Abstract
This overview presents computer-based augmented reality (AR) and virtual reality (VR) tools, in-vitro and in-vivo models as useful teaching tools for neurosurgical training, especially in skull-base surgery. An easy set-up and practicable training model for ventricular drainage (VD) is demonstrated. The model allows to evaluate practices, pitfalls and traceability in a virtual but realistic set-up for simulating VD placement. Computer-assisted planning and simulation of skull-base approaches and integration within the daily neurosurgical routine with VR and AR models are discussed for neurosurgical education. A set-up for microvascular training on a plastic rat and a specific vascular anastomosis practice kit with different tube diameters of 1–3 mm of specific plastic vessels for the training of microvascular anastomoses is shown. End-to-end and end-to-side anastomoses were performed with different levels of difficulty, trying to simulate realistic conditions in bypass surgery. Additionally, the teaching strategy of experimental silicone aneurysm clipping in a 3D printed plastic skull and silicone brain model is demonstrated in video sequences. An experimental animal model with microsurgically created bifurcation aneurysms is discussed because this training model for clip occlusion of aneurysms on a living object, still has the greatest relevance to neurosurgical reality.
Keywords
- neurosurgical training
- experimental aneurysms
- microvascular surgery
- experimental surgical models
- microsurgical training and education
- in-vivo neurosurgical models
- in-vitro neurosurgical models
1. Introduction
Today the younger neurosurgical generation has a reduced possibility for practical training in nearly all fields of neurosurgery. Accordingly, neurosurgical training models show increasing popularity. However, skull-base surgery often has a higher level of difficulty and is therefore rarely integrated into the basic surgical training of younger neurosurgeons. Even sophisticated modern, computer-based 3D models cannot adequately replace the important practical and hands-on surgical training. For this reason, we need realistic and gradually coordinated practical scenarios to learn and practice basic neurosurgical skills in sequential steps. Here we present some easy-to-implement practical examples that have proven themselves for operative training in skull-base surgery and for vascular microsurgery.
The number of skull-base procedures as well as microsurgical clipping of cerebral aneurysms is continuously decreasing. Meanwhile, the endovascular treatment of cerebral aneurysms has markedly reduced the number of microsurgical clipping procedures. The result will be a reduced possibility for practical training in aneurysm surgery, especially for the younger generation [1, 2, 3]. Stereotactic radiosurgery on one hand, and the increasing number of patients successfully treated by endovascular techniques on the other hand, will further reduce the overall caseload in skull-base and vascular microsurgery in the next years. However, especially huge, calcified or wide neck aneurysms will remain for microsurgical clip occlusion and will be a challenge for cerebrovascular neurosurgeons in the future. On the other hand, revascularisation and bypass techniques will be more and more in demand [4, 5]. Due to these conditions, concepts and realistic models for practical microsurgical training are necessary to improve the practical skills in neurosurgeons during their training, especially in the field of vascular and skull base surgery [6, 7, 8, 9, 10, 11, 12].
2. Computer-assisted training tools
2.1 Ventricular drainage (VD) model
Various VD training models have been developed, tested and published [13, 14, 15]. Recently, we performed another prospective study to evaluate practices, pitfalls and traceability in a realistic but virtual set-up for simulating ventricular drainage (VD) placement as a practicable training model using our navigation system (Brainlab, Munich, Germany), the navigation pointer functioning as a virtual VD catheter to be placed in the cMRI of a healthy subject (Figure 1). We evaluated accuracy by repeated virtual freehand VD placement on the prone subject using anatomical landmarks by neurosurgeons-in-training and non-neurosurgical staff. The influence of the level of neurosurgical knowledge and training level were of overall interest, especially in narrow ventricles. It was found that accurate VD placement correlated with neurosurgical experience (Figures 2 and 3). These initial results are not yet published, however.
This simple set-up is an easy model for continuous neurosurgical training, with the aim of optimizing the medical care of our patients and constantly improving the level of education. Its set-up could be varied further, for example, as a good training module for simulating an intraoperative emergency puncture of the ventricle, exemplary in an atypical pterional positioning of the head. This poses an unusual situation that requires high surgical skills with an excellent three-dimensional spatial concept.
