\r\n\tHigher education is on the brink of major reformation. There is little doubt that higher education has contributed to the development of countries and their competitiveness in a global marketplace as well as informing national policies and driving modernization. However, if higher education is to remain relevant and meet the demands of an ever-changing world, institutions and their operations must progress in unison with the changing world in which they function. Innovations create new or significantly improved ways of operating and may be distinguished by their degree of novelty. Innovation can play a critical role in transforming and advancing practice and therein address socio-economic, organizational, operational and social challenges. The complexity and scope of higher education opens up the possibilities and potential for innovations to transpire in diverse settings and contexts or be embedded in a range of products and services. This book provides the reader with a collection of easy-to-follow vignette-based higher education innovations that have transformed or advanced practice and in doing so contributed to ensuring the relevance and value of higher education in a continuously changing world.
",isbn:null,printIsbn:null,pdfIsbn:null,doi:null,price:0,priceEur:0,priceUsd:0,slug:null,numberOfPages:0,isOpenForSubmission:!1,hash:"9c8b8a6fe8578fbf2398932ce8c1b717",bookSignature:"Associate Prof. Dominique Parrish and Dr. Joanne Joyce-McCoach",publishedDate:null,coverURL:"https://cdn.intechopen.com/books/images_new/8283.jpg",keywords:"Curriculum and Pedagogy, Assessment, Work Integrated Learning, Policy, Organizational Development, Gender Equity, Student Experience, Cultural Awareness, Globalization, Student Exchange, Professionalizing Teaching Practice, Learning Analytics, Online Learning Environments, Blended Learning",numberOfDownloads:1604,numberOfWosCitations:0,numberOfCrossrefCitations:0,numberOfDimensionsCitations:0,numberOfTotalCitations:0,isAvailableForWebshopOrdering:!0,dateEndFirstStepPublish:"May 21st 2018",dateEndSecondStepPublish:"June 11th 2018",dateEndThirdStepPublish:"August 10th 2018",dateEndFourthStepPublish:"October 29th 2018",dateEndFifthStepPublish:"December 28th 2018",remainingDaysToSecondStep:"a year",secondStepPassed:!0,currentStepOfPublishingProcess:5,editedByType:null,kuFlag:!1,editors:[{id:"197795",title:"Associate Prof.",name:"Dominique",middleName:null,surname:"Parrish",slug:"dominique-parrish",fullName:"Dominique Parrish",profilePictureURL:"https://mts.intechopen.com/storage/users/197795/images/system/197795.jpeg",biography:"Associate Professor Dominique Parrish is currently the Associate Dean (Education) in the Faculty of Science, Medicine and Health at the University of Wollongong, Australia. She has over 30 years experience in education and has held numerous leadership roles including project manager of three national learning and teaching grants, external evaluator for two national learning and teaching grants, Treasurer, Vice-President and now President of The Australasian Society for Computers in Learning in Tertiary Education (ASCILITE). Dominique is a Senior Editor of the Journal of University Teaching and Learning Practice (JUTLP) and a member of the Australasian Journal of Educational Technology (AJET) Management Committee. Dominique is currently co-leading the Technology Enhanced Learning Accreditation Scheme (TELAS) initiative, which is seeking to develop a formal process for assessing and accrediting the quality of online learning.",institutionString:"Macquarie University",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"1",totalChapterViews:"0",totalEditedBooks:"0",institution:{name:"University of Wollongong",institutionURL:null,country:{name:"Australia"}}}],coeditorOne:{id:"258929",title:"Dr.",name:"Joanne",middleName:null,surname:"Joyce-McCoach",slug:"joanne-joyce-mccoach",fullName:"Joanne Joyce-McCoach",profilePictureURL:"https://mts.intechopen.com/storage/users/258929/images/system/258929.jpg",biography:"Dr. Joanne Joyce-McCoach is a proficient clinical nurse, with extensive experience in administration and practice and comprehensive knowledge in the area of primary health, community, and general nursing. She has a broad understanding of higher education, programme leadership and curriculum development. Through her appointments and academic studies Joanne has refined her research and teaching skills and gained an excellent understanding of, and commitment to, the development of a challenging and engaging learning environment in which students become life-long scholars and learners. Joanne is an advocate for practice education, focused on the facilitation of student-centered learning, in a productive supportive environment. She has an adept appreciation of issues pertinent to the changing university learning culture and an understanding of student expectations and requirements for their development as effective healthcare professionals.",institutionString:"LaTrobe University",position:null,outsideEditionCount:0,totalCites:0,totalAuthoredChapters:"0",totalChapterViews:"0",totalEditedBooks:"0",institution:null},coeditorTwo:null,coeditorThree:null,coeditorFour:null,coeditorFive:null,topics:[{id:"1316",title:"Higher Education",slug:"higher-education"}],chapters:[{id:"64745",title:"An Integrated Model for Invigorating Innovation and Entrepreneurship in Higher Education",slug:"an-integrated-model-for-invigorating-innovation-and-entrepreneurship-in-higher-education",totalDownloads:216,totalCrossrefCites:0,authors:[null]},{id:"63826",title:"Learning Innovations for Identifying and Developing Talent for University",slug:"learning-innovations-for-identifying-and-developing-talent-for-university",totalDownloads:141,totalCrossrefCites:0,authors:[null]},{id:"64542",title:"Talent Management as a Core Source of Innovation and Social Development in Higher Education",slug:"talent-management-as-a-core-source-of-innovation-and-social-development-in-higher-education",totalDownloads:329,totalCrossrefCites:0,authors:[null]},{id:"65101",title:"Planning for Improvement: Leadership Development among University Administrators",slug:"planning-for-improvement-leadership-development-among-university-administrators",totalDownloads:142,totalCrossrefCites:0,authors:[null]},{id:"65373",title:"Interdisciplinary Engagement in Higher Education: Opportunities Explored",slug:"interdisciplinary-engagement-in-higher-education-opportunities-explored",totalDownloads:159,totalCrossrefCites:0,authors:[null]},{id:"64108",title:"Transformative Teaching of Engineering in Sub-Saharan Africa",slug:"transformative-teaching-of-engineering-in-sub-saharan-africa",totalDownloads:148,totalCrossrefCites:0,authors:[null]},{id:"63117",title:"A Responsive Higher Education Curriculum: Change and Disruptive Innovation",slug:"a-responsive-higher-education-curriculum-change-and-disruptive-innovation",totalDownloads:472,totalCrossrefCites:0,authors:[{id:"96902",title:"Dr.",name:"Maureen",surname:"Snow Andrade",slug:"maureen-snow-andrade",fullName:"Maureen Snow Andrade"}]}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},personalPublishingAssistant:{id:"192910",firstName:"Romina",lastName:"Skomersic",middleName:null,title:"Ms.",imageUrl:"https://mts.intechopen.com/storage/users/192910/images/4743_n.jpg",email:"romina.s@intechopen.com",biography:"As an Author Service Manager my responsibilities include monitoring and facilitating all publishing activities for authors and editors. From chapter submission and review, to approval and revision, copyediting and design, until final publication, I work closely with authors and editors to ensure a simple and easy publishing process. I maintain constant and effective communication with authors, editors and reviewers, which allows for a level of personal support that enables contributors to fully commit and concentrate on the chapters they are writing, editing, or reviewing. I assist authors in the preparation of their full chapter submissions and track important deadlines and ensure they are met. I help to coordinate internal processes such as linguistic review, and monitor the technical aspects of the process. As an ASM I am also involved in the acquisition of editors. Whether that be identifying an exceptional author and proposing an editorship collaboration, or contacting researchers who would like the opportunity to work with IntechOpen, I establish and help manage author and editor acquisition and contact."}},relatedBooks:[{type:"book",id:"1990",title:"International Perspectives of Distance Learning in Higher Education",subtitle:null,isOpenForSubmission:!1,hash:"e9f445b89a42e6221004f529ac247127",slug:"international-perspectives-of-distance-learning-in-higher-education",bookSignature:"Joi L. Moore and Angela D. Benson",coverURL:"https://cdn.intechopen.com/books/images_new/1990.jpg",editedByType:"Edited by",editors:[{id:"102403",title:"Dr.",name:"Joi L.",surname:"Moore",slug:"joi-l.-moore",fullName:"Joi L. Moore"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7804",title:"Teacher Education in the 21st Century",subtitle:null,isOpenForSubmission:!1,hash:"1722e45e6ebd731426bc0e4ac5c6eee2",slug:"teacher-education-in-the-21st-century",bookSignature:"Reginald Botshabeng Monyai",coverURL:"https://cdn.intechopen.com/books/images_new/7804.jpg",editedByType:"Edited by",editors:[{id:"210249",title:"Dr.",name:"Reginald",surname:"Monyai",slug:"reginald-monyai",fullName:"Reginald Monyai"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7576",title:"Reimagining New Approaches in Teacher Professional Development",subtitle:null,isOpenForSubmission:!1,hash:"7ebab0695715a9b2a759da32380ded9a",slug:"reimagining-new-approaches-in-teacher-professional-development",bookSignature:"Vimbi Petrus Mahlangu",coverURL:"https://cdn.intechopen.com/books/images_new/7576.jpg",editedByType:"Edited by",editors:[{id:"196797",title:"Prof.",name:"Vimbi",surname:"Mahlangu",slug:"vimbi-mahlangu",fullName:"Vimbi Mahlangu"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"5773",title:"Global Voices in Higher Education",subtitle:null,isOpenForSubmission:!1,hash:"98977ad0f9bc0a5224a23d6f67b343ca",slug:"global-voices-in-higher-education",bookSignature:"Susan L. Renes",coverURL:"https://cdn.intechopen.com/books/images_new/5773.jpg",editedByType:"Edited by",editors:[{id:"158868",title:"Dr.",name:"Susan",surname:"Renes",slug:"susan-renes",fullName:"Susan Renes"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3161",title:"Frontiers in Guided Wave Optics and Optoelectronics",subtitle:null,isOpenForSubmission:!1,hash:"deb44e9c99f82bbce1083abea743146c",slug:"frontiers-in-guided-wave-optics-and-optoelectronics",bookSignature:"Bishnu Pal",coverURL:"https://cdn.intechopen.com/books/images_new/3161.jpg",editedByType:"Edited by",editors:[{id:"4782",title:"Prof.",name:"Bishnu",surname:"Pal",slug:"bishnu-pal",fullName:"Bishnu Pal"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"72",title:"Ionic Liquids",subtitle:"Theory, Properties, New Approaches",isOpenForSubmission:!1,hash:"d94ffa3cfa10505e3b1d676d46fcd3f5",slug:"ionic-liquids-theory-properties-new-approaches",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/72.