I was born in 1967 and graduated from the University of Wollongong-NSW, Australia in December 2002 (M.Eng.Stud, School of Electrical, Computer, and Telecommunication Engineering) and Drs (in Physics in October 1993, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Sumatera Utara-Indonesia). I have taught since 1994
This chapter will discuss 10 subchapters that will make it more detailed and easier for the reader to master and implement them in their project. Before discussing the subchapters in detail the author discusses the wide use of LCD in various equipment that needs display and the superiority of it compared to the conventional existing displays especially in the low energy consumption of it compare to the rest of the displays, then the author ended this general discussion by mentioning the type of LCD known in the market right now (passive matrix and active matrix). After discussing the LCD in general, the author starts discussing the detailed 10 subchapters. The 10 subchapters are 1. 2 × 16 LCD; 2. LCD controller; 3. LCD instructions; 4. LCD initialization; 5. More instructions; 6. LCD initialization subroutine; 7. Displaying a character on the LCD; 8. Displaying more than 1 character on the LCD; 9. A 4-bit mode 2 × 16 LCD module. To give the readers with a succinct overview of important details or interesting information, the author provides the summary of this chapter in subchapter 10. The author also provided the glossary to enable the readers to quickly study the general terms used in this chapter. Finally, the author provides some questions to enable the reader to test their own knowledge of this chapter. The references is also provided to enable the readers to refer to some articles as the sources of this subchapter and to enable them to enrich their knowledge of this chapter.
Part of the book: Liquid Crystals