2.2 Augmented reality (AR) and virtual reality (VR) training tools
Navigation systems offer a multitude of technical options that can be used for training and further education [16, 17]. Brainlab has been offering the function of transparent reflection in a superimposed display of previously segmented anatomical structures for over 20 years (Figure 4). This head-up display, as an early AR tool, in which the pre-planned and segmented structures are faded into the ocular of the operating microscope or onto the screen, allows optimal orientation and is didactically very valuable. However, the accusation is justified that we generally use these technical possibilities of virtual reality or augmented reality, offered as multiplanar visualization or as 3D reconstruction view, far too little for teaching and training purposes [17].
Recently, our department has been working with AR 3D models (UpSurgeOn S.r.l., Milan, Italy) to improve surgical and anatomical skills as well as presurgical positioning of the patient (Figure 5). For this, the department acquired partially reusable 3D models of the most common cranial neurosurgical approaches including certain pathologies (e.g., intracranial aneurysms) (Figures 6–8). The 3D models are made of synthetic materials which render them extremely lifelike in haptics and handling. They can be used as are or in conjunction with an AR app (UpSurgeOn Neurosurgery S.r.l., Milan, Italy), which walks the surgeon through the entire procedure by fusing a virtual image with the actual model, starting with optimal positioning of the patient for the specific surgery (Figures 9–11). The app also allows an image of the patient awaiting the planned procedure to be projected into any space, allowing the surgeon a 360° view. Training sessions were held for neurosurgery residents, offering them the opportunity to practice neurosurgical approaches safely, including craniotomies, drilling with various bits, brain retraction, basic intradural dissection and even aneurysm clip placement. We acquired a navigational data set for one of the models by placing it in a CT-scanner and uploading the data set it into our navigation system (Brainlab, Munich, Germany), thereby giving participants the additional chance to practice the procedure image-guided in a non-bloody and risk-free manner whilst getting more familiar with the navigation system itself (Figure 12). Our results concerning the efficacy of this kind of modern training model have yet to be published; however, anecdotally, residents report feeling more secure in their surgical approaches, in choosing and handling surgical drills as well as in the positioning of patients for surgery. Some residents now use the UpSurgeOn App to plan surgeries in advance or to double-check the preoperative positioning of the patient by overlaying the actual patient with an AR model.
Due to the relative ease and cost-effectiveness of implementing the aforementioned tools, we consider simulation-based cadaver-free training with AR a promising option to bring skull-base surgery training to a new level.
The intense occupation with radiological images, necessary for the segmentation of a tumour or any other lesion and the marking of the anatomical structures, already brings great didactic benefit to the colleagues who are in training. During surgery, the recognition value of the anatomical structures rendered in the CT or MRT as a three-dimensional surgical site under the surgical microscope provides the greatest learning value. The use of navigation data for the dedicated operation planning and the daily discussion of the surgical cases are essential for this. Particularly, in the case of complex skull base operations, the position, craniotomy, microsurgical strategy and resulting operation-specific risks should routinely be discussed with the assistant physicians on the day before the surgical procedure in a pre-op conference. In particular, the discussion of surgery-specific anatomy on the basis of the 3D navigation data provides optimal preparation for these complex neurosurgical interventions [17]. So the following day, the display of the operation-specific anatomical structures via the head-up display during surgery will provide a much higher didactic benefit for complex skull base procedures (Figure 13).
3. In-vitro microsurgical models
Here we present two sophisticated in-vitro artificial plastic models which closely mimic real vascular conditions and a more complex in-vivo experimental animal bifurcation aneurysm model in rabbits [18]. For initial and basic microvascular training, the poly-vinyl-chloride (PVC) rat model (Microsurgical Developments Foundation, Maastricht, The Netherlands) shows itself to be more or less sufficient [19]. For a more realistic haptic feeling and enhanced specific microvascular training, a model with highly elastic polyvinyl alcohol (PVA) vessels and an anatomical plastic head (Kezlex, Ono & Co., Ltd., Tokyo, Japan) is available [18, 20]. Additionally, our highly sophisticated in-vivo experimental animal model (rabbit carotid artery bifurcation model) is demonstrated and discussed [21, 22, 23].