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1591",title:"Infrared Spectroscopy",subtitle:"Materials Science, Engineering and Technology",isOpenForSubmission:!1,hash:"99b4b7b71a8caeb693ed762b40b017f4",slug:"infrared-spectroscopy-materials-science-engineering-and-technology",bookSignature:"Theophile Theophanides",coverURL:"https://cdn.intechopen.com/books/images_new/1591.jpg",editedByType:"Edited by",editors:[{id:"37194",title:"Dr.",name:"Theophanides",surname:"Theophile",slug:"theophanides-theophile",fullName:"Theophanides Theophile"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"1373",title:"Ionic Liquids",subtitle:"Applications and Perspectives",isOpenForSubmission:!1,hash:"5e9ae5ae9167cde4b344e499a792c41c",slug:"ionic-liquids-applications-and-perspectives",bookSignature:"Alexander Kokorin",coverURL:"https://cdn.intechopen.com/books/images_new/1373.jpg",editedByType:"Edited by",editors:[{id:"19816",title:"Prof.",name:"Alexander",surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"4816",title:"Face Recognition",subtitle:null,isOpenForSubmission:!1,hash:"146063b5359146b7718ea86bad47c8eb",slug:"face_recognition",bookSignature:"Kresimir Delac and Mislav Grgic",coverURL:"https://cdn.intechopen.com/books/images_new/4816.jpg",editedByType:"Edited by",editors:[{id:"528",title:"Dr.",name:"Kresimir",surname:"Delac",slug:"kresimir-delac",fullName:"Kresimir Delac"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"57",title:"Physics and Applications of Graphene",subtitle:"Experiments",isOpenForSubmission:!1,hash:"0e6622a71cf4f02f45bfdd5691e1189a",slug:"physics-and-applications-of-graphene-experiments",bookSignature:"Sergey Mikhailov",coverURL:"https://cdn.intechopen.com/books/images_new/57.jpg",editedByType:"Edited by",editors:[{id:"16042",title:"Dr.",name:"Sergey",surname:"Mikhailov",slug:"sergey-mikhailov",fullName:"Sergey Mikhailov"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},chapter:{item:{type:"chapter",id:"8526",title:"Video Analysis and Indexing",doi:"10.5772/8039",slug:"video-analysis-and-indexing",body:null,keywords:null,chapterPDFUrl:"https://cdn.intechopen.com/pdfs/8526.pdf",chapterXML:null,downloadPdfUrl:"/chapter/pdf-download/8526",previewPdfUrl:"/chapter/pdf-preview/8526",totalDownloads:1356,totalViews:85,totalCrossrefCites:0,totalDimensionsCites:0,hasAltmetrics:0,dateSubmitted:null,dateReviewed:null,datePrePublished:null,datePublished:"February 1st 2010",readingETA:"0",abstract:null,reviewType:"peer-reviewed",bibtexUrl:"/chapter/bibtex/8526",risUrl:"/chapter/ris/8526",book:{slug:"digital-video"},signatures:"Hui Ding, Wei Pan and Yong Guan",authors:null,sections:null,chapterReferences:null,footnotes:null,contributors:null,corrections:null},book:{id:"3783",title:"Digital Video",subtitle:null,fullTitle:"Digital Video",slug:"digital-video",publishedDate:"February 1st 2010",bookSignature:"Floriano De Rango",coverURL:"https://cdn.intechopen.com/books/images_new/3783.jpg",licenceType:"CC BY-NC-SA 3.0",editedByType:"Edited by",editors:[{id:"3066",title:"Dr.",name:"Floriano",middleName:null,surname:"De Rango",slug:"floriano-de-rango",fullName:"Floriano De Rango"}],productType:{id:"1",title:"Edited Volume",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"8510",title:"Multimedia Traffic over Wireless and Satellite Networks",slug:"multimedia-traffic-over-wireless-and-satellite-networks",totalDownloads:3342,totalCrossrefCites:0,signatures:"Floriano De Rango, Mauro Tropea and Peppino Fazio",authors:[null]},{id:"8511",title:"Adaptive Video Transmission over Wireless MIMO System",slug:"adaptive-video-transmission-over-wireless-mimo-system",totalDownloads:2018,totalCrossrefCites:0,signatures:"Jia-Chyi Wu, Chi-Min Li, and Kuo-Hsean Chen",authors:[null]},{id:"8512",title:"Transmission Optimization of Digital Compressed Video in Wireless Systems",slug:"transmission-optimization-of-digital-compressed-video-in-wireless-systems",totalDownloads:1738,totalCrossrefCites:0,signatures:"Pietro Camarda and Domenico Striccoli",authors:[null]},{id:"8513",title:"Resilient Digital Video Transmission over Wireless Channels using Pixel-Level Artefact Detection Mechanisms",slug:"resilient-digital-video-transmission-over-wireless-channels-using-pixel-level-artefact-detection-mec",totalDownloads:1687,totalCrossrefCites:0,signatures:"Reuben A. Farrugia and Carl James Debono",authors:[null]},{id:"8514",title:"Digital Videos Broadcasting via Satellite – Challenge on IPTV Distribution",slug:"digital-videos-broadcasting-via-satellite-challenge-on-iptv-distribution",totalDownloads:5926,totalCrossrefCites:0,signatures:"I Made Murwantara, Pujianto Yugopuspito, Arnold Aribowo and Samuel Lukas",authors:[null]},{id:"8515",title:"The Deployment of Intelligent Transport Services by using DVB-Based Mobile Video Technologies",slug:"the-deployment-of-intelligent-transport-services-by-using-dvb-based-mobile-video-technologies",totalDownloads:1629,totalCrossrefCites:0,signatures:"Vandenberghe, Leroux, De Turck, Moerman and Demeester",authors:[null]},{id:"8516",title:"A New Waveform based on Linear Precoded Multicarrier Modulation for Future Digital Video Broadcasting Systems",slug:"a-new-waveform-based-on-linear-precoded-multicarrier-modulation-for-future-digital-video-broadcastin",totalDownloads:1567,totalCrossrefCites:0,signatures:"Oudomsack Pierre Pasquero, Matthieu Crussière, Youssef Nasser, Eddy Cholet and Jean-François Hélard",authors:[null]},{id:"8517",title:"Performance Analysis of DVB-T/H OFDM Hierarchical Modulation in Impulse Noise Environment",slug:"performance-analysis-of-dvb-t-h-ofdm-hierarchical-modulation-in-impulse-noise-environment",totalDownloads:2642,totalCrossrefCites:0,signatures:"Tamgnoue Valéry, Véronique Moeyaert, Sébastien Bette and Patrice Mégret",authors:[null]},{id:"8518",title:"IP Datacast and the Cost Effectiveness of its File Repair Mechanism",slug:"ip-datacast-and-the-cost-effectiveness-of-its-file-repair-mechanism",totalDownloads:1689,totalCrossrefCites:0,signatures:"Bernhard Hechenleitner",authors:[null]},{id:"8519",title:"DVB-T2: New Signal Processing Algorithms for a Challenging Digital Video Broadcasting Standard",slug:"dvb-t2-new-signal-processing-algorithms-for-a-challenging-digital-video-broadcasting-standard",totalDownloads:9197,totalCrossrefCites:6,signatures:"Mikel Mendicute, Iker Sobrón, Lorena Martínez and Pello Ochandiano",authors:[null]},{id:"8520",title:"Passive Radar using COFDM (DAB or DVB-T) Broadcasters as Opportunistic Illuminators",slug:"passive-radar-using-cofdm-dab-or-dvb-t-broadcasters-as-opportunistic-illuminators",totalDownloads:4567,totalCrossrefCites:0,signatures:"Poullin Dominique",authors:[null]},{id:"8521",title:"Reliable and Repeatable Power Measurements in DVB-T Systems",slug:"reliable-and-repeatable-power-measurements-in-dvb-t-systems",totalDownloads:2414,totalCrossrefCites:0,signatures:"Leopoldo Angrisani, Domenico Capriglione, Luigi Ferrigno and Gianfranco Miele",authors:[null]},{id:"8522",title:"MidField: An Adaptive Middleware System for Multipoint Digital Video Communication",slug:"midfield-an-adaptive-middleware-system-for-multipoint-digital-video-communication",totalDownloads:2288,totalCrossrefCites:0,signatures:"Koji Hashimoto and Yoshitaka Shibata",authors:[null]},{id:"8523",title:"Video Content Description Using Fuzzy Spatio-Temporal Relations",slug:"video-content-description-using-fuzzy-spatio-temporal-relations",totalDownloads:1294,totalCrossrefCites:0,signatures:"Archana M. Rajurkar, R.C. Joshi, Santanu Chaudhary and Ramchandra Manthalkar",authors:[null]},{id:"8524",title:"Trick play on Audiovisual Information for Tape, Disk and Solid-State based Digital Recording Systems",slug:"trick-play-on-audiovisual-information-for-tape-disk-and-solid-state-based-digital-recording-systems",totalDownloads:2045,totalCrossrefCites:0,signatures:"O. Eerenberg and P.H.N. de With",authors:[null]},{id:"8525",title:"Video Quality Metrics",slug:"video-quality-metrics",totalDownloads:3060,totalCrossrefCites:6,signatures:"Mylène C. Q. Farias",authors:[null]},{id:"8526",title:"Video Analysis and Indexing",slug:"video-analysis-and-indexing",totalDownloads:1356,totalCrossrefCites:0,signatures:"Hui Ding, Wei Pan and Yong Guan",authors:[null]},{id:"8527",title:"Video Editing Based on Situation Awareness from Voice Information and Face Emotion",slug:"video-editing-based-on-situation-awareness-from-voice-information-and-face-emotion",totalDownloads:1483,totalCrossrefCites:2,signatures:"Tetsuya Takiguchi, Jun Adachi and Yasuo Ariki",authors:[null]},{id:"8528",title:"Combined Source and Channel Strategies for Optimized Video Communications",slug:"combined-source-and-channel-strategies-for-optimized-video-communications",totalDownloads:1341,totalCrossrefCites:0,signatures:"François-Xavier Coudoux, Patrick Corlay, Marie Zwingelstein-Colin, Mohamed Gharbi, Charlène Mouton-Goudemand, and Marc-Georges Gazalet",authors:[null]},{id:"8529",title:"Amplitude Phase Shift Keying Constellation Design and its Applications to Satellite Digital Video Broadcasting",slug:"amplitude-phase-shift-keying-constellation-design-and-its-applications-to-satellite-digital-video-br",totalDownloads:9578,totalCrossrefCites:2,signatures:"Konstantinos P. Liolis, Riccardo De Gaudenzi, Nader Alagha, Alfonso Martinez, and Albert Guillén i Fàbregas",authors:[null]},{id:"8530",title:"Non-Photo Realistic Rendering for Digital Video Intaglio",slug:"non-photo-realistic-rendering-for-digital-video-intaglio",totalDownloads:1981,totalCrossrefCites:0,signatures:"Kil-Sang Yoo, Jae-Joon Cho and Ok-Hue Cho",authors:[null]},{id:"8531",title:"Building Principles and Application of Multifunctional Video Information System",slug:"building-principles-and-application-of-multifunctional-video-information-system",totalDownloads:1519,totalCrossrefCites:0,signatures:"Mahmudov Ergash B. and Fedosov Andrew A.",authors:[null]},{id:"8532",title:"Digital Video Image Quality",slug:"digital-video-image-quality",totalDownloads:2845,totalCrossrefCites:0,signatures:"Tomáš Kratochvíl and Martin Slanina",authors:[null]}]},relatedBooks:[{type:"book",id:"2214",title:"Virtual Reality in Psychological, Medical and Pedagogical Applications",subtitle:null,isOpenForSubmission:!1,hash:"28049ab50a2bc84b98a9ec96724c143c",slug:"virtual-reality-in-psychological-medical-and-pedagogical-applications",bookSignature:"Christiane Eichenberg",coverURL:"https://cdn.intechopen.com/books/images_new/2214.jpg",editedByType:"Edited by",editors:[{id:"13468",title:"Dr.",name:"Christiane",surname:"Eichenberg",slug:"christiane-eichenberg",fullName:"Christiane Eichenberg"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"},chapters:[{id:"39042",title:"Being There: Understanding the Feeling of Presence in a Synthetic Environment and its Potential for Clinical Change",slug:"being-there-understanding-the-feeling-of-presence-in-a-synthetic-environment-and-its-potential-for-c",signatures:"Giuseppe Riva and Fabrizia Mantovani",authors:[{id:"149802",title:"Prof.",name:"Giuseppe",middleName:null,surname:"Riva",fullName:"Giuseppe Riva",slug:"giuseppe-riva"},{id:"149803",title:"Prof.",name:"Fabrizia",middleName:null,surname:"Mantovani",fullName:"Fabrizia Mantovani",slug:"fabrizia-mantovani"}]},{id:"39049",title:"Virtual Realities in the Treatment of Mental Disorders: A Review of the Current State of Research",slug:"virtual-realities-in-the-treatment-of-mental-disorders-a-review-of-the-current-state-of-research",signatures:"Christiane Eichenberg and Carolin Wolters",authors:[{id:"13468",title:"Dr.",name:"Christiane",middleName:null,surname:"Eichenberg",fullName:"Christiane Eichenberg",slug:"christiane-eichenberg"},{id:"159051",title:"B.Sc.",name:"Carolin",middleName:null,surname:"Wolters",fullName:"Carolin Wolters",slug:"carolin-wolters"}]},{id:"39048",title:"Games for Health: Have Fun with Virtual Reality!",slug:"games-for-health-have-fun-with-virtual-reality-",signatures:"Birgit U. Stetina, Anna Felnhofer, Oswald D. Kothgassner and Mario Lehenbauer",authors:[{id:"151432",title:"Mr.",name:"Mario",middleName:null,surname:"Lehenbauer",fullName:"Mario Lehenbauer",slug:"mario-lehenbauer"},{id:"151882",title:"M.Sc.",name:"Oswald",middleName:"D.",surname:"Kothgassner",fullName:"Oswald Kothgassner",slug:"oswald-kothgassner"},{id:"158993",title:"Dr.",name:"Birgit",middleName:"U.",surname:"Stetina",fullName:"Birgit Stetina",slug:"birgit-stetina"},{id:"158995",title:"MSc.",name:"Anna",middleName:null,surname:"Felnhofer",fullName:"Anna Felnhofer",slug:"anna-felnhofer"},{id:"162974",title:"Dr.",name:"Birgit U.",middleName:null,surname:"Stetina",fullName:"Birgit U. Stetina",slug:"birgit-u.