To purchase hard copies of this book, please email:
orders@intechopen.com
By only printing on demand InTech ensures our carbon footprint is kept to a minimum.
The data below shows the environmental impact of printing one single book:
99.28 kg wood
5.34 g CO2
90.14 ml Water
Share this page
Modelling and Simulation
Edited by Giuseppe Petrone and Giuliano Cammarata, ISBN 978-3-902613-25-7, Hard cover, 688 pages, Publisher: I-Tech Education and Publishing, Published: June 01, 2008 under CC BY-NC-SA 3.0 license, in subject Numerical Analysis and Scientific Computing
DOI: 10.5772/79
This book collects original and innovative research studies concerning modeling and simulation of physical systems in a very wide range of applications, encompassing micro-electro-mechanical systems, measurement instrumentations, catalytic reactors, biomechanical applications, biological and chemical sensors, magnetosensitive materials, silicon photonic devices, electronic devices, optical fibers, electro-microfluidic systems, composite materials, fuel cells, indoor air-conditioning systems, active magnetic levitation systems and more. Some of the most recent numerical techniques, as well as some of the software among the most accurate and sophisticated in treating complex systems, are applied in order to exhaustively contribute in knowledge advances.
This book is indexed in:
Book contents
- Chapter 1Braking Process in Automobiles: Investigation of the Thermoelastic Instability Phenomenon
- Chapter 2Modeling and Numerical Investigation of Photoacoustic Resonators
- Chapter 3Multi-Agent Systems for the Simulation of Land Use Change and Policy Interventions
- Chapter 4Pore Scale Simulation of Colloid Deposition
- Chapter 5Practical Application of Simulation Technique for the Resonators Using Piezoelectric Ceramics
- Chapter 6Computation of the Complex Impedance of a Cylindrical Conductor in an Ideal Two-Probe Configuration
- Chapter 7Evolutionary Constructive Approach for Studying Dynamic Complex Systems
- Chapter 8Transient Runaway in a Fixed-Bed Catalytic Reactor
- Chapter 9Carotid Plaque Stresses
- Chapter 10Electromagnetic Flow Metering
- Chapter 11Finite Element Modelling of Micro-cantilevers Used as Chemical Sensors
- Chapter 12Analysis of Electrical Phenomena Occurring in Thermally Assisted Mechanical Dewatering Processes (TAMD)-a Preliminary Study
- Chapter 13Simulation of Plastic Deformation Processes Through a Navier-Stokes Approach
- Chapter 142D Model of a Floating Body Under Nonlinear Waves
- Chapter 15Modelling of Magnetosensitive Elastomers
- Chapter 16Simulation of Net Structures Hydrodynamic Fields
- Chapter 17Modeling and Simulation of Microscale Flows
- Chapter 18Multiphysics Modelling and Simulation in Engineering
- Chapter 19New Methods to Model and Simulate Both Air Exchange and Particle Contamination of Portable Devices
- Chapter 20Recent Advances in Modelling and Simulation of Silicon Photonic Devices
- Chapter 21Numerical Modelling for Thermal Design of Electronic Equipments
- Chapter 22Modelling of Long Period Gratings in Photonic Crystal Fibres and Sensors Based on Them
- Chapter 23A New Methodology for RF MEMS Simulation
- Chapter 24Active Magnetic Suspension and Bearing
- Chapter 25Modeling and Simulation of Piezoelectric Devices
- Chapter 26Multiphysical Modeling of DC and AC Electroosmosis in Micro- and Nanosystems
- Chapter 27Efficient Simulation of Thermal and Electrical Behaviour of Industrial Cables
- Chapter 28Finite Element Simulation of Heat Transfer in Ferrofluid
- Chapter 29Computational Modelling of Mass Transport in Large Arteries
- Chapter 30Modeling of Surface-bed Reactor for Endothermic and Exothermic Reactions Coupling
- Chapter 31Multiscale Heat, Air and Moisture Modelling and Simulation
- Chapter 32Numerical Simulation of Turbulent Air Flows in Aseptic Clean Rooms
- Chapter 33Elastic Modulus FEM Modelling of the Layered Woven Composite Material
- Chapter 34Two-Dimensional PEM Fuel Cells Modeling using COMSOL Multiphysics
