Rodrigo Martins

By António T. Vicente, Andreia Araújo, Diana Gaspar, Lídia Santos, Ana C. Marques, Manuel J. Mendes, Luís Pereira, Elvira Fortunato and Rodrigo Martins

The employment of printing techniques as cost-effective methods to fabricate low cost, flexible, disposable and sustainable solar cells is intimately dependent on the substrate properties and the adequate electronic devices to be powered by them. Among such devices, there is currently a growing interest in the development of user-oriented and multipurpose systems for intelligent packaging or on-site medical diagnostics, which would greatly benefit from printable solar cells as their energy source for autonomous operation.

Part of the book: Nanostructured Solar Cells

By Ana Isabel Bento Rovisco, Rita Branquinho, Joana Vaz Pinto, Rodrigo Martins, Elvira Fortunato and Pedro Barquinha

The massification of Internet of Things (IoT) and Smart Surfaces has increased the demand for nanomaterials excelling at specific properties required for their target application, but also offering multifunctionality, conformal integration in multiple surfaces and sustainability, in line with the European Green Deal goals. Metal oxides have been key materials for this end, finding applications from flexible electronics to photocatalysis and energy harvesting, with multicomponent materials as zinc tin oxide (ZTO) emerging as some of the most promising possibilities. This chapter is dedicated to the hydrothermal synthesis of ZTO nanostructures, expanding the already wide potential of ZnO. A literature review on the latest progress on the synthesis of a multitude of ZTO nanostructures is provided (e.g., nanowires, nanoparticles, nanosheets), emphasizing the relevance of advanced nanoscale techniques for proper characterization of such materials. The multifunctionality of ZTO will also be covered, with special attention being given to their potential for photocatalysis, electronic devices and energy harvesters.

Part of the book: Novel Nanomaterials

By Sofia Henriques Ferreira, Ana Rovisco, Andreia dos Santos, Hugo Águas, Rui Igreja, Pedro Barquinha, Elvira Fortunato and Rodrigo Martins

The ever-growing global market for smart wearable technologies and Internet of Things (IoT) has increased the demand for sustainable and multifunctional nanomaterials synthesized by low-cost and energy-efficient processing technologies. Zinc oxide (ZnO) is a key material for this purpose due to the variety of facile methods that exist to produced ZnO nanostructures with tailored sizes, morphologies, and optical and electrical properties. In particular, ZnO nanostructures with a porous structure are advantageous over other morphologies for many applications because of their high specific surface area. In this chapter, a literature review on the latest progress regarding the synthesis and applications of ZnO with a porous morphology will be provided, with special focus on the synthesis by microwave hydrothermal method of these nanomaterials and their potential for application in energy harvesting devices. Nanogenerators of a composite made by polydimethylsiloxane (PDMS) and porous ZnO nanostructures were explored and optimized, with an output voltage of (4.5 ± 0.3) V being achieved for the best conditions. The daily life applicability of these devices was demonstrated by lighting up a commercial LED, by manually stimulating the nanogenerator directly connected to the LED.

Part of the book: Nanopores