-stetina"}]},{id:"39044",title:"Description of a Treatment Manual for in virtuo Exposure with Specific Phobia",slug:"description-of-a-treatment-manual-for-in-virtuo-exposure-with-specific-phobia",signatures:"Stephane Bouchard, Geneviève Robillard, Serge Larouche and Claudie Loranger",authors:[{id:"13561",title:"Dr.",name:"Stephane",middleName:".",surname:"Bouchard",fullName:"Stephane Bouchard",slug:"stephane-bouchard"},{id:"146835",title:"MSc.",name:"Geneviève",middleName:null,surname:"Robillard",fullName:"Geneviève Robillard",slug:"genevieve-robillard"},{id:"146836",title:"Ms.",name:"Serge",middleName:null,surname:"Larouche",fullName:"Serge Larouche",slug:"serge-larouche"},{id:"155154",title:"Dr.",name:"Claudie",middleName:null,surname:"Loranger",fullName:"Claudie Loranger",slug:"claudie-loranger"}]},{id:"39041",title:"Virtual Reality and Body Dissatisfaction Across the Eating Disorder’s Spectrum",slug:"virtual-reality-and-body-dissatisfaction-across-the-eating-disorder-s-spectrum",signatures:"Annie Aimé, Karine Cotton, Tanya Guitard and Stéphane Bouchard",authors:[{id:"13561",title:"Dr.",name:"Stephane",middleName:".",surname:"Bouchard",fullName:"Stephane Bouchard",slug:"stephane-bouchard"},{id:"140031",title:"MSc.",name:"Tanya",middleName:null,surname:"Guitard",fullName:"Tanya Guitard",slug:"tanya-guitard"},{id:"146020",title:"Prof.",name:"Annie",middleName:null,surname:"Aime",fullName:"Annie Aime",slug:"annie-aime"},{id:"149018",title:"BSc.",name:"Karine",middleName:null,surname:"Cotton",fullName:"Karine Cotton",slug:"karine-cotton"}]},{id:"39040",title:"A Discussion of the Use of Virtual Reality in Dementia",slug:"a-discussion-of-the-use-of-virtual-reality-in-dementia",signatures:"Linda Garcia, Adi Kartolo and Eric Methot-Curtis",authors:[{id:"146574",title:"Prof.",name:"Linda",middleName:null,surname:"Garcia",fullName:"Linda Garcia",slug:"linda-garcia"},{id:"146576",title:"Mr.",name:"Adi",middleName:null,surname:"Kartolo",fullName:"Adi Kartolo",slug:"adi-kartolo"},{id:"146578",title:"Mr.",name:"Eric",middleName:null,surname:"Methot-Curtis",fullName:"Eric Methot-Curtis",slug:"eric-methot-curtis"}]},{id:"39043",title:"Virtual Reality – A New Era in Surgical Training",slug:"virtual-reality-a-new-era-in-surgical-training",signatures:"C.E. Buckley, E. Nugent, D. Ryan and P.C. Neary",authors:[{id:"37650",title:"Prof.",name:"Paul",middleName:null,surname:"Neary",fullName:"Paul Neary",slug:"paul-neary"},{id:"42530",title:"Dr.",name:"Emmeline",middleName:null,surname:"Nugent",fullName:"Emmeline Nugent",slug:"emmeline-nugent"},{id:"146973",title:"Dr.",name:"Christina",middleName:null,surname:"Buckley",fullName:"Christina Buckley",slug:"christina-buckley"},{id:"153270",title:"Mr.",name:"Donncha",middleName:null,surname:"Ryan",fullName:"Donncha Ryan",slug:"donncha-ryan"}]},{id:"39047",title:"Virtual Reality Simulation: A Valuable Adjunct to Surgical Training",slug:"virtual-reality-simulation-a-valuable-adjunct-to-surgical-training",signatures:"Bernadette McElhinney, Angela Beard, Krishnan Karthigasu and Roger Hart",authors:[{id:"147779",title:"Dr.",name:"Bernie",middleName:null,surname:"McElhinney",fullName:"Bernie McElhinney",slug:"bernie-mcelhinney"},{id:"148010",title:"Dr.",name:"Roger",middleName:null,surname:"Hart",fullName:"Roger Hart",slug:"roger-hart"},{id:"148011",title:"Dr.",name:"Krish",middleName:null,surname:"Karthigasu",fullName:"Krish Karthigasu",slug:"krish-karthigasu"},{id:"148012",title:"Dr.",name:"Angela",middleName:null,surname:"Beard",fullName:"Angela Beard",slug:"angela-beard"}]},{id:"39050",title:"Virtual Rehabilitation and Training for Postural Balance and Neuromuscular Control",slug:"virtual-rehabilitation-and-training-for-postural-balance-and-neuromuscular-control",signatures:"Kristiina Valter McConville",authors:[{id:"16243",title:"Prof.",name:"Kristiina",middleName:null,surname:"Valter McConville",fullName:"Kristiina Valter McConville",slug:"kristiina-valter-mcconville"}]},{id:"39045",title:"Applications of Virtual Reality Technology in Brain Imaging Studies",slug:"applications-of-virtual-reality-technology-in-brain-imaging-studies",signatures:"Ying-hui Chou, Carol P. Weingarten, David J. Madden, Allen W. Song and Nan-kuei Chen",authors:[{id:"144024",title:"Dr.",name:"Ying-Hui",middleName:null,surname:"Chou",fullName:"Ying-Hui Chou",slug:"ying-hui-chou"},{id:"149209",title:"Prof.",name:"Nan-Kuei",middleName:null,surname:"Chen",fullName:"Nan-Kuei Chen",slug:"nan-kuei-chen"},{id:"157434",title:"Prof.",name:"Carol",middleName:null,surname:"Weingarten",fullName:"Carol Weingarten",slug:"carol-weingarten"},{id:"157435",title:"Prof.",name:"David",middleName:null,surname:"Madden",fullName:"David Madden",slug:"david-madden"},{id:"157436",title:"Prof.",name:"Allen",middleName:null,surname:"Song",fullName:"Allen Song",slug:"allen-song"}]},{id:"39054",title:"Cybertherapy in Medicine – Experience at the Universidad Panamericana, IMSS and ISSSTE Mexico",slug:"cybertherapy-in-medicine-experience-at-the-universidad-panamericana-imss-and-issste-mexico",signatures:"José Luis Mosso, Gregorio T. Obrador, Brenda Wiederhold, Mark Wiederhold, Verónica Lara and Amador Santander",authors:[{id:"13436",title:"Prof.",name:"Jose Luis",middleName:null,surname:"Mosso",fullName:"Jose Luis Mosso",slug:"jose-luis-mosso"}]},{id:"39046",title:"Using Augmented Reality Cognitive Artifacts in Education and Virtual Rehabilitation",slug:"using-augmented-reality-cognitive-artifacts-in-education-and-virtual-rehabilitation",signatures:"Claudio Kirner, Christopher Shneider Cerqueira and Tereza Gonçalves Kirner",authors:[{id:"143717",title:"Prof.",name:"Claudio",middleName:null,surname:"Kirner",fullName:"Claudio Kirner",slug:"claudio-kirner"},{id:"148728",title:"Prof.",name:"Tereza",middleName:null,surname:"Kirner",fullName:"Tereza Kirner",slug:"tereza-kirner"},{id:"148729",title:"Mr.",name:"Christopher",middleName:"Shneider",surname:"Cerqueira",fullName:"Christopher Cerqueira",slug:"christopher-cerqueira"}]},{id:"39053",title:"Virtual Environments for Children and Teens",slug:"virtual-environments-for-children-and-teens",signatures:"Jamshid Beheshti",authors:[{id:"143530",title:"Prof.",name:"Jamshid",middleName:null,surname:"Beheshti",fullName:"Jamshid Beheshti",slug:"jamshid-beheshti"}]}]}]},onlineFirst:{chapter:{type:"chapter",id:"61413",title:"Prefabricated Steel-Reinforced Concrete Composite Column",doi:"10.5772/intechopen.77166",slug:"prefabricated-steel-reinforced-concrete-composite-column",body:'\nNowadays, the demand for huge buildings, long-span structures, and skyscrapers has increased. As a result, (1) sectional performance of compressive members, and (2) fast and safe construction method become important. Figure 1(a) shows a conventional concrete-encased steel (CES) composite column using a wide-flange steel section at the center of the cross section. Generally, the wide-flange steel is placed at the center of the cross section, and then longitudinal bars and tie bars are placed in construction site. Thus, the contribution of the steel section to the overall flexural capacity of the column could be limited. Further, the need for rebar and formwork construction requires considerable construction time. Particularly, in mega structures such as semiconductor factory and warehouse using long and large sized columns, fast and safe construction methods are necessary.
\nComparison of CES column and PSRC columns. (a) CES composite column, (b) PSRC composite column (weld connection), (c) PSRC composite column (bolt connection).
In order to improve structural capacity and cost efficiency, a prefabricated steel-reinforced concrete (PSRC) composite column has been used. As shown in Figure 1(b) and (c), the prefabricated steel angles at the four corners replace the conventional wide-flange steel, and the steel angles are weld connected or bolt connected with transverse bars or plates [1, 2, 3, 4, 5]. The weld connection should follow the details prescribed in welding standards [6, 7]. The steel angles resist axial load and flexural moment. The transverse bars and plates provide shear resistance, concrete confinement, and bond resistance between the steel angles and concrete. Because the steel cage of angles and transverse reinforcement are prefabricated off site, field rebar work is unnecessary. Further, the self-erectable steel cage can provide sufficient strength and rigidity to support the construction loads of beams and slabs that are superimposed on the PSRC composite column.
\nFigures 2 and 3 show field application of weld-connected and bolt-connected PSRC composite columns, respectively. Generally, the PSRC composite column with 20 m height and 1.5 m × 1.5 m to 2.0 m × 2.0 m sectional area is used for two- or three-story construction at the same time. In the case of the weld-connected PSRC composite column, the steel cage of angles and transverse reinforcement is moved to construction site, and then concrete form is installed (Figure 2). On the other hand, in the case of the bolt-connected PSRC composite column, concrete form is preattached to the steel cage and it can be permanently used after concrete pouring (Figure 3). Thus, field work related to reinforcing bar placement and concrete form work is excluded, which improves the construction safety and saves the construction time at working in high place.
\nSemiconductor FAB (weld-connected PSRC composite column).
Semiconductor FAB (bolt-connected PSRC composite column).
The prefabricated steel angle composite columns strongly depend on the transverse reinforcement that connects the corner steel angles. The transverse reinforcement provides (1) shear transfer between the steel angles, (2) bond between the steel angles and concrete, (3) buckling resistance for the steel angles, and (4) lateral confinement for the core concrete. To satisfy the requirements of (3) and (4), close spacing as well as sufficient strength are required for the transverse reinforcement. However, the transverse bars welded to steel angles or the transverse plates bolt-connected to steel angles may cause premature tensile fracture of the connection, which should be considered in design.
\nCover concrete provides local buckling resistance and fire resistance for the steel angles. However, when the transverse bars are not closely spaced, the PSRC composite columns are vulnerable to premature spalling of the cover concrete due to smooth surface of steel angles. Particularly, when the columns are subjected to high axial compression force, the load-carrying capacity and deformation capacity of the PSRC composite columns can be degraded by early spalling of the cover concrete. Further, under cyclic lateral loading, the PSRC composite columns are expected to be more susceptible to such damages as the ductility demand increases.
\nThe nominal compressive strengths Pn of a PSRC composite column under concentric axial loading can be evaluated by current design code equations for a concrete-encased steel composite column. For example, AISC 360–10 [8] specifies the nominal compressive strength based on plastic stress and column length effect.
\nwhere Pno = maximum compressive strength of the composite column; Pe = elastic buckling strength of the column; fc’ = concrete strength; Fy and As = yield strength and area of the steel section, respectively; fyr and Asr = yield strength and area of the longitudinal bars, respectively; EIeff = effective flexural stiffness of the composite column; KL = effective buckling length; Es = elastic modulus of steel; Ec = elastic modulus of concrete (= 4700√fc’); Is, Isr, and Ic = second-order moments of inertia of the steel section, reinforcing bar, and concrete, respectively, with respect to the centroid of the column section; and Ac = concrete area.
\nFor better evaluation of the load-carrying capacity of a PSRC composite column, numerical analysis using the stress–strain relationship of confined concrete, unconfined concrete, and steel can be used as shown in Figure 4 [1, 3]. The numerical analysis can be performed using strain compatibility method [9]. The stress–strain relationship of confined and unconfined concrete can be determined from various existing models [10, 11, 12].
\nStress–strain relationships of concrete and steel for numerical analysis.
The nominal compressive strengths Pn of a PSRC composite column under eccentric axial loading can be evaluated by assuming plastic stress distribution of the composite section. In Figure 5(a), performance points A and B indicate pure compressive strength Pno and moment strength Mn, respectively. Performance points C indicates the compressive strength Pnc corresponding to the moment Mn. Performance points D indicates the maximum moment strength corresponding to Pnc/2. Considering the slenderness effect of columns, each performance point should be decreased by multiplying the slenderness reduction factor λ to the compressive strength (where λ = ratio of Pn to Pno). Further, using the strain-compatibility method, P-M interaction diagram can be estimated (Figure 5(b)).