3.1 PVC rat model
Using the PVC rat model for ‘unbloody training’ of microsurgical techniques and improvement of practical skills is a perfect example of the replacement of living animals (Figure 14). The number of live animals used for in-vivo training will likely be reduced in the future, therefore these in-vitro methods will be needed to make the transition to in-vivo models easier. The PVC rat model (Microsurgical Developments Foundation, Maastricht, The Netherlands) should be the first step in the practical education and allow various microsurgical training situations. The replacement of the plastic vessels is easy and relatively cheap [19]. Using a specific nozzle at the back of the rat model, the colored vessels can be filled with water, thus permitting an easy check of patency and quality of the anastomosis.
In the prospective part of our published study [18], end-to-end and end-to-side anastomoses were performed with three different levels of difficulty in the PVC rat model. In total six surgeons with different expertises and different levels of vascular training and surgical skills performed these microsurgical procedures. Different sizes of plastic tubes of various lengths and diameters were used for reduction of the surgical approach and the workspace, to adapt the experimental set-up to a scenario with different degrees of difficulty (Figure 15). Those plastic tubes reduce the operative field and consecutively the surgical working space and determine the trajectory and the direction for the instruments. Due to this focused working channel, the degree of freedom for using the instruments is restricted and therefore, the level of difficulty to perform an adequate anastomosis increases significantly (Figure 15). The different sizes of the plastic tubes mimic intraoperative conditions in a narrow and deep surgical field. Plastic tube I (Advanced) has a diameter of 40 mm and a depth of 15 mm. Tube II (Expert) has a diameter of 30 mm and a depth of 35 mm (Figure 15). Tube III (Master) has a diameter of 25 mm and a depth of 45 mm. For the anastomoses, we used conventional microsurgical instruments and monofile polyamid sutures 8/0 (BV 2 needle), respectively, 10/0 (BV 100-4 needle) Ethilon (Ethicon, Johnson & Johnson MEDICAL GmbH, Norderstedt, Germany).
In this experimental set-up, the increase of surgical complexity by reducing the workspace with the different plastic tubes clearly demonstrates that the time of surgery to perform the anastomosis increased significantly (Figure 15). In addition, the rate of incorrect sutures of the vessel wall increased, the narrower the surgical field became due to the decreasing diameter of the tube. Therefore, the overall patency rate of the anastomosis was clearly reduced with increasing grade of complexity [18].
3.2 PVA vessel with craniotomy site
The wet PVA vessels of the vascular anastomosis practice kit are transparent, highly flexible and soft [20]. However, they have to be kept moist and tend to dry out and lose their elasticity, especially under the high-energy xenon light of the operating microscope. At present, we have used the PVA vessels of the vascular anastomosis practice kit for various experimental anastomoses. Compared to the PVC vessels in the rat model, the preparation and handling of the PVA vessels, especially the grasping with a forceps or the insertion of the needle into the vessel wall is much more realistic and closely mimics human conditions.
An even more realistic scenario is provided by the plastic skull model with relatively soft and deformable silicone brain material and the vascular anastomosis practice kit with highly elastic plastic (PVA) vessels (Kezlex, Ono & Co., Ltd., Tokyo, Japan). The very soft and elastic plastic vessels of the vascular anastomosis practice kit are available in three different diameters: 1 mm, 2 mm and 3 mm. The vascular kit with the humid PVA vessels has a perfect haptic feeling during preparation, cutting and suturing of the vessels. The whole set-up with the deformable plastic brain, the realistic feeling of retraction and especially the optical impression under the microscope generate an overall aspect of a real microsurgical scenario closely mimicking human conditions.
The 3D model with pterional craniotomy and the deformable frontal and temporal lobe (Kezlex, Ono & Co., Ltd., Tokyo, Japan) is a perfect in-vitro model to simulate an opened Sylvian fissure for experimental bypass, as well as aneurysm surgery training.
This set-up allows a realistic retraction of the Sylvian fissure, its handling and preparation closely imitating human conditions (Figure 16).
We also used 3D printed aneurysms made from soft PVA tubing that could be clipped for training purposes. The 3D printed hollow aneurysms were positioned in the depth of the Sylvian fissure and so microsurgical clip application could be simulated adequately (Videos 1 and 2, https://bit.ly/3AeRgNk). Then the experimental plastic aneurysm could be removed from the site to assess the success of the clipping maneuver (Video 3, https://bit.ly/3AeRgNk). These realistic human skull and brain models are relatively expensive but could be used repeatedly [24, 25]. If the models are integrated into practical teaching and training, they help to establish a realistic microsurgical scenario and are definitively superior to computer-based animations alone [26].
