Chapters authored
Two‐Phase Inverters with Minimum Switching Devices
The chapter deals with two-phase inverters with minimum switching devices whereby the main emphasis is devoted to ‘minimum switches’ converter topologies and control of passive load as well as split-single-phase induction motor. Such a converter consists of one-leg half-bridge matrix converter and the ac neutral point network as a new type of converter with two phase outputs loading the resistive-inductive or motoric loads. As harmonic content of the voltage of both phases gives very high value of total harmonic distortion (THD), roughly 86%, the current waveforms should be improved by using serial LC filter that brings much more suitable value of THD. Besides, the running capacitor creating needed phase shift (90°) is electronically switched due to varied load. Analysis and modeling of such a new type of single-leg ac/ac converter with two phase outputs are done. The proposed topologies were simulated by Matlab/Simulink and verified in an LT spice environment. Worked-out simulation results are in good agreement with theoretical assumptions and make possible to give recommendation for the fair and right design of the chosen type of converter. Combination of mentioned measures brings a good quality of output quantities of converter and represents the main contribution of the chapter.
Part of the book: Recent Developments on Power Inverters