\nSection analysis methods of PSRC column under eccentric axial loading: (a) P-M interaction diagram and (b) strain-compatibility method.
Figure 6 shows the test setup for the concentric axial loading and eccentric axial loading tests. The eccentricity can be controlled using the distance between the column center and loading center. During the test, the load-carrying capacity, axial shortening, and horizontal expansion were measured to evaluate the structural performance of the PSRC composite columns.
\nTest setup of compressive loading tests: (a) concentric axial loading and (b) eccentric axial loading.
Figure 7(a) compares the axial load-strain relationships of a CES and PSRC composite columns using steel ratio of 2.0% under concentric axial compression force [3, 4, 5]. The axial load behavior of the PSRC composite column was similar to that of the CES composite column. The contribution of the steel angles to the lateral confinement increased the peak strength Pu and the deformation capacity in the PSRC composite column. Under concentric axial force, local buckling of the steel angles was not observed. After the peak strengths, significant cracking and subsequent concrete spalling occurred. Particularly, the early spalling can be initiated at the corners of the cross section because of the smooth surface of the angle. Thus, to secure robust axial load behavior of the PSRC composite columns under high axial load, it is recommended that the spacing of transverse reinforcement be decreased to half of the requirement of CES composite columns.
\nAxial load-carrying capacities of CES and PSRC columns: (a) concentric axial loading and (b) eccentric axial loading.
Figure 7(b) compares the P-M interaction curves of design codes [8, 13, 14] with the test results of CES and PSRC composite columns under eccentric load with a low eccentricity ratio of e/h = 0.1 and 0.3. As the eccentricity ratio increased, the structural behavior changed from compression to flexure. The peak strength of the CES composite column was less than that of the PSRC composite column with e/h = 0.3. This is because the effective compressive area of the steel and concrete sections was increased in the PSRC composite column with large eccentricity. In the PSRC composite columns, the P-M interaction curves of design codes were similarly predicted at the load level of 0.2Pn to 0.5Pn, regardless of the assumption for the stress distribution. Further, the maximum flexural strength predictions of the PSRC composite columns were greater than those of the CES composite columns, because of the steel angles placed at the four corners of the column. This result indicates that when the same amount of the steel is used for composite columns, the flexural strength of PSRC composite columns can be greater than that of CES composite columns under general design compression load (= 0.2Pn ~ 0.5Pn).
\nThe ultimate flexural strength of a PSRC composite column can be evaluated by performing a section analysis based on either plastic stresses (i.e., plastic stress method) or strain-induced stresses (i.e., strain-compatibility method); the stresses of the steel angles, reinforcing bars, and concrete are determined by linear strain distribution and the stress–strain relationships of the materials [1]. Figure 8 shows the stress distributions at the PSRC cross section by two methods. For the plastic stress method (Figure 8(a)), plastic stresses of concrete, steel angles, and reinforcing bars can be used as 0.85fc′, Fy, and Fyr, respectively. For the strain-compatibility method (Figure 8(b)), strain-induced stresses of angles, reinforcing bars, and concrete can be determined assuming linear distribution of strain over the entire cross section.
\nSection analysis methods of PSRC column: (a) plastic stress method and (b) strain-compatibility method.
where \n
The shear resistance of a PSRC composite column is provided by concrete, transverse reinforcement, and steel angles. Since the dimensions of the angle cross section are significantly less than that of the entire cross section, the contribution of the angles to the shear strength is neglected. Thus, the nominal shear strength Vn of a PSRC composite column can be calculated, on the basis of current RC design code [13].
\nwhere b = width of the cross section; d = effective depth of the cross section; and Ast, Fyt, and s = area, yield stress, and spacing of the transverse reinforcement, respectively.
\nFigure 9 shows the details of the weld- or bolt-connection between the steel angles and transverse reinforcement. Before spalling of concrete cover, the shear transfer between the steel angles and concrete is provided by friction of the angle surface and concrete bearing of the transverse reinforcement projected from the angle surface. Conservatively neglecting the frictional resistance, the nominal bond strength Bn of a steel angle is provided by the concrete bearing of the transverse reinforcement [1].
\nwhere dbt = diameter or thickness of a transverse reinforcement projected from the angle surface; lwt = weld length of a transverse bar or projected length of a transverse plate from the angle surface; ls = shear span length of the PSRC composite column; and α = a factor addressing the confinement effect on the bearing area (≤2.0). After spalling of concrete cover at large inelastic flexural deformation, concrete bearing disappears and is replaced by dowel action of the transverse reinforcement.
\nBond strength between steel angle and concrete.
Figure 10 shows the test setup for the flexural loading tests to investigate the flexural and shear strengths, shear transfer between steel angle and concrete, and strength at the joint between steel angle and transverse reinforcement. The columns are simply supported, and two-point loading is applied at the center of the columns. To estimate the curvature, deflections at least three points need to be measured.
\nTest setup of flexural loading tests.
Figure 11(a) shows the moment-curvature relationships at the center span of a CES column and a PSRC column with a cross section of 500 mm × 500 mm (i.e., 2.0% steel ratio) [1]. In the PSRC column using the same steel ratio of the CES column, the peak strength was 56.7% greater than that of the CES column for the following reasons: (1) the yield strength of the steel angles used for the PSRC column was 15.9% greater than that of the wide-flange steel section used for the CES column and (2) the angles placed at the four corners of the cross section can develop 35.2% higher nominal flexural capacity than the center wide-flange steel section. In the PSRC column, the load-carrying capacity was suddenly decreased when bond failure (i.e., concrete bearing failure) occurred in the bottom angles in the shear span (Figure 12(b)). After the bond failure, dowel action of the transverse bars developed, causing significant bond-slip deformation. Ultimately, it failed due to the fracture of the transverse bars and spalling of web concrete, which was the typical bond-shear failure mode of the PSRC composite column.
\nMoment-curvature relationships at the center span of CES and PSRC columns: (a) CES and PSRC columns; (b) PSRC columns according to transverse bar spacing.
Failure modes of CES and PSRC columns. (a) CES column, (b) PSRC column, (c) PSRC column @ 100 mm tie, (d) PSRC column @ 200 mm tie, (e) PSRC column @ 300 mm tie.
Figure 11(b) compares the effect of transverse reinforcement spacing on the moment-curvature relationship of PSRC composite columns with a smaller cross section of 400 mm × 400 mm (i.e., 3.1% steel ratio). When the transverse reinforcement at a spacing of 100 mm was used, the load-carrying capacity was degraded due to spalling of cover concrete in the uniform moment span, but was slightly recovered due to the strain hardening of the steel angles. Ultimately, it failed due to the tensile fracture of the bottom angle in the uniform moment span (Figure 12(c)). The moment-curvature relationship and failure mode of the PSRC composite column with greater transverse reinforcement spacing of 200 mm were similar to those of the PSRC composite column with transverse reinforcement spacing of 100 mm. It failed due to tensile fracture of the angles in the uniform moment span (Figure 12(d)). In the PSRC composite column with the greatest transverse reinforcement spacing of 300 mm, bond failure occurred in the bottom angles. After the bond failure, the load-carrying capacity was significantly decreased due to spalling of web concrete caused by dowel action of the transverse reinforcement. Ultimately, it failed due to fracture of the transverse reinforcement (Figure 12(e)).
\nFigure 13 shows the test setup of cyclic loading tests for CES and PSRC composite columns. Using two oil jacks, a uniform axial load corresponding to about 22% of compressive capacity are applied, and a cyclic lateral load is applied using an actuator to the column.
\nTest setup of cyclic loading tests.
Figure 14 compares the cyclic behaviors of the CES and PSRC composite columns using steel ratio of 2.2%. In the CES composite column, the load-carrying capacity gradually decreased after the peak strength. Although spalling of the cover concrete occurred at the lateral drift of 3.0–4.0% in the plastic hinge region, the load-carrying capacity was not significantly decreased. However, after the spalling of the cover concrete, post-yield buckling occurred in the longitudinal bars. Ultimately, it failed at the drift ratio of 7.0% because of a low cycle fatigue fracture of the longitudinal bars. In the PSRC composite column, the peak strength was 20% greater than that of the CES composite column because of the higher yield strength and the location of the steel angles. Spalling of the cover concrete occurred at the drift ratio of 3.0%, and significant shear cracks occurred in the plastic hinge region because of the increased shear demand. The angles and transverse reinforcement were exposed because of the spalling of cover concrete at the drift ratio of 5.0%. The exposed angles and longitudinal bars were subjected to local buckling during repeated cyclic loading. As a result, the load-carrying capacity was degraded. However, despite the local buckling of angles and longitudinal bars, tensile fracture did not occur at the joint between the angles and transverse reinforcement.
\nLateral load-drift relationships of CES and PSRC columns: (a) CES column and (b) PSRC column.
Figure 15 shows a U-shaped composite beam-PSRC composite column connection. In order to minimize the workability problem during concrete pouring, only the web plate of the U-section is passed through the joint, and the top and bottom flanges are connected to the top and bottom band plates in the joint. Under high axial compressive force and cyclic lateral loading, premature cover concrete spalling of the joint may deteriorate the connection’s strength and deformation capacity.
\nBeam-column joint details: (a) interior beam-column joint and (b) exterior beam-column joint.
Figure 16 shows the three mechanisms that contribute to the joint shear strength: web shear yielding of the U-shaped steel section (Figure 16(a)), direct strut action of the in-filled concrete inside the U-shaped section (Figure 16(b)), and the strut-and-tie action between the concrete (outside of the U-shaped section) and the band plates (Figure 16(c)) [2]. The shear strength Vws of the two web plates is defined as follows:
\nwhere tw = web thickness; and hwj = effective horizontal length of the web in the joint in the direction of the shear.
\nJoint shear strength mechanisms. (a) Web shear yielding (Vws), (b) Concrete diagonal strut (Vcs), (c) Strut and tie action (Vst), (d) Effective width bo for interior joint, (e) Joint shear demand.
The shear strength Vcs of the direct concrete strut is defined as follows:
\nwhere bic = width of the in-filled concrete, hc = depth of the PSRC composite column; and hb = overall depth of the composite beam including the concrete slab.
\nThe shear strength Vst of the strut-and-tie action is defined as follows:
\nwhere bo = effective width of the joint concrete; ho = effective length of the joint concrete in the direction of shear; baf = distance between the corner angles in the direction orthogonal to the shear; and bic and tw = width of the in-filled concrete and web of the U-shaped section, respectively.
\nFor the strut-and-tie mechanism in Eq. (14), the tension force caused by the concrete strut should be resisted by the top and bottom band plates. Thus, the required cross-sectional area Abp of each band plate is calculated as follows:
\nwhere 2Fybp = yield strength of the top and bottom band plates.
\nThe joint shear capacity and demand can be expressed as moments, from the static moment equilibrium at the joint (Figure 16(e)).
\nwhere (ΣMuc - ΣVb ho/2) and Mnc = joint shear demand and capacity, respectively; ΣMpb and ΣVb = sums of the plastic moments and shear demands, respectively, of the composite beams framing into the joint; Vc = column shear demand; dw = center-to-center distance between the top and bottom flanges; 0.75hb = approximate moment arm for the composite beam section; and db = center-to-center distance between the top and bottom band plates.
\nFigure 17 shows the cyclic lateral load-story drift ratio relationships of U-shaped steel composite beam-PSRC composite column joints. The composite beam has 330 mm width and 700 mm height including slab. The PSRC composite column has 800 mm × 800 mm cross-sectional area. In the interior beam-column joint, cover concrete spalling in the PSRC composite column occurred in the vicinity of the U-section, whose web plate buckled, and severe diagonal cracking occurred in the joint face. The fracture was initiated at the weld joint between the web and the bottom flange and then propagated vertically. Because the band plates were not connected to the bottom flange of the U-section, the band plates were not damaged even after cover concrete spalling. However, a gap occurred between the end of the U-section and the column face under positive moments, which was attributed to an anchorage slip of the web plates showing plastic strains inside the joint. As the anchorage slip increased, development of the beam’s flexural capacities was delayed, which caused significant pinching in the cyclic behavior. The top band plates welded to the top flange of the U-section were pulled out under a negative moment. In the exterior beam-column joint, after the peak strengths, the load-carrying capacity was significantly degraded because of cover concrete spalling in the PSRC composite column and because of local buckling and fracture of the web in the composite beam. The steel angles of the column were completely exposed.
\nLateral load-drift relationships: (a) interior beam-column joint and (b) exterior beam-column joint.
In this chapter, a prefabricated steel-reinforced concrete (PSRC) composite column using steel angles was introduced. Using current design codes, the structural capacities of PSRC composite columns can be evaluated, and it shows better performance than those of a conventional concrete-encased steel (CES) composite column.
