Surgical techniques to correct the deviated caudal septum.
\r\n\t1. Geopolymers chemistry topic describes the chemical reaction models and chemical kinetic of the geopolymerization which occurs after mixing the aluminosilicate raw materials with an alkaline solution.
\r\n\t2. Advanced characterization of geopolymers topic includes innovative technologies applied on geopolymers characterization at the nanoscale level, meant to explain the bond between the reacted and nonreacted particles from the composition.
\r\n\t3. Sustainability with geopolymers topic should provide clear information about the characteristics and applications of the geopolymers which use as raw materials industrial waste. Moreover, environmental impact studies which offer a clear view of the effects produced by geopolymers manufacturing, compared to conventional materials, is included.
\r\n\t4. Geopolymers as functional materials topic will present key aspects in developing geopolymers with tailored properties that increase further the heavy metals adsorption capacity, offering outstanding opportunities for energy-efficient separations and process intensification, in terms of saving energy, reducing capital costs, minimizing environmental impact and maximizing the raw materials exploitation.
\r\n\t5. Reinforced structures topic describe the effects produced by the introduction, in the geopolymers matrix, of different types of reinforcing elements.
Septoplasty is one of the most frequently operated procedures by rhinologists and facial plastic surgeons. It is performed mainly for reducing nasal obstruction, but it can also provide a better surgical approach in endoscopic sinus and skull base surgery and an easier access for postoperative treatment. The deviated septum can be cartilaginous, bony, or both. The septum can be curved, tilted, angulated, twisted, present with a formation of spurs, or a combination of these. Therefore, there is no a single “standard” or “routine” operation that can satisfy all variables and complexities of cases. Septoplasty is a reconstructive procedure tailor-made for individual cases. Understanding the anatomy and a thorough preoperative evaluation of all deviated sites will lead to a better surgical outcome.
The nasal septum is a vertical midline structure that extends anteriorly to the columella, posteriorly to the sphenoidal rostrum, superiorly to the anterior skull base, and inferiorly to the nasal floor (Figure 1). It composed of soft tissue, cartilage, and bone. The most caudal part between the columella and the caudal margin of the septal cartilage is the membranous septum, lying between the medial crura and the caudal septum. The area of the membranous septum may vary between individuals. In people with a large septal cartilage, the membranous septum might be smaller. The cartilaginous part of the nasal septum is quadrangular. It is in conjunction with the upper lateral cartilage and the lower end of the nasal bone anterosuperiorly, the perpendicular plate of the ethmoid bone superiorly, the vomer bone posteroinferiorly, and the maxillary crest inferiorly. It usually presents with a tail between the gap of the perpendicular plate and the vomer, and this area is actually considered to be the growth center of the septum. The cartilaginous septum connects to the bony septum by a dense fibrous tissue and usually sits in a groove in the maxillary crest. The bony part of the septum includes the vertical crest of the nasal bone, the perpendicular plate of the ethmoid bone, the vomer, the maxillary crest, and the palatine crest. Because the septum at the bony-cartilaginous junction is the growth center of the nasal septum, we should keep in mind not to manipulate vigorously in this area before 17 and 18 years of age.
The anatomy of the nasal septum.
Some important landmarks of the nasal septum should be kept in mind when performing septoplasty to avoid unfavorable complications. The keystone area is the confluence of bone and cartilage at the junction of the nasal bone, the septal cartilage, and the upper lateral cartilages. The detachment of the cartilage from the bone and/or damage of the cartilage in the keystone area may cause a complication known as a saddle nose. Another important landmark is the junction of the caudal septum and the anterior part of the maxillary crest. There are three landmarks in the caudal ends of the septal cartilage: the anterior septal angle, middle septal angle, and posterior septal angle. The posterior septal angle contacts the anterior nasal spine, which is the most anterior part of the maxillary crest. Damage to the fibrous connection between the caudal septum and the anterior nasal spine may lead to weakened support of the nasal tip and an increased risk of nasal tip drooping. Usually, the septal cartilage should be preserved at least one 1–1.5 cm in width dorsally and caudally.
Deviation of the nasal septum can be classified as a caudal septal deviation, dislocation of the cartilage out of the maxillary crest, dorsal and high septal deviation, posterior septal deviation, and a bony spur formation. Various techniques have been proposed to deal with the distinct sites of septal deviation.
Septoplasty can be performed via a traditional headlight approach or by an endoscopic approach. The advantages of using an endoscope are a more accurate diagnosis of septal deviation, better visualization of the contributing factors, prevention of mucosal tears, and visualization of the surgical fields for residents and operating room staff. A systematic review reported that endoscopic septoplasty shortened surgery time and reduced perioperative complications, but the functional result was similar to that with conventional septoplasty [1]. Another systematic review reported that there was a significant improvement in postoperative symptoms (i.e., nasal obstruction and headaches) and fewer complications in patients who underwent endoscopic septoplasty, although these findings should be taken with caution given the poor quality of included studies [2]. Consequently, nowadays, endoscopy has been adopted to perform septoplasty. Many surgical procedures of the nasal septum rely on endoscopes, including septodermoplasty [3, 4], repair of septal perforation [5, 6], and harvesting the nasoseptal flap for skull base reconstruction. The limitation of using endoscopy in septoplasty is correction of the deviated caudal septum. The caudal septal cartilage might be manipulated more easily via a conventional headlight (more details will be described later in this chapter).
Usually, the nose is packed with cotton pledgets soaked with epinephrine 1 mg/ml and 2% lidocaine, followed by a submucoperichondrial injection of 1% lidocaine with 1:100,000 of epinephrine. For better infiltration of the surgical plane and hydrodissection of the subperichondrial and subperiosteal planes, injection into multiple sites of the bilateral septum is performed. For correction of the deviated septum at the junction of the cartilaginous septum and vomer and removal of the bony spur, a Killian incision is made (Figure 2). For correction of the caudal septal deviation, a hemitransfixion incision is made to elevate bilateral mucoperichondrial flaps from the caudal septum and to enable straightening of the caudal septum, to add on a batten graft, and to fix the cartilage firmly on the anterior nasal spine (Figure 2). A #15 scalpel is used to make the incision, and the subperichondrial plane is identified and dissected. When making the hemitransfixion incision, a sharp instrument can be used first (e.g., a scalpel, Cottle, or iris scissors) to elevate the mucoperichondrial flap. After making the Killian incision, the mucoperichondrial flap can be elevated more easily using a scraping maneuver with a Cottle or Freer elevator. Beginning with a correct plane, the elevation of mucoperichondrial flap can proceed more smoothly. After meticulous separation of the septal mucosal flap from the bony-cartilaginous junction, the subperiosteal plane can be identified by advancing a blunt elevator or even using a suction tip underneath the flap. Usually, the bony-cartilaginous junction is where the septum is most deviated. It would be easier to elevate the flap superiorly and inferiorly to the most deviated and adhesive part and then perform the flap dissection from the most deviated part and/or the spur. Sometimes, as flap tears are unavoidable due to large deviated spurs, we may elevate the concave side of the septal flap first to make sure one side of the septal flap is intact.
The incisions in septoplasty. (A) The Kilian incision and the hemitransfixion incision for mucochondrial flap. (B) The septotomy with an adequate preservation of the L-strut. (C) The septotomy made at the bony-cartilaginous junction.
