Chapters authored
A Review of Surface Treatments for Sliding Bearings Used at Different Temperature
The boundary lubrication and dry friction of plain bearings at different work temperature are unable to be avoided under the start and stop condition. The poor lubrication is one reason of bearing broken. In order to improve the tribological properties and select the best treatment for different bearings used at different temperature, the studies of different treatment technologies are reviewed in this paper. The review shows that the shortages of bonding fiber woven materials, inlaying solid lubricating materials, electro plating and magnetron sputtering are poor temperature resistance, low load capacity, environment pollution and low production efficiencies respectively. Based on the analyses and summaries, the liquid dope spraying and thermal powder spraying are suggested to deposit coating on the surface of bearing which working temperature is lower than 200 and above 800°C respectively. However, the technology processes, the mechanisms of spraying and self-lubrication materials should be studied further and deeply.
Part of the book: Friction, Lubrication and Wear