The axial load-carrying capacity and deformation capacity of PSRC composite columns are comparable to, or even better than, those of conventional CES composite columns. In the PSRC composite column under axial compression, the corner angles and the transverse reinforcement provide adequate lateral confinement to the concrete.
The corner angles of the PSRC composite column increase the flexural strength and stiffness up to about 30%, compared to those of the conventional CES composite columns.
The bond strength between steel angles and concrete is generated by the bearing strength of the transverse reinforcement projected from the steel angle surface. When the bond strength is greater than the demand (i.e., when close spacing of tie bars is used), the PSRC composite columns show ductile behavior after flexural yielding without bond failure, and ultimately fail due to fracture of the steel angles. Otherwise, significant bond slip occurs in the steel angles, and ultimately the columns fail due to the bond failure of steel angles or the fracture of transverse bars.
Under cyclic lateral loading, the PSRC composite columns show about 20% lower deformation capacities than that of the conventional CES composite column. The lower deformation capacity of the PSRC composite columns is attributed to the following reasons: (1) relatively large plastic strains occur in the corner steel angles; (2) after spalling of the cover concrete, the exposed steel angles are susceptible to local buckling; and (3) the shear demand of the transverse reinforcement increases.
In composite beam-PSRC composite column joints, the load-carrying capacity decreases because of the web local buckling of the U-section at the column face. Ultimately, the beam-column joints fail because of a tensile fracture of the buckled web plates initiated at the weld joint between the web and the bottom flange of the U-section. As yielding occurs in the web plate of the beam, significant web plate anchorage slip occurs inside the joint. However, the anchorage slip mitigates possible stress concentration that may be caused by the discontinuity of the flange plate, which contributes to the increase in deformation capacity.
Customer Satisfaction is of paramount importance at IntechOpen and we take all complaints very seriously. Our Authors, their institutions, and other purchasers, if dissatisfied with the service provided, or the product purchased, can file a written complaint to IntechOpen, 7th floor, 10 Lower Thames Street, London, EC3R 6AF, UK or via the following e-mail address: info@intechopen.com.
',metaTitle:"Customer Complaints",metaDescription:"Our authors, their institutions and other purchasers, if unsatisfied with the service provided or the product purchased, can file a written complaint at IN TECH d.o.o offices at Janeza Trdine 9, 51000 Rijeka, Croatia, or via the following e-mail address: info@intechopen.com.",metaKeywords:null,canonicalURL:null,contentRaw:'[{"type":"htmlEditorComponent","content":"Receipt of complaints will be acknowledged in writing and Intech Limited will respond fully to concerns within 15 business days.
\\n\\nCustomers have the right to terminate the contract without giving any reason (written notice of termination). The deadline for said termination is fourteen (14) days from the date of receipt of goods. Returns are at the expense of the Customer and must be made within the fourteen (14) days from the date of the written notice of termination. Intech Limited will process refunds to the Customer without undue delay.
\\n\\nIn the event that the Publisher ships damaged or misbound copies of products, or duplicate or incorrect copies of the products are received by the Customer, the Publisher will accept returns at the Publisher's expense, provided notice of such damaged or incorrect shipment is given to the Publisher within fourteen (14) working days from the date of receipt.
\\n\\nPublishing errors, including but not limited to typographical errors, having no significant effect on the editorial content or design characteristics of the products, cannot be considered a reason for rejecting payment or, as the case may be, modifying the agreed price.
\\n\\nAt the Publisher's request, the customer should provide evidence of the damaged or incorrect shipment. The Publisher will refund or ship the ordered products without delays.
\\n"}]'},components:[{type:"htmlEditorComponent",content:"Receipt of complaints will be acknowledged in writing and Intech Limited will respond fully to concerns within 15 business days.
\n\nCustomers have the right to terminate the contract without giving any reason (written notice of termination). The deadline for said termination is fourteen (14) days from the date of receipt of goods. Returns are at the expense of the Customer and must be made within the fourteen (14) days from the date of the written notice of termination. Intech Limited will process refunds to the Customer without undue delay.
\n\nIn the event that the Publisher ships damaged or misbound copies of products, or duplicate or incorrect copies of the products are received by the Customer, the Publisher will accept returns at the Publisher's expense, provided notice of such damaged or incorrect shipment is given to the Publisher within fourteen (14) working days from the date of receipt.
\n\nPublishing errors, including but not limited to typographical errors, having no significant effect on the editorial content or design characteristics of the products, cannot be considered a reason for rejecting payment or, as the case may be, modifying the agreed price.
\n\nAt the Publisher's request, the customer should provide evidence of the damaged or incorrect shipment. The Publisher will refund or ship the ordered products without delays.
\n"}]},successStories:{items:[]},authorsAndEditors:{filterParams:{sort:"featured,name"},profiles:[{id:"6700",title:"Dr.",name:"Abbass A.",middleName:null,surname:"Hashim",slug:"abbass-a.-hashim",fullName:"Abbass A. Hashim",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/6700/images/1864_n.jpg",biography:"Currently I am carrying out research in several areas of interest, mainly covering work on chemical and bio-sensors, semiconductor thin film device fabrication and characterisation.\nAt the moment I have very strong interest in radiation environmental pollution and bacteriology treatment. The teams of researchers are working very hard to bring novel results in this field. I am also a member of the team in charge for the supervision of Ph.D. students in the fields of development of silicon based planar waveguide sensor devices, study of inelastic electron tunnelling in planar tunnelling nanostructures for sensing applications and development of organotellurium(IV) compounds for semiconductor applications. I am a specialist in data analysis techniques and nanosurface structure. I have served as the editor for many books, been a member of the editorial board in science journals, have published many papers and hold many patents.",institutionString:null,institution:{name:"Sheffield Hallam University",country:{name:"United Kingdom"}}},{id:"54525",title:"Prof.",name:"Abdul Latif",middleName:null,surname:"Ahmad",slug:"abdul-latif-ahmad",fullName:"Abdul Latif Ahmad",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"20567",title:"Prof.",name:"Ado",middleName:null,surname:"Jorio",slug:"ado-jorio",fullName:"Ado Jorio",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Universidade Federal de Minas Gerais",country:{name:"Brazil"}}},{id:"47940",title:"Dr.",name:"Alberto",middleName:null,surname:"Mantovani",slug:"alberto-mantovani",fullName:"Alberto Mantovani",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"12392",title:"Mr.",name:"Alex",middleName:null,surname:"Lazinica",slug:"alex-lazinica",fullName:"Alex Lazinica",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/12392/images/7282_n.png",biography:"Alex Lazinica is the founder and CEO of IntechOpen. After obtaining a Master's degree in Mechanical Engineering, he continued his PhD studies in Robotics at the Vienna University of Technology. Here he worked as a robotic researcher with the university's Intelligent Manufacturing Systems Group as well as a guest researcher at various European universities, including the Swiss Federal Institute of Technology Lausanne (EPFL). During this time he published more than 20 scientific papers, gave presentations, served as a reviewer for major robotic journals and conferences and most importantly he co-founded and built the International Journal of Advanced Robotic Systems- world's first Open Access journal in the field of robotics. Starting this journal was a pivotal point in his career, since it was a pathway to founding IntechOpen - Open Access publisher focused on addressing academic researchers needs. Alex is a personification of IntechOpen key values being trusted, open and entrepreneurial. Today his focus is on defining the growth and development strategy for the company.",institutionString:null,institution:{name:"TU Wien",country:{name:"Austria"}}},{id:"19816",title:"Prof.",name:"Alexander",middleName:null,surname:"Kokorin",slug:"alexander-kokorin",fullName:"Alexander Kokorin",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/19816/images/1607_n.jpg",biography:"Alexander I. Kokorin: born: 1947, Moscow; DSc., PhD; Principal Research Fellow (Research Professor) of Department of Kinetics and Catalysis, N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, Moscow.\nArea of research interests: physical chemistry of complex-organized molecular and nanosized systems, including polymer-metal complexes; the surface of doped oxide semiconductors. He is an expert in structural, absorptive, catalytic and photocatalytic properties, in structural organization and dynamic features of ionic liquids, in magnetic interactions between paramagnetic centers. The author or co-author of 3 books, over 200 articles and reviews in scientific journals and books. He is an actual member of the International EPR/ESR Society, European Society on Quantum Solar Energy Conversion, Moscow House of Scientists, of the Board of Moscow Physical Society.",institutionString:null,institution:null},{id:"62389",title:"PhD.",name:"Ali Demir",middleName:null,surname:"Sezer",slug:"ali-demir-sezer",fullName:"Ali Demir Sezer",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/62389/images/3413_n.jpg",biography:"Dr. Ali Demir Sezer has a Ph.D. from Pharmaceutical Biotechnology at the Faculty of Pharmacy, University of Marmara (Turkey). He is the member of many Pharmaceutical Associations and acts as a reviewer of scientific journals and European projects under different research areas such as: drug delivery systems, nanotechnology and pharmaceutical biotechnology. Dr. Sezer is the author of many scientific publications in peer-reviewed journals and poster communications. Focus of his research activity is drug delivery, physico-chemical characterization and biological evaluation of biopolymers micro and nanoparticles as modified drug delivery system, and colloidal drug carriers (liposomes, nanoparticles etc.).",institutionString:null,institution:{name:"Marmara University",country:{name:"Turkey"}}},{id:"61051",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:null},{id:"100762",title:"Prof.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"St David's Medical Center",country:{name:"United States of America"}}},{id:"107416",title:"Dr.",name:"Andrea",middleName:null,surname:"Natale",slug:"andrea-natale",fullName:"Andrea Natale",position:null,profilePictureURL:"//cdnintech.com/web/frontend/www/assets/author.svg",biography:null,institutionString:null,institution:{name:"Texas Cardiac Arrhythmia",country:{name:"United States of America"}}},{id:"64434",title:"Dr.",name:"Angkoon",middleName:null,surname:"Phinyomark",slug:"angkoon-phinyomark",fullName:"Angkoon Phinyomark",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/64434/images/2619_n.jpg",biography:"My name is Angkoon Phinyomark. I received a B.Eng. degree in Computer Engineering with First Class Honors in 2008 from Prince of Songkla University, Songkhla, Thailand, where I received a Ph.D. degree in Electrical Engineering. My research interests are primarily in the area of biomedical signal processing and classification notably EMG (electromyography signal), EOG (electrooculography signal), and EEG (electroencephalography signal), image analysis notably breast cancer analysis and optical coherence tomography, and rehabilitation engineering. I became a student member of IEEE in 2008. During October 2011-March 2012, I had worked at School of Computer Science and Electronic Engineering, University of Essex, Colchester, Essex, United Kingdom. In addition, during a B.Eng. I had been a visiting research student at Faculty of Computer Science, University of Murcia, Murcia, Spain for three months.