The extent of the incised cartilage depends on the type of septal deviation. For a posterior bony septal deviation or spur formation, the cartilaginous septum may not need to be incised. You can separate the bony-cartilaginous junction during septotomy and enter the contralateral subperiosteal space. Then, the deviated bony septum could be removed precisely using turbinate scissors or through-cutting instruments. For the cartilaginous septal deviation, the septal cartilage may be incised anterior to the deviated part using a Freer septum knife, which can be used to cut the cartilage without injury to the contralateral septal mucosa. If the septal cartilage is to be used as a cartilaginous batten graft for subsequent procedures, it can be harvested using a Freer septum knife as well with an adequate preservation of the L-strut. Then, the contralateral mucoperiosteal flap is elevated, and the deviated bone can be incised using turbinate scissors, through-cutting instruments, or a rongeur.
Dislocation of the cartilage from the maxillary crest, widening of the maxillary crest, and a deviated maxillary crest are common causes of airway obstruction at the base of the nose. Sometimes, it could be left untouched if the problem is minor compared to other deviated problems, but at other times, it can be critical and surgical intervention is required. At the junction of the cartilaginous and bony components of the septum, dense decussating fibers are seen at the confluence of the perichondrium and the periosteum. Therefore, when dissecting the subperichondrial plane downward to the maxillary crest, sharp division of the fibrous connection at the cartilaginous-bony junction using a Freer septum knife is helpful. In case of dislocation of the cartilage from the maxillary crest, it is useful to remove a strip of cartilage lateral to the maxillary crest without destabilizing the junction of the caudal septum and the anterior nasal spine. For wide maxillary crests or the deviated crests, we may use a chisel to shave or smooth the bone surface.
Aggressive resections of the cartilaginous portion of the septum may lead to loss of nasal tip support. However, inadequate correction of the caudal septal deviation is one of the main reasons for persistent septal deviation after primary septoplasty [7]. The caudal septum is mainly composed of the cartilaginous portion of the septum, and the relationship between the caudal septum and the anterior nasal spine is crucial in the management of caudal septum deviation. In addition, after correcting the curvature of the cartilage and adjusting the relative position of the caudal septum and the anterior nasal spine, the structures need to be strengthened using sutures and/or batten grafts (Table 1).
To straighten the caudal septum | To strengthen the caudal septum |
---|---|
|
|
Surgical techniques to correct the deviated caudal septum.
Correction of cartilage is different from correction of bone. Once the bony septum is fractured to be straight, the structure is broken, and it seldom recovers to the original shape. However, the elastic coiling nature of the cartilage renders it with a “memory,” which leads to cartilage re-bending even after suture or scoring. To overcome the intrinsic elasticity of the cartilage, Jang et al. proposed a cutting and suture technique [8]. The most convex part of the caudal cartilage is cut while preserving the junction between the cartilaginous septum and the maxillary crest, and then the two segments are sutured side by side with a slight overlap. If the stability of the cut and sutured septum is questionable, a cartilaginous batten graft can be used to provide further support.
The structure of the caudal septum corrected by the cutting and suture technique can also be strengthened with an interpositioned graft [9]. Another way to break the intrinsic elasticity is to make an incomplete incision on the most concave site of the cartilaginous septum (Figure 3A). Then, a pair of forceps can be used to reposition the cartilage to the midline, and the excess piece of cartilage can be trimmed (Figure 3B and C). The septum can be sutured with a 5-0 PDS, and a batten graft can be used.
Correction of the caudal cartilaginous curvature. (A) Making an incomplete incision on the most concave site of the cartilaginous septum. (B) Estimating the overlapping cartilage by repositioning the cartilage to the midline. (C) Trimming of the excess cartilage.
Dislocation of the lower part of the caudal septum on the side of the maxillary crest can narrow the airway and cause nasal obstruction, and this can be managed in several ways. As mentioned before, the cartilage along the maxillary crest could be shaved as a strip, but the stability of caudal septum may be affected due to loss of the fibrous connections between the cartilage and bone. Therefore, in addition to shaving the base of the cartilaginous septum, anchoring sutures between the cartilage and the soft tissue around the nasal crest can be used to strengthen the stability. Another solution to correct cartilaginous septal deviation is to disarticulate the cartilage from the maxillary crest, and the excessive cartilage can then be resected. Following this, the caudal cartilaginous septum could be replaced in the midline or fixed on the other side, and stabilizing sutures can be used.
While the above techniques are used to correct the curvature of the septal cartilage, additional batten grafts are used to strengthen and stabilize the structure and maintain a longstanding straightened caudal septum. The batten grafts can provide a strong support to overcome the internal coiling strength of the deviated cartilage and also prevent possible nasal tip drooping due to aggressive septation of the bony-cartilaginous junction. The batten grafts can be taken from either the cartilaginous septum [10, 11] or the perpendicular plate of the ethmoid bone [12, 13, 14], and it can be performed endonasally. The bony grafts do not cause internal nasal valve obstruction, and the cartilage grafts can be beveled to avoid excessive thickness of the caudal septum.
A reassessment of the nasal airway can be performed after completing the above procedures, and any minor adjustments can be addressed. Then, the septal flap is reapproximated. The hemitransfixion or Kilian incision is closed with simple interrupted 4-0 chromic sutures. The septum can be closed with a through-and-through quilting 4-0 chromic suture, which eliminates dead space and prevents development of septal hematoma. If mucosal tears are present, the silastic splints can be placed at each side of the nasal cavity and removed in 5–7 days.
Septoplasty is an individualized procedure, and preoperative evaluation of the deviated site is critical to achieve optimal outcome. Endoscope can provide better visualization of the deviated sites and prevention of mucosal tears, while the deviated caudal septum could be managed via hemitransfixion incision under headlight. Combining the use of headlight and endoscope can deal with most of the deviated sites of the nasal septum, and therefore, septoplasty could be performed endonasally in most of the cases. Open septoplasty may be indicated in cases with deviated or crooked nose, and septoplasty with rhinoplasty can be performed. The surgical intention is to make a straight septum with long-lasting effect.
The authors declare no conflict of interest.
nasal septum
septoplasty
endoscopic septoplasty
caudal septal deviation
Kilian incision
hemitransfixion incision
IntechOpen aims to guarantee that original material is published while at the same time giving significant freedom to our Authors. We uphold a flexible Copyright Policy, guaranteeing that there is no transfer of copyright to the publisher and Authors retain exclusive copyright to their Work.
',metaTitle:"Publication Agreement - Monograph",metaDescription:"IntechOpen aims to guarantee that original material is published while at the same time giving significant freedom to our authors. For that matter, we uphold a flexible copyright policy meaning that there is no transfer of copyright to the publisher and authors retain exclusive copyright to their work.",metaKeywords:null,canonicalURL:"/page/publication-agreement-monograph",contentRaw:'[{"type":"htmlEditorComponent","content":"When submitting a manuscript, the Author is required to accept the Terms and Conditions set out in our Publication Agreement – Monographs/Compacts as follows:
\\n\\nCORRESPONDING AUTHOR'S GRANT OF RIGHTS
\\n\\nSubject to the following Article, the Author grants to IntechOpen, during the full term of copyright, and any extensions or renewals of that term, the following:
\\n\\nThe foregoing licenses shall survive the expiry or termination of this Publication Agreement for any reason.
\\n\\nThe Author, on his or her own behalf and on behalf of any of the Co-Authors, reserves the following rights in the Work but agrees not to exercise them in such a way as to adversely affect IntechOpen's ability to utilize the full benefit of this Publication Agreement: (i) reprographic rights worldwide, other than those which subsist in the typographical arrangement of the Work as published by IntechOpen; and (ii) public lending rights arising under the Public Lending Right Act 1979, as amended from time to time, and any similar rights arising in any part of the world.
\\n\\nThe Author, and any Co-Author, confirms that they are, and will remain, a member of any applicable licensing and collecting society and any successor to that body responsible for administering royalties for the reprographic reproduction of copyright works.
