Chapters authored
Design of Advanced Digital Systems Based on High-Speed Optical Links
Part of the book: Optical Fiber Communications and Devices
Design of Digital Advanced Systems Based on Programmable System on Chip
This chapter fills up an advanced analysis of the state-of-the-art design in programmable SoC systems, giving a critical overall vision for every designer to implement real time operating systems and concurrent processing. The content of the chapter is divided in the next four main sections. First the evolution timeline of FPGA based systems is covered from its beginning until the last AP SoC chips. They are complex devices and it is necessary to have a well-known understanding to utilise them in the more efficient form possible. The more important advance digital systems structures and architectures are described. The embedded AP SoCs are analysed and main design methodologies are covered, focusing in hardware and co-design strategies. In this section is described the development of a real open source application that covers the fundamental parts in the design of a SoC system, ranging from the hardware development until the software design involving the embedded operating system and the user interface application. Finally, the system described in the last section is tested in a real scientific experiment and the results are evaluated.
Part of the book: Field
Characterization of Nanocrystalline Cores for EMI Suppression in Cables
Electromagnetic interferences (EMI) can cause different kinds of problems in digital and analog systems, leading to malfunctions, system reboots, or even permanent damage to the system if this is not adequately designed or protected. Nowadays, most electronic products are connected to the main power network or are designed to be interconnected with others through cables. These cable interconnections are becoming more difficult due to the rigid restrictions related to the accomplishment of electromagnetic compatibility (EMC) compliance. When the cables of a system represent an EMI source, it cannot pass the conducted or radiated emissions test. A widely used technique to reduce these problems is applying an EMI suppressor such as a sleeve core. This EMI suppressor provides selective attenuation of undesired interference components that the designer may wish to suppress, and it does not significantly affect the intended signal. This contribution focuses on analyzing different nanocrystalline (NC) EMI suppressors’ performance intended for attenuating interferences in cables. Some NC novel samples are characterized and compare to MnZn and NiZn cores to determine this novel material’s effectiveness compared to the conventional ceramic solutions by analyzing samples with different dimensions.
Part of the book: Materials at the Nanoscale