\n\nI have published over 40 papers during 5 years in refereed journals, books, and conference proceedings in the areas of electro-physiological signals processing and classification, notably EMG and EOG signals, fractal analysis, wavelet analysis, texture analysis, feature extraction and machine learning algorithms, and assistive and rehabilitative devices. I have several computer programming language certificates, i.e. Sun Certified Programmer for the Java 2 Platform 1.4 (SCJP), Microsoft Certified Professional Developer, Web Developer (MCPD), Microsoft Certified Technology Specialist, .NET Framework 2.0 Web (MCTS). I am a Reviewer for several refereed journals and international conferences, such as IEEE Transactions on Biomedical Engineering, IEEE Transactions on Industrial Electronics, Optic Letters, Measurement Science Review, and also a member of the International Advisory Committee for 2012 IEEE Business Engineering and Industrial Applications and 2012 IEEE Symposium on Business, Engineering and Industrial Applications.",institutionString:null,institution:{name:"Joseph Fourier University",country:{name:"France"}}},{id:"55578",title:"Dr.",name:"Antonio",middleName:null,surname:"Jurado-Navas",slug:"antonio-jurado-navas",fullName:"Antonio Jurado-Navas",position:null,profilePictureURL:"https://mts.intechopen.com/storage/users/55578/images/4574_n.png",biography:"Antonio Jurado-Navas received the M.S. degree (2002) and the Ph.D. degree (2009) in Telecommunication Engineering, both from the University of Málaga (Spain). He first worked as a consultant at Vodafone-Spain. From 2004 to 2011, he was a Research Assistant with the Communications Engineering Department at the University of Málaga. In 2011, he became an Assistant Professor in the same department. From 2012 to 2015, he was with Ericsson Spain, where he was working on geo-location\ntools for third generation mobile networks. Since 2015, he is a Marie-Curie fellow at the Denmark Technical University. His current research interests include the areas of mobile communication systems and channel modeling in addition to atmospheric optical communications, adaptive optics and statistics",institutionString:null,institution:{name:"University of Malaga",country:{name:"Spain"}}}],filtersByRegion:[{group:"region",caption:"North America",value:1,count:5313},{group:"region",caption:"Middle and South America",value:2,count:4819},{group:"region",caption:"Africa",value:3,count:1468},{group:"region",caption:"Asia",value:4,count:9362},{group:"region",caption:"Australia and Oceania",value:5,count:837},{group:"region",caption:"Europe",value:6,count:14778}],offset:12,limit:12,total:108153},chapterEmbeded:{data:{}},editorApplication:{success:null,errors:{}},ofsBooks:{filterParams:{topicId:"10"},books:[{type:"book",id:"7316",title:"Seepage - Steady State Flow of Water",subtitle:null,isOpenForSubmission:!0,hash:"2db3d61cbecd04230717ab1d9e5cd4b1",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/7316.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7724",title:"Climate Issues in China",subtitle:null,isOpenForSubmission:!0,hash:"f5642f989826772a94001c51e2030ea1",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/7724.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7996",title:"Wildfire in the Wildland Urban Interface",subtitle:null,isOpenForSubmission:!0,hash:"caac4a94c451c97cf8b52a6dcbac746b",slug:null,bookSignature:"Dr. Jason Gordon",coverURL:"https://cdn.intechopen.com/books/images_new/7996.jpg",editedByType:null,editors:[{id:"264298",title:"Dr.",name:"Jason",surname:"Gordon",slug:"jason-gordon",fullName:"Jason Gordon"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8037",title:"Paleontology",subtitle:null,isOpenForSubmission:!0,hash:"369bbc9633ff0e0d4f62335075242d2a",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/8037.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8113",title:"Ocean Wave Studies",subtitle:null,isOpenForSubmission:!0,hash:"f7eaf28497842d73eb2ce64a1415aec2",slug:null,bookSignature:"Dr. Marcello Di Risio, Dr. Daniele Celli and Dr. Davide Pasquali",coverURL:"https://cdn.intechopen.com/books/images_new/8113.jpg",editedByType:null,editors:[{id:"15209",title:"Prof.",name:"Marcello",surname:"Di Risio",slug:"marcello-di-risio",fullName:"Marcello Di Risio"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8481",title:"River Deltas",subtitle:null,isOpenForSubmission:!0,hash:"8dd049b4bf7f01bdeda390d40a27b0c8",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/8481.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8485",title:"Weather Forecasting",subtitle:null,isOpenForSubmission:!0,hash:"01daf31ddded5641c4ed88eca67b4284",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/8485.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8556",title:"Mars Exploration",subtitle:null,isOpenForSubmission:!0,hash:"44538d785d8dfcc0d4f809e3a62b0035",slug:null,bookSignature:"Prof. Giuseppe Pezzella and Prof. Antonio Viviani",coverURL:"https://cdn.intechopen.com/books/images_new/8556.jpg",editedByType:null,editors:[{id:"14939",title:"Prof.",name:"Giuseppe",surname:"Pezzella",slug:"giuseppe-pezzella",fullName:"Giuseppe Pezzella"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8568",title:"Intelligent Life Beyond Earth",subtitle:null,isOpenForSubmission:!0,hash:"f678594f3e4c852a12790aca46dbcdc2",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/8568.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9242",title:"Biogeoscience Research",subtitle:null,isOpenForSubmission:!0,hash:"dc62d7b263bcc3b797384e73513297f9",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/9242.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9245",title:"Landmines and Security",subtitle:null,isOpenForSubmission:!0,hash:"5015fc770dfb6f6e67a5dd370f1668a0",slug:null,bookSignature:"Dr. K.T.M. Udayanga Hemapala",coverURL:"https://cdn.intechopen.com/books/images_new/9245.jpg",editedByType:null,editors:[{id:"128187",title:"Dr.",name:"K.T.M.",surname:"Hemapala",slug:"k.t.m.-hemapala",fullName:"K.T.M. Hemapala"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"9248",title:"Galaxies",subtitle:null,isOpenForSubmission:!0,hash:"364566b36a78a23c895936974dc002ee",slug:null,bookSignature:"",coverURL:"https://cdn.intechopen.com/books/images_new/9248.jpg",editedByType:null,editors:null,productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],filtersByTopic:[{group:"topic",caption:"Agricultural and Biological Sciences",value:5,count:35},{group:"topic",caption:"Biochemistry, Genetics and Molecular Biology",value:6,count:32},{group:"topic",caption:"Business, Management and Economics",value:7,count:9},{group:"topic",caption:"Chemistry",value:8,count:29},{group:"topic",caption:"Computer and Information Science",value:9,count:26},{group:"topic",caption:"Earth and Planetary Sciences",value:10,count:14},{group:"topic",caption:"Engineering",value:11,count:75},{group:"topic",caption:"Environmental Sciences",value:12,count:13},{group:"topic",caption:"Immunology and Microbiology",value:13,count:3},{group:"topic",caption:"Materials Science",value:14,count:37},{group:"topic",caption:"Mathematics",value:15,count:14},{group:"topic",caption:"Medicine",value:16,count:137},{group:"topic",caption:"Nanotechnology and Nanomaterials",value:17,count:5},{group:"topic",caption:"Neuroscience",value:18,count:6},{group:"topic",caption:"Pharmacology, Toxicology and Pharmaceutical Science",value:19,count:8},{group:"topic",caption:"Physics",value:20,count:19},{group:"topic",caption:"Psychology",value:21,count:2},{group:"topic",caption:"Robotics",value:22,count:6},{group:"topic",caption:"Social Sciences",value:23,count:13},{group:"topic",caption:"Technology",value:24,count:10},{group:"topic",caption:"Veterinary Medicine and Science",value:25,count:3},{group:"topic",caption:"Intelligent System",value:535,count:1}],offset:12,limit:12,total:41},popularBooks:{featuredBooks:[{type:"book",id:"7878",title:"Advances in Extracorporeal Membrane Oxygenation",subtitle:"Volume 3",isOpenForSubmission:!1,hash:"f95bf990273d08098a00f9a1c2403cbe",slug:"advances-in-extracorporeal-membrane-oxygenation-volume-3",bookSignature:"Michael S. Firstenberg",coverURL:"https://cdn.intechopen.com/books/images_new/7878.jpg",editors:[{id:"64343",title:null,name:"Michael S.",middleName:"S",surname:"Firstenberg",slug:"michael-s.-firstenberg",fullName:"Michael S. Firstenberg"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8299",title:"Timber Buildings and Sustainability",subtitle:null,isOpenForSubmission:!1,hash:"bccf2891cec38ed041724131aa34c25a",slug:"timber-buildings-and-sustainability",bookSignature:"Giovanna Concu",coverURL:"https://cdn.intechopen.com/books/images_new/8299.jpg",editors:[{id:"108709",title:"Dr.",name:"Giovanna",middleName:null,surname:"Concu",slug:"giovanna-concu",fullName:"Giovanna Concu"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7614",title:"Fourier Transforms",subtitle:"Century of Digitalization and Increasing Expectations",isOpenForSubmission:!1,hash:"ff3501657ae983a3b42fef1f7058ac91",slug:"fourier-transforms-century-of-digitalization-and-increasing-expectations",bookSignature:"Goran S. Nikoli? and Dragana Z. Markovi?-Nikoli?",coverURL:"https://cdn.intechopen.com/books/images_new/7614.jpg",editors:[{id:"23261",title:"Prof.",name:"Goran",middleName:"S.",surname:"Nikolic",slug:"goran-nikolic",fullName:"Goran Nikolic"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7062",title:"Rhinosinusitis",subtitle:null,isOpenForSubmission:!1,hash:"14ed95e155b1e57a61827ca30b579d09",slug:"rhinosinusitis",bookSignature:"Balwant Singh Gendeh and Mirjana Turkalj",coverURL:"https://cdn.intechopen.com/books/images_new/7062.jpg",editors:[{id:"67669",title:"Prof.",name:"Balwant Singh",middleName:null,surname:"Gendeh",slug:"balwant-singh-gendeh",fullName:"Balwant Singh Gendeh"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7087",title:"Tendons",subtitle:null,isOpenForSubmission:!1,hash:"786abac0445c102d1399a1e727a2db7f",slug:"tendons",bookSignature:"Hasan Sözen",coverURL:"https://cdn.intechopen.com/books/images_new/7087.jpg",editors:[{id:"161402",title:"Dr.",name:"Hasan",middleName:null,surname:"Sözen",slug:"hasan-sozen",fullName:"Hasan Sözen"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7955",title:"Advances in Hematologic Malignancies",subtitle:null,isOpenForSubmission:!1,hash:"59ca1b09447fab4717a93e099f646d28",slug:"advances-in-hematologic-malignancies",bookSignature:"Gamal Abdul Hamid",coverURL:"https://cdn.intechopen.com/books/images_new/7955.jpg",editors:[{id:"36487",title:"Prof.",name:"Gamal",middleName:null,surname:"Abdul Hamid",slug:"gamal-abdul-hamid",fullName:"Gamal Abdul Hamid"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7701",title:"Assistive and Rehabilitation Engineering",subtitle:null,isOpenForSubmission:!1,hash:"4191b744b8af3b17d9a80026dcb0617f",slug:"assistive-and-rehabilitation-engineering",bookSignature:"Yves Rybarczyk",coverURL:"https://cdn.intechopen.com/books/images_new/7701.jpg",editors:[{id:"72920",title:"Prof.",name:"Yves",middleName:"Philippe",surname:"Rybarczyk",slug:"yves-rybarczyk",fullName:"Yves Rybarczyk"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7837",title:"Geriatric Medicine and Gerontology",subtitle:null,isOpenForSubmission:!1,hash:"e277d005b23536bcd9f8550046101979",slug:"geriatric-medicine-and-gerontology",bookSignature:"Edward T. Zawada Jr.",coverURL:"https://cdn.intechopen.com/books/images_new/7837.jpg",editors:[{id:"16344",title:"Dr.",name:"Edward T.",middleName:null,surname:"Zawada Jr.",slug:"edward-t.-zawada-jr.",fullName:"Edward T. Zawada Jr."}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7123",title:"Current Topics in Neglected Tropical Diseases",subtitle:null,isOpenForSubmission:!1,hash:"61c627da05b2ace83056d11357bdf361",slug:"current-topics-in-neglected-tropical-diseases",bookSignature:"Alfonso J. Rodriguez-Morales",coverURL:"https://cdn.intechopen.com/books/images_new/7123.jpg",editors:[{id:"131400",title:"Dr.",name:"Alfonso J.",middleName:null,surname:"Rodriguez-Morales",slug:"alfonso-j.