\\n\\nSubject to the license granted above, copyright in the Work and all versions of it created during IntechOpen's editing process, including all published versions, is retained by the Author and any Co-Authors.
\\n\\nSubject to the license granted above, the Author and Co-Authors retain patent, trademark and other intellectual property rights to the Work.
\\n\\nAll rights granted to IntechOpen in this Article are assignable, sublicensable or otherwise transferrable to third parties without the specific approval of the Author or Co-Authors.
\\n\\nThe Author, on his/her own behalf and on behalf of the Co-Authors, will not assert any rights under the Copyright, Designs and Patents Act 1988 to object to derogatory treatment of the Work as a consequence of IntechOpen's changes to the Work arising from the translation of it, corrections and edits for house style, removal of problematic material and other reasonable edits as determined by IntechOpen.
\\n\\nAUTHOR'S DUTIES
\\n\\nWhen distributing or re-publishing the Work, the Author agrees to credit the Monograph/Compacts as the source of first publication, as well as IntechOpen. The Author guarantees that Co-Authors will also credit the Monograph/Compacts as the source of first publication, as well as IntechOpen, when they are distributing or re-publishing the Work.
\\n\\nThe Author agrees to:
\\n\\nThe Author will be held responsible for the payment of the agreed Open Access Publishing Fee before the completion of the project (Monograph/Compacts publication).
\\n\\nAll payments shall be due 30 days from the date of issue of the invoice. The Author or whoever is paying on behalf of the Author and Co-Authors will bear all banking and similar charges incurred.
\\n\\nThe Author shall obtain in writing all consents necessary for the reproduction of any material in which a third-party right exists, including quotations, photographs and illustrations, in all editions of the Work worldwide for the full term of the above licenses, and shall provide to IntechOpen, at its request, the original copies of such consents for inspection or the photocopies of such consents.
\\n\\nThe Author shall obtain written informed consent for publication from those who might recognize themselves or be identified by others, for example from case reports or photographs.
\\n\\nThe Author shall respect confidentiality during and after the termination of this Agreement. The information contained in all correspondence and documents as part of the publishing activity between IntechOpen and the Author and Co-Authors are confidential and are intended only for the recipients. The contents of any communication may not be disclosed publicly and are not intended for unauthorized use or distribution. Any use, disclosure, copying, or distribution is prohibited and may be unlawful.
\\n\\nAUTHOR'S WARRANTY
\\n\\nThe Author and Co-Authors confirm and warrant that the Work does not and will not breach any applicable law or the rights of any third party and, specifically, that the Work contains no matter that is defamatory or that infringes any literary or proprietary rights, intellectual property rights, or any rights of privacy.
\\n\\nThe Author and Co-Authors confirm that: (i) the Work is their original work and is not copied wholly or substantially from any other work or material or any other source; (ii) the Work has not been formally published in any other peer-reviewed journal or in a book or edited collection, and is not under consideration for any such publication; (iii) Authors and any applicable Co-Authors are qualifying persons under section 154 of the Copyright, Designs and Patents Act 1988; (iv) Authors and any applicable Co-Authors have not assigned, and will not during the term of this Publication Agreement purport to assign, any of the rights granted to IntechOpen under this Publication Agreement; and (v) the rights granted by this Publication Agreement are free from any security interest, option, mortgage, charge or lien.
\\n\\nThe Author and Co-Authors also confirm and warrant that: (i) he/she has the power to enter into this Publication Agreement on his or her own behalf and on behalf of each Co-Author; and (ii) has the necessary rights and/or title in and to the Work to grant IntechOpen, on behalf of themselves and any Co-Author, the rights and licences in this Publication Agreement. If the Work was prepared jointly by the Author and Co-Authors, the Author confirms that: (i) all Co-Authors agree to the submission, license and publication of the Work on the terms of this Publication Agreement; and (ii) the Author has the authority to enter into this biding Publication Agreement on behalf of each Co-Author. The Author shall: (i) ensure each Co-Author complies with all relevant provisions of this Publication Agreement, including those relating to confidentiality, performance and standards, as if a party to this Publication Agreement; and (ii) remain primarily liable for all acts and/or omissions of each Co-Author.
\\n\\nThe Author agrees to indemnify IntechOpen harmless against all liabilities, costs, expenses, damages and losses, as well as all reasonable legal costs and expenses suffered or incurred by IntechOpen arising out of, or in connection with, any breach of the agreed confirmations and warranties. This indemnity shall not apply in a situation in which a claim results from IntechOpen's negligence or willful misconduct.
\\n\\nNothing in this Publication Agreement shall have the effect of excluding or limiting any liability for death or personal injury caused by negligence or any other liability that cannot be excluded or limited by applicable law.
\\n\\nTERMINATION
\\n\\nIntechOpen has the right to terminate this Publication Agreement for quality, program, technical or other reasons with immediate effect, including without limitation (i) if the Author and/or any Co-Author commits a material breach of this Publication Agreement; (ii) if the Author and/or any Co-Author (being a private individual) is the subject of a bankruptcy petition, application or order; or (iii) if the Author and/or any Co-Author (as a corporate entity) commences negotiations with all or any class of its creditors with a view to rescheduling any of its debts, or makes a proposal for, or enters into, any compromise or arrangement with any of its creditors.
\\n\\nIn the event of termination, IntechOpen will notify the Author of the decision in writing.
\\n\\nIntechOpen’s DUTIES AND RIGHTS
\\n\\nUnless prevented from doing so by events beyond its reasonable control, IntechOpen, at its discretion, agrees to publish the Work attributing it to the Author and Co-Authors.
\\n\\nUnless prevented from doing so by events beyond its reasonable control, IntechOpen agrees to provide publishing services which include: managing editing (editorial and publishing process coordination, Author assistance); publishing software technology; language copyediting; typesetting; online publishing; hosting and web management; and abstracting and indexing services.
\\n\\nIntechOpen agrees to offer free online access to readers and use reasonable efforts to promote the Publication to relevant audiences.
\\n\\nIntechOpen is granted the authority to enforce the rights from this Publication Agreement on behalf of the Author and Co-Authors against third parties, for example in cases of plagiarism or copyright infringements. In respect of any such infringement or suspected infringement of the copyright in the Work, IntechOpen shall have absolute discretion in addressing any such infringement that is likely to affect IntechOpen's rights under this Publication Agreement, including issuing and conducting proceedings against the suspected infringer.
\\n\\nIntechOpen has the right to include/use the Author and Co-Authors names and likeness in connection with scientific dissemination, retrieval, archiving, web hosting and promotion and marketing of the Work and has the right to contact the Author and Co-Authors until the Work is publicly available on any platform owned and/or operated by IntechOpen.
\\n\\nMISCELLANEOUS
\\n\\nFurther Assurance: The Author shall ensure that any relevant third party, including any Co-Author, shall execute and deliver whatever further documents or deeds and perform such acts as IntechOpen reasonably requires from time to time for the purpose of giving IntechOpen the full benefit of the provisions of this Publication Agreement.
\\n\\nThird Party Rights: A person who is not a party to this Publication Agreement may not enforce any of its provisions under the Contracts (Rights of Third Parties) Act 1999.
\\n\\nEntire Agreement: This Publication Agreement constitutes the entire agreement between the parties in relation to its subject matter. It replaces all prior agreements, draft agreements, arrangements, collateral warranties, collateral contracts, statements, assurances, representations and undertakings of any nature made by, or on behalf of, the parties, whether oral or written, in relation to that subject matter. Each party acknowledges that in entering into this Publication Agreement it has not relied upon any oral or written statements, collateral or other warranties, assurances, representations or undertakings which were made by or on behalf of the other party in relation to the subject matter of this Publication Agreement at any time before its signature (known as the "Pre-Contractual Statements"), other than those which are set out in this Publication Agreement. Each party hereby waives all rights and remedies which might otherwise be available to it in relation to such Pre-Contractual Statements. Nothing in this clause shall exclude or restrict the liability of either party arising out of any fraudulent pre-contract misrepresentation or concealment.