4. In-vivo microsurgical models
4.1 Rabbit model for experimental bifurcation aneurysms
The materials and methods of the experimental aneurysm bifurcation model in rabbits (Figure 17) were described in great detail in previous publications [21, 22, 23]. The developed and previously described animal bifurcation aneurysm model is a perfect and highly realistic vivisection model for education and practical training for microsurgical handling and preparation of cerebral vessels. However, this model should be used as a final education tool in an advanced stage of training. The blood flow, the vessel diameter, the haptic feedback, even the induced vasospasms by manipulating too roughly, and the tension of the vessel walls, all of this can be compared to vascular microsurgery in humans (Figures 17 and 18). Therefore, it is an optimal training tool for all cerebrovascular reconstructive surgical procedures and maintains expert status in bypass surgery [27].
Additionally, this experimental aneurysm model allows an optimal practical training of clip application and is a realistic teaching model for optimizing clip occlusion of cerebral aneurysms. As described in the PVC rat model study conditions, the different sizes of plastic tubes were also integrated into our experimental animal model (Figure 18). The tubes were fixed to a conventional and flexible retractor system and could be removed easily if difficulties arise, especially inadvertent bleeding intraoperatively. The transparent plastic tubes create a narrow and deep surgical approach by restricting the angle of view and determining the trajectory of the clip occlusion of the aneurysm as in real aneurysm surgery. After clipping of the experimental bifurcation aneurysm, the plastic tube was removed and the aneurysm could be inspected easily from all sides and the clip position could be checked adequately.
For repeated training, the clip was removed from the experimental aneurysm and the procedure could be repeated, for example, with a narrower, longer or differently angled plastic tube, creating a completely new situation with a different view and access to the experimental bifurcation aneurysm. This high-end in-vitro animal model is an excellent and realistic set-up for intensive practical training and teaching of aneurysm clipping. However, it takes a great deal of logistical and technical effort to produce such an experimental animal aneurysm.
5. Conclusion
VR and AR are currently established in many areas of medical education and should increasingly become the standard in modern neurosurgical advanced teaching and training as well. Therefore, these tools should also be used regularly for surgical training and further education of young neurosurgeons. With modern navigation systems, diverse software and hardware components are generally available and should consequently be used and strictly integrated into our daily clinical routine. This technology thus forms the basis for highly qualified practical training in skull base surgery. In addition, it facilitates the necessary interdisciplinary cooperation between faculties and offers the opportunity for lifelong learning for all surgically active colleagues in skull base surgery.
In-vitro models, like the AR 3D models, the PVC rat model or the PVA vascular model combined with the realistic brain and craniotomy site, allow for a perfect set-up for the advanced training of microsurgery and microvascular anastomoses. The main advantages of these artificial plastic models are their overall availability, the low price and the lack of a specific OR set-up or instruments, compared to training in in-vivo models. The costs and logistical considerations, as well as the ethical and legal aspects involved in maintaining living animals for education and training, make in-vivo models a relatively impractical tool.
These in-vitro models are easily adaptable to the respective circumstances and allow unhindered practical training under almost realistic operating conditions. The surgical complexity with end-to-end and end-to-side anastomoses could be adapted in models and the success rate is easy to check. Parameters like the time of surgery, the rate of incorrect sutures of the vessel wall and the overall patency rate of the anastomoses can be clearly monitored, as well as the learning curve. Therefore, these in-vitro models form the basis for the first step in basic practical training and are a prerequisite for a successful career in vascular neurosurgery and skull base surgery.
In-vivo models should be the last step of practical education. Like our experimental animal model with the insertion of a venous pouch within the microsurgically created arterial bifurcation represents an advanced training model very close to realistic human conditions. In the first step of this model, microvascular anastomoses are trained and secondly, the resulting bifurcation aneurysm is a perfect training tool to learn clip application. Especially, if a plastic tube is positioned over the surgical field and creates a narrow approach with restricted workspace and limited scope for manipulation for the correct clip occlusion of the aneurysm. Our experimental animal model represents a higher level of surgical vascular expertise and additionally is a perfect model to practice bypass surgery, as well as the appropriate handling of clip application and clip occlusion of cerebral aneurysms.