-rodriguez-morales",fullName:"Alfonso J. Rodriguez-Morales"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7610",title:"Renewable and Sustainable Composites",subtitle:null,isOpenForSubmission:!1,hash:"c2de26c3d329c54f093dc3f05417500a",slug:"renewable-and-sustainable-composites",bookSignature:"António B. Pereira and Fábio A. O. Fernandes",coverURL:"https://cdn.intechopen.com/books/images_new/7610.jpg",editors:[{id:"211131",title:"Prof.",name:"António",middleName:"Bastos",surname:"Pereira",slug:"antonio-pereira",fullName:"António Pereira"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8416",title:"Non-Equilibrium Particle Dynamics",subtitle:null,isOpenForSubmission:!1,hash:"2c3add7639dcd1cb442cb4313ea64e3a",slug:"non-equilibrium-particle-dynamics",bookSignature:"Albert S. Kim",coverURL:"https://cdn.intechopen.com/books/images_new/8416.jpg",editors:[{id:"21045",title:"Prof.",name:"Albert S.",middleName:null,surname:"Kim",slug:"albert-s.-kim",fullName:"Albert S. Kim"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8008",title:"Antioxidants",subtitle:null,isOpenForSubmission:!1,hash:"76361b4061e830906267933c1c670027",slug:"antioxidants",bookSignature:"Emad Shalaby",coverURL:"https://cdn.intechopen.com/books/images_new/8008.jpg",editors:[{id:"63600",title:"Prof.",name:"Emad",middleName:null,surname:"Shalaby",slug:"emad-shalaby",fullName:"Emad Shalaby"}],productType:{id:"1",chapterContentType:"chapter"}}],offset:12,limit:12,total:4392},hotBookTopics:{hotBooks:[],offset:0,limit:12,total:null},publish:{},publishingProposal:{success:null,errors:{}},books:{featuredBooks:[{type:"book",id:"7878",title:"Advances in Extracorporeal Membrane Oxygenation",subtitle:"Volume 3",isOpenForSubmission:!1,hash:"f95bf990273d08098a00f9a1c2403cbe",slug:"advances-in-extracorporeal-membrane-oxygenation-volume-3",bookSignature:"Michael S. Firstenberg",coverURL:"https://cdn.intechopen.com/books/images_new/7878.jpg",editors:[{id:"64343",title:null,name:"Michael S.",middleName:"S",surname:"Firstenberg",slug:"michael-s.-firstenberg",fullName:"Michael S. Firstenberg"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8299",title:"Timber Buildings and Sustainability",subtitle:null,isOpenForSubmission:!1,hash:"bccf2891cec38ed041724131aa34c25a",slug:"timber-buildings-and-sustainability",bookSignature:"Giovanna Concu",coverURL:"https://cdn.intechopen.com/books/images_new/8299.jpg",editors:[{id:"108709",title:"Dr.",name:"Giovanna",middleName:null,surname:"Concu",slug:"giovanna-concu",fullName:"Giovanna Concu"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7614",title:"Fourier Transforms",subtitle:"Century of Digitalization and Increasing Expectations",isOpenForSubmission:!1,hash:"ff3501657ae983a3b42fef1f7058ac91",slug:"fourier-transforms-century-of-digitalization-and-increasing-expectations",bookSignature:"Goran S. Nikoli? and Dragana Z. Markovi?-Nikoli?",coverURL:"https://cdn.intechopen.com/books/images_new/7614.jpg",editors:[{id:"23261",title:"Prof.",name:"Goran",middleName:"S.",surname:"Nikolic",slug:"goran-nikolic",fullName:"Goran Nikolic"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7062",title:"Rhinosinusitis",subtitle:null,isOpenForSubmission:!1,hash:"14ed95e155b1e57a61827ca30b579d09",slug:"rhinosinusitis",bookSignature:"Balwant Singh Gendeh and Mirjana Turkalj",coverURL:"https://cdn.intechopen.com/books/images_new/7062.jpg",editors:[{id:"67669",title:"Prof.",name:"Balwant Singh",middleName:null,surname:"Gendeh",slug:"balwant-singh-gendeh",fullName:"Balwant Singh Gendeh"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7087",title:"Tendons",subtitle:null,isOpenForSubmission:!1,hash:"786abac0445c102d1399a1e727a2db7f",slug:"tendons",bookSignature:"Hasan Sözen",coverURL:"https://cdn.intechopen.com/books/images_new/7087.jpg",editors:[{id:"161402",title:"Dr.",name:"Hasan",middleName:null,surname:"Sözen",slug:"hasan-sozen",fullName:"Hasan Sözen"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7955",title:"Advances in Hematologic Malignancies",subtitle:null,isOpenForSubmission:!1,hash:"59ca1b09447fab4717a93e099f646d28",slug:"advances-in-hematologic-malignancies",bookSignature:"Gamal Abdul Hamid",coverURL:"https://cdn.intechopen.com/books/images_new/7955.jpg",editors:[{id:"36487",title:"Prof.",name:"Gamal",middleName:null,surname:"Abdul Hamid",slug:"gamal-abdul-hamid",fullName:"Gamal Abdul Hamid"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7701",title:"Assistive and Rehabilitation Engineering",subtitle:null,isOpenForSubmission:!1,hash:"4191b744b8af3b17d9a80026dcb0617f",slug:"assistive-and-rehabilitation-engineering",bookSignature:"Yves Rybarczyk",coverURL:"https://cdn.intechopen.com/books/images_new/7701.jpg",editors:[{id:"72920",title:"Prof.",name:"Yves",middleName:"Philippe",surname:"Rybarczyk",slug:"yves-rybarczyk",fullName:"Yves Rybarczyk"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7837",title:"Geriatric Medicine and Gerontology",subtitle:null,isOpenForSubmission:!1,hash:"e277d005b23536bcd9f8550046101979",slug:"geriatric-medicine-and-gerontology",bookSignature:"Edward T. Zawada Jr.",coverURL:"https://cdn.intechopen.com/books/images_new/7837.jpg",editors:[{id:"16344",title:"Dr.",name:"Edward T.",middleName:null,surname:"Zawada Jr.",slug:"edward-t.-zawada-jr.",fullName:"Edward T. Zawada Jr."}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7123",title:"Current Topics in Neglected Tropical Diseases",subtitle:null,isOpenForSubmission:!1,hash:"61c627da05b2ace83056d11357bdf361",slug:"current-topics-in-neglected-tropical-diseases",bookSignature:"Alfonso J. Rodriguez-Morales",coverURL:"https://cdn.intechopen.com/books/images_new/7123.jpg",editors:[{id:"131400",title:"Dr.",name:"Alfonso J.",middleName:null,surname:"Rodriguez-Morales",slug:"alfonso-j.-rodriguez-morales",fullName:"Alfonso J. Rodriguez-Morales"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"7610",title:"Renewable and Sustainable Composites",subtitle:null,isOpenForSubmission:!1,hash:"c2de26c3d329c54f093dc3f05417500a",slug:"renewable-and-sustainable-composites",bookSignature:"António B. Pereira and Fábio A. O. Fernandes",coverURL:"https://cdn.intechopen.com/books/images_new/7610.jpg",editors:[{id:"211131",title:"Prof.",name:"António",middleName:"Bastos",surname:"Pereira",slug:"antonio-pereira",fullName:"António Pereira"}],productType:{id:"1",chapterContentType:"chapter"}}],latestBooks:[{type:"book",id:"8463",title:"Pediatric Surgery, Flowcharts and Clinical Algorithms",subtitle:null,isOpenForSubmission:!1,hash:"23f39beea4d557b0ae424e2eaf82bf5e",slug:"pediatric-surgery-flowcharts-and-clinical-algorithms",bookSignature:"Sameh Shehata",coverURL:"https://cdn.intechopen.com/books/images_new/8463.jpg",editedByType:"Edited by",editors:[{id:"37518",title:"Prof.",name:"Sameh",middleName:null,surname:"Shehata",slug:"sameh-shehata",fullName:"Sameh Shehata"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7187",title:"Osteosarcoma",subtitle:"Diagnosis, Mechanisms, and Translational Developments",isOpenForSubmission:!1,hash:"89096359b754beb806eca4c6d8aacaba",slug:"osteosarcoma-diagnosis-mechanisms-and-translational-developments",bookSignature:"Matthew Gregory Cable and Robert Lawrence Randall",coverURL:"https://cdn.intechopen.com/books/images_new/7187.jpg",editedByType:"Edited by",editors:[{id:"265693",title:"Dr.",name:"Matthew Gregory",middleName:null,surname:"Cable",slug:"matthew-gregory-cable",fullName:"Matthew Gregory Cable"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7955",title:"Advances in Hematologic Malignancies",subtitle:null,isOpenForSubmission:!1,hash:"59ca1b09447fab4717a93e099f646d28",slug:"advances-in-hematologic-malignancies",bookSignature:"Gamal Abdul Hamid",coverURL:"https://cdn.intechopen.com/books/images_new/7955.jpg",editedByType:"Edited by",editors:[{id:"36487",title:"Prof.",name:"Gamal",middleName:null,surname:"Abdul Hamid",slug:"gamal-abdul-hamid",fullName:"Gamal Abdul Hamid"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7701",title:"Assistive and Rehabilitation Engineering",subtitle:null,isOpenForSubmission:!1,hash:"4191b744b8af3b17d9a80026dcb0617f",slug:"assistive-and-rehabilitation-engineering",bookSignature:"Yves Rybarczyk",coverURL:"https://cdn.intechopen.com/books/images_new/7701.jpg",editedByType:"Edited by",editors:[{id:"72920",title:"Prof.",name:"Yves",middleName:"Philippe",surname:"Rybarczyk",slug:"yves-rybarczyk",fullName:"Yves Rybarczyk"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7726",title:"Swarm Intelligence",subtitle:"Recent Advances, New Perspectives and Applications",isOpenForSubmission:!1,hash:"e7ea7e74ce7a7a8e5359629e07c68d31",slug:"swarm-intelligence-recent-advances-new-perspectives-and-applications",bookSignature:"Javier Del Ser, Esther Villar and Eneko Osaba",coverURL:"https://cdn.intechopen.com/books/images_new/7726.jpg",editedByType:"Edited by",editors:[{id:"49813",title:"Dr.",name:"Javier",middleName:null,surname:"Del Ser",slug:"javier-del-ser",fullName:"Javier Del Ser"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8256",title:"Distillation",subtitle:"Modelling, Simulation and Optimization",isOpenForSubmission:!1,hash:"c76af109f83e14d915e5cb3949ae8b80",slug:"distillation-modelling-simulation-and-optimization",bookSignature:"Vilmar Steffen",coverURL:"https://cdn.intechopen.com/books/images_new/8256.jpg",editedByType:"Edited by",editors:[{id:"189035",title:"Dr.",name:"Vilmar",middleName:null,surname:"Steffen",slug:"vilmar-steffen",fullName:"Vilmar Steffen"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7240",title:"Growing and Handling of Bacterial Cultures",subtitle:null,isOpenForSubmission:!1,hash:"a76c3ef7718c0b72d0128817cdcbe6e3",slug:"growing-and-handling-of-bacterial-cultures",bookSignature:"Madhusmita Mishra",coverURL:"https://cdn.intechopen.com/books/images_new/7240.jpg",editedByType:"Edited by",editors:[{id:"204267",title:"Dr.",name:"Madhusmita",middleName:null,surname:"Mishra",slug:"madhusmita-mishra",fullName:"Madhusmita Mishra"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"8299",title:"Timber Buildings and Sustainability",subtitle:null,isOpenForSubmission:!1,hash:"bccf2891cec38ed041724131aa34c25a",slug:"timber-buildings-and-sustainability",bookSignature:"Giovanna Concu",coverURL:"https://cdn.intechopen.com/books/images_new/8299.jpg",editedByType:"Edited by",editors:[{id:"108709",title:"Dr.",name:"Giovanna",middleName:null,surname:"Concu",slug:"giovanna-concu",fullName:"Giovanna Concu"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7062",title:"Rhinosinusitis",subtitle:null,isOpenForSubmission:!1,hash:"14ed95e155b1e57a61827ca30b579d09",slug:"rhinosinusitis",bookSignature:"Balwant Singh Gendeh and Mirjana Turkalj",coverURL:"https://cdn.intechopen.com/books/images_new/7062.jpg",editedByType:"Edited by",editors:[{id:"67669",title:"Prof.",name:"Balwant Singh",middleName:null,surname:"Gendeh",slug:"balwant-singh-gendeh",fullName:"Balwant Singh Gendeh"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"7837",title:"Geriatric Medicine and Gerontology",subtitle:null,isOpenForSubmission:!1,hash:"e277d005b23536bcd9f8550046101979",slug:"geriatric-medicine-and-gerontology",bookSignature:"Edward T. Zawada Jr.",coverURL:"https://cdn.intechopen.com/books/images_new/7837.jpg",editedByType:"Edited by",editors:[{id:"16344",title:"Dr.",name:"Edward T.",middleName:null,surname:"Zawada Jr.",slug:"edward-t.-zawada-jr.",fullName:"Edward T. Zawada Jr."