\\n\\nWaiver: No failure or delay by a party to exercise any right or remedy provided under this Publication Agreement or by law shall constitute a waiver of that or any other right or remedy, nor shall it preclude or restrict the further exercise of that or any other right or remedy. No single or partial exercise of such right or remedy shall preclude or restrict the further exercise of that or any other right or remedy.
\\n\\nVariation: No variation of this Publication Agreement shall have effect unless it is in writing and signed by the parties, or their duly authorized representatives.
\\n\\nSeverance: If any provision, or part-provision, of this Publication Agreement is, or becomes invalid, illegal or unenforceable, it shall be deemed modified to the minimum extent necessary to make it valid, legal and enforceable. If such modification is not possible, the relevant provision or part-provision shall be deemed deleted. Any modification to, or deletion of, a provision or part-provision under this clause shall not affect the validity and enforceability of the rest of this Publication Agreement.
\\n\\nNo partnership: Nothing in this Publication Agreement is intended to, or shall be deemed to, establish or create any partnership or joint venture or the relationship of principal and agent or employer and employee between IntechOpen and the Author or any Co-Author, nor authorize any party to make or enter into any commitments for, or on behalf of, any other party.
\\n\\nGoverning law: This Publication Agreement and any dispute or claim, including non-contractual disputes or claims arising out of, or in connection with it, or its subject matter or formation, shall be governed by and construed in accordance with the law of England and Wales. The parties submit to the exclusive jurisdiction of the English courts to settle any dispute or claim arising out of, or in connection with, this Publication Agreement, including any non-contractual disputes or claims.
\\n\\nPolicy last updated: 2018-09-11
\\n"}]'},components:[{type:"htmlEditorComponent",content:'When submitting a manuscript, the Author is required to accept the Terms and Conditions set out in our Publication Agreement – Monographs/Compacts as follows:
\n\nCORRESPONDING AUTHOR'S GRANT OF RIGHTS
\n\nSubject to the following Article, the Author grants to IntechOpen, during the full term of copyright, and any extensions or renewals of that term, the following:
\n\nThe foregoing licenses shall survive the expiry or termination of this Publication Agreement for any reason.
\n\nThe Author, on his or her own behalf and on behalf of any of the Co-Authors, reserves the following rights in the Work but agrees not to exercise them in such a way as to adversely affect IntechOpen's ability to utilize the full benefit of this Publication Agreement: (i) reprographic rights worldwide, other than those which subsist in the typographical arrangement of the Work as published by IntechOpen; and (ii) public lending rights arising under the Public Lending Right Act 1979, as amended from time to time, and any similar rights arising in any part of the world.
\n\nThe Author, and any Co-Author, confirms that they are, and will remain, a member of any applicable licensing and collecting society and any successor to that body responsible for administering royalties for the reprographic reproduction of copyright works.
\n\nSubject to the license granted above, copyright in the Work and all versions of it created during IntechOpen's editing process, including all published versions, is retained by the Author and any Co-Authors.
\n\nSubject to the license granted above, the Author and Co-Authors retain patent, trademark and other intellectual property rights to the Work.
\n\nAll rights granted to IntechOpen in this Article are assignable, sublicensable or otherwise transferrable to third parties without the specific approval of the Author or Co-Authors.
\n\nThe Author, on his/her own behalf and on behalf of the Co-Authors, will not assert any rights under the Copyright, Designs and Patents Act 1988 to object to derogatory treatment of the Work as a consequence of IntechOpen's changes to the Work arising from the translation of it, corrections and edits for house style, removal of problematic material and other reasonable edits as determined by IntechOpen.
\n\nAUTHOR'S DUTIES
\n\nWhen distributing or re-publishing the Work, the Author agrees to credit the Monograph/Compacts as the source of first publication, as well as IntechOpen. The Author guarantees that Co-Authors will also credit the Monograph/Compacts as the source of first publication, as well as IntechOpen, when they are distributing or re-publishing the Work.
\n\nThe Author agrees to:
\n\nThe Author will be held responsible for the payment of the agreed Open Access Publishing Fee before the completion of the project (Monograph/Compacts publication).
\n\nAll payments shall be due 30 days from the date of issue of the invoice. The Author or whoever is paying on behalf of the Author and Co-Authors will bear all banking and similar charges incurred.
\n\nThe Author shall obtain in writing all consents necessary for the reproduction of any material in which a third-party right exists, including quotations, photographs and illustrations, in all editions of the Work worldwide for the full term of the above licenses, and shall provide to IntechOpen, at its request, the original copies of such consents for inspection or the photocopies of such consents.
\n\nThe Author shall obtain written informed consent for publication from those who might recognize themselves or be identified by others, for example from case reports or photographs.
\n\nThe Author shall respect confidentiality during and after the termination of this Agreement. The information contained in all correspondence and documents as part of the publishing activity between IntechOpen and the Author and Co-Authors are confidential and are intended only for the recipients. The contents of any communication may not be disclosed publicly and are not intended for unauthorized use or distribution. Any use, disclosure, copying, or distribution is prohibited and may be unlawful.
\n\nAUTHOR'S WARRANTY
\n\nThe Author and Co-Authors confirm and warrant that the Work does not and will not breach any applicable law or the rights of any third party and, specifically, that the Work contains no matter that is defamatory or that infringes any literary or proprietary rights, intellectual property rights, or any rights of privacy.
\n\nThe Author and Co-Authors confirm that: (i) the Work is their original work and is not copied wholly or substantially from any other work or material or any other source; (ii) the Work has not been formally published in any other peer-reviewed journal or in a book or edited collection, and is not under consideration for any such publication; (iii) Authors and any applicable Co-Authors are qualifying persons under section 154 of the Copyright, Designs and Patents Act 1988; (iv) Authors and any applicable Co-Authors have not assigned, and will not during the term of this Publication Agreement purport to assign, any of the rights granted to IntechOpen under this Publication Agreement; and (v) the rights granted by this Publication Agreement are free from any security interest, option, mortgage, charge or lien.
\n\nThe Author and Co-Authors also confirm and warrant that: (i) he/she has the power to enter into this Publication Agreement on his or her own behalf and on behalf of each Co-Author; and (ii) has the necessary rights and/or title in and to the Work to grant IntechOpen, on behalf of themselves and any Co-Author, the rights and licences in this Publication Agreement. If the Work was prepared jointly by the Author and Co-Authors, the Author confirms that: (i) all Co-Authors agree to the submission, license and publication of the Work on the terms of this Publication Agreement; and (ii) the Author has the authority to enter into this biding Publication Agreement on behalf of each Co-Author. The Author shall: (i) ensure each Co-Author complies with all relevant provisions of this Publication Agreement, including those relating to confidentiality, performance and standards, as if a party to this Publication Agreement; and (ii) remain primarily liable for all acts and/or omissions of each Co-Author.
\n\nThe Author agrees to indemnify IntechOpen harmless against all liabilities, costs, expenses, damages and losses, as well as all reasonable legal costs and expenses suffered or incurred by IntechOpen arising out of, or in connection with, any breach of the agreed confirmations and warranties. This indemnity shall not apply in a situation in which a claim results from IntechOpen's negligence or willful misconduct.
\n\nNothing in this Publication Agreement shall have the effect of excluding or limiting any liability for death or personal injury caused by negligence or any other liability that cannot be excluded or limited by applicable law.
