recovery of the vulnerable DSTS.

Some primary results on the assessment of capabilities of vulnerable DSTS are presented in the next section; these results are based on the approach, applied to industrial systems in [2].

7. Assessment of maximal acting subsystem of vulnerable DSTS

Problem, which is considered in this section, is reverse to the previous one and may be formulated as follows.

Let DSTS be vulnerable in the sense of criterion, formulated by Statement 9, i.e., its producing segment and resource base, affected by NHI, are not sufficient for completion of total order, generated by human segment of DSTS.

Question is that what maximal part (subsystem) of DSTS may stay active, being supplied by sufficient amounts of resources, produced by the remained manufacturing facilities and resources. Similar question was for the first time posed in [2], where its objective was to get part of the order, which may be completed by the affected industrial system and its resource base.

Solution of this problem, proposed in [2], is based on application of the so-called dual multiset grammars for generation of orders, which may be completed given the remained resource base.

Let us consider at first local case, which in the simplest form may be described by UMG S=<socium,RHRI>, resource base v, and NHI Δv, which in aggregate do not satisfy generalized criterion, represented by Statement 8.

We shall use MG S1=<vΔv,R1>, where R=RHRI, which is called dual to UMG S.

As may be seen, every terminal multiset vV¯S1in general case may be a join of the following multisets:

  1. n1str1nlstrl, representing integral structures, which may be active after NHI, because they have sufficient amounts of resources for operation

  2. n1pstn1nkpstnk, representing separate positions, entering some structures, which as a whole do not enter the previous set by the reason some of their positions cannot be supplied by all necessary resources

  3. n1person1nppersonp, representing amounts of different types of persons, which may stay alive after NHI, because they would be supplied by necessary resources

  4. n1tech1nstechs, representing amounts of the types of technical systems, which may operate after NHI, because resource base of STS contains all necessary resources for their operation

  5. n1dev1nqdevq, representing amounts of the types of separate devices, which do not enter any technical system from the previous set, but may operate separately because they may be supplied by necessary resources

  6. n1res1ntrest, representing amounts of resources, which would remain in the resource base of STS after all the rest RB would be attached to all previous elements of STS

In general case

V¯S11,E67

so the only TMS, representing the final variant of distribution of the resources, remained in the RB after NHI, would be selected by application of some additional conditions. This task may be easily done by the use of filtering multigrammars (FMG); each FMG S=<v0,R,F>along with kernel v0and scheme Rcontains filter F, joining conditions, which provide selection of terminal multisets, generated by application of rules from scheme R[12, 13].

General case of the distributed STS is not more complicated and may be easily solved by application of the introduced techniques.

8. Conclusion

Proposed multiset-based framework for the assessment of resilience of distributed sociotechnical systems to natural hazards provides flexible and sufficiently easy representation of knowledge about DSTS operation, understood as resource production, relocation, and consumption. Criterial base, introduced in this paper, may be effectively applicable in a posteriori as well as in a priori mode, i.e., for detection of “weak places” in DSTS and their strengthening, not waiting, when NH will occur.

As it was said higher, analytical capabilities of the described framework may be extended by implanting universal time scale into the basic knowledge representation, i.e., into multiset grammars and their various modifications. Such extension would provide full description of dynamics of manufacturing processes, implemented by DSTS in normal state as well as by DSTS, partly destroyed by NHI, and estimation of time periods, necessary for production of various amounts of resources in both cases. This approach makes possible also precise solution of different problems, concerning DSTS recovery [25, 26], on the unified background of resource-based techniques. The main tool for such work is the aforementioned temporal multiset grammars, which will be described in the following publications.

Acknowledgments

The author is grateful to Prof. Fred Roberts and Prof. Don Saari for their useful discussions and to Prof. Alexey Gvishiani for his permanent support.

© 2019 The Author(s). Licensee IntechOpen. This chapter is distributed under the terms of the Creative Commons Attribution 3.0 License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to cite and reference

Link to this chapter Copy to clipboard

Cite this chapter Copy to clipboard

Igor Sheremet (February 1st 2019). Multiset-Based Assessment of Resilience of Sociotechnological Systems to Natural Hazards, Natural Hazards - Risk, Exposure, Response, and Resilience, John P. Tiefenbacher, IntechOpen, DOI: 10.5772/intechopen.83508. Available from:

chapter statistics

149total chapter downloads

More statistics for editors and authors

Login to your personal dashboard for more detailed statistics on your publications.

Access personal reporting

Related Content

This Book

Next chapter

Assessing Seismic Hazard in Chile Using Deep Neural Networks

By Francisco Plaza, Rodrigo Salas and Orietta Nicolis

Related Book

First chapter

Landslide Inventory and Susceptibility Assessment for the Ntchenachena Area, Northern Malawi (East Africa)

By Golden Msilimba

We are IntechOpen, the world's leading publisher of Open Access books. Built by scientists, for scientists. Our readership spans scientists, professors, researchers, librarians, and students, as well as business professionals. We share our knowledge and peer-reveiwed research papers with libraries, scientific and engineering societies, and also work with corporate R&D departments and government entities.

More About Us