}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}]},subject:{topic:{id:"434",title:"E-Commerce",slug:"e-commerce",parent:{title:"Business Administration",slug:"business-management-and-economics-business-administration"},numberOfBooks:2,numberOfAuthorsAndEditors:13,numberOfWosCitations:5,numberOfCrossrefCitations:28,numberOfDimensionsCitations:37,videoUrl:null,fallbackUrl:null,description:null},booksByTopicFilter:{topicSlug:"e-commerce",sort:"-publishedDate",limit:12,offset:0},booksByTopicCollection:[{type:"book",id:"5456",title:"E-Business",subtitle:"State of the Art of ICT Based Challenges and Solutions",isOpenForSubmission:!1,hash:"f24674bb31f96703b5d2f207e834f420",slug:"e-business-state-of-the-art-of-ict-based-challenges-and-solutions",bookSignature:"Dragan Perakovic",coverURL:"https://cdn.intechopen.com/books/images_new/5456.jpg",editedByType:"Edited by",editors:[{id:"13092",title:"Associate Prof.",name:"Dragan",middleName:null,surname:"Perakovic",slug:"dragan-perakovic",fullName:"Dragan Perakovic"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}},{type:"book",id:"3718",title:"E-commerce",subtitle:null,isOpenForSubmission:!1,hash:null,slug:"e-commerce",bookSignature:"Kyeong Kang",coverURL:"https://cdn.intechopen.com/books/images_new/3718.jpg",editedByType:"Edited by",editors:[{id:"2114",title:"Dr.",name:"Kyeong",middleName:null,surname:"Kang",slug:"kyeong-kang",fullName:"Kyeong Kang"}],productType:{id:"1",chapterContentType:"chapter",authoredCaption:"Edited by"}}],booksByTopicTotal:2,mostCitedChapters:[{id:"10158",doi:"10.5772/8905",title:"Can a Recommender System Induce Serendipitous Encounters?",slug:"can-a-recommender-system-induce-serendipitous-encounters-",totalDownloads:2072,totalCrossrefCites:10,totalDimensionsCites:16,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Leo Iaquinta, Marco de Gemmis, Pasquale Lops, Giovanni Semeraro and Piero Molino",authors:null},{id:"10148",doi:"10.5772/8895",title:"Electronic Commerce Readiness in Developing Countries: The Case of the Chinese Grocery Industry",slug:"electronic-commerce-readiness-in-developing-countries-the-case-of-the-chinese-grocery-industry",totalDownloads:2962,totalCrossrefCites:3,totalDimensionsCites:7,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Sherah Kurnia and Fei Peng",authors:null},{id:"10160",doi:"10.5772/8907",title:"TECTAM: An Approach to Study Technology Acceptance Model (TAM) in Gaining Knowledge on the Adoption and Use of E-Commerce/E-Business Technology among Small and Medium Enterprises in Thailand",slug:"tectam-an-approach-to-study-technology-acceptance-model-tam-in-gaining-knowledge-on-the-adoption-and",totalDownloads:3106,totalCrossrefCites:6,totalDimensionsCites:5,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Vasin Chooprayoon and Chun Che Fung",authors:null}],mostDownloadedChaptersLast30Days:[{id:"53850",title:"Challenges of Information and Communication Technologies Usage in E-Business Systems",slug:"challenges-of-information-and-communication-technologies-usage-in-e-business-systems",totalDownloads:1447,totalCrossrefCites:0,totalDimensionsCites:1,book:{slug:"e-business-state-of-the-art-of-ict-based-challenges-and-solutions",title:"E-Business",fullTitle:"E-Business - State of the Art of ICT Based Challenges and Solutions"},signatures:"Marko Periša, Ivan Cvitić and Peter Kolarovszki",authors:[{id:"174543",title:"Dr.",name:"Marko",middleName:null,surname:"Periša",slug:"marko-perisa",fullName:"Marko Periša"}]},{id:"53280",title:"Customers’ Online Interaction Experiences with Fashion Brands: E-Information and E-Buying",slug:"customers-online-interaction-experiences-with-fashion-brands-e-information-and-e-buying",totalDownloads:947,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"e-business-state-of-the-art-of-ict-based-challenges-and-solutions",title:"E-Business",fullTitle:"E-Business - State of the Art of ICT Based Challenges and Solutions"},signatures:"Sandra Maria Correia Loureiro and Marlene Amorim",authors:[{id:"112943",title:"Prof.",name:"Sandra",middleName:"Maria Correia",surname:"Loureiro",slug:"sandra-loureiro",fullName:"Sandra Loureiro"},{id:"190959",title:"Prof.",name:"Marlene",middleName:null,surname:"Amorim",slug:"marlene-amorim",fullName:"Marlene Amorim"}]},{id:"53520",title:"CSFs for SMEs in Measuring e-Commerce Success",slug:"csfs-for-smes-in-measuring-e-commerce-success",totalDownloads:929,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"e-business-state-of-the-art-of-ict-based-challenges-and-solutions",title:"E-Business",fullTitle:"E-Business - State of the Art of ICT Based Challenges and Solutions"},signatures:"Mingxuan Wu, Ergun Gide, Rod Jewell and Li Zhang",authors:[{id:"190913",title:"Dr.",name:"Robert",middleName:null,surname:"Wu",slug:"robert-wu",fullName:"Robert Wu"},{id:"195354",title:"Prof.",name:"Ergun",middleName:null,surname:"Gide",slug:"ergun-gide",fullName:"Ergun Gide"},{id:"199142",title:"Dr.",name:"Rod",middleName:null,surname:"Jewell",slug:"rod-jewell",fullName:"Rod Jewell"},{id:"201392",title:"Prof.",name:"Li",middleName:null,surname:"Zhang",slug:"li-zhang",fullName:"Li Zhang"}]},{id:"10148",title:"Electronic Commerce Readiness in Developing Countries: The Case of the Chinese Grocery Industry",slug:"electronic-commerce-readiness-in-developing-countries-the-case-of-the-chinese-grocery-industry",totalDownloads:2962,totalCrossrefCites:3,totalDimensionsCites:7,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Sherah Kurnia and Fei Peng",authors:null},{id:"10150",title:"Consumer Responses to Colors of E-Commerce Websites: an Empirical Investigation",slug:"consumer-responses-to-colors-of-e-commerce-websites-an-empirical-investigation",totalDownloads:3214,totalCrossrefCites:3,totalDimensionsCites:3,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Jean-Eric Pelet and Panagiota Papadopoulou",authors:null},{id:"10158",title:"Can a Recommender System Induce Serendipitous Encounters?",slug:"can-a-recommender-system-induce-serendipitous-encounters-",totalDownloads:2072,totalCrossrefCites:10,totalDimensionsCites:16,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Leo Iaquinta, Marco de Gemmis, Pasquale Lops, Giovanni Semeraro and Piero Molino",authors:null},{id:"10154",title:"Attacks on Two Buyer-Seller Watermarking Protocols and an Improvement for Revocable Anonymity",slug:"attacks-on-two-buyer-seller-watermarking-protocols-and-an-improvement-for-revocable-anonymity",totalDownloads:1513,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Mina Deng and Bart Preneel",authors:null},{id:"10157",title:"A Framework for Quality Assurance of Electronic Commerce Websites",slug:"a-framework-for-quality-assurance-of-electronic-commerce-websites",totalDownloads:4594,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"e-commerce",title:"E-commerce",fullTitle:"E-commerce"},signatures:"Zain Balfagih, Norshidah Mohamed and Murni Mahmud",authors:null},{id:"53756",title:"A Proposal for Brand Analysis with Opinion Mining",slug:"a-proposal-for-brand-analysis-with-opinion-mining",totalDownloads:721,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"e-business-state-of-the-art-of-ict-based-challenges-and-solutions",title:"E-Business",fullTitle:"E-Business - State of the Art of ICT Based Challenges and Solutions"},signatures:"Francisco Javier Moreno Arboleda, Gustavo Andrés Angarita\nVelásquez and Gustavo León Preciado Jiménez",authors:[{id:"190218",title:"Ph.D.",name:"Francisco",middleName:null,surname:"Moreno",slug:"francisco-moreno",fullName:"Francisco Moreno"},{id:"195567",title:"BSc.",name:"Gustavo Andrés",middleName:null,surname:"Angarita Velásquez",slug:"gustavo-andres-angarita-velasquez",fullName:"Gustavo Andrés Angarita Velásquez"},{id:"195568",title:"BSc.",name:"Gustavo León",middleName:null,surname:"Preciado Jiménez",slug:"gustavo-leon-preciado-jimenez",fullName:"Gustavo León Preciado Jiménez"}]},{id:"53057",title:"Payments Systems Determination by Universal Financial Industry Message Scheme According to Single Euro Payments Area",slug:"payments-systems-determination-by-universal-financial-industry-message-scheme-according-to-single-eu",totalDownloads:854,totalCrossrefCites:0,totalDimensionsCites:0,book:{slug:"e-business-state-of-the-art-of-ict-based-challenges-and-solutions",title:"E-Business",fullTitle:"E-Business - State of the Art of ICT Based Challenges and Solutions"},signatures:"Slobodan Nikola Babić",authors:[{id:"189232",title:"Dr.",name:"Slobodan",middleName:"Nikola",surname:"Babić",slug:"slobodan-babic",fullName:"Slobodan Babić"}]}],onlineFirstChaptersFilter:{topicSlug:"e-commerce",limit:3,offset:0},onlineFirstChaptersCollection:[],onlineFirstChaptersTotal:0},preDownload:{success:null,errors:{}},aboutIntechopen:{},privacyPolicy:{},peerReviewing:{},howOpenAccessPublishingWithIntechopenWorks:{},sponsorshipBooks:{sponsorshipBooks:[{type:"book",id:"6837",title:"Lithium-ion Batteries - Thin Film for Energy Materials and Devices",subtitle:null,isOpenForSubmission:!0,hash:"ea7789260b319b9a4b472257f57bfeb5",slug:null,bookSignature:"Prof. Mitsunobu Sato, Dr. Li Lu and Dr. Hiroki Nagai",coverURL:"https://cdn.intechopen.com/books/images_new/6837.jpg",editedByType:null,editors:[{id:"179615",title:"Prof.",name:"Mitsunobu",middleName:null,surname:"Sato",slug:"mitsunobu-sato",fullName:"Mitsunobu Sato"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9423",title:"Applications of Artificial Intelligence in Process Industry Automation, Heat and Power Generation and Smart Manufacturing",subtitle:null,isOpenForSubmission:!0,hash:"10ac8fb0bdbf61044395963028653d21",slug:null,bookSignature:"Prof. Konstantinos G. Kyprianidis and Prof. Erik Dahlquist",coverURL:"https://cdn.intechopen.com/books/images_new/9423.jpg",editedByType:null,editors:[{id:"35868",title:"Prof.",name:"Konstantinos",middleName:"G.",surname:"Kyprianidis",slug:"konstantinos-kyprianidis",fullName:"Konstantinos Kyprianidis"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"9428",title:"New Trends in the Use of Artificial Intelligence for the Industry 4.0",subtitle:null,isOpenForSubmission:!0,hash:"9e089eec484ce8e9eb32198c2d8b34ea",slug:null,bookSignature:"Dr. Luis Romeral Martinez, Dr. Roque A. Osornio-Rios and Dr. Miguel Delgado Prieto",coverURL:"https://cdn.intechopen.com/books/images_new/9428.jpg",editedByType:null,editors:[{id:"86501",title:"Dr.",name:"Luis",middleName:null,surname:"Romeral Martinez",slug:"luis-romeral-martinez",fullName:"Luis Romeral Martinez"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10107",title:"Artificial Intelligence in Oncology Drug Discovery & Development",subtitle:null,isOpenForSubmission:!0,hash:"043c178c3668865ab7d35dcb2ceea794",slug:null,bookSignature:"Dr. John Cassidy and Dr. Belle Taylor",coverURL:"https://cdn.intechopen.com/books/images_new/10107.jpg",editedByType:null,editors:[{id:"244455",title:"Dr.",name:"John",middleName:null,surname:"Cassidy",slug:"john-cassidy",fullName:"John Cassidy"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"8903",title:"Carbon Based Material for Environmental Protection and Remediation",subtitle:null,isOpenForSubmission:!0,hash:"19da699b370f320eca63ef2ba02f745d",slug:null,bookSignature:"Dr. Mattia Bartoli and Dr. Marco Frediani",coverURL:"https://cdn.intechopen.com/books/images_new/8903.jpg",editedByType:null,editors:[{id:"188999",title:"Dr.",name:"Mattia",middleName:null,surname:"Bartoli",slug:"mattia-bartoli",fullName:"Mattia Bartoli"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10132",title:"Applied Computational Near-surface Geophysics - From Integral and Derivative Formulas to MATLAB Codes",subtitle:null,isOpenForSubmission:!0,hash:"38cdbbb671df620b36ee96af1d9a3a90",slug:null,bookSignature:"Dr. Afshin Aghayan",coverURL:"https://cdn.intechopen.com/books/images_new/10132.jpg",editedByType:null,editors:[{id:"311030",title:"Dr.",name:"Afshin",middleName:null,surname:"Aghayan",slug:"afshin-aghayan",fullName:"Afshin Aghayan"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10110",title:"Advances and Technologies in Building Construction and Structural Analysis",subtitle:null,isOpenForSubmission:!0,hash:"df2ad14bc5588577e8bf0b7ebcdafd9d",slug:null,bookSignature:"Dr. Ali Kaboli and Dr. Sara Shirowzhan",coverURL:"https://cdn.intechopen.com/books/images_new/10110.jpg",editedByType:null,editors:[{id:"309192",title:"Dr.",name:"Ali",middleName:null,surname:"Kaboli",slug:"ali-kaboli",fullName:"Ali Kaboli"}],productType:{id:"1",chapterContentType:"chapter"}},{type:"book",id:"10175",title:"Ethics in Emerging Technologies",subtitle:null,isOpenForSubmission:!0,hash:"9c92da249676e35e2f7476182aa94e84",slug:null,bookSignature:"Prof. Ali Hessami",coverURL:"https://cdn.intechopen.com/books/images_new/10175.jpg",editedByType:null,editors:[{id:"108303",title:"Prof.",name:"Ali",middleName:null,surname:"Hessami",slug:"ali-hessami",fullName:"Ali Hessami"}],productType:{id:"1",chapterContentType:"chapter"}}],offset:8,limit:8,total:16},humansInSpaceProgram:{},teamHumansInSpaceProgram:{},route:{name:"profile.detail",path:"/profiles/41245/young-tak-lee",hash:"",query:{},params:{id:"41245",slug:"young-tak-lee"},fullPath:"/profiles/41245/young-tak-lee",meta:{},from:{name:null,path:"/",hash:"",query:{},params:{},fullPath:"/",meta:{}}}},function(){var e;(e=document.currentScript||document.scripts[document.scripts.length-1]).parentNode.removeChild(e)}()