\n\nTERMINATION
\n\nIntechOpen has the right to terminate this Publication Agreement for quality, program, technical or other reasons with immediate effect, including without limitation (i) if the Author and/or any Co-Author commits a material breach of this Publication Agreement; (ii) if the Author and/or any Co-Author (being a private individual) is the subject of a bankruptcy petition, application or order; or (iii) if the Author and/or any Co-Author (as a corporate entity) commences negotiations with all or any class of its creditors with a view to rescheduling any of its debts, or makes a proposal for, or enters into, any compromise or arrangement with any of its creditors.
\n\nIn the event of termination, IntechOpen will notify the Author of the decision in writing.
\n\nIntechOpen’s DUTIES AND RIGHTS
\n\nUnless prevented from doing so by events beyond its reasonable control, IntechOpen, at its discretion, agrees to publish the Work attributing it to the Author and Co-Authors.
\n\nUnless prevented from doing so by events beyond its reasonable control, IntechOpen agrees to provide publishing services which include: managing editing (editorial and publishing process coordination, Author assistance); publishing software technology; language copyediting; typesetting; online publishing; hosting and web management; and abstracting and indexing services.
\n\nIntechOpen agrees to offer free online access to readers and use reasonable efforts to promote the Publication to relevant audiences.
\n\nIntechOpen is granted the authority to enforce the rights from this Publication Agreement on behalf of the Author and Co-Authors against third parties, for example in cases of plagiarism or copyright infringements. In respect of any such infringement or suspected infringement of the copyright in the Work, IntechOpen shall have absolute discretion in addressing any such infringement that is likely to affect IntechOpen's rights under this Publication Agreement, including issuing and conducting proceedings against the suspected infringer.
\n\nIntechOpen has the right to include/use the Author and Co-Authors names and likeness in connection with scientific dissemination, retrieval, archiving, web hosting and promotion and marketing of the Work and has the right to contact the Author and Co-Authors until the Work is publicly available on any platform owned and/or operated by IntechOpen.
\n\nMISCELLANEOUS
\n\nFurther Assurance: The Author shall ensure that any relevant third party, including any Co-Author, shall execute and deliver whatever further documents or deeds and perform such acts as IntechOpen reasonably requires from time to time for the purpose of giving IntechOpen the full benefit of the provisions of this Publication Agreement.
\n\nThird Party Rights: A person who is not a party to this Publication Agreement may not enforce any of its provisions under the Contracts (Rights of Third Parties) Act 1999.
\n\nEntire Agreement: This Publication Agreement constitutes the entire agreement between the parties in relation to its subject matter. It replaces all prior agreements, draft agreements, arrangements, collateral warranties, collateral contracts, statements, assurances, representations and undertakings of any nature made by, or on behalf of, the parties, whether oral or written, in relation to that subject matter. Each party acknowledges that in entering into this Publication Agreement it has not relied upon any oral or written statements, collateral or other warranties, assurances, representations or undertakings which were made by or on behalf of the other party in relation to the subject matter of this Publication Agreement at any time before its signature (known as the "Pre-Contractual Statements"), other than those which are set out in this Publication Agreement. Each party hereby waives all rights and remedies which might otherwise be available to it in relation to such Pre-Contractual Statements. Nothing in this clause shall exclude or restrict the liability of either party arising out of any fraudulent pre-contract misrepresentation or concealment.
\n\nWaiver: No failure or delay by a party to exercise any right or remedy provided under this Publication Agreement or by law shall constitute a waiver of that or any other right or remedy, nor shall it preclude or restrict the further exercise of that or any other right or remedy. No single or partial exercise of such right or remedy shall preclude or restrict the further exercise of that or any other right or remedy.
\n\nVariation: No variation of this Publication Agreement shall have effect unless it is in writing and signed by the parties, or their duly authorized representatives.
\n\nSeverance: If any provision, or part-provision, of this Publication Agreement is, or becomes invalid, illegal or unenforceable, it shall be deemed modified to the minimum extent necessary to make it valid, legal and enforceable. If such modification is not possible, the relevant provision or part-provision shall be deemed deleted. Any modification to, or deletion of, a provision or part-provision under this clause shall not affect the validity and enforceability of the rest of this Publication Agreement.
\n\nNo partnership: Nothing in this Publication Agreement is intended to, or shall be deemed to, establish or create any partnership or joint venture or the relationship of principal and agent or employer and employee between IntechOpen and the Author or any Co-Author, nor authorize any party to make or enter into any commitments for, or on behalf of, any other party.
\n\nGoverning law: This Publication Agreement and any dispute or claim, including non-contractual disputes or claims arising out of, or in connection with it, or its subject matter or formation, shall be governed by and construed in accordance with the law of England and Wales. The parties submit to the exclusive jurisdiction of the English courts to settle any dispute or claim arising out of, or in connection with, this Publication Agreement, including any non-contractual disputes or claims.
\n\nPolicy last updated: 2018-09-11
\n'}]},successStories:{items:[]},authorsAndEditors:{filterParams:{sort:"featured,name"},profiles:[{id:"160349",title:null,name:null,middleName:null,surname:null,slug:"",fullName:null,position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"25887",title:"Dr.",name:null,middleName:null,surname:"Abbasi",slug:"abbasi",fullName:"Abbasi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"161332",title:"Dr",name:null,middleName:null,surname:"Abu-El Hassan",slug:"abu-el-hassan",fullName:"Abu-El Hassan",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"212347",title:"Dr.",name:null,middleName:null,surname:"Abubakar",slug:"abubakar",fullName:"Abubakar",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"93806",title:"Dr",name:null,middleName:null,surname:"Adani",slug:"adani",fullName:"Adani",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"158756",title:"Dr",name:null,middleName:null,surname:"Adler",slug:"adler",fullName:"Adler",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"63002",title:"Dr.",name:null,middleName:null,surname:"Agius",slug:"agius",fullName:"Agius",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"34637",title:"Dr.",name:null,middleName:null,surname:"Ahmed",slug:"ahmed",fullName:"Ahmed",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"118228",title:"Dr",name:null,middleName:null,surname:"Ahmed",slug:"ahmed",fullName:"Ahmed",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"89784",title:"Dr",name:null,middleName:null,surname:"Ai",slug:"ai",fullName:"Ai",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"158339",title:"Dr",name:null,middleName:null,surname:"Akahoshi",slug:"akahoshi",fullName:"Akahoshi",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"158540",title:"Dr",name:null,middleName:null,surname:"Al-Jumaily",slug:"al-jumaily",fullName:"Al-Jumaily",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:5698},{group:"region",caption:"Middle