Conflict of interest
The authors have no financial relationship with the organizations mentioned in the paper. All authors declare that they have no conflict of interest.
References
- 1.
Mori K, Yamamoto T, Nakao Y, Esaki TMori K, Yamamoto T, Nakao Y, et al. Development of artificial cranial base model with soft tissues for practical education: Technical note. Neurosurgery. 2010; 66 (6 Suppl Operative):339-341; discussion 341. DOI: 10.1227/01.neu.0000369664.24998.b6 - 2.
Aboud E, Al-Mefty O, Yaşargil MG. New laboratory model for neurosurgical training that simulates live surgery. Journal of Neurosurgery. 2002; 97 (6):1367-1372. DOI: 10.3171/jns.2002.97.6.1367 - 3.
Gailloud P, Pray JR, Muster M, Piotin M, Fasel JH, Rüfenacht DA. An in vitro anatomic model of the human cerebral arteries with saccular arterial aneurysms. Surgical and Radiologic Anatomy. 1997; 19 (2):119-121 - 4.
Gruber A, Bavinszki G, Killer M, Al Shameri A, Richling B. In vitro training model for endovascular embolization of cerebral aneurysms. Minimally Invasive Neurosurgery. 1997; 40 (4):121-123. DOI: 10.1055/s-2008-1053431 - 5.
Senior MA, Southern SJ, Majumder S. Microvascular simulator—a device for micro-anastomosis training. Annals of the Royal College of Surgeons of England. 2001; 83 (5):358-360 - 6.
Colpan ME, Slavin KV, Amin-Hanjani S, Calderon-Arnuphi M, Charbel FT. Microvascular anastomosis training model based on a turkey neck with perfused arteries. Neurosurgery. 2008; 62 (5 Suppl. 2):ONS407-10; discussion ONS410-1. DOI: 10.1227/01.neu.0000326026.01349.75 - 7.
Hicdonmez T, Hamamcioglu MK, Tiryaki M, Cukur Z, Cobanoglu S. Microneurosurgical training model in fresh cadaveric cow brain: A laboratory study simulating the approach to the circle of Willis. Surgical Neurology. 2006; 66 (1):100-104; discussion 104. DOI: 10.1016/j.surneu.2005.09.027 - 8.
Hino A. Training in microvascular surgery using a chicken wing artery. Neurosurgery. 2003; 52 (6):1495-1497; discussion 1497-1498. DOI: 10.1227/01.neu.0000065174.83840.62 - 9.
Olabe J, Olabe J, Roda JM, Sancho V. Human cadaver brain infusion skull model for neurosurgical training. Surgical Neurology International. 2011; 2 :54. DOI: 10.4103/2152-7806.80119. Epub 2011 Apr 28 - 10.
Giovani A, Sandu AM, Petrescu G, Gorgan RM, Goel A. Application of microanastomosis techniques in vascular neurosurgery training and innovation of future surgical strategies for giant aneurysms. World Neurosurgery. 2019; 122 :e1120-e1127. DOI: 10.1016/j.wneu.2018.10.239. Epub 2018 Nov 12 - 11.
Scholz M, Mücke T, Düring MV, Pechlivanis I, Schmieder K, Harders AG. Microsurgically induced aneurysm models in rats, part I: Techniques and histological examination. Minimally Invasive Neurosurgery. 2008; 51 (2):76-82. DOI: 10.1055/s-2008-1058088 - 12.
Tellioglu AT, Eker E, Cimen K, Comert A, Karaeminogullari G, Tekdemir I. Training model for microvascular anastomosis. The Journal of Craniofacial Surgery. 2009; 20 (1):238-239. DOI: 10.1097/SCS.0b013e3181843ade - 13.
Krombach G, Ganser A, Fricke C, Rohde V, Reinges M, Gilsbach J, et al. Virtual placement of frontal ventricular catheters using frameless neuronavigation: An “unbloody training” for young neurosurgeons. Minimally Invasive Neurosurgery. 2000; 43 (4):171-175. DOI: 10.1055/s-2000-11376 - 14.
