Tengiz Nadiradze

By George Tumanishvili, Tengiz Nadiradze and Giorgi Tumanishvili

The methods of estimation and prediction of tribological properties of the contact zone of interacting elements of machines are characterized by the low informativeness and accuracy that complicates provision of the proper tribological properties and hinders reliable and effective operation of machines. For obtaining more wide information about factors influencing tribological properties of the interacting surfaces, the experimental researches on the high speed (up to 70-m/s) and serial twin-disk machines were carried out. Our researches have shown that with different properties and degrees of destruction of the third body, the coefficient of friction can change up to 10 times or more, the wear rate up to 102-104 times, etc. This was the basis for a new concept of the mechanism of variation of tribological properties of interacting surfaces. The researches have shown a dependence of tribological properties of the contact zone on the properties and destruction degree of the third body that was assumed as a basis of new concept of the mechanism of variation of tribological properties of these surfaces. The monitoring of the third body destruction onset and development was carried out in the laboratory conditions and a criterion of the third body destruction was developed. The reasons of the negative, neutral and positive friction and mild, severe and catastrophic wear are shown.

Part of the book: Tribology in Materials and Manufacturing