and South America",value:2,count:5172},{group:"region",caption:"Africa",value:3,count:1689},{group:"region",caption:"Asia",value:4,count:10243},{group:"region",caption:"Australia and Oceania",value:5,count:888},{group:"region",caption:"Europe",value:6,count:15647}],offset:12,limit:12,total:117315},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{sort:"dateendthirdsteppublish"},books:[],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:9},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:18},{group:"topic",caption:"Business, Management and Economics",value:7,count:2},{group:"topic",caption:"Chemistry",value:8,count:7},{group:"topic",caption:"Computer and Information Science",value:9,count:11},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:5},{group:"topic",caption:"Engineering",value:11,count:15},{group:"topic",caption:"Environmental Sciences",value:12,count:2},{group:"topic",caption:"Immunology and Microbiology",value:13,count:5},{group:"topic",caption:"Materials Science",value:14,count:4},{group:"topic",caption:"Mathematics",value:15,count:1},{group:"topic",caption:"Medicine",value:16,count:60},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:1},{group:"topic",caption:"Neuroscience",value:18,count:1},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:6},{group:"topic",caption:"Physics",value:20,count:2},{group:"topic",caption:"Psychology",value:21,count:3},{group:"topic",caption:"Robotics",value:22,count:1},{group:"topic",caption:"Social Sciences",value:23,count:3},{group:"topic",caption:"Technology",value:24,count:1},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:2}],offset:0,limit:12,total:null},popularBooks:{featuredBooks:[{type:"book",id:"7802",title:"Modern Slavery and Human Trafficking",subtitle:null,isOpenForSubmission:!1,hash:"587a0b7fb765f31cc98de33c6c07c2e0",slug:"modern-slavery-and-human-trafficking",bookSignature:"Jane Reeves",coverURL:"https://cdn.intechopen.com/books/images_new/7802.jpg",editors:[{id:"211328",title:"Prof.",name:"Jane",middleName:null,surname:"Reeves",slug:"jane-reeves",fullName:"Jane Reeves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,isOpenForSubmission:!1,hash:"13aaddf5fdbbc78387e77a7da2388bf6",slug:"animal-reproduction-in-veterinary-medicine",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9961",title:"Data Mining",subtitle:"Methods, Applications and Systems",isOpenForSubmission:!1,hash:"ed79fb6364f2caf464079f94a0387146",slug:"data-mining-methods-applications-and-systems",bookSignature:"Derya Birant",coverURL:"https://cdn.intechopen.com/books/images_new/9961.jpg",editors:[{id:"15609",title:"Dr.",name:"Derya",middleName:null,surname:"Birant",slug:"derya-birant",fullName:"Derya Birant"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9157",title:"Neurodegenerative Diseases",subtitle:"Molecular Mechanisms and Current Therapeutic Approaches",isOpenForSubmission:!1,hash:"bc8be577966ef88735677d7e1e92ed28",slug:"neurodegenerative-diseases-molecular-mechanisms-and-current-therapeutic-approaches",bookSignature:"Nagehan Ersoy Tunalı",coverURL:"https://cdn.intechopen.com/books/images_new/9157.jpg",editors:[{id:"82778",title:"Ph.D.",name:"Nagehan",middleName:null,surname:"Ersoy Tunalı",slug:"nagehan-ersoy-tunali",fullName:"Nagehan Ersoy Tunalı"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8686",title:"Direct Torque Control Strategies of Electrical Machines",subtitle:null,isOpenForSubmission:!1,hash:"b6ad22b14db2b8450228545d3d4f6b1a",slug:"direct-torque-control-strategies-of-electrical-machines",bookSignature:"Fatma Ben Salem",coverURL:"https://cdn.intechopen.com/books/images_new/8686.jpg",editors:[{id:"295623",title:"Associate Prof.",name:"Fatma",middleName:null,surname:"Ben Salem",slug:"fatma-ben-salem",fullName:"Fatma Ben Salem"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7434",title:"Molecular Biotechnology",subtitle:null,isOpenForSubmission:!1,hash:"eceede809920e1ec7ecadd4691ede2ec",slug:"molecular-biotechnology",bookSignature:"Sergey Sedykh",coverURL:"https://cdn.intechopen.com/books/images_new/7434.jpg",editors:[{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",slug:"sergey-sedykh",fullName:"Sergey Sedykh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9839",title:"Outdoor Recreation",subtitle:"Physiological and Psychological Effects on Health",isOpenForSubmission:!1,hash:"5f5a0d64267e32567daffa5b0c6a6972",slug:"outdoor-recreation-physiological-and-psychological-effects-on-health",bookSignature:"Hilde G. Nielsen",coverURL:"https://cdn.intechopen.com/books/images_new/9839.jpg",editors:[{id:"158692",title:"Ph.D.",name:"Hilde G.",middleName:null,surname:"Nielsen",slug:"hilde-g.-nielsen",fullName:"Hilde G. Nielsen"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9208",title:"Welding",subtitle:"Modern Topics",isOpenForSubmission:!1,hash:"7d6be076ccf3a3f8bd2ca52d86d4506b",slug:"welding-modern-topics",bookSignature:"Sadek Crisóstomo Absi Alfaro, Wojciech Borek and Błażej Tomiczek",coverURL:"https://cdn.intechopen.com/books/images_new/9208.jpg",editors:[{id:"65292",title:"Prof.",name:"Sadek Crisostomo Absi",middleName:"C. Absi",surname:"Alfaro",slug:"sadek-crisostomo-absi-alfaro",fullName:"Sadek Crisostomo Absi Alfaro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8697",title:"Virtual Reality and Its Application in Education",subtitle:null,isOpenForSubmission:!1,hash:"ee01b5e387ba0062c6b0d1e9227bda05",slug:"virtual-reality-and-its-application-in-education",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/8697.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:5138},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"9208",title:"Welding",subtitle:"Modern Topics",isOpenForSubmission:!1,hash:"7d6be076ccf3a3f8bd2ca52d86d4506b",slug:"welding-modern-topics",bookSignature:"Sadek Crisóstomo Absi Alfaro, Wojciech Borek and Błażej Tomiczek",coverURL:"https://cdn.intechopen.com/books/images_new/9208.jpg",editors:[{id:"65292",title:"Prof.",name:"Sadek Crisostomo Absi",middleName:"C. Absi",surname:"Alfaro",slug:"sadek-crisostomo-absi-alfaro",fullName:"Sadek Crisostomo Absi Alfaro"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9139",title:"Topics in Primary Care Medicine",subtitle:null,isOpenForSubmission:!1,hash:"ea774a4d4c1179da92a782e0ae9cde92",slug:"topics-in-primary-care-medicine",bookSignature:"Thomas F. Heston",coverURL:"https://cdn.intechopen.com/books/images_new/9139.jpg",editors:[{id:"217926",title:"Dr.",name:"Thomas F.",middleName:null,surname:"Heston",slug:"thomas-f.