Perin A, Galbiati TF, Gambatesa E, Ayadi R, Orena EF, Cuomo V, et al. Filling the gap between the OR and virtual simulation: A European study on a basic neurosurgical procedure. Acta Neurochirurgica. 2018; 160 (11):2087-2097. DOI: 10.1007/s00701-018-3676-8. Epub 2018 Oct 1 - 15.
Tai BL, Rooney D, Stephenson F, Liao PS, Sagher O, Shih AJ, et al. Development of a 3D-printed external ventricular drain placement simulator: Technical note. Journal of Neurosurgery. 2015; 123 (4):1070-1076. DOI: 10.3171/2014.12. JNS141867. Epub 2015 Jun 26 - 16.
Spetzger U, Laborde G, Gilsbach JM. Frameless neuronavigation in modern neurosurgery. Minimally Invasive Neurosurgery. 1995; 38 (4):163-166. DOI: 10.1055/s-2008-1053478 - 17.
König A, Spetzger U, editors. Surgery of the Skull Base. Practical Diagnosis and Therapy. Springer International Publishing; 2018. DOI: 10.1007/978-3-319-64018-1 - 18.
Spetzger U, von Schilling A, Brombach T, Winkler G. Training models for vascular microneurosurgery. Acta Neurochirurgica. Supplement. 2011; 112 :115-119. DOI: 10.1007/978-3-7091-0661-7_21 - 19.
Remie R. The PVC-rat and other alternatives in microsurgical training. Lab Animal (NY). 2001; 30 (9):48-52. DOI: 10.1038/5000109 - 20.
Mutoh T, Ishikawa T, Ono H, Yasui N. A new polyvinyl alcohol hydrogel vascular model (KEZLEX) for microvascular anastomosis training. Surgical Neurology International. 2010; 1 :74. DOI: 10.4103/2152-7806.72626 - 21.
Spetzger U, Reul J, Weis J, Bertalanffy H, Thron A, Gilsbach JM. Microsurgically produced bifurcation aneurysms in a rabbit model for endovascular coil embolization. Journal of Neurosurgery. 1996; 85 (3):488-495. DOI: 10.3171/jns.1996.85.3.0488 - 22.
Reul J, Spetzger U, Weis J, Sure U, Gilsbach JM, Thron A. Endovascular occlusion of experimental aneurysms with detachable coils: Influence of packing density and perioperative anticoagulation. Neurosurgery. 1997; 41 (5):1160-1165; discussion 1165-1168. DOI: 10.1097/00006123-199711000-00028 - 23.
Spetzger U, Reul J, Weis J, Bertalanffy H, Gilsbach JM. Endovascular coil embolization of microsurgically produced experimental bifurcation aneurysms in rabbits. Surgical Neurology. 1998; 49 (5):491-494. DOI: 10.1016/s0090-3019(96)00437-5 - 24.
Mashiko T, Kaneko N, Konno T, Otani K, Nagayama R, Watanabe E. Training in cerebral aneurysm clipping using self-made 3-dimensional models. Journal of Surgical Education. 2017; 74 (4):681-689. DOI: 10.1016/j.jsurg.2016.12.010. Epub 2017 Jan 16 - 25.
Błaszczyk M, Jabbar R, Szmyd B, Radek M. 3D printing of rapid, low-cost and patient-specific models of brain vasculature for use in preoperative planning in clipping of intracranial aneurysms. Journal of Clinical Medicine. 2021; 10 (6):1201. DOI: 10.3390/jcm10061201 - 26.
Kimura Y, Mashiko T, Watanabe E, Kawai K. Preoperative simulation of a middle cerebral artery aneurysm clipping using a rotational three-dimensional digital subtraction angiography. Surgical Neurology International. 2021; 12 :70. DOI: 10.25259/SNI_934_2020 - 27.
Tantongtip D, Fratianni A, Jenkner J, Arnold S, Spetzger U. Surgical treatment of inadvertent internal carotid artery lesion by extra-intracranial high-flow bypass. A case report and review of the literature. Journal of Neurological Surgery Reports. 2015; 76 (1):e100-e104. DOI: 10.1055/s-0035-1551670. Epub 2015 May 15