Mohammad Mirbagheri

Amirkabir University of TechnologyIran

At present: Assistant Professor, Department of Metallurgical Engineering 1-1997–203; Ph.D. in Materials Science and Engineering, Sharif University of Technology, Tehran, Iran 2-1991–1993; M.Sc. in Metallurgical Engineering, Sharif University of Technology, Tehran, Iran 3-1987–1991; B.Sc. in Materials Engineering, Isfahan University of Technology, Isfahan, Iran Some publications:______>>> •E. Khajeh, S.M.H MirbagheriA Criterion for the Formation and Distribution of Micro-Shrinkages in Wide Freezing Range Alloys based on the Critical PermeabilityJ. Materials processing technology,revised , 2007 •- S.M.H. Mirbagheri,”Modeling of effect of the ferrous chills and pressure on the heat transfer coefficient in metal / preheated chill interface”, Material letters, in press (http://www.sciencedirect.com)2007 •- E. Khajeh, S.M.H Mirbagheri,”Modeling and simulation of the equiaxed dendritic structures permeability for Pb-Sn alloys” Materials Science and Technology, in press (http://www.sciencedirect.com)2007 •- E. Khajeh , S.M.H. Mirbagheri, P. Davami Modeling of permeability with the aid of 3D interdendritic flow simulation for equiaxed dendritic structures Materials Science and Engineering A, Volume 427, Issues 1-2, 15 July 2006 •- S. M. H. Mirbagheri, M. Shrinparvar, P. Davami, Modeling of metal-mold interface resistance in the Al-11.5 wt% Si alloy casting process, Journal of scientia Iranica issue Civil and Mechanical Engineering, vol: 14, No.4, winter. 2006, •- S.M.H. Mirbagheri “Modeling of metal-mould interface resistance in the A356 aluminum alloy casting process”, journal Communications in Numerical Methods in Engineering, Vol: 93 (2006), 1-21. •- S.M.H. Mirbagheri, M. Shirinparvar, and A.Chirazi” Modeling of metalo-static pressure on the metal-mould interface thermal resistance in the casting process” Journal of Materials & Design, Volume 28, Issue 7, 2007, Pages 2106-2112 •- S.M.H. Mirbagheri, A. Chirazi, “Modeling of solute effect on the permeability for columnar dendrite structures during solidification of mushy alloy” Iranian journal of materials engineering, Vol: 2 Number: 3(2005) 13-19 •- S.M.H. Mirbagheri “Simulation of interdendritic liquid permeability for low and high solid fraction during solidification of mushy alloy” Journal of scientia Iranica issue Civil and Mechanical Engineerin, vol: 13, No.3, sum. 2006, pp 316-325 •- S.M.H. Mirbagheri and Ali Chirazi “Simulation of interdendritic liquid permeability for low and high solid fractions during solidification of mushy alloys” journal: Materials Science & Engineering A427 (2006) 51–59 •- S Serajzadeh and S M H Mirbagheri, “A model for determination of austenite decomposition kinetics during continuous cooling on the run-out table” Modeling Simul. Mater. Sci. Eng. 14 (2006) 217–228 •- S M. H. Mirbagheri, and J. silk “Simulation of Si concentration effect on the permeability for columnar dendrite structures during solidification of Al-Si alloy” Materials & Design, Volume 28, Issue 1, 2007, Pages 356-361 •- S M. H. Mirbagheri, S. Serajzadeh, N. Varahram, and P. Davami, “Modeling of foam degradation in lost foam casting process- part II” Journal of Materials & Design, Vol: 27 (2006) 115–124 •- S.M.H. Mirbagheri, H. Ashouri, N. Varahram, and P. Davami. ”Mathematical modeling of the effect of foam degradation in on mould filling in the Grey Iron EPC Process” Iranian Journal of Materials Science & Engineering. Vol. 1, No. 2, 2-63, 2004 •- S. Serajzadeh, S. M. H. Mirbagheri, A. Karimi-taheri and S. M. Zebarjad “Modeling of metal flow during hot forging with regard to micro structural aspects”, International Journal of Machine Tools and Manufacture, Vol. 44, No. 14, 1537-1545, 2004 •- -S M. H. Mirbagheri, H. Ashory, M. Shrinparvar, P. Davami, “Simulation of Surface Roughness on the Flow Pattern in the Casting Process” Journal of Materials & Design, Vol: 25, 8 (2004) 655-661 •-S.M.H. Mirbagheri, M. Serajzadeh, A.K.Taheri and P. Davami. ”Modeling the Effect of Mould Roughness on the Flow Pattern in die casting” Applied Mathematical Modeling, Vol: 28 (2004) 933–956 •- S.M.H. Mirbagheri, J. Silk and P. Davami. ”Modeling of foam degradation in the lost foam casting Process” Journal of Materials Science. 39 (2004) 4593 – 4603

1chapters authored