-heston",fullName:"Thomas F. Heston"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8697",title:"Virtual Reality and Its Application in Education",subtitle:null,isOpenForSubmission:!1,hash:"ee01b5e387ba0062c6b0d1e9227bda05",slug:"virtual-reality-and-its-application-in-education",bookSignature:"Dragan Cvetković",coverURL:"https://cdn.intechopen.com/books/images_new/8697.jpg",editors:[{id:"101330",title:"Dr.",name:"Dragan",middleName:"Mladen",surname:"Cvetković",slug:"dragan-cvetkovic",fullName:"Dragan Cvetković"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9343",title:"Trace Metals in the Environment",subtitle:"New Approaches and Recent Advances",isOpenForSubmission:!1,hash:"ae07e345bc2ce1ebbda9f70c5cd12141",slug:"trace-metals-in-the-environment-new-approaches-and-recent-advances",bookSignature:"Mario Alfonso Murillo-Tovar, Hugo Saldarriaga-Noreña and Agnieszka Saeid",coverURL:"https://cdn.intechopen.com/books/images_new/9343.jpg",editors:[{id:"255959",title:"Dr.",name:"Mario Alfonso",middleName:null,surname:"Murillo-Tovar",slug:"mario-alfonso-murillo-tovar",fullName:"Mario Alfonso Murillo-Tovar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9785",title:"Endometriosis",subtitle:null,isOpenForSubmission:!1,hash:"f457ca61f29cf7e8bc191732c50bb0ce",slug:"endometriosis",bookSignature:"Courtney Marsh",coverURL:"https://cdn.intechopen.com/books/images_new/9785.jpg",editors:[{id:"255491",title:"Dr.",name:"Courtney",middleName:null,surname:"Marsh",slug:"courtney-marsh",fullName:"Courtney Marsh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7831",title:"Sustainability in Urban Planning and Design",subtitle:null,isOpenForSubmission:!1,hash:"c924420492c8c2c9751e178d025f4066",slug:"sustainability-in-urban-planning-and-design",bookSignature:"Amjad Almusaed, Asaad Almssad and Linh Truong - Hong",coverURL:"https://cdn.intechopen.com/books/images_new/7831.jpg",editors:[{id:"110471",title:"Dr.",name:"Amjad",middleName:"Zaki",surname:"Almusaed",slug:"amjad-almusaed",fullName:"Amjad Almusaed"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9376",title:"Contemporary Developments and Perspectives in International Health Security",subtitle:"Volume 1",isOpenForSubmission:!1,hash:"b9a00b84cd04aae458fb1d6c65795601",slug:"contemporary-developments-and-perspectives-in-international-health-security-volume-1",bookSignature:"Stanislaw P. Stawicki, Michael S. Firstenberg, Sagar C. Galwankar, Ricardo Izurieta and Thomas Papadimos",coverURL:"https://cdn.intechopen.com/books/images_new/9376.jpg",editors:[{id:"181694",title:"Dr.",name:"Stanislaw P.",middleName:null,surname:"Stawicki",slug:"stanislaw-p.-stawicki",fullName:"Stanislaw P. Stawicki"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7769",title:"Medical Isotopes",subtitle:null,isOpenForSubmission:!1,hash:"f8d3c5a6c9a42398e56b4e82264753f7",slug:"medical-isotopes",bookSignature:"Syed Ali Raza Naqvi and Muhammad Babar Imrani",coverURL:"https://cdn.intechopen.com/books/images_new/7769.jpg",editors:[{id:"259190",title:"Dr.",name:"Syed Ali Raza",middleName:null,surname:"Naqvi",slug:"syed-ali-raza-naqvi",fullName:"Syed Ali Raza Naqvi"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9279",title:"Concepts, Applications and Emerging Opportunities in Industrial Engineering",subtitle:null,isOpenForSubmission:!1,hash:"9bfa87f9b627a5468b7c1e30b0eea07a",slug:"concepts-applications-and-emerging-opportunities-in-industrial-engineering",bookSignature:"Gary Moynihan",coverURL:"https://cdn.intechopen.com/books/images_new/9279.jpg",editors:[{id:"16974",title:"Dr.",name:"Gary",middleName:null,surname:"Moynihan",slug:"gary-moynihan",fullName:"Gary Moynihan"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7807",title:"A Closer Look at Organizational Culture in Action",subtitle:null,isOpenForSubmission:!1,hash:"05c608b9271cc2bc711f4b28748b247b",slug:"a-closer-look-at-organizational-culture-in-action",bookSignature:"Süleyman Davut Göker",coverURL:"https://cdn.intechopen.com/books/images_new/7807.jpg",editors:[{id:"190035",title:"Associate Prof.",name:"Süleyman Davut",middleName:null,surname:"Göker",slug:"suleyman-davut-goker",fullName:"Süleyman Davut Göker"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"7434",title:"Molecular Biotechnology",subtitle:null,isOpenForSubmission:!1,hash:"eceede809920e1ec7ecadd4691ede2ec",slug:"molecular-biotechnology",bookSignature:"Sergey Sedykh",coverURL:"https://cdn.intechopen.com/books/images_new/7434.jpg",editedByType:"Edited by",editors:[{id:"178316",title:"Ph.D.",name:"Sergey",middleName:null,surname:"Sedykh",slug:"sergey-sedykh",fullName:"Sergey Sedykh"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8545",title:"Animal Reproduction in Veterinary Medicine",subtitle:null,isOpenForSubmission:!1,hash:"13aaddf5fdbbc78387e77a7da2388bf6",slug:"animal-reproduction-in-veterinary-medicine",bookSignature:"Faruk Aral, Rita Payan-Carreira and Miguel Quaresma",coverURL:"https://cdn.intechopen.com/books/images_new/8545.jpg",editedByType:"Edited by",editors:[{id:"25600",title:"Prof.",name:"Faruk",middleName:null,surname:"Aral",slug:"faruk-aral",fullName:"Faruk Aral"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9569",title:"Methods in Molecular Medicine",subtitle:null,isOpenForSubmission:!1,hash:"691d3f3c4ac25a8093414e9b270d2843",slug:"methods-in-molecular-medicine",bookSignature:"Yusuf Tutar",coverURL:"https://cdn.intechopen.com/books/images_new/9569.jpg",editedByType:"Edited by",editors:[{id:"158492",title:"Prof.",name:"Yusuf",middleName:null,surname:"Tutar",slug:"yusuf-tutar",fullName:"Yusuf Tutar"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9839",title:"Outdoor Recreation",subtitle:"Physiological and Psychological Effects on Health",isOpenForSubmission:!1,hash:"5f5a0d64267e32567daffa5b0c6a6972",slug:"outdoor-recreation-physiological-and-psychological-effects-on-health",bookSignature:"Hilde G. Nielsen",coverURL:"https://cdn.intechopen.com/books/images_new/9839.jpg",editedByType:"Edited by",editors:[{id:"158692",title:"Ph.D.",name:"Hilde G.",middleName:null,surname:"Nielsen",slug:"hilde-g.-nielsen",fullName:"Hilde G. Nielsen"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7802",title:"Modern Slavery and Human Trafficking",subtitle:null,isOpenForSubmission:!1,hash:"587a0b7fb765f31cc98de33c6c07c2e0",slug:"modern-slavery-and-human-trafficking",bookSignature:"Jane Reeves",coverURL:"https://cdn.intechopen.com/books/images_new/7802.jpg",editedByType:"Edited by",editors:[{id:"211328",title:"Prof.",name:"Jane",middleName:null,surname:"Reeves",slug:"jane-reeves",fullName:"Jane Reeves"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8063",title:"Food Security in Africa",subtitle:null,isOpenForSubmission:!1,hash:"8cbf3d662b104d19db2efc9d59249efc",slug:"food-security-in-africa",bookSignature:"Barakat Mahmoud",coverURL:"https://cdn.intechopen.com/books/images_new/8063.jpg",editedByType:"Edited by",editors:[{id:"92016",title:"Dr.",name:"Barakat",middleName:null,surname:"Mahmoud",slug:"barakat-mahmoud",fullName:"Barakat Mahmoud"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"10118",title:"Plant Stress Physiology",subtitle:null,isOpenForSubmission:!1,hash:"c68b09d2d2634fc719ae3b9a64a27839",slug:"plant-stress-physiology",bookSignature:"Akbar Hossain",coverURL:"https://cdn.intechopen.com/books/images_new/10118.jpg",editedByType:"Edited by",editors:[{id:"280755",title:"Dr.",name:"Akbar",middleName:null,surname:"Hossain",slug:"akbar-hossain",fullName:"Akbar Hossain"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9157",title:"Neurodegenerative Diseases",subtitle:"Molecular Mechanisms and Current Therapeutic Approaches",isOpenForSubmission:!1,hash:"bc8be577966ef88735677d7e1e92ed28",slug:"neurodegenerative-diseases-molecular-mechanisms-and-current-therapeutic-approaches",bookSignature:"Nagehan Ersoy Tunalı",coverURL:"https://cdn.intechopen.com/books/images_new/9157.jpg",editedByType:"Edited by",editors:[{id:"82778",title:"Ph.D.",name:"Nagehan",middleName:null,surname:"Ersoy Tunalı",slug:"nagehan-ersoy-tunali",fullName:"Nagehan Ersoy Tunalı"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9961",title:"Data Mining",subtitle:"Methods, Applications and Systems",isOpenForSubmission:!1,hash:"ed79fb6364f2caf464079f94a0387146",slug:"data-mining-methods-applications-and-systems",bookSignature:"Derya Birant",coverURL:"https://cdn.intechopen.com/books/images_new/9961.jpg",editedByType:"Edited by",editors:[{id:"15609",title:"Dr.",name:"Derya",middleName:null,surname:"Birant",slug:"derya-birant",fullName:"Derya Birant"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8686",title:"Direct Torque Control Strategies of Electrical Machines",subtitle:null,isOpenForSubmission:!1,hash:"b6ad22b14db2b8450228545d3d4f6b1a",slug:"direct-torque-control-strategies-of-electrical-machines",bookSignature:"Fatma Ben Salem",coverURL:"https://cdn.intechopen.com/books/images_new/8686.jpg",editedByType:"Edited by",editors:[{id:"295623",title:"Associate Prof.",name:"Fatma",middleName:null,surname:"Ben Salem",slug:"fatma-ben-salem",fullName:"Fatma Ben Salem"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"1267",title:"Computer Simulation",slug:"automation-computer-simulation",parent:{title:"Automation",slug:"automation"},numberOfBooks:1,numberOfAuthorsAndEditors:1,numberOfWosCitations:43,numberOfCrossrefCitations:26,numberOfDimensionsCitations:48,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicSlug:"automation-computer-simulation",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"3607",title:"Automation and Robotics",subtitle:null,isOpenForSubmission:!1,hash:null,slug:"automation_and_robotics",bookSignature:"Juan Manuel Ramos Arreguin",coverURL:"https://cdn.intechopen.com/books/images_new/3607.jpg",editedByType:"Edited by",editors:[{id:"6112",title:"Dr.",name:"Juan-Manuel",middleName:null,surname:"Ramos-Arreguin",slug:"juan-manuel-ramos-arreguin",fullName:"Juan-Manuel Ramos-Arreguin"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:1,mostCitedChapters:[{id:"5827",doi:"10.5772/6116",title:"Nonlinear Adaptive Tracking-Control Synthesis for General Linearly Parametrized Systems",slug:"nonlinear_adaptive_tracking-control_synthesis_for_general_linearly_parametrized_systems",totalDownloads:1914,totalCrossrefCites:3,totalDimensionsCites:6,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Zenon Zwierzewicz",authors:null},{id:"5813",doi:"10.5772/6101",title:"Towards an Automated and Optimal Design of Parallel Manipulators",slug:"towards_an_automated_and_optimal_design_of_parallel_manipulators",totalDownloads:2332,totalCrossrefCites:2,totalDimensionsCites:5,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Marwene Nefzi, Martin Riedel and Burkhard Corves",authors:null},{id:"5820",doi:"10.5772/6108",title:"Derivation and Calculation of the Dynamics of Elastic Parallel Manipulators",slug:"derivation_and_calculation_of_the_dynamics_of_elastic_parallel_manipulators",totalDownloads:2829,totalCrossrefCites:3,totalDimensionsCites:5,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Krzysztof Stachera and Walter Schumacher",authors:null}],mostDownloadedChaptersLast30Days:[{id:"5808",title:"Vision Guided Robot Gripping Systems",slug:"vision_guided_robot_gripping_systems",totalDownloads:3548,totalCrossrefCites:1,totalDimensionsCites:2,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Zdzislaw Kowalczuk and Daniel Wesierski",authors:null},{id:"5824",title:"Fuzzy Knowledge Representation Using Probability Measures of Fuzzy Events",slug:"fuzzy_knowledge_representation___using_probability_measures_of_fuzzy_events",totalDownloads:2366,totalCrossrefCites:1,totalDimensionsCites:2,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Anna Walaszek-Babiszewska",authors:null},{id:"5827",title:"Nonlinear Adaptive Tracking-Control Synthesis for General Linearly Parametrized Systems",slug:"nonlinear_adaptive_tracking-control_synthesis_for_general_linearly_parametrized_systems",totalDownloads:1914,totalCrossrefCites:3,totalDimensionsCites:6,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Zenon Zwierzewicz",authors:null},{id:"5816",title:"Pneumatic Fuzzy Controller Simulation vs Practical Results for Flexible Manipulator",slug:"pneumatic_fuzzy_controller_simulation_vs_practical_results_for_flexible_manipulator",totalDownloads:3742,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Juan Manuel Ramos-Arreguin, Jesus Carlos Pedraza-Ortega, Efren Gorrostieta-Hurtado, Rene de Jesus Romero-Troncoso, Jose Emilio Vargas-Soto and Francisco Hernandez-Hernandez",authors:null},{id:"5806",title:"Tracking Control for Multiple Trailer Systems by Adaptive Algorithmic Control",slug:"tracking_control_for_multiple_trailer_systems_by_adaptive_algorithmic_control",totalDownloads:2745,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Tomoaki Kobayashi, Toru Yoshida, Junichi Maenishi, Joe Imae and Guisheng Zhai",authors:null},{id:"5817",title:"Nonlinear Control Strategies for Bioprocesses: Sliding Mode Control versus Vibrational Control",slug:"nonlinear_control_strategies_for_bioprocesses__sliding_mode_control_versus_vibrational_control",totalDownloads:2515,totalCrossrefCites:1,totalDimensionsCites:1,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Dan Selisteanu, Emil Petre, Dorin Popescu and Eugen Bobasu",authors:null},{id:"5815",title:"Linear Lyapunov Cone-Systems",slug:"linear_lyapunov_cone-systems",totalDownloads:2444,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Przemyslaw Przyborowski and Tadeusz Kaczorek",authors:null},{id:"5821",title:"Orthonormal Basis and Radial Basis Functions in Modeling and Identification of Nonlinear Block-Oriented Systems",slug:"orthonormal_basis_and_radial_basis_functions__in_modeling_and_identification_of_nonlinear__block-ori",totalDownloads:2465,totalCrossrefCites:1,totalDimensionsCites:2,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Rafal Stanislawski and Krzysztof J. Latawiec",authors:null},{id:"5818",title:"Sliding Mode Observers for Rotational Robotics Structures",slug:"sliding_mode_observers_for_rotational_robotics_structures",totalDownloads:4266,totalCrossrefCites:1,totalDimensionsCites:2,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Dorin Sendrescu, Dan Selisteanu, Emil Petre and Cosmin Ionete",authors:null},{id:"5825",title:"Multiple Multi-Objective Servo Design - Evolutionary Approach",slug:"multiple_multi-objective_servo_design_-_evolutionary_approach_",totalDownloads:2208,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"automation_and_robotics",title:"Automation and Robotics",fullTitle:"Automation and Robotics"},signatures:"Piotr Wozniak",authors:null}],onlineFirstChaptersFilter:{topicSlug:"automation-computer-simulation",limit:3,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[{type:"book",id:"10176",title:"Microgrids and Local Energy Systems",subtitle:null,isOpenForSubmission:!0,hash:"c32b4a5351a88f263074b0d0ca813a9c",slug:null,bookSignature:"Prof. Nick Jenkins",coverURL:"https://cdn.intechopen.com/books/images_new/10176.jpg",editedByType:null,editors:[{id:"55219",title:"Prof.",name:"Nick",middleName:null,surname:"Jenkins",slug:"nick-jenkins",fullName:"Nick Jenkins"}],equalEditorOne:null,equalEditorTwo:null,equalEditorThree:null,productType:{id:"1",chapterContentType:"chapter"}}],offset:8,limit:8,total:1},route:{name:"profile.detail",path:"/profiles/53181/marius-benta",hash:"",query:{},params:{id:"53181",slug:"marius-benta"},fullPath:"/profiles/53181/marius-benta",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()